[people/ms/u-boot.git] / include / lcd.h

/*
 * MPC823 and PXA LCD Controller
 *
 * Modeled after video interface by Paolo Scaffardi
 *
 *
 * (C) Copyright 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _LCD_H_
#define _LCD_H_
#include <lcd_console.h>

extern char lcd_is_enabled;

extern int lcd_line_length;

extern struct vidinfo panel_info;

void lcd_ctrl_init(void *lcdbase);
void lcd_enable(void);

/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue);
void lcd_initcolregs(void);

/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,
			     void **alloc_addr);
int bmp_display(ulong addr, int x, int y);

/**
 * Set whether we need to flush the dcache when changing the LCD image. This
 * defaults to off.
 *
 * @param flush		non-zero to flush cache after update, 0 to skip
 */
void lcd_set_flush_dcache(int flush);

#if defined CONFIG_MPC823
/*
 * LCD controller stucture for MPC823 CPU
 */
typedef struct vidinfo {
	ushort	vl_col;		/* Number of columns (i.e. 640) */
	ushort	vl_row;		/* Number of rows (i.e. 480) */
	ushort	vl_width;	/* Width of display area in millimeters */
	ushort	vl_height;	/* Height of display area in millimeters */

	/* LCD configuration register */
	u_char	vl_clkp;	/* Clock polarity */
	u_char	vl_oep;		/* Output Enable polarity */
	u_char	vl_hsp;		/* Horizontal Sync polarity */
	u_char	vl_vsp;		/* Vertical Sync polarity */
	u_char	vl_dp;		/* Data polarity */
	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
	u_char	vl_tft;		/* 0 = passive, 1 = TFT */

	/* Horizontal control register. Timing from data sheet */
	ushort	vl_wbl;		/* Wait between lines */

	/* Vertical control register */
	u_char	vl_vpw;		/* Vertical sync pulse width */
	u_char	vl_lcdac;	/* LCD AC timing */
	u_char	vl_wbf;		/* Wait between frames */
} vidinfo_t;

#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
	defined CONFIG_CPU_MONAHANS
/*
 * PXA LCD DMA descriptor
 */
struct pxafb_dma_descriptor {
	u_long	fdadr;		/* Frame descriptor address register */
	u_long	fsadr;		/* Frame source address register */
	u_long	fidr;		/* Frame ID register */
	u_long	ldcmd;		/* Command register */
};

/*
 * PXA LCD info
 */
struct pxafb_info {

	/* Misc registers */
	u_long	reg_lccr3;
	u_long	reg_lccr2;
	u_long	reg_lccr1;
	u_long	reg_lccr0;
	u_long	fdadr0;
	u_long	fdadr1;

	/* DMA descriptors */
	struct	pxafb_dma_descriptor *	dmadesc_fblow;
	struct	pxafb_dma_descriptor *	dmadesc_fbhigh;
	struct	pxafb_dma_descriptor *	dmadesc_palette;

	u_long	screen;		/* physical address of frame buffer */
	u_long	palette;	/* physical address of palette memory */
	u_int	palette_size;
};

/*
 * LCD controller stucture for PXA CPU
 */
typedef struct vidinfo {
	ushort	vl_col;		/* Number of columns (i.e. 640) */
	ushort	vl_row;		/* Number of rows (i.e. 480) */
	ushort	vl_width;	/* Width of display area in millimeters */
	ushort	vl_height;	/* Height of display area in millimeters */

	/* LCD configuration register */
	u_char	vl_clkp;	/* Clock polarity */
	u_char	vl_oep;		/* Output Enable polarity */
	u_char	vl_hsp;		/* Horizontal Sync polarity */
	u_char	vl_vsp;		/* Vertical Sync polarity */
	u_char	vl_dp;		/* Data polarity */
	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
	u_char	vl_tft;		/* 0 = passive, 1 = TFT */

	/* Horizontal control register. Timing from data sheet */
	ushort	vl_hpw;		/* Horz sync pulse width */
	u_char	vl_blw;		/* Wait before of line */
	u_char	vl_elw;		/* Wait end of line */

	/* Vertical control register. */
	u_char	vl_vpw;		/* Vertical sync pulse width */
	u_char	vl_bfw;		/* Wait before of frame */
	u_char	vl_efw;		/* Wait end of frame */

	/* PXA LCD controller params */
	struct	pxafb_info pxa;
} vidinfo_t;

#elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)

typedef struct vidinfo {
	ushort vl_col;		/* Number of columns (i.e. 640) */
	ushort vl_row;		/* Number of rows (i.e. 480) */
	u_long vl_clk;	/* pixel clock in ps    */

	/* LCD configuration register */
	u_long vl_sync;		/* Horizontal / vertical sync */
	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
	u_long vl_tft;		/* 0 = passive, 1 = TFT */
	u_long vl_cont_pol_low;	/* contrast polarity is low */
	u_long vl_clk_pol;	/* clock polarity */

	/* Horizontal control register. */
	u_long vl_hsync_len;	/* Length of horizontal sync */
	u_long vl_left_margin;	/* Time from sync to picture */
	u_long vl_right_margin;	/* Time from picture to sync */

	/* Vertical control register. */
	u_long vl_vsync_len;	/* Length of vertical sync */
	u_long vl_upper_margin;	/* Time from sync to picture */
	u_long vl_lower_margin;	/* Time from picture to sync */

	u_long	mmio;		/* Memory mapped registers */
} vidinfo_t;

#elif defined(CONFIG_EXYNOS_FB)

enum {
	FIMD_RGB_INTERFACE = 1,
	FIMD_CPU_INTERFACE = 2,
};

enum exynos_fb_rgb_mode_t {
	MODE_RGB_P = 0,
	MODE_BGR_P = 1,
	MODE_RGB_S = 2,
	MODE_BGR_S = 3,
};

typedef struct vidinfo {
	ushort vl_col;		/* Number of columns (i.e. 640) */
	ushort vl_row;		/* Number of rows (i.e. 480) */
	ushort vl_width;	/* Width of display area in millimeters */
	ushort vl_height;	/* Height of display area in millimeters */

	/* LCD configuration register */
	u_char vl_freq;		/* Frequency */
	u_char vl_clkp;		/* Clock polarity */
	u_char vl_oep;		/* Output Enable polarity */
	u_char vl_hsp;		/* Horizontal Sync polarity */
	u_char vl_vsp;		/* Vertical Sync polarity */
	u_char vl_dp;		/* Data polarity */
	u_char vl_bpix;		/* Bits per pixel */

	/* Horizontal control register. Timing from data sheet */
	u_char vl_hspw;		/* Horz sync pulse width */
	u_char vl_hfpd;		/* Wait before of line */
	u_char vl_hbpd;		/* Wait end of line */

	/* Vertical control register. */
	u_char	vl_vspw;	/* Vertical sync pulse width */
	u_char	vl_vfpd;	/* Wait before of frame */
	u_char	vl_vbpd;	/* Wait end of frame */
	u_char  vl_cmd_allow_len; /* Wait end of frame */

	unsigned int win_id;
	unsigned int init_delay;
	unsigned int power_on_delay;
	unsigned int reset_delay;
	unsigned int interface_mode;
	unsigned int mipi_enabled;
	unsigned int dp_enabled;
	unsigned int cs_setup;
	unsigned int wr_setup;
	unsigned int wr_act;
	unsigned int wr_hold;
	unsigned int logo_on;
	unsigned int logo_width;
	unsigned int logo_height;
	int logo_x_offset;
	int logo_y_offset;
	unsigned long logo_addr;
	unsigned int rgb_mode;
	unsigned int resolution;

	/* parent clock name(MPLL, EPLL or VPLL) */
	unsigned int pclk_name;
	/* ratio value for source clock from parent clock. */
	unsigned int sclk_div;

	unsigned int dual_lcd_enabled;
} vidinfo_t;

void init_panel_info(vidinfo_t *vid);

#else

typedef struct vidinfo {
	ushort	vl_col;		/* Number of columns (i.e. 160) */
	ushort	vl_row;		/* Number of rows (i.e. 100) */

	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */

	ushort	*cmap;		/* Pointer to the colormap */

	void	*priv;		/* Pointer to driver-specific data */
} vidinfo_t;

#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */

extern vidinfo_t panel_info;

/* Video functions */

void	lcd_putc(const char c);
void	lcd_puts(const char *s);
void	lcd_printf(const char *fmt, ...);
void	lcd_clear(void);
int	lcd_display_bitmap(ulong bmp_image, int x, int y);

/**
 * Get the width of the LCD in pixels
 *
 * @return width of LCD in pixels
 */
int lcd_get_pixel_width(void);

/**
 * Get the height of the LCD in pixels
 *
 * @return height of LCD in pixels
 */
int lcd_get_pixel_height(void);

/**
 * Get the number of text lines/rows on the LCD
 *
 * @return number of rows
 */
int lcd_get_screen_rows(void);

/**
 * Get the number of text columns on the LCD
 *
 * @return number of columns
 */
int lcd_get_screen_columns(void);

/**
 * Get the background color of the LCD
 *
 * @return background color value
 */
int lcd_getbgcolor(void);

/**
 * Get the foreground color of the LCD
 *
 * @return foreground color value
 */
int lcd_getfgcolor(void);

/**
 * Set the position of the text cursor
 *
 * @param col	Column to place cursor (0 = left side)
 * @param row	Row to place cursor (0 = top line)
 */
void lcd_position_cursor(unsigned col, unsigned row);

/* Allow boards to customize the information displayed */
void lcd_show_board_info(void);

/* Return the size of the LCD frame buffer, and the line length */
int lcd_get_size(int *line_length);

int lcd_dt_simplefb_add_node(void *blob);
int lcd_dt_simplefb_enable_existing_node(void *blob);

/* Update the LCD / flush the cache */
void lcd_sync(void);

/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT						*/
/************************************************************************/
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
# include <bmp_layout.h>
# include <asm/byteorder.h>
#endif

/*
 *  Information about displays we are using. This is for configuring
 *  the LCD controller and memory allocation. Someone has to know what
 *  is connected, as we can't autodetect anything.
 */
#define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
#define CONFIG_SYS_LOW	1	/* Pins are active low			*/

#define LCD_MONOCHROME	0
#define LCD_COLOR2	1
#define LCD_COLOR4	2
#define LCD_COLOR8	3
#define LCD_COLOR16	4
#define LCD_COLOR32	5
/*----------------------------------------------------------------------*/
#if defined(CONFIG_LCD_INFO_BELOW_LOGO)
# define LCD_INFO_X		0
# define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
#elif defined(CONFIG_LCD_LOGO)
# define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
# define LCD_INFO_Y		VIDEO_FONT_HEIGHT
#else
# define LCD_INFO_X		VIDEO_FONT_WIDTH
# define LCD_INFO_Y		VIDEO_FONT_HEIGHT
#endif

/* Default to 8bpp if bit depth not specified */
#ifndef LCD_BPP
# define LCD_BPP			LCD_COLOR8
#endif
#ifndef LCD_DF
# define LCD_DF			1
#endif

/* Calculate nr. of bits per pixel  and nr. of colors */
#define NBITS(bit_code)		(1 << (bit_code))
#define NCOLORS(bit_code)	(1 << NBITS(bit_code))

/************************************************************************/
/* ** CONSOLE CONSTANTS							*/
/************************************************************************/
#if LCD_BPP == LCD_COLOR8

/*
 * 8bpp color definitions
 */
# define CONSOLE_COLOR_BLACK	0
# define CONSOLE_COLOR_RED	1
# define CONSOLE_COLOR_GREEN	2
# define CONSOLE_COLOR_YELLOW	3
# define CONSOLE_COLOR_BLUE	4
# define CONSOLE_COLOR_MAGENTA	5
# define CONSOLE_COLOR_CYAN	6
# define CONSOLE_COLOR_GREY	14
# define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest	*/

#elif LCD_BPP == LCD_COLOR32
/*
 * 32bpp color definitions
 */
# define CONSOLE_COLOR_RED	0x00ff0000
# define CONSOLE_COLOR_GREEN	0x0000ff00
# define CONSOLE_COLOR_YELLOW	0x00ffff00
# define CONSOLE_COLOR_BLUE	0x000000ff
# define CONSOLE_COLOR_MAGENTA	0x00ff00ff
# define CONSOLE_COLOR_CYAN	0x0000ffff
# define CONSOLE_COLOR_GREY	0x00aaaaaa
# define CONSOLE_COLOR_BLACK	0x00000000
# define CONSOLE_COLOR_WHITE	0x00ffffff	/* Must remain last / highest*/
# define NBYTES(bit_code)	(NBITS(bit_code) >> 3)

#else

/*
 * 16bpp color definitions
 */
# define CONSOLE_COLOR_BLACK	0x0000
# define CONSOLE_COLOR_WHITE	0xffff	/* Must remain last / highest	*/

#endif /* color definitions */

/************************************************************************/
#ifndef PAGE_SIZE
# define PAGE_SIZE	4096
#endif

/************************************************************************/

#endif	/* _LCD_H_ */
Commit	Line	Data
fe8c2806	1	/*
8655b6f8	2	* MPC823 and PXA LCD Controller
fe8c2806 WD	3	*
	4	* Modeled after video interface by Paolo Scaffardi
	5	*
	6	*
	7	* (C) Copyright 2001
	8	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
fe8c2806 WD	11	*/
	12
	13	#ifndef _LCD_H_
	14	#define _LCD_H_
904672ee	15	#include <lcd_console.h>
fe8c2806	16
682011ff WD	17	extern char lcd_is_enabled;
682011ff WD	18
8655b6f8	19	extern int lcd_line_length;
8655b6f8	20
6111722a AR	21	extern struct vidinfo panel_info;
6111722a AR	22
6b035141 JH	23	void lcd_ctrl_init(void *lcdbase);
6b035141 JH	24	void lcd_enable(void);
6111722a AR	25
6111722a AR	26	/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
6b035141 JH	27	void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue);
6b035141 JH	28	void lcd_initcolregs(void);
6111722a AR	29
6111722a AR	30	/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
f7ef9d61 PW	31	struct bmp_image gunzip_bmp(unsigned long addr, unsigned long lenp,
f7ef9d61 PW	32	void **alloc_addr);
6b035141	33	int bmp_display(ulong addr, int x, int y);
8655b6f8	34
9a8efc46 SG	35	/**
	36	* Set whether we need to flush the dcache when changing the LCD image. This
	37	* defaults to off.
	38	*
	39	* @param flush non-zero to flush cache after update, 0 to skip
	40	*/
	41	void lcd_set_flush_dcache(int flush);
	42
8655b6f8 WD	43	#if defined CONFIG_MPC823
	44	/*
	45	* LCD controller stucture for MPC823 CPU
	46	*/
	47	typedef struct vidinfo {
	48	ushort vl_col; /* Number of columns (i.e. 640) */
	49	ushort vl_row; /* Number of rows (i.e. 480) */
	50	ushort vl_width; /* Width of display area in millimeters */
	51	ushort vl_height; /* Height of display area in millimeters */
	52
	53	/* LCD configuration register */
	54	u_char vl_clkp; /* Clock polarity */
	55	u_char vl_oep; /* Output Enable polarity */
	56	u_char vl_hsp; /* Horizontal Sync polarity */
	57	u_char vl_vsp; /* Vertical Sync polarity */
	58	u_char vl_dp; /* Data polarity */
	59	u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
	60	u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
	61	u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
	62	u_char vl_clor; /* Color, 0 = mono, 1 = color */
	63	u_char vl_tft; /* 0 = passive, 1 = TFT */
	64
	65	/* Horizontal control register. Timing from data sheet */
	66	ushort vl_wbl; /* Wait between lines */
	67
	68	/* Vertical control register */
	69	u_char vl_vpw; /* Vertical sync pulse width */
	70	u_char vl_lcdac; /* LCD AC timing */
	71	u_char vl_wbf; /* Wait between frames */
	72	} vidinfo_t;
	73
abc20aba MV	74	#elif defined(CONFIG_CPU_PXA25X) \|\| defined(CONFIG_CPU_PXA27X) \|\| \
abc20aba MV	75	defined CONFIG_CPU_MONAHANS
8655b6f8 WD	76	/*
	77	* PXA LCD DMA descriptor
	78	*/
	79	struct pxafb_dma_descriptor {
	80	u_long fdadr; /* Frame descriptor address register */
	81	u_long fsadr; /* Frame source address register */
	82	u_long fidr; /* Frame ID register */
	83	u_long ldcmd; /* Command register */
	84	};
	85
	86	/*
	87	* PXA LCD info
	88	*/
	89	struct pxafb_info {
	90
	91	/* Misc registers */
	92	u_long reg_lccr3;
	93	u_long reg_lccr2;
	94	u_long reg_lccr1;
	95	u_long reg_lccr0;
	96	u_long fdadr0;
	97	u_long fdadr1;
	98
	99	/* DMA descriptors */
	100	struct pxafb_dma_descriptor * dmadesc_fblow;
	101	struct pxafb_dma_descriptor * dmadesc_fbhigh;
	102	struct pxafb_dma_descriptor * dmadesc_palette;
	103
	104	u_long screen; /* physical address of frame buffer */
	105	u_long palette; /* physical address of palette memory */
	106	u_int palette_size;
	107	};
	108
	109	/*
	110	* LCD controller stucture for PXA CPU
	111	*/
	112	typedef struct vidinfo {
	113	ushort vl_col; /* Number of columns (i.e. 640) */
	114	ushort vl_row; /* Number of rows (i.e. 480) */
	115	ushort vl_width; /* Width of display area in millimeters */
	116	ushort vl_height; /* Height of display area in millimeters */
	117
	118	/* LCD configuration register */
	119	u_char vl_clkp; /* Clock polarity */
	120	u_char vl_oep; /* Output Enable polarity */
	121	u_char vl_hsp; /* Horizontal Sync polarity */
	122	u_char vl_vsp; /* Vertical Sync polarity */
	123	u_char vl_dp; /* Data polarity */
	124	u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
	125	u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
	126	u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
	127	u_char vl_clor; /* Color, 0 = mono, 1 = color */
	128	u_char vl_tft; /* 0 = passive, 1 = TFT */
	129
	130	/* Horizontal control register. Timing from data sheet */
	131	ushort vl_hpw; /* Horz sync pulse width */
	132	u_char vl_blw; /* Wait before of line */
	133	u_char vl_elw; /* Wait end of line */
	134
	135	/* Vertical control register. */
	136	u_char vl_vpw; /* Vertical sync pulse width */
	137	u_char vl_bfw; /* Wait before of frame */
	138	u_char vl_efw; /* Wait end of frame */
	139
140	/* PXA LCD controller params */
141	struct pxafb_info pxa;
142	} vidinfo_t;
143
f6b690e6	144	#elif defined(CONFIG_ATMEL_LCD) \|\| defined(CONFIG_ATMEL_HLCD)
39cf4804 SP	145
39cf4804 SP	146	typedef struct vidinfo {
78459123 MV	147	ushort vl_col; /* Number of columns (i.e. 640) */
78459123 MV	148	ushort vl_row; /* Number of rows (i.e. 480) */
39cf4804 SP	149	u_long vl_clk; /* pixel clock in ps */
	150
	151	/* LCD configuration register */
	152	u_long vl_sync; /* Horizontal / vertical sync */
	153	u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
	154	u_long vl_tft; /* 0 = passive, 1 = TFT */
cdfcedbf	155	u_long vl_cont_pol_low; /* contrast polarity is low */
f6b690e6	156	u_long vl_clk_pol; /* clock polarity */
39cf4804 SP	157
	158	/* Horizontal control register. */
	159	u_long vl_hsync_len; /* Length of horizontal sync */
	160	u_long vl_left_margin; /* Time from sync to picture */
	161	u_long vl_right_margin; /* Time from picture to sync */
	162
	163	/* Vertical control register. */
	164	u_long vl_vsync_len; /* Length of vertical sync */
	165	u_long vl_upper_margin; /* Time from sync to picture */
	166	u_long vl_lower_margin; /* Time from picture to sync */
	167
	168	u_long mmio; /* Memory mapped registers */
	169	} vidinfo_t;
	170
559a05cc DL	171	#elif defined(CONFIG_EXYNOS_FB)
	172
	173	enum {
	174	FIMD_RGB_INTERFACE = 1,
	175	FIMD_CPU_INTERFACE = 2,
	176	};
	177
90464971 DL	178	enum exynos_fb_rgb_mode_t {
	179	MODE_RGB_P = 0,
	180	MODE_BGR_P = 1,
	181	MODE_RGB_S = 2,
	182	MODE_BGR_S = 3,
	183	};
	184
559a05cc DL	185	typedef struct vidinfo {
	186	ushort vl_col; /* Number of columns (i.e. 640) */
	187	ushort vl_row; /* Number of rows (i.e. 480) */
	188	ushort vl_width; /* Width of display area in millimeters */
	189	ushort vl_height; /* Height of display area in millimeters */
	190
	191	/* LCD configuration register */
	192	u_char vl_freq; /* Frequency */
	193	u_char vl_clkp; /* Clock polarity */
	194	u_char vl_oep; /* Output Enable polarity */
	195	u_char vl_hsp; /* Horizontal Sync polarity */
	196	u_char vl_vsp; /* Vertical Sync polarity */
	197	u_char vl_dp; /* Data polarity */
	198	u_char vl_bpix; /* Bits per pixel */
	199
	200	/* Horizontal control register. Timing from data sheet */
	201	u_char vl_hspw; /* Horz sync pulse width */
	202	u_char vl_hfpd; /* Wait before of line */
	203	u_char vl_hbpd; /* Wait end of line */
	204
	205	/* Vertical control register. */
	206	u_char vl_vspw; /* Vertical sync pulse width */
	207	u_char vl_vfpd; /* Wait before of frame */
	208	u_char vl_vbpd; /* Wait end of frame */
	209	u_char vl_cmd_allow_len; /* Wait end of frame */
	210
559a05cc DL	211	unsigned int win_id;
	212	unsigned int init_delay;
	213	unsigned int power_on_delay;
	214	unsigned int reset_delay;
	215	unsigned int interface_mode;
	216	unsigned int mipi_enabled;
5addfcfc	217	unsigned int dp_enabled;
559a05cc DL	218	unsigned int cs_setup;
	219	unsigned int wr_setup;
	220	unsigned int wr_act;
	221	unsigned int wr_hold;
90464971 DL	222	unsigned int logo_on;
	223	unsigned int logo_width;
	224	unsigned int logo_height;
903afe18 PM	225	int logo_x_offset;
903afe18 PM	226	int logo_y_offset;
90464971 DL	227	unsigned long logo_addr;
	228	unsigned int rgb_mode;
	229	unsigned int resolution;
559a05cc DL	230
	231	/* parent clock name(MPLL, EPLL or VPLL) */
	232	unsigned int pclk_name;
	233	/* ratio value for source clock from parent clock. */
	234	unsigned int sclk_div;
	235
	236	unsigned int dual_lcd_enabled;
559a05cc DL	237	} vidinfo_t;
	238
	239	void init_panel_info(vidinfo_t *vid);
	240
b245e65e GL	241	#else
	242
	243	typedef struct vidinfo {
	244	ushort vl_col; /* Number of columns (i.e. 160) */
	245	ushort vl_row; /* Number of rows (i.e. 100) */
	246
	247	u_char vl_bpix; /* Bits per pixel, 0 = 1 */
	248
	249	ushort cmap; / Pointer to the colormap */
	250
	251	void priv; / Pointer to driver-specific data */
	252	} vidinfo_t;
	253
ecfdcee5	254	#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
8655b6f8	255
60e97419 AR	256	extern vidinfo_t panel_info;
60e97419 AR	257
fe8c2806 WD	258	/* Video functions */
fe8c2806 WD	259
6b035141 JH	260	void lcd_putc(const char c);
	261	void lcd_puts(const char *s);
	262	void lcd_printf(const char *fmt, ...);
02110903 CLC	263	void lcd_clear(void);
02110903 CLC	264	int lcd_display_bitmap(ulong bmp_image, int x, int y);
fe8c2806	265
395166cf VB	266	/**
	267	* Get the width of the LCD in pixels
	268	*
	269	* @return width of LCD in pixels
	270	*/
	271	int lcd_get_pixel_width(void);
	272
	273	/**
	274	* Get the height of the LCD in pixels
	275	*
	276	* @return height of LCD in pixels
	277	*/
	278	int lcd_get_pixel_height(void);
	279
	280	/**
	281	* Get the number of text lines/rows on the LCD
	282	*
	283	* @return number of rows
	284	*/
	285	int lcd_get_screen_rows(void);
	286
	287	/**
	288	* Get the number of text columns on the LCD
	289	*
	290	* @return number of columns
	291	*/
	292	int lcd_get_screen_columns(void);
	293
4d03634e NK	294	/**
	295	* Get the background color of the LCD
	296	*
	297	* @return background color value
	298	*/
	299	int lcd_getbgcolor(void);
	300
	301	/**
	302	* Get the foreground color of the LCD
	303	*
	304	* @return foreground color value
	305	*/
	306	int lcd_getfgcolor(void);
	307
395166cf VB	308	/**
	309	* Set the position of the text cursor
	310	*
	311	* @param col Column to place cursor (0 = left side)
	312	* @param row Row to place cursor (0 = top line)
	313	*/
	314	void lcd_position_cursor(unsigned col, unsigned row);
	315
6b59e03e HS	316	/* Allow boards to customize the information displayed */
6b59e03e HS	317	void lcd_show_board_info(void);
8655b6f8	318
676d319e SG	319	/* Return the size of the LCD frame buffer, and the line length */
	320	int lcd_get_size(int *line_length);
	321
6a195d2d SW	322	int lcd_dt_simplefb_add_node(void *blob);
	323	int lcd_dt_simplefb_enable_existing_node(void *blob);
	324
7d95f2a3 SG	325	/* Update the LCD / flush the cache */
	326	void lcd_sync(void);
	327
8655b6f8 WD	328	/************************************************************************/
	329	/* ** BITMAP DISPLAY SUPPORT */
	330	/************************************************************************/
639221c7	331	#if defined(CONFIG_CMD_BMP) \|\| defined(CONFIG_SPLASH_SCREEN)
8655b6f8 WD	332	# include <bmp_layout.h>
8655b6f8 WD	333	# include <asm/byteorder.h>
639221c7	334	#endif
8655b6f8	335
8655b6f8 WD	336	/*
	337	* Information about displays we are using. This is for configuring
	338	* the LCD controller and memory allocation. Someone has to know what
	339	* is connected, as we can't autodetect anything.
	340	*/
6d0f6bcf	341	#define CONFIG_SYS_HIGH 0 /* Pins are active high */
6b035141	342	#define CONFIG_SYS_LOW 1 /* Pins are active low */
8655b6f8 WD	343
	344	#define LCD_MONOCHROME 0
	345	#define LCD_COLOR2 1
	346	#define LCD_COLOR4 2
	347	#define LCD_COLOR8 3
	348	#define LCD_COLOR16 4
57d76a89	349	#define LCD_COLOR32 5
8655b6f8	350	/----------------------------------------------------------------------/
88804d19	351	#if defined(CONFIG_LCD_INFO_BELOW_LOGO)
8655b6f8 WD	352	# define LCD_INFO_X 0
	353	# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
	354	#elif defined(CONFIG_LCD_LOGO)
	355	# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
6b035141	356	# define LCD_INFO_Y VIDEO_FONT_HEIGHT
8655b6f8	357	#else
6b035141 JH	358	# define LCD_INFO_X VIDEO_FONT_WIDTH
6b035141 JH	359	# define LCD_INFO_Y VIDEO_FONT_HEIGHT
8655b6f8 WD	360	#endif
	361
	362	/* Default to 8bpp if bit depth not specified */
	363	#ifndef LCD_BPP
	364	# define LCD_BPP LCD_COLOR8
	365	#endif
	366	#ifndef LCD_DF
	367	# define LCD_DF 1
	368	#endif
	369
	370	/* Calculate nr. of bits per pixel and nr. of colors */
	371	#define NBITS(bit_code) (1 << (bit_code))
	372	#define NCOLORS(bit_code) (1 << NBITS(bit_code))
	373
	374	/************************************************************************/
	375	/* ** CONSOLE CONSTANTS */
	376	/************************************************************************/
f4469f50	377	#if LCD_BPP == LCD_COLOR8
8655b6f8 WD	378
	379	/*
	380	* 8bpp color definitions
	381	*/
	382	# define CONSOLE_COLOR_BLACK 0
	383	# define CONSOLE_COLOR_RED 1
	384	# define CONSOLE_COLOR_GREEN 2
	385	# define CONSOLE_COLOR_YELLOW 3
	386	# define CONSOLE_COLOR_BLUE 4
	387	# define CONSOLE_COLOR_MAGENTA 5
	388	# define CONSOLE_COLOR_CYAN 6
	389	# define CONSOLE_COLOR_GREY 14
	390	# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
	391
57d76a89 HP	392	#elif LCD_BPP == LCD_COLOR32
	393	/*
	394	* 32bpp color definitions
	395	*/
	396	# define CONSOLE_COLOR_RED 0x00ff0000
	397	# define CONSOLE_COLOR_GREEN 0x0000ff00
	398	# define CONSOLE_COLOR_YELLOW 0x00ffff00
	399	# define CONSOLE_COLOR_BLUE 0x000000ff
	400	# define CONSOLE_COLOR_MAGENTA 0x00ff00ff
	401	# define CONSOLE_COLOR_CYAN 0x0000ffff
	402	# define CONSOLE_COLOR_GREY 0x00aaaaaa
	403	# define CONSOLE_COLOR_BLACK 0x00000000
	404	# define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest*/
	405	# define NBYTES(bit_code) (NBITS(bit_code) >> 3)
	406
8655b6f8 WD	407	#else
	408
	409	/*
	410	* 16bpp color definitions
	411	*/
	412	# define CONSOLE_COLOR_BLACK 0x0000
	413	# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
	414
	415	#endif /* color definitions */
	416
8655b6f8 WD	417	/************************************************************************/
	418	#ifndef PAGE_SIZE
	419	# define PAGE_SIZE 4096
	420	#endif
	421
8655b6f8 WD	422	/************************************************************************/
	423
	424	#endif /* _LCD_H_ */