cpu/arm920t/at91rm9200/i2c.c

   1 /*
   2  *  i2c Support for Atmel's AT91RM9200 Two-Wire Interface
   3  *
   4  *  (c) Rick Bronson
   5  *
   6  *  Borrowed heavily from original work by:
   7  *  Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
   8  *
   9  *  Modified to work with u-boot by (C) 2004 Gary Jennejohn garyj@denx.de
  10  *
  11  *  This program is free software; you can redistribute it and/or modify
  12  *  it under the terms of the GNU General Public License as published by
  13  *  the Free Software Foundation; either version 2 of the License, or
  14  *  (at your option) any later version.
  15  *
  16  *  This program is distributed in the hope that it will be useful,
  17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *  GNU General Public License for more details.
  20  *
  21  *  You should have received a copy of the GNU General Public License
  22  *  along with this program; if not, write to the Free Software
  23  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25 */
  26 #include <common.h>
  27
  28 #ifdef CONFIG_HARD_I2C
  29
  30 #include <i2c.h>
  31 #include <asm/io.h>
  32 #include <asm/arch/hardware.h>
  33
  34 #include <at91rm9200_i2c.h>
  35
  36 /* define DEBUG */
  37
  38 /*
  39  * Poll the i2c status register until the specified bit is set.
  40  * Returns 0 if timed out (100 msec)
  41  */
  42 static short at91_poll_status(AT91PS_TWI twi, unsigned long bit) {
  43         int loop_cntr = 10000;
  44         do {
  45                 udelay(10);
  46         } while (!(twi->TWI_SR & bit) && (--loop_cntr > 0));
  47
  48         return (loop_cntr > 0);
  49 }
  50
  51 /*
  52  * Generic i2c master transfer entrypoint
  53  *
  54  * rw == 1 means that this is a read
  55  */
  56 static int
  57 at91_xfer(unsigned char chip, unsigned int addr, int alen,
  58                                                 unsigned char *buffer, int len, int rw)
  59 {
  60         AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
  61         int length;
  62         unsigned char *buf;
  63         /* Set the TWI Master Mode Register */
  64         twi->TWI_MMR = (chip << 16) | (alen << 8)
  65                 | ((rw == 1) ? AT91C_TWI_MREAD : 0);
  66
  67         /* Set TWI Internal Address Register with first messages data field */
  68         if (alen > 0)
  69                 twi->TWI_IADR = addr;
  70
  71         length = len;
  72         buf = buffer;
  73         if (length && buf) {    /* sanity check */
  74                 if (rw) {
  75                         twi->TWI_CR = AT91C_TWI_START;
  76                         while (length--) {
  77                                 if (!length)
  78                                         twi->TWI_CR = AT91C_TWI_STOP;
  79                                 /* Wait until transfer is finished */
  80                                 if (!at91_poll_status(twi, AT91C_TWI_RXRDY)) {
  81                                         debug ("at91_i2c: timeout 1\n");
  82                                         return 1;
  83                                 }
  84                                 *buf++ = twi->TWI_RHR;
  85                         }
  86                         if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
  87                                 debug ("at91_i2c: timeout 2\n");
  88                                 return 1;
  89                         }
  90                 } else {
  91                         twi->TWI_CR = AT91C_TWI_START;
  92                         while (length--) {
  93                                 twi->TWI_THR = *buf++;
  94                                 if (!length)
  95                                         twi->TWI_CR = AT91C_TWI_STOP;
  96                                 if (!at91_poll_status(twi, AT91C_TWI_TXRDY)) {
  97                                         debug ("at91_i2c: timeout 3\n");
  98                                         return 1;
  99                                 }
 100                         }
 101                         /* Wait until transfer is finished */
 102                         if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
 103                                 debug ("at91_i2c: timeout 4\n");
 104                                 return 1;
 105                         }
 106                 }
 107         }
 108         return 0;
 109 }
 110
 111 int
 112 i2c_probe(unsigned char chip)
 113 {
 114         unsigned char buffer[1];
 115
 116         return at91_xfer(chip, 0, 0, buffer, 1, 1);
 117 }
 118
 119 int
 120 i2c_read (unsigned char chip, unsigned int addr, int alen,
 121           unsigned char *buffer, int len)
 122 {
 123 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 124         /* we only allow one address byte */
 125         if (alen > 1)
 126                 return 1;
 127         /* XXX assume an ATMEL AT24C16 */
 128         if (alen == 1) {
 129 #if 0 /* EEPROM code already sets this correctly */
 130                 chip |= (addr >> 8) & 0xff;
 131 #endif
 132                 addr = addr & 0xff;
 133         }
 134 #endif
 135         return at91_xfer(chip, addr, alen, buffer, len, 1);
 136 }
 137
 138 int
 139 i2c_write(unsigned char chip, unsigned int addr, int alen,
 140           unsigned char *buffer, int len)
 141 {
 142 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 143         int i;
 144         unsigned char *buf;
 145
 146         /* we only allow one address byte */
 147         if (alen > 1)
 148                 return 1;
 149         /* XXX assume an ATMEL AT24C16 */
 150         if (alen == 1) {
 151                 buf = buffer;
 152                 /* do single byte writes */
 153                 for (i = 0; i < len; i++) {
 154 #if 0 /* EEPROM code already sets this correctly */
 155                         chip |= (addr >> 8) & 0xff;
 156 #endif
 157                         addr = addr & 0xff;
 158                         if (at91_xfer(chip, addr, alen, buf++, 1, 0))
 159                                 return 1;
 160                         addr++;
 161                 }
 162                 return 0;
 163         }
 164 #endif
 165         return at91_xfer(chip, addr, alen, buffer, len, 0);
 166 }
 167
 168 /*
 169  * Main initialization routine
 170  */
 171 void
 172 i2c_init(int speed, int slaveaddr)
 173 {
 174         AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
 175
 176         *AT91C_PIOA_PDR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
 177         *AT91C_PIOA_ASR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
 178         *AT91C_PIOA_MDER = AT91C_PA25_TWD | AT91C_PA26_TWCK;
 179         *AT91C_PMC_PCER = 1 << AT91C_ID_TWI;            /* enable peripheral clock */
 180
 181         twi->TWI_IDR = 0x3ff;                           /* Disable all interrupts */
 182         twi->TWI_CR = AT91C_TWI_SWRST;                  /* Reset peripheral */
 183         twi->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; /* Set Master mode */
 184
 185         /* Here, CKDIV = 1 and CHDIV=CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
 186         twi->TWI_CWGR = AT91C_TWI_CKDIV1 | AT91C_TWI_CLDIV3 | (AT91C_TWI_CLDIV3 << 8);
 187
 188         debug ("Found AT91 i2c\n");
 189         return;
 190 }
 191
 192 uchar i2c_reg_read(uchar i2c_addr, uchar reg)
 193 {
 194         unsigned char buf;
 195
 196         i2c_read(i2c_addr, reg, 1, &buf, 1);
 197
 198         return(buf);
 199 }
 200
 201 void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
 202 {
 203         i2c_write(i2c_addr, reg, 1, &val, 1);
 204 }
 205
 206 int i2c_set_bus_speed(unsigned int speed)
 207 {
 208         return -1;
 209 }
 210
 211 unsigned int i2c_get_bus_speed(void)
 212 {
 213         return CONFIG_SYS_I2C_SPEED;
 214 }
 215
 216 #endif /* CONFIG_HARD_I2C */