]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/prodrive/alpr/init.S
ppc4xx: Use common NS16550 driver for PPC4xx UART
[people/ms/u-boot.git] / board / prodrive / alpr / init.S
1 /*
2 * (C) Copyright 2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 #include <ppc_asm.tmpl>
25 #include <asm/mmu.h>
26 #include <config.h>
27 #include <asm/ppc4xx.h>
28
29 /**************************************************************************
30 * TLB TABLE
31 *
32 * This table is used by the cpu boot code to setup the initial tlb
33 * entries. Rather than make broad assumptions in the cpu source tree,
34 * this table lets each board set things up however they like.
35 *
36 * Pointer to the table is returned in r1
37 *
38 *************************************************************************/
39
40 .section .bootpg,"ax"
41 .globl tlbtab
42
43 tlbtab:
44 tlbtab_start
45 tlbentry(0xff000000, SZ_16M, 0xff000000, 1, AC_RWX | SA_IG )
46 tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
47 tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX)
48 tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX)
49 #ifdef CONFIG_4xx_DCACHE
50 tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_G)
51 #else
52 tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG)
53 #endif
54
55 #ifdef CONFIG_SYS_INIT_RAM_DCACHE
56 /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
57 tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
58 #endif
59 tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG)
60
61 /* PCI */
62 tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 3, AC_RW | SA_IG)
63 tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 3, AC_RW | SA_IG)
64 tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 3, AC_RW | SA_IG)
65
66 /* NAND */
67 tlbentry(CONFIG_SYS_NAND_BASE, SZ_4K, CONFIG_SYS_NAND_BASE, 1, AC_RWX | SA_IG)
68 tlbtab_end