[people/ms/u-boot.git] / include / configs / wandboard.h

/*
 * Copyright (C) 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Wandboard.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"

#define MACH_TYPE_WANDBOARD		4412
#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0

/* Ethernet Configuration */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"splashpos=m,m\0" \
	"fdtfile=undefined\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}; run videoargs\0" \
	"videoargs=" \
		"setenv nextcon 0; " \
		"if hdmidet; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
					"if=RGB24; " \
			"setenv fbmen fbmem=28M; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo - no HDMI monitor;" \
		"fi; " \
		"i2c dev 1; " \
		"if i2c probe 0x10; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
					"if=RGB666,bpp=32; " \
			"if test 0 -eq ${nextcon}; then " \
				"setenv fbmem fbmem=10M; " \
			"else " \
				"setenv fbmem ${fbmem},10M; " \
			"fi; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
		"fi; " \
		"setenv bootargs ${bootargs} ${fbmem}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \

#define CONFIG_BOOTCOMMAND \
	   "run findfdt; " \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif			       /* __CONFIG_H * */
Commit	Line	Data
e2d282a1 FE	1	/*
	2	* Copyright (C) 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Wandboard.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
e2d282a1 FE	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
02824dc7	12	#include "mx6_common.h"
e2d282a1	13
0d1ea052 FE	14	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	15	#define CONFIG_SPL_MMC_SUPPORT
	16	#include "imx6_spl.h"
	17
e2d282a1 FE	18	#define MACH_TYPE_WANDBOARD 4412
	19	#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
	20
e2d282a1	21	/* Size of malloc() pool */
7bcb983f	22	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
e2d282a1 FE	23
e2d282a1 FE	24	#define CONFIG_BOARD_EARLY_INIT_F
eaffaa2d	25	#define CONFIG_BOARD_LATE_INIT
e2d282a1 FE	26
	27	#define CONFIG_MXC_UART
	28	#define CONFIG_MXC_UART_BASE UART1_BASE
	29
e2d282a1	30	/* Command definition */
eaffaa2d	31	#define CONFIG_CMD_BMODE
0798d578	32
e2d282a1 FE	33	#define CONFIG_SYS_MEMTEST_START 0x10000000
e2d282a1 FE	34	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
e2d282a1	35
8bc7c487 OS	36	/* I2C Configs */
	37	#define CONFIG_CMD_I2C
	38	#define CONFIG_SYS_I2C
	39	#define CONFIG_SYS_I2C_MXC
f8cb101e	40	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
8bc7c487 OS	41	#define CONFIG_SYS_I2C_SPEED 100000
8bc7c487 OS	42
e2d282a1	43	/* MMC Configuration */
5ed15738	44	#define CONFIG_SYS_FSL_USDHC_NUM 2
e2d282a1	45	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
e2d282a1	46
9df47577 JH	47	/* USB Configs */
	48	#define CONFIG_CMD_USB
	49	#define CONFIG_USB_EHCI
	50	#define CONFIG_USB_EHCI_MX6
	51	#define CONFIG_USB_STORAGE
	52	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	53	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	54	#define CONFIG_MXC_USB_FLAGS 0
	55
e2d282a1 FE	56	/* Ethernet Configuration */
	57	#define CONFIG_CMD_PING
	58	#define CONFIG_CMD_DHCP
	59	#define CONFIG_CMD_MII
e2d282a1 FE	60	#define CONFIG_FEC_MXC
	61	#define CONFIG_MII
	62	#define IMX_FEC_BASE ENET_BASE_ADDR
	63	#define CONFIG_FEC_XCV_TYPE RGMII
	64	#define CONFIG_ETHPRIME "FEC"
	65	#define CONFIG_FEC_MXC_PHYADDR 1
	66	#define CONFIG_PHYLIB
	67	#define CONFIG_PHY_ATHEROS
	68
7bcb983f FE	69	/* Framebuffer */
	70	#define CONFIG_VIDEO
	71	#define CONFIG_VIDEO_IPUV3
	72	#define CONFIG_CFB_CONSOLE
	73	#define CONFIG_VGA_AS_SINGLE_DEVICE
	74	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	75	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	76	#define CONFIG_VIDEO_BMP_RLE8
	77	#define CONFIG_SPLASH_SCREEN
a7efb026	78	#define CONFIG_SPLASH_SCREEN_ALIGN
7bcb983f FE	79	#define CONFIG_BMP_16BPP
7bcb983f FE	80	#define CONFIG_VIDEO_LOGO
a7efb026	81	#define CONFIG_VIDEO_BMP_LOGO
7bcb983f	82	#define CONFIG_IPUV3_CLK 260000000
0ef797a5	83	#define CONFIG_CMD_HDMIDETECT
5ea7f0e3	84	#define CONFIG_IMX_HDMI
8bc7c487	85	#define CONFIG_IMX_VIDEO_SKIP
7bcb983f	86
9f87640c FE	87	#define CONFIG_CMD_FUSE
	88	#ifdef CONFIG_CMD_FUSE
	89	#define CONFIG_MXC_OCOTP
	90	#endif
	91
0d1ea052	92	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
e2d282a1 FE	93	#define CONFIG_EXTRA_ENV_SETTINGS \
e2d282a1 FE	94	"script=boot.scr\0" \
f3533970	95	"image=zImage\0" \
e2d282a1	96	"console=ttymxc0\0" \
d727ab3c	97	"splashpos=m,m\0" \
0d1ea052	98	"fdtfile=undefined\0" \
e2d282a1 FE	99	"fdt_high=0xffffffff\0" \
e2d282a1 FE	100	"initrd_high=0xffffffff\0" \
6584a1b5	101	"fdt_addr=0x18000000\0" \
e2d282a1 FE	102	"boot_fdt=try\0" \
e2d282a1 FE	103	"ip_dyn=yes\0" \
1e1cbde0	104	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
86812c4d OS	105	"mmcpart=1\0" \
86812c4d OS	106	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
0798d578 OS	107	"update_sd_firmware_filename=u-boot.imx\0" \
	108	"update_sd_firmware=" \
	109	"if test ${ip_dyn} = yes; then " \
	110	"setenv get_cmd dhcp; " \
	111	"else " \
	112	"setenv get_cmd tftp; " \
	113	"fi; " \
	114	"if mmc dev ${mmcdev}; then " \
	115	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	116	"setexpr fw_sz ${filesize} / 0x200; " \
	117	"setexpr fw_sz ${fw_sz} + 1; " \
	118	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	119	"fi; " \
	120	"fi\0" \
e2d282a1	121	"mmcargs=setenv bootargs console=${console},${baudrate} " \
0ef797a5 OS	122	"root=${mmcroot}; run videoargs\0" \
	123	"videoargs=" \
	124	"setenv nextcon 0; " \
	125	"if hdmidet; then " \
	126	"setenv bootargs ${bootargs} " \
	127	"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
	128	"if=RGB24; " \
	129	"setenv fbmen fbmem=28M; " \
	130	"setexpr nextcon ${nextcon} + 1; " \
	131	"else " \
	132	"echo - no HDMI monitor;" \
	133	"fi; " \
	134	"i2c dev 1; " \
	135	"if i2c probe 0x10; then " \
	136	"setenv bootargs ${bootargs} " \
	137	"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
99c618ff	138	"if=RGB666,bpp=32; " \
0ef797a5 OS	139	"if test 0 -eq ${nextcon}; then " \
	140	"setenv fbmem fbmem=10M; " \
	141	"else " \
	142	"setenv fbmem ${fbmem},10M; " \
	143	"fi; " \
	144	"setexpr nextcon ${nextcon} + 1; " \
	145	"else " \
	146	"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
	147	"fi; " \
	148	"setenv bootargs ${bootargs} ${fbmem}\0" \
e2d282a1 FE	149	"loadbootscript=" \
	150	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	151	"bootscript=echo Running bootscript from mmc ...; " \
	152	"source\0" \
f3533970	153	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
0d1ea052	154	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
e2d282a1 FE	155	"mmcboot=echo Booting from mmc ...; " \
	156	"run mmcargs; " \
	157	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	158	"if run loadfdt; then " \
f3533970	159	"bootz ${loadaddr} - ${fdt_addr}; " \
e2d282a1 FE	160	"else " \
e2d282a1 FE	161	"if test ${boot_fdt} = try; then " \
f3533970	162	"bootz; " \
e2d282a1 FE	163	"else " \
	164	"echo WARN: Cannot load the DT; " \
	165	"fi; " \
	166	"fi; " \
	167	"else " \
f3533970	168	"bootz; " \
e2d282a1 FE	169	"fi;\0" \
	170	"netargs=setenv bootargs console=${console},${baudrate} " \
	171	"root=/dev/nfs " \
	172	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	173	"netboot=echo Booting from net ...; " \
	174	"run netargs; " \
	175	"if test ${ip_dyn} = yes; then " \
	176	"setenv get_cmd dhcp; " \
	177	"else " \
	178	"setenv get_cmd tftp; " \
	179	"fi; " \
f3533970	180	"${get_cmd} ${image}; " \
e2d282a1	181	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
0d1ea052	182	"if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
f3533970	183	"bootz ${loadaddr} - ${fdt_addr}; " \
e2d282a1 FE	184	"else " \
e2d282a1 FE	185	"if test ${boot_fdt} = try; then " \
f3533970	186	"bootz; " \
e2d282a1 FE	187	"else " \
	188	"echo WARN: Cannot load the DT; " \
	189	"fi; " \
	190	"fi; " \
	191	"else " \
f3533970	192	"bootz; " \
0d1ea052 FE	193	"fi;\0" \
0d1ea052 FE	194	"findfdt="\
9a8804a8	195	"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
0d1ea052	196	"setenv fdtfile imx6q-wandboard.dtb; fi; " \
9a8804a8	197	"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
0d1ea052	198	"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
9a8804a8 FE	199	"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
	200	"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
	201	"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
	202	"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
0d1ea052 FE	203	"if test $fdtfile = undefined; then " \
0d1ea052 FE	204	"echo WARNING: Could not determine dtb to use; fi; \0" \
e2d282a1 FE	205
e2d282a1 FE	206	#define CONFIG_BOOTCOMMAND \
0d1ea052	207	"run findfdt; " \
e2d282a1 FE	208	"mmc dev ${mmcdev}; if mmc rescan; then " \
	209	"if run loadbootscript; then " \
	210	"run bootscript; " \
	211	"else " \
f3533970	212	"if run loadimage; then " \
e2d282a1 FE	213	"run mmcboot; " \
	214	"else run netboot; " \
	215	"fi; " \
	216	"fi; " \
	217	"else run netboot; fi"
	218
e2d282a1 FE	219	/* Physical Memory Map */
	220	#define CONFIG_NR_DRAM_BANKS 1
	221	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	222
	223	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	224	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	225	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	226
	227	#define CONFIG_SYS_INIT_SP_OFFSET \
	228	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	229	#define CONFIG_SYS_INIT_SP_ADDR \
	230	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	231
056845c2	232	/* Environment organization */
e2d282a1 FE	233	#define CONFIG_ENV_SIZE (8 * 1024)
	234
	235	#define CONFIG_ENV_IS_IN_MMC
	236	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	237	#define CONFIG_SYS_MMC_ENV_DEV 0
	238
e2d282a1	239	#endif /* __CONFIG_H * */