]> git.ipfire.org Git - people/ms/u-boot.git/blob - drivers/fpga/altera.c
ARM: tegra: set initrd_high so boot scripts work
[people/ms/u-boot.git] / drivers / fpga / altera.c
1 /*
2 * (C) Copyright 2003
3 * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
4 *
5 * (C) Copyright 2002
6 * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 /*
12 * Altera FPGA support
13 */
14 #include <common.h>
15 #include <ACEX1K.h>
16 #include <stratixII.h>
17
18 /* Define FPGA_DEBUG to get debug printf's */
19 /* #define FPGA_DEBUG */
20
21 #ifdef FPGA_DEBUG
22 #define PRINTF(fmt,args...) printf (fmt ,##args)
23 #else
24 #define PRINTF(fmt,args...)
25 #endif
26
27 /* Local Static Functions */
28 static int altera_validate (Altera_desc * desc, const char *fn);
29
30 /* ------------------------------------------------------------------------- */
31 int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
32 {
33 int ret_val = FPGA_FAIL; /* assume a failure */
34
35 if (!altera_validate (desc, (char *)__FUNCTION__)) {
36 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
37 } else {
38 switch (desc->family) {
39 case Altera_ACEX1K:
40 case Altera_CYC2:
41 #if defined(CONFIG_FPGA_ACEX1K)
42 PRINTF ("%s: Launching the ACEX1K Loader...\n",
43 __FUNCTION__);
44 ret_val = ACEX1K_load (desc, buf, bsize);
45 #elif defined(CONFIG_FPGA_CYCLON2)
46 PRINTF ("%s: Launching the CYCLONE II Loader...\n",
47 __FUNCTION__);
48 ret_val = CYC2_load (desc, buf, bsize);
49 #else
50 printf ("%s: No support for ACEX1K devices.\n",
51 __FUNCTION__);
52 #endif
53 break;
54
55 #if defined(CONFIG_FPGA_STRATIX_II)
56 case Altera_StratixII:
57 PRINTF ("%s: Launching the Stratix II Loader...\n",
58 __FUNCTION__);
59 ret_val = StratixII_load (desc, buf, bsize);
60 break;
61 #endif
62 default:
63 printf ("%s: Unsupported family type, %d\n",
64 __FUNCTION__, desc->family);
65 }
66 }
67
68 return ret_val;
69 }
70
71 int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
72 {
73 int ret_val = FPGA_FAIL; /* assume a failure */
74
75 if (!altera_validate (desc, (char *)__FUNCTION__)) {
76 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
77 } else {
78 switch (desc->family) {
79 case Altera_ACEX1K:
80 #if defined(CONFIG_FPGA_ACEX)
81 PRINTF ("%s: Launching the ACEX1K Reader...\n",
82 __FUNCTION__);
83 ret_val = ACEX1K_dump (desc, buf, bsize);
84 #else
85 printf ("%s: No support for ACEX1K devices.\n",
86 __FUNCTION__);
87 #endif
88 break;
89
90 #if defined(CONFIG_FPGA_STRATIX_II)
91 case Altera_StratixII:
92 PRINTF ("%s: Launching the Stratix II Reader...\n",
93 __FUNCTION__);
94 ret_val = StratixII_dump (desc, buf, bsize);
95 break;
96 #endif
97 default:
98 printf ("%s: Unsupported family type, %d\n",
99 __FUNCTION__, desc->family);
100 }
101 }
102
103 return ret_val;
104 }
105
106 int altera_info( Altera_desc *desc )
107 {
108 int ret_val = FPGA_FAIL;
109
110 if (altera_validate (desc, (char *)__FUNCTION__)) {
111 printf ("Family: \t");
112 switch (desc->family) {
113 case Altera_ACEX1K:
114 printf ("ACEX1K\n");
115 break;
116 case Altera_CYC2:
117 printf ("CYCLON II\n");
118 break;
119 case Altera_StratixII:
120 printf ("Stratix II\n");
121 break;
122 /* Add new family types here */
123 default:
124 printf ("Unknown family type, %d\n", desc->family);
125 }
126
127 printf ("Interface type:\t");
128 switch (desc->iface) {
129 case passive_serial:
130 printf ("Passive Serial (PS)\n");
131 break;
132 case passive_parallel_synchronous:
133 printf ("Passive Parallel Synchronous (PPS)\n");
134 break;
135 case passive_parallel_asynchronous:
136 printf ("Passive Parallel Asynchronous (PPA)\n");
137 break;
138 case passive_serial_asynchronous:
139 printf ("Passive Serial Asynchronous (PSA)\n");
140 break;
141 case altera_jtag_mode: /* Not used */
142 printf ("JTAG Mode\n");
143 break;
144 case fast_passive_parallel:
145 printf ("Fast Passive Parallel (FPP)\n");
146 break;
147 case fast_passive_parallel_security:
148 printf
149 ("Fast Passive Parallel with Security (FPPS) \n");
150 break;
151 /* Add new interface types here */
152 default:
153 printf ("Unsupported interface type, %d\n", desc->iface);
154 }
155
156 printf ("Device Size: \t%d bytes\n"
157 "Cookie: \t0x%x (%d)\n",
158 desc->size, desc->cookie, desc->cookie);
159
160 if (desc->iface_fns) {
161 printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
162 switch (desc->family) {
163 case Altera_ACEX1K:
164 case Altera_CYC2:
165 #if defined(CONFIG_FPGA_ACEX1K)
166 ACEX1K_info (desc);
167 #elif defined(CONFIG_FPGA_CYCLON2)
168 CYC2_info (desc);
169 #else
170 /* just in case */
171 printf ("%s: No support for ACEX1K devices.\n",
172 __FUNCTION__);
173 #endif
174 break;
175 #if defined(CONFIG_FPGA_STRATIX_II)
176 case Altera_StratixII:
177 StratixII_info (desc);
178 break;
179 #endif
180 /* Add new family types here */
181 default:
182 /* we don't need a message here - we give one up above */
183 break;
184 }
185 } else {
186 printf ("No Device Function Table.\n");
187 }
188
189 ret_val = FPGA_SUCCESS;
190 } else {
191 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
192 }
193
194 return ret_val;
195 }
196
197 /* ------------------------------------------------------------------------- */
198
199 static int altera_validate (Altera_desc * desc, const char *fn)
200 {
201 int ret_val = false;
202
203 if (desc) {
204 if ((desc->family > min_altera_type) &&
205 (desc->family < max_altera_type)) {
206 if ((desc->iface > min_altera_iface_type) &&
207 (desc->iface < max_altera_iface_type)) {
208 if (desc->size) {
209 ret_val = true;
210 } else {
211 printf ("%s: NULL part size\n", fn);
212 }
213 } else {
214 printf ("%s: Invalid Interface type, %d\n",
215 fn, desc->iface);
216 }
217 } else {
218 printf ("%s: Invalid family type, %d\n", fn, desc->family);
219 }
220 } else {
221 printf ("%s: NULL descriptor!\n", fn);
222 }
223
224 return ret_val;
225 }
226
227 /* ------------------------------------------------------------------------- */