[people/ms/u-boot.git] / scripts / kconfig / Makefile

# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile

PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
	localmodconfig localyesconfig

ifdef KBUILD_KCONFIG
Kconfig := $(KBUILD_KCONFIG)
else
Kconfig := Kconfig
endif

# We need this, in case the user has it in its environment
unexport CONFIG_

xconfig: $(obj)/qconf
	$< $(Kconfig)

gconfig: $(obj)/gconf
	$< $(Kconfig)

menuconfig: $(obj)/mconf
	$< $(Kconfig)

config: $(obj)/conf
	$< --oldaskconfig $(Kconfig)

nconfig: $(obj)/nconf
	$< $(Kconfig)

oldconfig: $(obj)/conf
	$< --$@ $(Kconfig)

silentoldconfig: $(obj)/conf
	$(Q)mkdir -p include/config include/generated
	$< --$@ $(Kconfig)

localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
	$(Q)mkdir -p include/config include/generated
	$(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
	$(Q)if [ -f .config ]; then 					\
			cmp -s .tmp.config .config ||			\
			(mv -f .config .config.old.1;			\
			 mv -f .tmp.config .config;			\
			 $(obj)/conf --silentoldconfig $(Kconfig);	\
			 mv -f .config.old.1 .config.old)		\
	else								\
			mv -f .tmp.config .config;			\
			$(obj)/conf --silentoldconfig $(Kconfig);	\
	fi
	$(Q)rm -f .tmp.config

# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
	$(Q)echo "  GEN     config.pot"
	$(Q)xgettext --default-domain=linux                         \
	    --add-comments --keyword=_ --keyword=N_                 \
	    --from-code=UTF-8                                       \
	    --files-from=$(srctree)/scripts/kconfig/POTFILES.in     \
	    --directory=$(srctree) --directory=$(objtree)           \
	    --output $(obj)/config.pot
	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
	$(Q)(for i in `ls $(srctree)/arch/*/Kconfig      \
	    $(srctree)/arch/*/um/Kconfig`;               \
	    do                                           \
		echo "  GEN     $$i";                    \
		$(obj)/kxgettext $$i                     \
		     >> $(obj)/config.pot;               \
	    done )
	$(Q)echo "  GEN     linux.pot"
	$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
	    --output $(obj)/linux.pot
	$(Q)rm -f $(obj)/config.pot

PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig

allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
	$< --$@ $(Kconfig)

PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig

listnewconfig olddefconfig: $(obj)/conf
	$< --$@ $(Kconfig)

# oldnoconfig is an alias of olddefconfig, because people already are dependent
# on its behavior(sets new symbols to their default value but not 'n') with the
# counter-intuitive name.
oldnoconfig: $(obj)/conf
	$< --olddefconfig $(Kconfig)

savedefconfig: $(obj)/conf
	$< --$@=defconfig $(Kconfig)

defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
	$< --defconfig $(Kconfig)
else
	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif

%_defconfig: $(obj)/conf
	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)

configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config)

define mergeconfig
$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture))
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1))
$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
endef

PHONY += kvmconfig
kvmconfig:
	$(call mergeconfig,kvm_guest)

PHONY += tinyconfig
tinyconfig: allnoconfig
	$(call mergeconfig,tiny)

# Help text used by make help
help:
	@echo  '  config	  - Update current config utilising a line-oriented program'
	@echo  '  nconfig         - Update current config utilising a ncurses menu based program'
	@echo  '  menuconfig	  - Update current config utilising a menu based program'
	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
	@echo  '  localmodconfig  - Update current config disabling modules not loaded'
	@echo  '  localyesconfig  - Update current config converting local mods to core'
	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
	@echo  '  defconfig	  - New config with default from ARCH supplied defconfig'
	@echo  '  savedefconfig   - Save current config as ./defconfig (minimal config)'
	@echo  '  allnoconfig	  - New config where all options are answered with no'
	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
	@echo  '  allmodconfig	  - New config selecting modules when possible'
	@echo  '  alldefconfig    - New config with all symbols set to default'
	@echo  '  randconfig	  - New config with random answer to all options'
	@echo  '  listnewconfig   - List new options'
	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
#	@echo  '  kvmconfig	  - Enable additional options for guest kernel support'
#	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'

# lxdialog stuff
check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh

# Use recursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
                    -DLOCALE

# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf:	  Used for defconfig, oldconfig and related targets
# nconf:  Used for the nconfig target.
#         Utilizes ncurses
# mconf:  Used for the menuconfig target
#         Utilizes the lxdialog package
# qconf:  Used for the xconfig target
#         Based on QT which needs to be installed to compile it
# gconf:  Used for the gconfig target
#         Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours

lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o

conf-objs	:= conf.o  zconf.tab.o
mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs	:= kxgettext.o zconf.tab.o
qconf-cxxobjs	:= qconf.o
qconf-objs	:= zconf.tab.o
gconf-objs	:= gconf.o zconf.tab.o

hostprogs-y := conf nconf mconf kxgettext qconf gconf

clean-files	:= qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files	+= zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
clean-files     += config.pot linux.pot

# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
PHONY += $(obj)/dochecklxdialog
$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
$(obj)/dochecklxdialog:
	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)

always := dochecklxdialog

# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))

# generated files seem to need this to find local include files
HOSTCFLAGS_zconf.lex.o	:= -I$(src)
HOSTCFLAGS_zconf.tab.o	:= -I$(src)

LEX_PREFIX_zconf	:= zconf
YACC_PREFIX_zconf	:= zconf

HOSTLOADLIBES_qconf	= $(KC_QT_LIBS)
HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS)

HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                          -Wno-missing-prototypes

HOSTLOADLIBES_mconf   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))

HOSTLOADLIBES_nconf	= $(shell \
				pkg-config --libs menuw panelw ncursesw 2>/dev/null \
				|| pkg-config --libs menu panel ncurses 2>/dev/null \
				|| echo "-lmenu -lpanel -lncurses"  )
$(obj)/qconf.o: $(obj)/.tmp_qtcheck

ifeq ($(MAKECMDGOALS),xconfig)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck

# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
	if ! pkg-config --exists QtCore 2> /dev/null; then \
	    echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
	    pkg-config --exists qt 2> /dev/null && pkg=qt; \
	    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
	    if [ -n "$$pkg" ]; then \
	      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
	      libs="\$$(shell pkg-config $$pkg --libs)"; \
	      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
	      dir="$$(pkg-config $$pkg --variable=prefix)"; \
	    else \
	      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
	      done; \
	      if [ -z "$$dir" ]; then \
	        echo >&2 "*"; \
	        echo >&2 "* Unable to find any QT installation. Please make sure that"; \
	        echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
	        echo >&2 "* either qmake can be found or install pkg-config or set"; \
	        echo >&2 "* the QTDIR environment variable to the correct location."; \
	        echo >&2 "*"; \
	        false; \
	      fi; \
	      libpath=$$dir/lib; lib=qt; osdir=""; \
	      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
	        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
	      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
	      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
	      cflags="-I$$dir/include"; \
	      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
	      moc="$$dir/bin/moc"; \
	    fi; \
	    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
	      echo "*"; \
	      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
	      echo "*"; \
	      moc="/usr/bin/moc"; \
	    fi; \
	else \
	  cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
	  libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
	  moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
	  [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
	fi; \
	echo "KC_QT_CFLAGS=$$cflags" > $@; \
	echo "KC_QT_LIBS=$$libs" >> $@; \
	echo "KC_QT_MOC=$$moc" >> $@
endif

$(obj)/gconf.o: $(obj)/.tmp_gtkcheck

ifeq ($(MAKECMDGOALS),gconfig)
-include $(obj)/.tmp_gtkcheck

# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
			touch $@;								\
		else									\
			echo >&2 "*"; 							\
			echo >&2 "* GTK+ is present but version >= 2.0.0 is required.";	\
			echo >&2 "*";							\
			false;								\
		fi									\
	else										\
		echo >&2 "*"; 								\
		echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; 	\
		echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; 	\
		echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
		echo >&2 "*"; 								\
		false;									\
	fi
endif

$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c

$(obj)/qconf.o: $(obj)/qconf.moc

quiet_cmd_moc = MOC     $@
      cmd_moc = $(KC_QT_MOC) -i $< -o $@

$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
	$(call cmd,moc)

# Extract gconf menu items for I18N support
$(obj)/gconf.glade.h: $(obj)/gconf.glade
	$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
	$(obj)/gconf.glade
Commit	Line	Data
0a9064fb MY	1	# ===========================================================================
	2	# Kernel configuration targets
	3	# These targets are used from top-level makefile
	4
	5	PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
	6	localmodconfig localyesconfig
	7
	8	ifdef KBUILD_KCONFIG
	9	Kconfig := $(KBUILD_KCONFIG)
	10	else
	11	Kconfig := Kconfig
	12	endif
	13
	14	# We need this, in case the user has it in its environment
	15	unexport CONFIG_
	16
	17	xconfig: $(obj)/qconf
	18	$< $(Kconfig)
	19
	20	gconfig: $(obj)/gconf
	21	$< $(Kconfig)
	22
	23	menuconfig: $(obj)/mconf
	24	$< $(Kconfig)
	25
	26	config: $(obj)/conf
	27	$< --oldaskconfig $(Kconfig)
	28
	29	nconfig: $(obj)/nconf
	30	$< $(Kconfig)
	31
	32	oldconfig: $(obj)/conf
	33	$< --$@ $(Kconfig)
	34
	35	silentoldconfig: $(obj)/conf
	36	$(Q)mkdir -p include/config include/generated
	37	$< --$@ $(Kconfig)
	38
	39	localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
	40	$(Q)mkdir -p include/config include/generated
	41	$(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
	42	$(Q)if [ -f .config ]; then \
	43	cmp -s .tmp.config .config \|\| \
	44	(mv -f .config .config.old.1; \
	45	mv -f .tmp.config .config; \
	46	$(obj)/conf --silentoldconfig $(Kconfig); \
	47	mv -f .config.old.1 .config.old) \
	48	else \
	49	mv -f .tmp.config .config; \
	50	$(obj)/conf --silentoldconfig $(Kconfig); \
	51	fi
	52	$(Q)rm -f .tmp.config
	53
	54	# Create new linux.pot file
	55	# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
	56	update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
	57	$(Q)echo " GEN config.pot"
	58	$(Q)xgettext --default-domain=linux \
	59	--add-comments --keyword=_ --keyword=N_ \
	60	--from-code=UTF-8 \
	61	--files-from=$(srctree)/scripts/kconfig/POTFILES.in \
	62	--directory=$(srctree) --directory=$(objtree) \
	63	--output $(obj)/config.pot
	64	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
65	$(Q)(for i in `ls $(srctree)/arch/*/Kconfig \
66	$(srctree)/arch/*/um/Kconfig`; \
67	do \
68	echo " GEN $$i"; \
69	$(obj)/kxgettext $$i \
70	>> $(obj)/config.pot; \
71	done )
72	$(Q)echo " GEN linux.pot"
73	$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
74	--output $(obj)/linux.pot
75	$(Q)rm -f $(obj)/config.pot
76
77	PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
78
79	allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
80	$< --$@ $(Kconfig)
81
82	PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig
83
84	listnewconfig olddefconfig: $(obj)/conf
85	$< --$@ $(Kconfig)
86
87	# oldnoconfig is an alias of olddefconfig, because people already are dependent
88	# on its behavior(sets new symbols to their default value but not 'n') with the
89	# counter-intuitive name.
90	oldnoconfig: $(obj)/conf
91	$< --olddefconfig $(Kconfig)
92
93	savedefconfig: $(obj)/conf
94	$< --$@=defconfig $(Kconfig)
95
96	defconfig: $(obj)/conf
97	ifeq ($(KBUILD_DEFCONFIG),)
98	$< --defconfig $(Kconfig)
99	else
100	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
101	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
102	endif
103
104	%_defconfig: $(obj)/conf
105	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
106
ad618992 MY	107	configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config)
	108
	109	define mergeconfig
	110	$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
	111	$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture))
	112	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1))
	113	$(Q)yes "" \| $(MAKE) -f $(srctree)/Makefile oldconfig
	114	endef
	115
	116	PHONY += kvmconfig
	117	kvmconfig:
	118	$(call mergeconfig,kvm_guest)
	119
	120	PHONY += tinyconfig
	121	tinyconfig: allnoconfig
	122	$(call mergeconfig,tiny)
	123
0a9064fb MY	124	# Help text used by make help
	125	help:
	126	@echo ' config - Update current config utilising a line-oriented program'
	127	@echo ' nconfig - Update current config utilising a ncurses menu based program'
	128	@echo ' menuconfig - Update current config utilising a menu based program'
	129	@echo ' xconfig - Update current config utilising a QT based front-end'
	130	@echo ' gconfig - Update current config utilising a GTK based front-end'
	131	@echo ' oldconfig - Update current config utilising a provided .config as base'
	132	@echo ' localmodconfig - Update current config disabling modules not loaded'
	133	@echo ' localyesconfig - Update current config converting local mods to core'
	134	@echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
	135	@echo ' defconfig - New config with default from ARCH supplied defconfig'
	136	@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
	137	@echo ' allnoconfig - New config where all options are answered with no'
	138	@echo ' allyesconfig - New config where all options are accepted with yes'
	139	@echo ' allmodconfig - New config selecting modules when possible'
	140	@echo ' alldefconfig - New config with all symbols set to default'
	141	@echo ' randconfig - New config with random answer to all options'
	142	@echo ' listnewconfig - List new options'
	143	@echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
ad618992 MY	144	# @echo ' kvmconfig - Enable additional options for guest kernel support'
ad618992 MY	145	# @echo ' tinyconfig - Configure the tiniest possible kernel'
0a9064fb MY	146
	147	# lxdialog stuff
	148	check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
	149
	150	# Use recursively expanded variables so we do not call gcc unless
	151	# we really need to do so. (Do not call gcc as part of make mrproper)
	152	HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
	153	-DLOCALE
	154
	155	# ===========================================================================
	156	# Shared Makefile for the various kconfig executables:
	157	# conf: Used for defconfig, oldconfig and related targets
	158	# nconf: Used for the nconfig target.
	159	# Utilizes ncurses
	160	# mconf: Used for the menuconfig target
	161	# Utilizes the lxdialog package
	162	# qconf: Used for the xconfig target
	163	# Based on QT which needs to be installed to compile it
	164	# gconf: Used for the gconfig target
	165	# Based on GTK which needs to be installed to compile it
	166	# object files used by all kconfig flavours
	167
	168	lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
	169	lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
	170
	171	conf-objs := conf.o zconf.tab.o
	172	mconf-objs := mconf.o zconf.tab.o $(lxdialog)
	173	nconf-objs := nconf.o zconf.tab.o nconf.gui.o
	174	kxgettext-objs := kxgettext.o zconf.tab.o
	175	qconf-cxxobjs := qconf.o
	176	qconf-objs := zconf.tab.o
	177	gconf-objs := gconf.o zconf.tab.o
	178
cb6e7b0d	179	hostprogs-y := conf nconf mconf kxgettext qconf gconf
0a9064fb MY	180
	181	clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
	182	clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
0a9064fb MY	183	clean-files += config.pot linux.pot
	184
	185	# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
	186	PHONY += $(obj)/dochecklxdialog
	187	$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
	188	$(obj)/dochecklxdialog:
	189	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
	190
	191	always := dochecklxdialog
	192
	193	# Add environment specific flags
	194	HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
	195
	196	# generated files seem to need this to find local include files
	197	HOSTCFLAGS_zconf.lex.o := -I$(src)
	198	HOSTCFLAGS_zconf.tab.o := -I$(src)
	199
	200	LEX_PREFIX_zconf := zconf
	201	YACC_PREFIX_zconf := zconf
	202
	203	HOSTLOADLIBES_qconf = $(KC_QT_LIBS)
	204	HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS)
	205
	206	HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
	207	HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
	208	-Wno-missing-prototypes
	209
	210	HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
	211
	212	HOSTLOADLIBES_nconf = $(shell \
ad618992 MY	213	pkg-config --libs menuw panelw ncursesw 2>/dev/null \
ad618992 MY	214	\|\| pkg-config --libs menu panel ncurses 2>/dev/null \
0a9064fb MY	215	\|\| echo "-lmenu -lpanel -lncurses" )
	216	$(obj)/qconf.o: $(obj)/.tmp_qtcheck
	217
cb6e7b0d	218	ifeq ($(MAKECMDGOALS),xconfig)
0a9064fb MY	219	$(obj)/.tmp_qtcheck: $(src)/Makefile
	220	-include $(obj)/.tmp_qtcheck
	221
	222	# QT needs some extra effort...
	223	$(obj)/.tmp_qtcheck:
	224	@set -e; echo " CHECK qt"; dir=""; pkg=""; \
	225	if ! pkg-config --exists QtCore 2> /dev/null; then \
	226	echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
	227	pkg-config --exists qt 2> /dev/null && pkg=qt; \
	228	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
	229	if [ -n "$$pkg" ]; then \
	230	cflags="\$$(shell pkg-config $$pkg --cflags)"; \
	231	libs="\$$(shell pkg-config $$pkg --libs)"; \
	232	moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
	233	dir="$$(pkg-config $$pkg --variable=prefix)"; \
	234	else \
	235	for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
	236	if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
	237	done; \
	238	if [ -z "$$dir" ]; then \
	239	echo >&2 "*"; \
	240	echo >&2 "* Unable to find any QT installation. Please make sure that"; \
	241	echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
	242	echo >&2 "* either qmake can be found or install pkg-config or set"; \
	243	echo >&2 "* the QTDIR environment variable to the correct location."; \
	244	echo >&2 "*"; \
	245	false; \
	246	fi; \
	247	libpath=$$dir/lib; lib=qt; osdir=""; \
	248	$(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
	249	osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
	250	test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
	251	test -f $$libpath/libqt-mt.so && lib=qt-mt; \
	252	cflags="-I$$dir/include"; \
	253	libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
	254	moc="$$dir/bin/moc"; \
	255	fi; \
	256	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
	257	echo "*"; \
	258	echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
	259	echo "*"; \
	260	moc="/usr/bin/moc"; \
	261	fi; \
	262	else \
	263	cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
	264	libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
	265	moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
	266	[ -n "$$moc" ] \|\| moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
	267	fi; \
	268	echo "KC_QT_CFLAGS=$$cflags" > $@; \
	269	echo "KC_QT_LIBS=$$libs" >> $@; \
	270	echo "KC_QT_MOC=$$moc" >> $@
	271	endif
	272
	273	$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
	274
cb6e7b0d	275	ifeq ($(MAKECMDGOALS),gconfig)
0a9064fb MY	276	-include $(obj)/.tmp_gtkcheck
	277
	278	# GTK needs some extra effort, too...
	279	$(obj)/.tmp_gtkcheck:
	280	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
	281	if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
	282	touch $@; \
	283	else \
	284	echo >&2 "*"; \
	285	echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
	286	echo >&2 "*"; \
	287	false; \
	288	fi \
	289	else \
	290	echo >&2 "*"; \
	291	echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
	292	echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
	293	echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
	294	echo >&2 "*"; \
	295	false; \
	296	fi
	297	endif
	298
	299	$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
	300
	301	$(obj)/qconf.o: $(obj)/qconf.moc
	302
	303	quiet_cmd_moc = MOC $@
	304	cmd_moc = $(KC_QT_MOC) -i $< -o $@
	305
	306	$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
	307	$(call cmd,moc)
	308
	309	# Extract gconf menu items for I18N support
	310	$(obj)/gconf.glade.h: $(obj)/gconf.glade
	311	$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
	312	$(obj)/gconf.glade