[people/ms/u-boot.git] / include / configs / sheevaplug.h

/*
 * (C) Copyright 2009-2014
 * Gerald Kerma <dreagle@doukki.net>
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_SHEEVAPLUG_H
#define _CONFIG_SHEEVAPLUG_H

/*
 * Version number information
 */
#define CONFIG_IDENT_STRING	"\nMarvell-Sheevaplug"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6281	1	/* SOC Name */
#define CONFIG_MACH_SHEEVAPLUG	/* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Compression configuration
 */
#define CONFIG_BZIP2
#define CONFIG_LZMA
#define CONFIG_LZO

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_IDE
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
#endif
/*
 * max 4k env size is enough, but in case of nand
 * it has to be rounded to sector size
 */
#define CONFIG_ENV_SIZE			0x20000	/* 128k */
#define CONFIG_ENV_ADDR			0x80000
#define CONFIG_ENV_OFFSET		0x80000	/* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
	"${x_bootcmd_usb}; bootm 0x6400000;"

#define CONFIG_MTDPARTS		"orion_nand:512k(uboot),"	\
	"3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"

#define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"	\
	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS	\
	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
	"x_bootcmd_usb=usb start\0" \
	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"

#define MTDIDS_DEFAULT	"nand0=orion_nand"

#define MTDPARTS_DEFAULT	\
	"mtdparts="CONFIG_MTDPARTS

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 * SDIO/MMC Card Configuration
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_MVEBU_MMC
#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
#endif /* CONFIG_CMD_MMC */

/*
 * SATA driver configuration
 */
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_DOS_PARTITION
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
#endif /* CONFIG_CMD_IDE */

/*
 * File system
 */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO

#endif /* _CONFIG_SHEEVAPLUG_H */
Commit	Line	Data
55dd4ba5	1	/*
0f88a5a9 D	2	* (C) Copyright 2009-2014
0f88a5a9 D	3	* Gerald Kerma <dreagle@doukki.net>
55dd4ba5 PW	4	* Marvell Semiconductor <www.marvell.com>
	5	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
55dd4ba5 PW	8	*/
	9
	10	#ifndef _CONFIG_SHEEVAPLUG_H
	11	#define _CONFIG_SHEEVAPLUG_H
	12
	13	/*
	14	* Version number information
	15	*/
	16	#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
	17
	18	/*
	19	* High Level Configuration Options (easy to change)
	20	*/
55dd4ba5	21	#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
55dd4ba5 PW	22	#define CONFIG_KW88F6281 1 /* SOC Name */
55dd4ba5 PW	23	#define CONFIG_MACH_SHEEVAPLUG /* Machine type */
55dd4ba5	24	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
5414fec8	25
0f88a5a9 D	26	/*
	27	* Compression configuration
	28	*/
	29	#define CONFIG_BZIP2
	30	#define CONFIG_LZMA
	31	#define CONFIG_LZO
	32
55dd4ba5 PW	33	/*
	34	* Commands configuration
	35	*/
	36	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	37	#include <config_cmd_default.h>
0f88a5a9	38	#define CONFIG_CMD_BOOTZ
55dd4ba5 PW	39	#define CONFIG_CMD_DHCP
55dd4ba5 PW	40	#define CONFIG_CMD_ENV
0f88a5a9	41	#define CONFIG_CMD_IDE
5414fec8	42	#define CONFIG_CMD_MII
3fe3b4fb	43	#define CONFIG_CMD_MMC
55dd4ba5 PW	44	#define CONFIG_CMD_NAND
	45	#define CONFIG_CMD_PING
	46	#define CONFIG_CMD_USB
55dd4ba5	47	/*
54e999a3 PW	48	* mv-common.h should be defined after CMD configs since it used them
54e999a3 PW	49	* to enable certain macros
55dd4ba5	50	*/
54e999a3	51	#include "mv-common.h"
55dd4ba5 PW	52
	53	/*
	54	* Environment variables configurations
	55	*/
	56	#ifdef CONFIG_CMD_NAND
	57	#define CONFIG_ENV_IS_IN_NAND 1
	58	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
	59	#else
	60	#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
	61	#endif
	62	/*
	63	* max 4k env size is enough, but in case of nand
	64	* it has to be rounded to sector size
	65	*/
	66	#define CONFIG_ENV_SIZE 0x20000 /* 128k */
4dfb0e4d D	67	#define CONFIG_ENV_ADDR 0x80000
4dfb0e4d D	68	#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
55dd4ba5 PW	69
	70	/*
	71	* Default environment variables
	72	*/
	73	#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
	74	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
	75	"${x_bootcmd_usb}; bootm 0x6400000;"
	76
	77	#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \
	78	"3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
	79
	80	#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
	81	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
	82	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
	83	"x_bootcmd_usb=usb start\0" \
	84	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
	85
65ae9523 D	86	#define MTDIDS_DEFAULT "nand0=orion_nand"
	87
	88	#define MTDPARTS_DEFAULT \
	89	"mtdparts="CONFIG_MTDPARTS
	90
55dd4ba5 PW	91	/*
	92	* Ethernet Driver configuration
	93	*/
	94	#ifdef CONFIG_CMD_NET
d44265ad	95	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
55dd4ba5	96	#define CONFIG_PHY_BASE_ADR 0
55dd4ba5 PW	97	#endif /* CONFIG_CMD_NET */
55dd4ba5 PW	98
3fe3b4fb D	99	/*
	100	* SDIO/MMC Card Configuration
	101	*/
	102	#ifdef CONFIG_CMD_MMC
	103	#define CONFIG_MMC
	104	#define CONFIG_GENERIC_MMC
	105	#define CONFIG_MVEBU_MMC
	106	#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
	107	#endif /* CONFIG_CMD_MMC */
	108
0f88a5a9 D	109	/*
	110	* SATA driver configuration
	111	*/
	112	#ifdef CONFIG_CMD_IDE
	113	#define __io
	114	#define CONFIG_IDE_PREINIT
	115	#define CONFIG_DOS_PARTITION
	116	#define CONFIG_MVSATA_IDE_USE_PORT0
	117	#define CONFIG_MVSATA_IDE_USE_PORT1
	118	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	119	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	120	#endif /* CONFIG_CMD_IDE */
	121
5414fec8 FM	122	/*
	123	* File system
	124	*/
	125	#define CONFIG_CMD_EXT2
0f88a5a9	126	#define CONFIG_CMD_EXT4
5414fec8 FM	127	#define CONFIG_CMD_FAT
	128	#define CONFIG_CMD_JFFS2
	129	#define CONFIG_CMD_UBI
	130	#define CONFIG_CMD_UBIFS
	131	#define CONFIG_RBTREE
	132	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	133	#define CONFIG_MTD_PARTITIONS
	134	#define CONFIG_CMD_MTDPARTS
	135	#define CONFIG_LZO
	136
55dd4ba5	137	#endif /* _CONFIG_SHEEVAPLUG_H */