[people/ms/u-boot.git] / include / configs / zmx25.h

/*
 * (c) 2011 Graf-Syteco, Matthias Weisser
 * <weisserm@arcor.de>
 *
 * Configuation settings for the zmx25 board
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE		0xA0000000

#define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
/*
 * Environment settings
 */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"gs_fast_boot=setenv bootdelay 5\0" \
	"gs_slow_boot=setenv bootdelay 10\0" \
	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
		"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
		"bootm 0x81000000; bootelf 0x81000000\0"

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_BOARD_LATE_INIT

/*
 * Compressions
 */
#define CONFIG_LZO

/*
 * Hardware drivers
 */

/*
 * GPIO
 */
#define CONFIG_MXC_GPIO

/*
 * Serial
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONFIG_CONS_INDEX	1	/* use UART2 for console */
#define CONFIG_BAUDRATE		115200	/* Default baud rate */

/*
 * Ethernet
 */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR		0x00
#define CONFIG_MII

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#define CONFIG_CMD_NET
#define CONFIG_CMD_CACHE

/*
 * Additional command
 */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB

#define CONFIG_SYS_HUSH_PARSER

/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
#define CONFIG_USB_EHCI_MXC
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM		0x80000000	/* start address of LPDDRRAM */
#define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */

#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR	0x78020000	/* end of internal SRAM */

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		0xA0000000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	256

#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00040000)
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_SIZE			(128 * 1024)

/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* ~10x faster */

#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)

#define CONFIG_SYS_PROMPT	"zmx25> "
#define CONFIG_SYS_CBSIZE	256
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
				sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING

#define CONFIG_PREBOOT  ""

#define CONFIG_BOOTDELAY	5
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)

#endif	/* __CONFIG_H */
Commit	Line	Data
39f0023e MW	1	/*
	2	* (c) 2011 Graf-Syteco, Matthias Weisser
	3	* <weisserm@arcor.de>
	4	*
	5	* Configuation settings for the zmx25 board
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
39f0023e MW	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
	13	#define CONFIG_ARM926EJS /* arm926ejs CPU core */
	14	#define CONFIG_MX25
39f0023e MW	15	#define CONFIG_SYS_TEXT_BASE 0xA0000000
39f0023e MW	16
9ba24f17	17	#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
39f0023e MW	18	/*
	19	* Environment settings
	20	*/
	21	#define CONFIG_EXTRA_ENV_SETTINGS \
	22	"gs_fast_boot=setenv bootdelay 5\0" \
	23	"gs_slow_boot=setenv bootdelay 10\0" \
	24	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
	25	"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
	26	"bootm 0x81000000; bootelf 0x81000000\0"
	27
	28	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	29	#define CONFIG_SETUP_MEMORY_TAGS
	30	#define CONFIG_INITRD_TAG
9660e442	31	#define CONFIG_BOARD_LATE_INIT
39f0023e MW	32
	33	/*
	34	* Compressions
	35	*/
	36	#define CONFIG_LZO
	37
	38	/*
	39	* Hardware drivers
	40	*/
	41
	42	/*
	43	* GPIO
	44	*/
	45	#define CONFIG_MXC_GPIO
	46
	47	/*
	48	* Serial
	49	*/
	50	#define CONFIG_MXC_UART
40f6fffe	51	#define CONFIG_MXC_UART_BASE UART2_BASE
39f0023e MW	52	#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
39f0023e MW	53	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
39f0023e MW	54
	55	/*
	56	* Ethernet
	57	*/
	58	#define CONFIG_FEC_MXC
	59	#define CONFIG_FEC_MXC_PHYADDR 0x00
	60	#define CONFIG_MII
39f0023e MW	61
	62	/*
	63	* BOOTP options
	64	*/
	65	#define CONFIG_BOOTP_BOOTFILESIZE
	66	#define CONFIG_BOOTP_BOOTPATH
	67	#define CONFIG_BOOTP_GATEWAY
	68	#define CONFIG_BOOTP_HOSTNAME
	69
	70	/*
	71	* Command line configuration.
	72	*/
	73	#include <config_cmd_default.h>
	74	#define CONFIG_CMD_NET
	75	#define CONFIG_CMD_CACHE
	76
39f0023e MW	77	/*
	78	* Additional command
	79	*/
	80	#define CONFIG_CMD_DHCP
	81	#define CONFIG_CMD_PING
	82	#define CONFIG_CMD_ELF
	83	#define CONFIG_CMD_FAT
	84	#define CONFIG_CMD_USB
	85
	86	#define CONFIG_SYS_HUSH_PARSER
39f0023e MW	87
	88	/*
	89	* USB
	90	*/
	91	#ifdef CONFIG_CMD_USB
	92	#define CONFIG_USB_EHCI /* Enable EHCI USB support */
	93	#define CONFIG_USB_EHCI_MXC
	94	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
9fa3d093 BT	95	#define CONFIG_MXC_USB_PORT 1
	96	#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL
	97	#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY \| MXC_EHCI_IPPUE_DOWN)
39f0023e MW	98	#define CONFIG_EHCI_IS_TDI
	99	#define CONFIG_USB_STORAGE
	100	#define CONFIG_DOS_PARTITION
	101	#define CONFIG_SUPPORT_VFAT
	102	#endif /* CONFIG_CMD_USB */
	103
	104	/* SDRAM */
	105	#define CONFIG_NR_DRAM_BANKS 1
	106	#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */
	107	#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
	108
	109	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	110	#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */
	111
	112	/*
	113	* FLASH and environment organization
	114	*/
	115	#define CONFIG_SYS_FLASH_BASE 0xA0000000
	116	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	117	#define CONFIG_SYS_MAX_FLASH_SECT 256
	118
	119	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
	120	#define CONFIG_ENV_IS_IN_FLASH 1
	121	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	122	#define CONFIG_ENV_SIZE (128 * 1024)
	123
	124	/*
	125	* CFI FLASH driver setup
	126	*/
	127	#define CONFIG_SYS_FLASH_CFI
	128	#define CONFIG_FLASH_CFI_DRIVER
	129	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* ~10x faster */
	130
	131	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	132
	133	#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))
	134	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
	135
	136	#define CONFIG_SYS_PROMPT "zmx25> "
	137	#define CONFIG_SYS_CBSIZE 256
	138	#define CONFIG_SYS_MAXARGS 16
	139	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	140	sizeof(CONFIG_SYS_PROMPT) + 16)
	141	#define CONFIG_SYS_LONGHELP
	142	#define CONFIG_CMDLINE_EDITING
	143
	144	#define CONFIG_PREBOOT ""
	145
	146	#define CONFIG_BOOTDELAY 5
	147	#define CONFIG_AUTOBOOT_KEYED
	148	#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
	149	#define CONFIG_AUTOBOOT_DELAY_STR "delaygs"
	150	#define CONFIG_AUTOBOOT_STOP_STR "stopgs"
	151
	152	/*
	153	* Size of malloc() pool
	154	*/
	155	#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000)
39f0023e MW	156
39f0023e MW	157	#endif /* __CONFIG_H */