[people/ms/u-boot.git] / include / configs / tam3517-common.h

/*
 * Copyright (C) 2011
 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
 *
 * Copyright (C) 2009 TechNexion Ltd.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __TAM3517_H
#define __TAM3517_H

/*
 * High Level Configuration Options
 */

#define CONFIG_SYS_TEXT_BASE 0x80008000

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap.h>

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10) + \
					2 * 1024 * 1024)
/*
 * DDR related
 */
#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		48000000	/* 48MHz (APLL96/2) */

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
#define CONFIG_SERIAL1			/* UART1 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}
/* EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access */
							/* nand at CS0 */

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
							/* NAND devices */

#define CONFIG_AUTO_COMPLETE

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */

#define CONFIG_SYS_MAXARGS		32	/* max number of command */
						/* args */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
								/* address */

/*
 * AM3517 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */

/* Redundant Environment */
#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
#define CONFIG_ENV_OFFSET		0x180000
#define CONFIG_ENV_ADDR			0x180000
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
						2 * CONFIG_SYS_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)

/*
 * ethernet support, EMAC
 *
 */
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
#define CONFIG_MII
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT 10

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_CONSOLE
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */

#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC

#define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
					 CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK

#define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
#define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

/* FAT */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"

/* RAW SD card / eMMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */

/* NAND boot config */
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
#define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47,\
					 48, 49, 50, 51, 52, 53, 54, 55,\
					 56, 57, 58, 59, 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE		256
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW

#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000

#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

/* Setup MTD for NAND on the SOM */

#define	CONFIG_TAM3517_SETTINGS						\
	"netdev=eth0\0"							\
	"nandargs=setenv bootargs root=${nandroot} "			\
		"rootfstype=${nandrootfstype}\0"			\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"				\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttyO0,${baudrate}\0"				\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"loadaddr=82000000\0"						\
	"kernel_addr_r=82000000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"nandboot=run nandargs addip addtty addmtd addmisc;"		\
		"nand read ${kernel_addr_r} kernel\0"			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self=if run net_self_load;then "				\
		"run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
		"else echo Images not loades;fi\0"			\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0"		\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"loadmlo=tftp ${loadaddr} ${mlo}\0"				\
	"mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0"			\
	"uboot_addr=0x80000\0"						\
	"update=nandecc sw;nand erase ${uboot_addr} 100000;"		\
		"nand write ${loadaddr} ${uboot_addr} 80000\0"		\
	"updatemlo=nandecc hw;nand erase 0 20000;"			\
		"nand write ${loadaddr} 0 20000\0"			\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\

/*
 * this is common code for all TAM3517 boards.
 * MAC address is stored from manufacturer in
 * I2C EEPROM
 */
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
/*
 * The I2C EEPROM on the TAM3517 contains
 * mac address and production data
 */
struct tam3517_module_info {
	char customer[48];
	char product[48];

	/*
	 * bit 0~47  : sequence number
	 * bit 48~55 : week of year, from 0.
	 * bit 56~63 : year
	 */
	unsigned long long sequence_number;

	/*
	 * bit 0~7   : revision fixed
	 * bit 8~15  : revision major
	 * bit 16~31 : TNxxx
	 */
	unsigned int revision;
	unsigned char eth_addr[4][8];
	unsigned char _rev[100];
};

#define TAM3517_READ_EEPROM(info, ret) \
do {								\
	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,		\
		(void *)info, sizeof(*info)))			\
		ret = 1;					\
	else							\
		ret = 0;					\
} while (0)

#define TAM3517_READ_MAC_FROM_EEPROM(info)			\
do {								\
	char buf[80], ethname[20];				\
	int i;							\
	memset(buf, 0, sizeof(buf));				\
	for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) {	\
		sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",	\
			(info)->eth_addr[i][5],			\
			(info)->eth_addr[i][4],			\
			(info)->eth_addr[i][3],			\
			(info)->eth_addr[i][2],			\
			(info)->eth_addr[i][1],			\
			(info)->eth_addr[i][0]);			\
								\
		if (i)						\
			sprintf(ethname, "eth%daddr", i);	\
		else						\
			strcpy(ethname, "ethaddr");		\
		printf("Setting %s from EEPROM with %s\n", ethname, buf);\
		env_set(ethname, buf);				\
	}							\
} while (0)

/* The following macros are taken from Technexion's documentation */
#define TAM3517_sequence_number(info) \
	((info)->sequence_number % 0x1000000000000LL)
#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
#define TAM3517_year(info) ((info)->sequence_number >> 56)
#define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
#define TAM3517_revision_tn(info) ((info)->revision >> 16)

#define TAM3517_PRINT_SOM_INFO(info)				\
do {								\
	printf("Vendor:%s\n", (info)->customer);		\
	printf("SOM:   %s\n", (info)->product);			\
	printf("SeqNr: %02llu%02llu%012llu\n",			\
		TAM3517_year(info),				\
		TAM3517_week_of_year(info),			\
		TAM3517_sequence_number(info));			\
	printf("Rev:   TN%u %u.%u\n",				\
		TAM3517_revision_tn(info),			\
		TAM3517_revision_major(info),			\
		TAM3517_revision_fixed(info));			\
} while (0)

#endif

#endif /* __TAM3517_H */
Commit	Line	Data
f9c6fac4 SB	1	/*
	2	* Copyright (C) 2011
	3	* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
	4	*
	5	* Copyright (C) 2009 TechNexion Ltd.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
f9c6fac4 SB	8	*/
	9
	10	#ifndef __TAM3517_H
	11	#define __TAM3517_H
	12
	13	/*
	14	* High Level Configuration Options
	15	*/
f9c6fac4 SB	16
	17	#define CONFIG_SYS_TEXT_BASE 0x80008000
	18
f9c6fac4	19	#include <asm/arch/cpu.h> /* get chip and board defs */
987ec585	20	#include <asm/arch/omap.h>
f9c6fac4	21
f9c6fac4 SB	22	/* Clock Defines */
	23	#define V_OSCK 26000000 /* Clock output from T2 */
	24	#define V_SCLK (V_OSCK >> 1)
	25
f9c6fac4 SB	26	#define CONFIG_MISC_INIT_R
	27
	28	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	29	#define CONFIG_SETUP_MEMORY_TAGS
	30	#define CONFIG_INITRD_TAG
	31	#define CONFIG_REVISION_TAG
	32
	33	/*
	34	* Size of malloc() pool
	35	*/
	36	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
	37	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \
	38	2 * 1024 * 1024)
	39	/*
	40	* DDR related
	41	*/
f9c6fac4 SB	42	#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
	43
	44	/*
	45	* Hardware drivers
	46	*/
	47
	48	/*
	49	* NS16550 Configuration
	50	*/
f9c6fac4 SB	51	#define CONFIG_SYS_NS16550_SERIAL
	52	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	53	#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	54
	55	/*
	56	* select serial console configuration
	57	*/
	58	#define CONFIG_CONS_INDEX 1
	59	#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
	60	#define CONFIG_SERIAL1 /* UART1 */
	61
	62	/* allow to overwrite serial and ethaddr */
	63	#define CONFIG_ENV_OVERWRITE
f9c6fac4 SB	64	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
f9c6fac4 SB	65	115200}
f9c6fac4	66	/* EHCI */
f9c6fac4	67	#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25
f9c6fac4	68
6789e84e	69	#define CONFIG_SYS_I2C
8103c6f0 SB	70	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
	71	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
	72	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
f9c6fac4 SB	73
	74	/*
	75	* Board NAND Info.
	76	*/
	77	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	78	/* to access */
	79	/* nand at CS0 */
	80
	81	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	82	/* NAND devices */
f9c6fac4 SB	83
	84	#define CONFIG_AUTO_COMPLETE
	85
	86	/*
	87	* Miscellaneous configurable options
	88	*/
	89	#define CONFIG_SYS_LONGHELP /* undef to save memory */
f9c6fac4 SB	90	#define CONFIG_CMDLINE_EDITING
	91	#define CONFIG_AUTO_COMPLETE
	92	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	93
f9c6fac4 SB	94	#define CONFIG_SYS_MAXARGS 32 /* max number of command */
f9c6fac4 SB	95	/* args */
f9c6fac4 SB	96	/* memtest works on */
	97	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	98	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	99	0x01F00000) /* 31MB */
	100
	101	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
	102	/* address */
	103
	104	/*
	105	* AM3517 has 12 GP timers, they can be driven by the system clock
	106	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	107	* This rate is divided by a local divisor.
	108	*/
	109	#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
	110	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
f9c6fac4	111
f9c6fac4 SB	112	/*
	113	* Physical Memory Map
	114	*/
	115	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	116	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
f9c6fac4 SB	117	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
	118
	119	/*
	120	* FLASH and environment organization
	121	*/
	122
	123	/* ** PISMO SUPPORT * */
f9c6fac4 SB	124
	125	/* Redundant Environment */
	126	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
7672d9d5 AF	127	#define CONFIG_ENV_OFFSET 0x180000
7672d9d5 AF	128	#define CONFIG_ENV_ADDR 0x180000
f9c6fac4 SB	129	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	130	2 * CONFIG_SYS_ENV_SECT_SIZE)
	131	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	132
	133	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	134	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	135	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	136	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	137	CONFIG_SYS_INIT_RAM_SIZE - \
	138	GENERATED_GBL_DATA_SIZE)
	139
	140	/*
	141	* ethernet support, EMAC
	142	*
	143	*/
	144	#define CONFIG_DRIVER_TI_EMAC
	145	#define CONFIG_DRIVER_TI_EMAC_USE_RMII
	146	#define CONFIG_MII
f9c6fac4 SB	147	#define CONFIG_BOOTP_DNS
	148	#define CONFIG_BOOTP_DNS2
	149	#define CONFIG_BOOTP_SEND_HOSTNAME
	150	#define CONFIG_NET_RETRY_COUNT 10
f9c6fac4 SB	151
f9c6fac4 SB	152	/* Defines for SPL */
47f7bcae	153	#define CONFIG_SPL_FRAMEWORK
f9c6fac4	154	#define CONFIG_SPL_CONSOLE
8ad59c9a	155	#define CONFIG_SPL_NAND_SOFTECC
f9c6fac4 SB	156	#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */
f9c6fac4 SB	157
6f2f01b9 SW	158	#define CONFIG_SPL_NAND_BASE
	159	#define CONFIG_SPL_NAND_DRIVERS
	160	#define CONFIG_SPL_NAND_ECC
f9c6fac4 SB	161
f9c6fac4 SB	162	#define CONFIG_SPL_TEXT_BASE 0x40200000 /CONFIG_SYS_SRAM_START/
fa2f81b0 TR	163	#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
fa2f81b0 TR	164	CONFIG_SPL_TEXT_BASE)
f51c8a99	165	#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
f9c6fac4 SB	166
	167	#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000
	168	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
	169	#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */
	170	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	171
f51c8a99 SB	172	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	173	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	174
	175	/* FAT */
	176	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
	177	#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
	178
	179	/* RAW SD card / eMMC */
	180	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
	181	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
	182	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
	183
f9c6fac4 SB	184	/* NAND boot config */
	185	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	186	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	187	#define CONFIG_SYS_NAND_OOBSIZE 64
	188	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	189	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	190	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
	191	#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\
	192	48, 49, 50, 51, 52, 53, 54, 55,\
	193	56, 57, 58, 59, 60, 61, 62, 63}
	194	#define CONFIG_SYS_NAND_ECCSIZE 256
	195	#define CONFIG_SYS_NAND_ECCBYTES 3
3f719069	196	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
f9c6fac4	197
f9c6fac4 SB	198	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	199
	200	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	201	#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
	202
f9c6fac4 SB	203	#define CONFIG_MTD_PARTITIONS
f9c6fac4 SB	204	#define CONFIG_MTD_DEVICE
f9c6fac4 SB	205
f9c6fac4 SB	206	/* Setup MTD for NAND on the SOM */
f9c6fac4	207
f9c6fac4 SB	208	#define CONFIG_TAM3517_SETTINGS \
	209	"netdev=eth0\0" \
	210	"nandargs=setenv bootargs root=${nandroot} " \
	211	"rootfstype=${nandrootfstype}\0" \
	212	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	213	"nfsroot=${serverip}:${rootpath}\0" \
	214	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	215	"addip_sta=setenv bootargs ${bootargs} " \
	216	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	217	":${hostname}:${netdev}:off panic=1\0" \
	218	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
	219	"addip=if test -n ${ipdyn};then run addip_dyn;" \
	220	"else run addip_sta;fi\0" \
	221	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	222	"addtty=setenv bootargs ${bootargs}" \
	223	" console=ttyO0,${baudrate}\0" \
	224	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
	225	"loadaddr=82000000\0" \
	226	"kernel_addr_r=82000000\0" \
93ea89f0 MV	227	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
93ea89f0 MV	228	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
f9c6fac4 SB	229	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	230	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	231	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	232	"bootm ${kernel_addr}\0" \
	233	"nandboot=run nandargs addip addtty addmtd addmisc;" \
	234	"nand read ${kernel_addr_r} kernel\0" \
	235	"bootm ${kernel_addr_r}\0" \
	236	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	237	"run nfsargs addip addtty addmtd addmisc;" \
	238	"bootm ${kernel_addr_r}\0" \
	239	"net_self=if run net_self_load;then " \
	240	"run ramargs addip addtty addmtd addmisc;" \
	241	"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
	242	"else echo Images not loades;fi\0" \
93ea89f0	243	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \
f9c6fac4 SB	244	"load=tftp ${loadaddr} ${u-boot}\0" \
f9c6fac4 SB	245	"loadmlo=tftp ${loadaddr} ${mlo}\0" \
93ea89f0	246	"mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \
f9c6fac4 SB	247	"uboot_addr=0x80000\0" \
	248	"update=nandecc sw;nand erase ${uboot_addr} 100000;" \
	249	"nand write ${loadaddr} ${uboot_addr} 80000\0" \
	250	"updatemlo=nandecc hw;nand erase 0 20000;" \
	251	"nand write ${loadaddr} 0 20000\0" \
	252	"upd=if run load;then echo Updating u-boot;if run update;" \
	253	"then echo U-Boot updated;" \
	254	"else echo Error updating u-boot !;" \
	255	"echo Board without bootloader !!;" \
	256	"fi;" \
	257	"else echo U-Boot not downloaded..exiting;fi\0" \
	258
8103c6f0 SB	259	/*
	260	* this is common code for all TAM3517 boards.
	261	* MAC address is stored from manufacturer in
	262	* I2C EEPROM
	263	*/
	264	#if !(defined(__KERNEL_STRICT_NAMES) \|\| defined(__ASSEMBLY__))
8103c6f0 SB	265	/*
	266	* The I2C EEPROM on the TAM3517 contains
	267	* mac address and production data
	268	*/
	269	struct tam3517_module_info {
	270	char customer[48];
	271	char product[48];
	272
	273	/*
	274	* bit 0~47 : sequence number
	275	* bit 48~55 : week of year, from 0.
	276	* bit 56~63 : year
	277	*/
	278	unsigned long long sequence_number;
	279
	280	/*
	281	* bit 0~7 : revision fixed
	282	* bit 8~15 : revision major
	283	* bit 16~31 : TNxxx
	284	*/
	285	unsigned int revision;
	286	unsigned char eth_addr[4][8];
	287	unsigned char _rev[100];
	288	};
	289
31f5b651 SB	290	#define TAM3517_READ_EEPROM(info, ret) \
31f5b651 SB	291	do { \
6789e84e	292	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
8103c6f0	293	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \
31f5b651 SB	294	(void )info, sizeof(info))) \
	295	ret = 1; \
	296	else \
	297	ret = 0; \
	298	} while (0)
	299
	300	#define TAM3517_READ_MAC_FROM_EEPROM(info) \
	301	do { \
	302	char buf[80], ethname[20]; \
	303	int i; \
8103c6f0	304	memset(buf, 0, sizeof(buf)); \
31f5b651	305	for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \
8103c6f0	306	sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \
31f5b651 SB	307	(info)->eth_addr[i][5], \
	308	(info)->eth_addr[i][4], \
	309	(info)->eth_addr[i][3], \
	310	(info)->eth_addr[i][2], \
	311	(info)->eth_addr[i][1], \
	312	(info)->eth_addr[i][0]); \
8103c6f0 SB	313	\
	314	if (i) \
	315	sprintf(ethname, "eth%daddr", i); \
	316	else \
192bc694	317	strcpy(ethname, "ethaddr"); \
8103c6f0	318	printf("Setting %s from EEPROM with %s\n", ethname, buf);\
382bee57	319	env_set(ethname, buf); \
8103c6f0 SB	320	} \
8103c6f0 SB	321	} while (0)
31f5b651 SB	322
	323	/* The following macros are taken from Technexion's documentation */
	324	#define TAM3517_sequence_number(info) \
	325	((info)->sequence_number % 0x1000000000000LL)
	326	#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
	327	#define TAM3517_year(info) ((info)->sequence_number >> 56)
	328	#define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
	329	#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
	330	#define TAM3517_revision_tn(info) ((info)->revision >> 16)
	331
	332	#define TAM3517_PRINT_SOM_INFO(info) \
	333	do { \
	334	printf("Vendor:%s\n", (info)->customer); \
	335	printf("SOM: %s\n", (info)->product); \
	336	printf("SeqNr: %02llu%02llu%012llu\n", \
	337	TAM3517_year(info), \
	338	TAM3517_week_of_year(info), \
	339	TAM3517_sequence_number(info)); \
	340	printf("Rev: TN%u %u.%u\n", \
	341	TAM3517_revision_tn(info), \
	342	TAM3517_revision_major(info), \
	343	TAM3517_revision_fixed(info)); \
	344	} while (0)
	345
8103c6f0 SB	346	#endif
8103c6f0 SB	347
f9c6fac4	348	#endif /* __TAM3517_H */