[people/ms/u-boot.git] / include / configs / tbs2910.h

/*
 * Copyright (C) 2014 Soeren Moch <smoch@web.de>
 *
 * Configuration settings for the TBS2910 MatrixARM board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __TBS2910_CONFIG_H
#define __TBS2910_CONFIG_H

#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

/* General configuration */
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_SYS_THUMB_BUILD

#define CONFIG_MACH_TYPE		3980

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO
#define CONFIG_CMD_GPIO

#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT		"Matrix U-Boot> "
#define CONFIG_BOOTDELAY		3
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN		(128 * 1024 * 1024)

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END \
	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)

#define CONFIG_SYS_TEXT_BASE		0x80000000
#define CONFIG_SYS_BOOTMAPSZ		0x6C000000
#define CONFIG_SYS_LOAD_ADDR		0x10800000

/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_CONSOLE_MUX
#define CONFIG_CONS_INDEX		1

/* *** Command definition *** */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_MEMTEST
#define CONFIG_CMD_TIME

/* Filesystems / image support */
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_FS_GENERIC

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_FIT

/* MMC */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_USDHC_NUM	3
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER

/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Framebuffer */
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_CFB_CONSOLE
#define CONFIG_CFB_CONSOLE_ANSI
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_CMD_HDMIDETECT
#endif

/* PCI */
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
#endif

/* SATA */
#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* USB */
#define CONFIG_CMD_USB
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_USB_STORAGE
#define CONFIG_USB_KEYBOARD
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
#endif /* CONFIG_USB_KEYBOARD */
#endif /* CONFIG_CMD_USB      */

/* RTC */
#define CONFIG_CMD_DATE
#ifdef CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_RTC_DS1307
#define CONFIG_SYS_RTC_BUS_NUM		2
#endif

/* I2C */
#define CONFIG_CMD_I2C
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_EDID
#endif

/* Fuses */
#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

/* Flash and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		2
#define CONFIG_SYS_MMC_ENV_PART		1
#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_OFFSET		(384 * 1024)
#define CONFIG_ENV_OVERWRITE

#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
			"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
	"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
	"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
			"${bootargs_mmc3}\0" \
	"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
			"rdinit=/sbin/init enable_wait_mode=off\0" \
	"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
			"mmc read 0x10800000 0x800 0x4000; bootm\0" \
	"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
	"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
			"run bootargs_upd; " \
			"bootm 0x10800000 0x10d00000\0" \
	"console=ttymxc0\0" \
	"fan=gpio set 92\0" \
	"stdin=serial,usbkbd\0" \
	"stdout=serial,vga\0" \
	"stderr=serial,vga\0"

#define CONFIG_BOOTCOMMAND \
	"mmc rescan; " \
	"if run bootcmd_up1; then " \
		"run bootcmd_up2; " \
	"else " \
		"run bootcmd_mmc; " \
	"fi"

#endif			       /* __TBS2910_CONFIG_H * */
Commit	Line	Data
05d492a3 SM	1	/*
	2	* Copyright (C) 2014 Soeren Moch <smoch@web.de>
	3	*
	4	* Configuration settings for the TBS2910 MatrixARM board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __TBS2910_CONFIG_H
	10	#define __TBS2910_CONFIG_H
	11
	12	#include "mx6_common.h"
	13	#include <asm/arch/imx-regs.h>
	14	#include <asm/imx-common/gpio.h>
	15
	16	/* General configuration */
	17	#define CONFIG_MX6
	18	#define CONFIG_DISPLAY_CPUINFO
	19	#define CONFIG_DISPLAY_BOARDINFO_LATE
	20	#define CONFIG_SYS_THUMB_BUILD
	21
	22	#define CONFIG_MACH_TYPE 3980
	23
	24	#define CONFIG_CMDLINE_TAG
	25	#define CONFIG_SETUP_MEMORY_TAGS
	26	#define CONFIG_INITRD_TAG
	27	#define CONFIG_REVISION_TAG
	28	#define CONFIG_SYS_GENERIC_BOARD
	29
	30	#define CONFIG_BOARD_EARLY_INIT_F
	31	#define CONFIG_MXC_GPIO
	32	#define CONFIG_CMD_GPIO
	33
	34	#define CONFIG_SYS_LONGHELP
	35	#define CONFIG_SYS_HUSH_PARSER
	36	#define CONFIG_SYS_PROMPT "Matrix U-Boot> "
	37	#define CONFIG_BOOTDELAY 3
	38	#define CONFIG_AUTO_COMPLETE
	39	#define CONFIG_CMDLINE_EDITING
	40	#define CONFIG_SYS_MAXARGS 16
	41	#define CONFIG_SYS_CBSIZE 1024
	42	#define CONFIG_SYS_PBSIZE \
	43	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	44	#define CONFIG_SYS_HZ 1000
	45
	46	/* Physical Memory Map */
	47	#define CONFIG_NR_DRAM_BANKS 1
	48	#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
	49
	50	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	51	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	52	#define CONFIG_SYS_INIT_SP_OFFSET \
	53	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	54	#define CONFIG_SYS_INIT_SP_ADDR \
	55	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	56
	57	#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
	58
	59	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	60	#define CONFIG_SYS_MEMTEST_END \
	61	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
	62
	63	#define CONFIG_SYS_TEXT_BASE 0x80000000
	64	#define CONFIG_SYS_BOOTMAPSZ 0x6C000000
65	#define CONFIG_SYS_LOAD_ADDR 0x10800000
66
67	/* Serial console */
68	#define CONFIG_MXC_UART
69	#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
70	#define CONFIG_BAUDRATE 115200
71
72	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
73	#define CONFIG_CONSOLE_MUX
74	#define CONFIG_CONS_INDEX 1
75
76	/* * Command definition * */
77	#include <config_cmd_default.h>
78
79	#undef CONFIG_CMD_IMLS
80
81	#define CONFIG_CMD_BMODE
82	#define CONFIG_CMD_SETEXPR
83	#define CONFIG_CMD_MEMTEST
84	#define CONFIG_CMD_TIME
85
86	/* Filesystems / image support */
87	#define CONFIG_CMD_EXT4
88	#define CONFIG_CMD_FAT
89	#define CONFIG_DOS_PARTITION
90	#define CONFIG_EFI_PARTITION
91	#define CONFIG_CMD_FS_GENERIC
92
93	#define CONFIG_OF_LIBFDT
94	#define CONFIG_CMD_BOOTZ
95	#define CONFIG_SUPPORT_RAW_INITRD
96	#define CONFIG_FIT
97
98	/* MMC */
99	#define CONFIG_FSL_ESDHC
100	#define CONFIG_FSL_USDHC
101	#define CONFIG_SYS_FSL_USDHC_NUM 3
102	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
103
104	#define CONFIG_MMC
105	#define CONFIG_CMD_MMC
106	#define CONFIG_GENERIC_MMC
107	#define CONFIG_BOUNCE_BUFFER
108
109	/* Ethernet */
110	#define CONFIG_FEC_MXC
111	#define CONFIG_CMD_PING
112	#define CONFIG_CMD_DHCP
113	#define CONFIG_CMD_MII
114	#define CONFIG_CMD_NET
115	#define CONFIG_FEC_MXC
116	#define CONFIG_MII
117	#define IMX_FEC_BASE ENET_BASE_ADDR
118	#define CONFIG_FEC_XCV_TYPE RGMII
119	#define CONFIG_ETHPRIME "FEC"
120	#define CONFIG_FEC_MXC_PHYADDR 4
121	#define CONFIG_PHYLIB
122	#define CONFIG_PHY_ATHEROS
123
124	/* Framebuffer */
125	#define CONFIG_VIDEO
126	#ifdef CONFIG_VIDEO
127	#define CONFIG_VIDEO_IPUV3
128	#define CONFIG_IPUV3_CLK 260000000
129	#define CONFIG_CFB_CONSOLE
130	#define CONFIG_CFB_CONSOLE_ANSI
131	#define CONFIG_VIDEO_SW_CURSOR
132	#define CONFIG_VGA_AS_SINGLE_DEVICE
133	#define CONFIG_VIDEO_BMP_RLE8
134	#define CONFIG_IMX_HDMI
135	#define CONFIG_IMX_VIDEO_SKIP
136	#define CONFIG_CMD_HDMIDETECT
137	#endif
138
139	/* PCI */
140	#define CONFIG_CMD_PCI
141	#ifdef CONFIG_CMD_PCI
142	#define CONFIG_PCI
143	#define CONFIG_PCI_PNP
144	#define CONFIG_PCI_SCAN_SHOW
145	#define CONFIG_PCIE_IMX
146	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
147	#endif
148
149	/* SATA */
150	#define CONFIG_CMD_SATA
151	#ifdef CONFIG_CMD_SATA
152	#define CONFIG_DWC_AHSATA
153	#define CONFIG_SYS_SATA_MAX_DEVICE 1
154	#define CONFIG_DWC_AHSATA_PORT_ID 0
155	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
156	#define CONFIG_LBA48
157	#define CONFIG_LIBATA
158	#endif
159
160	/* USB */
161	#define CONFIG_CMD_USB
162	#ifdef CONFIG_CMD_USB
163	#define CONFIG_USB_EHCI
164	#define CONFIG_USB_EHCI_MX6
165	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
166	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
167	#define CONFIG_USB_STORAGE
168	#define CONFIG_USB_KEYBOARD
169	#ifdef CONFIG_USB_KEYBOARD
170	#define CONFIG_SYS_USB_EVENT_POLL
171	#define CONFIG_SYS_STDIO_DEREGISTER
172	#define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
173	#endif /* CONFIG_USB_KEYBOARD */
174	#endif /* CONFIG_CMD_USB */
175
176	/* RTC */
177	#define CONFIG_CMD_DATE
178	#ifdef CONFIG_CMD_DATE
179	#define CONFIG_CMD_I2C
180	#define CONFIG_RTC_DS1307
181	#define CONFIG_SYS_RTC_BUS_NUM 2
182	#endif
183
184	/* I2C */
185	#define CONFIG_CMD_I2C
186	#ifdef CONFIG_CMD_I2C
187	#define CONFIG_SYS_I2C
188	#define CONFIG_SYS_I2C_MXC
189	#define CONFIG_SYS_I2C_SPEED 100000
190	#define CONFIG_I2C_EDID
191	#endif
192
193	/* Fuses */
194	#define CONFIG_CMD_FUSE
195	#ifdef CONFIG_CMD_FUSE
196	#define CONFIG_MXC_OCOTP
197	#endif
198
199	#ifndef CONFIG_SYS_DCACHE_OFF
200	#define CONFIG_CMD_CACHE
201	#endif
202
203	/* Flash and environment organization */
204	#define CONFIG_SYS_NO_FLASH
205
206	#define CONFIG_ENV_IS_IN_MMC
207	#define CONFIG_SYS_MMC_ENV_DEV 2
208	#define CONFIG_SYS_MMC_ENV_PART 1
209	#define CONFIG_ENV_SIZE (8 * 1024)
210	#define CONFIG_ENV_OFFSET (384 * 1024)
211	#define CONFIG_ENV_OVERWRITE
212
213	#define CONFIG_EXTRA_ENV_SETTINGS \
214	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
215	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
216	"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
217	"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
218	"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
219	"${bootargs_mmc3}\0" \
220	"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
221	"rdinit=/sbin/init enable_wait_mode=off\0" \
222	"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
223	"mmc read 0x10800000 0x800 0x4000; bootm\0" \
224	"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
225	"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
226	"run bootargs_upd; " \
227	"bootm 0x10800000 0x10d00000\0" \
228	"console=ttymxc0\0" \
229	"fan=gpio set 92\0" \
230	"stdin=serial,usbkbd\0" \
231	"stdout=serial,vga\0" \
232	"stderr=serial,vga\0"
233
234	#define CONFIG_BOOTCOMMAND \
235	"mmc rescan; " \
236	"if run bootcmd_up1; then " \
237	"run bootcmd_up2; " \
238	"else " \
239	"run bootcmd_mmc; " \
240	"fi"
241
242	#endif /* __TBS2910_CONFIG_H * */