]>
Commit | Line | Data |
---|---|---|
5e5803e1 SB |
1 | /* |
2 | * (C) Copyright 2007 | |
3 | * Stefano Babic, DENX Gmbh, sbabic@denx.de | |
4 | * | |
5 | * (C) Copyright 2004 | |
6 | * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net | |
7 | * | |
8 | * (C) Copyright 2002 | |
9 | * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net | |
10 | * | |
11 | * (C) Copyright 2002 | |
12 | * Sysgo Real-Time Solutions, GmbH <www.elinos.com> | |
13 | * Marius Groeger <mgroeger@sysgo.de> | |
14 | * | |
15 | * Configuation settings for the LUBBOCK board. | |
16 | * | |
17 | * See file CREDITS for list of people who contributed to this | |
18 | * project. | |
19 | * | |
20 | * This program is free software; you can redistribute it and/or | |
21 | * modify it under the terms of the GNU General Public License as | |
22 | * published by the Free Software Foundation; either version 2 of | |
23 | * the License, or (at your option) any later version. | |
24 | * | |
25 | * This program is distributed in the hope that it will be useful, | |
26 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
27 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
28 | * GNU General Public License for more details. | |
29 | * | |
30 | * You should have received a copy of the GNU General Public License | |
31 | * along with this program; if not, write to the Free Software | |
32 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
33 | * MA 02111-1307 USA | |
34 | */ | |
35 | ||
36 | #ifndef __CONFIG_H | |
37 | #define __CONFIG_H | |
38 | ||
39 | /* | |
40 | * High Level Configuration Options | |
41 | * (easy to change) | |
42 | */ | |
43 | #define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ | |
44 | ||
45 | #define LITTLEENDIAN 1 /* used by usb_ohci.c */ | |
46 | ||
47 | #define CONFIG_MMC 1 | |
48 | #define BOARD_LATE_INIT 1 | |
49 | ||
50 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ | |
51 | ||
52 | #define RTC | |
53 | ||
54 | /* | |
55 | * Size of malloc() pool | |
56 | */ | |
6d0f6bcf JCPV |
57 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
58 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ | |
5e5803e1 SB |
59 | |
60 | /* | |
61 | * Hardware drivers | |
62 | */ | |
63 | ||
64 | /* | |
65 | * select serial console configuration | |
66 | */ | |
67 | #define CONFIG_SERIAL_MULTI | |
68 | #define CONFIG_FFUART 1 /* we use FFUART on Conxs */ | |
69 | #define CONFIG_BTUART 1 /* we use BTUART on Conxs */ | |
70 | #define CONFIG_STUART 1 /* we use STUART on Conxs */ | |
71 | ||
72 | /* allow to overwrite serial and ethaddr */ | |
73 | #define CONFIG_ENV_OVERWRITE | |
74 | ||
75 | #define CONFIG_BAUDRATE 38400 | |
76 | ||
77 | #define CONFIG_DOS_PARTITION 1 | |
78 | ||
79 | /* | |
80 | * Command line configuration. | |
81 | */ | |
82 | #include <config_cmd_default.h> | |
83 | ||
84 | #define CONFIG_CMD_MMC | |
85 | #define CONFIG_CMD_FAT | |
86 | #define CONFIG_CMD_IMLS | |
87 | #define CONFIG_CMD_PING | |
88 | #define CONFIG_CMD_USB | |
89 | ||
90 | /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ | |
91 | ||
92 | #undef CONFIG_SHOW_BOOT_PROGRESS | |
93 | ||
94 | #define CONFIG_BOOTDELAY 3 | |
95 | #define CONFIG_SERVERIP 192.168.1.99 | |
96 | #define CONFIG_BOOTCOMMAND "run boot_flash" | |
97 | #define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ | |
98 | " rw root=/dev/ram initrd=0xa0800000,5m" | |
99 | ||
100 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
101 | "program_boot_mmc=" \ | |
102 | "mw.b 0xa0010000 0xff 0x20000; " \ | |
103 | "if mmcinit && " \ | |
104 | "fatload mmc 0 0xa0010000 u-boot.bin; " \ | |
105 | "then " \ | |
106 | "protect off 0x0 0x1ffff; " \ | |
107 | "erase 0x0 0x1ffff; " \ | |
108 | "cp.b 0xa0010000 0x0 0x20000; " \ | |
109 | "fi\0" \ | |
110 | "program_uzImage_mmc=" \ | |
111 | "mw.b 0xa0010000 0xff 0x180000; " \ | |
112 | "if mmcinit && " \ | |
113 | "fatload mmc 0 0xa0010000 uzImage; " \ | |
114 | "then " \ | |
115 | "protect off 0x40000 0x1bffff; " \ | |
116 | "erase 0x40000 0x1bffff; " \ | |
117 | "cp.b 0xa0010000 0x40000 0x180000; " \ | |
118 | "fi\0" \ | |
119 | "program_ramdisk_mmc=" \ | |
120 | "mw.b 0xa0010000 0xff 0x500000; " \ | |
121 | "if mmcinit && " \ | |
122 | "fatload mmc 0 0xa0010000 ramdisk.gz; " \ | |
123 | "then " \ | |
124 | "protect off 0x1c0000 0x6bffff; " \ | |
125 | "erase 0x1c0000 0x6bffff; " \ | |
126 | "cp.b 0xa0010000 0x1c0000 0x500000; " \ | |
127 | "fi\0" \ | |
128 | "boot_mmc=" \ | |
129 | "if mmcinit && " \ | |
130 | "fatload mmc 0 0xa0030000 uzImage && " \ | |
131 | "fatload mmc 0 0xa0800000 ramdisk.gz; " \ | |
132 | "then " \ | |
133 | "bootm 0xa0030000; " \ | |
134 | "fi\0" \ | |
135 | "boot_flash=" \ | |
136 | "cp.b 0x1c0000 0xa0800000 0x500000; " \ | |
137 | "bootm 0x40000\0" \ | |
138 | ||
139 | #define CONFIG_SETUP_MEMORY_TAGS 1 | |
140 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
141 | /* #define CONFIG_INITRD_TAG 1 */ | |
142 | ||
1b769881 | 143 | #if defined(CONFIG_CMD_KGDB) |
5e5803e1 SB |
144 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
145 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
146 | #endif | |
147 | ||
148 | /* | |
149 | * Miscellaneous configurable options | |
150 | */ | |
6d0f6bcf JCPV |
151 | #define CONFIG_SYS_HUSH_PARSER 1 |
152 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
5e5803e1 | 153 | |
6d0f6bcf JCPV |
154 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
155 | #ifdef CONFIG_SYS_HUSH_PARSER | |
156 | #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ | |
5e5803e1 | 157 | #else |
6d0f6bcf | 158 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
5e5803e1 | 159 | #endif |
6d0f6bcf JCPV |
160 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
161 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ | |
162 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
163 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
164 | #define CONFIG_SYS_DEVICE_NULLDEV 1 | |
5e5803e1 | 165 | |
6d0f6bcf JCPV |
166 | #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
167 | #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ | |
5e5803e1 | 168 | |
6d0f6bcf | 169 | #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
5e5803e1 | 170 | |
6d0f6bcf | 171 | #define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ |
5e5803e1 | 172 | |
6d0f6bcf JCPV |
173 | #define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |
174 | #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ | |
5e5803e1 SB |
175 | |
176 | /* valid baudrates */ | |
6d0f6bcf | 177 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
5e5803e1 | 178 | |
6d0f6bcf | 179 | #define CONFIG_SYS_MMC_BASE 0xF0000000 |
5e5803e1 SB |
180 | |
181 | /* | |
182 | * Stack sizes | |
183 | * | |
184 | * The stack sizes are set up in start.S using the settings below | |
185 | */ | |
186 | #define CONFIG_STACKSIZE (128*1024) /* regular stack */ | |
187 | #ifdef CONFIG_USE_IRQ | |
188 | #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ | |
189 | #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ | |
190 | #endif | |
191 | ||
192 | /* | |
193 | * Physical Memory Map | |
194 | */ | |
195 | #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ | |
196 | #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ | |
197 | #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ | |
198 | #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ | |
199 | #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ | |
200 | #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ | |
201 | #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ | |
202 | #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ | |
203 | #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ | |
204 | ||
205 | #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ | |
206 | ||
6d0f6bcf JCPV |
207 | #define CONFIG_SYS_DRAM_BASE 0xa0000000 |
208 | #define CONFIG_SYS_DRAM_SIZE 0x04000000 | |
5e5803e1 | 209 | |
6d0f6bcf | 210 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
5e5803e1 SB |
211 | |
212 | /* | |
213 | * GPIO settings | |
214 | */ | |
6d0f6bcf JCPV |
215 | #define CONFIG_SYS_GPSR0_VAL 0x00018000 |
216 | #define CONFIG_SYS_GPSR1_VAL 0x00000000 | |
217 | #define CONFIG_SYS_GPSR2_VAL 0x400dc000 | |
218 | #define CONFIG_SYS_GPSR3_VAL 0x00000000 | |
219 | #define CONFIG_SYS_GPCR0_VAL 0x00000000 | |
220 | #define CONFIG_SYS_GPCR1_VAL 0x00000000 | |
221 | #define CONFIG_SYS_GPCR2_VAL 0x00000000 | |
222 | #define CONFIG_SYS_GPCR3_VAL 0x00000000 | |
223 | #define CONFIG_SYS_GPDR0_VAL 0x00018000 | |
224 | #define CONFIG_SYS_GPDR1_VAL 0x00028801 | |
225 | #define CONFIG_SYS_GPDR2_VAL 0x520dc000 | |
226 | #define CONFIG_SYS_GPDR3_VAL 0x0001E000 | |
227 | #define CONFIG_SYS_GAFR0_L_VAL 0x801c0000 | |
228 | #define CONFIG_SYS_GAFR0_U_VAL 0x00000013 | |
229 | #define CONFIG_SYS_GAFR1_L_VAL 0x6990100A | |
230 | #define CONFIG_SYS_GAFR1_U_VAL 0x00000008 | |
231 | #define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 | |
232 | #define CONFIG_SYS_GAFR2_U_VAL 0x010900F2 | |
233 | #define CONFIG_SYS_GAFR3_L_VAL 0x54000003 | |
234 | #define CONFIG_SYS_GAFR3_U_VAL 0x00002401 | |
235 | #define CONFIG_SYS_GRER0_VAL 0x00000000 | |
236 | #define CONFIG_SYS_GRER1_VAL 0x00000000 | |
237 | #define CONFIG_SYS_GRER2_VAL 0x00000000 | |
238 | #define CONFIG_SYS_GRER3_VAL 0x00000000 | |
239 | #define CONFIG_SYS_GFER0_VAL 0x00000000 | |
240 | #define CONFIG_SYS_GFER1_VAL 0x00000000 | |
241 | #define CONFIG_SYS_GFER2_VAL 0x00000000 | |
242 | #define CONFIG_SYS_GFER3_VAL 0x00000020 | |
243 | ||
244 | ||
245 | #define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */ | |
5e5803e1 SB |
246 | |
247 | /* | |
248 | * Clock settings | |
249 | */ | |
6d0f6bcf JCPV |
250 | #define CONFIG_SYS_CKEN 0x01FFFFFF /* CHECK */ |
251 | #define CONFIG_SYS_CCCR 0x02000290 /* 520Mhz */ | |
5e5803e1 SB |
252 | |
253 | /* | |
254 | * Memory settings | |
255 | */ | |
256 | ||
6d0f6bcf JCPV |
257 | #define CONFIG_SYS_MSC0_VAL 0x4df84df0 |
258 | #define CONFIG_SYS_MSC1_VAL 0x7ff87ff4 | |
259 | #define CONFIG_SYS_MSC2_VAL 0xa26936d4 | |
260 | #define CONFIG_SYS_MDCNFG_VAL 0x880009C9 | |
261 | #define CONFIG_SYS_MDREFR_VAL 0x20ca201e | |
262 | #define CONFIG_SYS_MDMRS_VAL 0x00220022 | |
5e5803e1 | 263 | |
6d0f6bcf JCPV |
264 | #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 |
265 | #define CONFIG_SYS_SXCNFG_VAL 0x40044004 | |
5e5803e1 SB |
266 | |
267 | /* | |
268 | * PCMCIA and CF Interfaces | |
269 | */ | |
6d0f6bcf JCPV |
270 | #define CONFIG_SYS_MECR_VAL 0x00000001 |
271 | #define CONFIG_SYS_MCMEM0_VAL 0x00004204 | |
272 | #define CONFIG_SYS_MCMEM1_VAL 0x00010204 | |
273 | #define CONFIG_SYS_MCATT0_VAL 0x00010504 | |
274 | #define CONFIG_SYS_MCATT1_VAL 0x00010504 | |
275 | #define CONFIG_SYS_MCIO0_VAL 0x00008407 | |
276 | #define CONFIG_SYS_MCIO1_VAL 0x0000c108 | |
5e5803e1 | 277 | |
5e5803e1 SB |
278 | #define CONFIG_DRIVER_DM9000 1 |
279 | #define CONFIG_DM9000_BASE 0x08000000 | |
280 | #define DM9000_IO CONFIG_DM9000_BASE | |
281 | #define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) | |
5e5803e1 SB |
282 | |
283 | #define CONFIG_USB_OHCI_NEW 1 | |
6d0f6bcf JCPV |
284 | #define CONFIG_SYS_USB_OHCI_BOARD_INIT 1 |
285 | #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 | |
286 | #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 | |
287 | #define CONFIG_SYS_USB_OHCI_SLOT_NAME "trizepsiv" | |
5e5803e1 | 288 | #define CONFIG_USB_STORAGE 1 |
6d0f6bcf | 289 | #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 |
5e5803e1 SB |
290 | |
291 | /* | |
292 | * FLASH and environment organization | |
293 | */ | |
294 | ||
6d0f6bcf | 295 | #define CONFIG_SYS_FLASH_CFI |
00b1883a | 296 | #define CONFIG_FLASH_CFI_DRIVER 1 |
5e5803e1 | 297 | |
6d0f6bcf JCPV |
298 | #define CONFIG_SYS_MONITOR_BASE 0 |
299 | #define CONFIG_SYS_MONITOR_LEN 0x40000 | |
5e5803e1 | 300 | |
6d0f6bcf JCPV |
301 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
302 | #define CONFIG_SYS_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ | |
5e5803e1 SB |
303 | |
304 | /* timeout values are in ticks */ | |
6d0f6bcf JCPV |
305 | #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
306 | #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ | |
5e5803e1 SB |
307 | |
308 | /* write flash less slowly */ | |
6d0f6bcf | 309 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
5e5803e1 SB |
310 | |
311 | /* Flash environment locations */ | |
5a1aceb0 | 312 | #define CONFIG_ENV_IS_IN_FLASH 1 |
6d0f6bcf | 313 | #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector */ |
0e8d1586 JCPV |
314 | #define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment */ |
315 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ | |
5e5803e1 SB |
316 | |
317 | /* Address and size of Redundant Environment Sector */ | |
0e8d1586 JCPV |
318 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE) |
319 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
5e5803e1 SB |
320 | |
321 | #endif /* __CONFIG_H */ |