cpu/arm720t/serial_netarm.c

   1 /*
   2  * Serial Port stuff - taken from Linux
   3  *
   4  * (C) Copyright 2002
   5  * MAZeT GmbH <www.mazet.de>
   6  * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
   7  *
   8  * (c) 2004
   9  * IMMS gGmbH <www.imms.de>
  10  * Thomas Elste <info@elste.org>
  11  *
  12  * See file CREDITS for list of people who contributed to this
  13  * project.
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  28  *
  29  */
  30
  31 #include <common.h>
  32
  33 #ifdef CONFIG_NETARM
  34
  35 #include <asm/hardware.h>
  36
  37 DECLARE_GLOBAL_DATA_PTR;
  38
  39 #define PORTA   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
  40 #if !defined(CONFIG_NETARM_NS7520)
  41 #define PORTB   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
  42 #else
  43 #define PORTC   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC))
  44 #endif
  45
  46 /* wait until transmitter is ready for another character */
  47 #define TXWAITRDY(registers)                                                    \
  48 {                                                                               \
  49         ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ;                                   \
  50         while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) {       \
  51                 if (get_timer(0) > tmo)                                         \
  52                         break;                                                  \
  53         }                                                                       \
  54 }
  55
  56
  57 #ifndef CONFIG_UART1_CONSOLE
  58 volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
  59 volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
  60 #else
  61 volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(1);
  62 volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(0);
  63 #endif
  64
  65 extern void _netarm_led_FAIL1(void);
  66
  67 /*
  68  * Setup both serial i/f with given baudrate
  69  */
  70 void serial_setbrg (void)
  71 {
  72         /* set 0 ... make sure pins are configured for serial */
  73 #if !defined(CONFIG_NETARM_NS7520)
  74         PORTA = PORTB =
  75                 NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
  76 #else
  77         PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
  78         PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
  79 #endif
  80
  81         /* first turn em off */
  82         serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
  83
  84         /* clear match register, we don't need it */
  85         serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
  86
  87         /* setup bit rate generator and rx buffer gap timer (1 byte only) */
  88         if ((gd->baudrate >= MIN_BAUD_RATE)
  89             && (gd->baudrate <= MAX_BAUD_RATE)) {
  90                 serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
  91                         NETARM_SER_BR_X16 (gd->baudrate);
  92                 serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
  93                         0;
  94                 serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
  95                         NETARM_SER_RXGAP (gd->baudrate);
  96         } else {
  97                 hang ();
  98         }
  99
 100         /* setup port mode */
 101         serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
 102                 ( NETARM_SER_CTLB_RCGT_EN |
 103                   NETARM_SER_CTLB_UART_MODE);
 104         serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
 105                 ( NETARM_SER_CTLA_ENABLE |
 106                   NETARM_SER_CTLA_P_NONE |
 107                   /* see errata */
 108                   NETARM_SER_CTLA_2STOP |
 109                   NETARM_SER_CTLA_8BITS |
 110                   NETARM_SER_CTLA_DTR_EN |
 111                   NETARM_SER_CTLA_RTS_EN);
 112 }
 113
 114
 115 /*
 116  * Initialise the serial port with the given baudrate. The settings
 117  * are always 8 data bits, no parity, 1 stop bit, no start bits.
 118  */
 119 int serial_init (void)
 120 {
 121         serial_setbrg ();
 122         return 0;
 123 }
 124
 125
 126 /*
 127  * Output a single byte to the serial port.
 128  */
 129 void serial_putc (const char c)
 130 {
 131         volatile unsigned char *fifo;
 132
 133         /* If \n, also do \r */
 134         if (c == '\n')
 135                 serial_putc ('\r');
 136
 137         fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
 138         TXWAITRDY (serial_reg_ch1);
 139         *fifo = c;
 140 }
 141
 142 /*
 143  * Test of a single byte from the serial port. Returns 1 on success, 0
 144  * otherwise.
 145  */
 146 int serial_tstc(void)
 147 {
 148         return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
 149 }
 150
 151 /*
 152  * Read a single byte from the serial port. Returns 1 on success, 0
 153  * otherwise.
 154  */
 155 int serial_getc (void)
 156 {
 157         unsigned int ch_uint;
 158         volatile unsigned int *fifo;
 159         volatile unsigned char *fifo_char = NULL;
 160         int buf_count = 0;
 161
 162         while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
 163                 /* NOP */ ;
 164
 165         fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
 166         fifo_char = (unsigned char *) &ch_uint;
 167         ch_uint = *fifo;
 168
 169         buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
 170         switch (buf_count) {
 171         case NETARM_SER_STATA_RXFDB_4BYTES:
 172                 buf_count = 4;
 173                 break;
 174         case NETARM_SER_STATA_RXFDB_3BYTES:
 175                 buf_count = 3;
 176                 break;
 177         case NETARM_SER_STATA_RXFDB_2BYTES:
 178                 buf_count = 2;
 179                 break;
 180         case NETARM_SER_STATA_RXFDB_1BYTES:
 181                 buf_count = 1;
 182                 break;
 183         default:
 184                 /* panic, be never here */
 185                 break;
 186         }
 187
 188         serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
 189
 190         return ch_uint & 0xff;
 191 }
 192
 193 void serial_puts (const char *s)
 194 {
 195         while (*s) {
 196                 serial_putc (*s++);
 197         }
 198 }
 199
 200 #endif /* CONFIG_NETARM */