kernel: Update to 3.10.9.

[ipfire-3.x.git] / kernel / config-armv7hl-exynos

CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_MEMORY_H=y

#
# Kernel Performance Events And Counters
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set

#
# System Type
#
# CONFIG_ARCH_MULTIPLATFORM is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_PLAT_SAMSUNG=y
CONFIG_PLAT_S5P=y

#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
# CONFIG_S5P_CLOCK is not set
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
# CONFIG_S5P_IRQ is not set
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_HSMMC2=y
CONFIG_S3C_DEV_HSMMC3=y
CONFIG_S3C_DEV_I2C1=y
CONFIG_S3C_DEV_I2C3=y
CONFIG_S3C_DEV_I2C7=y
CONFIG_S3C_DEV_USB_HSOTG=y
CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_RTC=y
CONFIG_SAMSUNG_DEV_KEYPAD=y
CONFIG_SAMSUNG_DEV_PWM=y
CONFIG_SAMSUNG_DEV_BACKLIGHT=y
CONFIG_S5P_DEV_FIMC0=y
CONFIG_S5P_DEV_FIMC1=y
CONFIG_S5P_DEV_FIMC2=y
CONFIG_S5P_DEV_FIMC3=y
CONFIG_S5P_DEV_FIMD0=y
CONFIG_S5P_DEV_MFC=y
CONFIG_S3C24XX_PWM=y
CONFIG_SAMSUNG_DMADEV=y

#
# Power management
#
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S5P_PM=y
CONFIG_S5P_SLEEP=y
CONFIG_DEBUG_S3C_UART=0

#
# SAMSUNG EXYNOS SoCs Support
#
CONFIG_ARCH_EXYNOS4=y
# CONFIG_ARCH_EXYNOS5 is not set

#
# EXYNOS SoCs
#
CONFIG_CPU_EXYNOS4210=y
CONFIG_SOC_EXYNOS4212=y
CONFIG_SOC_EXYNOS4412=y
CONFIG_EXYNOS_ATAGS=y
CONFIG_EXYNOS_DEV_DMA=y
CONFIG_EXYNOS4_SETUP_FIMD0=y
CONFIG_EXYNOS4_SETUP_I2C1=y
CONFIG_EXYNOS4_SETUP_I2C3=y
CONFIG_EXYNOS4_SETUP_I2C7=y
CONFIG_EXYNOS4_SETUP_KEYPAD=y
CONFIG_EXYNOS4_SETUP_SDHCI=y
CONFIG_EXYNOS4_SETUP_SDHCI_GPIO=y
CONFIG_EXYNOS4_SETUP_USB_PHY=y

#
# EXYNOS4210 Boards
#
# CONFIG_MACH_SMDKC210 is not set
# CONFIG_MACH_SMDKV310 is not set
# CONFIG_MACH_ARMLEX4210 is not set
# CONFIG_MACH_UNIVERSAL_C210 is not set
# CONFIG_MACH_NURI is not set
# CONFIG_MACH_ORIGEN is not set

#
# EXYNOS4212 Boards
#
CONFIG_MACH_SMDK4212=y

#
# EXYNOS4412 Boards
#
CONFIG_MACH_SMDK4412=y

#
# Flattened Device Tree based board for EXYNOS SoCs
#
CONFIG_MACH_EXYNOS4_DT=y

#
# Configuration for HSMMC 8-bit bus width
#
# CONFIG_EXYNOS4_SDHCI_CH0_8BIT is not set
# CONFIG_EXYNOS4_SDHCI_CH2_8BIT is not set

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
CONFIG_CACHE_PL310=y
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_742230 is not set
# CONFIG_ARM_ERRATA_742231 is not set
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_PL310_ERRATA_753970 is not set

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set

#
# Kernel Features
#
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_HZ=200
# CONFIG_THUMB2_KERNEL is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
# CONFIG_XIP_KERNEL is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# ARM CPU frequency scaling drivers
#
CONFIG_ARM_EXYNOS_CPUFREQ=y
CONFIG_ARM_EXYNOS4210_CPUFREQ=y
CONFIG_ARM_EXYNOS4X12_CPUFREQ=y
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Power management options
#
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_RUNTIME=y

#
# Generic Driver Options
#
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_ONENAND_SAMSUNG is not set

#
# Input device support
#
CONFIG_INPUT_MATRIXKMAP=y

#
# Input Device Drivers
#
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_INPUT_PWM_BEEPER=m

#
# Serial drivers
#
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_I2C_ALGOBIT=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_S3C2410=y

#
# Pin controllers
#
# CONFIG_PINCTRL_EXYNOS5440 is not set

#
# Native drivers
#
# CONFIG_CPU_THERMAL is not set

#
# Watchdog Device Drivers
#
CONFIG_S3C2410_WATCHDOG=y

#
# Multimedia core support
#
# CONFIG_TTPCI_EEPROM is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set

#
# Graphics support
#
CONFIG_DRM=y
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
CONFIG_FB_MODE_HELPERS=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_S3C is not set
CONFIG_BACKLIGHT_PWM=m

#
# Console display driver support
#
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_SOC_SAMSUNG=m
# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set

#
# I2C HID support
#
# CONFIG_USB_ARCH_HAS_XHCI is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_S5P=y
CONFIG_USB_OHCI_EXYNOS=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_S3C_DMA=y

#
# LED drivers
#
CONFIG_LEDS_PWM=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_EXYNOS_MCT=y
CONFIG_CLKSRC_SAMSUNG_PWM=y

#
# Magnetometer sensors
#
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set
CONFIG_GIC_NON_BANKED=y

#
# Kernel hacking
#
# CONFIG_DEBUG_SLAB is not set

#
# RCU Debugging
#
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_S3C_UART0=y
# CONFIG_DEBUG_S3C_UART1 is not set
# CONFIG_DEBUG_S3C_UART2 is not set
# CONFIG_DEBUG_S3C_UART3 is not set
# CONFIG_DEBUG_LL_UART_NONE is not set
CONFIG_DEBUG_EXYNOS_UART=y
CONFIG_DEBUG_LL_INCLUDE="debug/exynos.S"
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"