[people/ms/u-boot.git] / include / configs / svm_sc8xx.h

/*
 * (C) Copyright 2000, 2001, 2002
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific,
 *                  for SinoVee Microsystems SC8xx series SBC
 *                  http://www.fel.com.cn (Chinese)
 *                  http://www.sinovee.com (English)
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define	CONFIG_SYS_TEXT_BASE	0x40000000

/* Custom configuration */
/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
/* SC85T,SC860T, FEL8xx-AT(855T/860T) */
/*#define CONFIG_FEL8xx_AT */
/*#define CONFIG_LCD */
/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
/* #define CONFIG_50MHz */
/* #define CONFIG_66MHz */
/* #define CONFIG_75MHz */
#define CONFIG_80MHz
/*#define CONFIG_100MHz */
/* #define CONFIG_BUS_DIV2	1 */
/* for BOOT device port size */
/* #define CONFIG_BOOT_8B */
#define CONFIG_BOOT_16B
/* #define CONFIG_BOOT_32B */
/* #define CONFIG_CAN_DRIVER */
/* #define DEBUG */
#define CONFIG_FEC_ENET

/* #define CONFIG_SDRAM_16M */
#define CONFIG_SDRAM_32M
/* #define CONFIG_SDRAM_64M */
#define CONFIG_SYS_RESET_ADDRESS 0xffffffff
/*
 * High Level Configuration Options
 * (easy to change)
 */

/* #define CONFIG_MPC823		1 */
/* #define CONFIG_MPC850		1 */
#define CONFIG_MPC855		1
/* #define CONFIG_MPC860		1 */
/* #define CONFIG_MPC860T		1 */

#undef	CONFIG_WATCHDOG			/* watchdog */

#define CONFIG_SVM_SC8xx		1	/* ...on SVM SC8xx series	*/

#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display	*/
#endif

#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
#undef	CONFIG_8xx_CONS_SMC2
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		19200	/* console baudrate = 115kbps	*/
#if 0
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds	*/
#endif

#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */

#define CONFIG_BOARD_TYPES      1       /* support board types          */

#define CONFIG_PREBOOT	"echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo"

#undef	CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS                                       \
	"nfsargs=setenv bootargs root=/dev/nfs rw "                     \
	 "nfsroot=${serverip}:${rootpath}\0"                     \
	"ramargs=setenv bootargs root=/dev/ram rw\0"                    \
	"addip=setenv bootargs ${bootargs} "                            \
	       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
		":${hostname}:${netdev}:off panic=1\0"                  \
		"flash_nfs=run nfsargs addip;"                                  \
	     "bootm ${kernel_addr}\0"                                \
	"flash_self=run ramargs addip;"                                 \
	       "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
	"net_nfs=tftp 0x210000 ${bootfile};run nfsargs addip;bootm\0"     \
	"rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0"                                  \
	"bootfile=pImage-sc855t\0"                           \
	"kernel_addr=48000000\0"                                        \
	"ramdisk_addr=48100000\0"                                       \
	""
#define CONFIG_BOOTCOMMAND							\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
	"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/


#ifdef CONFIG_LCD
# undef	 CONFIG_STATUS_LED		/* disturbs display		*/
#else
# define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
#endif	/* CONFIG_LCD */

#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE

#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE

/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#ifdef  CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/

#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CONFIG_SYS_IMMR		0xFF000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define	CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0x40000000
#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define	CONFIG_ENV_IS_IN_FLASH	1

#ifdef CONFIG_BOOT_8B
#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
#elif defined (CONFIG_BOOT_16B)
#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
#elif defined (CONFIG_BOOT_32B)
#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
#endif

/* Address and size of Redundant Environment Sector     */
#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)


/*-----------------------------------------------------------------------
 * Hardware Information Block
 */
#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
#define CONFIG_SYS_HWINFO_MAGIC	0x46454C38	/* 'SVM8' */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
/*#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
*/
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CONFIG_SYS_SYPCR 0xffffff88
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#ifndef	CONFIG_CAN_DRIVER
/*#define CONFIG_SYS_SIUMCR 0x00610c00	*/
#define CONFIG_SYS_SIUMCR 0x00000000
#else	/* we must activate GPL5 in the SIUMCR for CAN */
#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
#endif	/* CONFIG_CAN_DRIVER */

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CONFIG_SYS_TBSCR	0x0001

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_RTCSC	0x00c3

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CONFIG_SYS_PISCR	0x0000

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 */
#if defined (CONFIG_100MHz)
#define CONFIG_SYS_PLPRCR 0x06301000
#define CONFIG_8xx_GCLK_FREQ 100000000
#elif defined (CONFIG_80MHz)
#define CONFIG_SYS_PLPRCR 0x04f01000
#define CONFIG_8xx_GCLK_FREQ 80000000
#elif defined(CONFIG_75MHz)
#define CONFIG_SYS_PLPRCR 0x04a00100
#define CONFIG_8xx_GCLK_FREQ 75000000
#elif defined(CONFIG_66MHz)
#define CONFIG_SYS_PLPRCR 0x04101000
#define CONFIG_8xx_GCLK_FREQ 66000000
#elif defined(CONFIG_50MHz)
#define CONFIG_SYS_PLPRCR 0x03101000
#define CONFIG_8xx_GCLK_FREQ 50000000
#endif

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#ifdef	CONFIG_BUS_DIV2
#define CONFIG_SYS_SCCR	0x02020000 | SCCR_RTSEL
#else			/* up to 50 MHz we use a 1:1 clock */
#define CONFIG_SYS_SCCR    0x02000000 | SCCR_RTSEL
#endif

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 *-----------------------------------------------------------------------
 */

#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/

#define	CONFIG_IDE_8xx_DIRECT	1	/* Direct IDE    not supported	*/
#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/

#define CONFIG_SYS_ATA_BASE_ADDR       0xFE100010
#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
/*#define CONFIG_SYS_ATA_IDE1_OFFSET     0x0C00 */
#define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O
					   */
#define CONFIG_SYS_ATA_REG_OFFSET      0x0200  /* Offset for normal register accesses
					   */
#define CONFIG_SYS_ATA_ALT_OFFSET      0x0210  /* Offset for alternate registers
					   */
#define CONFIG_ATAPI
#define CONFIG_SYS_PIO_MODE 0

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
/*#define	CONFIG_SYS_DER	0x2002000F*/
#define CONFIG_SYS_DER	0x0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

/*
 * FLASH timing:
 */
#if defined(CONFIG_100MHz)
#define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4
#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
#define CONFIG_SYS_MxMR_PTx 0x61000000
#define CONFIG_SYS_MPTPR 0x400

#elif  defined(CONFIG_80MHz)
#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
#define CONFIG_SYS_MxMR_PTx 0x4e000000
#define CONFIG_SYS_MPTPR 0x400

#elif defined(CONFIG_75MHz)
#define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4
#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
#define CONFIG_SYS_MxMR_PTx 0x49000000
#define CONFIG_SYS_MPTPR 0x400

#elif defined(CONFIG_66MHz)
#define CONFIG_SYS_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
	OR_SCY_3_CLK | OR_EHTR | OR_BI)
/*#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 */
#define CONFIG_SYS_OR_TIMING_DOC   0x000003f4
#define CONFIG_SYS_MxMR_PTx  0x40000000
#define CONFIG_SYS_MPTPR 0x400

#else		/*   50 MHz */
#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
#define CONFIG_SYS_MxMR_PTx  0x30000000
#define CONFIG_SYS_MPTPR 0x400
#endif	/*CONFIG_??MHz */


#if  defined (CONFIG_BOOT_8B)   /* 512K X 8 ,29F040 , 2MB space */
#define CONFIG_SYS_OR0_PRELIM	(0xffe00000 | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
#elif  defined (CONFIG_BOOT_16B)   /* 29lv160 X 16 , 4MB space */
#define CONFIG_SYS_OR0_PRELIM	(0xffc00000 | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
#elif defined( CONFIG_BOOT_32B )  /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
#define CONFIG_SYS_OR0_PRELIM	(0xfc000000 | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
#else
#error Boot device port size missing.
#endif

/*
 * Disk-On-Chip configuration
 */

#define CONFIG_SYS_DOC_SHORT_TIMEOUT
#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */

#define CONFIG_SYS_DOC_SUPPORT_2000
#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
#define CONFIG_SYS_DOC_BASE 0x80000000

#endif	/* __CONFIG_H */
Commit	Line	Data
dc7c9a1a WD	1	/*
	2	* (C) Copyright 2000, 2001, 2002
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific,
	26	* for SinoVee Microsystems SC8xx series SBC
	27	* http://www.fel.com.cn (Chinese)
	28	* http://www.sinovee.com (English)
	29	*/
	30
	31	#ifndef __CONFIG_H
	32	#define __CONFIG_H
	33
2ae18241 WD	34	#define CONFIG_SYS_TEXT_BASE 0x40000000
2ae18241 WD	35
dc7c9a1a WD	36	/* Custom configuration */
	37	/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
	38	/* SC85T,SC860T, FEL8xx-AT(855T/860T) */
	39	/#define CONFIG_FEL8xx_AT /
	40	/#define CONFIG_LCD /
	41	/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
	42	/* #define CONFIG_50MHz */
	43	/* #define CONFIG_66MHz */
	44	/* #define CONFIG_75MHz */
	45	#define CONFIG_80MHz
	46	/#define CONFIG_100MHz /
	47	/* #define CONFIG_BUS_DIV2 1 */
	48	/* for BOOT device port size */
	49	/* #define CONFIG_BOOT_8B */
	50	#define CONFIG_BOOT_16B
	51	/* #define CONFIG_BOOT_32B */
	52	/* #define CONFIG_CAN_DRIVER */
	53	/* #define DEBUG */
	54	#define CONFIG_FEC_ENET
	55
	56	/* #define CONFIG_SDRAM_16M */
	57	#define CONFIG_SDRAM_32M
	58	/* #define CONFIG_SDRAM_64M */
6d0f6bcf	59	#define CONFIG_SYS_RESET_ADDRESS 0xffffffff
dc7c9a1a WD	60	/*
	61	* High Level Configuration Options
	62	* (easy to change)
	63	*/
	64
	65	/* #define CONFIG_MPC823 1 */
	66	/* #define CONFIG_MPC850 1 */
	67	#define CONFIG_MPC855 1
	68	/* #define CONFIG_MPC860 1 */
	69	/* #define CONFIG_MPC860T 1 */
	70
	71	#undef CONFIG_WATCHDOG /* watchdog */
	72
53677ef1	73	#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */
dc7c9a1a WD	74
dc7c9a1a WD	75	#ifdef CONFIG_LCD /* with LCD controller ? */
fd3103bb	76	/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */
dc7c9a1a WD	77	#endif
	78
	79	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	80	#undef CONFIG_8xx_CONS_SMC2
	81	#undef CONFIG_8xx_CONS_NONE
	82	#define CONFIG_BAUDRATE 19200 /* console baudrate = 115kbps */
	83	#if 0
	84	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	85	#else
	86	#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
	87	#endif
	88
	89	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	90
	91	#define CONFIG_BOARD_TYPES 1 /* support board types */
	92
	93	#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo"
	94
	95	#undef CONFIG_BOOTARGS
	96	#define CONFIG_EXTRA_ENV_SETTINGS \
8bde7f77	97	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b	98	"nfsroot=${serverip}:${rootpath}\0" \
8bde7f77	99	"ramargs=setenv bootargs root=/dev/ram rw\0" \
fe126d8b WD	100	"addip=setenv bootargs ${bootargs} " \
	101	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	102	":${hostname}:${netdev}:off panic=1\0" \
8bde7f77	103	"flash_nfs=run nfsargs addip;" \
fe126d8b	104	"bootm ${kernel_addr}\0" \
8bde7f77	105	"flash_self=run ramargs addip;" \
fe126d8b WD	106	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
fe126d8b WD	107	"net_nfs=tftp 0x210000 ${bootfile};run nfsargs addip;bootm\0" \
8bde7f77 WD	108	"rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0" \
	109	"bootfile=pImage-sc855t\0" \
	110	"kernel_addr=48000000\0" \
	111	"ramdisk_addr=48100000\0" \
	112	""
dc7c9a1a	113	#define CONFIG_BOOTCOMMAND \
53677ef1 WD	114	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
53677ef1 WD	115	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
dc7c9a1a WD	116	"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
	117
	118	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	119	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
dc7c9a1a WD	120
	121
	122	#ifdef CONFIG_LCD
	123	# undef CONFIG_STATUS_LED /* disturbs display */
	124	#else
	125	# define CONFIG_STATUS_LED 1 /* Status LED enabled */
	126	#endif /* CONFIG_LCD */
	127
	128	#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
	129
d3b8c1a7 JL	130	/*
	131	* BOOTP options
	132	*/
	133	#define CONFIG_BOOTP_SUBNETMASK
	134	#define CONFIG_BOOTP_GATEWAY
	135	#define CONFIG_BOOTP_HOSTNAME
	136	#define CONFIG_BOOTP_BOOTPATH
	137	#define CONFIG_BOOTP_BOOTFILESIZE
dc7c9a1a WD	138
	139	#define CONFIG_MAC_PARTITION
	140	#define CONFIG_DOS_PARTITION
	141
	142	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	143
46da1e96 JL	144
	145	/*
	146	* Command line configuration.
	147	*/
	148	#include <config_cmd_default.h>
	149
	150	#define CONFIG_CMD_ASKENV
	151	#define CONFIG_CMD_DHCP
46da1e96 JL	152	#define CONFIG_CMD_DATE
46da1e96 JL	153
dc7c9a1a WD	154	/*
	155	* Miscellaneous configurable options
	156	*/
6d0f6bcf JCPV	157	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	158	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
dc7c9a1a	159
6d0f6bcf JCPV	160	#ifdef CONFIG_SYS_HUSH_PARSER
6d0f6bcf JCPV	161	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
dc7c9a1a WD	162	#endif
dc7c9a1a WD	163
46da1e96	164	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	165	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
dc7c9a1a	166	#else
6d0f6bcf	167	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
dc7c9a1a	168	#endif
6d0f6bcf JCPV	169	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	170	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	171	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
dc7c9a1a	172
6d0f6bcf JCPV	173	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	174	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
dc7c9a1a	175
6d0f6bcf	176	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
dc7c9a1a	177
6d0f6bcf	178	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
dc7c9a1a	179
dc7c9a1a WD	180	/*
	181	* Low Level Configuration Settings
	182	* (address mappings, register initial values, etc.)
	183	* You should know what you are doing if you make changes here.
	184	*/
	185	/*-----------------------------------------------------------------------
	186	* Internal Memory Mapped Register
	187	*/
6d0f6bcf	188	#define CONFIG_SYS_IMMR 0xFF000000
dc7c9a1a WD	189
	190	/*-----------------------------------------------------------------------
	191	* Definitions for initial stack pointer and data area (in DPRAM)
	192	*/
6d0f6bcf	193	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
553f0982	194	#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
25ddd1fb	195	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	196	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
dc7c9a1a WD	197
	198	/*-----------------------------------------------------------------------
	199	* Start addresses for the final memory configuration
	200	* (Set up by the startup code)
6d0f6bcf	201	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
dc7c9a1a	202	*/
6d0f6bcf JCPV	203	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	204	#define CONFIG_SYS_FLASH_BASE 0x40000000
	205	#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */
	206	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	207	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
dc7c9a1a WD	208
	209	/*
	210	* For booting Linux, the board info and command line data
	211	* have to be in the first 8 MB of memory, since this is
	212	* the maximum mapped by the Linux kernel during initialization.
	213	*/
6d0f6bcf	214	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
dc7c9a1a WD	215
	216	/*-----------------------------------------------------------------------
	217	* FLASH organization
	218	*/
6d0f6bcf JCPV	219	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
6d0f6bcf JCPV	220	#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
dc7c9a1a	221
6d0f6bcf JCPV	222	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	223	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
dc7c9a1a	224
5a1aceb0	225	#define CONFIG_ENV_IS_IN_FLASH 1
dc7c9a1a WD	226
dc7c9a1a WD	227	#ifdef CONFIG_BOOT_8B
0e8d1586 JCPV	228	#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
0e8d1586 JCPV	229	#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
dc7c9a1a	230	#elif defined (CONFIG_BOOT_16B)
0e8d1586 JCPV	231	#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
0e8d1586 JCPV	232	#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
dc7c9a1a	233	#elif defined (CONFIG_BOOT_32B)
0e8d1586 JCPV	234	#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
0e8d1586 JCPV	235	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
dc7c9a1a WD	236	#endif
	237
	238	/* Address and size of Redundant Environment Sector */
0e8d1586 JCPV	239	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
0e8d1586 JCPV	240	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
dc7c9a1a WD	241
	242
	243	/*-----------------------------------------------------------------------
	244	* Hardware Information Block
	245	*/
6d0f6bcf JCPV	246	#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
	247	#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
	248	#define CONFIG_SYS_HWINFO_MAGIC 0x46454C38 /* 'SVM8' */
dc7c9a1a WD	249
	250	/*-----------------------------------------------------------------------
	251	* Cache Configuration
	252	*/
6d0f6bcf	253	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
46da1e96	254	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	255	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
dc7c9a1a WD	256	#endif
	257
	258	/*-----------------------------------------------------------------------
	259	* SYPCR - System Protection Control 11-9
	260	* SYPCR can only be written once after reset!
	261	*-----------------------------------------------------------------------
	262	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	263	*/
	264	#if defined(CONFIG_WATCHDOG)
6d0f6bcf	265	/*#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
dc7c9a1a WD	266	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
dc7c9a1a WD	267	*/
6d0f6bcf	268	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_SWF \| \
dc7c9a1a WD	269	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
dc7c9a1a WD	270	#else
6d0f6bcf	271	#define CONFIG_SYS_SYPCR 0xffffff88
dc7c9a1a WD	272	#endif
	273
	274	/*-----------------------------------------------------------------------
	275	* SIUMCR - SIU Module Configuration 11-6
	276	*-----------------------------------------------------------------------
	277	* PCMCIA config., multi-function pin tri-state
	278	*/
	279	#ifndef CONFIG_CAN_DRIVER
6d0f6bcf JCPV	280	/#define CONFIG_SYS_SIUMCR 0x00610c00 /
6d0f6bcf JCPV	281	#define CONFIG_SYS_SIUMCR 0x00000000
dc7c9a1a	282	#else /* we must activate GPL5 in the SIUMCR for CAN */
6d0f6bcf	283	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
dc7c9a1a WD	284	#endif /* CONFIG_CAN_DRIVER */
	285
	286	/*-----------------------------------------------------------------------
	287	* TBSCR - Time Base Status and Control 11-26
	288	*-----------------------------------------------------------------------
	289	* Clear Reference Interrupt Status, Timebase freezing enabled
	290	*/
6d0f6bcf	291	#define CONFIG_SYS_TBSCR 0x0001
dc7c9a1a WD	292
	293	/*-----------------------------------------------------------------------
	294	* RTCSC - Real-Time Clock Status and Control Register 11-27
	295	*-----------------------------------------------------------------------
	296	*/
6d0f6bcf	297	#define CONFIG_SYS_RTCSC 0x00c3
dc7c9a1a WD	298
	299	/*-----------------------------------------------------------------------
	300	* PISCR - Periodic Interrupt Status and Control 11-31
	301	*-----------------------------------------------------------------------
	302	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	303	*/
6d0f6bcf	304	#define CONFIG_SYS_PISCR 0x0000
dc7c9a1a WD	305
	306	/*-----------------------------------------------------------------------
	307	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	308	*-----------------------------------------------------------------------
	309	* Reset PLL lock status sticky bit, timer expired status bit and timer
	310	* interrupt status bit
	311	*/
	312	#if defined (CONFIG_100MHz)
6d0f6bcf	313	#define CONFIG_SYS_PLPRCR 0x06301000
dc7c9a1a WD	314	#define CONFIG_8xx_GCLK_FREQ 100000000
dc7c9a1a WD	315	#elif defined (CONFIG_80MHz)
6d0f6bcf	316	#define CONFIG_SYS_PLPRCR 0x04f01000
dc7c9a1a	317	#define CONFIG_8xx_GCLK_FREQ 80000000
8bde7f77	318	#elif defined(CONFIG_75MHz)
6d0f6bcf	319	#define CONFIG_SYS_PLPRCR 0x04a00100
dc7c9a1a	320	#define CONFIG_8xx_GCLK_FREQ 75000000
8bde7f77	321	#elif defined(CONFIG_66MHz)
6d0f6bcf	322	#define CONFIG_SYS_PLPRCR 0x04101000
dc7c9a1a	323	#define CONFIG_8xx_GCLK_FREQ 66000000
8bde7f77	324	#elif defined(CONFIG_50MHz)
6d0f6bcf	325	#define CONFIG_SYS_PLPRCR 0x03101000
dc7c9a1a	326	#define CONFIG_8xx_GCLK_FREQ 50000000
8bde7f77	327	#endif
dc7c9a1a WD	328
	329	/*-----------------------------------------------------------------------
	330	* SCCR - System Clock and reset Control Register 15-27
	331	*-----------------------------------------------------------------------
	332	* Set clock output, timebase and RTC source and divider,
	333	* power management and some other internal clocks
	334	*/
	335	#define SCCR_MASK SCCR_EBDF11
8bde7f77	336	#ifdef CONFIG_BUS_DIV2
6d0f6bcf	337	#define CONFIG_SYS_SCCR 0x02020000 \| SCCR_RTSEL
dc7c9a1a	338	#else /* up to 50 MHz we use a 1:1 clock */
6d0f6bcf	339	#define CONFIG_SYS_SCCR 0x02000000 \| SCCR_RTSEL
8bde7f77	340	#endif
dc7c9a1a WD	341
	342	/*-----------------------------------------------------------------------
	343	* PCMCIA stuff
	344	*-----------------------------------------------------------------------
	345	*
	346	*/
6d0f6bcf JCPV	347	#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
	348	#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
	349	#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
	350	#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
	351	#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
	352	#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	353	#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
	354	#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
dc7c9a1a WD	355
	356	/*-----------------------------------------------------------------------
	357	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
	358	*-----------------------------------------------------------------------
	359	*/
	360
53677ef1	361	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
dc7c9a1a WD	362
	363	#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */
	364	#undef CONFIG_IDE_LED /* LED for ide not supported */
	365	#undef CONFIG_IDE_RESET /* reset for ide not supported */
	366
6d0f6bcf JCPV	367	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
6d0f6bcf JCPV	368	#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
dc7c9a1a	369
6d0f6bcf JCPV	370	#define CONFIG_SYS_ATA_BASE_ADDR 0xFE100010
	371	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	372	/#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0C00 /
	373	#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O
dc7c9a1a	374	*/
6d0f6bcf	375	#define CONFIG_SYS_ATA_REG_OFFSET 0x0200 /* Offset for normal register accesses
dc7c9a1a	376	*/
6d0f6bcf	377	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0210 /* Offset for alternate registers
dc7c9a1a	378	*/
8bde7f77	379	#define CONFIG_ATAPI
6d0f6bcf	380	#define CONFIG_SYS_PIO_MODE 0
dc7c9a1a WD	381
	382	/*-----------------------------------------------------------------------
	383	*
	384	*-----------------------------------------------------------------------
	385	*
	386	*/
6d0f6bcf JCPV	387	/#define CONFIG_SYS_DER 0x2002000F/
6d0f6bcf JCPV	388	#define CONFIG_SYS_DER 0x0
dc7c9a1a WD	389
	390	/*
	391	* Init Memory Controller:
	392	*
	393	* BR0/1 and OR0/1 (FLASH)
	394	*/
	395
	396	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	397	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
	398
	399	/* used to re-map FLASH both when starting from SRAM or FLASH:
	400	* restrict access enough to keep SRAM working (if any)
	401	* but not too much to meddle with FLASH accesses
	402	*/
6d0f6bcf JCPV	403	#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
6d0f6bcf JCPV	404	#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
dc7c9a1a WD	405
	406	/*
	407	* FLASH timing:
	408	*/
8bde7f77	409	#if defined(CONFIG_100MHz)
6d0f6bcf JCPV	410	#define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4
	411	#define CONFIG_SYS_OR_TIMING_DOC 0x000002f4
	412	#define CONFIG_SYS_MxMR_PTx 0x61000000
	413	#define CONFIG_SYS_MPTPR 0x400
dc7c9a1a WD	414
dc7c9a1a WD	415	#elif defined(CONFIG_80MHz)
6d0f6bcf JCPV	416	#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
	417	#define CONFIG_SYS_OR_TIMING_DOC 0x000001f4
	418	#define CONFIG_SYS_MxMR_PTx 0x4e000000
	419	#define CONFIG_SYS_MPTPR 0x400
dc7c9a1a	420
8bde7f77	421	#elif defined(CONFIG_75MHz)
6d0f6bcf JCPV	422	#define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4
	423	#define CONFIG_SYS_OR_TIMING_DOC 0x000002f4
	424	#define CONFIG_SYS_MxMR_PTx 0x49000000
	425	#define CONFIG_SYS_MPTPR 0x400
dc7c9a1a WD	426
dc7c9a1a WD	427	#elif defined(CONFIG_66MHz)
6d0f6bcf	428	#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 \| OR_TRLX \| OR_CSNT_SAM \| \
8bde7f77	429	OR_SCY_3_CLK \| OR_EHTR \| OR_BI)
6d0f6bcf JCPV	430	/#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 /
	431	#define CONFIG_SYS_OR_TIMING_DOC 0x000003f4
	432	#define CONFIG_SYS_MxMR_PTx 0x40000000
	433	#define CONFIG_SYS_MPTPR 0x400
dc7c9a1a WD	434
dc7c9a1a WD	435	#else /* 50 MHz */
6d0f6bcf JCPV	436	#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
	437	#define CONFIG_SYS_OR_TIMING_DOC 0x000001f4
	438	#define CONFIG_SYS_MxMR_PTx 0x30000000
	439	#define CONFIG_SYS_MPTPR 0x400
dc7c9a1a WD	440	#endif /CONFIG_??MHz /
	441
	442
	443	#if defined (CONFIG_BOOT_8B) /* 512K X 8 ,29F040 , 2MB space */
6d0f6bcf JCPV	444	#define CONFIG_SYS_OR0_PRELIM (0xffe00000 \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	445	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V \| BR_PS_8)
dc7c9a1a	446	#elif defined (CONFIG_BOOT_16B) /* 29lv160 X 16 , 4MB space */
6d0f6bcf JCPV	447	#define CONFIG_SYS_OR0_PRELIM (0xffc00000 \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	448	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V \| BR_PS_16)
dc7c9a1a	449	#elif defined( CONFIG_BOOT_32B ) /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
6d0f6bcf JCPV	450	#define CONFIG_SYS_OR0_PRELIM (0xfc000000 \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	451	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
dc7c9a1a WD	452	#else
	453	#error Boot device port size missing.
	454	#endif
	455
	456	/*
	457	* Disk-On-Chip configuration
	458	*/
	459
6d0f6bcf JCPV	460	#define CONFIG_SYS_DOC_SHORT_TIMEOUT
6d0f6bcf JCPV	461	#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
dc7c9a1a	462
6d0f6bcf JCPV	463	#define CONFIG_SYS_DOC_SUPPORT_2000
	464	#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
	465	#define CONFIG_SYS_DOC_BASE 0x80000000
dc7c9a1a	466
dc7c9a1a	467	#endif /* __CONFIG_H */