[people/ms/u-boot.git] / include / configs / vf610twr.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale Vybrid vf610twr board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>
#include <config_cmd_default.h>

#define CONFIG_VF610

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE		4146

#define CONFIG_SKIP_LOWLEVEL_INIT

/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_FSL_LPUART
#define LPUART_BASE			UART1_BASE

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_UART_PORT		(1)
#define CONFIG_BAUDRATE			115200

#undef CONFIG_CMD_IMLS

#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

/* QSPI Configs*/
#define CONFIG_FSL_QSPI

#ifdef CONFIG_FSL_QSPI
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SPANSION
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SYS_FSL_QSPI_LE
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_SPD_BUS_NUM		0

#define CONFIG_BOOTDELAY		3

#define CONFIG_LOADADDR			0x82000000
#define CONFIG_SYS_TEXT_BASE		0x3f008000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttyLP1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=vf610-twr.dtb\0" \
	"fdt_addr=0x81000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#endif
Commit	Line	Data
8c653124 AW	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale Vybrid vf610twr board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
8c653124 AW	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <config_cmd_default.h>
	14
	15	#define CONFIG_VF610
	16
	17	#define CONFIG_DISPLAY_CPUINFO
	18	#define CONFIG_DISPLAY_BOARDINFO
	19
	20	#define CONFIG_MACH_TYPE 4146
	21
	22	#define CONFIG_SKIP_LOWLEVEL_INIT
	23
	24	/* Enable passing of ATAGs */
	25	#define CONFIG_CMDLINE_TAG
	26
	27	#define CONFIG_CMD_FUSE
	28	#ifdef CONFIG_CMD_FUSE
	29	#define CONFIG_MXC_OCOTP
	30	#endif
	31
	32	/* Size of malloc() pool */
	33	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	34
	35	#define CONFIG_BOARD_EARLY_INIT_F
	36
	37	#define CONFIG_FSL_LPUART
	38	#define LPUART_BASE UART1_BASE
	39
	40	/* Allow to overwrite serial and ethaddr */
	41	#define CONFIG_ENV_OVERWRITE
	42	#define CONFIG_SYS_UART_PORT (1)
	43	#define CONFIG_BAUDRATE 115200
	44
	45	#undef CONFIG_CMD_IMLS
	46
	47	#define CONFIG_MMC
	48	#define CONFIG_FSL_ESDHC
	49	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	50	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	51
	52	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
	53
	54	#define CONFIG_CMD_MMC
	55	#define CONFIG_GENERIC_MMC
	56	#define CONFIG_CMD_FAT
	57	#define CONFIG_DOS_PARTITION
	58
	59	#define CONFIG_CMD_PING
	60	#define CONFIG_CMD_DHCP
	61	#define CONFIG_CMD_MII
	62	#define CONFIG_CMD_NET
	63	#define CONFIG_FEC_MXC
	64	#define CONFIG_MII
	65	#define IMX_FEC_BASE ENET_BASE_ADDR
	66	#define CONFIG_FEC_XCV_TYPE RMII
	67	#define CONFIG_FEC_MXC_PHYADDR 0
	68	#define CONFIG_PHYLIB
	69	#define CONFIG_PHY_MICREL
	70
cb6d04d6 CF	71	/* QSPI Configs*/
	72	#define CONFIG_FSL_QSPI
	73
	74	#ifdef CONFIG_FSL_QSPI
	75	#define CONFIG_CMD_SF
	76	#define CONFIG_SPI_FLASH
	77	#define CONFIG_SPI_FLASH_SPANSION
	78	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	79	#define FSL_QSPI_FLASH_NUM 2
	80	#define CONFIG_SYS_FSL_QSPI_LE
	81	#endif
	82
1221b3d7 AW	83	/* I2C Configs */
1221b3d7 AW	84	#define CONFIG_CMD_I2C
b089d039	85	#define CONFIG_SYS_I2C
	86	#define CONFIG_SYS_I2C_MXC
	87	#define CONFIG_SYS_SPD_BUS_NUM 0
1221b3d7	88
8c653124 AW	89	#define CONFIG_BOOTDELAY 3
8c653124 AW	90
ca21f61e	91	#define CONFIG_LOADADDR 0x82000000
8c653124 AW	92	#define CONFIG_SYS_TEXT_BASE 0x3f008000
8c653124 AW	93
ca21f61e OS	94	#define CONFIG_EXTRA_ENV_SETTINGS \
ca21f61e OS	95	"script=boot.scr\0" \
c0a5b081	96	"image=zImage\0" \
ca21f61e OS	97	"console=ttyLP1\0" \
	98	"fdt_high=0xffffffff\0" \
	99	"initrd_high=0xffffffff\0" \
	100	"fdt_file=vf610-twr.dtb\0" \
	101	"fdt_addr=0x81000000\0" \
	102	"boot_fdt=try\0" \
	103	"ip_dyn=yes\0" \
	104	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	105	"mmcpart=1\0" \
	106	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	107	"update_sd_firmware_filename=u-boot.imx\0" \
	108	"update_sd_firmware=" \
	109	"if test ${ip_dyn} = yes; then " \
	110	"setenv get_cmd dhcp; " \
	111	"else " \
	112	"setenv get_cmd tftp; " \
	113	"fi; " \
	114	"if mmc dev ${mmcdev}; then " \
	115	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	116	"setexpr fw_sz ${filesize} / 0x200; " \
	117	"setexpr fw_sz ${fw_sz} + 1; " \
	118	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	119	"fi; " \
	120	"fi\0" \
	121	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	122	"root=${mmcroot}\0" \
	123	"loadbootscript=" \
	124	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	125	"bootscript=echo Running bootscript from mmc ...; " \
	126	"source\0" \
c0a5b081	127	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
ca21f61e OS	128	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	129	"mmcboot=echo Booting from mmc ...; " \
	130	"run mmcargs; " \
	131	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	132	"if run loadfdt; then " \
c0a5b081	133	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	134	"else " \
ca21f61e OS	135	"if test ${boot_fdt} = try; then " \
c0a5b081	136	"bootz; " \
ca21f61e OS	137	"else " \
	138	"echo WARN: Cannot load the DT; " \
	139	"fi; " \
	140	"fi; " \
	141	"else " \
c0a5b081	142	"bootz; " \
ca21f61e OS	143	"fi;\0" \
	144	"netargs=setenv bootargs console=${console},${baudrate} " \
	145	"root=/dev/nfs " \
	146	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	147	"netboot=echo Booting from net ...; " \
	148	"run netargs; " \
	149	"if test ${ip_dyn} = yes; then " \
	150	"setenv get_cmd dhcp; " \
	151	"else " \
	152	"setenv get_cmd tftp; " \
	153	"fi; " \
c0a5b081	154	"${get_cmd} ${image}; " \
ca21f61e OS	155	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
ca21f61e OS	156	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
c0a5b081	157	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	158	"else " \
ca21f61e OS	159	"if test ${boot_fdt} = try; then " \
c0a5b081	160	"bootz; " \
ca21f61e OS	161	"else " \
	162	"echo WARN: Cannot load the DT; " \
	163	"fi; " \
	164	"fi; " \
	165	"else " \
c0a5b081	166	"bootz; " \
ca21f61e OS	167	"fi;\0"
	168
	169	#define CONFIG_BOOTCOMMAND \
	170	"mmc dev ${mmcdev}; if mmc rescan; then " \
	171	"if run loadbootscript; then " \
	172	"run bootscript; " \
	173	"else " \
c0a5b081	174	"if run loadimage; then " \
ca21f61e OS	175	"run mmcboot; " \
	176	"else run netboot; " \
	177	"fi; " \
	178	"fi; " \
	179	"else run netboot; fi"
	180
8c653124 AW	181	/* Miscellaneous configurable options */
	182	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	183	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	184	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
8c653124 AW	185	#undef CONFIG_AUTO_COMPLETE
	186	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	187	#define CONFIG_SYS_PBSIZE \
	188	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	189	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	190	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	191
	192	#define CONFIG_CMD_MEMTEST
	193	#define CONFIG_SYS_MEMTEST_START 0x80010000
	194	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	195
ca21f61e	196	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
8c653124 AW	197
	198	/*
	199	* Stack sizes
	200	* The stack sizes are set up in start.S using the settings below
	201	*/
	202	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	203
	204	/* Physical memory map */
	205	#define CONFIG_NR_DRAM_BANKS 1
	206	#define PHYS_SDRAM (0x80000000)
	207	#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
	208
	209	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	210	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	211	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	212
	213	#define CONFIG_SYS_INIT_SP_OFFSET \
	214	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	215	#define CONFIG_SYS_INIT_SP_ADDR \
	216	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	217
	218	/* FLASH and environment organization */
	219	#define CONFIG_SYS_NO_FLASH
	220
	221	#define CONFIG_ENV_SIZE (8 * 1024)
	222	#define CONFIG_ENV_IS_IN_MMC
	223
	224	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	225	#define CONFIG_SYS_MMC_ENV_DEV 0
	226
	227	#define CONFIG_OF_LIBFDT
	228	#define CONFIG_CMD_BOOTZ
	229
	230	#endif