[people/ms/u-boot.git] / include / configs / xilinx-ppc440.h

/*
 * (C) Copyright 2008
 *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
 *  This work has been supported by: QTechnology  http://qtec.com/
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef __CONFIG_GEN_H
#define __CONFIG_GEN_H
/*
#define DEBUG
#define ET_DEBUG
*/
 /*CPU*/
#define CONFIG_XILINX_440	1
#define CONFIG_440		1
#define CONFIG_4xx		1

/*Mem Map*/
#define CONFIG_SYS_SDRAM_BASE		0x0
#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)

/*Uart*/
#define CONFIG_XILINX_UARTLITE
#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
#define CONFIG_SYS_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR

/*Cmd*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
#undef CONFIG_CMD_SPI
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_DTT
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_IMLS

/*Misc*/
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds     */
#define CONFIG_SYS_LONGHELP			/* undef to save memory         */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on           */
#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address       */
#define CONFIG_SYS_EXTBDINFO		1	/* Extended board_into (bd_t) */
#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING		/* add command line history     */
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
#define CONFIG_LOOPW			/* enable loopw command         */
#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE		/* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup */
#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser          */
#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_LOADS_ECHO		/* echo on for serial download  */
#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change        */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */

/*Stack*/
#define CONFIG_SYS_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM  */
#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data   */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
/*Speed*/
#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ

/*Flash*/
#define	CONFIG_SYS_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
#define	CONFIG_SYS_FLASH_CFI		1
#define	CONFIG_FLASH_CFI_DRIVER	1
#define	CONFIG_SYS_FLASH_EMPTY_INFO	1
#define	CONFIG_SYS_MAX_FLASH_BANKS	1
#define	CONFIG_SYS_FLASH_PROTECTION

#endif						/* __CONFIG_H */
Commit	Line	Data
e07f4a80 RR	1	/*
	2	* (C) Copyright 2008
	3	* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
	4	* This work has been supported by: QTechnology http://qtec.com/
	5	* This program is free software: you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License as published by
	7	* the Free Software Foundation, either version 2 of the License, or
	8	* (at your option) any later version.
	9	*
	10	* This program is distributed in the hope that it will be useful,
	11	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	* GNU General Public License for more details.
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	16	*/
	17
	18	#ifndef __CONFIG_GEN_H
	19	#define __CONFIG_GEN_H
	20	/*
	21	#define DEBUG
	22	#define ET_DEBUG
	23	*/
	24	/CPU/
	25	#define CONFIG_XILINX_440 1
	26	#define CONFIG_440 1
	27	#define CONFIG_4xx 1
	28
	29	/Mem Map/
6d0f6bcf JCPV	30	#define CONFIG_SYS_SDRAM_BASE 0x0
	31	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	32	#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
	33	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
e07f4a80 RR	34
	35	/Uart/
	36	#define CONFIG_XILINX_UARTLITE
	37	#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
6d0f6bcf	38	#define CONFIG_SYS_BAUDRATE_TABLE { XPAR_UARTLITE_0_BAUDRATE }
e07f4a80 RR	39	#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR
	40
	41	/Cmd/
	42	#include <config_cmd_default.h>
	43	#define CONFIG_CMD_ASKENV
	44	#define CONFIG_CMD_CACHE
	45	#define CONFIG_CMD_DIAG
	46	#define CONFIG_CMD_ELF
	47	#define CONFIG_CMD_IRQ
	48	#define CONFIG_CMD_REGINFO
	49	#define CONFIG_CMD_JFFS2
	50	#define CONFIG_JFFS2_CMDLINE
	51	#undef CONFIG_CMD_SPI
	52	#undef CONFIG_CMD_I2C
	53	#undef CONFIG_CMD_DTT
	54	#undef CONFIG_CMD_NET
	55	#undef CONFIG_CMD_PING
	56	#undef CONFIG_CMD_DHCP
	57	#undef CONFIG_CMD_EEPROM
	58	#undef CONFIG_CMD_IMLS
	59
	60	/Misc/
	61	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
6d0f6bcf	62	#define CONFIG_SYS_LONGHELP /* undef to save memory */
e07f4a80	63	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	64	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e07f4a80	65	#else
6d0f6bcf	66	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
e07f4a80	67	#endif
6d0f6bcf JCPV	68	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	69	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	70	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	71	#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
	72	#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
	73	#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
	74	#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */
	75	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
e07f4a80 RR	76	#define CONFIG_CMDLINE_EDITING /* add command line history */
	77	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	78	#define CONFIG_LOOPW /* enable loopw command */
	79	#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
	80	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	81	#define CONFIG_VERSION_VARIABLE /* include version env variable */
6d0f6bcf JCPV	82	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
	83	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
	84	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
e07f4a80	85	#define CONFIG_LOADS_ECHO /* echo on for serial download */
6d0f6bcf JCPV	86	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
6d0f6bcf JCPV	87	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
e07f4a80 RR	88
e07f4a80 RR	89	/Stack/
6d0f6bcf JCPV	90	#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* Initial RAM address */
	91	#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
	92	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
	93	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	94	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
e07f4a80 RR	95	/Speed/
	96	#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
	97
	98	/Flash/
6d0f6bcf JCPV	99	#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
6d0f6bcf JCPV	100	#define CONFIG_SYS_FLASH_CFI 1
e07f4a80	101	#define CONFIG_FLASH_CFI_DRIVER 1
6d0f6bcf JCPV	102	#define CONFIG_SYS_FLASH_EMPTY_INFO 1
	103	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	104	#define CONFIG_SYS_FLASH_PROTECTION
e07f4a80 RR	105
e07f4a80 RR	106	#endif /* __CONFIG_H */