board/RRvision/RRvision.c

   1 /*
   2  * (C) Copyright 2001-2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <common.h>
  25 #include <mpc8xx.h>
  26
  27 /* ------------------------------------------------------------------------- */
  28
  29 static long int dram_size (long int, long int *, long int);
  30
  31 /* ------------------------------------------------------------------------- */
  32
  33 #define _NOT_USED_      0xFFFFFFFF
  34
  35 const uint sdram_table[] =
  36 {
  37         /*
  38          * Single Read. (Offset 0 in UPMA RAM)
  39          */
  40         0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
  41         0x1FF77C47, /* last */
  42         /*
  43          * SDRAM Initialization (offset 5 in UPMA RAM)
  44          *
  45          * This is no UPM entry point. The following definition uses
  46          * the remaining space to establish an initialization
  47          * sequence, which is executed by a RUN command.
  48          *
  49          */
  50                     0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
  51         /*
  52          * Burst Read. (Offset 8 in UPMA RAM)
  53          */
  54         0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
  55         0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
  56         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  57         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  58         /*
  59          * Single Write. (Offset 18 in UPMA RAM)
  60          */
  61         0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
  62         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  63         /*
  64          * Burst Write. (Offset 20 in UPMA RAM)
  65          */
  66         0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
  67         0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
  68                                             _NOT_USED_,
  69         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  70         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  71         /*
  72          * Refresh  (Offset 30 in UPMA RAM)
  73          */
  74         0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
  75         0xFFFFFC84, 0xFFFFFC07, /* last */
  76                                 _NOT_USED_, _NOT_USED_,
  77         _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
  78         /*
  79          * Exception. (Offset 3c in UPMA RAM)
  80          */
  81         0x7FFFFC07, /* last */
  82                     _NOT_USED_, _NOT_USED_, _NOT_USED_,
  83 };
  84
  85 /* ------------------------------------------------------------------------- */
  86
  87
  88 /*
  89  * Check Board Identity:
  90  *
  91  * Always return 1 (no second DRAM bank).
  92  */
  93
  94 int checkboard (void)
  95 {
  96         char *s = getenv ("serial#");
  97
  98         puts ("Board: RRvision ");
  99
 100         for (; s && *s; ++s) {
 101                 if (*s == ' ')
 102                         break;
 103                 putc (*s);
 104         }
 105
 106         putc ('\n');
 107
 108         return (0);
 109 }
 110
 111 /* ------------------------------------------------------------------------- */
 112
 113 phys_size_t initdram (int board_type)
 114 {
 115         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 116         volatile memctl8xx_t *memctl = &immap->im_memctl;
 117         unsigned long reg;
 118         long int size8, size9;
 119         long int size = 0;
 120
 121         upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
 122
 123         /*
 124          * Preliminary prescaler for refresh (depends on number of
 125          * banks): This value is selected for four cycles every 62.4 us
 126          * with two SDRAM banks or four cycles every 31.2 us with one
 127          * bank. It will be adjusted after memory sizing.
 128          */
 129         memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 130
 131         memctl->memc_mar = 0x00000088;
 132
 133         /*
 134          * Map controller bank 1 the SDRAM bank 2 at physical address 0.
 135          */
 136         memctl->memc_or1 = CONFIG_SYS_OR2_PRELIM;
 137         memctl->memc_br1 = CONFIG_SYS_BR2_PRELIM;
 138
 139         memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));      /* no refresh yet */
 140
 141         udelay (200);
 142
 143         /* perform SDRAM initializsation sequence */
 144
 145         memctl->memc_mcr = 0x80002105;  /* SDRAM bank 0 */
 146         udelay (1);
 147         memctl->memc_mcr = 0x80002230;  /* SDRAM bank 0 - execute twice */
 148         udelay (1);
 149
 150         memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
 151
 152         udelay (1000);
 153
 154         /*
 155          * Check Bank 0 Memory Size
 156          *
 157          * try 8 column mode
 158          */
 159         size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 160                            SDRAM_BASE2_PRELIM,
 161                            SDRAM_MAX_SIZE);
 162
 163         udelay (1000);
 164
 165         /*
 166          * try 9 column mode
 167          */
 168         size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 169                            SDRAM_BASE2_PRELIM,
 170                            SDRAM_MAX_SIZE);
 171
 172         if (size8 < size9) {            /* leave configuration at 9 columns */
 173                 size = size9;
 174 /*              debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);  */
 175         } else {                        /* back to 8 columns            */
 176                 size = size8;
 177                 memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 178                 udelay (500);
 179 /*              debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);  */
 180         }
 181
 182         udelay (1000);
 183
 184         /*
 185          * Adjust refresh rate depending on SDRAM type
 186          * For types > 128 MBit leave it at the current (fast) rate
 187          */
 188         if (size < 0x02000000) {
 189                 /* reduce to 15.6 us (62.4 us / quad) */
 190                 memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 191                 udelay (1000);
 192         }
 193
 194         /*
 195          * Final mapping
 196          */
 197         memctl->memc_or1 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 198         memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 199
 200         /*
 201          * No bank 1
 202          *
 203          * invalidate bank
 204          */
 205         memctl->memc_br3 = 0;
 206
 207         /* adjust refresh rate depending on SDRAM type, one bank */
 208         reg = memctl->memc_mptpr;
 209         reg >>= 1;                      /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 210         memctl->memc_mptpr = reg;
 211
 212         udelay (10000);
 213
 214         return (size);
 215 }
 216
 217 /* ------------------------------------------------------------------------- */
 218
 219 /*
 220  * Check memory range for valid RAM. A simple memory test determines
 221  * the actually available RAM size between addresses `base' and
 222  * `base + maxsize'. Some (not all) hardware errors are detected:
 223  * - short between address lines
 224  * - short between data lines
 225  */
 226
 227 static long int dram_size (long int mamr_value, long int *base,
 228                                                    long int maxsize)
 229 {
 230         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 231         volatile memctl8xx_t *memctl = &immap->im_memctl;
 232
 233         memctl->memc_mamr = mamr_value;
 234
 235         return (get_ram_size(base, maxsize));
 236 }