]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/samsung/smdk6400/smdk6400.c
rename CFG_ macros to CONFIG_SYS
[people/ms/u-boot.git] / board / samsung / smdk6400 / smdk6400.c
1 /*
2 * (C) Copyright 2002
3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4 * Marius Groeger <mgroeger@sysgo.de>
5 *
6 * (C) Copyright 2002
7 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
8 *
9 * (C) Copyright 2008
10 * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
11 *
12 * See file CREDITS for list of people who contributed to this
13 * project.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 * MA 02111-1307 USA
29 */
30
31 #include <common.h>
32 #include <s3c6400.h>
33
34 /* ------------------------------------------------------------------------- */
35 #define CS8900_Tacs 0x0 /* 0clk address set-up */
36 #define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
37 #define CS8900_Tacc 0xE /* 14clk access cycle */
38 #define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
39 #define CS8900_Tah 0x4 /* 4clk address holding time */
40 #define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
41 #define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
42
43 static inline void delay(unsigned long loops)
44 {
45 __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
46 "bne 1b"
47 : "=r" (loops) : "0" (loops));
48 }
49
50 /*
51 * Miscellaneous platform dependent initialisations
52 */
53
54 static void cs8900_pre_init(void)
55 {
56 SROM_BW_REG &= ~(0xf << 4);
57 SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
58 SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
59 (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
60 (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
61 }
62
63 int board_init(void)
64 {
65 DECLARE_GLOBAL_DATA_PTR;
66
67 cs8900_pre_init();
68
69 /* NOR-flash in SROM0 */
70
71 /* Enable WAIT */
72 SROM_BW_REG |= 4 | 8 | 1;
73
74 gd->bd->bi_arch_number = MACH_TYPE;
75 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
76
77 return 0;
78 }
79
80 int dram_init(void)
81 {
82 DECLARE_GLOBAL_DATA_PTR;
83
84 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
85 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
86
87 return 0;
88 }
89
90 #ifdef CONFIG_DISPLAY_BOARDINFO
91 int checkboard(void)
92 {
93 printf("Board: SMDK6400\n");
94 return 0;
95 }
96 #endif
97
98 #ifdef CONFIG_ENABLE_MMU
99 ulong virt_to_phy_smdk6400(ulong addr)
100 {
101 if ((0xc0000000 <= addr) && (addr < 0xc8000000))
102 return addr - 0xc0000000 + 0x50000000;
103 else
104 printf("do not support this address : %08lx\n", addr);
105
106 return addr;
107 }
108 #endif
109
110 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_SYS_NAND_LEGACY)
111 #include <linux/mtd/nand.h>
112 extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
113 void nand_init(void)
114 {
115 nand_probe(CONFIG_SYS_NAND_BASE);
116 if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
117 print_size(nand_dev_desc[0].totlen, "\n");
118 }
119 #endif
120
121 ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
122 {
123 if (banknum == 0) { /* non-CFI boot flash */
124 info->portwidth = FLASH_CFI_16BIT;
125 info->chipwidth = FLASH_CFI_BY16;
126 info->interface = FLASH_CFI_X16;
127 return 1;
128 } else
129 return 0;
130 }