3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX
="debug-";;
34 -h*) TEST
="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options
=$options" $i" ;;
49 # First get uname entries that we use below
51 [ "$MACHINE" ] || MACHINE
=`(uname -m) 2>/dev/null` || MACHINE
="unknown"
52 [ "$RELEASE" ] || RELEASE
=`(uname -r) 2>/dev/null` || RELEASE
="unknown"
53 [ "$SYSTEM" ] || SYSTEM
=`(uname -s) 2>/dev/null` || SYSTEM
="unknown"
54 [ "$BUILD" ] || VERSION
=`(uname -v) 2>/dev/null` || VERSION
="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL
=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc
/kconfig
]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0
*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1
*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2
*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x
[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 echo "m68k-apple-aux3"; exit 0
110 echo "${MACHINE}-ibm-aix"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix3"; exit 0
122 echo "${MACHINE}-hi-hiux"; exit 0
126 HPUXVER
=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
128 1[0-9].
*) # HPUX 10 and 11 targets are unified
129 echo "${MACHINE}-hp-hpux1x"; exit 0
132 echo "${MACHINE}-hp-hpux"; exit 0
138 echo "mips2-sgi-irix"; exit 0
142 echo "mips3-sgi-irix"; exit 0
146 echo "mips4-sgi-irix64"; exit 0
150 echo "${MACHINE}-whatever-linux2"; exit 0
154 echo "${MACHINE}-whatever-linux1"; exit 0
158 echo "hurd-x86"; exit 0;
162 echo "${MACHINE}-lynx-lynxos"; exit 0
165 BSD
/OS
:4.
*) # BSD/OS always says 386
166 echo "i486-whatever-bsdi4"; exit 0
169 BSD
/386:*:*:*486*|BSD
/OS
:*:*:*:*486*)
170 case `/sbin/sysctl -n hw.model` in
172 echo "i586-whatever-bsdi"; exit 0
175 echo "i386-whatever-bsdi"; exit 0
181 echo "${MACHINE}-whatever-bsdi"; exit 0
185 VERS
=`echo ${RELEASE} | sed -e 's/[-(].*//'`
186 MACH
=`sysctl -n hw.model`
189 *386* ) MACH
="i386" ;;
190 *486* ) MACH
="i486" ;;
191 Pentium\ II
*) MACH
="i686" ;;
192 Pentium
* ) MACH
="i586" ;;
193 * ) MACH
="$MACHINE" ;;
196 i
[0-9]86 ) ARCH
="pc" ;;
198 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
202 echo "${MACHINE}-whatever-freebsd"; exit 0
206 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
210 echo "${MACHINE}-whatever-netbsd"; exit 0
214 echo "${MACHINE}-whatever-openbsd"; exit 0
218 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
222 OSFMAJOR
=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
225 echo "${MACHINE}-dec-tru64"; exit 0
228 echo "${MACHINE}-dec-osf"; exit 0
231 echo "${MACHINE}-dec-osf"; exit 0
239 echo "${MACHINE}-whatever-qnx4"
242 echo "${MACHINE}-whatever-qnx6"
245 echo "${MACHINE}-whatever-qnx"
252 echo "i860-intel-osf1"; exit 0
256 echo "ppc-apple-rhapsody"; exit 0
262 echo "ppc-apple-darwin${VERSION}"
265 echo "i686-apple-darwin${VERSION}"
272 echo "${MACHINE}-whatever-solaris2"; exit 0
276 echo "${MACHINE}-sun-sunos4"; exit 0
280 echo "${MACHINE}-whatever-sysv4"; exit 0
284 echo "i386-stratus-vos"; exit 0
288 echo "hppa1.1-stratus-vos"; exit 0
292 echo "${MACHINE}-whatever-sysv4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
299 *:4.0:3.0:3[34]?? |
*:4.0:3.0:3[34]??
,*)
300 echo "i486-ncr-sysv4"; exit 0
304 echo "${MACHINE}-unknown-ultrix"; exit 0
308 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
312 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
316 echo "${MACHINE}-ncr-sysv4"; exit 0
320 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
324 echo "${MACHINE}-whatever-mingw"; exit 0;
329 echo "${MACHINE}-whatever-cygwin_pre1.3"
332 echo "${MACHINE}-whatever-cygwin"
339 echo "${MACHINE}-whatever-vxworks"; exit 0;
344 # Ugg. These are all we can determine by what we know about
345 # the output of uname. Be more creative:
348 # Do the Apollo stuff first. Here, we just simply assume
349 # that the existence of the /usr/apollo directory is proof
351 if [ -d /usr
/apollo
]; then
352 echo "whatever-apollo-whatever"
357 ISNEXT
=`hostinfo 2>/dev/null`
360 echo "whatever-next-nextstep3.3"; exit 0
363 echo "whatever-next-nextstep"; exit 0
367 # At this point we gone through all the one's
370 echo "${MACHINE}-whatever-${SYSTEM}"
374 # ---------------------------------------------------------------------------
375 # this is where the translation occurs into SSLeay terms
376 # ---------------------------------------------------------------------------
378 # Only set CC if not supplied already
379 if [ -z "$CROSS_COMPILE$CC" ]; then
380 GCCVER
=`sh -c "gcc -dumpversion" 2>/dev/null`
381 if [ "$GCCVER" != "" ]; then
382 # then strip off whatever prefix egcs prepends the number with...
383 # Hopefully, this will work for any future prefixes as well.
384 GCCVER
=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
385 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
386 # does give us what we want though, so we use that. We just just the
387 # major and minor version numbers.
388 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
389 GCCVER
=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
396 if [ "$SYSTEM" = "HP-UX" ];then
397 # By default gcc is a ILP32 compiler (with long long == 64).
399 if [ $GCCVER -ge 30 ]; then
400 # PA64 support only came in with gcc 3.0.x.
401 # We check if the preprocessor symbol __LP64__ is defined...
402 if echo "__LP64__" | gcc
-v -E -x c
- 2>/dev
/null |
grep "^__LP64__" 2>&1 > /dev
/null
; then
403 : # __LP64__ has slipped through, it therefore is not defined
409 if [ "$SYSTEM" = "SunOS" ]; then
410 if [ $GCCVER -ge 30 ]; then
411 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
412 # to be working, at the very least 'make test' passes...
413 if gcc
-v -E -x c
/dev
/null
2>&1 |
grep __arch64__
> /dev
/null
; then
419 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
420 CCVER
=`(cc -V 2>&1) 2>/dev/null | \
421 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
422 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
424 if [ $MACHINE != i86pc
-a $CCVER -gt 40 ]; then
425 CC
=cc
# overrides gcc!!!
426 if [ $CCVER -eq 50 ]; then
427 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
428 echo " patch #107357-01 or later applied."
434 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
435 # check for Compaq C, expected output is "blah-blah C Vx.x"
436 CCCVER
=`(ccc -V 2>&1) 2>/dev/null | \
437 egrep -e '.* C V[0-9]\.[0-9]' | \
438 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
440 if [ $CCCVER -gt 60 ]; then
441 CC
=ccc
# overrides gcc!!! well, ccc outperforms inoticeably
442 # only on hash routines and des, otherwise gcc (2.95)
443 # keeps along rather tight...
447 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
448 (cc
) 2>&1 |
grep -iv "not found" > /dev
/null
&& CC
=cc
453 # read the output of the embedded GuessOS
456 echo Operating system
: $GUESSOS
458 # now map the output into SSLeay terms ... really should hack into the
459 # script above so we end up with values in vars but that would take
460 # more time that I want to waste at the moment
469 CPU
=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
471 if [ $CPU -ge 4000 ]; then
472 options
="$options -mips2"
477 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
479 #if [ $CPU -ge 5000 ]; then
480 # options="$options -mips4"
482 # options="$options -mips3"
487 echo "WARNING! If you wish to build 64-bit library, then you have to"
488 echo " invoke './Configure irix64-mips4-$CC' *manually*."
489 if [ "$TEST" = "false" -a -t 1 ]; then
490 echo " You have about 5 seconds to press Ctrl-C to abort."
491 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
493 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
495 #if [ $CPU -ge 5000 ]; then
496 # options="$options -mips4"
498 # options="$options -mips3"
502 ppc-apple-rhapsody
) OUT
="rhapsody-ppc-cc" ;;
504 ISA64
=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
505 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
506 echo "WARNING! If you wish to build 64-bit library, then you have to"
507 echo " invoke './Configure darwin64-ppc-cc' *manually*."
508 if [ "$TEST" = "false" -a -t 1 ]; then
509 echo " You have about 5 seconds to press Ctrl-C to abort."
510 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
513 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
514 OUT
="darwin64-ppc-cc"
519 ISA64
=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
520 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
521 echo "WARNING! If you wish to build 64-bit library, then you have to"
522 echo " invoke './Configure darwin64-x86_64-cc' *manually*."
523 if [ "$TEST" = "false" -a -t 1 ]; then
524 echo " You have about 5 seconds to press Ctrl-C to abort."
525 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
528 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
529 OUT
="darwin64-x86_64-cc"
534 options
="$options -arch%20armv6 -arch%20armv7"
535 OUT
="iphoneos-cross" ;;
537 options
="$options -arch%20${MACHINE}"
538 OUT
="iphoneos-cross" ;;
539 arm64-
*-iphoneos|
*-*-ios64)
542 ISA
=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
543 case ${ISA:-generic} in
544 *[678]) OUT
="linux-alpha+bwx-$CC" ;;
545 *) OUT
="linux-alpha-$CC" ;;
547 if [ "$CC" = "gcc" ]; then
548 case ${ISA:-generic} in
549 EV5|EV45
) options
="$options -mcpu=ev5";;
550 EV56|PCA56
) options
="$options -mcpu=ev56";;
551 *) options
="$options -mcpu=ev6";;
556 if [ -z "$KERNEL_BITS" ]; then
557 echo "WARNING! If you wish to build 64-bit library, then you have to"
558 echo " invoke './Configure linux-ppc64' *manually*."
559 if [ "$TEST" = "false" -a -t 1 ]; then
560 echo " You have about 5 seconds to press Ctrl-C to abort."
561 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
564 if [ "$KERNEL_BITS" = "64" ]; then
568 (echo "__LP64__" | gcc
-E -x c
- 2>/dev
/null |
grep "^__LP64__" 2>&1 > /dev
/null
) || options
="$options -m32"
571 ppc64le-
*-linux2) OUT
="linux-ppc64le" ;;
572 ppc-
*-linux2) OUT
="linux-ppc" ;;
574 echo "WARNING! If you wish to build 64-bit library, then you have to"
575 echo " invoke './Configure linux64-mips64' *manually*."
576 if [ "$TEST" = "false" -a -t 1 ]; then
577 echo " You have about 5 seconds to press Ctrl-C to abort."
578 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
582 mips
*-*-linux2) OUT
="linux-mips32" ;;
583 ppc60x-
*-vxworks*) OUT
="vxworks-ppc60x" ;;
584 ppcgen-
*-vxworks*) OUT
="vxworks-ppcgen" ;;
585 pentium-
*-vxworks*) OUT
="vxworks-pentium" ;;
586 simlinux-
*-vxworks*) OUT
="vxworks-simlinux" ;;
587 mips-
*-vxworks*) OUT
="vxworks-mips";;
588 ia64-
*-linux?
) OUT
="linux-ia64" ;;
590 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
591 echo " and wish to build 64-bit library, then you have to"
592 echo " invoke './Configure linux64-sparcv9' *manually*."
593 if [ "$TEST" = "false" -a -t 1 ]; then
594 echo " You have about 5 seconds to press Ctrl-C to abort."
595 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
597 OUT
="linux-sparcv9" ;;
599 KARCH
=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
600 case ${KARCH:-sun4} in
601 sun4u
*) OUT
="linux-sparcv9" ;;
602 sun4m
) OUT
="linux-sparcv8" ;;
603 sun4d
) OUT
="linux-sparcv8" ;;
604 *) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
607 # 64-bit builds under parisc64 linux are not supported and
608 # compiler is expected to generate 32-bit objects...
609 CPUARCH
=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
610 CPUSCHEDULE
=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
612 # ??TODO ?? Model transformations
613 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
614 # assuming no further arch. identification will ever be used by GCC.
615 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
616 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
617 # for these chips in the future.
618 # PA7300LC -> 7100LC (1.1)
619 # PA8200 -> 8000 (2.0)
620 # PA8500 -> 8000 (2.0)
621 # PA8600 -> 8000 (2.0)
623 CPUSCHEDULE
=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
624 # Finish Model transformations
626 options
="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
627 OUT
="linux-generic32" ;;
628 armv
[1-3]*-*-linux2) OUT
="linux-generic32" ;;
629 armv
[7-9]*-*-linux2) OUT
="linux-armv4"; options
="$options -march=armv7-a" ;;
630 arm
*-*-linux2) OUT
="linux-armv4" ;;
631 aarch64-
*-linux2) OUT
="linux-aarch64" ;;
632 sh
*b-
*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
633 sh
*-*-linux2) OUT
="linux-generic32"; options
="$options -DL_ENDIAN" ;;
634 m68k
*-*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
635 s390-
*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
637 # To be uncommented when glibc bug is fixed, see Configure...
638 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
639 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
640 # echo " have to invoke './Configure linux32-s390x' *manually*."
641 # if [ "$TEST" = "false" -a -t -1 ]; then
642 # echo " You have about 5 seconds to press Ctrl-C to abort."
643 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
648 x86_64-
*-linux?
) OUT
="linux-x86_64" ;;
649 *86-*-linux2) OUT
="linux-elf"
650 if [ "$GCCVER" -gt 28 ]; then
651 if grep '^model.*Pentium' /proc
/cpuinfo
>/dev
/null
; then
652 options
="$options -march=pentium"
654 if grep '^model.*Pentium Pro' /proc
/cpuinfo
>/dev
/null
; then
655 options
="$options -march=pentiumpro"
657 if grep '^model.*K6' /proc
/cpuinfo
>/dev
/null
; then
658 options
="$options -march=k6"
661 *-*-linux1) OUT
="linux-aout" ;;
662 *-*-linux2) OUT
="linux-generic32" ;;
663 sun4
[uv
]*-*-solaris2)
664 OUT
="solaris-sparcv9-$CC"
665 ISA64
=`(isalist) 2>/dev/null | grep sparcv9`
666 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
667 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
668 echo "WARNING! If you wish to build 64-bit library, then you have to"
669 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
670 if [ "$TEST" = "false" -a -t 1 ]; then
671 echo " You have about 5 seconds to press Ctrl-C to abort."
672 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
674 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
675 # $GCC_ARCH denotes default ABI chosen by compiler driver
676 # (first one found on the $PATH). I assume that user
677 # expects certain consistency with the rest of his builds
678 # and therefore switch over to 64-bit. <appro>
679 OUT
="solaris64-sparcv9-gcc"
680 echo "WARNING! If you wish to build 32-bit library, then you have to"
681 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
682 if [ "$TEST" = "false" -a -t 1 ]; then
683 echo " You have about 5 seconds to press Ctrl-C to abort."
684 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
686 elif [ "$GCC_ARCH" = "-m32" ]; then
687 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
688 echo " and wish to build 64-bit library, then you have to"
689 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
690 if [ "$TEST" = "false" -a -t 1 ]; then
691 echo " You have about 5 seconds to press Ctrl-C to abort."
692 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
696 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
697 OUT
="solaris64-sparcv9-$CC"
700 sun4m-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
701 sun4d-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
702 sun4
*-*-solaris2) OUT
="solaris-sparcv7-$CC" ;;
704 ISA64
=`(isalist) 2>/dev/null | grep amd64`
705 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
706 OUT
="solaris64-x86_64-$CC"
708 OUT
="solaris-x86-$CC"
709 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
710 options
="$options no-sse2"
714 *-*-sunos4) OUT
="sunos-$CC" ;;
716 *86*-*-bsdi4) OUT
="BSD-x86-elf"; options
="$options no-sse2 -ldl" ;;
717 alpha
*-*-*bsd
*) OUT
="BSD-generic64"; options
="$options -DL_ENDIAN" ;;
718 powerpc64-
*-*bsd
*) OUT
="BSD-generic64"; options
="$options -DB_ENDIAN" ;;
719 sparc64-
*-*bsd
*) OUT
="BSD-sparc64" ;;
720 ia64-
*-*bsd
*) OUT
="BSD-ia64" ;;
721 amd64-
*-*bsd
*) OUT
="BSD-x86_64" ;;
722 *86*-*-*bsd
*) # mimic ld behaviour when it's looking for libc...
723 if [ -L /usr
/lib
/libc.so
]; then # [Free|Net]BSD
724 libc
=/usr
/lib
/libc.so
726 # ld searches for highest libc.so.* and so do we
727 libc
=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
729 case "`(file -L $libc) 2>/dev/null`" in
730 *ELF
*) OUT
="BSD-x86-elf" ;;
731 *) OUT
="BSD-x86"; options
="$options no-sse2" ;;
733 *-*-*bsd
*) OUT
="BSD-generic32" ;;
735 *-*-osf) OUT
="osf1-alpha-cc" ;;
736 *-*-tru64) OUT
="tru64-alpha-cc" ;;
738 if [ "$CC" = "gcc" ]; then
739 OUT
="unixware-7-gcc" ; options
="$options no-sse2"
741 OUT
="unixware-7" ; options
="$options no-sse2 -D__i386__"
744 *-*-[Uu
]nix
[Ww
]are20
*) OUT
="unixware-2.0"; options
="$options no-sse2 no-sha512" ;;
745 *-*-[Uu
]nix
[Ww
]are21
*) OUT
="unixware-2.1"; options
="$options no-sse2 no-sha512" ;;
747 options
="$options no-threads no-shared no-asm no-dso"
750 BS2000-siemens-sysv4
) OUT
="BS2000-OSD" ;;
752 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
753 OUT
="hpux64-parisc2-gcc"
755 [ "$KERNEL_BITS" ] || KERNEL_BITS
=`(getconf KERNEL_BITS) 2>/dev/null`
756 KERNEL_BITS
=${KERNEL_BITS:-32}
757 CPU_VERSION
=`(getconf CPU_VERSION) 2>/dev/null`
758 CPU_VERSION
=${CPU_VERSION:-0}
759 # See <sys/unistd.h> for further info on CPU_VERSION.
760 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
761 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
766 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
767 OUT
=${OUT:-"hpux-parisc2-${CC}"}
768 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
769 echo "WARNING! If you wish to build 64-bit library then you have to"
770 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
771 if [ "$TEST" = "false" -a -t 1 ]; then
772 echo " You have about 5 seconds to press Ctrl-C to abort."
773 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
776 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
777 OUT
="hpux-parisc-${CC}"
778 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
779 OUT
="hpux-parisc-${CC}"
780 else # Motorola(?) CPU
783 options
="$options -D_REENTRANT" ;;
784 *-hpux) OUT
="hpux-parisc-$CC" ;;
786 [ "$KERNEL_BITS" ] || KERNEL_BITS
=`(getconf KERNEL_BITMODE) 2>/dev/null`
787 KERNEL_BITS
=${KERNEL_BITS:-32}
788 OBJECT_MODE
=${OBJECT_MODE:-32}
789 if [ "$CC" = "gcc" ]; then
791 if [ $OBJECT_MODE -eq 64 ]; then
792 echo 'Your $OBJECT_MODE was found to be set to 64'
795 elif [ $OBJECT_MODE -eq 64 ]; then
796 echo 'Your $OBJECT_MODE was found to be set to 64'
800 if [ $KERNEL_BITS -eq 64 ]; then
801 echo "WARNING! If you wish to build 64-bit kit, then you have to"
802 echo " invoke './Configure aix64-cc' *manually*."
803 if [ "$TEST" = "false" -a -t 1 ]; then
804 echo " You have ~5 seconds to press Ctrl-C to abort."
805 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
809 if (lsattr
-E -O -l `lsdev -c processor|awk '{print$1;exit}'` |
grep -i powerpc
) >/dev
/null
2>&1; then
810 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
812 options
="$options no-asm"
815 # these are all covered by the catchall below
816 *-*-cygwin_pre1.3
) OUT
="Cygwin-pre1.3" ;;
817 *-*-cygwin) OUT
="Cygwin" ;;
818 x86pc-
*-qnx6) OUT
="QNX6-i386" ;;
819 *-*-qnx6) OUT
="QNX6" ;;
820 x86-
*-android|i?
86-*-android) OUT
="android-x86" ;;
821 armv
[7-9]*-*-android) OUT
="android-armv7" ;;
822 *) OUT
=`echo $GUESSOS | awk -F- '{print $3}'`;;
825 # NB: This atalla support has been superseded by the ENGINE support
826 # That contains its own header and definitions anyway. Support can
827 # be enabled or disabled on any supported platform without external
828 # headers, eg. by adding the "hw-atalla" switch to ./config or
831 # See whether we can compile Atalla support
832 #if [ -f /usr/include/atasi.h ]
834 # options="$options -DATALLA"
837 if [ -n "$CONFIG_OPTIONS" ]; then
838 options
="$options $CONFIG_OPTIONS"
841 if expr "$options" : '.*no\-asm' > /dev
/null
; then :; else
842 sh
-c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
843 grep \\--noexecstack >/dev
/null
&& \
844 options
="$options -Wa,--noexecstack"
847 # gcc < 2.8 does not support -march=ultrasparc
848 if [ "$OUT" = solaris-sparcv9-gcc
-a $GCCVER -lt 28 ]
850 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
851 echo " Upgrade to gcc-2.8 or later."
853 OUT
=solaris-sparcv8-gcc
855 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
857 echo "WARNING! Falling down to 'linux-sparcv8'."
858 echo " Upgrade to gcc-2.8 or later."
864 i386-
*) options
="$options 386" ;;
867 for i
in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
869 if [ ! -d crypto
/$i ]
871 options
="$options no-$i"
875 # Discover Kerberos 5 (since it's still a prototype, we don't
876 # do any guesses yet, that's why this section is commented away.
877 #if [ -d /usr/kerberos ]; then
878 # krb5_dir=/usr/kerberos
879 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
880 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
881 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
882 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
883 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
884 # options="$options --with-krb5-flavor=MIT"
886 #elif [ -d /usr/heimdal ]; then
887 # krb5_dir=/usr/heimdal
888 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
889 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
890 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
891 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
892 # options="$options --with-krb5-flavor=Heimdal"
896 if [ -z "$OUT" ]; then
900 if [ ".$PERL" = .
] ; then
901 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
902 if [ -f "$i/perl5$EXE" ] ; then
909 if [ ".$PERL" = .
] ; then
910 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
911 if [ -f "$i/perl$EXE" ] ; then
912 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
920 if [ ".$PERL" = .
] ; then
921 echo "You need Perl 5."
925 # run Configure to check to see if we need to specify the
926 # compiler for the platform ... in which case we add it on
927 # the end ... otherwise we leave it off
929 $PERL .
/Configure LIST |
grep "$OUT-$CC" > /dev
/null
930 if [ $?
= "0" ]; then
936 $PERL .
/Configure LIST |
grep "$OUT" > /dev
/null
937 if [ $?
= "0" ]; then
938 echo Configuring
for $OUT
940 if [ "$TEST" = "true" ]; then
941 echo $PERL .
/Configure
$OUT $options
943 $PERL .
/Configure
$OUT $options
946 echo "This system ($OUT) is not supported. See file INSTALL for details."