[people/ms/u-boot.git] / include / configs / sbc8560.h

/*
 * (C) Copyright 2002,2003 Motorola,Inc.
 * Xianghua Xiao <X.Xiao@motorola.com>
 *
 * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
 * Added support for Wind River SBC8560 board
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/* sbc8560 board configuration file */
/* please refer to doc/README.sbc8560 for more info */
/* make sure you change the MAC address and other network params first,
 * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE			*/
#define CONFIG_E500		1	/* BOOKE e500 family		*/
#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/


#define CONFIG_CPM2		1	/* has CPM2 */
#define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
#define CONFIG_MPC8560		1

/* XXX flagging this as something I might want to delete */
#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/

#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
#undef	CONFIG_PCI			/* pci ethernet support		*/
#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

#define CONFIG_ENV_OVERWRITE

/* Using Localbus SDRAM to emulate flash before we can program the flash,
 * normally you need a flash-boot image(u-boot.bin), if so undef this.
 */
#undef CONFIG_RAM_AS_FLASH

#if defined(CONFIG_PCI_66)		/* some PCI card is 33Mhz only	*/
  #define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
#else
  #define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
#endif

/* below can be toggled for performance analysis. otherwise use default */
#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
#undef	CONFIG_BTB			    /* toggle branch predition	*/
#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/

#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/

#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
#define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
#define CONFIG_SYS_MEMTEST_END		0x00400000

#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
#endif

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/

#if XXX
  #define CONFIG_SYS_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
#else
  #define CONFIG_SYS_CCSRBAR		0xff700000	/* default CCSRBAR	*/
#endif
#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/

#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */

/* DDR Setup */
#define CONFIG_FSL_DDR1
#undef CONFIG_FSL_DDR_INTERACTIVE
#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
#undef  CONFIG_DDR_SPD

#if defined(CONFIG_MPC85xx_REV1)
  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
#endif

#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE	0xDeadBeef

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	2

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS	0x55	/* CTLR 0 DIMM 0 */

#undef CONFIG_CLOCKS_IN_MHZ

#if defined(CONFIG_RAM_AS_FLASH)
  #define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
  #define CONFIG_SYS_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
  #define CONFIG_SYS_BR0_PRELIM	0xf8000801      /* port size 8bit */
  #define CONFIG_SYS_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
#else /* Boot from real Flash */
  #define CONFIG_SYS_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
  #define CONFIG_SYS_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
  #define CONFIG_SYS_BR0_PRELIM	0xff800801      /* port size 8bit      */
  #define CONFIG_SYS_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
#endif
#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/

/* local bus definitions */
#define CONFIG_SYS_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
#define CONFIG_SYS_OR1_PRELIM		0xfc000ff7

#define CONFIG_SYS_BR2_PRELIM		0x00000000	/* CS2 not used */
#define CONFIG_SYS_OR2_PRELIM		0x00000000

#define CONFIG_SYS_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
#define CONFIG_SYS_OR3_PRELIM		0xfc000cc1

#if defined(CONFIG_RAM_AS_FLASH)
  #define CONFIG_SYS_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
#else
  #define CONFIG_SYS_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
#endif
#define CONFIG_SYS_OR4_PRELIM		0xfc000cc1

#define CONFIG_SYS_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
#if 1
  #define CONFIG_SYS_OR5_PRELIM	0xff000ff7
#else
  #define CONFIG_SYS_OR5_PRELIM	0xff0000f0
#endif

#define CONFIG_SYS_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
#define CONFIG_SYS_OR6_PRELIM		0xfc000ff7
#define CONFIG_SYS_LBC_LCRR		0x00030002	/* local bus freq	*/
#define CONFIG_SYS_LBC_LBCR		0x00000000
#define CONFIG_SYS_LBC_LSRT		0x20000000
#define CONFIG_SYS_LBC_MRTPR		0x20000000
#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723

/* just hijack the MOT BCSR def for SBC8560 misc devices */
#define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
/* the size of CS5 needs to be >= 16M for TLB and LAW setups */

#define CONFIG_L1_INIT_RAM
#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/* Serial Port */
#undef  CONFIG_CONS_ON_SCC	/* define if console on SCC */
#undef	CONFIG_CONS_NONE	/* define if console on something else */

#define CONFIG_CONS_INDEX	1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		1843200 /* get_bus_freq(0) */
#define CONFIG_BAUDRATE		9600

#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT                1
#define CONFIG_OF_BOARD_SETUP           1
#define CONFIG_OF_STDOUT_VIA_ALIAS      1

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
#define CONFIG_SYS_I2C_OFFSET		0x3000

#define CONFIG_SYS_PCI_MEM_BASE	0xC0000000
#define CONFIG_SYS_PCI_MEM_PHYS	0xC0000000
#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000

#ifdef CONFIG_TSEC_ENET

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 	1
#endif

#ifndef CONFIG_MII
#define CONFIG_MII		1	/* MII PHY management */
#endif
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"TSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"TSEC1"
#define TSEC1_PHY_ADDR		0x19
#define TSEC2_PHY_ADDR		0x1a
#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT

/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME		"TSEC0"

#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */

  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */

  #if (CONFIG_ETHER_INDEX == 2)
    /*
     * - Rx-CLK is CLK13
     * - Tx-CLK is CLK14
     * - Select bus for bd/buffers
     * - Full duplex
     */
    #define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
    #define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
    #define CONFIG_SYS_CPMFCR_RAMTYPE	0
    #define CONFIG_SYS_FCC_PSMR	(FCC_PSMR_FDE)

  #elif (CONFIG_ETHER_INDEX == 3)
    /* need more definitions here for FE3 */
  #endif				/* CONFIG_ETHER_INDEX */

  #define CONFIG_MII			/* MII PHY management */
  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
  /*
   * GPIO pins used for bit-banged MII communications
   */
  #define MDIO_PORT	2		/* Port C */
  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)

  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
			else	iop->pdat &= ~0x00400000

  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
			else	iop->pdat &= ~0x00200000

  #define MIIDELAY	udelay(1)

#endif

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant	*/
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver	*/
#if 0
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection	*/
#endif
#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/

#undef	CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT	200000	/* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	50000	/* Timeout for Flash Write (in ms) */

#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor	*/

#if 0
/* XXX This doesn't work and I don't want to fix it */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
  #define CONFIG_SYS_RAMBOOT
#else
  #undef  CONFIG_SYS_RAMBOOT
#endif
#endif

/* Environment */
#if !defined(CONFIG_SYS_RAMBOOT)
  #if defined(CONFIG_RAM_AS_FLASH)
    #define CONFIG_ENV_IS_NOWHERE
    #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x100000)
    #define CONFIG_ENV_SIZE	0x2000
  #else
    #define CONFIG_ENV_IS_IN_FLASH	1
    #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
    #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
    #define CONFIG_ENV_SIZE	0x2000 /* CONFIG_ENV_SECT_SIZE */
  #endif
#else
  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
  #define CONFIG_ENV_SIZE		0x2000
#endif

#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
    #define CONFIG_CMD_MII
#endif

#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
    #undef CONFIG_CMD_ENV
    #undef CONFIG_CMD_LOADS
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot		*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#endif

/* You can compile in a MAC address and your custom net settings by using
 * the following syntax.  Your board should be marked with the assigned
 * MAC addresses directly on it.
 *
 * #define CONFIG_ETHADDR		de:ad:be:ef:00:00
 * #define CONFIG_ETH1ADDR		fa:ke:ad:dr:es:s!
 * #define CONFIG_SERVERIP		<server ip>
 * #define CONFIG_IPADDR		<board ip>
 * #define CONFIG_GATEWAYIP		<gateway ip>
 * #define CONFIG_NETMASK		<your netmask>
 */

#define CONFIG_HOSTNAME		SBC8560
#define CONFIG_ROOTPATH		/home/ppc
#define CONFIG_BOOTFILE		uImage

#define	CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"consoledev=ttyS0\0"				\
	"ramdiskaddr=2000000\0"			\
	"ramdiskfile=ramdisk.uboot\0"			\
	"fdtaddr=c00000\0"				\
	"fdtfile=sbc8560.dtb\0"

#define CONFIG_NFSBOOTCOMMAND						\
	"setenv bootargs root=/dev/nfs rw "				\
		"nfsroot=$serverip:$rootpath "				\
		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
		"console=$consoledev,$baudrate $othbootargs;"		\
	"tftp $loadaddr $bootfile;"					\
	"tftp $fdtaddr $fdtfile;"					\
	"bootm $loadaddr - $fdtaddr"


#define CONFIG_RAMBOOTCOMMAND \
	"setenv bootargs root=/dev/ram rw "				\
		"console=$consoledev,$baudrate $othbootargs;"		\
	"tftp $ramdiskaddr $ramdiskfile;"				\
	"tftp $loadaddr $bootfile;"					\
	"tftp $fdtaddr $fdtfile;"					\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
10a36a98 WD	1	/*
	2	* (C) Copyright 2002,2003 Motorola,Inc.
	3	* Xianghua Xiao <X.Xiao@motorola.com>
	4	*
	5	* (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
	6	* Added support for Wind River SBC8560 board
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
37fef499 PG	27	/* sbc8560 board configuration file */
37fef499 PG	28	/* please refer to doc/README.sbc8560 for more info */
10a36a98 WD	29	/* make sure you change the MAC address and other network params first,
	30	* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
	31	*/
	32
	33	#ifndef __CONFIG_H
	34	#define __CONFIG_H
	35
	36	/* High Level Configuration Options */
	37	#define CONFIG_BOOKE 1 /* BOOKE */
	38	#define CONFIG_E500 1 /* BOOKE e500 family */
	39	#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
	40	#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
	41
	42
9c4c5ae3	43	#define CONFIG_CPM2 1 /* has CPM2 */
10a36a98	44	#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
f060054d	45	#define CONFIG_MPC8560 1
10a36a98 WD	46
	47	/* XXX flagging this as something I might want to delete */
	48	#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
	49
	50	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	51	#undef CONFIG_PCI /* pci ethernet support */
	52	#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
	53
e2b159d0	54	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
10a36a98 WD	55
	56	#define CONFIG_ENV_OVERWRITE
	57
	58	/* Using Localbus SDRAM to emulate flash before we can program the flash,
	59	* normally you need a flash-boot image(u-boot.bin), if so undef this.
	60	*/
	61	#undef CONFIG_RAM_AS_FLASH
	62
	63	#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */
	64	#define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */
	65	#else
	66	#define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */
	67	#endif
	68
	69	/* below can be toggled for performance analysis. otherwise use default */
	70	#define CONFIG_L2_CACHE /* toggle L2 cache */
	71	#undef CONFIG_BTB /* toggle branch predition */
	72	#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
	73
	74	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	75
6d0f6bcf JCPV	76	#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
	77	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
	78	#define CONFIG_SYS_MEMTEST_END 0x00400000
10a36a98 WD	79
	80	#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) \|\| \
	81	defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) \|\| \
	82	defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
	83	#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
	84	#endif
	85
	86	/*
	87	* Base addresses -- Note these are effective addresses where the
	88	* actual resources get mapped (not physical addresses)
	89	*/
6d0f6bcf	90	#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
10a36a98 WD	91
10a36a98 WD	92	#if XXX
6d0f6bcf	93	#define CONFIG_SYS_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
10a36a98	94	#else
6d0f6bcf	95	#define CONFIG_SYS_CCSRBAR 0xff700000 /* default CCSRBAR */
10a36a98	96	#endif
6d0f6bcf JCPV	97	#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
6d0f6bcf JCPV	98	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
10a36a98	99
6d0f6bcf	100	#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
10a36a98	101
8e55313b KG	102	/* DDR Setup */
	103	#define CONFIG_FSL_DDR1
	104	#undef CONFIG_FSL_DDR_INTERACTIVE
	105	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
	106	#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
	107	#undef CONFIG_DDR_SPD
10a36a98 WD	108
10a36a98 WD	109	#if defined(CONFIG_MPC85xx_REV1)
8e55313b	110	#define CONFIG_DDR_DLL /* possible DLL fix needed */
10a36a98 WD	111	#endif
10a36a98 WD	112
8e55313b KG	113	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
	114	#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	115	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	116
6d0f6bcf JCPV	117	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
6d0f6bcf JCPV	118	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
8e55313b KG	119	#define CONFIG_VERY_BIG_RAM
	120
	121	#define CONFIG_NUM_DDR_CONTROLLERS 1
	122	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	123	#define CONFIG_CHIP_SELECTS_PER_CTRL 2
	124
	125	/* I2C addresses of SPD EEPROMs */
	126	#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */
	127
10a36a98 WD	128	#undef CONFIG_CLOCKS_IN_MHZ
	129
	130	#if defined(CONFIG_RAM_AS_FLASH)
6d0f6bcf JCPV	131	#define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
	132	#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */
	133	#define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */
	134	#define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */
10a36a98	135	#else /* Boot from real Flash */
6d0f6bcf JCPV	136	#define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
	137	#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */
	138	#define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */
	139	#define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */
10a36a98	140	#endif
6d0f6bcf	141	#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
10a36a98 WD	142
10a36a98 WD	143	/* local bus definitions */
6d0f6bcf JCPV	144	#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */
6d0f6bcf JCPV	145	#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7
10a36a98	146
6d0f6bcf JCPV	147	#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */
6d0f6bcf JCPV	148	#define CONFIG_SYS_OR2_PRELIM 0x00000000
10a36a98	149
6d0f6bcf JCPV	150	#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
6d0f6bcf JCPV	151	#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1
10a36a98 WD	152
10a36a98 WD	153	#if defined(CONFIG_RAM_AS_FLASH)
6d0f6bcf	154	#define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */
10a36a98	155	#else
6d0f6bcf	156	#define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */
10a36a98	157	#endif
6d0f6bcf	158	#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1
10a36a98	159
6d0f6bcf	160	#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */
10a36a98	161	#if 1
6d0f6bcf	162	#define CONFIG_SYS_OR5_PRELIM 0xff000ff7
10a36a98	163	#else
6d0f6bcf	164	#define CONFIG_SYS_OR5_PRELIM 0xff0000f0
10a36a98 WD	165	#endif
10a36a98 WD	166
6d0f6bcf JCPV	167	#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */
	168	#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7
	169	#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */
	170	#define CONFIG_SYS_LBC_LBCR 0x00000000
	171	#define CONFIG_SYS_LBC_LSRT 0x20000000
	172	#define CONFIG_SYS_LBC_MRTPR 0x20000000
	173	#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723
	174	#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723
	175	#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723
	176	#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723
	177	#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723
10a36a98 WD	178
10a36a98 WD	179	/* just hijack the MOT BCSR def for SBC8560 misc devices */
6d0f6bcf	180	#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)\|0x00400000)
10a36a98 WD	181	/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
	182
	183	#define CONFIG_L1_INIT_RAM
6d0f6bcf JCPV	184	#define CONFIG_SYS_INIT_RAM_LOCK 1
	185	#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */
	186	#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
10a36a98	187
6d0f6bcf JCPV	188	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
	189	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	190	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
10a36a98	191
6d0f6bcf JCPV	192	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
6d0f6bcf JCPV	193	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
10a36a98 WD	194
10a36a98 WD	195	/* Serial Port */
c158bcac PG	196	#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
c158bcac PG	197	#undef CONFIG_CONS_NONE /* define if console on something else */
10a36a98 WD	198
	199	#define CONFIG_CONS_INDEX 1
	200	#undef CONFIG_SERIAL_SOFTWARE_FIFO
6d0f6bcf JCPV	201	#define CONFIG_SYS_NS16550
	202	#define CONFIG_SYS_NS16550_SERIAL
	203	#define CONFIG_SYS_NS16550_REG_SIZE 1
	204	#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */
10a36a98 WD	205	#define CONFIG_BAUDRATE 9600
10a36a98 WD	206
6d0f6bcf	207	#define CONFIG_SYS_BAUDRATE_TABLE \
10a36a98 WD	208	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
10a36a98 WD	209
6d0f6bcf JCPV	210	#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
6d0f6bcf JCPV	211	#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
10a36a98 WD	212
10a36a98 WD	213	/* Use the HUSH parser */
6d0f6bcf JCPV	214	#define CONFIG_SYS_HUSH_PARSER
	215	#ifdef CONFIG_SYS_HUSH_PARSER
	216	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
10a36a98 WD	217	#endif
10a36a98 WD	218
c3ca7e5e PG	219	/* pass open firmware flat tree */
	220	#define CONFIG_OF_LIBFDT 1
	221	#define CONFIG_OF_BOARD_SETUP 1
	222	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
	223
20476726 JL	224	/*
	225	* I2C
	226	*/
	227	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	228	#define CONFIG_HARD_I2C /* I2C with hardware support*/
10a36a98	229	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf JCPV	230	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
	231	#define CONFIG_SYS_I2C_SLAVE 0x7F
	232	#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
	233	#define CONFIG_SYS_I2C_OFFSET 0x3000
10a36a98	234
6d0f6bcf JCPV	235	#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000
	236	#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000
	237	#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
10a36a98	238
6de5bf24 PG	239	#ifdef CONFIG_TSEC_ENET
	240
	241	#ifndef CONFIG_NET_MULTI
	242	#define CONFIG_NET_MULTI 1
	243	#endif
	244
	245	#ifndef CONFIG_MII
	246	#define CONFIG_MII 1 /* MII PHY management */
	247	#endif
	248	#define CONFIG_TSEC1 1
	249	#define CONFIG_TSEC1_NAME "TSEC0"
	250	#define CONFIG_TSEC2 1
	251	#define CONFIG_TSEC2_NAME "TSEC1"
	252	#define TSEC1_PHY_ADDR 0x19
	253	#define TSEC2_PHY_ADDR 0x1a
	254	#define TSEC1_PHYIDX 0
	255	#define TSEC2_PHYIDX 0
	256	#define TSEC1_FLAGS TSEC_GIGABIT
	257	#define TSEC2_FLAGS TSEC_GIGABIT
	258
	259	/* Options are: TSEC[0-1] */
	260	#define CONFIG_ETHPRIME "TSEC0"
10a36a98 WD	261
	262	#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
	263
	264	#undef CONFIG_ETHER_NONE /* define if ether on something else */
	265	#define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */
	266	#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
	267
	268	#if (CONFIG_ETHER_INDEX == 2)
	269	/*
	270	* - Rx-CLK is CLK13
	271	* - Tx-CLK is CLK14
	272	* - Select bus for bd/buffers
	273	* - Full duplex
	274	*/
6d0f6bcf JCPV	275	#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
	276	#define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
	277	#define CONFIG_SYS_CPMFCR_RAMTYPE 0
	278	#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
10a36a98 WD	279
	280	#elif (CONFIG_ETHER_INDEX == 3)
	281	/* need more definitions here for FE3 */
	282	#endif /* CONFIG_ETHER_INDEX */
	283
	284	#define CONFIG_MII /* MII PHY management */
	285	#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
	286	/*
	287	* GPIO pins used for bit-banged MII communications
	288	*/
	289	#define MDIO_PORT 2 /* Port C */
	290	#define MDIO_ACTIVE (iop->pdir \|= 0x00400000)
	291	#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
	292	#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
	293
	294	#define MDIO(bit) if(bit) iop->pdat \|= 0x00400000; \
	295	else iop->pdat &= ~0x00400000
	296
	297	#define MDC(bit) if(bit) iop->pdat \|= 0x00200000; \
	298	else iop->pdat &= ~0x00200000
	299
	300	#define MIIDELAY udelay(1)
	301
	302	#endif
	303
	304	/*-----------------------------------------------------------------------
	305	* FLASH and environment organization
	306	*/
	307
6d0f6bcf	308	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	309	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
10a36a98	310	#if 0
6d0f6bcf JCPV	311	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
6d0f6bcf JCPV	312	#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */
10a36a98	313	#endif
6d0f6bcf JCPV	314	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
6d0f6bcf JCPV	315	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
10a36a98	316
6d0f6bcf JCPV	317	#undef CONFIG_SYS_FLASH_CHECKSUM
	318	#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
	319	#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
10a36a98	320
6d0f6bcf	321	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
10a36a98 WD	322
	323	#if 0
	324	/* XXX This doesn't work and I don't want to fix it */
6d0f6bcf JCPV	325	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
6d0f6bcf JCPV	326	#define CONFIG_SYS_RAMBOOT
10a36a98	327	#else
6d0f6bcf	328	#undef CONFIG_SYS_RAMBOOT
10a36a98 WD	329	#endif
	330	#endif
	331
	332	/* Environment */
6d0f6bcf	333	#if !defined(CONFIG_SYS_RAMBOOT)
10a36a98	334	#if defined(CONFIG_RAM_AS_FLASH)
93f6d725	335	#define CONFIG_ENV_IS_NOWHERE
6d0f6bcf	336	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000)
0e8d1586	337	#define CONFIG_ENV_SIZE 0x2000
10a36a98	338	#else
5a1aceb0	339	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586	340	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
6d0f6bcf	341	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
0e8d1586	342	#define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */
10a36a98 WD	343	#endif
10a36a98 WD	344	#else
6d0f6bcf	345	#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
93f6d725	346	#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
6d0f6bcf	347	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
0e8d1586	348	#define CONFIG_ENV_SIZE 0x2000
10a36a98 WD	349	#endif
10a36a98 WD	350
c158bcac	351	#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
10a36a98	352	/#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"/
10a36a98 WD	353	#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
	354
	355	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	356	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
10a36a98	357
2835e518	358
079a136c JL	359	/*
	360	* BOOTP options
	361	*/
	362	#define CONFIG_BOOTP_BOOTFILESIZE
	363	#define CONFIG_BOOTP_BOOTPATH
	364	#define CONFIG_BOOTP_GATEWAY
	365	#define CONFIG_BOOTP_HOSTNAME
	366
	367
2835e518 JL	368	/*
	369	* Command line configuration.
	370	*/
	371	#include <config_cmd_default.h>
	372
	373	#define CONFIG_CMD_PING
	374	#define CONFIG_CMD_I2C
	375
	376	#if defined(CONFIG_PCI)
	377	#define CONFIG_CMD_PCI
	378	#endif
	379
	380	#if defined(CONFIG_TSEC_ENET) \|\| defined(CONFIG_ETHER_ON_FCC)
	381	#define CONFIG_CMD_MII
	382	#endif
	383
6d0f6bcf	384	#if defined(CONFIG_SYS_RAMBOOT) \|\| defined(CONFIG_RAM_AS_FLASH)
2835e518 JL	385	#undef CONFIG_CMD_ENV
2835e518 JL	386	#undef CONFIG_CMD_LOADS
10a36a98 WD	387	#endif
10a36a98 WD	388
10a36a98 WD	389
	390	#undef CONFIG_WATCHDOG /* watchdog disabled */
	391
	392	/*
	393	* Miscellaneous configurable options
	394	*/
6d0f6bcf JCPV	395	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	396	#define CONFIG_SYS_PROMPT "SBC8560=> " /* Monitor Command Prompt */
2835e518	397	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	398	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
10a36a98	399	#else
6d0f6bcf	400	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
10a36a98	401	#endif
6d0f6bcf JCPV	402	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	403	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	404	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	405	#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
	406	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
10a36a98 WD	407
	408	/*
	409	* For booting Linux, the board info and command line data
	410	* have to be in the first 8 MB of memory, since this is
	411	* the maximum mapped by the Linux kernel during initialization.
	412	*/
6d0f6bcf	413	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
10a36a98	414
10a36a98 WD	415	/*
	416	* Internal Definitions
	417	*
	418	* Boot Flags
	419	*/
	420	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	421	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	422
2835e518	423	#if defined(CONFIG_CMD_KGDB)
37fef499 PG	424	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
37fef499 PG	425	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
10a36a98 WD	426	#endif
10a36a98 WD	427
10a36a98	428	#if defined(CONFIG_TSEC_ENET) \|\| defined(CONFIG_ETHER_ON_FCC)
c158bcac PG	429	#define CONFIG_HAS_ETH0
c158bcac PG	430	#define CONFIG_HAS_ETH1
10a36a98 WD	431	#endif
10a36a98 WD	432
c158bcac PG	433	/* You can compile in a MAC address and your custom net settings by using
	434	* the following syntax. Your board should be marked with the assigned
	435	* MAC addresses directly on it.
	436	*
	437	* #define CONFIG_ETHADDR de:ad:be:ef:00:00
	438	* #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
	439	* #define CONFIG_SERVERIP <server ip>
	440	* #define CONFIG_IPADDR <board ip>
	441	* #define CONFIG_GATEWAYIP <gateway ip>
	442	* #define CONFIG_NETMASK <your netmask>
	443	*/
	444
10a36a98 WD	445	#define CONFIG_HOSTNAME SBC8560
10a36a98 WD	446	#define CONFIG_ROOTPATH /home/ppc
37fef499 PG	447	#define CONFIG_BOOTFILE uImage
	448
	449	#define CONFIG_EXTRA_ENV_SETTINGS \
	450	"netdev=eth0\0" \
	451	"consoledev=ttyS0\0" \
	452	"ramdiskaddr=2000000\0" \
	453	"ramdiskfile=ramdisk.uboot\0" \
	454	"fdtaddr=c00000\0" \
	455	"fdtfile=sbc8560.dtb\0"
	456
	457	#define CONFIG_NFSBOOTCOMMAND \
	458	"setenv bootargs root=/dev/nfs rw " \
	459	"nfsroot=$serverip:$rootpath " \
	460	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	461	"console=$consoledev,$baudrate $othbootargs;" \
	462	"tftp $loadaddr $bootfile;" \
	463	"tftp $fdtaddr $fdtfile;" \
	464	"bootm $loadaddr - $fdtaddr"
	465
	466
	467	#define CONFIG_RAMBOOTCOMMAND \
	468	"setenv bootargs root=/dev/ram rw " \
	469	"console=$consoledev,$baudrate $othbootargs;" \
	470	"tftp $ramdiskaddr $ramdiskfile;" \
	471	"tftp $loadaddr $bootfile;" \
	472	"tftp $fdtaddr $fdtfile;" \
	473	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	474
	475	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
10a36a98 WD	476
10a36a98 WD	477	#endif /* __CONFIG_H */