[people/ms/u-boot.git] / include / configs / socfpga_sr1500.h

/*
 * Copyright (C) 2015 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIG_SOCFPGA_SR1500_H__
#define __CONFIG_SOCFPGA_SR1500_H__

#include <asm/arch/base_addr_ac5.h>

#define CONFIG_HW_WATCHDOG

/* Memory configurations */
#define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SR1500 */

/* Booting Linux */
#define CONFIG_LOADADDR		0x01000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Ethernet on SoC (EMAC) */
#define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
/* The PHY is autodetected, so no MII PHY address is needed here */
#define CONFIG_PHY_MARVELL
#define PHY_ANEG_TIMEOUT	8000

/* Environment */

/* Enable SPI NOR flash reset, needed for SPI booting */
#define CONFIG_SPI_N25Q256A_RESET

/*
 * Bootcounter
 */
#define CONFIG_BOOTCOUNT_LIMIT
/* last 2 lwords in OCRAM */
#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfffffff8
#define CONFIG_SYS_BOOTCOUNT_BE

/* Environment setting for SPI flash */
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
#define CONFIG_ENV_SIZE		(16 * 1024)
#define CONFIG_ENV_OFFSET	0x000e0000
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SPI_BUS	0
#define CONFIG_ENV_SPI_CS	0
#define CONFIG_ENV_SPI_MODE	SPI_MODE_3
#define CONFIG_ENV_SPI_MAX_HZ	100000000	/* Use max of 100MHz */
#define CONFIG_SF_DEFAULT_SPEED	100000000

/*
 * The QSPI NOR flash layout on SR1500:
 *
 * 0000.0000 - 0003.ffff: SPL (4 times)
 * 0004.0000 - 000d.ffff: U-Boot
 * 000e.0000 - 000e.ffff: env1
 * 000f.0000 - 000f.ffff: env2
 */

/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>

#endif	/* __CONFIG_SOCFPGA_SR1500_H__ */
Commit	Line	Data
ae9996c8 SR	1	/*
	2	* Copyright (C) 2015 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6	#ifndef __CONFIG_SOCFPGA_SR1500_H__
	7	#define __CONFIG_SOCFPGA_SR1500_H__
	8
	9	#include <asm/arch/base_addr_ac5.h>
	10
ae9996c8 SR	11	#define CONFIG_HW_WATCHDOG
ae9996c8 SR	12
ae9996c8 SR	13	/* Memory configurations */
	14	#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */
	15
	16	/* Booting Linux */
ae9996c8 SR	17	#define CONFIG_LOADADDR 0x01000000
ae9996c8 SR	18	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
ae9996c8 SR	19
	20	/* Ethernet on SoC (EMAC) */
	21	#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
	22	/* The PHY is autodetected, so no MII PHY address is needed here */
	23	#define CONFIG_PHY_MARVELL
	24	#define PHY_ANEG_TIMEOUT 8000
	25
ae9996c8	26	/* Environment */
ae9996c8 SR	27
	28	/* Enable SPI NOR flash reset, needed for SPI booting */
	29	#define CONFIG_SPI_N25Q256A_RESET
	30
	31	/*
	32	* Bootcounter
	33	*/
	34	#define CONFIG_BOOTCOUNT_LIMIT
	35	/* last 2 lwords in OCRAM */
	36	#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8
	37	#define CONFIG_SYS_BOOTCOUNT_BE
	38
ae9996c8	39	/* Environment setting for SPI flash */
ae9996c8 SR	40	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	41	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	42	#define CONFIG_ENV_SIZE (16 * 1024)
93d9fc26	43	#define CONFIG_ENV_OFFSET 0x000e0000
ae9996c8 SR	44	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
	45	#define CONFIG_ENV_SPI_BUS 0
	46	#define CONFIG_ENV_SPI_CS 0
	47	#define CONFIG_ENV_SPI_MODE SPI_MODE_3
93d9fc26 SR	48	#define CONFIG_ENV_SPI_MAX_HZ 100000000 /* Use max of 100MHz */
	49	#define CONFIG_SF_DEFAULT_SPEED 100000000
	50
	51	/*
	52	* The QSPI NOR flash layout on SR1500:
	53	*
	54	* 0000.0000 - 0003.ffff: SPL (4 times)
	55	* 0004.0000 - 000d.ffff: U-Boot
	56	* 000e.0000 - 000e.ffff: env1
	57	* 000f.0000 - 000f.ffff: env2
	58	*/
ae9996c8	59
b72041cc MV	60	/* The rest of the configuration is shared */
	61	#include <configs/socfpga_common.h>
	62
ae9996c8	63	#endif /* __CONFIG_SOCFPGA_SR1500_H__ */