doc/help/ref-cupsd-conf.html.in

   1 <HTML>
   2 <!-- SECTION: References -->
   3 <HEAD>
   4         <TITLE>cupsd.conf</TITLE>
   5         <LINK REL="STYLESHEET" TYPE="text/css" HREF="../cups-printable.css">
   6 </HEAD>
   7 <BODY>
   8
   9 <H1 CLASS="title">cupsd.conf</H1>
  10
  11 <P>The <VAR>/etc/cups/cupsd.conf</VAR> file contains
  12 configuration <I>directives</I> that control how the server
  13 functions. Each directive is listed on a line by itself followed
  14 by its value. Comments are introduced using the number sign ("#")
  15 character at the beginning of a line.</P>
  16
  17 <P>Since the server configuration file consists of plain text,
  18 you can use your favorite text editor to make changes to it.
  19 After making any changes, restart the <CODE>cupsd(8)</CODE>
  20 process using the startup script for your operating system:</P>
  21
  22 <UL>
  23
  24         <LI>AIX, Linux, Solaris:
  25         <PRE CLASS="command">
  26 /etc/init.d/cups restart
  27         </PRE></LI>
  28
  29         <LI>HP-UX:
  30         <PRE CLASS="command">
  31 /sbin/init.d/cups restart
  32         </PRE></LI>
  33
  34         <LI>MacOS X:
  35         <PRE CLASS="command">
  36 sudo launchctl unload /System/Library/LaunchDaemons/org.cups.cupsd.plist
  37 sudo launchctl load /System/Library/LaunchDaemons/org.cups.cupsd.plist
  38         </PRE></LI>
  39
  40 </UL>
  41
  42 <P>You can also edit this file from the CUPS web interface, which
  43 automatically handles restarting the scheduler.</P>
  44
  45 <BLOCKQUOTE><B>Note:</B>
  46
  47 <P>The specification of time units ("w" for weeks, "h" for hours, etc.) in the various time interval directives is new in CUPS 1.6/OS X 10.8. Prior releases of CUPS only supported time intervals in seconds.</P>
  48
  49 </BLOCKQUOTE>
  50
  51
  52 <H2 CLASS="title"><A NAME="AccessLog">AccessLog</A></H2>
  53
  54 <H3>Examples</H3>
  55
  56 <PRE CLASS="command">
  57 AccessLog /var/log/cups/access_log
  58 AccessLog /var/log/cups/access_log-%s
  59 AccessLog syslog
  60 </PRE>
  61
  62 <H3>Description</H3>
  63
  64 <P>The <CODE>AccessLog</CODE> directive sets the name of the
  65 access log file. If the filename is not absolute then it is
  66 assumed to be relative to the <A
  67 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
  68 access log file is stored in "common log format" and can be used
  69 by any web access reporting tool to generate a report on CUPS
  70 server activity.</P>
  71
  72 <P>The server name can be included in the filename by using
  73 <CODE>%s</CODE> in the name.</P>
  74
  75 <P>The special name "syslog" can be used to send the access
  76 information to the system log instead of a plain file.</P>
  77
  78 <P>The default access log file is
  79 <VAR>@CUPS_LOGDIR@/access_log</VAR>.</P>
  80
  81
  82 <H2 CLASS="title"><A NAME="AccessLogLevel">AccessLogLevel</A></H2>
  83
  84 <H3>Examples</H3>
  85
  86 <PRE CLASS="command">
  87 AccessLogLevel config
  88 AccessLogLevel actions
  89 AccessLogLevel all
  90 </PRE>
  91
  92 <H3>Description</H3>
  93
  94 <P>The <CODE>AccessLogLevel</CODE> directive controls which requests are logged
  95 to the access log file. The following levels are defined:</P>
  96
  97 <UL>
  98
  99         <LI><CODE>config</CODE>; Log when printers and classes are added,
 100         deleted, or modified and when configuration files are accessed or
 101         updated.</LI>
 102
 103         <LI><CODE>actions</CODE>; Log when print jobs are submitted,
 104         held, released, modified, or canceled, and any of the conditions
 105         for <CODE>config</CODE>.</LI>
 106
 107         <LI><CODE>all</CODE>; Log all requests.</LI>
 108
 109 </UL>
 110
 111 <P>The default access log level is <CODE>@CUPS_ACCESS_LOG_LEVEL@</CODE>.</P>
 112
 113
 114 <H2 CLASS="title"><A NAME="Allow">Allow</A></H2>
 115
 116 <H3>Examples</H3>
 117
 118 <PRE CLASS="command">
 119 &lt;Location /path&gt;
 120   ...
 121   Allow from All
 122   Allow from None
 123   Allow from *.example.com
 124   Allow from .example.com
 125   Allow from host.example.com
 126   Allow from nnn.*
 127   Allow from nnn.nnn.*
 128   Allow from nnn.nnn.nnn.*
 129   Allow from nnn.nnn.nnn.nnn
 130   Allow from nnn.nnn.nnn.nnn/mm
 131   Allow from nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
 132   Allow from [xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]
 133   Allow from [xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]/mmm
 134   Allow from @LOCAL
 135   Allow from @IF(name)
 136 &lt;/Location&gt;
 137 </PRE>
 138
 139 <H3>Description</H3>
 140
 141 <P>The <CODE>Allow</CODE> directive specifies a hostname, IP
 142 address, or network that is allowed access to the server.
 143 <CODE>Allow</CODE> directives are cumulative, so multiple
 144 <CODE>Allow</CODE> directives can be used to allow access for
 145 multiple hosts or networks.</P>
 146
 147 <P>Host and domain name matching require that you enable the <A
 148 HREF="#HostNameLookups"><CODE>HostNameLookups</CODE></A>
 149 directive.</P>
 150
 151 <P>The <CODE>/mm</CODE> notation specifies a CIDR netmask, as shown in
 152 <A HREF="#TABLE1">Table 1</A>.</P>
 153
 154 <DIV CLASS="table"><TABLE SUMMARY="CIDR Netmasks">
 155 <CAPTION>Table 1: <A NAME="TABLE1">CIDR Netmasks</A></CAPTION>
 156 <TR>
 157         <TH WIDTH="10%">mm</TH>
 158         <TH WIDTH="20%">netmask</TH>
 159         <TH WIDTH="10%">mm</TH>
 160         <TH WIDTH="20%">netmask</TH>
 161 </TR>
 162 <TR>
 163         <TD ALIGN="CENTER">0</TD>
 164         <TD ALIGN="CENTER">0.0.0.0</TD>
 165         <TD ALIGN="CENTER">8</TD>
 166         <TD ALIGN="CENTER">255.0.0.0</TD>
 167 </TR>
 168 <TR>
 169         <TD ALIGN="CENTER">1</TD>
 170         <TD ALIGN="CENTER">128.0.0.0</TD>
 171         <TD ALIGN="CENTER">16</TD>
 172         <TD ALIGN="CENTER">255.255.0.0</TD>
 173 </TR>
 174 <TR>
 175         <TD ALIGN="CENTER">2</TD>
 176         <TD ALIGN="CENTER">192.0.0.0</TD>
 177         <TD ALIGN="CENTER">24</TD>
 178         <TD ALIGN="CENTER">255.255.255.0</TD>
 179 </TR>
 180 <TR>
 181         <TD ALIGN="CENTER">...</TD>
 182         <TD ALIGN="CENTER">...</TD>
 183         <TD ALIGN="CENTER">32</TD>
 184         <TD ALIGN="CENTER">255.255.255.255</TD>
 185 </TR>
 186 </TABLE></DIV>
 187
 188 <P>The <CODE>@LOCAL</CODE> name will allow access from all local
 189 interfaces. The <CODE>@IF(name)</CODE> name will allow access
 190 from the named interface. In both cases, CUPS only allows access
 191 from the network that the interface(s) are configured for -
 192 requests  arriving on the interface from a foreign network will
 193 <em>not</em> be accepted.</P>
 194
 195 <P>The <CODE>Allow</CODE> directive must appear inside a <A
 196 HREF="#Location"><CODE>Location</CODE></A> or <A
 197 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
 198
 199
 200 <H2 CLASS="title"><SPAN CLASS="info">Deprecated</SPAN><A NAME="AuthClass">AuthClass</A></H2>
 201
 202 <H3>Examples</H3>
 203
 204 <PRE CLASS="command">
 205 &lt;Location /path&gt;
 206   ...
 207   AuthClass Anonymous
 208   AuthClass User
 209   AuthClass System
 210   AuthClass Group
 211 &lt;/Location&gt;
 212 </PRE>
 213
 214 <H3>Description</H3>
 215
 216 <P>The <CODE>AuthClass</CODE> directive defines what level of
 217 authentication is required:</P>
 218
 219 <UL>
 220
 221         <LI><CODE>Anonymous</CODE> - No authentication should be
 222         performed (default)</LI>
 223
 224         <LI><CODE>User</CODE> - A valid username and password is
 225         required</LI>
 226
 227         <LI><CODE>System</CODE> - A valid username and password
 228         is required, and the username must belong to the "sys"
 229         group; this can be changed using the <A
 230         HREF="#SystemGroup"><CODE>SystemGroup</CODE></A>
 231         directive</LI>
 232
 233         <LI><CODE>Group</CODE> - A valid username and password is
 234         required, and the username must belong to the group named
 235         by the <A
 236         HREF="#AuthGroupName"><CODE>AuthGroupName</CODE></A>
 237         directive</LI>
 238
 239 </UL>
 240
 241 <P>The <CODE>AuthClass</CODE> directive must appear inside a <A
 242 HREF="#Location"><CODE>Location</CODE></A> or <A
 243 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
 244
 245 <P><B>This directive is deprecated and will be removed from a
 246 future release of CUPS.</B> Consider using the more flexible <A
 247 HREF="#Require"><CODE>Require</CODE></A> directive instead.</P>
 248
 249
 250 <H2 CLASS="title"><SPAN CLASS="info">Deprecated</SPAN><A NAME="AuthGroupName">AuthGroupName</A></H2>
 251
 252 <H3>Examples</H3>
 253
 254 <PRE CLASS="command">
 255 &lt;Location /path&gt;
 256   ...
 257   AuthGroupName mygroup
 258   AuthGroupName lp
 259 &lt;/Location&gt;
 260 </PRE>
 261
 262 <H3>Description</H3>
 263
 264 <P>The <CODE>AuthGroupName</CODE> directive sets the group to use
 265 for <CODE>Group</CODE> authentication.</P>
 266
 267 <P>The <CODE>AuthGroupName</CODE> directive must appear inside a
 268 <A HREF="#Location"><CODE>Location</CODE></A> or <A
 269 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
 270
 271 <P><B>This directive is deprecated and will be removed from a
 272 future release of CUPS.</B> Consider using the more flexible <A
 273 HREF="#Require"><CODE>Require</CODE></A> directive instead.</P>
 274
 275
 276 <H2 CLASS="title"><A NAME="AuthType">AuthType</A></H2>
 277
 278 <H3>Examples</H3>
 279
 280 <PRE CLASS="command">
 281 &lt;Location /path&gt;
 282   ...
 283   AuthType None
 284   AuthType Basic
 285   AuthType Digest
 286   AuthType BasicDigest
 287   AuthType Negotiate
 288 &lt;/Location&gt;
 289 </PRE>
 290
 291 <H3>Description</H3>
 292
 293 <P>The <CODE>AuthType</CODE> directive defines the type of
 294 authentication to perform:</P>
 295
 296 <UL>
 297
 298         <LI><CODE>None</CODE> - No authentication should be
 299         performed (default)</LI>
 300
 301         <LI><CODE>Basic</CODE> - Basic authentication should be
 302         performed using the UNIX password and group files</LI>
 303
 304         <LI><CODE>Digest</CODE> - Digest authentication should be
 305         performed using the <VAR>/etc/cups/passwd.md5</VAR>
 306         file</LI>
 307
 308         <LI><CODE>BasicDigest</CODE> - Basic authentication
 309         should be performed using the
 310         <VAR>/etc/cups/passwd.md5</VAR> file</LI>
 311
 312         <LI><CODE>Negotiate</CODE> - Kerberos authentication
 313         should be performed</LI>
 314
 315 </UL>
 316
 317 <P>When using <CODE>Basic</CODE>, <CODE>Digest</CODE>,
 318 <CODE>BasicDigest</CODE>, or <CODE>Negotiate</CODE> authentication,
 319 clients connecting through the <CODE>localhost</CODE> interface can
 320 also authenticate using certificates.</P>
 321
 322 <P>The <CODE>AuthType</CODE> directive must appear inside a <A
 323 HREF="#Location"><CODE>Location</CODE></A> or <A
 324 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
 325
 326
 327 <H2 CLASS="title"><A NAME="AutoPurgeJobs">AutoPurgeJobs</A></H2>
 328
 329 <H3>Examples</H3>
 330
 331 <PRE CLASS="command">
 332 AutoPurgeJobs Yes
 333 AutoPurgeJobs No
 334 </PRE>
 335
 336 <H3>Description</H3>
 337
 338 <P>The <CODE>AutoPurgeJobs</CODE> directive specifies whether or
 339 not to purge completed jobs once they are no longer required for
 340 quotas. This option has no effect if quotas are not enabled. The
 341 default setting is <CODE>No</CODE>.</P>
 342
 343
 344 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="BrowseLocalProtocols">BrowseLocalProtocols</A></H2>
 345
 346 <H3>Examples</H3>
 347
 348 <PRE CLASS="command">
 349 BrowseLocalProtocols all
 350 BrowseLocalProtocols none
 351 BrowseLocalProtocols dnssd
 352 </PRE>
 353
 354 <H3>Description</H3>
 355
 356 <P>The <CODE>BrowseLocalProtocols</CODE> directive specifies the
 357 protocols to use when advertising local shared printers on the
 358 network. Multiple protocols can be specified by separating them
 359 with spaces. The default is "<CODE>@CUPS_BROWSE_LOCAL_PROTOCOLS@</CODE>".</P>
 360
 361
 362 <H2 CLASS="title"><A NAME="BrowseWebIF">BrowseWebIF</A></H2>
 363
 364 <H3>Examples</H3>
 365
 366 <PRE CLASS="command">
 367 BrowseWebIF On
 368 BrowseWebIF Off
 369 </PRE>
 370
 371 <H3>Description</H3>
 372
 373 <P>The <CODE>BrowseWebIF</CODE> directive controls whether the CUPS web
 374 interface is advertised via DNS-SD. The default setting is
 375 <CODE>Off</CODE>.</P>
 376
 377
 378 <H2 CLASS="title"><A NAME="Browsing">Browsing</A></H2>
 379
 380 <H3>Examples</H3>
 381
 382 <PRE CLASS="command">
 383 Browsing On
 384 Browsing Off
 385 </PRE>
 386
 387 <H3>Description</H3>
 388
 389 <P>The <CODE>Browsing</CODE> directive controls whether or not
 390 printer sharing is enabled. The default setting is
 391 <CODE>@CUPS_BROWSING@</CODE>.</P>
 392
 393
 394 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="Classification">Classification</A></H2>
 395
 396 <H3>Examples</H3>
 397
 398 <PRE CLASS="command">
 399 Classification
 400 Classification classified
 401 Classification confidential
 402 Classification secret
 403 Classification topsecret
 404 Classification unclassified
 405 </PRE>
 406
 407 <H3>Description</H3>
 408
 409 <P>The <CODE>Classification</CODE> directive sets the
 410 classification level on the server. When this option is set, at
 411 least one of the banner pages is forced to the classification
 412 level, and the classification is placed on each page of output.
 413 The default is no classification level.</P>
 414
 415
 416 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.10</SPAN><A NAME="ClassifyOverride">ClassifyOverride</A></H2>
 417
 418 <H3>Examples</H3>
 419
 420 <PRE CLASS="command">
 421 ClassifyOverride Yes
 422 ClassifyOverride No
 423 </PRE>
 424
 425 <H3>Description</H3>
 426
 427 <P>The <CODE>ClassifyOverride</CODE> directive specifies whether
 428 users can override the default classification level on the
 429 server. When the server classification is set, users can change
 430 the classification using the <CODE>job-sheets</CODE> option and
 431 can choose to only print one security banner before or after the
 432 job. If the <CODE>job-sheets</CODE> option is set to
 433 <CODE>none</CODE> then the server default classification is
 434 used.</P>
 435
 436 <P>The default is to not allow classification overrides.</P>
 437
 438
 439 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.15</SPAN><A NAME="ConfigFilePerm">ConfigFilePerm</A></H2>
 440
 441 <H3>Examples</H3>
 442
 443 <PRE CLASS="command">
 444 ConfigFilePerm 0644
 445 ConfigFilePerm 0640
 446 </PRE>
 447
 448 <H3>Description</H3>
 449
 450 <P>The <CODE>ConfigFilePerm</CODE> directive specifies the permissions to use when the scheduler writes configuration and cache files, typically in response to IPP or HTTP requests. The default is @CUPS_CONFIG_FILE_PERM@.</P>
 451
 452 <BLOCKQUOTE><B>Note:</B>
 453
 454 <P>The permissions for the <VAR>printers.conf</VAR> file are always masked to only allow access from the scheduler user (typically root). This is done because printer device URIs sometimes contain sensitive authentication information that should not be generally known on the system. There is no way to disable this security feature.</P>
 455
 456 </BLOCKQUOTE>
 457
 458
 459 <H2 CLASS="title"><A NAME="DataDir">DataDir</A></H2>
 460
 461 <H3>Examples</H3>
 462
 463 <PRE CLASS="command">
 464 DataDir /usr/share/cups
 465 </PRE>
 466
 467 <H3>Description</H3>
 468
 469 <P>The <CODE>DataDir</CODE> directive sets the directory to use
 470 for data files.</P>
 471
 472
 473 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="DefaultAuthType">DefaultAuthType</A></H2>
 474
 475 <H3>Examples</H3>
 476
 477 <PRE CLASS="command">
 478 DefaultAuthType Basic
 479 DefaultAuthType BasicDigest
 480 DefaultAuthType Digest
 481 DefaultAuthType Negotiate
 482 </PRE>
 483
 484 <H3>Description</H3>
 485
 486 <P>The <CODE>DefaultAuthType</CODE> directive specifies the type
 487 of authentication to use for IPP operations that require a
 488 username. The default is <CODE>Basic</CODE>.</P>
 489
 490
 491 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="DefaultEncryption">DefaultEncryption</A></H2>
 492
 493 <H3>Examples</H3>
 494
 495 <PRE CLASS="command">
 496 DefaultEncryption Never
 497 DefaultEncryption IfRequested
 498 DefaultEncryption Required
 499 </PRE>
 500
 501 <H3>Description</H3>
 502
 503 <P>The <CODE>DefaultEncryption</CODE> directive specifies the
 504 type of encryption to use when performing authentication. The
 505 default is <CODE>Required</CODE>.</P>
 506
 507
 508 <H2 CLASS="title"><A NAME="DefaultLanguage">DefaultLanguage</A></H2>
 509
 510 <H3>Examples</H3>
 511
 512 <PRE CLASS="command">
 513 DefaultLanguage de
 514 DefaultLanguage en
 515 DefaultLanguage es
 516 DefaultLanguage fr
 517 DefaultLanguage it
 518 </PRE>
 519
 520 <H3>Description</H3>
 521
 522 <P>The <CODE>DefaultLanguage</CODE> directive specifies the
 523 default language to use for client connections. Setting the
 524 default language also sets the default character set if a
 525 language localization file exists for it. The default language
 526 is "en" for English.</P>
 527
 528
 529 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.4/OS X 10.6</SPAN><A NAME="DefaultPaperSize">DefaultPaperSize</A></H2>
 530
 531 <H3>Examples</H3>
 532
 533 <PRE CLASS="command">
 534 DefaultPaperSize Letter
 535 DefaultPaperSize A4
 536 DefaultPaperSize Auto
 537 DefaultPaperSize None
 538 </PRE>
 539
 540 <H3>Description</H3>
 541
 542 <P>The <CODE>DefaultPaperSize</CODE> directive specifies the default paper
 543 size to use when creating new printers. The default is <CODE>Auto</CODE>
 544 which uses a paper size appropriate for the system default locale. A value
 545 of <CODE>None</CODE> tells the scheduler to not set the default paper
 546 size.</P>
 547
 548
 549 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="DefaultPolicy">DefaultPolicy</A></H2>
 550
 551 <H3>Examples</H3>
 552
 553 <PRE CLASS="command">
 554 DefaultPolicy default
 555 DefaultPolicy authenticated
 556 DefaultPolicy foo
 557 </PRE>
 558
 559 <H3>Description</H3>
 560
 561 <P>The <CODE>DefaultPolicy</CODE> directive specifies the default
 562 policy to use for IPP operation. The default is
 563 <CODE>default</CODE>. CUPS also includes a policy called
 564 <CODE>authenticated</CODE> that requires a username and password for printing
 565 and other job operations.</P>
 566
 567
 568 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="DefaultShared">DefaultShared</A></H2>
 569
 570 <H3>Examples</H3>
 571
 572 <PRE CLASS="command">
 573 DefaultShared yes
 574 DefaultShared no
 575 </PRE>
 576
 577 <H3>Description</H3>
 578
 579 <P>The <CODE>DefaultShared</CODE> directive specifies whether
 580 printers are shared (published) by default. The default is
 581 <CODE>@CUPS_DEFAULT_SHARED@</CODE>.</P>
 582
 583
 584 <H2 CLASS="title"><A NAME="Deny">Deny</A></H2>
 585
 586 <H3>Examples</H3>
 587
 588 <PRE CLASS="command">
 589 &lt;Location /path&gt;
 590   ..
 591   Deny from All
 592   Deny from None
 593   Deny from *.example.com
 594   Deny from .example.com
 595   Deny from host.example.com
 596   Deny from nnn.*
 597   Deny from nnn.nnn.*
 598   Deny from nnn.nnn.nnn.*
 599   Deny from nnn.nnn.nnn.nnn
 600   Deny from nnn.nnn.nnn.nnn/mm
 601   Deny from nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
 602   Deny from [xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]
 603   Deny from [xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]/mmm
 604   Deny from @LOCAL
 605   Deny from @IF(name)
 606 &lt;/Location&gt;
 607 </PRE>
 608
 609 <H3>Description</H3>
 610
 611 <P>The <CODE>Deny</CODE> directive specifies a hostname, IP
 612 address, or network that is denied access to the server.
 613 <CODE>Deny</CODE> directives are cumulative, so multiple
 614 <CODE>Deny</CODE> directives can be used to deny access for
 615 multiple hosts or networks.</P>
 616
 617 <P>Host and domain name matching require that you enable the <A
 618 HREF="#HostNameLookups"><CODE>HostNameLookups</CODE></A>
 619 directive.</P>
 620
 621 <P>The <CODE>/mm</CODE> notation specifies a CIDR netmask, a shown in
 622 <A HREF="TABLE1">Table 1</A>.</P>
 623
 624 <P>The <CODE>@LOCAL</CODE> name will deny access from all local
 625 interfaces. The <CODE>@IF(name)</CODE> name will deny access from
 626 the named interface. In both cases, CUPS only denies access from
 627 the network that the interface(s) are configured for - requests
 628 arriving on the interface from a foreign network will
 629 <em>not</em> be denied.</P>
 630
 631 <P>The <CODE>Deny</CODE> directive must appear inside a <A
 632 HREF="#Location"><CODE>Location</CODE></A> or <A
 633 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
 634
 635
 636 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.4/OS X 10.6</SPAN><A NAME="DirtyCleanInterval">DirtyCleanInterval</A></H2>
 637
 638 <H3>Examples</H3>
 639
 640 <PRE CLASS="command">
 641 DirtyCleanInterval 1w
 642 DirtyCleanInterval 1d
 643 DirtyCleanInterval 1h
 644 DirtyCleanInterval 1m
 645 DirtyCleanInterval 30
 646 DirtyCleanInterval 0
 647 </PRE>
 648
 649 <H3>Description</H3>
 650
 651 <P>The <CODE>DirtyCleanInterval</CODE> directive specifies the amount of time to wait before updating configuration and state files for printers, classes, subscriptions, and jobs in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix). A value of <CODE>0</CODE> causes the update to occur as soon as possible, typically within a few milliseconds.</P>
 652
 653 <P>The default value is <CODE>30</CODE> (30 seconds).</P>
 654
 655
 656 <H2 CLASS="title"><A NAME="DocumentRoot">DocumentRoot</A></H2>
 657
 658 <H3>Examples</H3>
 659
 660 <PRE CLASS="command">
 661 DocumentRoot /usr/share/doc/cups
 662 DocumentRoot /foo/bar/doc/cups
 663 </PRE>
 664
 665 <H3>Description</H3>
 666
 667 <P>The <CODE>DocumentRoot</CODE> directive specifies the location
 668 of web content for the HTTP server in CUPS. If an absolute path
 669 is not specified then it is assumed to be relative to the <A
 670 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
 671 default directory is <VAR>@CUPS_DOCROOT@</VAR>.</P>
 672
 673 <P>Documents are first looked up in a sub-directory for the
 674 primary language requested by the client (e.g.
 675 <VAR>@CUPS_DOCROOT@/fr/...</VAR>) and then directly under
 676 the <CODE>DocumentRoot</CODE> directory (e.g.
 677 <VAR>@CUPS_DOCROOT@/...</VAR>), so it is possible to
 678 localize the web content by providing subdirectories for each
 679 language needed.</P>
 680
 681
 682 <H2 CLASS="title"><A NAME="Encryption">Encryption</A></H2>
 683
 684 <H3>Examples</H3>
 685
 686 <PRE CLASS="command">
 687 &lt;Location /path&gt;
 688   ...
 689   Encryption Never
 690   Encryption IfRequested
 691   Encryption Required
 692 &lt;/Location&gt;
 693 </PRE>
 694
 695 <H3>Description</H3>
 696
 697 <P>The <CODE>Encryption</CODE> directive must appear instead a <A
 698 HREF="#Location"><CODE>Location</CODE></A> or <A
 699 HREF="#Limit"><CODE>Limit</CODE></A> section and specifies the
 700 encryption settings for that location. The default setting is
 701 <CODE>IfRequested</CODE> for all locations.</P>
 702
 703
 704 <H2 CLASS="title"><A NAME="ErrorLog">ErrorLog</A></H2>
 705
 706 <H3>Examples</H3>
 707
 708 <PRE CLASS="command">
 709 ErrorLog /var/log/cups/error_log
 710 ErrorLog /var/log/cups/error_log-%s
 711 ErrorLog syslog
 712 </PRE>
 713
 714 <H3>Description</H3>
 715
 716 <P>The <CODE>ErrorLog</CODE> directive sets the name of the error
 717 log file. If the filename is not absolute then it is assumed to
 718 be relative to the <A
 719 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
 720 default error log file is <VAR>@CUPS_LOGDIR@/error_log</VAR>.</P>
 721
 722 <P>The server name can be included in the filename by using
 723 <CODE>%s</CODE> in the name.</P>
 724
 725 <P>The special name "syslog" can be used to send the error
 726 information to the system log instead of a plain file.</P>
 727
 728
 729 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.3/OS X 10.5</SPAN><A NAME="ErrorPolicy">ErrorPolicy</A></H2>
 730
 731 <H3>Examples</H3>
 732
 733 <PRE CLASS="command">
 734 ErrorPolicy abort-job
 735 ErrorPolicy retry-job
 736 ErrorPolicy stop-printer
 737 </PRE>
 738
 739 <H3>Description</H3>
 740
 741 <P>The <CODE>ErrorPolicy</CODE> directive defines the default policy that
 742 is used when a backend is unable to send a print job to the
 743 printer.</P>
 744
 745 <P>The following values are supported:</P>
 746
 747 <UL>
 748
 749         <LI><CODE>abort-job</CODE> - Abort the job and proceed
 750         with the next job in the queue</LI>
 751
 752         <LI><CODE>retry-job</CODE> - Retry the job after waiting
 753         for N seconds; the <VAR>cupsd.conf</VAR> <A
 754         HREF="#JobRetryInterval"><CODE>JobRetryInterval</CODE></A>
 755         directive controls the value of N</LI>
 756
 757         <LI><CODE>retry-this-job</CODE> - Retry the current job immediately
 758         and indefinitely.</LI>
 759
 760         <LI><CODE>stop-printer</CODE> - Stop the printer and keep
 761         the job for future printing; this is the default
 762         value</LI>
 763
 764 </UL>
 765
 766
 767
 768 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.4/OS X 10.6</SPAN><A NAME="FatalErrors">FatalErrors</A></H2>
 769
 770 <H3>Examples</H3>
 771
 772 <PRE CLASS="command">
 773 FatalErrors none
 774 FatalErrors all
 775 FatalErrors browse
 776 FatalErrors config
 777 FatalErrors listen
 778 FatalErrors log
 779 FatalErrors permissions
 780 FatalErrors all -permissions
 781 FatalErrors config permissions log
 782 </PRE>
 783
 784 <H3>Description</H3>
 785
 786 <P>The <CODE>FatalErrors</CODE> directive determines whether certain kinds of
 787 errors are fatal. The following kinds of errors are currently recognized:</P>
 788
 789 <UL>
 790
 791         <LI><CODE>none</CODE> - No errors are fatal</LI>
 792
 793         <LI><CODE>all</CODE> - All of the errors below are fatal</LI>
 794
 795         <LI><CODE>browse</CODE> - Browsing initialization errors are fatal,
 796         for example failed binding to the CUPS browse port or failed connections
 797         to LDAP servers</LI>
 798
 799         <LI><CODE>config</CODE> - Configuration file syntax errors are
 800         fatal</LI>
 801
 802         <LI><CODE>listen</CODE> - Listen or Port errors are fatal, except for
 803         IPv6 failures on the loopback or "any" addresses</LI>
 804
 805         <LI><CODE>log</CODE> - Log file creation or write errors are fatal</LI>
 806
 807         <LI><CODE>permissions</CODE> - Bad startup file permissions are
 808         fatal, for example shared SSL certificate and key files with world-
 809         read permissions</LI>
 810
 811 </UL>
 812
 813 <P>Multiple errors can be listed, and the form "-kind" can be used with
 814 <CODE>all</CODE> to remove specific kinds of errors. The default setting is
 815 <CODE>@CUPS_FATAL_ERRORS@</CODE>.</P>
 816
 817
 818 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.18</SPAN><A NAME="FileDevice">FileDevice</A></H2>
 819
 820 <H3>Examples</H3>
 821
 822 <PRE CLASS="command">
 823 FileDevice Yes
 824 FileDevice No
 825 </PRE>
 826
 827 <H3>Description</H3>
 828
 829 <P>The <CODE>FileDevice</CODE> directive determines whether the
 830 scheduler allows new printers to be added using device URIs of
 831 the form <CODE>file:/filename</CODE>. File devices are most often
 832 used to test new printer drivers and do not support raw file
 833 printing.</P>
 834
 835 <P>The default setting is <CODE>No</CODE>.</P>
 836
 837 <BLOCKQUOTE><B>Note:</B>
 838
 839 <P>File devices are managed by the scheduler. Since the
 840 scheduler normally runs as the root user, file devices
 841 can be used to overwrite system files and potentially
 842 gain unauthorized access to the system. If you must
 843 create printers using file devices, we recommend that
 844 you set the <CODE>FileDevice</CODE> directive to
 845 <CODE>Yes</CODE> for only as long as you need to add the
 846 printers to the system, and then reset the directive to
 847 <CODE>No</CODE>.</P>
 848
 849 </BLOCKQUOTE>
 850
 851
 852 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.3</SPAN><A NAME="FilterLimit">FilterLimit</A></H2>
 853
 854 <H3>Examples</H3>
 855
 856 <PRE CLASS="command">
 857 FilterLimit 0
 858 FilterLimit 200
 859 FilterLimit 1000
 860 </PRE>
 861
 862 <H3>Description</H3>
 863
 864 <P>The <CODE>FilterLimit</CODE> directive sets the maximum cost
 865 of all running job filters. It can be used to limit the number of
 866 filter programs that are run on a server to minimize disk,
 867 memory, and CPU resource problems. A limit of 0 disables filter
 868 limiting.</P>
 869
 870 <P>An average print to a non-PostScript printer needs a filter
 871 limit of about 200. A PostScript printer needs about half that
 872 (100). Setting the limit below these thresholds will effectively
 873 limit the scheduler to printing a single job at any time.</P>
 874
 875 <P>The default limit is 0.</P>
 876
 877
 878 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.16</SPAN><A NAME="FilterNice">FilterNice</A></H2>
 879
 880 <H3>Examples</H3>
 881
 882 <PRE CLASS="command">
 883 FilterNice 0
 884 FilterNice 10
 885 FilterNice 19
 886 </PRE>
 887
 888 <H3>Description</H3>
 889
 890 <P>The <CODE>FilterNice</CODE> directive sets the <B>nice(1)</B>
 891 value to assign to filter processes. The nice value ranges from
 892 0, the highest priority, to 19, the lowest priority. The default
 893 is 0.</P>
 894
 895
 896 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.3</SPAN><A NAME="FontPath">FontPath</A></H2>
 897
 898 <H3>Examples</H3>
 899
 900 <PRE CLASS="command">
 901 FontPath /foo/bar/fonts
 902 FontPath /usr/share/cups/fonts:/foo/bar/fonts
 903 </PRE>
 904
 905 <H3>Description</H3>
 906
 907 <P>The <CODE>FontPath</CODE> directive specifies the font path to
 908 use when searching for fonts. The default font path is
 909 <CODE>/usr/share/cups/fonts</CODE>.</P>
 910
 911
 912 <H2 CLASS="title"><A NAME="Group">Group</A></H2>
 913
 914 <H3>Examples</H3>
 915
 916 <PRE CLASS="command">
 917 Group lp
 918 Group nobody
 919 </PRE>
 920
 921 <H3>Description</H3>
 922
 923 <P>The <CODE>Group</CODE> directive specifies the UNIX group that
 924 filter and CGI programs run as. The default group is
 925 system-specific but is usually <CODE>lp</CODE> or
 926 <CODE>nobody</CODE>.</P>
 927
 928
 929 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.6/OS X 10.8</SPAN><A NAME="GSSServiceName">GSSServiceName</A></H2>
 930
 931 <H3>Examples</H3>
 932
 933 <PRE CLASS="command">
 934 GSSServiceName http
 935 GSSServiceName ipp
 936 </PRE>
 937
 938 <H3>Description</H3>
 939
 940 <P>The <CODE>GSSServiceName</CODE> directive sets the Kerberos service name to use. The default is <CODE>@CUPS_DEFAULT_GSSSERVICE_NAME@</CODE> for compatibility with Microsoft Windows.</P>
 941
 942
 943 <H2 CLASS="title"><A NAME="HostNameLookups">HostNameLookups</A></H2>
 944
 945 <H3>Examples</H3>
 946
 947 <PRE CLASS="command">
 948 HostNameLookups On
 949 HostNameLookups Off
 950 HostNameLookups Double
 951 </PRE>
 952
 953 <H3>Description</H3>
 954
 955 <P>The <CODE>HostNameLookups</CODE> directive controls whether or
 956 not CUPS looks up the hostname for connecting clients. The
 957 <CODE>Double</CODE> setting causes CUPS to verify that the
 958 hostname resolved from the address matches one of the addresses
 959 returned for that hostname. <CODE>Double</CODE> lookups also
 960 prevent clients with unregistered addresses from connecting to
 961 your server.</P>
 962
 963 <P>The default is <CODE>Off</CODE> to avoid the potential server
 964 performance problems with hostname lookups. Set this option to
 965 <CODE>On</CODE> or <CODE>Double</CODE> only if absolutely
 966 required.</P>
 967
 968
 969 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.9</SPAN><A NAME="Include">Include</A></H2>
 970
 971 <H3>Examples</H3>
 972
 973 <PRE CLASS="command">
 974 Include filename
 975 Include /foo/bar/filename
 976 </PRE>
 977
 978 <H3>Description</H3>
 979
 980 <P>The <CODE>Include</CODE> directive includes the named file in
 981 the <CODE>cupsd.conf</CODE> file. If no leading path is provided,
 982 the file is assumed to be relative to the <A
 983 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory.</P>
 984
 985
 986 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.5</SPAN><A NAME="JobPrivateAccess">JobPrivateAccess</A></H2>
 987
 988 <H3>Examples</H3>
 989
 990 <PRE CLASS="command">
 991 JobPrivateAccess all
 992 JobPrivateAccess default
 993 JobPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+
 994 </PRE>
 995
 996 <H3>Description</H3>
 997
 998 <P>The <CODE>JobPrivateAccess</CODE> directive specifies the access list for a
 999 job's private values. The "default" access list is "@OWNER @SYSTEM". "@ACL" maps
1000 to the printer's requesting-user-name-allowed or requesting-user-name-denied
1001 values.</P>
1002
1003 <P>The <CODE>JobPrivateAccess</CODE> directive must appear inside a <A
1004 HREF="#Policy"><CODE>Policy</CODE></A> section.</P>
1005
1006
1007 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.5</SPAN><A NAME="JobPrivateValues">JobPrivateValues</A></H2>
1008
1009 <H3>Examples</H3>
1010
1011 <PRE CLASS="command">
1012 JobPrivateValues all
1013 JobPrivateValues default
1014 JobPrivateValues none
1015 JobPrivateValues attribute-name-1 [ ... attribute-name-N ]
1016 </PRE>
1017
1018 <H3>Description</H3>
1019
1020 <P>The <CODE>JobPrivateValues</CODE> directive specifies the list of job values
1021 to make private. The "default" values are "job-name",
1022 "job-originating-host-name", "job-originating-user-name", and "phone".</P>
1023
1024 <P>The <CODE>JobPrivateValues</CODE> directive must appear inside a <A
1025 HREF="#Policy"><CODE>Policy</CODE></A> section.</P>
1026
1027
1028 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="JobRetryInterval">JobRetryInterval</A></H2>
1029
1030 <H3>Examples</H3>
1031
1032 <PRE CLASS="command">
1033 JobRetryInterval 1w
1034 JobRetryInterval 1d
1035 JobRetryInterval 1h
1036 JobRetryInterval 1m
1037 JobRetryInterval 30
1038 </PRE>
1039
1040 <H3>Description</H3>
1041
1042 <P>The <CODE>JobRetryInterval</CODE> directive specifies the amount of time to wait before retrying a job in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix). This is typically used for fax queues but can also be used with normal print queues whose error policy is <CODE>retry-job</CODE> or <CODE>retry-current-job</CODE>.</P>
1043
1044 <P>The default is <CODE>30</CODE> (30 seconds).</P>
1045
1046
1047 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.4/OS X 10.6</SPAN><A NAME="JobKillDelay">JobKillDelay</A></H2>
1048
1049 <H3>Examples</H3>
1050
1051 <PRE CLASS="command">
1052 JobKillDelay 1w
1053 JobKillDelay 1d
1054 JobKillDelay 1h
1055 JobKillDelay 1m
1056 JobKillDelay 30
1057 </PRE>
1058
1059 <H3>Description</H3>
1060
1061 <P>The <CODE>JobKillDelay</CODE> directive specifies the amount of time to wait before killing the filters and backend associated with a canceled or held job in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
1062
1063 <P>The default is <CODE>30</CODE> (30 seconds).</P>
1064
1065
1066 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="JobRetryLimit">JobRetryLimit</A></H2>
1067
1068 <H3>Examples</H3>
1069
1070 <PRE CLASS="command">
1071 JobRetryLimit 5
1072 JobRetryLimit 50
1073 </PRE>
1074
1075 <H3>Description</H3>
1076
1077 <P>The <CODE>JobRetryLimit</CODE> directive specifies the maximum
1078 number of times the scheduler will try to print a job. This is
1079 typically used for fax queues but can also be used with normal
1080 print queues whose error policy is <CODE>retry-job</CODE>. The
1081 default is 5 times.</P>
1082
1083
1084 <H2 CLASS="title"><A NAME="KeepAlive">KeepAlive</A></H2>
1085
1086 <H3>Examples</H3>
1087
1088 <PRE CLASS="command">
1089 KeepAlive On
1090 KeepAlive Off
1091 </PRE>
1092
1093 <H3>Description</H3>
1094
1095 <P>The <CODE>KeepAlive</CODE> directive controls whether or not
1096 to support persistent HTTP connections. The default is
1097 <CODE>On</CODE>.</P>
1098
1099 <P>HTTP/1.1 clients automatically support persistent connections,
1100 while HTTP/1.0 clients must specifically request them using the
1101 <CODE>Keep-Alive</CODE> attribute in the <CODE>Connection:</CODE>
1102 field of each request.</P>
1103
1104
1105 <H2 CLASS="title"><A NAME="KeepAliveTimeout">KeepAliveTimeout</A></H2>
1106
1107 <H3>Examples</H3>
1108
1109 <PRE CLASS="command">
1110 KeepAliveTimeout 1w
1111 KeepAliveTimeout 1d
1112 KeepAliveTimeout 1h
1113 KeepAliveTimeout 1m
1114 KeepAliveTimeout 30
1115 </PRE>
1116
1117 <H3>Description</H3>
1118
1119 <P>The <CODE>KeepAliveTimeout</CODE> directive controls how long a persistent HTTP connection will remain open after the last request in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
1120
1121 <P>The default is <CODE>30</CODE> (30 seconds).</P>
1122
1123
1124 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="Limit">Limit (Location)</A></H2>
1125
1126 <H3>Examples</H3>
1127
1128 <PRE CLASS="command">
1129 &lt;Location /path&gt;
1130   &lt;Limit GET POST&gt;
1131   ...
1132   &lt;/Limit&gt;
1133
1134   &lt;Limit ALL&gt;
1135   ...
1136   &lt;/Limit&gt;
1137 &lt;/Location&gt;
1138 </PRE>
1139
1140 <H3>Description</H3>
1141
1142 <P>The <CODE>Limit</CODE> directive groups access control
1143 directives for specific types of HTTP requests and must appear
1144 inside a <A HREF="#Location"><CODE>Location</CODE></A> section.
1145 Access can be limited for individual request types
1146 (<CODE>DELETE</CODE>, <CODE>GET</CODE>, <CODE>HEAD</CODE>,
1147 <CODE>OPTIONS</CODE>, <CODE>POST</CODE>, <CODE>PUT</CODE>, and
1148 <CODE>TRACE</CODE>) or for all request types (<CODE>ALL</CODE>).
1149 The request type names are case-sensitive for compatibility with
1150 Apache.</P>
1151
1152
1153 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="LimitIPP">Limit (Policy)</A></H2>
1154
1155 <H3>Examples</H3>
1156
1157 <PRE CLASS="command">
1158 &lt;Policy name&gt;
1159   &lt;Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer&gt;
1160   ...
1161   &lt;/Limit&gt;
1162
1163   &lt;Limit All&gt;
1164   ...
1165   &lt;/Limit&gt;
1166 &lt;/Policy&gt;
1167 </PRE>
1168
1169 <H3>Description</H3>
1170
1171 <P>When included in <A HREF="#Policy"><CODE>Policy</CODE></A>
1172 sections, the <CODE>Limit</CODE> directive groups access control
1173 directives for specific IPP operations. Multiple operations can
1174 be listed, separated by spaces. Table 2 lists the supported
1175 operations.</P>
1176
1177 <DIV CLASS="table"><TABLE SUMMARY="Supported IPP Operations">
1178 <CAPTION>Table 2: <A NAME="TABLE2">Supported IPP Operations</A></CAPTION>
1179 <THEAD>
1180 <TR>
1181         <TH>Operation Name</TH>
1182         <TH>Description</TH>
1183 </TR>
1184 </THEAD>
1185 <TBODY>
1186 <TR>
1187         <TD>All</TD>
1188         <TD>All operations - used as the default limit for
1189         operations that are not listed</TD>
1190 </TR>
1191 <TR>
1192         <TD>Cancel-Job</TD>
1193         <TD>Cancel a job</TD>
1194 </TR>
1195 <TR>
1196         <TD>Cancel-Subscription</TD>
1197         <TD>Cancel a subscription</TD>
1198 </TR>
1199 <TR>
1200         <TD>Create-Job</TD>
1201         <TD>Create a new, empty job</TD>
1202 </TR>
1203 <TR>
1204         <TD>Create-Job-Subscription</TD>
1205         <TD>Creates a notification subscription on a job</TD>
1206 </TR>
1207 <TR>
1208         <TD>Create-Printer-Subscription</TD>
1209         <TD>Creates a notification subscription on a printer</TD>
1210 </TR>
1211 <TR>
1212         <TD>CUPS-Accept-Jobs</TD>
1213         <TD>Sets the printer-is-accepting-jobs value for a printer to true</TD>
1214 </TR>
1215 <TR>
1216         <TD>CUPS-Add-Modify-Class</TD>
1217         <TD>Adds or modifies a class</TD>
1218 </TR>
1219 <TR>
1220         <TD>CUPS-Add-Modify-Printer</TD>
1221         <TD>Adds or modifies a printer</TD>
1222 </TR>
1223 <TR>
1224         <TD>CUPS-Authenticate-Job</TD>
1225         <TD>Authenticates a job for printing</TD>
1226 </TR>
1227 <TR>
1228         <TD>CUPS-Delete-Class</TD>
1229         <TD>Deletes a class</TD>
1230 </TR>
1231 <TR>
1232         <TD>CUPS-Delete-Printer</TD>
1233         <TD>Deletes a printer</TD>
1234 </TR>
1235 <TR>
1236         <TD>CUPS-Get-Classes</TD>
1237         <TD>Gets a list of classes</TD>
1238 </TR>
1239 <TR>
1240         <TD>CUPS-Get-Default</TD>
1241         <TD>Gets the (network/server) default printer or class</TD>
1242 </TR>
1243 <TR>
1244         <TD>CUPS-Get-Devices</TD>
1245         <TD>Gets a list of available devices</TD>
1246 </TR>
1247 <TR>
1248         <TD>CUPS-Get-PPDs</TD>
1249         <TD>Gets a list of available manufacturers or drivers</TD>
1250 </TR>
1251 <TR>
1252         <TD>CUPS-Get-Printers</TD>
1253         <TD>Gets a list of printers and/or classes</TD>
1254 </TR>
1255 <TR>
1256         <TD>CUPS-Move-Job</TD>
1257         <TD>Moves a job to a new destination</TD>
1258 </TR>
1259 <TR>
1260         <TD>CUPS-Reject-Jobs</TD>
1261         <TD>Sets the printer-is-accepting-jobs value for a printer to false</TD>
1262 </TR>
1263 <TR>
1264         <TD>CUPS-Set-Default</TD>
1265         <TD>Sets the network/server default printer or class</TD>
1266 </TR>
1267 <TR>
1268         <TD>Disable-Printer</TD>
1269         <TD>Sets the printer-state value for a printer to stopped</TD>
1270 </TR>
1271 <TR>
1272         <TD>Enable-Printer</TD>
1273         <TD>Sets the printer-state value for a printer to idle/processing</TD>
1274 </TR>
1275 <TR>
1276         <TD>Get-Job-Attributes</TD>
1277         <TD>Gets information about a job</TD>
1278 </TR>
1279 <TR>
1280         <TD>Get-Jobs</TD>
1281         <TD>Gets a list of jobs</TD>
1282 </TR>
1283 <TR>
1284         <TD>Get-Notifications</TD>
1285         <TD>Gets a list of events</TD>
1286 </TR>
1287 <TR>
1288         <TD>Get-Printer-Attributes</TD>
1289         <TD>Gets information about a printer or class</TD>
1290 </TR>
1291 <TR>
1292         <TD>Get-Subscription-Attributes</TD>
1293         <TD>Gets information about a notification subscription</TD>
1294 </TR>
1295 <TR>
1296         <TD>Get-Subscriptions</TD>
1297         <TD>Gets a list of notification subscriptions</TD>
1298 </TR>
1299 <TR>
1300         <TD>Hold-Job</TD>
1301         <TD>Holds a job for printing</TD>
1302 </TR>
1303 <TR>
1304         <TD>Pause-Printer</TD>
1305         <TD>Sets the printer-state value for a printer to stopped</TD>
1306 </TR>
1307 <TR>
1308         <TD>Print-Job</TD>
1309         <TD>Creates a job with a single file for printing</TD>
1310 </TR>
1311 <TR>
1312         <TD>Purge-Jobs</TD>
1313         <TD>Removes all jobs from a printer</TD>
1314 </TR>
1315 <TR>
1316         <TD>Release-Job</TD>
1317         <TD>Releases a previously held job for printing</TD>
1318 </TR>
1319 <TR>
1320         <TD>Renew-Subscription</TD>
1321         <TD>Renews a notification subscription</TD>
1322 </TR>
1323 <TR>
1324         <TD>Restart-Job</TD>
1325         <TD>Reprints a job</TD>
1326 </TR>
1327 <TR>
1328         <TD>Resume-Printer</TD>
1329         <TD>Sets the printer-state value for a printer to idle/processing</TD>
1330 </TR>
1331 <TR>
1332         <TD>Send-Document</TD>
1333         <TD>Adds a file to an job created with Create-Job</TD>
1334 </TR>
1335 <TR>
1336         <TD>Set-Job-Attributes</TD>
1337         <TD>Changes job options</TD>
1338 </TR>
1339 <TR>
1340         <TD>Validate-Job</TD>
1341         <TD>Validates job options prior to printing</TD>
1342 </TR>
1343 </TBODY>
1344 </TABLE></DIV>
1345
1346
1347 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="LimitExcept">LimitExcept</A></H2>
1348
1349 <H3>Examples</H3>
1350
1351 <PRE CLASS="command">
1352 &lt;Location /path&gt;
1353   &lt;LimitExcept GET POST&gt;
1354   ...
1355   &lt;/LimitExcept&gt;
1356 &lt;/Location&gt;
1357 </PRE>
1358
1359 <H3>Description</H3>
1360
1361 <P>The <CODE>LimitExcept</CODE> directive groups access control
1362 directives for specific types of HTTP requests and must appear
1363 inside a <A HREF="#Location"><CODE>Location</CODE></A> section.
1364 Unlike the <A HREF="#Limit"><CODE>Limit</CODE></A> directive,
1365 <CODE>LimitExcept</CODE> restricts access for all requests
1366 <I>except</I> those listed on the <CODE>LimitExcept</CODE>
1367 line.</P>
1368
1369
1370 <H2 CLASS="title"><A NAME="LimitRequestBody">LimitRequestBody</A></H2>
1371
1372 <H3>Examples</H3>
1373
1374 <PRE CLASS="command">
1375 LimitRequestBody 10485760
1376 LimitRequestBody 10m
1377 LimitRequestBody 0
1378 </PRE>
1379
1380 <H3>Description</H3>
1381
1382 <P>The <CODE>LimitRequestBody</CODE> directive controls the
1383 maximum size of print files, IPP requests, and HTML form data in
1384 HTTP POST requests. The default limit is 0 which disables the
1385 limit check.</P>
1386
1387
1388 <H2 CLASS="title"><A NAME="Listen">Listen</A></H2>
1389
1390 <H3>Examples</H3>
1391
1392 <PRE CLASS="command">
1393 Listen 127.0.0.1:631
1394 Listen 192.0.2.1:631
1395 Listen [::1]:631
1396 Listen *:631
1397 </PRE>
1398
1399 <H3>Description</H3>
1400
1401 <P>The <CODE>Listen</CODE> directive specifies a network address
1402 and port to listen for connections. Multiple <CODE>Listen</CODE>
1403 directives can be provided to listen on multiple addresses.</P>
1404
1405 <P>The <CODE>Listen</CODE> directive is similar to the <A
1406 HREF="#Port"><CODE>Port</CODE></A> directive but allows you to
1407 restrict access to specific interfaces or networks.</P>
1408
1409
1410 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="ListenBackLog">ListenBackLog</A></H2>
1411
1412 <H3>Examples</H3>
1413
1414 <PRE CLASS="command">
1415 ListenBackLog 5
1416 ListenBackLog 10
1417 </PRE>
1418
1419 <H3>Description</H3>
1420
1421 <P>The <CODE>ListenBackLog</CODE> directive sets the maximum
1422 number of pending connections the scheduler will allow. This
1423 normally only affects very busy servers that have reached the <A
1424 HREF="#MaxClients"><CODE>MaxClients</CODE></A> limit, but can
1425 also be triggered by large numbers of simultaneous connections.
1426 When the limit is reached, the operating system will refuse
1427 additional connections until the scheduler can accept the pending
1428 ones. The default is the OS-defined default limit, typically
1429 either 5 for older operating systems or 128 for newer operating
1430 systems.</P>
1431
1432
1433 <H2 CLASS="title"><A NAME="Location">Location</A></H2>
1434
1435 <H3>Examples</H3>
1436
1437 <PRE CLASS="command">
1438 &lt;Location /&gt;
1439 ...
1440 &lt;/Location&gt;
1441
1442 &lt;Location /admin&gt;
1443 ...
1444 &lt;/Location&gt;
1445
1446 &lt;Location /admin/conf&gt;
1447 ...
1448 &lt;/Location&gt;
1449
1450 &lt;Location /admin/log&gt;
1451 ...
1452 &lt;/Location&gt;
1453
1454 &lt;Location /classes&gt;
1455 ...
1456 &lt;/Location&gt;
1457
1458 &lt;Location /classes/name&gt;
1459 ...
1460 &lt;/Location&gt;
1461
1462 &lt;Location /jobs&gt;
1463 ...
1464 &lt;/Location&gt;
1465
1466 &lt;Location /printers&gt;
1467 ...
1468 &lt;/Location&gt;
1469
1470 &lt;Location /printers/name&gt;
1471 ...
1472 &lt;/Location&gt;
1473
1474 </PRE>
1475
1476 <H3>Description</H3>
1477
1478 <P>The <CODE>Location</CODE> directive specifies access control
1479 and authentication options for the specified HTTP resource or
1480 path.  The  <A HREF="#Allow"><CODE>Allow</CODE></A>,  <A
1481 HREF="#AuthType"><CODE>AuthType</CODE></A>,  <A
1482 HREF="#Deny"><CODE>Deny</CODE></A>,  <A
1483 HREF="#Encryption"><CODE>Encryption</CODE></A>,  <A
1484 HREF="#Limit"><CODE>Limit</CODE></A>,  <A
1485 HREF="#LimitExcept"><CODE>LimitExcept</CODE></A>,  <A
1486 HREF="#Order"><CODE>Order</CODE></A>,  <A
1487 HREF="#Require"><CODE>Require</CODE></A>, and <A
1488 HREF="#Satisfy"><CODE>Satisfy</CODE></A> directives may all
1489 appear inside a location.</P>
1490
1491 <P>Note that more specific resources override the less specific
1492 ones. So the directives inside the <CODE>/printers/name</CODE>
1493 location will override ones from <CODE>/printers</CODE>.
1494 Directives inside <CODE>/printers</CODE> will override ones from
1495 <CODE>/</CODE>. None of the directives are inherited.</P>
1496
1497 <DIV CLASS="table"><TABLE SUMMARY="Common Locations on the Server">
1498 <CAPTION>Table 3: <A NAME="TABLE3">Common Locations on the Server</A></CAPTION>
1499 <THEAD>
1500 <TR><TH>Location</TH><TH>Description</TH></TR>
1501 </THEAD>
1502 <TBODY>
1503 <TR><TD><CODE>/</CODE></TD><TD>The path for all get operations (get-printers, get-jobs, etc.)</TD></TR>
1504 <TR><TD><CODE>/admin</CODE></TD><TD>The path for all administration operations (add-printer, delete-printer, start-printer, etc.)</TD></TR>
1505 <TR><TD><CODE>/admin/conf</CODE></TD><TD>The path for access to the CUPS configuration files (cupsd.conf, client.conf, etc.)</TD></TR>
1506 <TR><TD><CODE>/admin/log</CODE></TD><TD>The path for access to the CUPS log files (access_log, error_log, page_log)</TD></TR>
1507 <TR><TD><CODE>/classes</CODE></TD><TD>The path for all classes</TD></TR>
1508 <TR><TD><CODE>/classes/name</CODE></TD><TD>The resource for class <CODE>name</CODE></TD></TR>
1509 <TR><TD><CODE>/jobs</CODE></TD><TD>The path for all jobs (hold-job, release-job, etc.)</TD></TR>
1510 <TR><TD><CODE>/jobs/id</CODE></TD><TD>The resource for job <CODE>id</CODE></TD></TR>
1511 <TR><TD><CODE>/printers</CODE></TD><TD>The path for all printers</TD></TR>
1512 <TR><TD><CODE>/printers/name</CODE></TD><TD>The path for printer <CODE>name</CODE></TD></TR>
1513 <TR><TD><CODE>/printers/name.ppd</CODE></TD><TD>The PPD file path for printer <CODE>name</CODE></TD></TR>
1514 </TBODY>
1515 </TABLE></DIV>
1516
1517
1518 <H2 CLASS="title"><A NAME="LogDebugHistory">LogDebugHistory</A></H2>
1519
1520 <H3>Examples</H3>
1521
1522 <PRE CLASS="command">
1523 LogDebugHistory 0
1524 LogDebugHistory 200
1525 </PRE>
1526
1527 <H3>Description</H3>
1528
1529 <P>When <A HREF="#LogLevel"><CODE>LogLevel</CODE></A> is not set to
1530 <CODE>debug</CODE> or <CODE>debug2</CODE>, the <CODE>LogDebugHistory</CODE>
1531 directive specifies the number of debugging messages that are logged when an
1532 error occurs during printing. The default is 200 messages. A value of 0
1533 disables debugging history entirely and is not recommended.</P>
1534
1535
1536 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.15</SPAN><A NAME="LogFilePerm">LogFilePerm</A></H2>
1537
1538 <H3>Examples</H3>
1539
1540 <PRE CLASS="command">
1541 LogFilePerm 0644
1542 LogFilePerm 0600
1543 </PRE>
1544
1545 <H3>Description</H3>
1546
1547 <P>The <CODE>LogFilePerm</CODE> directive specifies the
1548 permissions to use when writing log files. The default
1549 is @CUPS_LOG_FILE_PERM@.</P>
1550
1551
1552 <H2 CLASS="title"><A NAME="LogLevel">LogLevel</A></H2>
1553
1554 <H3>Examples</H3>
1555
1556 <PRE CLASS="command">
1557 LogLevel none
1558 LogLevel emerg
1559 LogLevel alert
1560 LogLevel crit
1561 LogLevel error
1562 LogLevel warn
1563 LogLevel notice
1564 LogLevel info
1565 LogLevel debug
1566 LogLevel debug2
1567 </PRE>
1568
1569 <H3>Description</H3>
1570
1571 <P>The <CODE>LogLevel</CODE> directive specifies the level of
1572 logging for the <A HREF="#ErrorLog"><CODE>ErrorLog</CODE></A>
1573 file. The following values are recognized (each level logs
1574 everything under the preceding levels):</P>
1575
1576 <UL>
1577
1578         <LI><CODE>none</CODE> - Log nothing</LI>
1579
1580         <LI><CODE>emerg</CODE> - Log emergency conditions that
1581         prevent the server from running</LI>
1582
1583         <LI><CODE>alert</CODE> - Log alerts that must be handled
1584         immediately</LI>
1585
1586         <LI><CODE>crit</CODE> - Log critical errors that don't
1587         prevent the server from running</LI>
1588
1589         <LI><CODE>error</CODE> - Log general errors</LI>
1590
1591         <LI><CODE>warn</CODE> - Log errors and warnings</LI>
1592
1593         <LI><CODE>notice</CODE> - Log temporary error conditions</LI>
1594
1595         <LI><CODE>info</CODE> - Log all requests and state
1596         changes</LI>
1597
1598         <LI><CODE>debug</CODE> - Log basic debugging
1599         information</LI>
1600
1601         <LI><CODE>debug2</CODE> - Log all debugging
1602         information</LI>
1603
1604 </UL>
1605
1606 <p>The default <code>LogLevel</code> is <code>@CUPS_LOG_LEVEL@</code>.</p>
1607
1608
1609 <H2 CLASS="title"><A NAME="LogTimeFormat">LogTimeFormat</A></H2>
1610
1611 <H3>Examples</H3>
1612
1613 <PRE CLASS="command">
1614 LogTimeFormat standard
1615 LogTimeFormat usecs
1616 </PRE>
1617
1618 <H3>Description</H3>
1619
1620 <P>The <CODE>LogTimeFormat</CODE> directive specifies the format used for the
1621 date and time in the log files. <CODE>Standard</CODE> uses the standard Apache
1622 Common Log Format date and time while <CODE>usecs</CODE> adds microseconds.
1623 The default is <CODE>standard</CODE>.</P>
1624
1625
1626 <H2 CLASS="title"><A NAME="MaxClients">MaxClients</A></H2>
1627
1628 <H3>Examples</H3>
1629
1630 <PRE CLASS="command">
1631 MaxClients 100
1632 MaxClients 1024
1633 </PRE>
1634
1635 <H3>Description</H3>
1636
1637 <P>The <CODE>MaxClients</CODE> directive controls the maximum
1638 number of simultaneous clients that will be allowed by the
1639 server. The default is 100 clients.</P>
1640
1641 <BLOCKQUOTE><B>Note:</B>
1642
1643 <P>Since each print job requires a file descriptor for the status
1644 pipe, the scheduler internally limits the <CODE>MaxClients</CODE>
1645 value to 1/3 of the available file descriptors to avoid possible
1646 problems when printing large numbers of jobs.</P>
1647
1648 </BLOCKQUOTE>
1649
1650
1651 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.18</SPAN><A NAME="MaxClientsPerHost">MaxClientsPerHost</A></H2>
1652
1653 <H3>Examples</H3>
1654
1655 <PRE CLASS="command">
1656 MaxClientsPerHost 10
1657 </PRE>
1658
1659 <H3>Description</H3>
1660
1661 <P>The <CODE>MaxClientsPerHost</CODE> directive controls the
1662 maximum number of simultaneous clients that will be allowed from
1663 a single host by the server. The default is the
1664 <CODE>MaxClients</CODE> value.</P>
1665
1666 <P>This directive provides a small measure of protection against
1667 Denial of Service attacks from a single host.</P>
1668
1669
1670 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.16</SPAN><A NAME="MaxCopies">MaxCopies</A></H2>
1671
1672 <H3>Examples</H3>
1673
1674 <PRE CLASS="command">
1675 MaxCopies 100
1676 MaxCopies 65535
1677 </PRE>
1678
1679 <H3>Description</H3>
1680
1681 <P>The <CODE>MaxCopies</CODE> directive controls the maximum
1682 number of copies that a user can print of a job. The default is
1683 @CUPS_MAX_COPIES@ copies.</P>
1684
1685 <BLOCKQUOTE><B>Note:</B>
1686
1687 <P>Most HP PCL laser printers internally limit the number of
1688 copies to 100.</P>
1689
1690 </BLOCKQUOTE>
1691
1692
1693 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.6/OS X 10.8</SPAN><A NAME="MaxHoldTime">MaxHoldTime</A></H2>
1694
1695 <H3>Examples</H3>
1696
1697 <PRE CLASS="command">
1698 MaxHoldTime 10800
1699 MaxHoldTime 3h
1700 MaxHoldTime 180m
1701 MaxHoldTime 0
1702 </PRE>
1703
1704 <H3>Description</H3>
1705
1706 <P>The <CODE>MaxHoldTime</CODE> directive controls the maximum number of seconds allowed for a job to remain in the "indefinite" hold state. The job is canceled automatically if it remains held indefinitely longer than the specified time interval in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
1707
1708 <p>The default setting is <CODE>0</CODE> which disables this functionality.</P>
1709
1710
1711 <H2 CLASS="title"><A NAME="MaxJobs">MaxJobs</A></H2>
1712
1713 <H3>Examples</H3>
1714
1715 <PRE CLASS="command">
1716 MaxJobs 100
1717 MaxJobs 9999
1718 MaxJobs 0
1719 </PRE>
1720
1721 <H3>Description</H3>
1722
1723 <P>The <CODE>MaxJobs</CODE> directive controls the maximum number
1724 of jobs that are kept in memory. Once the number of jobs reaches
1725 the limit, the oldest completed job is automatically purged from
1726 the system to make room for the new one. If all of the known jobs
1727 are still pending or active then the new job will be
1728 rejected.</P>
1729
1730 <P>Setting the maximum size to 0 disables this functionality. The
1731 default setting is 500.</P>
1732
1733
1734 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="MaxJobsPerPrinter">MaxJobsPerPrinter</A></H2>
1735
1736 <H3>Examples</H3>
1737
1738 <PRE CLASS="command">
1739 MaxJobsPerPrinter 100
1740 MaxJobsPerPrinter 9999
1741 MaxJobsPerPrinter 0
1742 </PRE>
1743
1744 <H3>Description</H3>
1745
1746 <P>The <CODE>MaxJobsPerPrinter</CODE> directive controls the
1747 maximum number of active jobs that are allowed for each printer
1748 or class. Once a printer or class reaches the limit, new jobs
1749 will be rejected until one of the active jobs is completed,
1750 stopped, aborted, or canceled.</P>
1751
1752 <P>Setting the maximum to 0 disables this functionality. The
1753 default setting is 0.</P>
1754
1755
1756 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="MaxJobsPerUser">MaxJobsPerUser</A></H2>
1757
1758 <H3>Examples</H3>
1759
1760 <PRE CLASS="command">
1761 MaxJobsPerUser 100
1762 MaxJobsPerUser 9999
1763 MaxJobsPerUser 0
1764 </PRE>
1765
1766 <H3>Description</H3>
1767
1768 <P>The <CODE>MaxJobsPerUser</CODE> directive controls the maximum
1769 number of active jobs that are allowed for each user. Once a user
1770 reaches the limit, new jobs will be rejected until one of the
1771 active jobs is completed, stopped, aborted, or canceled.</P>
1772
1773 <P>Setting the maximum to 0 disables this functionality. The
1774 default setting is 0.</P>
1775
1776
1777 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.6/OS X 10.8</SPAN><A NAME="MaxJobTime">MaxJobTime</A></H2>
1778
1779 <H3>Examples</H3>
1780
1781 <PRE CLASS="command">
1782 MaxJobTime 10800
1783 MaxJobTime 3h
1784 MaxJobTime 180m
1785 MaxJobTime 0
1786 </PRE>
1787
1788 <H3>Description</H3>
1789
1790 <P>The <CODE>MaxJobTime</CODE> directive controls the maximum number of
1791 seconds allowed for a job to complete printing before it is considered "stuck".
1792 The job is canceled automatically if it takes longer than the specified time to complete in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
1793
1794 <p>Setting the maximum time to <CODE>0</CODE> disables this functionality. The default setting is <CODE>3h</CODE> (3 hours).</P>
1795
1796
1797 <H2 CLASS="title"><A NAME="MaxLogSize">MaxLogSize</A></H2>
1798
1799 <H3>Examples</H3>
1800
1801 <PRE CLASS="command">
1802 MaxLogSize 1048576
1803 MaxLogSize 1m
1804 MaxLogSize 0
1805 </PRE>
1806
1807 <H3>Description</H3>
1808
1809 <P>The <CODE>MaxLogSize</CODE> directive controls the maximum
1810 size of each log file. Once a log file reaches or exceeds the
1811 maximum size it is closed and renamed to <VAR>filename.O</VAR>.
1812 This allows you to rotate the logs automatically. The default
1813 size is 1048576 bytes (1MB).</P>
1814
1815 <P>Setting the maximum size to 0 disables log rotation.</P>
1816
1817
1818 <H2 CLASS="title"><SPAN CLASS="info">Deprecated</SPAN><A NAME="MaxRequestSize">MaxRequestSize</A></H2>
1819
1820 <H3>Examples</H3>
1821
1822 <PRE CLASS="command">
1823 MaxRequestSize 10485760
1824 MaxRequestSize 10m
1825 MaxRequestSize 0
1826 </PRE>
1827
1828 <H3>Description</H3>
1829
1830 <P>The <CODE>MaxRequestSize</CODE> directive controls the maximum
1831 size of print files, IPP requests, and HTML form data in HTTP
1832 POST requests. The default limit is 0 which disables the limit
1833 check.</P>
1834
1835 <P><B>This directive is deprecated and will be removed in a
1836 future CUPS release.</B> Use the <A
1837 HREF="#LimitRequestBody"><CODE>LimitRequestBody</CODE></A>
1838 directive instead.</P>
1839
1840
1841 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.4/OS X 10.6</SPAN><A NAME="MultipleOperationTimeout">MultipleOperationTimeout</A></H2>
1842
1843 <H3>Examples</H3>
1844
1845 <PRE CLASS="command">
1846 MultipleOperationTimeout 1w
1847 MultipleOperationTimeout 1d
1848 MultipleOperationTimeout 1h
1849 MultipleOperationTimeout 5m
1850 MultipleOperationTimeout 300
1851 </PRE>
1852
1853 <H3>Description</H3>
1854
1855 <P>The <CODE>MultipleOperationTimeout</CODE> directive sets the maximum amount of time between files in a multi-file print job in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
1856
1857 <P>The default is <CODE>5m</CODE> (five minutes).</P>
1858
1859
1860 <H2 CLASS="title"><A NAME="Order">Order</A></H2>
1861
1862 <H3>Examples</H3>
1863
1864 <PRE CLASS="command">
1865 &lt;Location /path&gt;
1866   ...
1867   Order Allow,Deny
1868   Order Deny,Allow
1869 &lt;/Location&gt;
1870 </PRE>
1871
1872 <H3>Description</H3>
1873
1874 <P>The <CODE>Order</CODE> directive defines the default access
1875 control. The following values are supported:</P>
1876
1877 <UL>
1878
1879         <LI><CODE>allow,deny</CODE> - Deny requests by default,
1880         then check the <A HREF="#Allow"><CODE>Allow</CODE></A>
1881         lines followed by the <A
1882         HREF="#Deny"><CODE>Deny</CODE></A> lines</LI>
1883
1884         <LI><CODE>deny,allow</CODE> - Allow requests by default,
1885         then check the <A HREF="#Deny"><CODE>Deny</CODE></A>
1886         lines followed by the <A
1887         HREF="#Allow"><CODE>Allow</CODE></A> lines</LI>
1888
1889 </UL>
1890
1891 <P>The <CODE>Order</CODE> directive must appear inside a <A
1892 HREF="#Location"><CODE>Location</CODE></A> or <A
1893 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
1894
1895
1896 <H2 CLASS="title"><A NAME="PageLog">PageLog</A></H2>
1897
1898 <H3>Examples</H3>
1899
1900 <PRE CLASS="command">
1901 PageLog /var/log/cups/page_log
1902 PageLog /var/log/cups/page_log-%s
1903 PageLog syslog
1904 </PRE>
1905
1906 <H3>Description</H3>
1907
1908 <P>The <CODE>PageLog</CODE> directive sets the name of the page
1909 log file. If the filename is not absolute then it is assumed to
1910 be relative to the <A
1911 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
1912 default page log file is <VAR>@CUPS_LOGDIR@/page_log</VAR>.</P>
1913
1914 <P>The server name can be included in the filename by using
1915 <CODE>%s</CODE> in the name.</P>
1916
1917 <P>The special name "syslog" can be used to send the page
1918 information to the system log instead of a plain file.</P>
1919
1920
1921 <H2 CLASS="title"><A NAME="PageLogFormat">PageLogFormat</A></H2>
1922
1923 <H3>Examples</H3>
1924
1925 <PRE CLASS="command">
1926 PageLogFormat %p %u %j %T %P %C %{job-billing} %{job-originating-host-name} %{job-name} %{media} %{sides}
1927 PageLogFormat PAGE %p %u %j %P %C %{job-billing} %{job-originating-host-name}
1928 </PRE>
1929
1930 <H3>Description</H3>
1931
1932 <P>The <CODE>PageLogFormat</CODE> directive sets the format of lines
1933 that are logged to the page log file. Sequences beginning with percent (%)
1934 characters are replaced with the corresponding information, while all other
1935 characters are copied literally. The following percent sequences are
1936 recognized:</P>
1937
1938 <UL>
1939
1940         <LI><CODE>%%</CODE>: Inserts a single percent character.</LI>
1941
1942         <LI><CODE>%{name}</CODE>: Inserts the value of the specified IPP
1943         attribute.</LI>
1944
1945         <LI><CODE>%C</CODE>: Inserts the number of copies for the current page.</LI>
1946
1947         <LI><CODE>%P</CODE>: Inserts the current page number.</LI>
1948
1949         <LI><CODE>%T</CODE>: Inserts the current date and time in common log
1950         format.</LI>
1951
1952         <LI><CODE>%j</CODE>: Inserts the job ID.</LI>
1953
1954         <LI><CODE>%p</CODE>: Inserts the printer name.</LI>
1955
1956         <LI><CODE>%u</CODE>: Inserts the username.</LI>
1957
1958 </UL>
1959
1960 <P>The default is "%p %u %j %T %P %C %{job-billing} %{job-originating-host-name} %{job-name} %{media} %{sides}".</P>
1961
1962
1963 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="PassEnv">PassEnv</A></H2>
1964
1965 <H3>Examples</H3>
1966
1967 <PRE CLASS="command">
1968 PassEnv MY_ENV_VARIABLE
1969 </PRE>
1970
1971 <H3>Description</H3>
1972
1973 <P>The <CODE>PassEnv</CODE> directive specifies an environment
1974 variable that should be passed to child processes. Normally, the
1975 scheduler only passes the <CODE>DYLD_LIBRARY_PATH</CODE>,
1976 <CODE>LD_ASSUME_KERNEL</CODE>, <CODE>LD_LIBRARY_PATH</CODE>,
1977 <CODE>LD_PRELOAD</CODE>, <CODE>NLSPATH</CODE>,
1978 <CODE>SHLIB_PATH</CODE>, <CODE>TZ</CODE>, and <CODE>VGARGS</CODE>
1979 environment variables to child processes.</P>
1980
1981
1982 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="Policy">Policy</A></H2>
1983
1984 <H3>Examples</H3>
1985
1986 <PRE CLASS="command">
1987 &lt;Policy name&gt;
1988   &lt;Limit operation ... operation&gt;
1989   ...
1990   &lt;/Limit&gt;
1991   &lt;Limit operation ... operation&gt;
1992   ...
1993   &lt;/Limit&gt;
1994   &lt;Limit All&gt;
1995   ...
1996   &lt;/Limit&gt;
1997 &lt;/Policy&gt;
1998 </PRE>
1999
2000 <H3>Description</H3>
2001
2002 <P>The <CODE>Policy</CODE> directive specifies IPP operation
2003 access control limits. Each policy contains 1 or more <A
2004 HREF="#LimitIPP"><CODE>Limit</CODE></A> sections to set the
2005 access control limits for specific operations - user limits,
2006 authentication, encryption, and allowed/denied addresses,
2007 domains, or hosts. The <CODE>&lt;Limit All&gt;</CODE> section
2008 specifies the default access control limits for operations that
2009 are not listed.</P>
2010
2011 <P>Policies are named and associated with printers via the
2012 printer's operation policy setting
2013 (<CODE>printer-op-policy</CODE>). The default policy for the
2014 scheduler is specified using the <A
2015 HREF="#DefaultPolicy"><CODE>DefaultPolicy</CODE></A>
2016 directive.</P>
2017
2018
2019 <H2 CLASS="title"><A NAME="Port">Port</A></H2>
2020
2021 <H3>Examples</H3>
2022
2023 <PRE CLASS="command">
2024 Port 631
2025 Port 80
2026 </PRE>
2027
2028 <H3>Description</H3>
2029
2030 <P>The <CODE>Port</CODE> directive specifies a port to listen on.
2031 Multiple <CODE>Port</CODE> lines can be specified to listen on
2032 multiple ports. The <CODE>Port</CODE> directive is equivalent to
2033 "<CODE>Listen *:nnn</CODE>". The default port is 631.</P>
2034
2035 <BLOCKQUOTE><B>Note:</B>
2036
2037 <P>On systems that support IPv6, this directive will bind to both
2038 the IPv4 and IPv6 wildcard address.</P>
2039
2040 </BLOCKQUOTE>
2041
2042
2043 <H2 CLASS="title"><A NAME="PreserveJobHistory">PreserveJobHistory</A></H2>
2044
2045 <H3>Examples</H3>
2046
2047 <PRE CLASS="command">
2048 PreserveJobHistory On
2049 PreserveJobHistory Off
2050 PreserveJobHistory 1w
2051 PreserveJobHistory 7d
2052 PreserveJobHistory 168h
2053 PreserveJobHistory 10080m
2054 PreserveJobHistory 604800
2055 </PRE>
2056
2057 <H3>Description</H3>
2058
2059 <P>The <CODE>PreserveJobHistory</CODE> directive controls whether the history of completed, canceled, or aborted print jobs is retained by the scheduler. A value of <CODE>On</CODE> preserves job information until the administrator purges it with the <CODE>cancel</CODE> command. A value of <CODE>Off</CODE> removes the job information as soon as each job is completed, canceled, or aborted. Numeric values preserve job information for the specified number of seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
2060
2061 <P>The default value is <CODE>On</CODE>.</P>
2062
2063 <BLOCKQUOTE><B>Note:</B>
2064
2065 <P>The <A HREF="#MaxJobs"><CODE>MaxJobs</CODE></A>, <A HREF="#MaxJobsPerPrinter"><CODE>MaxJobsPerPrinter</CODE></A>, and <A HREF="#MaxJobsPerUser"><CODE>MaxJobsPerUser</CODE></A> directives can cause job history to be discarded to make room for new jobs.</P>
2066
2067 </BLOCKQUOTE>
2068
2069
2070 <H2 CLASS="title"><A NAME="PreserveJobFiles">PreserveJobFiles</A></H2>
2071
2072 <H3>Examples</H3>
2073
2074 <PRE CLASS="command">
2075 PreserveJobFiles On
2076 PreserveJobFiles Off
2077 PreserveJobFiles 1w
2078 PreserveJobFiles 7d
2079 PreserveJobFiles 168h
2080 PreserveJobFiles 10080m
2081 PreserveJobFiles 604800
2082 </PRE>
2083
2084 <H3>Description</H3>
2085
2086 <P>The <CODE>PreserveJobFiles</CODE> directive controls whether the document files of completed, canceled, or aborted print jobs are retained. Jobs can be restarted (and reprinted) as desired until they are purged.</P>
2087
2088 <P>A value of <CODE>On</CODE> preserves job files until the administrator purges them with the <CODE>cancel</CODE> command. A value of <CODE>Off</CODE> removes the job files as soon as each job is completed, canceled, or aborted. Numeric values preserve job files for the specified number of seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
2089
2090 <P>The default value is <CODE>1d</CODE> (one day).</P>
2091
2092 <BLOCKQUOTE><B>Note:</B>
2093
2094 <P>The <A HREF="#MaxJobs"><CODE>MaxJobs</CODE></A>, <A HREF="#MaxJobsPerPrinter"><CODE>MaxJobsPerPrinter</CODE></A>, <A HREF="#MaxJobsPerUser"><CODE>MaxJobsPerUser</CODE></A>, and <A HREF="#PreserveJobHistory"><CODE>PreserveJobHistory</CODE></A> directives can cause job files to be discarded sooner than specified.</P>
2095
2096 </BLOCKQUOTE>
2097
2098
2099 <H2 CLASS="title"><A NAME="Printcap">Printcap</A></H2>
2100
2101 <H3>Examples</H3>
2102
2103 <PRE CLASS="command">
2104 Printcap
2105 Printcap /etc/printcap
2106 Printcap /etc/printers.conf
2107 Printcap /Library/Preferences/org.cups.printers.plist
2108 </PRE>
2109
2110 <H3>Description</H3>
2111
2112 <P>The <CODE>Printcap</CODE> directive controls whether or not a
2113 printcap file is automatically generated and updated with a list
2114 of available printers. If specified with no value, then no
2115 printcap file will be generated. The default is to generate a
2116 file named <VAR>@CUPS_DEFAUL_PRINTCAP@</VAR>.</P>
2117
2118 <P>When a filename is specified (e.g. <VAR>@CUPS_DEFAULT_PRINTCAP@</VAR>),
2119 the printcap file is written whenever a printer is added or
2120 removed. The printcap file can then be used by applications that
2121 are hardcoded to look at the printcap file for the available
2122 printers.</P>
2123
2124
2125 <H2 CLASS="title"><A NAME="PrintcapFormat">PrintcapFormat</A></H2>
2126
2127 <H3>Examples</H3>
2128
2129 <PRE CLASS="command">
2130 PrintcapFormat BSD
2131 PrintcapFormat Solaris
2132 PrintcapFormat plist
2133 </PRE>
2134
2135 <H3>Description</H3>
2136
2137 <P>The <CODE>PrintcapFormat</CODE> directive controls the output format of the
2138 printcap file. The default is to generate the plist format on OS X, the
2139 Solaris format on Solaris, and the BSD format on other operating systems.</P>
2140
2141
2142 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.21</SPAN><A NAME="ReloadTimeout">ReloadTimeout</A></H2>
2143
2144 <H3>Examples</H3>
2145
2146 <PRE CLASS="command">
2147 ReloadTimeout 0
2148 ReloadTimeout 30
2149 </PRE>
2150
2151 <H3>Description</H3>
2152
2153 <P>The <CODE>ReloadTimeout</CODE> directive specifies the number
2154 of seconds the scheduler will wait for active jobs to complete
2155 before doing a restart. The default is 30 seconds.</P>
2156
2157
2158 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.3</SPAN><A NAME="RemoteRoot">RemoteRoot</A></H2>
2159
2160 <H3>Examples</H3>
2161
2162 <PRE CLASS="command">
2163 RemoteRoot remroot
2164 RemoteRoot root
2165 </PRE>
2166
2167 <H3>Description</H3>
2168
2169 <P>The <CODE>RemoteRoot</CODE> directive sets the username for
2170 unauthenticated root requests from remote hosts. The default
2171 username is <VAR>remroot</VAR>. Setting <CODE>RemoteRoot</CODE>
2172 to <VAR>root</VAR> effectively disables this security
2173 mechanism.</P>
2174
2175
2176 <H2 CLASS="title"><A NAME="RequestRoot">RequestRoot</A></H2>
2177
2178 <H3>Examples</H3>
2179
2180 <PRE CLASS="command">
2181 RequestRoot /var/spool/cups
2182 RequestRoot /foo/bar/spool/cups
2183 </PRE>
2184
2185 <H3>Description</H3>
2186
2187 <P>The <CODE>RequestRoot</CODE> directive sets the directory for
2188 incoming IPP requests and HTML forms. If an absolute path is not
2189 provided then it is assumed to be relative to the <A
2190 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
2191 default request directory is <VAR>@CUPS_REQUESTS@</VAR>.</P>
2192
2193
2194 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="Require">Require</A></H2>
2195
2196 <H3>Examples</H3>
2197
2198 <PRE CLASS="command">
2199 &lt;Location /path&gt;
2200   ...
2201   Require group foo bar
2202   Require user john mary
2203   Require valid-user
2204   Require user @groupname
2205   Require user @SYSTEM
2206   Require user @OWNER
2207 &lt;/Location&gt;
2208 </PRE>
2209
2210 <H3>Description</H3>
2211
2212 <P>The <CODE>Require</CODE> directive specifies that
2213 authentication is required for the resource. The
2214 <CODE>group</CODE> keyword specifies that the authenticated user
2215 must be a member of one or more of the named groups that
2216 follow.</P>
2217
2218 <P>The <CODE>user</CODE> keyword specifies that the
2219 authenticated user must be one of the named users or groups that
2220 follow. Group names are specified using the "@" prefix.</P>
2221
2222 <P>The <CODE>valid-user</CODE> keyword specifies that any
2223 authenticated user may access the resource.</P>
2224
2225 <P>The default is to do no authentication. This directive must
2226 appear inside a <A HREF="#Location"><CODE>Location</CODE></A> or
2227 <A HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
2228
2229
2230 <H2 CLASS="title"><A NAME="RIPCache">RIPCache</A></H2>
2231
2232 <H3>Examples</H3>
2233
2234 <PRE CLASS="command">
2235 RIPCache 128m
2236 RIPCache 1g
2237 RIPCache 2048k
2238 </PRE>
2239
2240 <H3>Description</H3>
2241
2242 <P>The <CODE>RIPCache</CODE> directive sets the size of the
2243 memory cache used by Raster Image Processor ("RIP") filters such
2244 as <CODE>imagetoraster</CODE> and <CODE>pstoraster</CODE>. The
2245 size can be suffixed with a "k" for kilobytes, "m" for megabytes,
2246 or "g" for gigabytes. The default cache size is "128m", or 128
2247 megabytes.</P>
2248
2249
2250 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.16</SPAN><A NAME="RootCertDuration">RootCertDuration</A></H2>
2251
2252 <H3>Examples</H3>
2253
2254 <PRE CLASS="command">
2255 RootCertDuration 0
2256 RootCertDuration 1w
2257 RootCertDuration 1d
2258 RootCertDuration 1h
2259 RootCertDuration 5m
2260 RootCertDuration 300
2261 </PRE>
2262
2263 <H3>Description</H3>
2264
2265 <P>The <CODE>RootCertDuration</CODE> directive specifies the amount of time the <EM>root certificate</EM> remains valid in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix). The scheduler will generate a new certificate as needed when the given time interval has expired. If set to 0, the root certificate is generated only once on startup or on a restart.</P>
2266
2267 <P>The default is <CODE>5m</CODE> (five minutes).</P>
2268
2269
2270 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.7</SPAN><A NAME="Satisfy">Satisfy</A></H2>
2271
2272 <H3>Examples</H3>
2273
2274 <PRE CLASS="command">
2275 &lt;Location /path&gt;
2276   ...
2277   Satisfy all
2278   Satisfy any
2279 &lt;/Location&gt;
2280 </PRE>
2281
2282 <H3>Description</H3>
2283
2284 <P>The <CODE>Satisfy</CODE> directive specifies whether all
2285 conditions must be satisfied to allow access to the resource. If
2286 set to <CODE>all</CODE>, then all authentication and access
2287 control conditions must be satisfied to allow access.</P>
2288
2289 <P>Setting <CODE>Satisfy</CODE> to <CODE>any</CODE> allows a user
2290 to gain access if the authentication or access control
2291 requirements are satisfied. For example, you might require
2292 authentication for remote access, but allow local access without
2293 authentication.</P>
2294
2295 <P>The default is <CODE>all</CODE>. This directive must appear
2296 inside a <A HREF="#Location"><CODE>Location</CODE></A> or <A
2297 HREF="#Limit"><CODE>Limit</CODE></A> section.</P>
2298
2299
2300 <H2 CLASS="title"><A NAME="ServerAdmin">ServerAdmin</A></H2>
2301
2302 <H3>Examples</H3>
2303
2304 <PRE CLASS="command">
2305 ServerAdmin user@host
2306 ServerAdmin root@foo.bar.com
2307 </PRE>
2308
2309 <H3>Description</H3>
2310
2311 <P>The <CODE>ServerAdmin</CODE> directive identifies the email
2312 address for the administrator on the system. By default the
2313 administrator email address is <CODE>root@server</CODE>, where
2314 <CODE>server</CODE> is the <A
2315 HREF="#ServerName"><CODE>ServerName</CODE></A>.</P>
2316
2317
2318 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.3.10</SPAN><A NAME="ServerAlias">ServerAlias</A></H2>
2319
2320 <H3>Examples</H3>
2321
2322 <PRE CLASS="command">
2323 ServerAlias althost
2324 ServerAlias foo.example.com
2325 ServerAlias bar.example.com
2326 ServerAlias one.example.com two.example.com
2327 ServerAlias *
2328 </PRE>
2329
2330 <H3>Description</H3>
2331
2332 <P>The <CODE>ServerAlias</CODE> directive specifies alternate names that the server is known by. By default it contains a list of all aliases associated with the <A HREF="#ServerName"><CODE>ServerName</CODE></A>. The special name "*" can be used to allow any hostname when accessing CUPS via an external network interfaces.</P>
2333
2334 <BLOCKQUOTE><B>Note</B>
2335
2336 <P>The <CODE>ServerAlias</CODE> directive is used for HTTP Host header
2337 validation when clients connect to the scheduler from external interfaces.
2338 Using the special name "*" can expose your system to known browser-based
2339 DNS rebinding attacks, even when accessing sites through a firewall. If the
2340 auto-discovery of alternate names does not work, we recommend listing each
2341 alternate name with a ServerAlias directive instead of using "*".</P>
2342
2343 </BLOCKQUOTE>
2344
2345
2346 <H2 CLASS="title"><A NAME="ServerBin">ServerBin</A></H2>
2347
2348 <H3>Examples</H3>
2349
2350 <PRE CLASS="command">
2351 ServerBin /usr/lib/cups
2352 ServerBin /foo/bar/lib/cups
2353 </PRE>
2354
2355 <H3>Description</H3>
2356
2357 <P>The <CODE>ServerBin</CODE> directive sets the directory for
2358 server-run executables. If an absolute path is not provided then
2359 it is assumed to be relative to the <A
2360 HREF="#ServerRoot"><CODE>ServerRoot</CODE></A> directory. The
2361 default executable directory is <VAR>/usr/lib/cups</VAR>,
2362 <VAR>/usr/lib32/cups</VAR>, or <VAR>/usr/libexec/cups</VAR>
2363 depending on the operating system.</P>
2364
2365
2366 <H2 CLASS="title"><A NAME="ServerCertificate">ServerCertificate</A></H2>
2367
2368 <H3>Examples</H3>
2369
2370 <PRE CLASS="command">
2371 ServerCertificate /etc/cups/ssl/server.crt
2372 </PRE>
2373
2374 <H3>Description</H3>
2375
2376 <P>The <CODE>ServerCertificate</CODE> directive specifies the
2377 location of the SSL certificate file used by the server when
2378 negotiating encrypted connections. The certificate must not be
2379 encrypted (password protected) since the scheduler normally runs
2380 in the background and will be unable to ask for a password.</P>
2381
2382 <P>The default certificate file is
2383 <VAR>/etc/cups/ssl/server.crt</VAR>.</P>
2384
2385
2386 <H2 CLASS="title"><A NAME="ServerKey">ServerKey</A></H2>
2387
2388 <H3>Examples</H3>
2389
2390 <PRE CLASS="command">
2391 ServerKey /etc/cups/ssl/server.key
2392 </PRE>
2393
2394 <H3>Description</H3>
2395
2396 <P>The <CODE>ServerKey</CODE> directive specifies the location of
2397 the SSL private key file used by the server when negotiating
2398 encrypted connections.</P>
2399
2400 <P>The default key file is
2401 <VAR>/etc/cups/ssl/server.crt</VAR>.</P>
2402
2403
2404 <H2 CLASS="title"><A NAME="ServerName">ServerName</A></H2>
2405
2406 <H3>Examples</H3>
2407
2408 <PRE CLASS="command">
2409 ServerName foo.example.com
2410 ServerName myserver.example.com
2411 </PRE>
2412
2413 <H3>Description</H3>
2414
2415 <P>The <CODE>ServerName</CODE> directive specifies the hostname
2416 that is reported to clients. By default the server name is the
2417 hostname.</P>
2418
2419
2420 <H2 CLASS="title"><A NAME="ServerRoot">ServerRoot</A></H2>
2421
2422 <H3>Examples</H3>
2423
2424 <PRE CLASS="command">
2425 ServerRoot /etc/cups
2426 ServerRoot /foo/bar/cups
2427 </PRE>
2428
2429 <H3>Description</H3>
2430
2431 <P>The <CODE>ServerRoot</CODE> directive specifies the absolute
2432 path to the server configuration and state files. It is also used
2433 to resolve relative paths in the <VAR>cupsd.conf</VAR> file. The
2434 default server directory is <VAR>/etc/cups</VAR>.</P>
2435
2436
2437 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.21</SPAN><A NAME="ServerTokens">ServerTokens</A></H2>
2438
2439 <H3>Examples</H3>
2440
2441 <PRE CLASS="command">
2442 ServerTokens None
2443 ServerTokens ProductOnly
2444 ServerTokens Major
2445 ServerTokens Minor
2446 ServerTokens Minimal
2447 ServerTokens OS
2448 ServerTokens Full
2449 </PRE>
2450
2451 <H3>Description</H3>
2452
2453 <P>The <CODE>ServerTokens</CODE> directive specifies the
2454 information that is included in the <CODE>Server:</CODE> header
2455 of all HTTP responses. Table 4 lists the token name along with
2456 the text that is returned. The default is
2457 <CODE>Minimal</CODE>.</P>
2458
2459 <DIV CLASS="table"><TABLE SUMMARY="ServerToken Names and Values">
2460 <CAPTION>Table 4: <A NAME="TABLE4">ServerToken Names and Values</A></CAPTION>
2461 <THEAD>
2462 <TR>
2463         <TH>Name</TH>
2464         <TH>Value</TH>
2465 </TR>
2466 </THEAD>
2467 <TBODY>
2468 <TR>
2469         <TD>None</TD>
2470         <TD>No <CODE>Server:</CODE> header is returned</TD>
2471 </TR>
2472 <TR>
2473         <TD>ProductOnly</TD>
2474         <TD>"CUPS"</TD>
2475 </TR>
2476 <TR>
2477         <TD>Major</TD>
2478         <TD>"CUPS 1"</TD>
2479 </TR>
2480 <TR>
2481         <TD>Minor</TD>
2482         <TD>"CUPS 1.2"</TD>
2483 </TR>
2484 <TR>
2485         <TD>Minimal</TD>
2486         <TD>"CUPS 1.2.N" where N is the patch release</TD>
2487 </TR>
2488 <TR>
2489         <TD>OS</TD>
2490         <TD>"CUPS 1.2.N (UNAME)" where N is the patch release and
2491         UNAME is the output of the <B>uname(1)</B> command</TD>
2492 </TR>
2493 <TR>
2494         <TD>Full</TD>
2495         <TD>"CUPS 1.2.N (UNAME) IPP/1.1" where N is the patch
2496         release and UNAME is the output of the <B>uname(1)</B>
2497         command</TD>
2498 </TR>
2499 </TBODY>
2500 </TABLE></DIV>
2501
2502
2503 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="SetEnv">SetEnv</A></H2>
2504
2505 <H3>Examples</H3>
2506
2507 <PRE CLASS="command">
2508 SetEnv PATH /usr/lib/cups/filter:/bin:/usr/bin:/usr/local/bin
2509 SetEnv MY_ENV_VAR foo
2510 </PRE>
2511
2512 <H3>Description</H3>
2513
2514 <P>The <CODE>SetEnv</CODE> directive specifies an environment
2515 variable that should be passed to child processes.</P>
2516
2517
2518 <H2 CLASS="title"><A NAME="SSLListen">SSLListen</A></H2>
2519
2520 <H3>Examples</H3>
2521
2522 <PRE CLASS="command">
2523 SSLListen 127.0.0.1:443
2524 SSLListen 192.0.2.1:443
2525 </PRE>
2526
2527 <H3>Description</H3>
2528
2529 <P>The <CODE>SSLListen</CODE> directive specifies a network
2530 address and port to listen for secure connections. Multiple
2531 <CODE>SSLListen</CODE> directives can be provided to listen on
2532 multiple addresses.</P>
2533
2534 <P>The <CODE>SSLListen</CODE> directive is similar to the <A
2535 HREF="#SSLPort"><CODE>SSLPort</CODE></A> directive but allows you
2536 to restrict access to specific interfaces or networks.</P>
2537
2538
2539 <H2 CLASS="title"><A NAME="SSLOptions">SSLOptions</A></H2>
2540
2541 <H3>Examples</H3>
2542
2543 <PRE CLASS="command">
2544 SSLOptions None
2545 SSLOptions NoEmptyFragments
2546 </PRE>
2547
2548 <H3>Description</H3>
2549
2550 <P>The <CODE>SSLOptions</CODE> directive specifies additional SSL/TLS
2551 protocol options to use for encrypted connected. Currently only two
2552 options are supported - <code>None</code> (the default) for the most
2553 secure mode and <code>NoEmptyFragments</code> to allow CUPS to work with
2554 Microsoft Windows with the FIPS conformance mode enabled.</p>
2555
2556
2557 <H2 CLASS="title"><A NAME="SSLPort">SSLPort</A></H2>
2558
2559 <H3>Examples</H3>
2560
2561 <PRE CLASS="command">
2562 SSLPort 443
2563 </PRE>
2564
2565 <H3>Description</H3>
2566
2567 <P>The <CODE>SSLPort</CODE> directive specifies a port to listen
2568 on for secure connections. Multiple <CODE>SSLPort</CODE> lines
2569 can be specified to listen on multiple ports.</P>
2570
2571
2572 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.6</SPAN><A NAME="StrictConformance">StrictConformance</A></H2>
2573
2574 <H3>Examples</H3>
2575
2576 <PRE CLASS="command">
2577 StrictConformance No
2578 StrictConformance Yes
2579 </PRE>
2580
2581 <H3>Description</H3>
2582
2583 <P>The <CODE>StrictConformance</CODE> directive specifies whether the scheduler
2584 requires strict IPP conformance for client requests, for example to not allow
2585 document attributes in a Create-Job request. The default is
2586 <code>No</code>.</P>
2587
2588
2589 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.5</SPAN><A NAME="SubscriptionPrivateAccess">SubscriptionPrivateAccess</A></H2>
2590
2591 <H3>Examples</H3>
2592
2593 <PRE CLASS="command">
2594 SubscriptionPrivateAccess all
2595 SubscriptionPrivateAccess default
2596 SubscriptionPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+
2597 </PRE>
2598
2599 <H3>Description</H3>
2600
2601 <P>The <CODE>SubscriptionPrivateAccess</CODE> directive specifies the access list for a
2602 subscription's private values. The "default" access list is "@OWNER @SYSTEM".
2603 "@ACL" maps to the printer's requesting-user-name-allowed or
2604 requesting-user-name-denied values.</P>
2605
2606 <P>The <CODE>SubscriptionPrivateAccess</CODE> directive must appear inside a <A
2607 HREF="#Policy"><CODE>Policy</CODE></A> section.</P>
2608
2609
2610 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.5</SPAN><A NAME="SubscriptionPrivateValues">SubscriptionPrivateValues</A></H2>
2611
2612 <H3>Examples</H3>
2613
2614 <PRE CLASS="command">
2615 SubscriptionPrivateValues all
2616 SubscriptionPrivateValues default
2617 SubscriptionPrivateValues none
2618 SubscriptionPrivateValues attribute-name-1 [ ... attribute-name-N ]
2619 </PRE>
2620
2621 <H3>Description</H3>
2622
2623 <P>The <CODE>SubscriptionPrivateValues</CODE> directive specifies the list of
2624 subscription values to make private. The "default" values are "notify-events",
2625 "notify-pull-method", "notify-recipient-uri", "notify-subscriber-user-name", and
2626 "notify-user-data".</P>
2627
2628 <P>The <CODE>SubscriptionPrivateValues</CODE> directive must appear inside a <A
2629 HREF="#Policy"><CODE>Policy</CODE></A> section.</P>
2630
2631
2632 <H2 CLASS="title"><A NAME="SystemGroup">SystemGroup</A></H2>
2633
2634 <H3>Examples</H3>
2635
2636 <PRE CLASS="command">
2637 SystemGroup lpadmin
2638 SystemGroup sys
2639 SystemGroup system
2640 SystemGroup root
2641 SystemGroup root lpadmin
2642 </PRE>
2643
2644 <H3>Description</H3>
2645
2646 <P>The <CODE>SystemGroup</CODE> directive specifies the system
2647 administration group for <CODE>System</CODE> authentication.
2648 Multiple groups can be listed, separated with spaces. The default
2649 group list is <CODE>@CUPS_SYSTEM_GROUPS@</CODE>.</P>
2650
2651
2652 <H2 CLASS="title"><A NAME="TempDir">TempDir</A></H2>
2653
2654 <H3>Examples</H3>
2655
2656 <PRE CLASS="command">
2657 TempDir /var/tmp
2658 TempDir /foo/bar/tmp
2659 </PRE>
2660
2661 <H3>Description</H3>
2662
2663 <P>The <CODE>TempDir</CODE> directive specifies an absolute path
2664 for the directory to use for temporary files. The default
2665 directory is <VAR>@CUPS_REQUESTS@/tmp</VAR>.</P>
2666
2667 <P>Temporary directories must be world-writable and should have
2668 the "sticky" permission bit enabled so that other users cannot
2669 delete filter temporary files. The following commands will create
2670 an appropriate temporary directory called
2671 <VAR>/foo/bar/tmp</VAR>:</P>
2672
2673 <PRE CLASS="command">
2674 <KBD>mkdir /foo/bar/tmp</KBD>
2675 <KBD>chmod a+rwxt /foo/bar/tmp</KBD>
2676 </PRE>
2677
2678
2679 <H2 CLASS="title"><A NAME="Timeout">Timeout</A></H2>
2680
2681 <H3>Examples</H3>
2682
2683 <PRE CLASS="command">
2684 Timeout 1w
2685 Timeout 1d
2686 Timeout 1h
2687 Timeout 5m
2688 Timeout 300
2689 </PRE>
2690
2691 <H3>Description</H3>
2692
2693 <P>The <CODE>Timeout</CODE> directive controls the amount of time
2694 to wait before an active HTTP or IPP request times out in seconds (no suffix), minutes ("m" suffix), hours ("h" suffix), days ("d" suffix), or weeks ("w" suffix).</P>
2695
2696 <P>The default timeout is <CODE>5m</CODE> (five minutes).</P>
2697
2698
2699 <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.2/OS X 10.5</SPAN><A NAME="UseNetworkDefault">UseNetworkDefault</A></H2>
2700
2701 <H3>Examples</H3>
2702
2703 <PRE CLASS="command">
2704 UseNetworkDefault yes
2705 UseNetworkDefault no
2706 </PRE>
2707
2708 <H3>Description</H3>
2709
2710 <P>The <CODE>UseNetworkDefault</CODE> directive controls whether
2711 the client will use a network/remote printer as a default
2712 printer. If enabled, the default printer of a server is used as
2713 the default printer on a client. When multiple servers are
2714 advertising a default printer, the client's default printer is
2715 set to the first discovered printer, or to the implicit class for
2716 the same printer available from multiple servers.</P>
2717
2718 <P>The default is <CODE>@CUPS_USE_NETWORK_DEFAULT@</CODE>.</P>
2719
2720
2721 <H2 CLASS="title"><A NAME="User">User</A></H2>
2722
2723 <H3>Examples</H3>
2724
2725 <PRE CLASS="command">
2726 User lp
2727 User guest
2728 </PRE>
2729
2730 <H3>Description</H3>
2731
2732 <P>The <CODE>User</CODE> directive specifies the UNIX user that
2733 filter and CGI programs run as. The default user is
2734 <CODE>@CUPS_USER@</CODE>.</P>
2735
2736 <BLOCKQUOTE><B>Note:</B>
2737
2738 <P>You may not use user <CODE>root</CODE>, as that would expose
2739 the system to unacceptable security risks. The scheduler will
2740 automatically choose user <CODE>nobody</CODE> if you specify a
2741 user whose ID is 0.</P>
2742
2743 </BLOCKQUOTE>
2744
2745
2746 <H2 CLASS="title"><SPAN CLASS="INFO">CUPS 1.5</SPAN><A NAME="WebInterface">WebInterface</A></H2>
2747
2748 <H3>Examples</H3>
2749
2750 <PRE CLASS="command">
2751 WebInterface yes
2752 WebInterface no
2753 </PRE>
2754
2755 <H3>Description</H3>
2756
2757 <P>The <CODE>WebInterface</CODE> directive specifies whether the web interface is enabled. The default value is <CODE>@CUPS_WEBIF@</CODE>.</P>
2758
2759 </BODY>
2760 </HTML>