[people/ms/u-boot.git] / include / configs / siemens-am33x-common.h

/*
 * siemens am33x common board options
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
#define __CONFIG_SIEMENS_AM33X_COMMON_H

#define CONFIG_AM33XX

#include <asm/arch/omap.h>

#define CONFIG_DMA_COHERENT
#define CONFIG_DMA_COHERENT_SIZE	(1 << 20)

#define CONFIG_ENV_SIZE			(0x2000)
#define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#ifdef CONFIG_SIEMENS_MACH_TYPE
#define CONFIG_MACH_TYPE		CONFIG_SIEMENS_MACH_TYPE
#endif

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/* commands to include */

#define CONFIG_ENV_VARS_UBOOT_CONFIG
#ifndef CONFIG_SPL_BUILD
#define CONFIG_ROOTPATH		"/opt/eldk"
#endif

#define CONFIG_ENV_OVERWRITE		1
#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_AUTOLOAD	"yes"

/* Clock Defines */
#define V_OSCK				24000000  /* Clock output from T2 */
#define V_SCLK				(V_OSCK)

/* We set the max number of command args high to avoid HUSH bugs. */
#define CONFIG_SYS_MAXARGS		32

/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		1024

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					+ sizeof(CONFIG_SYS_PROMPT) + 16)

/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*
 * memtest works on 8 MB in DRAM after skipping 32MB from
 * start addr of ram disk
 */
#define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
					+ (8 * 1024 * 1024))

#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */

#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
#define CONFIG_MTD_DEVICE
#define CONFIG_SF_DEFAULT_SPEED		(75000000)

 /* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
#define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */

#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
						GENERATED_GBL_DATA_SIZE)
 /* Platform/Board specific defs */
#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/* NS16550 Configuration */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#endif
#define CONFIG_SYS_NS16550_CLK		(48000000)
#define CONFIG_SYS_NS16550_COM1		0x44e09000
#define CONFIG_SYS_NS16550_COM4		0x481a6000

#define CONFIG_SERIAL1                  1
#define CONFIG_CONS_INDEX               1

/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
#define CONFIG_SYS_I2C_OMAP24XX

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x402F0400
#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
					 CONFIG_SPL_TEXT_BASE)

#define CONFIG_SPL_BSS_START_ADDR	0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */

#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000

#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"

#define CONFIG_SPL_NAND_AM33XX_BCH
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
					 CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
					 10, 11, 12, 13, 14, 15, 16, 17, \
					 18, 19, 20, 21, 22, 23, 24, 25, \
					 26, 27, 28, 29, 30, 31, 32, 33, \
					 34, 35, 36, 37, 38, 39, 40, 41, \
					 42, 43, 44, 45, 46, 47, 48, 49, \
					 50, 51, 52, 53, 54, 55, 56, 57, }

#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	14
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW

#define CONFIG_SYS_NAND_ECCSTEPS	4
#define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
						CONFIG_SYS_NAND_ECCSTEPS)

#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000

/*
 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 * 64 bytes before this address should be set aside for u-boot.img's
 * header. That is 0x800FFFC0--0x80100000 should not be used for any
 * other needs.
 */
#define CONFIG_SYS_TEXT_BASE		0x80100000
#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

/*
 * Since SPL did pll and ddr initialization for us,
 * we don't need to do it twice.
 */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif

#ifndef CONFIG_SPL_BUILD
/*
 * USB configuration
 */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#undef CONFIG_USB_GADGET_DUALSPEED

#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST

#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
#endif /* CONFIG_USB_MUSB_GADGET */

/* USB DRACO ID as default */
#define CONFIG_USBD_HS

/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
#define DFU_MANIFEST_POLL_TIMEOUT	25000

#endif /* CONFIG_SPL_BUILD */

/*
 * Default to using SPI for environment, etc.  We have multiple copies
 * of SPL as the ROM will check these locations.
 * 0x0 - 0x20000 : First copy of SPL
 * 0x20000 - 0x40000 : Second copy of SPL
 * 0x40000 - 0x60000 : Third copy of SPL
 * 0x60000 - 0x80000 : Fourth copy of SPL
 * 0x80000 - 0xDF000 : U-Boot
 * 0xDF000 - 0xE0000 : U-Boot Environment
 * 0xE0000 - 0x442000 : Linux Kernel
 * 0x442000 - 0x800000 : Userland
 */
#if defined(CONFIG_SPI_BOOT)
# undef CONFIG_ENV_IS_NOWHERE
# define CONFIG_ENV_IS_IN_SPI_FLASH
# define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
# define CONFIG_ENV_OFFSET		(892 << 10) /* 892 KiB in */
# define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
#endif /* SPI support */

#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT         10

#define CONFIG_NAND
/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND

/* UBI Support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS
#endif

/* Commen environment */
#define CONFIG_PREBOOT
#define COMMON_ENV_DFU_ARGS	"dfu_args=run bootargs_defaults;" \
				"setenv bootargs ${bootargs};" \
				"mtdparts default;" \
				"draco_led 1;" \
				"dfu 0 nand 0;" \
				"draco_led 0;\0" \

#define COMMON_ENV_NAND_BOOT \
		"nand_boot=echo Booting from nand; " \
		"if test ${upgrade_available} -eq 1; then " \
			"if test ${bootcount} -gt ${bootlimit}; " \
				"then " \
				"setenv upgrade_available 0;" \
				"setenv ${partitionset_active} true;" \
				"if test -n ${A}; then " \
					"setenv partitionset_active B; " \
					"env delete A; " \
				"fi;" \
				"if test -n ${B}; then " \
					"setenv partitionset_active A; " \
					"env delete B; " \
				"fi;" \
				"saveenv; " \
			"fi;" \
		"fi;" \
		"echo set ${partitionset_active}...;" \
		"run nand_args; "

#define COMMON_ENV_NAND_CMDS	"flash_self=run nand_boot\0" \
				"flash_self_test=setenv testargs test; " \
					"run nand_boot\0" \
				"dfu_start=echo Preparing for dfu mode ...; " \
				"run dfu_args; \0"

#define COMMON_ENV_SETTINGS \
	"verify=no \0" \
	"project_dir=targetdir\0" \
	"upgrade_available=0\0" \
	"altbootcmd=run bootcmd\0" \
	"bootlimit=3\0" \
	"partitionset_active=A\0" \
	"loadaddr=0x82000000\0" \
	"kloadaddr=0x81000000\0" \
	"script_addr=0x81900000\0" \
	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
	"nfsopts=nolock rw\0" \
	"ip_method=none\0" \
	"bootenv=uEnv.txt\0" \
	"bootargs_defaults=setenv bootargs " \
		"console=${console} " \
		"${testargs} " \
		"${optargs}\0" \
	"siemens_help=echo; "\
		"echo Type 'run flash_self' to use kernel and root " \
		"filesystem on memory; echo Type 'run flash_self_test' to " \
		"use kernel and root filesystem on memory, boot in test " \
		"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
		"from memory and root filesystem over NFS; echo Type " \
		"'run net_nfs' to get Kernel over TFTP and mount root " \
		"filesystem over NFS; " \
		"echo Set partitionset_active variable to 'A' " \
		"or 'B' to select kernel and rootfs partition; " \
		"echo" \
		"\0"

/*
 * Variant 1 partition layout
 * chip-size = 256MiB
 *|         name |        size |           address area |
 *-------------------------------------------------------
 *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 *-------------------------------------------------------
 */
#define MTDIDS_NAME_STR		"omap2-nand.0"
#define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
#define MTDPARTS_DEFAULT_V1	"mtdparts=" MTDIDS_NAME_STR ":" \
					"128k(spl),"		\
					"128k(spl.backup1),"	\
					"128k(spl.backup2),"	\
					"128k(spl.backup3),"	\
					"1920k(u-boot),"	\
					"128k(uboot.env),"	\
					"5120k(kernel_a),"	\
					"5120k(kernel_b),"	\
					"8192k(mtdoops),"	\
					"-(rootfs)"

#define DFU_ALT_INFO_NAND_V1 \
	"spl part 0 1;" \
	"spl.backup1 part 0 2;" \
	"spl.backup2 part 0 3;" \
	"spl.backup3 part 0 4;" \
	"u-boot part 0 5;" \
	"u-boot.env part 0 6;" \
	"kernel_a part 0 7;" \
	"kernel_b part 0 8;" \
	"rootfs partubi 0 10"

#define CONFIG_ENV_SETTINGS_NAND_V1 \
	"nand_active_ubi_vol=rootfs_a\0" \
	"nand_active_ubi_vol_A=rootfs_a\0" \
	"nand_active_ubi_vol_B=rootfs_b\0" \
	"nand_root_fs_type=ubifs rootwait=1\0" \
	"nand_src_addr=0x280000\0" \
	"nand_src_addr_A=0x280000\0" \
	"nand_src_addr_B=0x780000\0" \
	"nand_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv ${partitionset_active} true;" \
		"if test -n ${A}; then " \
			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
			"setenv nand_src_addr ${nand_src_addr_A};" \
		"fi;" \
		"if test -n ${B}; then " \
			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
			"setenv nand_src_addr ${nand_src_addr_B};" \
		"fi;" \
		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
		"ubi.mtd=9,${ubi_off};" \
		"setenv bootargs ${bootargs} " \
		"root=${nand_root} noinitrd ${mtdparts} " \
		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
		"=mtdoops\0" \
	COMMON_ENV_DFU_ARGS \
		"dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
	COMMON_ENV_NAND_BOOT \
		"nand read.i ${kloadaddr} ${nand_src_addr} " \
		"${nand_img_size}; bootm ${kloadaddr}\0" \
	COMMON_ENV_NAND_CMDS

#define CONFIG_ENV_SETTINGS_V1 \
		COMMON_ENV_SETTINGS \
	"net_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootfile ${project_dir}/kernel/uImage;" \
		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
		"setenv bootargs ${bootargs} " \
		"root=/dev/nfs ${mtdparts} " \
		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
		"ip=${ipaddr}:${serverip}:" \
		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
	"net_nfs=echo Booting from network ...; " \
		"run net_args; " \
		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
		"bootm ${kloadaddr}\0"

/*
 * Variant 2 partition layout
 * chip-size = 256MiB or 512 MiB
 *|         name |        size |           address area |
 *-------------------------------------------------------
 *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 *-------------------------------------------------------
 */

#define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
					"128k(spl)," \
					"128k(spl.backup1)," \
					"128k(spl.backup2)," \
					"128k(spl.backup3)," \
					"1920k(u-boot)," \
					"512k(u-boot.env0)," \
					"512k(u-boot.env1)," \
					"512k(mtdoops)," \
					"-(rootfs)"

#define DFU_ALT_INFO_NAND_V2 \
	"spl part 0 1;" \
	"spl.backup1 part 0 2;" \
	"spl.backup2 part 0 3;" \
	"spl.backup3 part 0 4;" \
	"u-boot part 0 5;" \
	"u-boot.env0 part 0 6;" \
	"u-boot.env1 part 0 7;" \
	"rootfs partubi 0 9" \

#define CONFIG_ENV_SETTINGS_NAND_V2 \
	"nand_active_ubi_vol=rootfs_a\0" \
	"rootfs_name=rootfs\0" \
	"kernel_name=uImage\0"\
	"nand_root_fs_type=ubifs rootwait=1\0" \
	"nand_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv ${partitionset_active} true;" \
		"if test -n ${A}; then " \
			"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
		"fi;" \
		"if test -n ${B}; then " \
			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
		"fi;" \
		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
		"ubi.mtd=rootfs,2048;" \
		"setenv bootargs ${bootargs} " \
		"root=${nand_root} noinitrd ${mtdparts} " \
		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
		"=mtdoops\0" \
	COMMON_ENV_DFU_ARGS \
		"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
	COMMON_ENV_NAND_BOOT \
		"ubi part rootfs ${ubi_off};" \
		"ubifsmount ubi0:${nand_active_ubi_vol};" \
		"ubifsload ${kloadaddr} boot/${kernel_name};" \
		"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
		"bootm ${kloadaddr} - ${loadaddr}\0" \
	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
		"bootm ${kloadaddr} - ${loadaddr}\0" \
	COMMON_ENV_NAND_CMDS

#define CONFIG_ENV_SETTINGS_V2 \
		COMMON_ENV_SETTINGS \
	"net_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootfile ${project_dir}/kernel/uImage;" \
		"setenv bootdtb ${project_dir}/kernel/dtb;" \
		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
		"setenv bootargs ${bootargs} " \
		"root=/dev/nfs ${mtdparts} " \
		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
		"ip=${ipaddr}:${serverip}:" \
		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
	"net_nfs=echo Booting from network ...; " \
		"run net_args; " \
		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
		"tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
		"bootm ${kloadaddr} - ${loadaddr}\0"

/*
 * Variant 3 partition layout
 * chip-size = 512MiB
 *|         name |        size |           address area |
 *-------------------------------------------------------
 *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 *-------------------------------------------------------
 */

#define MTDPARTS_DEFAULT_V3	"mtdparts=" MTDIDS_NAME_STR ":" \
					"128k(spl),"		\
					"128k(spl.backup1),"	\
					"128k(spl.backup2),"	\
					"128k(spl.backup3),"	\
					"1920k(u-boot),"	\
					"512k(u-boot.env0),"	\
					"512k(u-boot.env1),"	\
					"300m(rootfs),"		\
					"512k(mtdoops),"	\
					"-(configuration)"

#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_BASE		(0x08000000)	/* physical address */
							/* to access nand at */
							/* CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
							   devices */
#if !defined(CONFIG_SPI_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
#endif
#endif

/* Reboot after 60 sec if bootcmd fails */
#define CONFIG_RESET_TO_RETRY
#define CONFIG_BOOT_RETRY_TIME 60

#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_ENV

#endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
Commit	Line	Data
c0dcece7 HS	1	/*
	2	* siemens am33x common board options
	3	* (C) Copyright 2013 Siemens Schweiz AG
	4	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* U-Boot file:/include/configs/am335x_evm.h
	8	*
	9	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
	15	#define __CONFIG_SIEMENS_AM33X_COMMON_H
	16
	17	#define CONFIG_AM33XX
c0dcece7 HS	18
	19	#include <asm/arch/omap.h>
	20
	21	#define CONFIG_DMA_COHERENT
	22	#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
	23
	24	#define CONFIG_ENV_SIZE (0x2000)
	25	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	26	#define CONFIG_SYS_LONGHELP /* undef to save memory */
578056c3	27	#ifdef CONFIG_SIEMENS_MACH_TYPE
c0dcece7	28	#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
578056c3	29	#endif
c0dcece7 HS	30
	31	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	32	#define CONFIG_SETUP_MEMORY_TAGS
	33	#define CONFIG_INITRD_TAG
	34
c0dcece7	35	/* commands to include */
c0dcece7 HS	36
	37	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	38	#ifndef CONFIG_SPL_BUILD
	39	#define CONFIG_ROOTPATH "/opt/eldk"
	40	#endif
	41
	42	#define CONFIG_ENV_OVERWRITE 1
	43	#define CONFIG_ENV_IS_NOWHERE
	44
	45	#define CONFIG_SYS_LONGHELP
	46	#define CONFIG_CMDLINE_EDITING
	47	#define CONFIG_AUTO_COMPLETE
	48	#define CONFIG_SYS_AUTOLOAD "yes"
	49
	50	/* Clock Defines */
	51	#define V_OSCK 24000000 /* Clock output from T2 */
	52	#define V_SCLK (V_OSCK)
	53
	54	/* We set the max number of command args high to avoid HUSH bugs. */
	55	#define CONFIG_SYS_MAXARGS 32
	56
	57	/* Console I/O Buffer Size */
61159b76	58	#define CONFIG_SYS_CBSIZE 1024
c0dcece7 HS	59
	60	/* Print Buffer Size */
	61	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	62	+ sizeof(CONFIG_SYS_PROMPT) + 16)
	63
	64	/* Boot Argument Buffer Size */
	65	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	66
	67	/*
	68	* memtest works on 8 MB in DRAM after skipping 32MB from
	69	* start addr of ram disk
	70	*/
	71	#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
	72	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
	73	+ (8 * 1024 * 1024))
	74
	75	#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
c0dcece7	76
c0dcece7 HS	77	#define CONFIG_SPI
	78	#define CONFIG_OMAP3_SPI
	79	#define CONFIG_MTD_DEVICE
c0dcece7 HS	80	#define CONFIG_SF_DEFAULT_SPEED (75000000)
	81
	82	/* Physical Memory Map */
	83	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
	84	#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
	85
	86	#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
	87	#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
	88	GENERATED_GBL_DATA_SIZE)
	89	/* Platform/Board specific defs */
	90	#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
	91	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
c0dcece7 HS	92
c0dcece7 HS	93	/* NS16550 Configuration */
71423435	94	#ifdef CONFIG_SPL_BUILD
c0dcece7	95	#define CONFIG_SYS_NS16550_SERIAL
c0dcece7	96	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
71423435	97	#endif
c0dcece7 HS	98	#define CONFIG_SYS_NS16550_CLK (48000000)
	99	#define CONFIG_SYS_NS16550_COM1 0x44e09000
	100	#define CONFIG_SYS_NS16550_COM4 0x481a6000
	101
c0dcece7 HS	102	#define CONFIG_SERIAL1 1
	103	#define CONFIG_CONS_INDEX 1
	104
	105	/* I2C Configuration */
	106	#define CONFIG_I2C
6789e84e	107	#define CONFIG_SYS_I2C
2cb81b6b	108	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
6789e84e HS	109	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
6789e84e HS	110	#define CONFIG_SYS_I2C_OMAP24XX
c0dcece7 HS	111
c0dcece7 HS	112	/* Defines for SPL */
c0dcece7 HS	113	#define CONFIG_SPL_FRAMEWORK
c0dcece7 HS	114	#define CONFIG_SPL_TEXT_BASE 0x402F0400
fa2f81b0 TR	115	#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
fa2f81b0 TR	116	CONFIG_SPL_TEXT_BASE)
c0dcece7 HS	117
	118	#define CONFIG_SPL_BSS_START_ADDR 0x80000000
	119	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
	120
e2ccdf89	121	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
205b4f33	122	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
c0dcece7	123
c0dcece7	124	#define CONFIG_SPL_SPI_LOAD
c0dcece7 HS	125	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
c0dcece7 HS	126
3a517fdc	127	#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
c0dcece7	128
c0dcece7	129	#define CONFIG_SPL_NAND_AM33XX_BCH
c0dcece7 HS	130	#define CONFIG_SPL_NAND_BASE
	131	#define CONFIG_SPL_NAND_DRIVERS
	132	#define CONFIG_SPL_NAND_ECC
6b3943f1	133	#define CONFIG_SYS_NAND_ONFI_DETECTION
c0dcece7 HS	134	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	135	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	136	CONFIG_SYS_NAND_PAGE_SIZE)
	137	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	138	#define CONFIG_SYS_NAND_OOBSIZE 64
	139	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	140	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	141	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	142	10, 11, 12, 13, 14, 15, 16, 17, \
	143	18, 19, 20, 21, 22, 23, 24, 25, \
	144	26, 27, 28, 29, 30, 31, 32, 33, \
	145	34, 35, 36, 37, 38, 39, 40, 41, \
	146	42, 43, 44, 45, 46, 47, 48, 49, \
	147	50, 51, 52, 53, 54, 55, 56, 57, }
	148
	149	#define CONFIG_SYS_NAND_ECCSIZE 512
	150	#define CONFIG_SYS_NAND_ECCBYTES 14
3f719069	151	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
c0dcece7 HS	152
	153	#define CONFIG_SYS_NAND_ECCSTEPS 4
	154	#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
	155	CONFIG_SYS_NAND_ECCSTEPS)
	156
	157	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	158
	159	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	160
	161	/*
	162	* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
	163	* 64 bytes before this address should be set aside for u-boot.img's
	164	* header. That is 0x800FFFC0--0x80100000 should not be used for any
	165	* other needs.
	166	*/
	167	#define CONFIG_SYS_TEXT_BASE 0x80100000
	168	#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
	169	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	170
	171	/*
	172	* Since SPL did pll and ddr initialization for us,
	173	* we don't need to do it twice.
	174	*/
	175	#ifndef CONFIG_SPL_BUILD
	176	#define CONFIG_SKIP_LOWLEVEL_INIT
	177	#endif
	178
	179	#ifndef CONFIG_SPL_BUILD
	180	/*
	181	* USB configuration
	182	*/
	183	#define CONFIG_USB_MUSB_DSPS
95de1e2f PK	184	#define CONFIG_USB_MUSB_PIO_ONLY
95de1e2f PK	185	#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
ece91016	186	#undef CONFIG_USB_GADGET_DUALSPEED
c0dcece7 HS	187
	188	#define CONFIG_AM335X_USB0
	189	#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
	190	#define CONFIG_AM335X_USB1
	191	#define CONFIG_AM335X_USB1_MODE MUSB_HOST
c0dcece7	192
95de1e2f	193	#ifdef CONFIG_USB_MUSB_GADGET
c0dcece7 HS	194	#define CONFIG_USB_ETHER
	195	#define CONFIG_USB_ETH_RNDIS
	196	#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
95de1e2f	197	#endif /* CONFIG_USB_MUSB_GADGET */
c0dcece7	198
56eb3da4	199	/* USB DRACO ID as default */
c0dcece7	200	#define CONFIG_USBD_HS
c0dcece7 HS	201
c0dcece7 HS	202	/* USB Device Firmware Update support */
c0dcece7	203	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
401341d6	204	#define DFU_MANIFEST_POLL_TIMEOUT 25000
c0dcece7 HS	205
	206	#endif /* CONFIG_SPL_BUILD */
	207
	208	/*
	209	* Default to using SPI for environment, etc. We have multiple copies
	210	* of SPL as the ROM will check these locations.
	211	* 0x0 - 0x20000 : First copy of SPL
	212	* 0x20000 - 0x40000 : Second copy of SPL
	213	* 0x40000 - 0x60000 : Third copy of SPL
	214	* 0x60000 - 0x80000 : Fourth copy of SPL
	215	* 0x80000 - 0xDF000 : U-Boot
	216	* 0xDF000 - 0xE0000 : U-Boot Environment
	217	* 0xE0000 - 0x442000 : Linux Kernel
	218	* 0x442000 - 0x800000 : Userland
	219	*/
	220	#if defined(CONFIG_SPI_BOOT)
	221	# undef CONFIG_ENV_IS_NOWHERE
	222	# define CONFIG_ENV_IS_IN_SPI_FLASH
	223	# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	224	# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
	225	# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
	226	#endif /* SPI support */
	227
c0dcece7 HS	228	#define CONFIG_DRIVER_TI_CPSW
	229	#define CONFIG_MII
	230	#define CONFIG_PHY_GIGE
	231	#define CONFIG_PHYLIB
c0dcece7 HS	232	#define CONFIG_BOOTP_DEFAULT
	233	#define CONFIG_BOOTP_DNS
	234	#define CONFIG_BOOTP_DNS2
	235	#define CONFIG_BOOTP_SEND_HOSTNAME
	236	#define CONFIG_BOOTP_GATEWAY
	237	#define CONFIG_BOOTP_SUBNETMASK
	238	#define CONFIG_NET_RETRY_COUNT 10
c0dcece7 HS	239
	240	#define CONFIG_NAND
	241	/* NAND support */
	242	#ifdef CONFIG_NAND
	243	#define CONFIG_CMD_NAND
61159b76 HS	244
	245	/* UBI Support */
	246	#ifndef CONFIG_SPL_BUILD
c0dcece7	247	#define CONFIG_CMD_MTDPARTS
61159b76 HS	248	#define CONFIG_MTD_PARTITIONS
	249	#define CONFIG_MTD_DEVICE
	250	#define CONFIG_RBTREE
	251	#define CONFIG_LZO
61159b76 HS	252	#define CONFIG_CMD_UBIFS
	253	#endif
	254
	255	/* Commen environment */
	256	#define CONFIG_PREBOOT
	257	#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
	258	"setenv bootargs ${bootargs};" \
	259	"mtdparts default;" \
	260	"draco_led 1;" \
	261	"dfu 0 nand 0;" \
	262	"draco_led 0;\0" \
	263
	264	#define COMMON_ENV_NAND_BOOT \
	265	"nand_boot=echo Booting from nand; " \
	266	"if test ${upgrade_available} -eq 1; then " \
	267	"if test ${bootcount} -gt ${bootlimit}; " \
	268	"then " \
	269	"setenv upgrade_available 0;" \
	270	"setenv ${partitionset_active} true;" \
	271	"if test -n ${A}; then " \
	272	"setenv partitionset_active B; " \
	273	"env delete A; " \
	274	"fi;" \
	275	"if test -n ${B}; then " \
	276	"setenv partitionset_active A; " \
	277	"env delete B; " \
	278	"fi;" \
	279	"saveenv; " \
	280	"fi;" \
	281	"fi;" \
	282	"echo set ${partitionset_active}...;" \
	283	"run nand_args; "
	284
	285	#define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \
	286	"flash_self_test=setenv testargs test; " \
	287	"run nand_boot\0" \
	288	"dfu_start=echo Preparing for dfu mode ...; " \
	289	"run dfu_args; \0"
	290
	291	#define COMMON_ENV_SETTINGS \
	292	"verify=no \0" \
	293	"project_dir=targetdir\0" \
	294	"upgrade_available=0\0" \
	295	"altbootcmd=run bootcmd\0" \
	296	"bootlimit=3\0" \
	297	"partitionset_active=A\0" \
	298	"loadaddr=0x82000000\0" \
	299	"kloadaddr=0x81000000\0" \
	300	"script_addr=0x81900000\0" \
	301	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
	302	"nfsopts=nolock rw\0" \
	303	"ip_method=none\0" \
	304	"bootenv=uEnv.txt\0" \
	305	"bootargs_defaults=setenv bootargs " \
	306	"console=${console} " \
	307	"${testargs} " \
	308	"${optargs}\0" \
	309	"siemens_help=echo; "\
	310	"echo Type 'run flash_self' to use kernel and root " \
	311	"filesystem on memory; echo Type 'run flash_self_test' to " \
	312	"use kernel and root filesystem on memory, boot in test " \
	313	"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
	314	"from memory and root filesystem over NFS; echo Type " \
	315	"'run net_nfs' to get Kernel over TFTP and mount root " \
316	"filesystem over NFS; " \
317	"echo Set partitionset_active variable to 'A' " \
318	"or 'B' to select kernel and rootfs partition; " \
319	"echo" \
320	"\0"
c0dcece7	321
c0dcece7	322	/*
61159b76	323	* Variant 1 partition layout
c0dcece7 HS	324	* chip-size = 256MiB
	325	*\| name \| size \| address area \|
	326	*-------------------------------------------------------
	327	*\| spl \| 128.000 KiB \| 0x 0..0x 1ffff \|
	328	*\| spl.backup1 \| 128.000 KiB \| 0x 20000..0x 3ffff \|
	329	*\| spl.backup2 \| 128.000 KiB \| 0x 40000..0x 5ffff \|
	330	*\| spl.backup3 \| 128.000 KiB \| 0x 60000..0x 7ffff \|
	331	*\| u-boot \| 1.875 MiB \| 0x 80000..0x 25ffff \|
	332	*\| uboot.env \| 128.000 KiB \| 0x 260000..0x 27ffff \|
	333	*\| kernel_a \| 5.000 MiB \| 0x 280000..0x 77ffff \|
	334	*\| kernel_b \| 5.000 MiB \| 0x 780000..0x c7ffff \|
	335	*\| mtdoops \| 8.000 MiB \| 0x c80000..0x 147ffff \|
	336	*\| rootfs \| 235.500 MiB \| 0x 1480000..0x fffffff \|
	337	*-------------------------------------------------------
	338	*/
61159b76 HS	339	#define MTDIDS_NAME_STR "omap2-nand.0"
	340	#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
	341	#define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \
	342	"128k(spl)," \
	343	"128k(spl.backup1)," \
	344	"128k(spl.backup2)," \
	345	"128k(spl.backup3)," \
	346	"1920k(u-boot)," \
	347	"128k(uboot.env)," \
	348	"5120k(kernel_a)," \
	349	"5120k(kernel_b)," \
	350	"8192k(mtdoops)," \
	351	"-(rootfs)"
c0dcece7	352
61159b76	353	#define DFU_ALT_INFO_NAND_V1 \
c0dcece7 HS	354	"spl part 0 1;" \
	355	"spl.backup1 part 0 2;" \
	356	"spl.backup2 part 0 3;" \
	357	"spl.backup3 part 0 4;" \
	358	"u-boot part 0 5;" \
	359	"u-boot.env part 0 6;" \
	360	"kernel_a part 0 7;" \
	361	"kernel_b part 0 8;" \
	362	"rootfs partubi 0 10"
	363
61159b76	364	#define CONFIG_ENV_SETTINGS_NAND_V1 \
c0dcece7	365	"nand_active_ubi_vol=rootfs_a\0" \
56eb3da4 SE	366	"nand_active_ubi_vol_A=rootfs_a\0" \
56eb3da4 SE	367	"nand_active_ubi_vol_B=rootfs_b\0" \
c0dcece7 HS	368	"nand_root_fs_type=ubifs rootwait=1\0" \
c0dcece7 HS	369	"nand_src_addr=0x280000\0" \
56eb3da4 SE	370	"nand_src_addr_A=0x280000\0" \
56eb3da4 SE	371	"nand_src_addr_B=0x780000\0" \
c0dcece7 HS	372	"nand_args=run bootargs_defaults;" \
c0dcece7 HS	373	"mtdparts default;" \
56eb3da4 SE	374	"setenv ${partitionset_active} true;" \
	375	"if test -n ${A}; then " \
	376	"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
	377	"setenv nand_src_addr ${nand_src_addr_A};" \
c0dcece7	378	"fi;" \
56eb3da4 SE	379	"if test -n ${B}; then " \
	380	"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
	381	"setenv nand_src_addr ${nand_src_addr_B};" \
c0dcece7 HS	382	"fi;" \
c0dcece7 HS	383	"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
6b3943f1	384	"ubi.mtd=9,${ubi_off};" \
c0dcece7 HS	385	"setenv bootargs ${bootargs} " \
	386	"root=${nand_root} noinitrd ${mtdparts} " \
	387	"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
	388	"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
	389	"=mtdoops\0" \
61159b76 HS	390	COMMON_ENV_DFU_ARGS \
	391	"dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
	392	COMMON_ENV_NAND_BOOT \
	393	"nand read.i ${kloadaddr} ${nand_src_addr} " \
	394	"${nand_img_size}; bootm ${kloadaddr}\0" \
	395	COMMON_ENV_NAND_CMDS
	396
	397	#define CONFIG_ENV_SETTINGS_V1 \
	398	COMMON_ENV_SETTINGS \
c0dcece7 HS	399	"net_args=run bootargs_defaults;" \
	400	"mtdparts default;" \
	401	"setenv bootfile ${project_dir}/kernel/uImage;" \
	402	"setenv rootpath /home/projects/${project_dir}/rootfs;" \
	403	"setenv bootargs ${bootargs} " \
	404	"root=/dev/nfs ${mtdparts} " \
	405	"nfsroot=${serverip}:${rootpath},${nfsopts} " \
56eb3da4	406	"ip=${ipaddr}:${serverip}:" \
c0dcece7	407	"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
61159b76 HS	408	"net_nfs=echo Booting from network ...; " \
	409	"run net_args; " \
	410	"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
	411	"bootm ${kloadaddr}\0"
	412
	413	/*
	414	* Variant 2 partition layout
0dd1c31d	415	* chip-size = 256MiB or 512 MiB
61159b76 HS	416	*\| name \| size \| address area \|
	417	*-------------------------------------------------------
	418	*\| spl \| 128.000 KiB \| 0x 0..0x 1ffff \|
	419	*\| spl.backup1 \| 128.000 KiB \| 0x 20000..0x 3ffff \|
	420	*\| spl.backup2 \| 128.000 KiB \| 0x 40000..0x 5ffff \|
	421	*\| spl.backup3 \| 128.000 KiB \| 0x 60000..0x 7ffff \|
	422	*\| u-boot \| 1.875 MiB \| 0x 80000..0x 25ffff \|
	423	*\| uboot.env0 \| 512.000 KiB \| 0x 260000..0x 2Dffff \|
	424	*\| uboot.env1 \| 512.000 KiB \| 0x 2E0000..0x 35ffff \|
0dd1c31d ES	425	*\| mtdoops \| 512.000 KiB \| 0x 360000..0x 3dffff \|
	426	*\| (256) rootfs \| 252.125 MiB \| 0x 3E0000..0x fffffff \|
	427	*\| (512) rootfs \| 508.125 MiB \| 0x 3E0000..0x1fffffff \|
61159b76 HS	428	*-------------------------------------------------------
	429	*/
	430
	431	#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
0dd1c31d ES	432	"128k(spl)," \
	433	"128k(spl.backup1)," \
	434	"128k(spl.backup2)," \
	435	"128k(spl.backup3)," \
	436	"1920k(u-boot)," \
	437	"512k(u-boot.env0)," \
	438	"512k(u-boot.env1)," \
	439	"512k(mtdoops)," \
	440	"-(rootfs)"
	441
61159b76 HS	442	#define DFU_ALT_INFO_NAND_V2 \
	443	"spl part 0 1;" \
	444	"spl.backup1 part 0 2;" \
	445	"spl.backup2 part 0 3;" \
	446	"spl.backup3 part 0 4;" \
	447	"u-boot part 0 5;" \
	448	"u-boot.env0 part 0 6;" \
	449	"u-boot.env1 part 0 7;" \
0dd1c31d	450	"rootfs partubi 0 9" \
61159b76 HS	451
	452	#define CONFIG_ENV_SETTINGS_NAND_V2 \
	453	"nand_active_ubi_vol=rootfs_a\0" \
	454	"rootfs_name=rootfs\0" \
	455	"kernel_name=uImage\0"\
	456	"nand_root_fs_type=ubifs rootwait=1\0" \
	457	"nand_args=run bootargs_defaults;" \
	458	"mtdparts default;" \
	459	"setenv ${partitionset_active} true;" \
	460	"if test -n ${A}; then " \
	461	"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
56eb3da4	462	"fi;" \
61159b76 HS	463	"if test -n ${B}; then " \
	464	"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
	465	"fi;" \
	466	"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
0dd1c31d	467	"ubi.mtd=rootfs,2048;" \
61159b76 HS	468	"setenv bootargs ${bootargs} " \
	469	"root=${nand_root} noinitrd ${mtdparts} " \
	470	"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
	471	"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
	472	"=mtdoops\0" \
	473	COMMON_ENV_DFU_ARGS \
	474	"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
	475	COMMON_ENV_NAND_BOOT \
6b3943f1	476	"ubi part rootfs ${ubi_off};" \
61159b76 HS	477	"ubifsmount ubi0:${nand_active_ubi_vol};" \
	478	"ubifsload ${kloadaddr} boot/${kernel_name};" \
	479	"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
	480	"bootm ${kloadaddr} - ${loadaddr}\0" \
	481	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
	482	"bootm ${kloadaddr} - ${loadaddr}\0" \
	483	COMMON_ENV_NAND_CMDS
	484
	485	#define CONFIG_ENV_SETTINGS_V2 \
	486	COMMON_ENV_SETTINGS \
	487	"net_args=run bootargs_defaults;" \
	488	"mtdparts default;" \
	489	"setenv bootfile ${project_dir}/kernel/uImage;" \
	490	"setenv bootdtb ${project_dir}/kernel/dtb;" \
	491	"setenv rootpath /home/projects/${project_dir}/rootfs;" \
	492	"setenv bootargs ${bootargs} " \
	493	"root=/dev/nfs ${mtdparts} " \
	494	"nfsroot=${serverip}:${rootpath},${nfsopts} " \
	495	"ip=${ipaddr}:${serverip}:" \
	496	"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
c0dcece7 HS	497	"net_nfs=echo Booting from network ...; " \
	498	"run net_args; " \
	499	"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
61159b76 HS	500	"tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
	501	"bootm ${kloadaddr} - ${loadaddr}\0"
	502
578056c3 HS	503	/*
	504	* Variant 3 partition layout
	505	* chip-size = 512MiB
	506	*\| name \| size \| address area \|
	507	*-------------------------------------------------------
	508	*\| spl \| 128.000 KiB \| 0x 0..0x 1ffff \|
	509	*\| spl.backup1 \| 128.000 KiB \| 0x 20000..0x 3ffff \|
	510	*\| spl.backup2 \| 128.000 KiB \| 0x 40000..0x 5ffff \|
	511	*\| spl.backup3 \| 128.000 KiB \| 0x 60000..0x 7ffff \|
	512	*\| u-boot \| 1.875 MiB \| 0x 80000..0x 25ffff \|
	513	*\| uboot.env0 \| 512.000 KiB \| 0x 260000..0x 2Dffff \|
	514	*\| uboot.env1 \| 512.000 KiB \| 0x 2E0000..0x 35ffff \|
	515	*\| rootfs \| 300.000 MiB \| 0x 360000..0x12f5ffff \|
	516	*\| mtdoops \| 512.000 KiB \| 0x12f60000..0x12fdffff \|
	517	*\|configuration \| 104.125 MiB \| 0x12fe0000..0x1fffffff \|
	518	*-------------------------------------------------------
	519	*/
	520
	521	#define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \
	522	"128k(spl)," \
	523	"128k(spl.backup1)," \
	524	"128k(spl.backup2)," \
	525	"128k(spl.backup3)," \
	526	"1920k(u-boot)," \
	527	"512k(u-boot.env0)," \
	528	"512k(u-boot.env1)," \
	529	"300m(rootfs)," \
	530	"512k(mtdoops)," \
	531	"-(configuration)"
	532
c0dcece7	533	#define CONFIG_NAND_OMAP_GPMC
beba5f04	534	#define CONFIG_NAND_OMAP_ELM
c0dcece7 HS	535	#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
	536	/* to access nand at */
	537	/* CS0 */
	538	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
	539	devices */
	540	#if !defined(CONFIG_SPI_BOOT)
	541	#undef CONFIG_ENV_IS_NOWHERE
	542	#define CONFIG_ENV_IS_IN_NAND
	543	#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
	544	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
	545	#endif
	546	#endif
	547
56eb3da4 SE	548	/* Reboot after 60 sec if bootcmd fails */
	549	#define CONFIG_RESET_TO_RETRY
	550	#define CONFIG_BOOT_RETRY_TIME 60
	551
	552	#define CONFIG_BOOTCOUNT_LIMIT
	553	#define CONFIG_BOOTCOUNT_ENV
9167fc81	554
c0dcece7	555	#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */