board/sbc2410x/sbc2410x.c

   1 /*
   2  * (C) Copyright 2002
   3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   4  * Marius Groeger <mgroeger@sysgo.de>
   5  *
   6  * (C) Copyright 2002
   7  * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
   8  *
   9  * (C) Copyright 2005
  10  * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
  11  *
  12  * See file CREDITS for list of people who contributed to this
  13  * project.
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License as
  17  * published by the Free Software Foundation; either version 2 of
  18  * the License, or (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  28  * MA 02111-1307 USA
  29  */
  30
  31 #include <common.h>
  32 #include <s3c2410.h>
  33
  34 #if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
  35 #include <linux/mtd/nand.h>
  36 #endif
  37
  38 /* ------------------------------------------------------------------------- */
  39
  40 #define FCLK_SPEED 1
  41
  42 #if FCLK_SPEED==0               /* Fout = 203MHz, Fin = 12MHz for Audio */
  43 #define M_MDIV  0xC3
  44 #define M_PDIV  0x4
  45 #define M_SDIV  0x1
  46 #elif FCLK_SPEED==1             /* Fout = 202.8MHz */
  47 #define M_MDIV  0x5c
  48 #define M_PDIV  0x4
  49 #define M_SDIV  0x0
  50 #endif
  51
  52 #define USB_CLOCK 1
  53
  54 #if USB_CLOCK==0
  55 #define U_M_MDIV        0xA1
  56 #define U_M_PDIV        0x3
  57 #define U_M_SDIV        0x1
  58 #elif USB_CLOCK==1
  59 #define U_M_MDIV        0x48
  60 #define U_M_PDIV        0x3
  61 #define U_M_SDIV        0x2
  62 #endif
  63
  64 static inline void delay (unsigned long loops)
  65 {
  66         __asm__ volatile ("1:\n"
  67                           "subs %0, %1, #1\n"
  68                           "bne 1b":"=r" (loops):"0" (loops));
  69 }
  70
  71 /*
  72  * Miscellaneous platform dependent initialisations
  73  */
  74
  75 int board_init (void)
  76 {
  77         DECLARE_GLOBAL_DATA_PTR;
  78         S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
  79         S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
  80
  81         /* to reduce PLL lock time, adjust the LOCKTIME register */
  82         clk_power->LOCKTIME = 0xFFFFFF;
  83
  84         /* configure MPLL */
  85         clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
  86
  87         /* some delay between MPLL and UPLL */
  88         delay (4000);
  89
  90         /* configure UPLL */
  91         clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
  92
  93         /* some delay between MPLL and UPLL */
  94         delay (8000);
  95
  96         /* set up the I/O ports */
  97         gpio->GPACON = 0x007FFFFF;
  98         gpio->GPBCON = 0x00044556;
  99         gpio->GPBUP = 0x000007FF;
 100         gpio->GPCCON = 0xAAAAAAAA;
 101         gpio->GPCUP = 0x0000FFFF;
 102         gpio->GPDCON = 0xAAAAAAAA;
 103         gpio->GPDUP = 0x0000FFFF;
 104         gpio->GPECON = 0xAAAAAAAA;
 105         gpio->GPEUP = 0x0000FFFF;
 106         gpio->GPFCON = 0x000055AA;
 107         gpio->GPFUP = 0x000000FF;
 108         gpio->GPGCON = 0xFF95FF3A;
 109         gpio->GPGUP = 0x0000FFFF;
 110         gpio->GPHCON = 0x0016FAAA;
 111         gpio->GPHUP = 0x000007FF;
 112
 113         gpio->EXTINT0=0x22222222;
 114         gpio->EXTINT1=0x22222222;
 115         gpio->EXTINT2=0x22222222;
 116
 117         /* arch number of SMDK2410-Board */
 118         gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
 119
 120         /* adress of boot parameters */
 121         gd->bd->bi_boot_params = 0x30000100;
 122
 123         icache_enable();
 124         dcache_enable();
 125
 126         return 0;
 127 }
 128
 129 int dram_init (void)
 130 {
 131         DECLARE_GLOBAL_DATA_PTR;
 132
 133         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 134         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 135
 136         return 0;
 137 }
 138
 139 #if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 140 extern ulong nand_probe(ulong physadr);
 141
 142 static inline void NF_Reset(void)
 143 {
 144         int i;
 145
 146         NF_SetCE(NFCE_LOW);
 147         NF_Cmd(0xFF);           /* reset command */
 148         for(i = 0; i < 10; i++);        /* tWB = 100ns. */
 149         NF_WaitRB();            /* wait 200~500us; */
 150         NF_SetCE(NFCE_HIGH);
 151 }
 152
 153 static inline void NF_Init(void)
 154 {
 155 #if 1
 156 #define TACLS   0
 157 #define TWRPH0  3
 158 #define TWRPH1  0
 159 #else
 160 #define TACLS   0
 161 #define TWRPH0  4
 162 #define TWRPH1  2
 163 #endif
 164
 165         NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
 166         /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
 167         /* 1  1    1     1,   1      xxx,  r xxx,   r xxx */
 168         /* En 512B 4step ECCR nFCE=H tACLS   tWRPH0   tWRPH1 */
 169
 170         NF_Reset();
 171 }
 172
 173 void nand_init(void)
 174 {
 175         S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
 176
 177         NF_Init();
 178 #ifdef DEBUG
 179         printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
 180 #endif
 181         printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
 182 }
 183 #endif /* CONFIG_COMMANDS & CFG_CMD_NAND */