]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blame - sim/bfin/ChangeLog
[PATCH] sim: make sure to include strsignal prototype
[thirdparty/binutils-gdb.git] / sim / bfin / ChangeLog
CommitLineData
2232061b
MF
12012-03-24 Mike Frysinger <vapier@gentoo.org>
2
3 * aclocal.m4, config.in, configure: Regenerate.
4
e62bb22a
MF
52012-03-19 Robin Getz <robin.getz@analog.com>
6 Mike Frysinger <vapier@gentoo.org>
7
8 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
9 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
10 out from the saturate logic. Do not set V ASTAT bits when working
11 with accumulators.
12 (decode_ALU2op_0): Add new argument to lshift call.
13 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
14 Likewise.
15
8dbfaed8
MF
162012-03-18 Mike Frysinger <vapier@gentoo.org>
17
18 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
19 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
20 amc->bank_base.
21 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
22
410bbc94
MF
232012-03-18 Mike Frysinger <vapier@gentoo.org>
24
25 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
26 ARRAY_SIZE rather than hardcoded constant.
27
84de2f06
MF
282012-02-04 Mike Frysinger <vapier@gentoo.org>
29
30 * config.in: Regenerate.
31 * configure: Likewise.
32 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
33 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
34 _LINUX_TYPES_H defines.
35
cc5add8c
MF
362011-12-03 Mike Frysinger <vapier@gentoo.org>
37
38 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
39 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
40 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
41 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
42 tstr in the tbuf output.
43
db2e4d67
MF
442011-12-03 Mike Frysinger <vapier@gentoo.org>
45
46 * Makefile.in: Delete all dependency rules.
47 * aclocal.m4, configure: Regenerate.
48
4399a56b
MF
492011-10-19 Mike Frysinger <vapier@gentoo.org>
50
51 * configure: Regenerate after common/acinclude.m4 update.
52
9c082ca8
MF
532011-10-17 Mike Frysinger <vapier@gentoo.org>
54
55 * configure.ac: Change include to common/acinclude.m4.
56 * aclocal.m4, configure: Regenerate.
57
6ffe910a
MF
582011-10-17 Mike Frysinger <vapier@gentoo.org>
59
60 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
61 call. Replace common.m4 include with SIM_AC_COMMON.
62 * configure: Regenerate.
63
39c1f96a
MF
642011-09-28 Mike Frysinger <vapier@gentoo.org>
65
66 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
67
2419798b
MF
682011-07-05 Mike Frysinger <vapier@gentoo.org>
69
70 * interp.c (sim_do_command): Delete.
71
a931db6a
MF
722011-07-01 Mike Frysinger <vapier@gentoo.org>
73
74 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
75 stat_map_32 and stat_map_64.
76 (cb_libgloss_stat_map_32): New stat map.
77 (stat_map_32, stat_map_64): New stat map pointers.
78 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
79 stat_map_64 to cb_linux_stat_map_64.
80 (bfin_virtual_init): New function.
81 (sim_create_inferior): Call bfin_virtual_init for all other envs.
82
ce2486ab
MF
832011-06-22 Mike Frysinger <vapier@gentoo.org>
84
85 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
86 sc.result2 and dreg 2 to sc.errcode.
87
1f20b145
MF
882011-06-18 Robin Getz <robin.getz@analog.com>
89
90 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
91 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
92 ASHIFT accumulator insns.
93
b4876e04
MF
942011-06-18 Robin Getz <robin.getz@analog.com>
95
96 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
97 (lshiftrt): Likewise.
98
d5fcd950
MF
992011-06-18 Robin Getz <robin.getz@analog.com>
100
101 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
102 rather than get_extended_acc in LSHIFT insns.
103
a56a1954
MF
1042011-06-18 Robin Getz <robin.getz@analog.com>
105
106 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
107 Check MM once when mmod is M_FU to match M_TFU better.
108
90e13d65
MF
1092011-06-18 Robin Getz <robin.getz@analog.com>
110
111 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
112 32, perform a left shift. Update the corresponding AV bit. Set
113 AZ when the low 32bits are also zero.
114
99dcc4dc
MF
1152011-06-18 Robin Getz <robin.getz@analog.com>
116
117 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
118 call lshift only when count is positive. Otherwise, call ashiftrt.
119 With arithmetic right shift insns, call ashiftrt when the value is
120 small enough, otherwise call lshift.
121
a0a71a7f
MF
1222011-06-18 Robin Getz <robin.getz@analog.com>
123
124 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
125 mmod is M_IH rather than computing the result by hand.
126
388aa9fe
MF
1272011-06-18 Robin Getz <robin.getz@analog.com>
128
129 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
130 before saturation, set sat when more cases saturate, and set the
131 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
132 M_W32, change the max values compared against.
133 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
134 when processing MAC1 and pass v_0 when processing MAC0. Combine
135 the results into the V/VS ASTAT bits.
136
f2a56d0a
MF
1372011-06-18 Robin Getz <robin.getz@analog.com>
138
139 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
140 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
141 is M_TFU.
142
ef26d60e
MF
1432011-06-18 Robin Getz <robin.getz@analog.com>
144
145 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
146 allow MM to sign extend all the time.
147 (decode_macfunc): Likewise. Drop sign extension of unsigned
148 values.
149
73aae8ef
MF
1502011-06-18 Robin Getz <robin.getz@analog.com>
151
b02cc5b9 152 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
73aae8ef
MF
153 (decode_macfunc): Likewise when mmod is M_IH.
154
886ea33b
MF
1552011-06-18 Mike Frysinger <vapier@gentoo.org>
156
157 * interp.c (sim_create_inferior): Change free to freeargv.
158
eb324344
MF
1592011-06-04 Mike Frysinger <vapier@gentoo.org>
160
161 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
162 (bf537_port): Define applicable devices with PORT to the glue-or
163 devices instead of SIC.
164 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
165 Only parse reg/type when the device has an address. Move the call
166 to dv_bfin_hw_port_parse up before slash check.
167
082e1c4a
MF
1682011-06-04 Mike Frysinger <vapier@gentoo.org>
169
170 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
171 BFIN_SIC_TO_CEC_PORTS definition.
172 (SIC_PORTS): New define.
173 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
174 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
175 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
176 Delete old layouts.
177 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
178 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
179 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
180 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
181 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
182 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
183 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
184 * machs.c (bfin_port_layout): New structure.
185 (bfin_model_data): Add new "port" and "port_count" members.
186 (PORT, SIC): New defines.
187 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
188 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
189 Move and redefine port layout from dv-bfin_sic.c to here.
190 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
191 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
192 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
193 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
194 bf548_port, bf549_port): New defines.
195 (bfin_model_data): Link in new bfin_port_layout.port member.
196 (dv_bfin_hw_port_parse): New function.
197 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
198 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
199 bfin_sic links with new dv_bfin_hw_port_parse function.
200
36f3e981
MF
2012011-06-03 Mike Frysinger <vapier@gentoo.org>
202
203 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
204
ea1f7d4c
MF
2052011-05-25 Mike Frysinger <vapier@gentoo.org>
206
207 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
208
f2db709f
MF
2092011-05-25 Mike Frysinger <vapier@gentoo.org>
210
211 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
212 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
213 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
214 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
215 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
216 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
217 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
218 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
219 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
220 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
221 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
222 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
223 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
224 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
225 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
226 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
227 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
228 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
229 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
230 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
231 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
232 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
233 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
234 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
235 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
236 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
237 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
238 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
239 * machs.h: ... here.
240 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
241
c43aadca
MF
2422011-05-25 Mike Frysinger <vapier@gentoo.org>
243
244 * Makefile.in (dv-bfin_pfmon.o): New target.
245 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
246 * configure: Regenerated.
247 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
248 * machs.c: Add include new bfin_pfmon.h.
249 (bfin_core_dev): Add pfmon.
250
dfb61fb6
MF
2512011-05-25 Mike Frysinger <vapier@gentoo.org>
252
253 * machs.c (bf526_roms): Add a region with rev of 2.
254 (bf54x_roms): Add regions with rev of 4.
255 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
256 bf54x_l1-0.4.h headers.
257 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
258 New header files.
259
efac2223
MF
2602011-05-14 Mike Frysinger <vapier@gentoo.org>
261
262 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
263 check for SP reg.
264
28fe96b7
MF
2652011-05-14 Mike Frysinger <vapier@gentoo.org>
266
267 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
268 local uart. When LOOP_ENA is set in mcr, write to the saved byte
269 and count fields of the uart.
270 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
271 and bfin_uart_get_next_byte.
272 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
273 check first, and skip the remaining code when LOOP_ENA is set in mcr.
274 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
275 (bfin_uart_get_next_byte): Likewise.
276 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
277 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
278 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
279
b44f3f63
MF
2802011-05-09 Mike Frysinger <vapier@gentoo.org>
281
282 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
283 from uart->lsr before setting them.
284
2613074f
MF
2852011-04-27 Mike Frysinger <vapier@gentoo.org>
286
287 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
288 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
289 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
290 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
291 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
292 Likewise.
293
054c055b
MF
2942011-04-26 Mike Frysinger <vapier@gentoo.org>
295
296 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
297 (bfin_gpio_io_write_buffer): Store the current port state into
298 "data", and call bfin_gpio_forward_ouput when the data or dir
299 MMRs are updated.
300 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
301
5e0ba1a3
MF
3022011-04-26 Mike Frysinger <vapier@gentoo.org>
303
304 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
305 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
306 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
307 mask a or mask b MMRs are written.
308 (bfin_gpio_port_event): When handling edge gpios, set the bit in
309 int_state, call bfin_gpio_forward_ints, and then clear the bit.
310 When handling level gpios, clear/set the bit in int_state rather
311 than returning immediately. Call bfin_gpio_forward_ints instead
312 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
313
0427acfb
MF
3142011-04-16 Mike Frysinger <vapier@gentoo.org>
315
316 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
317 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
318 BYTEUNPACK.
319 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
320 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
321
d2cfa400
MF
3222011-04-14 Mike Frysinger <vapier@gentoo.org>
323
324 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
325 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
326 and BYTEUNPACK insns.
327
e10d6db3
MF
3282011-04-11 Mike Frysinger <vapier@gentoo.org>
329
330 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
331 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
332 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
333 in the trace output, and call the new bfin_sic_port_event func.
334
8aacdaf4
MF
3352011-04-11 Mike Frysinger <vapier@gentoo.org>
336
337 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
338
2b12772f
MF
3392011-04-01 Mike Frysinger <vapier@gentoo.org>
340
341 * dv-bfin_otp.c (bfin_otp_ports): Declare.
342 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
343
6294f8ea
MF
3442011-03-29 Mike Frysinger <vapier@gentoo.org>
345
346 * configure: Regenerate after common/aclocal.m4 changes.
347
1a3af0bf
MF
3482011-03-28 Robin Getz <robin.getz@analog.com>
349
350 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
351 and add to casted low 16bits of A0.L and store in val0. Cast high
352 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
353 store in val1. Delete bit checks of val0 and val1.
354
36aef942
MF
3552011-03-26 Robin Getz <robin.getz@analog.com>
356
357 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
358 the result was 0x80000000 for RND12 subtraction.
359
fcd1ee07
MF
3602011-03-26 Robin Getz <robin.getz@analog.com>
361
362 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
363
a31d4fd9
MF
3642011-03-24 Mike Frysinger <vapier@gentoo.org>
365
366 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
367 major code flow point.
368 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
369 before calling hw_port_event on ourselves.
370 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
371 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
372 at the start of the function.
373
b72cc8e1
MF
3742011-03-24 Mike Frysinger <vapier@gentoo.org>
375
376 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
377 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
378 Invert port->both bit check.
379
eaf863cd
MF
3802011-03-24 Mike Frysinger <vapier@gentoo.org>
381
382 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
383 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
384
b16a1f4c
MF
3852011-03-23 Mike Frysinger <vapier@gentoo.org>
386
387 * TODO: Document some known SIC issues.
388
9922f803
MF
3892011-03-23 Mike Frysinger <vapier@gentoo.org>
390
391 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
392 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
393 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
394 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
395 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
396 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
397 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
398 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
399 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
400 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
401 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
402 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
403 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
404 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
405
2d2bab5b
MF
4062011-03-23 Mike Frysinger <vapier@gentoo.org>
407
408 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
409
972dbc8a
MF
4102011-03-23 Mike Frysinger <vapier@gentoo.org>
411
412 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
413
8e670c0a
MF
4142011-03-23 Robin Getz <robin.getz@analog.com>
415
416 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
417 value for the VIT_MAX insn, and mask off the result when done.
418
de0addfb
MF
4192011-03-23 Robin Getz <robin.getz@analog.com>
420
421 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
422 and set A0 to a0_lo when up_lo is false.
423
beb378a5
MF
4242011-03-23 Robin Getz <robin.getz@analog.com>
425
426 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
427 saturate_s40, and use the v parameter to update the AV bit. Set the
428 AC bit only when the final result is 0.
429
e4a861d1
MF
4302011-03-23 Mike Frysinger <vapier@gentoo.org>
431
432 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
433 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
434 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
435 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
436 Encode ids with the ENC macro.
437 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
438 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
439 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
440 (bfin_sic_533_port_event): Delete.
441 (bfin_sic_finish): Call set_hw_port_event with
442 bfin_sic_537_port_event for BF533 and BF59x targets.
443
8d8a9746
MF
4442011-03-23 Robin Getz <robin.getz@analog.com>
445
446 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
447 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
448
a9c3ef47
MF
4492011-03-23 Mike Frysinger <vapier@gentoo.org>
450
451 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
452 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
453 Change bfin_gpio addresses from f/g/h to 5/6/7.
454 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
455
9e6584c9
MF
4562011-03-17 Mike Frysinger <vapier@gentoo.org>
457
458 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
459 * configure: Regenerate.
460 * config.in: Regenerate.
461 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
462 kill or pread.
463
b5215db0
MF
4642011-03-15 Mike Frysinger <vapier@gentoo.org>
465
466 * Makefile.in (dv-bfin_gpio.o): New target.
467 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
468 * configure: Regenerate.
469 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
470 * machs.c: Include dv-bfin_gpio.h.
471 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
472 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
473 Delete GPIO memory stubs.
474 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
475 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
476 peripheral devices.
477 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
478
990d19fd
MF
4792011-03-15 Mike Frysinger <vapier@gentoo.org>
480
481 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
482 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
483 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
484 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
485 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
486 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
487 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
488 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
489 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
490 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
491 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
492 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
493 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
494 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
495 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
496 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
497 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
498
227d2658
MF
4992011-03-15 Robin Getz <robin.getz@analog.com>
500
501 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
502 and subs.
503
e3809a37
MF
5042011-03-15 Robin Getz <robin.getz@analog.com>
505
506 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
507
86d3d8de
MF
5082011-03-15 Robin Getz <robin.getz@analog.com>
509
510 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
511 high bit is set after extract_mult.
512 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
513 functions. Use these to update the AN bit.
514
9b7509d9
MF
5152011-03-15 Robin Getz <robin.getz@analog.com>
516
517 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
518 the extract_mult functions. Include these when updating the V, VS,
519 and V_COPY bits.
520
bf416ccd
MF
5212011-03-15 Robin Getz <robin.getz@analog.com>
522
523 * bfin-sim.c (astat_names): New global bit array.
524 (decode_CC2stat_0): Delete local astat_name and astat_names.
525 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
526 Print out ASTAT bit values when checking an ASTAT register.
527
c9329594
MF
5282010-03-15 Robin Getz <robin.getz@analog.com>
529
530 * bfin-sim.c (extract_mult): Handle M_IU.
531
f4e33aa6
MF
5322011-03-05 Mike Frysinger <vapier@gentoo.org>
533
534 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
535 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
536 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
537 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
538 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
539 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
540 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
541 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
542 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
543 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
544 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
545 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
546 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
547 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
548 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
549 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
550 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
551 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
552 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
553 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
554 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
555 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
556 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
557 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
558 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
559 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
560 tconfig.in: New Blackfin port.