1 // SPDX-License-Identifier: MIT
3 * Copyright © 2014 Intel Corporation
7 * DOC: Logical Rings, Logical Ring Contexts and Execlists
10 * GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts".
11 * These expanded contexts enable a number of new abilities, especially
12 * "Execlists" (also implemented in this file).
14 * One of the main differences with the legacy HW contexts is that logical
15 * ring contexts incorporate many more things to the context's state, like
16 * PDPs or ringbuffer control registers:
18 * The reason why PDPs are included in the context is straightforward: as
19 * PPGTTs (per-process GTTs) are actually per-context, having the PDPs
20 * contained there mean you don't need to do a ppgtt->switch_mm yourself,
21 * instead, the GPU will do it for you on the context switch.
23 * But, what about the ringbuffer control registers (head, tail, etc..)?
24 * shouldn't we just need a set of those per engine command streamer? This is
25 * where the name "Logical Rings" starts to make sense: by virtualizing the
26 * rings, the engine cs shifts to a new "ring buffer" with every context
27 * switch. When you want to submit a workload to the GPU you: A) choose your
28 * context, B) find its appropriate virtualized ring, C) write commands to it
29 * and then, finally, D) tell the GPU to switch to that context.
31 * Instead of the legacy MI_SET_CONTEXT, the way you tell the GPU to switch
32 * to a contexts is via a context execution list, ergo "Execlists".
35 * Regarding the creation of contexts, we have:
37 * - One global default context.
38 * - One local default context for each opened fd.
39 * - One local extra context for each context create ioctl call.
41 * Now that ringbuffers belong per-context (and not per-engine, like before)
42 * and that contexts are uniquely tied to a given engine (and not reusable,
43 * like before) we need:
45 * - One ringbuffer per-engine inside each context.
46 * - One backing object per-engine inside each context.
48 * The global default context starts its life with these new objects fully
49 * allocated and populated. The local default context for each opened fd is
50 * more complex, because we don't know at creation time which engine is going
51 * to use them. To handle this, we have implemented a deferred creation of LR
54 * The local context starts its life as a hollow or blank holder, that only
55 * gets populated for a given engine once we receive an execbuffer. If later
56 * on we receive another execbuffer ioctl for the same context but a different
57 * engine, we allocate/populate a new ringbuffer and context backing object and
60 * Finally, regarding local contexts created using the ioctl call: as they are
61 * only allowed with the render ring, we can allocate & populate them right
62 * away (no need to defer anything, at least for now).
64 * Execlists implementation:
65 * Execlists are the new method by which, on gen8+ hardware, workloads are
66 * submitted for execution (as opposed to the legacy, ringbuffer-based, method).
67 * This method works as follows:
69 * When a request is committed, its commands (the BB start and any leading or
70 * trailing commands, like the seqno breadcrumbs) are placed in the ringbuffer
71 * for the appropriate context. The tail pointer in the hardware context is not
72 * updated at this time, but instead, kept by the driver in the ringbuffer
73 * structure. A structure representing this request is added to a request queue
74 * for the appropriate engine: this structure contains a copy of the context's
75 * tail after the request was written to the ring buffer and a pointer to the
78 * If the engine's request queue was empty before the request was added, the
79 * queue is processed immediately. Otherwise the queue will be processed during
80 * a context switch interrupt. In any case, elements on the queue will get sent
81 * (in pairs) to the GPU's ExecLists Submit Port (ELSP, for short) with a
82 * globally unique 20-bits submission ID.
84 * When execution of a request completes, the GPU updates the context status
85 * buffer with a context complete event and generates a context switch interrupt.
86 * During the interrupt handling, the driver examines the events in the buffer:
87 * for each context complete event, if the announced ID matches that on the head
88 * of the request queue, then that request is retired and removed from the queue.
90 * After processing, if any requests were retired and the queue is not empty
91 * then a new execution list can be submitted. The two requests at the front of
92 * the queue are next to be submitted but since a context may not occur twice in
93 * an execution list, if subsequent requests have the same ID as the first then
94 * the two requests must be combined. This is done simply by discarding requests
95 * at the head of the queue until either only one requests is left (in which case
96 * we use a NULL second context) or the first two requests have unique IDs.
98 * By always executing the first two requests in the queue the driver ensures
99 * that the GPU is kept as busy as possible. In the case where a single context
100 * completes but a second context is still executing, the request for this second
101 * context will be at the head of the queue when we remove the first one. This
102 * request will then be resubmitted along with a new request for a different context,
103 * which will cause the hardware to continue executing the second request and queue
104 * the new request (the GPU detects the condition of a context getting preempted
105 * with the same context and optimizes the context switch flow by not doing
106 * preemption, but just sampling the new tail pointer).
109 #include <linux/interrupt.h>
110 #include <linux/string_helpers.h>
112 #include "i915_drv.h"
113 #include "i915_trace.h"
114 #include "i915_vgpu.h"
115 #include "gen8_engine_cs.h"
116 #include "intel_breadcrumbs.h"
117 #include "intel_context.h"
118 #include "intel_engine_heartbeat.h"
119 #include "intel_engine_pm.h"
120 #include "intel_engine_regs.h"
121 #include "intel_engine_stats.h"
122 #include "intel_execlists_submission.h"
123 #include "intel_gt.h"
124 #include "intel_gt_irq.h"
125 #include "intel_gt_pm.h"
126 #include "intel_gt_regs.h"
127 #include "intel_gt_requests.h"
128 #include "intel_lrc.h"
129 #include "intel_lrc_reg.h"
130 #include "intel_mocs.h"
131 #include "intel_reset.h"
132 #include "intel_ring.h"
133 #include "intel_workarounds.h"
134 #include "shmem_utils.h"
136 #define RING_EXECLIST_QFULL (1 << 0x2)
137 #define RING_EXECLIST1_VALID (1 << 0x3)
138 #define RING_EXECLIST0_VALID (1 << 0x4)
139 #define RING_EXECLIST_ACTIVE_STATUS (3 << 0xE)
140 #define RING_EXECLIST1_ACTIVE (1 << 0x11)
141 #define RING_EXECLIST0_ACTIVE (1 << 0x12)
143 #define GEN8_CTX_STATUS_IDLE_ACTIVE (1 << 0)
144 #define GEN8_CTX_STATUS_PREEMPTED (1 << 1)
145 #define GEN8_CTX_STATUS_ELEMENT_SWITCH (1 << 2)
146 #define GEN8_CTX_STATUS_ACTIVE_IDLE (1 << 3)
147 #define GEN8_CTX_STATUS_COMPLETE (1 << 4)
148 #define GEN8_CTX_STATUS_LITE_RESTORE (1 << 15)
150 #define GEN8_CTX_STATUS_COMPLETED_MASK \
151 (GEN8_CTX_STATUS_COMPLETE | GEN8_CTX_STATUS_PREEMPTED)
153 #define GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE (0x1) /* lower csb dword */
154 #define GEN12_CTX_SWITCH_DETAIL(csb_dw) ((csb_dw) & 0xF) /* upper csb dword */
155 #define GEN12_CSB_SW_CTX_ID_MASK GENMASK(25, 15)
156 #define GEN12_IDLE_CTX_ID 0x7FF
157 #define GEN12_CSB_CTX_VALID(csb_dw) \
158 (FIELD_GET(GEN12_CSB_SW_CTX_ID_MASK, csb_dw) != GEN12_IDLE_CTX_ID)
160 #define XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE BIT(1) /* upper csb dword */
161 #define XEHP_CSB_SW_CTX_ID_MASK GENMASK(31, 10)
162 #define XEHP_IDLE_CTX_ID 0xFFFF
163 #define XEHP_CSB_CTX_VALID(csb_dw) \
164 (FIELD_GET(XEHP_CSB_SW_CTX_ID_MASK, csb_dw) != XEHP_IDLE_CTX_ID)
166 /* Typical size of the average request (2 pipecontrols and a MI_BB) */
167 #define EXECLISTS_REQUEST_SIZE 64 /* bytes */
169 struct virtual_engine
{
170 struct intel_engine_cs base
;
171 struct intel_context context
;
175 * We allow only a single request through the virtual engine at a time
176 * (each request in the timeline waits for the completion fence of
177 * the previous before being submitted). By restricting ourselves to
178 * only submitting a single request, each request is placed on to a
179 * physical to maximise load spreading (by virtue of the late greedy
180 * scheduling -- each real engine takes the next available request
183 struct i915_request
*request
;
186 * We keep a rbtree of available virtual engines inside each physical
187 * engine, sorted by priority. Here we preallocate the nodes we need
188 * for the virtual engine, indexed by physical_engine->id.
193 } nodes
[I915_NUM_ENGINES
];
195 /* And finally, which physical engines this virtual engine maps onto. */
196 unsigned int num_siblings
;
197 struct intel_engine_cs
*siblings
[];
200 static struct virtual_engine
*to_virtual_engine(struct intel_engine_cs
*engine
)
202 GEM_BUG_ON(!intel_engine_is_virtual(engine
));
203 return container_of(engine
, struct virtual_engine
, base
);
206 static struct intel_context
*
207 execlists_create_virtual(struct intel_engine_cs
**siblings
, unsigned int count
,
208 unsigned long flags
);
210 static struct i915_request
*
211 __active_request(const struct intel_timeline
* const tl
,
212 struct i915_request
*rq
,
215 struct i915_request
*active
= rq
;
217 list_for_each_entry_from_reverse(rq
, &tl
->requests
, link
) {
218 if (__i915_request_is_complete(rq
))
222 i915_request_set_error_once(rq
, error
);
223 __i915_request_skip(rq
);
231 static struct i915_request
*
232 active_request(const struct intel_timeline
* const tl
, struct i915_request
*rq
)
234 return __active_request(tl
, rq
, 0);
237 static void ring_set_paused(const struct intel_engine_cs
*engine
, int state
)
240 * We inspect HWS_PREEMPT with a semaphore inside
241 * engine->emit_fini_breadcrumb. If the dword is true,
242 * the ring is paused as the semaphore will busywait
243 * until the dword is false.
245 engine
->status_page
.addr
[I915_GEM_HWS_PREEMPT
] = state
;
250 static struct i915_priolist
*to_priolist(struct rb_node
*rb
)
252 return rb_entry(rb
, struct i915_priolist
, node
);
255 static int rq_prio(const struct i915_request
*rq
)
257 return READ_ONCE(rq
->sched
.attr
.priority
);
260 static int effective_prio(const struct i915_request
*rq
)
262 int prio
= rq_prio(rq
);
265 * If this request is special and must not be interrupted at any
266 * cost, so be it. Note we are only checking the most recent request
267 * in the context and so may be masking an earlier vip request. It
268 * is hoped that under the conditions where nopreempt is used, this
269 * will not matter (i.e. all requests to that context will be
270 * nopreempt for as long as desired).
272 if (i915_request_has_nopreempt(rq
))
273 prio
= I915_PRIORITY_UNPREEMPTABLE
;
278 static int queue_prio(const struct i915_sched_engine
*sched_engine
)
282 rb
= rb_first_cached(&sched_engine
->queue
);
286 return to_priolist(rb
)->priority
;
289 static int virtual_prio(const struct intel_engine_execlists
*el
)
291 struct rb_node
*rb
= rb_first_cached(&el
->virtual);
293 return rb
? rb_entry(rb
, struct ve_node
, rb
)->prio
: INT_MIN
;
296 static bool need_preempt(const struct intel_engine_cs
*engine
,
297 const struct i915_request
*rq
)
301 if (!intel_engine_has_semaphores(engine
))
305 * Check if the current priority hint merits a preemption attempt.
307 * We record the highest value priority we saw during rescheduling
308 * prior to this dequeue, therefore we know that if it is strictly
309 * less than the current tail of ESLP[0], we do not need to force
310 * a preempt-to-idle cycle.
312 * However, the priority hint is a mere hint that we may need to
313 * preempt. If that hint is stale or we may be trying to preempt
314 * ourselves, ignore the request.
316 * More naturally we would write
317 * prio >= max(0, last);
318 * except that we wish to prevent triggering preemption at the same
319 * priority level: the task that is running should remain running
320 * to preserve FIFO ordering of dependencies.
322 last_prio
= max(effective_prio(rq
), I915_PRIORITY_NORMAL
- 1);
323 if (engine
->sched_engine
->queue_priority_hint
<= last_prio
)
327 * Check against the first request in ELSP[1], it will, thanks to the
328 * power of PI, be the highest priority of that context.
330 if (!list_is_last(&rq
->sched
.link
, &engine
->sched_engine
->requests
) &&
331 rq_prio(list_next_entry(rq
, sched
.link
)) > last_prio
)
335 * If the inflight context did not trigger the preemption, then maybe
336 * it was the set of queued requests? Pick the highest priority in
337 * the queue (the first active priolist) and see if it deserves to be
338 * running instead of ELSP[0].
340 * The highest priority request in the queue can not be either
341 * ELSP[0] or ELSP[1] as, thanks again to PI, if it was the same
342 * context, it's priority would not exceed ELSP[0] aka last_prio.
344 return max(virtual_prio(&engine
->execlists
),
345 queue_prio(engine
->sched_engine
)) > last_prio
;
348 __maybe_unused
static bool
349 assert_priority_queue(const struct i915_request
*prev
,
350 const struct i915_request
*next
)
353 * Without preemption, the prev may refer to the still active element
354 * which we refuse to let go.
356 * Even with preemption, there are times when we think it is better not
357 * to preempt and leave an ostensibly lower priority request in flight.
359 if (i915_request_is_active(prev
))
362 return rq_prio(prev
) >= rq_prio(next
);
365 static struct i915_request
*
366 __unwind_incomplete_requests(struct intel_engine_cs
*engine
)
368 struct i915_request
*rq
, *rn
, *active
= NULL
;
369 struct list_head
*pl
;
370 int prio
= I915_PRIORITY_INVALID
;
372 lockdep_assert_held(&engine
->sched_engine
->lock
);
374 list_for_each_entry_safe_reverse(rq
, rn
,
375 &engine
->sched_engine
->requests
,
377 if (__i915_request_is_complete(rq
)) {
378 list_del_init(&rq
->sched
.link
);
382 __i915_request_unsubmit(rq
);
384 GEM_BUG_ON(rq_prio(rq
) == I915_PRIORITY_INVALID
);
385 if (rq_prio(rq
) != prio
) {
387 pl
= i915_sched_lookup_priolist(engine
->sched_engine
,
390 GEM_BUG_ON(i915_sched_engine_is_empty(engine
->sched_engine
));
392 list_move(&rq
->sched
.link
, pl
);
393 set_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
395 /* Check in case we rollback so far we wrap [size/2] */
396 if (intel_ring_direction(rq
->ring
,
398 rq
->ring
->tail
+ 8) > 0)
399 rq
->context
->lrc
.desc
|= CTX_DESC_FORCE_RESTORE
;
407 struct i915_request
*
408 execlists_unwind_incomplete_requests(struct intel_engine_execlists
*execlists
)
410 struct intel_engine_cs
*engine
=
411 container_of(execlists
, typeof(*engine
), execlists
);
413 return __unwind_incomplete_requests(engine
);
417 execlists_context_status_change(struct i915_request
*rq
, unsigned long status
)
420 * Only used when GVT-g is enabled now. When GVT-g is disabled,
421 * The compiler should eliminate this function as dead-code.
423 if (!IS_ENABLED(CONFIG_DRM_I915_GVT
))
426 atomic_notifier_call_chain(&rq
->engine
->context_status_notifier
,
430 static void reset_active(struct i915_request
*rq
,
431 struct intel_engine_cs
*engine
)
433 struct intel_context
* const ce
= rq
->context
;
437 * The executing context has been cancelled. We want to prevent
438 * further execution along this context and propagate the error on
439 * to anything depending on its results.
441 * In __i915_request_submit(), we apply the -EIO and remove the
442 * requests' payloads for any banned requests. But first, we must
443 * rewind the context back to the start of the incomplete request so
444 * that we do not jump back into the middle of the batch.
446 * We preserve the breadcrumbs and semaphores of the incomplete
447 * requests so that inter-timeline dependencies (i.e other timelines)
448 * remain correctly ordered. And we defer to __i915_request_submit()
449 * so that all asynchronous waits are correctly handled.
451 ENGINE_TRACE(engine
, "{ reset rq=%llx:%lld }\n",
452 rq
->fence
.context
, rq
->fence
.seqno
);
454 /* On resubmission of the active request, payload will be scrubbed */
455 if (__i915_request_is_complete(rq
))
458 head
= __active_request(ce
->timeline
, rq
, -EIO
)->head
;
459 head
= intel_ring_wrap(ce
->ring
, head
);
461 /* Scrub the context image to prevent replaying the previous batch */
462 lrc_init_regs(ce
, engine
, true);
464 /* We've switched away, so this should be a no-op, but intent matters */
465 ce
->lrc
.lrca
= lrc_update_regs(ce
, engine
, head
);
468 static bool bad_request(const struct i915_request
*rq
)
470 return rq
->fence
.error
&& i915_request_started(rq
);
473 static struct intel_engine_cs
*
474 __execlists_schedule_in(struct i915_request
*rq
)
476 struct intel_engine_cs
* const engine
= rq
->engine
;
477 struct intel_context
* const ce
= rq
->context
;
479 intel_context_get(ce
);
481 if (unlikely(intel_context_is_closed(ce
) &&
482 !intel_engine_has_heartbeat(engine
)))
483 intel_context_set_exiting(ce
);
485 if (unlikely(!intel_context_is_schedulable(ce
) || bad_request(rq
)))
486 reset_active(rq
, engine
);
488 if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM
))
489 lrc_check_regs(ce
, engine
, "before");
492 /* Use a fixed tag for OA and friends */
493 GEM_BUG_ON(ce
->tag
<= BITS_PER_LONG
);
494 ce
->lrc
.ccid
= ce
->tag
;
495 } else if (GRAPHICS_VER_FULL(engine
->i915
) >= IP_VER(12, 50)) {
496 /* We don't need a strict matching tag, just different values */
497 unsigned int tag
= ffs(READ_ONCE(engine
->context_tag
));
499 GEM_BUG_ON(tag
== 0 || tag
>= BITS_PER_LONG
);
500 clear_bit(tag
- 1, &engine
->context_tag
);
501 ce
->lrc
.ccid
= tag
<< (XEHP_SW_CTX_ID_SHIFT
- 32);
503 BUILD_BUG_ON(BITS_PER_LONG
> GEN12_MAX_CONTEXT_HW_ID
);
506 /* We don't need a strict matching tag, just different values */
507 unsigned int tag
= __ffs(engine
->context_tag
);
509 GEM_BUG_ON(tag
>= BITS_PER_LONG
);
510 __clear_bit(tag
, &engine
->context_tag
);
511 ce
->lrc
.ccid
= (1 + tag
) << (GEN11_SW_CTX_ID_SHIFT
- 32);
513 BUILD_BUG_ON(BITS_PER_LONG
> GEN12_MAX_CONTEXT_HW_ID
);
516 ce
->lrc
.ccid
|= engine
->execlists
.ccid
;
518 __intel_gt_pm_get(engine
->gt
);
519 if (engine
->fw_domain
&& !engine
->fw_active
++)
520 intel_uncore_forcewake_get(engine
->uncore
, engine
->fw_domain
);
521 execlists_context_status_change(rq
, INTEL_CONTEXT_SCHEDULE_IN
);
522 intel_engine_context_in(engine
);
524 CE_TRACE(ce
, "schedule-in, ccid:%x\n", ce
->lrc
.ccid
);
529 static void execlists_schedule_in(struct i915_request
*rq
, int idx
)
531 struct intel_context
* const ce
= rq
->context
;
532 struct intel_engine_cs
*old
;
534 GEM_BUG_ON(!intel_engine_pm_is_awake(rq
->engine
));
535 trace_i915_request_in(rq
, idx
);
539 old
= __execlists_schedule_in(rq
);
540 WRITE_ONCE(ce
->inflight
, ptr_inc(old
));
542 GEM_BUG_ON(intel_context_inflight(ce
) != rq
->engine
);
546 resubmit_virtual_request(struct i915_request
*rq
, struct virtual_engine
*ve
)
548 struct intel_engine_cs
*engine
= rq
->engine
;
550 spin_lock_irq(&engine
->sched_engine
->lock
);
552 clear_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
553 WRITE_ONCE(rq
->engine
, &ve
->base
);
554 ve
->base
.submit_request(rq
);
556 spin_unlock_irq(&engine
->sched_engine
->lock
);
559 static void kick_siblings(struct i915_request
*rq
, struct intel_context
*ce
)
561 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
562 struct intel_engine_cs
*engine
= rq
->engine
;
565 * After this point, the rq may be transferred to a new sibling, so
566 * before we clear ce->inflight make sure that the context has been
567 * removed from the b->signalers and furthermore we need to make sure
568 * that the concurrent iterator in signal_irq_work is no longer
569 * following ce->signal_link.
571 if (!list_empty(&ce
->signals
))
572 intel_context_remove_breadcrumbs(ce
, engine
->breadcrumbs
);
575 * This engine is now too busy to run this virtual request, so
576 * see if we can find an alternative engine for it to execute on.
577 * Once a request has become bonded to this engine, we treat it the
578 * same as other native request.
580 if (i915_request_in_priority_queue(rq
) &&
581 rq
->execution_mask
!= engine
->mask
)
582 resubmit_virtual_request(rq
, ve
);
584 if (READ_ONCE(ve
->request
))
585 tasklet_hi_schedule(&ve
->base
.sched_engine
->tasklet
);
588 static void __execlists_schedule_out(struct i915_request
* const rq
,
589 struct intel_context
* const ce
)
591 struct intel_engine_cs
* const engine
= rq
->engine
;
595 * NB process_csb() is not under the engine->sched_engine->lock and hence
596 * schedule_out can race with schedule_in meaning that we should
597 * refrain from doing non-trivial work here.
600 CE_TRACE(ce
, "schedule-out, ccid:%x\n", ce
->lrc
.ccid
);
601 GEM_BUG_ON(ce
->inflight
!= engine
);
603 if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM
))
604 lrc_check_regs(ce
, engine
, "after");
607 * If we have just completed this context, the engine may now be
608 * idle and we want to re-enter powersaving.
610 if (intel_timeline_is_last(ce
->timeline
, rq
) &&
611 __i915_request_is_complete(rq
))
612 intel_engine_add_retire(engine
, ce
->timeline
);
615 if (GRAPHICS_VER_FULL(engine
->i915
) >= IP_VER(12, 50)) {
616 ccid
>>= XEHP_SW_CTX_ID_SHIFT
- 32;
617 ccid
&= XEHP_MAX_CONTEXT_HW_ID
;
619 ccid
>>= GEN11_SW_CTX_ID_SHIFT
- 32;
620 ccid
&= GEN12_MAX_CONTEXT_HW_ID
;
623 if (ccid
< BITS_PER_LONG
) {
624 GEM_BUG_ON(ccid
== 0);
625 GEM_BUG_ON(test_bit(ccid
- 1, &engine
->context_tag
));
626 __set_bit(ccid
- 1, &engine
->context_tag
);
628 intel_engine_context_out(engine
);
629 execlists_context_status_change(rq
, INTEL_CONTEXT_SCHEDULE_OUT
);
630 if (engine
->fw_domain
&& !--engine
->fw_active
)
631 intel_uncore_forcewake_put(engine
->uncore
, engine
->fw_domain
);
632 intel_gt_pm_put_async(engine
->gt
);
635 * If this is part of a virtual engine, its next request may
636 * have been blocked waiting for access to the active context.
637 * We have to kick all the siblings again in case we need to
638 * switch (e.g. the next request is not runnable on this
639 * engine). Hopefully, we will already have submitted the next
640 * request before the tasklet runs and do not need to rebuild
641 * each virtual tree and kick everyone again.
643 if (ce
->engine
!= engine
)
644 kick_siblings(rq
, ce
);
646 WRITE_ONCE(ce
->inflight
, NULL
);
647 intel_context_put(ce
);
650 static inline void execlists_schedule_out(struct i915_request
*rq
)
652 struct intel_context
* const ce
= rq
->context
;
654 trace_i915_request_out(rq
);
656 GEM_BUG_ON(!ce
->inflight
);
657 ce
->inflight
= ptr_dec(ce
->inflight
);
658 if (!__intel_context_inflight_count(ce
->inflight
))
659 __execlists_schedule_out(rq
, ce
);
661 i915_request_put(rq
);
664 static u32
map_i915_prio_to_lrc_desc_prio(int prio
)
666 if (prio
> I915_PRIORITY_NORMAL
)
667 return GEN12_CTX_PRIORITY_HIGH
;
668 else if (prio
< I915_PRIORITY_NORMAL
)
669 return GEN12_CTX_PRIORITY_LOW
;
671 return GEN12_CTX_PRIORITY_NORMAL
;
674 static u64
execlists_update_context(struct i915_request
*rq
)
676 struct intel_context
*ce
= rq
->context
;
681 if (rq
->engine
->flags
& I915_ENGINE_HAS_EU_PRIORITY
)
682 desc
|= map_i915_prio_to_lrc_desc_prio(rq_prio(rq
));
685 * WaIdleLiteRestore:bdw,skl
687 * We should never submit the context with the same RING_TAIL twice
688 * just in case we submit an empty ring, which confuses the HW.
690 * We append a couple of NOOPs (gen8_emit_wa_tail) after the end of
691 * the normal request to be able to always advance the RING_TAIL on
692 * subsequent resubmissions (for lite restore). Should that fail us,
693 * and we try and submit the same tail again, force the context
696 * If we need to return to a preempted context, we need to skip the
697 * lite-restore and force it to reload the RING_TAIL. Otherwise, the
698 * HW has a tendency to ignore us rewinding the TAIL to the end of
699 * an earlier request.
701 GEM_BUG_ON(ce
->lrc_reg_state
[CTX_RING_TAIL
] != rq
->ring
->tail
);
702 prev
= rq
->ring
->tail
;
703 tail
= intel_ring_set_tail(rq
->ring
, rq
->tail
);
704 if (unlikely(intel_ring_direction(rq
->ring
, tail
, prev
) <= 0))
705 desc
|= CTX_DESC_FORCE_RESTORE
;
706 ce
->lrc_reg_state
[CTX_RING_TAIL
] = tail
;
707 rq
->tail
= rq
->wa_tail
;
710 * Make sure the context image is complete before we submit it to HW.
712 * Ostensibly, writes (including the WCB) should be flushed prior to
713 * an uncached write such as our mmio register access, the empirical
714 * evidence (esp. on Braswell) suggests that the WC write into memory
715 * may not be visible to the HW prior to the completion of the UC
716 * register write and that we may begin execution from the context
717 * before its image is complete leading to invalid PD chasing.
721 ce
->lrc
.desc
&= ~CTX_DESC_FORCE_RESTORE
;
725 static void write_desc(struct intel_engine_execlists
*execlists
, u64 desc
, u32 port
)
727 if (execlists
->ctrl_reg
) {
728 writel(lower_32_bits(desc
), execlists
->submit_reg
+ port
* 2);
729 writel(upper_32_bits(desc
), execlists
->submit_reg
+ port
* 2 + 1);
731 writel(upper_32_bits(desc
), execlists
->submit_reg
);
732 writel(lower_32_bits(desc
), execlists
->submit_reg
);
736 static __maybe_unused
char *
737 dump_port(char *buf
, int buflen
, const char *prefix
, struct i915_request
*rq
)
742 snprintf(buf
, buflen
, "%sccid:%x %llx:%lld%s prio %d",
744 rq
->context
->lrc
.ccid
,
745 rq
->fence
.context
, rq
->fence
.seqno
,
746 __i915_request_is_complete(rq
) ? "!" :
747 __i915_request_has_started(rq
) ? "*" :
754 static __maybe_unused noinline
void
755 trace_ports(const struct intel_engine_execlists
*execlists
,
757 struct i915_request
* const *ports
)
759 const struct intel_engine_cs
*engine
=
760 container_of(execlists
, typeof(*engine
), execlists
);
761 char __maybe_unused p0
[40], p1
[40];
766 ENGINE_TRACE(engine
, "%s { %s%s }\n", msg
,
767 dump_port(p0
, sizeof(p0
), "", ports
[0]),
768 dump_port(p1
, sizeof(p1
), ", ", ports
[1]));
772 reset_in_progress(const struct intel_engine_cs
*engine
)
774 return unlikely(!__tasklet_is_enabled(&engine
->sched_engine
->tasklet
));
777 static __maybe_unused noinline
bool
778 assert_pending_valid(const struct intel_engine_execlists
*execlists
,
781 struct intel_engine_cs
*engine
=
782 container_of(execlists
, typeof(*engine
), execlists
);
783 struct i915_request
* const *port
, *rq
, *prev
= NULL
;
784 struct intel_context
*ce
= NULL
;
787 trace_ports(execlists
, msg
, execlists
->pending
);
789 /* We may be messing around with the lists during reset, lalala */
790 if (reset_in_progress(engine
))
793 if (!execlists
->pending
[0]) {
794 GEM_TRACE_ERR("%s: Nothing pending for promotion!\n",
799 if (execlists
->pending
[execlists_num_ports(execlists
)]) {
800 GEM_TRACE_ERR("%s: Excess pending[%d] for promotion!\n",
801 engine
->name
, execlists_num_ports(execlists
));
805 for (port
= execlists
->pending
; (rq
= *port
); port
++) {
809 GEM_BUG_ON(!kref_read(&rq
->fence
.refcount
));
810 GEM_BUG_ON(!i915_request_is_active(rq
));
812 if (ce
== rq
->context
) {
813 GEM_TRACE_ERR("%s: Dup context:%llx in pending[%zd]\n",
815 ce
->timeline
->fence_context
,
816 port
- execlists
->pending
);
821 if (ccid
== ce
->lrc
.ccid
) {
822 GEM_TRACE_ERR("%s: Dup ccid:%x context:%llx in pending[%zd]\n",
824 ccid
, ce
->timeline
->fence_context
,
825 port
- execlists
->pending
);
831 * Sentinels are supposed to be the last request so they flush
832 * the current execution off the HW. Check that they are the only
833 * request in the pending submission.
835 * NB: Due to the async nature of preempt-to-busy and request
836 * cancellation we need to handle the case where request
837 * becomes a sentinel in parallel to CSB processing.
839 if (prev
&& i915_request_has_sentinel(prev
) &&
840 !READ_ONCE(prev
->fence
.error
)) {
841 GEM_TRACE_ERR("%s: context:%llx after sentinel in pending[%zd]\n",
843 ce
->timeline
->fence_context
,
844 port
- execlists
->pending
);
850 * We want virtual requests to only be in the first slot so
851 * that they are never stuck behind a hog and can be immediately
852 * transferred onto the next idle engine.
854 if (rq
->execution_mask
!= engine
->mask
&&
855 port
!= execlists
->pending
) {
856 GEM_TRACE_ERR("%s: virtual engine:%llx not in prime position[%zd]\n",
858 ce
->timeline
->fence_context
,
859 port
- execlists
->pending
);
863 /* Hold tightly onto the lock to prevent concurrent retires! */
864 if (!spin_trylock_irqsave(&rq
->lock
, flags
))
867 if (__i915_request_is_complete(rq
))
870 if (i915_active_is_idle(&ce
->active
) &&
871 !intel_context_is_barrier(ce
)) {
872 GEM_TRACE_ERR("%s: Inactive context:%llx in pending[%zd]\n",
874 ce
->timeline
->fence_context
,
875 port
- execlists
->pending
);
880 if (!i915_vma_is_pinned(ce
->state
)) {
881 GEM_TRACE_ERR("%s: Unpinned context:%llx in pending[%zd]\n",
883 ce
->timeline
->fence_context
,
884 port
- execlists
->pending
);
889 if (!i915_vma_is_pinned(ce
->ring
->vma
)) {
890 GEM_TRACE_ERR("%s: Unpinned ring:%llx in pending[%zd]\n",
892 ce
->timeline
->fence_context
,
893 port
- execlists
->pending
);
899 spin_unlock_irqrestore(&rq
->lock
, flags
);
907 static void execlists_submit_ports(struct intel_engine_cs
*engine
)
909 struct intel_engine_execlists
*execlists
= &engine
->execlists
;
912 GEM_BUG_ON(!assert_pending_valid(execlists
, "submit"));
915 * We can skip acquiring intel_runtime_pm_get() here as it was taken
916 * on our behalf by the request (see i915_gem_mark_busy()) and it will
917 * not be relinquished until the device is idle (see
918 * i915_gem_idle_work_handler()). As a precaution, we make sure
919 * that all ELSP are drained i.e. we have processed the CSB,
920 * before allowing ourselves to idle and calling intel_runtime_pm_put().
922 GEM_BUG_ON(!intel_engine_pm_is_awake(engine
));
925 * ELSQ note: the submit queue is not cleared after being submitted
926 * to the HW so we need to make sure we always clean it up. This is
927 * currently ensured by the fact that we always write the same number
928 * of elsq entries, keep this in mind before changing the loop below.
930 for (n
= execlists_num_ports(execlists
); n
--; ) {
931 struct i915_request
*rq
= execlists
->pending
[n
];
933 write_desc(execlists
,
934 rq
? execlists_update_context(rq
) : 0,
938 /* we need to manually load the submit queue */
939 if (execlists
->ctrl_reg
)
940 writel(EL_CTRL_LOAD
, execlists
->ctrl_reg
);
943 static bool ctx_single_port_submission(const struct intel_context
*ce
)
945 return (IS_ENABLED(CONFIG_DRM_I915_GVT
) &&
946 intel_context_force_single_submission(ce
));
949 static bool can_merge_ctx(const struct intel_context
*prev
,
950 const struct intel_context
*next
)
955 if (ctx_single_port_submission(prev
))
961 static unsigned long i915_request_flags(const struct i915_request
*rq
)
963 return READ_ONCE(rq
->fence
.flags
);
966 static bool can_merge_rq(const struct i915_request
*prev
,
967 const struct i915_request
*next
)
969 GEM_BUG_ON(prev
== next
);
970 GEM_BUG_ON(!assert_priority_queue(prev
, next
));
973 * We do not submit known completed requests. Therefore if the next
974 * request is already completed, we can pretend to merge it in
975 * with the previous context (and we will skip updating the ELSP
976 * and tracking). Thus hopefully keeping the ELSP full with active
977 * contexts, despite the best efforts of preempt-to-busy to confuse
980 if (__i915_request_is_complete(next
))
983 if (unlikely((i915_request_flags(prev
) | i915_request_flags(next
)) &
984 (BIT(I915_FENCE_FLAG_NOPREEMPT
) |
985 BIT(I915_FENCE_FLAG_SENTINEL
))))
988 if (!can_merge_ctx(prev
->context
, next
->context
))
991 GEM_BUG_ON(i915_seqno_passed(prev
->fence
.seqno
, next
->fence
.seqno
));
995 static bool virtual_matches(const struct virtual_engine
*ve
,
996 const struct i915_request
*rq
,
997 const struct intel_engine_cs
*engine
)
999 const struct intel_engine_cs
*inflight
;
1004 if (!(rq
->execution_mask
& engine
->mask
)) /* We peeked too soon! */
1008 * We track when the HW has completed saving the context image
1009 * (i.e. when we have seen the final CS event switching out of
1010 * the context) and must not overwrite the context image before
1011 * then. This restricts us to only using the active engine
1012 * while the previous virtualized request is inflight (so
1013 * we reuse the register offsets). This is a very small
1014 * hystersis on the greedy seelction algorithm.
1016 inflight
= intel_context_inflight(&ve
->context
);
1017 if (inflight
&& inflight
!= engine
)
1023 static struct virtual_engine
*
1024 first_virtual_engine(struct intel_engine_cs
*engine
)
1026 struct intel_engine_execlists
*el
= &engine
->execlists
;
1027 struct rb_node
*rb
= rb_first_cached(&el
->virtual);
1030 struct virtual_engine
*ve
=
1031 rb_entry(rb
, typeof(*ve
), nodes
[engine
->id
].rb
);
1032 struct i915_request
*rq
= READ_ONCE(ve
->request
);
1034 /* lazily cleanup after another engine handled rq */
1035 if (!rq
|| !virtual_matches(ve
, rq
, engine
)) {
1036 rb_erase_cached(rb
, &el
->virtual);
1038 rb
= rb_first_cached(&el
->virtual);
1048 static void virtual_xfer_context(struct virtual_engine
*ve
,
1049 struct intel_engine_cs
*engine
)
1053 if (likely(engine
== ve
->siblings
[0]))
1056 GEM_BUG_ON(READ_ONCE(ve
->context
.inflight
));
1057 if (!intel_engine_has_relative_mmio(engine
))
1058 lrc_update_offsets(&ve
->context
, engine
);
1061 * Move the bound engine to the top of the list for
1062 * future execution. We then kick this tasklet first
1063 * before checking others, so that we preferentially
1064 * reuse this set of bound registers.
1066 for (n
= 1; n
< ve
->num_siblings
; n
++) {
1067 if (ve
->siblings
[n
] == engine
) {
1068 swap(ve
->siblings
[n
], ve
->siblings
[0]);
1074 static void defer_request(struct i915_request
*rq
, struct list_head
* const pl
)
1079 * We want to move the interrupted request to the back of
1080 * the round-robin list (i.e. its priority level), but
1081 * in doing so, we must then move all requests that were in
1082 * flight and were waiting for the interrupted request to
1083 * be run after it again.
1086 struct i915_dependency
*p
;
1088 GEM_BUG_ON(i915_request_is_active(rq
));
1089 list_move_tail(&rq
->sched
.link
, pl
);
1091 for_each_waiter(p
, rq
) {
1092 struct i915_request
*w
=
1093 container_of(p
->waiter
, typeof(*w
), sched
);
1095 if (p
->flags
& I915_DEPENDENCY_WEAK
)
1098 /* Leave semaphores spinning on the other engines */
1099 if (w
->engine
!= rq
->engine
)
1102 /* No waiter should start before its signaler */
1103 GEM_BUG_ON(i915_request_has_initial_breadcrumb(w
) &&
1104 __i915_request_has_started(w
) &&
1105 !__i915_request_is_complete(rq
));
1107 if (!i915_request_is_ready(w
))
1110 if (rq_prio(w
) < rq_prio(rq
))
1113 GEM_BUG_ON(rq_prio(w
) > rq_prio(rq
));
1114 GEM_BUG_ON(i915_request_is_active(w
));
1115 list_move_tail(&w
->sched
.link
, &list
);
1118 rq
= list_first_entry_or_null(&list
, typeof(*rq
), sched
.link
);
1122 static void defer_active(struct intel_engine_cs
*engine
)
1124 struct i915_request
*rq
;
1126 rq
= __unwind_incomplete_requests(engine
);
1130 defer_request(rq
, i915_sched_lookup_priolist(engine
->sched_engine
,
1135 timeslice_yield(const struct intel_engine_execlists
*el
,
1136 const struct i915_request
*rq
)
1139 * Once bitten, forever smitten!
1141 * If the active context ever busy-waited on a semaphore,
1142 * it will be treated as a hog until the end of its timeslice (i.e.
1143 * until it is scheduled out and replaced by a new submission,
1144 * possibly even its own lite-restore). The HW only sends an interrupt
1145 * on the first miss, and we do know if that semaphore has been
1146 * signaled, or even if it is now stuck on another semaphore. Play
1147 * safe, yield if it might be stuck -- it will be given a fresh
1148 * timeslice in the near future.
1150 return rq
->context
->lrc
.ccid
== READ_ONCE(el
->yield
);
1153 static bool needs_timeslice(const struct intel_engine_cs
*engine
,
1154 const struct i915_request
*rq
)
1156 if (!intel_engine_has_timeslices(engine
))
1159 /* If not currently active, or about to switch, wait for next event */
1160 if (!rq
|| __i915_request_is_complete(rq
))
1163 /* We do not need to start the timeslice until after the ACK */
1164 if (READ_ONCE(engine
->execlists
.pending
[0]))
1167 /* If ELSP[1] is occupied, always check to see if worth slicing */
1168 if (!list_is_last_rcu(&rq
->sched
.link
,
1169 &engine
->sched_engine
->requests
)) {
1170 ENGINE_TRACE(engine
, "timeslice required for second inflight context\n");
1174 /* Otherwise, ELSP[0] is by itself, but may be waiting in the queue */
1175 if (!i915_sched_engine_is_empty(engine
->sched_engine
)) {
1176 ENGINE_TRACE(engine
, "timeslice required for queue\n");
1180 if (!RB_EMPTY_ROOT(&engine
->execlists
.virtual.rb_root
)) {
1181 ENGINE_TRACE(engine
, "timeslice required for virtual\n");
1189 timeslice_expired(struct intel_engine_cs
*engine
, const struct i915_request
*rq
)
1191 const struct intel_engine_execlists
*el
= &engine
->execlists
;
1193 if (i915_request_has_nopreempt(rq
) && __i915_request_has_started(rq
))
1196 if (!needs_timeslice(engine
, rq
))
1199 return timer_expired(&el
->timer
) || timeslice_yield(el
, rq
);
1202 static unsigned long timeslice(const struct intel_engine_cs
*engine
)
1204 return READ_ONCE(engine
->props
.timeslice_duration_ms
);
1207 static void start_timeslice(struct intel_engine_cs
*engine
)
1209 struct intel_engine_execlists
*el
= &engine
->execlists
;
1210 unsigned long duration
;
1212 /* Disable the timer if there is nothing to switch to */
1214 if (needs_timeslice(engine
, *el
->active
)) {
1215 /* Avoid continually prolonging an active timeslice */
1216 if (timer_active(&el
->timer
)) {
1218 * If we just submitted a new ELSP after an old
1219 * context, that context may have already consumed
1220 * its timeslice, so recheck.
1222 if (!timer_pending(&el
->timer
))
1223 tasklet_hi_schedule(&engine
->sched_engine
->tasklet
);
1227 duration
= timeslice(engine
);
1230 set_timer_ms(&el
->timer
, duration
);
1233 static void record_preemption(struct intel_engine_execlists
*execlists
)
1235 (void)I915_SELFTEST_ONLY(execlists
->preempt_hang
.count
++);
1238 static unsigned long active_preempt_timeout(struct intel_engine_cs
*engine
,
1239 const struct i915_request
*rq
)
1244 /* Only allow ourselves to force reset the currently active context */
1245 engine
->execlists
.preempt_target
= rq
;
1247 /* Force a fast reset for terminated contexts (ignoring sysfs!) */
1248 if (unlikely(intel_context_is_banned(rq
->context
) || bad_request(rq
)))
1249 return INTEL_CONTEXT_BANNED_PREEMPT_TIMEOUT_MS
;
1251 return READ_ONCE(engine
->props
.preempt_timeout_ms
);
1254 static void set_preempt_timeout(struct intel_engine_cs
*engine
,
1255 const struct i915_request
*rq
)
1257 if (!intel_engine_has_preempt_reset(engine
))
1260 set_timer_ms(&engine
->execlists
.preempt
,
1261 active_preempt_timeout(engine
, rq
));
1264 static bool completed(const struct i915_request
*rq
)
1266 if (i915_request_has_sentinel(rq
))
1269 return __i915_request_is_complete(rq
);
1272 static void execlists_dequeue(struct intel_engine_cs
*engine
)
1274 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
1275 struct i915_sched_engine
* const sched_engine
= engine
->sched_engine
;
1276 struct i915_request
**port
= execlists
->pending
;
1277 struct i915_request
** const last_port
= port
+ execlists
->port_mask
;
1278 struct i915_request
*last
, * const *active
;
1279 struct virtual_engine
*ve
;
1281 bool submit
= false;
1284 * Hardware submission is through 2 ports. Conceptually each port
1285 * has a (RING_START, RING_HEAD, RING_TAIL) tuple. RING_START is
1286 * static for a context, and unique to each, so we only execute
1287 * requests belonging to a single context from each ring. RING_HEAD
1288 * is maintained by the CS in the context image, it marks the place
1289 * where it got up to last time, and through RING_TAIL we tell the CS
1290 * where we want to execute up to this time.
1292 * In this list the requests are in order of execution. Consecutive
1293 * requests from the same context are adjacent in the ringbuffer. We
1294 * can combine these requests into a single RING_TAIL update:
1296 * RING_HEAD...req1...req2
1298 * since to execute req2 the CS must first execute req1.
1300 * Our goal then is to point each port to the end of a consecutive
1301 * sequence of requests as being the most optimal (fewest wake ups
1302 * and context switches) submission.
1305 spin_lock(&sched_engine
->lock
);
1308 * If the queue is higher priority than the last
1309 * request in the currently active context, submit afresh.
1310 * We will resubmit again afterwards in case we need to split
1311 * the active context to interject the preemption request,
1312 * i.e. we will retrigger preemption following the ack in case
1316 active
= execlists
->active
;
1317 while ((last
= *active
) && completed(last
))
1321 if (need_preempt(engine
, last
)) {
1322 ENGINE_TRACE(engine
,
1323 "preempting last=%llx:%lld, prio=%d, hint=%d\n",
1324 last
->fence
.context
,
1326 last
->sched
.attr
.priority
,
1327 sched_engine
->queue_priority_hint
);
1328 record_preemption(execlists
);
1331 * Don't let the RING_HEAD advance past the breadcrumb
1332 * as we unwind (and until we resubmit) so that we do
1333 * not accidentally tell it to go backwards.
1335 ring_set_paused(engine
, 1);
1338 * Note that we have not stopped the GPU at this point,
1339 * so we are unwinding the incomplete requests as they
1340 * remain inflight and so by the time we do complete
1341 * the preemption, some of the unwound requests may
1344 __unwind_incomplete_requests(engine
);
1347 } else if (timeslice_expired(engine
, last
)) {
1348 ENGINE_TRACE(engine
,
1349 "expired:%s last=%llx:%lld, prio=%d, hint=%d, yield?=%s\n",
1350 str_yes_no(timer_expired(&execlists
->timer
)),
1351 last
->fence
.context
, last
->fence
.seqno
,
1353 sched_engine
->queue_priority_hint
,
1354 str_yes_no(timeslice_yield(execlists
, last
)));
1357 * Consume this timeslice; ensure we start a new one.
1359 * The timeslice expired, and we will unwind the
1360 * running contexts and recompute the next ELSP.
1361 * If that submit will be the same pair of contexts
1362 * (due to dependency ordering), we will skip the
1363 * submission. If we don't cancel the timer now,
1364 * we will see that the timer has expired and
1365 * reschedule the tasklet; continually until the
1366 * next context switch or other preemption event.
1368 * Since we have decided to reschedule based on
1369 * consumption of this timeslice, if we submit the
1370 * same context again, grant it a full timeslice.
1372 cancel_timer(&execlists
->timer
);
1373 ring_set_paused(engine
, 1);
1374 defer_active(engine
);
1377 * Unlike for preemption, if we rewind and continue
1378 * executing the same context as previously active,
1379 * the order of execution will remain the same and
1380 * the tail will only advance. We do not need to
1381 * force a full context restore, as a lite-restore
1382 * is sufficient to resample the monotonic TAIL.
1384 * If we switch to any other context, similarly we
1385 * will not rewind TAIL of current context, and
1386 * normal save/restore will preserve state and allow
1387 * us to later continue executing the same request.
1392 * Otherwise if we already have a request pending
1393 * for execution after the current one, we can
1394 * just wait until the next CS event before
1395 * queuing more. In either case we will force a
1396 * lite-restore preemption event, but if we wait
1397 * we hopefully coalesce several updates into a single
1402 * Even if ELSP[1] is occupied and not worthy
1403 * of timeslices, our queue might be.
1405 spin_unlock(&sched_engine
->lock
);
1411 /* XXX virtual is always taking precedence */
1412 while ((ve
= first_virtual_engine(engine
))) {
1413 struct i915_request
*rq
;
1415 spin_lock(&ve
->base
.sched_engine
->lock
);
1418 if (unlikely(!virtual_matches(ve
, rq
, engine
)))
1419 goto unlock
; /* lost the race to a sibling */
1421 GEM_BUG_ON(rq
->engine
!= &ve
->base
);
1422 GEM_BUG_ON(rq
->context
!= &ve
->context
);
1424 if (unlikely(rq_prio(rq
) < queue_prio(sched_engine
))) {
1425 spin_unlock(&ve
->base
.sched_engine
->lock
);
1429 if (last
&& !can_merge_rq(last
, rq
)) {
1430 spin_unlock(&ve
->base
.sched_engine
->lock
);
1431 spin_unlock(&engine
->sched_engine
->lock
);
1432 return; /* leave this for another sibling */
1435 ENGINE_TRACE(engine
,
1436 "virtual rq=%llx:%lld%s, new engine? %s\n",
1439 __i915_request_is_complete(rq
) ? "!" :
1440 __i915_request_has_started(rq
) ? "*" :
1442 str_yes_no(engine
!= ve
->siblings
[0]));
1444 WRITE_ONCE(ve
->request
, NULL
);
1445 WRITE_ONCE(ve
->base
.sched_engine
->queue_priority_hint
, INT_MIN
);
1447 rb
= &ve
->nodes
[engine
->id
].rb
;
1448 rb_erase_cached(rb
, &execlists
->virtual);
1451 GEM_BUG_ON(!(rq
->execution_mask
& engine
->mask
));
1452 WRITE_ONCE(rq
->engine
, engine
);
1454 if (__i915_request_submit(rq
)) {
1456 * Only after we confirm that we will submit
1457 * this request (i.e. it has not already
1458 * completed), do we want to update the context.
1460 * This serves two purposes. It avoids
1461 * unnecessary work if we are resubmitting an
1462 * already completed request after timeslicing.
1463 * But more importantly, it prevents us altering
1464 * ve->siblings[] on an idle context, where
1465 * we may be using ve->siblings[] in
1466 * virtual_context_enter / virtual_context_exit.
1468 virtual_xfer_context(ve
, engine
);
1469 GEM_BUG_ON(ve
->siblings
[0] != engine
);
1475 i915_request_put(rq
);
1477 spin_unlock(&ve
->base
.sched_engine
->lock
);
1480 * Hmm, we have a bunch of virtual engine requests,
1481 * but the first one was already completed (thanks
1482 * preempt-to-busy!). Keep looking at the veng queue
1483 * until we have no more relevant requests (i.e.
1484 * the normal submit queue has higher priority).
1490 while ((rb
= rb_first_cached(&sched_engine
->queue
))) {
1491 struct i915_priolist
*p
= to_priolist(rb
);
1492 struct i915_request
*rq
, *rn
;
1494 priolist_for_each_request_consume(rq
, rn
, p
) {
1498 * Can we combine this request with the current port?
1499 * It has to be the same context/ringbuffer and not
1500 * have any exceptions (e.g. GVT saying never to
1501 * combine contexts).
1503 * If we can combine the requests, we can execute both
1504 * by updating the RING_TAIL to point to the end of the
1505 * second request, and so we never need to tell the
1506 * hardware about the first.
1508 if (last
&& !can_merge_rq(last
, rq
)) {
1510 * If we are on the second port and cannot
1511 * combine this request with the last, then we
1514 if (port
== last_port
)
1518 * We must not populate both ELSP[] with the
1519 * same LRCA, i.e. we must submit 2 different
1520 * contexts if we submit 2 ELSP.
1522 if (last
->context
== rq
->context
)
1525 if (i915_request_has_sentinel(last
))
1529 * We avoid submitting virtual requests into
1530 * the secondary ports so that we can migrate
1531 * the request immediately to another engine
1532 * rather than wait for the primary request.
1534 if (rq
->execution_mask
!= engine
->mask
)
1538 * If GVT overrides us we only ever submit
1539 * port[0], leaving port[1] empty. Note that we
1540 * also have to be careful that we don't queue
1541 * the same context (even though a different
1542 * request) to the second port.
1544 if (ctx_single_port_submission(last
->context
) ||
1545 ctx_single_port_submission(rq
->context
))
1551 if (__i915_request_submit(rq
)) {
1553 *port
++ = i915_request_get(last
);
1558 !can_merge_ctx(last
->context
,
1561 i915_seqno_passed(last
->fence
.seqno
,
1569 rb_erase_cached(&p
->node
, &sched_engine
->queue
);
1570 i915_priolist_free(p
);
1573 *port
++ = i915_request_get(last
);
1576 * Here be a bit of magic! Or sleight-of-hand, whichever you prefer.
1578 * We choose the priority hint such that if we add a request of greater
1579 * priority than this, we kick the submission tasklet to decide on
1580 * the right order of submitting the requests to hardware. We must
1581 * also be prepared to reorder requests as they are in-flight on the
1582 * HW. We derive the priority hint then as the first "hole" in
1583 * the HW submission ports and if there are no available slots,
1584 * the priority of the lowest executing request, i.e. last.
1586 * When we do receive a higher priority request ready to run from the
1587 * user, see queue_request(), the priority hint is bumped to that
1588 * request triggering preemption on the next dequeue (or subsequent
1589 * interrupt for secondary ports).
1591 sched_engine
->queue_priority_hint
= queue_prio(sched_engine
);
1592 i915_sched_engine_reset_on_empty(sched_engine
);
1593 spin_unlock(&sched_engine
->lock
);
1596 * We can skip poking the HW if we ended up with exactly the same set
1597 * of requests as currently running, e.g. trying to timeslice a pair
1598 * of ordered contexts.
1603 (port
- execlists
->pending
) * sizeof(*port
))) {
1605 while (port
-- != execlists
->pending
)
1606 execlists_schedule_in(*port
, port
- execlists
->pending
);
1608 WRITE_ONCE(execlists
->yield
, -1);
1609 set_preempt_timeout(engine
, *active
);
1610 execlists_submit_ports(engine
);
1612 ring_set_paused(engine
, 0);
1613 while (port
-- != execlists
->pending
)
1614 i915_request_put(*port
);
1615 *execlists
->pending
= NULL
;
1619 static void execlists_dequeue_irq(struct intel_engine_cs
*engine
)
1621 local_irq_disable(); /* Suspend interrupts across request submission */
1622 execlists_dequeue(engine
);
1623 local_irq_enable(); /* flush irq_work (e.g. breadcrumb enabling) */
1626 static void clear_ports(struct i915_request
**ports
, int count
)
1628 memset_p((void **)ports
, NULL
, count
);
1632 copy_ports(struct i915_request
**dst
, struct i915_request
**src
, int count
)
1634 /* A memcpy_p() would be very useful here! */
1636 WRITE_ONCE(*dst
++, *src
++); /* avoid write tearing */
1639 static struct i915_request
**
1640 cancel_port_requests(struct intel_engine_execlists
* const execlists
,
1641 struct i915_request
**inactive
)
1643 struct i915_request
* const *port
;
1645 for (port
= execlists
->pending
; *port
; port
++)
1646 *inactive
++ = *port
;
1647 clear_ports(execlists
->pending
, ARRAY_SIZE(execlists
->pending
));
1649 /* Mark the end of active before we overwrite *active */
1650 for (port
= xchg(&execlists
->active
, execlists
->pending
); *port
; port
++)
1651 *inactive
++ = *port
;
1652 clear_ports(execlists
->inflight
, ARRAY_SIZE(execlists
->inflight
));
1654 smp_wmb(); /* complete the seqlock for execlists_active() */
1655 WRITE_ONCE(execlists
->active
, execlists
->inflight
);
1657 /* Having cancelled all outstanding process_csb(), stop their timers */
1658 GEM_BUG_ON(execlists
->pending
[0]);
1659 cancel_timer(&execlists
->timer
);
1660 cancel_timer(&execlists
->preempt
);
1666 * Starting with Gen12, the status has a new format:
1668 * bit 0: switched to new queue
1670 * bit 2: semaphore wait mode (poll or signal), only valid when
1671 * switch detail is set to "wait on semaphore"
1672 * bits 3-5: engine class
1673 * bits 6-11: engine instance
1674 * bits 12-14: reserved
1675 * bits 15-25: sw context id of the lrc the GT switched to
1676 * bits 26-31: sw counter of the lrc the GT switched to
1677 * bits 32-35: context switch detail
1679 * - 1: wait on sync flip
1680 * - 2: wait on vblank
1681 * - 3: wait on scanline
1682 * - 4: wait on semaphore
1683 * - 5: context preempted (not on SEMAPHORE_WAIT or
1686 * bits 37-43: wait detail (for switch detail 1 to 4)
1687 * bits 44-46: reserved
1688 * bits 47-57: sw context id of the lrc the GT switched away from
1689 * bits 58-63: sw counter of the lrc the GT switched away from
1691 * Xe_HP csb shuffles things around compared to TGL:
1693 * bits 0-3: context switch detail (same possible values as TGL)
1694 * bits 4-9: engine instance
1695 * bits 10-25: sw context id of the lrc the GT switched to
1696 * bits 26-31: sw counter of the lrc the GT switched to
1697 * bit 32: semaphore wait mode (poll or signal), Only valid when
1698 * switch detail is set to "wait on semaphore"
1699 * bit 33: switched to new queue
1700 * bits 34-41: wait detail (for switch detail 1 to 4)
1701 * bits 42-57: sw context id of the lrc the GT switched away from
1702 * bits 58-63: sw counter of the lrc the GT switched away from
1705 __gen12_csb_parse(bool ctx_to_valid
, bool ctx_away_valid
, bool new_queue
,
1709 * The context switch detail is not guaranteed to be 5 when a preemption
1710 * occurs, so we can't just check for that. The check below works for
1711 * all the cases we care about, including preemptions of WAIT
1712 * instructions and lite-restore. Preempt-to-idle via the CTRL register
1713 * would require some extra handling, but we don't support that.
1715 if (!ctx_away_valid
|| new_queue
) {
1716 GEM_BUG_ON(!ctx_to_valid
);
1721 * switch detail = 5 is covered by the case above and we do not expect a
1722 * context switch on an unsuccessful wait instruction since we always
1725 GEM_BUG_ON(switch_detail
);
1729 static bool xehp_csb_parse(const u64 csb
)
1731 return __gen12_csb_parse(XEHP_CSB_CTX_VALID(lower_32_bits(csb
)), /* cxt to */
1732 XEHP_CSB_CTX_VALID(upper_32_bits(csb
)), /* cxt away */
1733 upper_32_bits(csb
) & XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE
,
1734 GEN12_CTX_SWITCH_DETAIL(lower_32_bits(csb
)));
1737 static bool gen12_csb_parse(const u64 csb
)
1739 return __gen12_csb_parse(GEN12_CSB_CTX_VALID(lower_32_bits(csb
)), /* cxt to */
1740 GEN12_CSB_CTX_VALID(upper_32_bits(csb
)), /* cxt away */
1741 lower_32_bits(csb
) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE
,
1742 GEN12_CTX_SWITCH_DETAIL(upper_32_bits(csb
)));
1745 static bool gen8_csb_parse(const u64 csb
)
1747 return csb
& (GEN8_CTX_STATUS_IDLE_ACTIVE
| GEN8_CTX_STATUS_PREEMPTED
);
1751 wa_csb_read(const struct intel_engine_cs
*engine
, u64
* const csb
)
1756 * Reading from the HWSP has one particular advantage: we can detect
1757 * a stale entry. Since the write into HWSP is broken, we have no reason
1758 * to trust the HW at all, the mmio entry may equally be unordered, so
1759 * we prefer the path that is self-checking and as a last resort,
1760 * return the mmio value.
1762 * tgl,dg1:HSDES#22011327657
1765 if (wait_for_atomic_us((entry
= READ_ONCE(*csb
)) != -1, 10)) {
1766 int idx
= csb
- engine
->execlists
.csb_status
;
1769 status
= GEN8_EXECLISTS_STATUS_BUF
;
1771 status
= GEN11_EXECLISTS_STATUS_BUF2
;
1774 status
+= sizeof(u64
) * idx
;
1776 entry
= intel_uncore_read64(engine
->uncore
,
1777 _MMIO(engine
->mmio_base
+ status
));
1784 static u64
csb_read(const struct intel_engine_cs
*engine
, u64
* const csb
)
1786 u64 entry
= READ_ONCE(*csb
);
1789 * Unfortunately, the GPU does not always serialise its write
1790 * of the CSB entries before its write of the CSB pointer, at least
1791 * from the perspective of the CPU, using what is known as a Global
1792 * Observation Point. We may read a new CSB tail pointer, but then
1793 * read the stale CSB entries, causing us to misinterpret the
1794 * context-switch events, and eventually declare the GPU hung.
1796 * icl:HSDES#1806554093
1797 * tgl:HSDES#22011248461
1799 if (unlikely(entry
== -1))
1800 entry
= wa_csb_read(engine
, csb
);
1802 /* Consume this entry so that we can spot its future reuse. */
1803 WRITE_ONCE(*csb
, -1);
1805 /* ELSP is an implicit wmb() before the GPU wraps and overwrites csb */
1809 static void new_timeslice(struct intel_engine_execlists
*el
)
1811 /* By cancelling, we will start afresh in start_timeslice() */
1812 cancel_timer(&el
->timer
);
1815 static struct i915_request
**
1816 process_csb(struct intel_engine_cs
*engine
, struct i915_request
**inactive
)
1818 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
1819 u64
* const buf
= execlists
->csb_status
;
1820 const u8 num_entries
= execlists
->csb_size
;
1821 struct i915_request
**prev
;
1825 * As we modify our execlists state tracking we require exclusive
1826 * access. Either we are inside the tasklet, or the tasklet is disabled
1827 * and we assume that is only inside the reset paths and so serialised.
1829 GEM_BUG_ON(!tasklet_is_locked(&engine
->sched_engine
->tasklet
) &&
1830 !reset_in_progress(engine
));
1833 * Note that csb_write, csb_status may be either in HWSP or mmio.
1834 * When reading from the csb_write mmio register, we have to be
1835 * careful to only use the GEN8_CSB_WRITE_PTR portion, which is
1836 * the low 4bits. As it happens we know the next 4bits are always
1837 * zero and so we can simply masked off the low u8 of the register
1838 * and treat it identically to reading from the HWSP (without having
1839 * to use explicit shifting and masking, and probably bifurcating
1840 * the code to handle the legacy mmio read).
1842 head
= execlists
->csb_head
;
1843 tail
= READ_ONCE(*execlists
->csb_write
);
1844 if (unlikely(head
== tail
))
1848 * We will consume all events from HW, or at least pretend to.
1850 * The sequence of events from the HW is deterministic, and derived
1851 * from our writes to the ELSP, with a smidgen of variability for
1852 * the arrival of the asynchronous requests wrt to the inflight
1853 * execution. If the HW sends an event that does not correspond with
1854 * the one we are expecting, we have to abandon all hope as we lose
1855 * all tracking of what the engine is actually executing. We will
1856 * only detect we are out of sequence with the HW when we get an
1857 * 'impossible' event because we have already drained our own
1858 * preemption/promotion queue. If this occurs, we know that we likely
1859 * lost track of execution earlier and must unwind and restart, the
1860 * simplest way is by stop processing the event queue and force the
1863 execlists
->csb_head
= tail
;
1864 ENGINE_TRACE(engine
, "cs-irq head=%d, tail=%d\n", head
, tail
);
1867 * Hopefully paired with a wmb() in HW!
1869 * We must complete the read of the write pointer before any reads
1870 * from the CSB, so that we do not see stale values. Without an rmb
1871 * (lfence) the HW may speculatively perform the CSB[] reads *before*
1872 * we perform the READ_ONCE(*csb_write).
1876 /* Remember who was last running under the timer */
1884 if (++head
== num_entries
)
1888 * We are flying near dragons again.
1890 * We hold a reference to the request in execlist_port[]
1891 * but no more than that. We are operating in softirq
1892 * context and so cannot hold any mutex or sleep. That
1893 * prevents us stopping the requests we are processing
1894 * in port[] from being retired simultaneously (the
1895 * breadcrumb will be complete before we see the
1896 * context-switch). As we only hold the reference to the
1897 * request, any pointer chasing underneath the request
1898 * is subject to a potential use-after-free. Thus we
1899 * store all of the bookkeeping within port[] as
1900 * required, and avoid using unguarded pointers beneath
1901 * request itself. The same applies to the atomic
1905 csb
= csb_read(engine
, buf
+ head
);
1906 ENGINE_TRACE(engine
, "csb[%d]: status=0x%08x:0x%08x\n",
1907 head
, upper_32_bits(csb
), lower_32_bits(csb
));
1909 if (GRAPHICS_VER_FULL(engine
->i915
) >= IP_VER(12, 50))
1910 promote
= xehp_csb_parse(csb
);
1911 else if (GRAPHICS_VER(engine
->i915
) >= 12)
1912 promote
= gen12_csb_parse(csb
);
1914 promote
= gen8_csb_parse(csb
);
1916 struct i915_request
* const *old
= execlists
->active
;
1918 if (GEM_WARN_ON(!*execlists
->pending
)) {
1919 execlists
->error_interrupt
|= ERROR_CSB
;
1923 ring_set_paused(engine
, 0);
1925 /* Point active to the new ELSP; prevent overwriting */
1926 WRITE_ONCE(execlists
->active
, execlists
->pending
);
1927 smp_wmb(); /* notify execlists_active() */
1929 /* cancel old inflight, prepare for switch */
1930 trace_ports(execlists
, "preempted", old
);
1932 *inactive
++ = *old
++;
1934 /* switch pending to inflight */
1935 GEM_BUG_ON(!assert_pending_valid(execlists
, "promote"));
1936 copy_ports(execlists
->inflight
,
1938 execlists_num_ports(execlists
));
1939 smp_wmb(); /* complete the seqlock */
1940 WRITE_ONCE(execlists
->active
, execlists
->inflight
);
1942 /* XXX Magic delay for tgl */
1943 ENGINE_POSTING_READ(engine
, RING_CONTEXT_STATUS_PTR
);
1945 WRITE_ONCE(execlists
->pending
[0], NULL
);
1947 if (GEM_WARN_ON(!*execlists
->active
)) {
1948 execlists
->error_interrupt
|= ERROR_CSB
;
1952 /* port0 completed, advanced to port1 */
1953 trace_ports(execlists
, "completed", execlists
->active
);
1956 * We rely on the hardware being strongly
1957 * ordered, that the breadcrumb write is
1958 * coherent (visible from the CPU) before the
1959 * user interrupt is processed. One might assume
1960 * that the breadcrumb write being before the
1961 * user interrupt and the CS event for the context
1962 * switch would therefore be before the CS event
1965 if (GEM_SHOW_DEBUG() &&
1966 !__i915_request_is_complete(*execlists
->active
)) {
1967 struct i915_request
*rq
= *execlists
->active
;
1968 const u32
*regs __maybe_unused
=
1969 rq
->context
->lrc_reg_state
;
1971 ENGINE_TRACE(engine
,
1972 "context completed before request!\n");
1973 ENGINE_TRACE(engine
,
1974 "ring:{start:0x%08x, head:%04x, tail:%04x, ctl:%08x, mode:%08x}\n",
1975 ENGINE_READ(engine
, RING_START
),
1976 ENGINE_READ(engine
, RING_HEAD
) & HEAD_ADDR
,
1977 ENGINE_READ(engine
, RING_TAIL
) & TAIL_ADDR
,
1978 ENGINE_READ(engine
, RING_CTL
),
1979 ENGINE_READ(engine
, RING_MI_MODE
));
1980 ENGINE_TRACE(engine
,
1981 "rq:{start:%08x, head:%04x, tail:%04x, seqno:%llx:%d, hwsp:%d}, ",
1982 i915_ggtt_offset(rq
->ring
->vma
),
1985 lower_32_bits(rq
->fence
.seqno
),
1987 ENGINE_TRACE(engine
,
1988 "ctx:{start:%08x, head:%04x, tail:%04x}, ",
1989 regs
[CTX_RING_START
],
1990 regs
[CTX_RING_HEAD
],
1991 regs
[CTX_RING_TAIL
]);
1994 *inactive
++ = *execlists
->active
++;
1996 GEM_BUG_ON(execlists
->active
- execlists
->inflight
>
1997 execlists_num_ports(execlists
));
1999 } while (head
!= tail
);
2002 * Gen11 has proven to fail wrt global observation point between
2003 * entry and tail update, failing on the ordering and thus
2004 * we see an old entry in the context status buffer.
2006 * Forcibly evict out entries for the next gpu csb update,
2007 * to increase the odds that we get a fresh entries with non
2008 * working hardware. The cost for doing so comes out mostly with
2009 * the wash as hardware, working or not, will need to do the
2010 * invalidation before.
2012 drm_clflush_virt_range(&buf
[0], num_entries
* sizeof(buf
[0]));
2015 * We assume that any event reflects a change in context flow
2016 * and merits a fresh timeslice. We reinstall the timer after
2017 * inspecting the queue to see if we need to resumbit.
2019 if (*prev
!= *execlists
->active
) { /* elide lite-restores */
2021 * Note the inherent discrepancy between the HW runtime,
2022 * recorded as part of the context switch, and the CPU
2023 * adjustment for active contexts. We have to hope that
2024 * the delay in processing the CS event is very small
2025 * and consistent. It works to our advantage to have
2026 * the CPU adjustment _undershoot_ (i.e. start later than)
2027 * the CS timestamp so we never overreport the runtime
2028 * and correct overselves later when updating from HW.
2031 lrc_runtime_stop((*prev
)->context
);
2032 if (*execlists
->active
)
2033 lrc_runtime_start((*execlists
->active
)->context
);
2034 new_timeslice(execlists
);
2040 static void post_process_csb(struct i915_request
**port
,
2041 struct i915_request
**last
)
2043 while (port
!= last
)
2044 execlists_schedule_out(*port
++);
2047 static void __execlists_hold(struct i915_request
*rq
)
2052 struct i915_dependency
*p
;
2054 if (i915_request_is_active(rq
))
2055 __i915_request_unsubmit(rq
);
2057 clear_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
2058 list_move_tail(&rq
->sched
.link
,
2059 &rq
->engine
->sched_engine
->hold
);
2060 i915_request_set_hold(rq
);
2061 RQ_TRACE(rq
, "on hold\n");
2063 for_each_waiter(p
, rq
) {
2064 struct i915_request
*w
=
2065 container_of(p
->waiter
, typeof(*w
), sched
);
2067 if (p
->flags
& I915_DEPENDENCY_WEAK
)
2070 /* Leave semaphores spinning on the other engines */
2071 if (w
->engine
!= rq
->engine
)
2074 if (!i915_request_is_ready(w
))
2077 if (__i915_request_is_complete(w
))
2080 if (i915_request_on_hold(w
))
2083 list_move_tail(&w
->sched
.link
, &list
);
2086 rq
= list_first_entry_or_null(&list
, typeof(*rq
), sched
.link
);
2090 static bool execlists_hold(struct intel_engine_cs
*engine
,
2091 struct i915_request
*rq
)
2093 if (i915_request_on_hold(rq
))
2096 spin_lock_irq(&engine
->sched_engine
->lock
);
2098 if (__i915_request_is_complete(rq
)) { /* too late! */
2104 * Transfer this request onto the hold queue to prevent it
2105 * being resumbitted to HW (and potentially completed) before we have
2106 * released it. Since we may have already submitted following
2107 * requests, we need to remove those as well.
2109 GEM_BUG_ON(i915_request_on_hold(rq
));
2110 GEM_BUG_ON(rq
->engine
!= engine
);
2111 __execlists_hold(rq
);
2112 GEM_BUG_ON(list_empty(&engine
->sched_engine
->hold
));
2115 spin_unlock_irq(&engine
->sched_engine
->lock
);
2119 static bool hold_request(const struct i915_request
*rq
)
2121 struct i915_dependency
*p
;
2122 bool result
= false;
2125 * If one of our ancestors is on hold, we must also be on hold,
2126 * otherwise we will bypass it and execute before it.
2129 for_each_signaler(p
, rq
) {
2130 const struct i915_request
*s
=
2131 container_of(p
->signaler
, typeof(*s
), sched
);
2133 if (s
->engine
!= rq
->engine
)
2136 result
= i915_request_on_hold(s
);
2145 static void __execlists_unhold(struct i915_request
*rq
)
2150 struct i915_dependency
*p
;
2152 RQ_TRACE(rq
, "hold release\n");
2154 GEM_BUG_ON(!i915_request_on_hold(rq
));
2155 GEM_BUG_ON(!i915_sw_fence_signaled(&rq
->submit
));
2157 i915_request_clear_hold(rq
);
2158 list_move_tail(&rq
->sched
.link
,
2159 i915_sched_lookup_priolist(rq
->engine
->sched_engine
,
2161 set_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
2163 /* Also release any children on this engine that are ready */
2164 for_each_waiter(p
, rq
) {
2165 struct i915_request
*w
=
2166 container_of(p
->waiter
, typeof(*w
), sched
);
2168 if (p
->flags
& I915_DEPENDENCY_WEAK
)
2171 if (w
->engine
!= rq
->engine
)
2174 if (!i915_request_on_hold(w
))
2177 /* Check that no other parents are also on hold */
2178 if (hold_request(w
))
2181 list_move_tail(&w
->sched
.link
, &list
);
2184 rq
= list_first_entry_or_null(&list
, typeof(*rq
), sched
.link
);
2188 static void execlists_unhold(struct intel_engine_cs
*engine
,
2189 struct i915_request
*rq
)
2191 spin_lock_irq(&engine
->sched_engine
->lock
);
2194 * Move this request back to the priority queue, and all of its
2195 * children and grandchildren that were suspended along with it.
2197 __execlists_unhold(rq
);
2199 if (rq_prio(rq
) > engine
->sched_engine
->queue_priority_hint
) {
2200 engine
->sched_engine
->queue_priority_hint
= rq_prio(rq
);
2201 tasklet_hi_schedule(&engine
->sched_engine
->tasklet
);
2204 spin_unlock_irq(&engine
->sched_engine
->lock
);
2207 struct execlists_capture
{
2208 struct work_struct work
;
2209 struct i915_request
*rq
;
2210 struct i915_gpu_coredump
*error
;
2213 static void execlists_capture_work(struct work_struct
*work
)
2215 struct execlists_capture
*cap
= container_of(work
, typeof(*cap
), work
);
2216 const gfp_t gfp
= __GFP_KSWAPD_RECLAIM
| __GFP_RETRY_MAYFAIL
|
2218 struct intel_engine_cs
*engine
= cap
->rq
->engine
;
2219 struct intel_gt_coredump
*gt
= cap
->error
->gt
;
2220 struct intel_engine_capture_vma
*vma
;
2222 /* Compress all the objects attached to the request, slow! */
2223 vma
= intel_engine_coredump_add_request(gt
->engine
, cap
->rq
, gfp
);
2225 struct i915_vma_compress
*compress
=
2226 i915_vma_capture_prepare(gt
);
2228 intel_engine_coredump_add_vma(gt
->engine
, vma
, compress
);
2229 i915_vma_capture_finish(gt
, compress
);
2232 gt
->simulated
= gt
->engine
->simulated
;
2233 cap
->error
->simulated
= gt
->simulated
;
2235 /* Publish the error state, and announce it to the world */
2236 i915_error_state_store(cap
->error
);
2237 i915_gpu_coredump_put(cap
->error
);
2239 /* Return this request and all that depend upon it for signaling */
2240 execlists_unhold(engine
, cap
->rq
);
2241 i915_request_put(cap
->rq
);
2246 static struct execlists_capture
*capture_regs(struct intel_engine_cs
*engine
)
2248 const gfp_t gfp
= GFP_ATOMIC
| __GFP_NOWARN
;
2249 struct execlists_capture
*cap
;
2251 cap
= kmalloc(sizeof(*cap
), gfp
);
2255 cap
->error
= i915_gpu_coredump_alloc(engine
->i915
, gfp
);
2259 cap
->error
->gt
= intel_gt_coredump_alloc(engine
->gt
, gfp
, CORE_DUMP_FLAG_NONE
);
2260 if (!cap
->error
->gt
)
2263 cap
->error
->gt
->engine
= intel_engine_coredump_alloc(engine
, gfp
, CORE_DUMP_FLAG_NONE
);
2264 if (!cap
->error
->gt
->engine
)
2267 cap
->error
->gt
->engine
->hung
= true;
2272 kfree(cap
->error
->gt
);
2280 static struct i915_request
*
2281 active_context(struct intel_engine_cs
*engine
, u32 ccid
)
2283 const struct intel_engine_execlists
* const el
= &engine
->execlists
;
2284 struct i915_request
* const *port
, *rq
;
2287 * Use the most recent result from process_csb(), but just in case
2288 * we trigger an error (via interrupt) before the first CS event has
2289 * been written, peek at the next submission.
2292 for (port
= el
->active
; (rq
= *port
); port
++) {
2293 if (rq
->context
->lrc
.ccid
== ccid
) {
2294 ENGINE_TRACE(engine
,
2295 "ccid:%x found at active:%zd\n",
2296 ccid
, port
- el
->active
);
2301 for (port
= el
->pending
; (rq
= *port
); port
++) {
2302 if (rq
->context
->lrc
.ccid
== ccid
) {
2303 ENGINE_TRACE(engine
,
2304 "ccid:%x found at pending:%zd\n",
2305 ccid
, port
- el
->pending
);
2310 ENGINE_TRACE(engine
, "ccid:%x not found\n", ccid
);
2314 static u32
active_ccid(struct intel_engine_cs
*engine
)
2316 return ENGINE_READ_FW(engine
, RING_EXECLIST_STATUS_HI
);
2319 static void execlists_capture(struct intel_engine_cs
*engine
)
2321 struct execlists_capture
*cap
;
2323 if (!IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR
))
2327 * We need to _quickly_ capture the engine state before we reset.
2328 * We are inside an atomic section (softirq) here and we are delaying
2329 * the forced preemption event.
2331 cap
= capture_regs(engine
);
2335 spin_lock_irq(&engine
->sched_engine
->lock
);
2336 cap
->rq
= active_context(engine
, active_ccid(engine
));
2338 cap
->rq
= active_request(cap
->rq
->context
->timeline
, cap
->rq
);
2339 cap
->rq
= i915_request_get_rcu(cap
->rq
);
2341 spin_unlock_irq(&engine
->sched_engine
->lock
);
2346 * Remove the request from the execlists queue, and take ownership
2347 * of the request. We pass it to our worker who will _slowly_ compress
2348 * all the pages the _user_ requested for debugging their batch, after
2349 * which we return it to the queue for signaling.
2351 * By removing them from the execlists queue, we also remove the
2352 * requests from being processed by __unwind_incomplete_requests()
2353 * during the intel_engine_reset(), and so they will *not* be replayed
2356 * Note that because we have not yet reset the engine at this point,
2357 * it is possible for the request that we have identified as being
2358 * guilty, did in fact complete and we will then hit an arbitration
2359 * point allowing the outstanding preemption to succeed. The likelihood
2360 * of that is very low (as capturing of the engine registers should be
2361 * fast enough to run inside an irq-off atomic section!), so we will
2362 * simply hold that request accountable for being non-preemptible
2363 * long enough to force the reset.
2365 if (!execlists_hold(engine
, cap
->rq
))
2368 INIT_WORK(&cap
->work
, execlists_capture_work
);
2369 schedule_work(&cap
->work
);
2373 i915_request_put(cap
->rq
);
2375 i915_gpu_coredump_put(cap
->error
);
2379 static void execlists_reset(struct intel_engine_cs
*engine
, const char *msg
)
2381 const unsigned int bit
= I915_RESET_ENGINE
+ engine
->id
;
2382 unsigned long *lock
= &engine
->gt
->reset
.flags
;
2384 if (!intel_has_reset_engine(engine
->gt
))
2387 if (test_and_set_bit(bit
, lock
))
2390 ENGINE_TRACE(engine
, "reset for %s\n", msg
);
2392 /* Mark this tasklet as disabled to avoid waiting for it to complete */
2393 tasklet_disable_nosync(&engine
->sched_engine
->tasklet
);
2395 ring_set_paused(engine
, 1); /* Freeze the current request in place */
2396 execlists_capture(engine
);
2397 intel_engine_reset(engine
, msg
);
2399 tasklet_enable(&engine
->sched_engine
->tasklet
);
2400 clear_and_wake_up_bit(bit
, lock
);
2403 static bool preempt_timeout(const struct intel_engine_cs
*const engine
)
2405 const struct timer_list
*t
= &engine
->execlists
.preempt
;
2407 if (!CONFIG_DRM_I915_PREEMPT_TIMEOUT
)
2410 if (!timer_expired(t
))
2413 return engine
->execlists
.pending
[0];
2417 * Check the unread Context Status Buffers and manage the submission of new
2418 * contexts to the ELSP accordingly.
2420 static void execlists_submission_tasklet(struct tasklet_struct
*t
)
2422 struct i915_sched_engine
*sched_engine
=
2423 from_tasklet(sched_engine
, t
, tasklet
);
2424 struct intel_engine_cs
* const engine
= sched_engine
->private_data
;
2425 struct i915_request
*post
[2 * EXECLIST_MAX_PORTS
];
2426 struct i915_request
**inactive
;
2429 inactive
= process_csb(engine
, post
);
2430 GEM_BUG_ON(inactive
- post
> ARRAY_SIZE(post
));
2432 if (unlikely(preempt_timeout(engine
))) {
2433 const struct i915_request
*rq
= *engine
->execlists
.active
;
2436 * If after the preempt-timeout expired, we are still on the
2437 * same active request/context as before we initiated the
2438 * preemption, reset the engine.
2440 * However, if we have processed a CS event to switch contexts,
2441 * but not yet processed the CS event for the pending
2442 * preemption, reset the timer allowing the new context to
2445 cancel_timer(&engine
->execlists
.preempt
);
2446 if (rq
== engine
->execlists
.preempt_target
)
2447 engine
->execlists
.error_interrupt
|= ERROR_PREEMPT
;
2449 set_timer_ms(&engine
->execlists
.preempt
,
2450 active_preempt_timeout(engine
, rq
));
2453 if (unlikely(READ_ONCE(engine
->execlists
.error_interrupt
))) {
2456 /* Generate the error message in priority wrt to the user! */
2457 if (engine
->execlists
.error_interrupt
& GENMASK(15, 0))
2458 msg
= "CS error"; /* thrown by a user payload */
2459 else if (engine
->execlists
.error_interrupt
& ERROR_CSB
)
2460 msg
= "invalid CSB event";
2461 else if (engine
->execlists
.error_interrupt
& ERROR_PREEMPT
)
2462 msg
= "preemption time out";
2464 msg
= "internal error";
2466 engine
->execlists
.error_interrupt
= 0;
2467 execlists_reset(engine
, msg
);
2470 if (!engine
->execlists
.pending
[0]) {
2471 execlists_dequeue_irq(engine
);
2472 start_timeslice(engine
);
2475 post_process_csb(post
, inactive
);
2479 static void execlists_irq_handler(struct intel_engine_cs
*engine
, u16 iir
)
2481 bool tasklet
= false;
2483 if (unlikely(iir
& GT_CS_MASTER_ERROR_INTERRUPT
)) {
2486 /* Upper 16b are the enabling mask, rsvd for internal errors */
2487 eir
= ENGINE_READ(engine
, RING_EIR
) & GENMASK(15, 0);
2488 ENGINE_TRACE(engine
, "CS error: %x\n", eir
);
2490 /* Disable the error interrupt until after the reset */
2492 ENGINE_WRITE(engine
, RING_EMR
, ~0u);
2493 ENGINE_WRITE(engine
, RING_EIR
, eir
);
2494 WRITE_ONCE(engine
->execlists
.error_interrupt
, eir
);
2499 if (iir
& GT_WAIT_SEMAPHORE_INTERRUPT
) {
2500 WRITE_ONCE(engine
->execlists
.yield
,
2501 ENGINE_READ_FW(engine
, RING_EXECLIST_STATUS_HI
));
2502 ENGINE_TRACE(engine
, "semaphore yield: %08x\n",
2503 engine
->execlists
.yield
);
2504 if (del_timer(&engine
->execlists
.timer
))
2508 if (iir
& GT_CONTEXT_SWITCH_INTERRUPT
)
2511 if (iir
& GT_RENDER_USER_INTERRUPT
)
2512 intel_engine_signal_breadcrumbs(engine
);
2515 tasklet_hi_schedule(&engine
->sched_engine
->tasklet
);
2518 static void __execlists_kick(struct intel_engine_execlists
*execlists
)
2520 struct intel_engine_cs
*engine
=
2521 container_of(execlists
, typeof(*engine
), execlists
);
2523 /* Kick the tasklet for some interrupt coalescing and reset handling */
2524 tasklet_hi_schedule(&engine
->sched_engine
->tasklet
);
2527 #define execlists_kick(t, member) \
2528 __execlists_kick(container_of(t, struct intel_engine_execlists, member))
2530 static void execlists_timeslice(struct timer_list
*timer
)
2532 execlists_kick(timer
, timer
);
2535 static void execlists_preempt(struct timer_list
*timer
)
2537 execlists_kick(timer
, preempt
);
2540 static void queue_request(struct intel_engine_cs
*engine
,
2541 struct i915_request
*rq
)
2543 GEM_BUG_ON(!list_empty(&rq
->sched
.link
));
2544 list_add_tail(&rq
->sched
.link
,
2545 i915_sched_lookup_priolist(engine
->sched_engine
,
2547 set_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
2550 static bool submit_queue(struct intel_engine_cs
*engine
,
2551 const struct i915_request
*rq
)
2553 struct i915_sched_engine
*sched_engine
= engine
->sched_engine
;
2555 if (rq_prio(rq
) <= sched_engine
->queue_priority_hint
)
2558 sched_engine
->queue_priority_hint
= rq_prio(rq
);
2562 static bool ancestor_on_hold(const struct intel_engine_cs
*engine
,
2563 const struct i915_request
*rq
)
2565 GEM_BUG_ON(i915_request_on_hold(rq
));
2566 return !list_empty(&engine
->sched_engine
->hold
) && hold_request(rq
);
2569 static void execlists_submit_request(struct i915_request
*request
)
2571 struct intel_engine_cs
*engine
= request
->engine
;
2572 unsigned long flags
;
2574 /* Will be called from irq-context when using foreign fences. */
2575 spin_lock_irqsave(&engine
->sched_engine
->lock
, flags
);
2577 if (unlikely(ancestor_on_hold(engine
, request
))) {
2578 RQ_TRACE(request
, "ancestor on hold\n");
2579 list_add_tail(&request
->sched
.link
,
2580 &engine
->sched_engine
->hold
);
2581 i915_request_set_hold(request
);
2583 queue_request(engine
, request
);
2585 GEM_BUG_ON(i915_sched_engine_is_empty(engine
->sched_engine
));
2586 GEM_BUG_ON(list_empty(&request
->sched
.link
));
2588 if (submit_queue(engine
, request
))
2589 __execlists_kick(&engine
->execlists
);
2592 spin_unlock_irqrestore(&engine
->sched_engine
->lock
, flags
);
2596 __execlists_context_pre_pin(struct intel_context
*ce
,
2597 struct intel_engine_cs
*engine
,
2598 struct i915_gem_ww_ctx
*ww
, void **vaddr
)
2602 err
= lrc_pre_pin(ce
, engine
, ww
, vaddr
);
2606 if (!__test_and_set_bit(CONTEXT_INIT_BIT
, &ce
->flags
)) {
2607 lrc_init_state(ce
, engine
, *vaddr
);
2609 __i915_gem_object_flush_map(ce
->state
->obj
, 0, engine
->context_size
);
2615 static int execlists_context_pre_pin(struct intel_context
*ce
,
2616 struct i915_gem_ww_ctx
*ww
,
2619 return __execlists_context_pre_pin(ce
, ce
->engine
, ww
, vaddr
);
2622 static int execlists_context_pin(struct intel_context
*ce
, void *vaddr
)
2624 return lrc_pin(ce
, ce
->engine
, vaddr
);
2627 static int execlists_context_alloc(struct intel_context
*ce
)
2629 return lrc_alloc(ce
, ce
->engine
);
2632 static void execlists_context_cancel_request(struct intel_context
*ce
,
2633 struct i915_request
*rq
)
2635 struct intel_engine_cs
*engine
= NULL
;
2637 i915_request_active_engine(rq
, &engine
);
2639 if (engine
&& intel_engine_pulse(engine
))
2640 intel_gt_handle_error(engine
->gt
, engine
->mask
, 0,
2641 "request cancellation by %s",
2645 static struct intel_context
*
2646 execlists_create_parallel(struct intel_engine_cs
**engines
,
2647 unsigned int num_siblings
,
2650 struct intel_context
*parent
= NULL
, *ce
, *err
;
2653 GEM_BUG_ON(num_siblings
!= 1);
2655 for (i
= 0; i
< width
; ++i
) {
2656 ce
= intel_context_create(engines
[i
]);
2665 intel_context_bind_parent_child(parent
, ce
);
2668 parent
->parallel
.fence_context
= dma_fence_context_alloc(1);
2670 intel_context_set_nopreempt(parent
);
2671 for_each_child(parent
, ce
)
2672 intel_context_set_nopreempt(ce
);
2678 intel_context_put(parent
);
2682 static const struct intel_context_ops execlists_context_ops
= {
2683 .flags
= COPS_HAS_INFLIGHT
| COPS_RUNTIME_CYCLES
,
2685 .alloc
= execlists_context_alloc
,
2687 .cancel_request
= execlists_context_cancel_request
,
2689 .pre_pin
= execlists_context_pre_pin
,
2690 .pin
= execlists_context_pin
,
2692 .post_unpin
= lrc_post_unpin
,
2694 .enter
= intel_context_enter_engine
,
2695 .exit
= intel_context_exit_engine
,
2698 .destroy
= lrc_destroy
,
2700 .create_parallel
= execlists_create_parallel
,
2701 .create_virtual
= execlists_create_virtual
,
2704 static int emit_pdps(struct i915_request
*rq
)
2706 const struct intel_engine_cs
* const engine
= rq
->engine
;
2707 struct i915_ppgtt
* const ppgtt
= i915_vm_to_ppgtt(rq
->context
->vm
);
2711 GEM_BUG_ON(intel_vgpu_active(rq
->engine
->i915
));
2714 * Beware ye of the dragons, this sequence is magic!
2716 * Small changes to this sequence can cause anything from
2717 * GPU hangs to forcewake errors and machine lockups!
2720 cs
= intel_ring_begin(rq
, 2);
2724 *cs
++ = MI_ARB_ON_OFF
| MI_ARB_DISABLE
;
2726 intel_ring_advance(rq
, cs
);
2728 /* Flush any residual operations from the context load */
2729 err
= engine
->emit_flush(rq
, EMIT_FLUSH
);
2733 /* Magic required to prevent forcewake errors! */
2734 err
= engine
->emit_flush(rq
, EMIT_INVALIDATE
);
2738 cs
= intel_ring_begin(rq
, 4 * GEN8_3LVL_PDPES
+ 2);
2742 /* Ensure the LRI have landed before we invalidate & continue */
2743 *cs
++ = MI_LOAD_REGISTER_IMM(2 * GEN8_3LVL_PDPES
) | MI_LRI_FORCE_POSTED
;
2744 for (i
= GEN8_3LVL_PDPES
; i
--; ) {
2745 const dma_addr_t pd_daddr
= i915_page_dir_dma_addr(ppgtt
, i
);
2746 u32 base
= engine
->mmio_base
;
2748 *cs
++ = i915_mmio_reg_offset(GEN8_RING_PDP_UDW(base
, i
));
2749 *cs
++ = upper_32_bits(pd_daddr
);
2750 *cs
++ = i915_mmio_reg_offset(GEN8_RING_PDP_LDW(base
, i
));
2751 *cs
++ = lower_32_bits(pd_daddr
);
2753 *cs
++ = MI_ARB_ON_OFF
| MI_ARB_ENABLE
;
2754 intel_ring_advance(rq
, cs
);
2756 intel_ring_advance(rq
, cs
);
2761 static int execlists_request_alloc(struct i915_request
*request
)
2765 GEM_BUG_ON(!intel_context_is_pinned(request
->context
));
2768 * Flush enough space to reduce the likelihood of waiting after
2769 * we start building the request - in which case we will just
2770 * have to repeat work.
2772 request
->reserved_space
+= EXECLISTS_REQUEST_SIZE
;
2775 * Note that after this point, we have committed to using
2776 * this request as it is being used to both track the
2777 * state of engine initialisation and liveness of the
2778 * golden renderstate above. Think twice before you try
2779 * to cancel/unwind this request now.
2782 if (!i915_vm_is_4lvl(request
->context
->vm
)) {
2783 ret
= emit_pdps(request
);
2788 /* Unconditionally invalidate GPU caches and TLBs. */
2789 ret
= request
->engine
->emit_flush(request
, EMIT_INVALIDATE
);
2793 request
->reserved_space
-= EXECLISTS_REQUEST_SIZE
;
2797 static void reset_csb_pointers(struct intel_engine_cs
*engine
)
2799 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
2800 const unsigned int reset_value
= execlists
->csb_size
- 1;
2802 ring_set_paused(engine
, 0);
2805 * Sometimes Icelake forgets to reset its pointers on a GPU reset.
2806 * Bludgeon them with a mmio update to be sure.
2808 ENGINE_WRITE(engine
, RING_CONTEXT_STATUS_PTR
,
2809 0xffff << 16 | reset_value
<< 8 | reset_value
);
2810 ENGINE_POSTING_READ(engine
, RING_CONTEXT_STATUS_PTR
);
2813 * After a reset, the HW starts writing into CSB entry [0]. We
2814 * therefore have to set our HEAD pointer back one entry so that
2815 * the *first* entry we check is entry 0. To complicate this further,
2816 * as we don't wait for the first interrupt after reset, we have to
2817 * fake the HW write to point back to the last entry so that our
2818 * inline comparison of our cached head position against the last HW
2819 * write works even before the first interrupt.
2821 execlists
->csb_head
= reset_value
;
2822 WRITE_ONCE(*execlists
->csb_write
, reset_value
);
2823 wmb(); /* Make sure this is visible to HW (paranoia?) */
2825 /* Check that the GPU does indeed update the CSB entries! */
2826 memset(execlists
->csb_status
, -1, (reset_value
+ 1) * sizeof(u64
));
2827 drm_clflush_virt_range(execlists
->csb_status
,
2828 execlists
->csb_size
*
2829 sizeof(execlists
->csb_status
));
2831 /* Once more for luck and our trusty paranoia */
2832 ENGINE_WRITE(engine
, RING_CONTEXT_STATUS_PTR
,
2833 0xffff << 16 | reset_value
<< 8 | reset_value
);
2834 ENGINE_POSTING_READ(engine
, RING_CONTEXT_STATUS_PTR
);
2836 GEM_BUG_ON(READ_ONCE(*execlists
->csb_write
) != reset_value
);
2839 static void sanitize_hwsp(struct intel_engine_cs
*engine
)
2841 struct intel_timeline
*tl
;
2843 list_for_each_entry(tl
, &engine
->status_page
.timelines
, engine_link
)
2844 intel_timeline_reset_seqno(tl
);
2847 static void execlists_sanitize(struct intel_engine_cs
*engine
)
2849 GEM_BUG_ON(execlists_active(&engine
->execlists
));
2852 * Poison residual state on resume, in case the suspend didn't!
2854 * We have to assume that across suspend/resume (or other loss
2855 * of control) that the contents of our pinned buffers has been
2856 * lost, replaced by garbage. Since this doesn't always happen,
2857 * let's poison such state so that we more quickly spot when
2858 * we falsely assume it has been preserved.
2860 if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM
))
2861 memset(engine
->status_page
.addr
, POISON_INUSE
, PAGE_SIZE
);
2863 reset_csb_pointers(engine
);
2866 * The kernel_context HWSP is stored in the status_page. As above,
2867 * that may be lost on resume/initialisation, and so we need to
2868 * reset the value in the HWSP.
2870 sanitize_hwsp(engine
);
2872 /* And scrub the dirty cachelines for the HWSP */
2873 drm_clflush_virt_range(engine
->status_page
.addr
, PAGE_SIZE
);
2875 intel_engine_reset_pinned_contexts(engine
);
2878 static void enable_error_interrupt(struct intel_engine_cs
*engine
)
2882 engine
->execlists
.error_interrupt
= 0;
2883 ENGINE_WRITE(engine
, RING_EMR
, ~0u);
2884 ENGINE_WRITE(engine
, RING_EIR
, ~0u); /* clear all existing errors */
2886 status
= ENGINE_READ(engine
, RING_ESR
);
2887 if (unlikely(status
)) {
2888 drm_err(&engine
->i915
->drm
,
2889 "engine '%s' resumed still in error: %08x\n",
2890 engine
->name
, status
);
2891 __intel_gt_reset(engine
->gt
, engine
->mask
);
2895 * On current gen8+, we have 2 signals to play with
2897 * - I915_ERROR_INSTUCTION (bit 0)
2899 * Generate an error if the command parser encounters an invalid
2902 * This is a fatal error.
2906 * Generate an error on privilege violation (where the CP replaces
2907 * the instruction with a no-op). This also fires for writes into
2908 * read-only scratch pages.
2910 * This is a non-fatal error, parsing continues.
2912 * * there are a few others defined for odd HW that we do not use
2914 * Since CP_PRIV fires for cases where we have chosen to ignore the
2915 * error (as the HW is validating and suppressing the mistakes), we
2916 * only unmask the instruction error bit.
2918 ENGINE_WRITE(engine
, RING_EMR
, ~I915_ERROR_INSTRUCTION
);
2921 static void enable_execlists(struct intel_engine_cs
*engine
)
2925 assert_forcewakes_active(engine
->uncore
, FORCEWAKE_ALL
);
2927 intel_engine_set_hwsp_writemask(engine
, ~0u); /* HWSTAM */
2929 if (GRAPHICS_VER(engine
->i915
) >= 11)
2930 mode
= _MASKED_BIT_ENABLE(GEN11_GFX_DISABLE_LEGACY_MODE
);
2932 mode
= _MASKED_BIT_ENABLE(GFX_RUN_LIST_ENABLE
);
2933 ENGINE_WRITE_FW(engine
, RING_MODE_GEN7
, mode
);
2935 ENGINE_WRITE_FW(engine
, RING_MI_MODE
, _MASKED_BIT_DISABLE(STOP_RING
));
2937 ENGINE_WRITE_FW(engine
,
2939 i915_ggtt_offset(engine
->status_page
.vma
));
2940 ENGINE_POSTING_READ(engine
, RING_HWS_PGA
);
2942 enable_error_interrupt(engine
);
2945 static int execlists_resume(struct intel_engine_cs
*engine
)
2947 intel_mocs_init_engine(engine
);
2948 intel_breadcrumbs_reset(engine
->breadcrumbs
);
2950 enable_execlists(engine
);
2952 if (engine
->flags
& I915_ENGINE_FIRST_RENDER_COMPUTE
)
2953 xehp_enable_ccs_engines(engine
);
2958 static void execlists_reset_prepare(struct intel_engine_cs
*engine
)
2960 ENGINE_TRACE(engine
, "depth<-%d\n",
2961 atomic_read(&engine
->sched_engine
->tasklet
.count
));
2964 * Prevent request submission to the hardware until we have
2965 * completed the reset in i915_gem_reset_finish(). If a request
2966 * is completed by one engine, it may then queue a request
2967 * to a second via its execlists->tasklet *just* as we are
2968 * calling engine->resume() and also writing the ELSP.
2969 * Turning off the execlists->tasklet until the reset is over
2970 * prevents the race.
2972 __tasklet_disable_sync_once(&engine
->sched_engine
->tasklet
);
2973 GEM_BUG_ON(!reset_in_progress(engine
));
2976 * We stop engines, otherwise we might get failed reset and a
2977 * dead gpu (on elk). Also as modern gpu as kbl can suffer
2978 * from system hang if batchbuffer is progressing when
2979 * the reset is issued, regardless of READY_TO_RESET ack.
2980 * Thus assume it is best to stop engines on all gens
2981 * where we have a gpu reset.
2983 * WaKBLVECSSemaphoreWaitPoll:kbl (on ALL_ENGINES)
2985 * FIXME: Wa for more modern gens needs to be validated
2987 ring_set_paused(engine
, 1);
2988 intel_engine_stop_cs(engine
);
2991 * Wa_22011802037:gen11/gen12: In addition to stopping the cs, we need
2992 * to wait for any pending mi force wakeups
2994 if (IS_GRAPHICS_VER(engine
->i915
, 11, 12))
2995 intel_engine_wait_for_pending_mi_fw(engine
);
2997 engine
->execlists
.reset_ccid
= active_ccid(engine
);
3000 static struct i915_request
**
3001 reset_csb(struct intel_engine_cs
*engine
, struct i915_request
**inactive
)
3003 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
3005 drm_clflush_virt_range(execlists
->csb_write
,
3006 sizeof(execlists
->csb_write
[0]));
3008 inactive
= process_csb(engine
, inactive
); /* drain preemption events */
3010 /* Following the reset, we need to reload the CSB read/write pointers */
3011 reset_csb_pointers(engine
);
3017 execlists_reset_active(struct intel_engine_cs
*engine
, bool stalled
)
3019 struct intel_context
*ce
;
3020 struct i915_request
*rq
;
3024 * Save the currently executing context, even if we completed
3025 * its request, it was still running at the time of the
3026 * reset and will have been clobbered.
3028 rq
= active_context(engine
, engine
->execlists
.reset_ccid
);
3033 GEM_BUG_ON(!i915_vma_is_pinned(ce
->state
));
3035 if (__i915_request_is_complete(rq
)) {
3036 /* Idle context; tidy up the ring so we can restart afresh */
3037 head
= intel_ring_wrap(ce
->ring
, rq
->tail
);
3041 /* We still have requests in-flight; the engine should be active */
3042 GEM_BUG_ON(!intel_engine_pm_is_awake(engine
));
3044 /* Context has requests still in-flight; it should not be idle! */
3045 GEM_BUG_ON(i915_active_is_idle(&ce
->active
));
3047 rq
= active_request(ce
->timeline
, rq
);
3048 head
= intel_ring_wrap(ce
->ring
, rq
->head
);
3049 GEM_BUG_ON(head
== ce
->ring
->tail
);
3052 * If this request hasn't started yet, e.g. it is waiting on a
3053 * semaphore, we need to avoid skipping the request or else we
3054 * break the signaling chain. However, if the context is corrupt
3055 * the request will not restart and we will be stuck with a wedged
3056 * device. It is quite often the case that if we issue a reset
3057 * while the GPU is loading the context image, that the context
3058 * image becomes corrupt.
3060 * Otherwise, if we have not started yet, the request should replay
3061 * perfectly and we do not need to flag the result as being erroneous.
3063 if (!__i915_request_has_started(rq
))
3067 * If the request was innocent, we leave the request in the ELSP
3068 * and will try to replay it on restarting. The context image may
3069 * have been corrupted by the reset, in which case we may have
3070 * to service a new GPU hang, but more likely we can continue on
3073 * If the request was guilty, we presume the context is corrupt
3074 * and have to at least restore the RING register in the context
3075 * image back to the expected values to skip over the guilty request.
3077 __i915_request_reset(rq
, stalled
);
3080 * We want a simple context + ring to execute the breadcrumb update.
3081 * We cannot rely on the context being intact across the GPU hang,
3082 * so clear it and rebuild just what we need for the breadcrumb.
3083 * All pending requests for this context will be zapped, and any
3084 * future request will be after userspace has had the opportunity
3085 * to recreate its own state.
3088 ENGINE_TRACE(engine
, "replay {head:%04x, tail:%04x}\n",
3089 head
, ce
->ring
->tail
);
3090 lrc_reset_regs(ce
, engine
);
3091 ce
->lrc
.lrca
= lrc_update_regs(ce
, engine
, head
);
3094 static void execlists_reset_csb(struct intel_engine_cs
*engine
, bool stalled
)
3096 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
3097 struct i915_request
*post
[2 * EXECLIST_MAX_PORTS
];
3098 struct i915_request
**inactive
;
3101 inactive
= reset_csb(engine
, post
);
3103 execlists_reset_active(engine
, true);
3105 inactive
= cancel_port_requests(execlists
, inactive
);
3106 post_process_csb(post
, inactive
);
3110 static void execlists_reset_rewind(struct intel_engine_cs
*engine
, bool stalled
)
3112 unsigned long flags
;
3114 ENGINE_TRACE(engine
, "\n");
3116 /* Process the csb, find the guilty context and throw away */
3117 execlists_reset_csb(engine
, stalled
);
3119 /* Push back any incomplete requests for replay after the reset. */
3121 spin_lock_irqsave(&engine
->sched_engine
->lock
, flags
);
3122 __unwind_incomplete_requests(engine
);
3123 spin_unlock_irqrestore(&engine
->sched_engine
->lock
, flags
);
3127 static void nop_submission_tasklet(struct tasklet_struct
*t
)
3129 struct i915_sched_engine
*sched_engine
=
3130 from_tasklet(sched_engine
, t
, tasklet
);
3131 struct intel_engine_cs
* const engine
= sched_engine
->private_data
;
3133 /* The driver is wedged; don't process any more events. */
3134 WRITE_ONCE(engine
->sched_engine
->queue_priority_hint
, INT_MIN
);
3137 static void execlists_reset_cancel(struct intel_engine_cs
*engine
)
3139 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
3140 struct i915_sched_engine
* const sched_engine
= engine
->sched_engine
;
3141 struct i915_request
*rq
, *rn
;
3143 unsigned long flags
;
3145 ENGINE_TRACE(engine
, "\n");
3148 * Before we call engine->cancel_requests(), we should have exclusive
3149 * access to the submission state. This is arranged for us by the
3150 * caller disabling the interrupt generation, the tasklet and other
3151 * threads that may then access the same state, giving us a free hand
3152 * to reset state. However, we still need to let lockdep be aware that
3153 * we know this state may be accessed in hardirq context, so we
3154 * disable the irq around this manipulation and we want to keep
3155 * the spinlock focused on its duties and not accidentally conflate
3156 * coverage to the submission's irq state. (Similarly, although we
3157 * shouldn't need to disable irq around the manipulation of the
3158 * submission's irq state, we also wish to remind ourselves that
3161 execlists_reset_csb(engine
, true);
3164 spin_lock_irqsave(&engine
->sched_engine
->lock
, flags
);
3166 /* Mark all executing requests as skipped. */
3167 list_for_each_entry(rq
, &engine
->sched_engine
->requests
, sched
.link
)
3168 i915_request_put(i915_request_mark_eio(rq
));
3169 intel_engine_signal_breadcrumbs(engine
);
3171 /* Flush the queued requests to the timeline list (for retiring). */
3172 while ((rb
= rb_first_cached(&sched_engine
->queue
))) {
3173 struct i915_priolist
*p
= to_priolist(rb
);
3175 priolist_for_each_request_consume(rq
, rn
, p
) {
3176 if (i915_request_mark_eio(rq
)) {
3177 __i915_request_submit(rq
);
3178 i915_request_put(rq
);
3182 rb_erase_cached(&p
->node
, &sched_engine
->queue
);
3183 i915_priolist_free(p
);
3186 /* On-hold requests will be flushed to timeline upon their release */
3187 list_for_each_entry(rq
, &sched_engine
->hold
, sched
.link
)
3188 i915_request_put(i915_request_mark_eio(rq
));
3190 /* Cancel all attached virtual engines */
3191 while ((rb
= rb_first_cached(&execlists
->virtual))) {
3192 struct virtual_engine
*ve
=
3193 rb_entry(rb
, typeof(*ve
), nodes
[engine
->id
].rb
);
3195 rb_erase_cached(rb
, &execlists
->virtual);
3198 spin_lock(&ve
->base
.sched_engine
->lock
);
3199 rq
= fetch_and_zero(&ve
->request
);
3201 if (i915_request_mark_eio(rq
)) {
3202 rq
->engine
= engine
;
3203 __i915_request_submit(rq
);
3204 i915_request_put(rq
);
3206 i915_request_put(rq
);
3208 ve
->base
.sched_engine
->queue_priority_hint
= INT_MIN
;
3210 spin_unlock(&ve
->base
.sched_engine
->lock
);
3213 /* Remaining _unready_ requests will be nop'ed when submitted */
3215 sched_engine
->queue_priority_hint
= INT_MIN
;
3216 sched_engine
->queue
= RB_ROOT_CACHED
;
3218 GEM_BUG_ON(__tasklet_is_enabled(&engine
->sched_engine
->tasklet
));
3219 engine
->sched_engine
->tasklet
.callback
= nop_submission_tasklet
;
3221 spin_unlock_irqrestore(&engine
->sched_engine
->lock
, flags
);
3225 static void execlists_reset_finish(struct intel_engine_cs
*engine
)
3227 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
3230 * After a GPU reset, we may have requests to replay. Do so now while
3231 * we still have the forcewake to be sure that the GPU is not allowed
3232 * to sleep before we restart and reload a context.
3234 * If the GPU reset fails, the engine may still be alive with requests
3235 * inflight. We expect those to complete, or for the device to be
3236 * reset as the next level of recovery, and as a final resort we
3237 * will declare the device wedged.
3239 GEM_BUG_ON(!reset_in_progress(engine
));
3241 /* And kick in case we missed a new request submission. */
3242 if (__tasklet_enable(&engine
->sched_engine
->tasklet
))
3243 __execlists_kick(execlists
);
3245 ENGINE_TRACE(engine
, "depth->%d\n",
3246 atomic_read(&engine
->sched_engine
->tasklet
.count
));
3249 static void gen8_logical_ring_enable_irq(struct intel_engine_cs
*engine
)
3251 ENGINE_WRITE(engine
, RING_IMR
,
3252 ~(engine
->irq_enable_mask
| engine
->irq_keep_mask
));
3253 ENGINE_POSTING_READ(engine
, RING_IMR
);
3256 static void gen8_logical_ring_disable_irq(struct intel_engine_cs
*engine
)
3258 ENGINE_WRITE(engine
, RING_IMR
, ~engine
->irq_keep_mask
);
3261 static void execlists_park(struct intel_engine_cs
*engine
)
3263 cancel_timer(&engine
->execlists
.timer
);
3264 cancel_timer(&engine
->execlists
.preempt
);
3267 static void add_to_engine(struct i915_request
*rq
)
3269 lockdep_assert_held(&rq
->engine
->sched_engine
->lock
);
3270 list_move_tail(&rq
->sched
.link
, &rq
->engine
->sched_engine
->requests
);
3273 static void remove_from_engine(struct i915_request
*rq
)
3275 struct intel_engine_cs
*engine
, *locked
;
3278 * Virtual engines complicate acquiring the engine timeline lock,
3279 * as their rq->engine pointer is not stable until under that
3280 * engine lock. The simple ploy we use is to take the lock then
3281 * check that the rq still belongs to the newly locked engine.
3283 locked
= READ_ONCE(rq
->engine
);
3284 spin_lock_irq(&locked
->sched_engine
->lock
);
3285 while (unlikely(locked
!= (engine
= READ_ONCE(rq
->engine
)))) {
3286 spin_unlock(&locked
->sched_engine
->lock
);
3287 spin_lock(&engine
->sched_engine
->lock
);
3290 list_del_init(&rq
->sched
.link
);
3292 clear_bit(I915_FENCE_FLAG_PQUEUE
, &rq
->fence
.flags
);
3293 clear_bit(I915_FENCE_FLAG_HOLD
, &rq
->fence
.flags
);
3295 /* Prevent further __await_execution() registering a cb, then flush */
3296 set_bit(I915_FENCE_FLAG_ACTIVE
, &rq
->fence
.flags
);
3298 spin_unlock_irq(&locked
->sched_engine
->lock
);
3300 i915_request_notify_execute_cb_imm(rq
);
3303 static bool can_preempt(struct intel_engine_cs
*engine
)
3305 if (GRAPHICS_VER(engine
->i915
) > 8)
3308 /* GPGPU on bdw requires extra w/a; not implemented */
3309 return engine
->class != RENDER_CLASS
;
3312 static void kick_execlists(const struct i915_request
*rq
, int prio
)
3314 struct intel_engine_cs
*engine
= rq
->engine
;
3315 struct i915_sched_engine
*sched_engine
= engine
->sched_engine
;
3316 const struct i915_request
*inflight
;
3319 * We only need to kick the tasklet once for the high priority
3320 * new context we add into the queue.
3322 if (prio
<= sched_engine
->queue_priority_hint
)
3327 /* Nothing currently active? We're overdue for a submission! */
3328 inflight
= execlists_active(&engine
->execlists
);
3333 * If we are already the currently executing context, don't
3334 * bother evaluating if we should preempt ourselves.
3336 if (inflight
->context
== rq
->context
)
3339 ENGINE_TRACE(engine
,
3340 "bumping queue-priority-hint:%d for rq:%llx:%lld, inflight:%llx:%lld prio %d\n",
3342 rq
->fence
.context
, rq
->fence
.seqno
,
3343 inflight
->fence
.context
, inflight
->fence
.seqno
,
3344 inflight
->sched
.attr
.priority
);
3346 sched_engine
->queue_priority_hint
= prio
;
3349 * Allow preemption of low -> normal -> high, but we do
3350 * not allow low priority tasks to preempt other low priority
3351 * tasks under the impression that latency for low priority
3352 * tasks does not matter (as much as background throughput),
3355 if (prio
>= max(I915_PRIORITY_NORMAL
, rq_prio(inflight
)))
3356 tasklet_hi_schedule(&sched_engine
->tasklet
);
3362 static void execlists_set_default_submission(struct intel_engine_cs
*engine
)
3364 engine
->submit_request
= execlists_submit_request
;
3365 engine
->sched_engine
->schedule
= i915_schedule
;
3366 engine
->sched_engine
->kick_backend
= kick_execlists
;
3367 engine
->sched_engine
->tasklet
.callback
= execlists_submission_tasklet
;
3370 static void execlists_shutdown(struct intel_engine_cs
*engine
)
3372 /* Synchronise with residual timers and any softirq they raise */
3373 del_timer_sync(&engine
->execlists
.timer
);
3374 del_timer_sync(&engine
->execlists
.preempt
);
3375 tasklet_kill(&engine
->sched_engine
->tasklet
);
3378 static void execlists_release(struct intel_engine_cs
*engine
)
3380 engine
->sanitize
= NULL
; /* no longer in control, nothing to sanitize */
3382 execlists_shutdown(engine
);
3384 intel_engine_cleanup_common(engine
);
3385 lrc_fini_wa_ctx(engine
);
3388 static ktime_t
__execlists_engine_busyness(struct intel_engine_cs
*engine
,
3391 struct intel_engine_execlists_stats
*stats
= &engine
->stats
.execlists
;
3392 ktime_t total
= stats
->total
;
3395 * If the engine is executing something at the moment
3396 * add it to the total.
3399 if (READ_ONCE(stats
->active
))
3400 total
= ktime_add(total
, ktime_sub(*now
, stats
->start
));
3405 static ktime_t
execlists_engine_busyness(struct intel_engine_cs
*engine
,
3408 struct intel_engine_execlists_stats
*stats
= &engine
->stats
.execlists
;
3413 seq
= read_seqcount_begin(&stats
->lock
);
3414 total
= __execlists_engine_busyness(engine
, now
);
3415 } while (read_seqcount_retry(&stats
->lock
, seq
));
3421 logical_ring_default_vfuncs(struct intel_engine_cs
*engine
)
3423 /* Default vfuncs which can be overridden by each engine. */
3425 engine
->resume
= execlists_resume
;
3427 engine
->cops
= &execlists_context_ops
;
3428 engine
->request_alloc
= execlists_request_alloc
;
3429 engine
->add_active_request
= add_to_engine
;
3430 engine
->remove_active_request
= remove_from_engine
;
3432 engine
->reset
.prepare
= execlists_reset_prepare
;
3433 engine
->reset
.rewind
= execlists_reset_rewind
;
3434 engine
->reset
.cancel
= execlists_reset_cancel
;
3435 engine
->reset
.finish
= execlists_reset_finish
;
3437 engine
->park
= execlists_park
;
3438 engine
->unpark
= NULL
;
3440 engine
->emit_flush
= gen8_emit_flush_xcs
;
3441 engine
->emit_init_breadcrumb
= gen8_emit_init_breadcrumb
;
3442 engine
->emit_fini_breadcrumb
= gen8_emit_fini_breadcrumb_xcs
;
3443 if (GRAPHICS_VER(engine
->i915
) >= 12) {
3444 engine
->emit_fini_breadcrumb
= gen12_emit_fini_breadcrumb_xcs
;
3445 engine
->emit_flush
= gen12_emit_flush_xcs
;
3447 engine
->set_default_submission
= execlists_set_default_submission
;
3449 if (GRAPHICS_VER(engine
->i915
) < 11) {
3450 engine
->irq_enable
= gen8_logical_ring_enable_irq
;
3451 engine
->irq_disable
= gen8_logical_ring_disable_irq
;
3454 * TODO: On Gen11 interrupt masks need to be clear
3455 * to allow C6 entry. Keep interrupts enabled at
3456 * and take the hit of generating extra interrupts
3457 * until a more refined solution exists.
3460 intel_engine_set_irq_handler(engine
, execlists_irq_handler
);
3462 engine
->flags
|= I915_ENGINE_SUPPORTS_STATS
;
3463 if (!intel_vgpu_active(engine
->i915
)) {
3464 engine
->flags
|= I915_ENGINE_HAS_SEMAPHORES
;
3465 if (can_preempt(engine
)) {
3466 engine
->flags
|= I915_ENGINE_HAS_PREEMPTION
;
3467 if (CONFIG_DRM_I915_TIMESLICE_DURATION
)
3468 engine
->flags
|= I915_ENGINE_HAS_TIMESLICES
;
3472 if (GRAPHICS_VER_FULL(engine
->i915
) >= IP_VER(12, 50)) {
3473 if (intel_engine_has_preemption(engine
))
3474 engine
->emit_bb_start
= xehp_emit_bb_start
;
3476 engine
->emit_bb_start
= xehp_emit_bb_start_noarb
;
3478 if (intel_engine_has_preemption(engine
))
3479 engine
->emit_bb_start
= gen8_emit_bb_start
;
3481 engine
->emit_bb_start
= gen8_emit_bb_start_noarb
;
3484 engine
->busyness
= execlists_engine_busyness
;
3487 static void logical_ring_default_irqs(struct intel_engine_cs
*engine
)
3489 unsigned int shift
= 0;
3491 if (GRAPHICS_VER(engine
->i915
) < 11) {
3492 const u8 irq_shifts
[] = {
3493 [RCS0
] = GEN8_RCS_IRQ_SHIFT
,
3494 [BCS0
] = GEN8_BCS_IRQ_SHIFT
,
3495 [VCS0
] = GEN8_VCS0_IRQ_SHIFT
,
3496 [VCS1
] = GEN8_VCS1_IRQ_SHIFT
,
3497 [VECS0
] = GEN8_VECS_IRQ_SHIFT
,
3500 shift
= irq_shifts
[engine
->id
];
3503 engine
->irq_enable_mask
= GT_RENDER_USER_INTERRUPT
<< shift
;
3504 engine
->irq_keep_mask
= GT_CONTEXT_SWITCH_INTERRUPT
<< shift
;
3505 engine
->irq_keep_mask
|= GT_CS_MASTER_ERROR_INTERRUPT
<< shift
;
3506 engine
->irq_keep_mask
|= GT_WAIT_SEMAPHORE_INTERRUPT
<< shift
;
3509 static void rcs_submission_override(struct intel_engine_cs
*engine
)
3511 switch (GRAPHICS_VER(engine
->i915
)) {
3513 engine
->emit_flush
= gen12_emit_flush_rcs
;
3514 engine
->emit_fini_breadcrumb
= gen12_emit_fini_breadcrumb_rcs
;
3517 engine
->emit_flush
= gen11_emit_flush_rcs
;
3518 engine
->emit_fini_breadcrumb
= gen11_emit_fini_breadcrumb_rcs
;
3521 engine
->emit_flush
= gen8_emit_flush_rcs
;
3522 engine
->emit_fini_breadcrumb
= gen8_emit_fini_breadcrumb_rcs
;
3527 int intel_execlists_submission_setup(struct intel_engine_cs
*engine
)
3529 struct intel_engine_execlists
* const execlists
= &engine
->execlists
;
3530 struct drm_i915_private
*i915
= engine
->i915
;
3531 struct intel_uncore
*uncore
= engine
->uncore
;
3532 u32 base
= engine
->mmio_base
;
3534 tasklet_setup(&engine
->sched_engine
->tasklet
, execlists_submission_tasklet
);
3535 timer_setup(&engine
->execlists
.timer
, execlists_timeslice
, 0);
3536 timer_setup(&engine
->execlists
.preempt
, execlists_preempt
, 0);
3538 logical_ring_default_vfuncs(engine
);
3539 logical_ring_default_irqs(engine
);
3541 if (engine
->flags
& I915_ENGINE_HAS_RCS_REG_STATE
)
3542 rcs_submission_override(engine
);
3544 lrc_init_wa_ctx(engine
);
3546 if (HAS_LOGICAL_RING_ELSQ(i915
)) {
3547 execlists
->submit_reg
= uncore
->regs
+
3548 i915_mmio_reg_offset(RING_EXECLIST_SQ_CONTENTS(base
));
3549 execlists
->ctrl_reg
= uncore
->regs
+
3550 i915_mmio_reg_offset(RING_EXECLIST_CONTROL(base
));
3552 engine
->fw_domain
= intel_uncore_forcewake_for_reg(engine
->uncore
,
3553 RING_EXECLIST_CONTROL(engine
->mmio_base
),
3556 execlists
->submit_reg
= uncore
->regs
+
3557 i915_mmio_reg_offset(RING_ELSP(base
));
3560 execlists
->csb_status
=
3561 (u64
*)&engine
->status_page
.addr
[I915_HWS_CSB_BUF0_INDEX
];
3563 execlists
->csb_write
=
3564 &engine
->status_page
.addr
[INTEL_HWS_CSB_WRITE_INDEX(i915
)];
3566 if (GRAPHICS_VER(i915
) < 11)
3567 execlists
->csb_size
= GEN8_CSB_ENTRIES
;
3569 execlists
->csb_size
= GEN11_CSB_ENTRIES
;
3571 engine
->context_tag
= GENMASK(BITS_PER_LONG
- 2, 0);
3572 if (GRAPHICS_VER(engine
->i915
) >= 11 &&
3573 GRAPHICS_VER_FULL(engine
->i915
) < IP_VER(12, 50)) {
3574 execlists
->ccid
|= engine
->instance
<< (GEN11_ENGINE_INSTANCE_SHIFT
- 32);
3575 execlists
->ccid
|= engine
->class << (GEN11_ENGINE_CLASS_SHIFT
- 32);
3578 /* Finally, take ownership and responsibility for cleanup! */
3579 engine
->sanitize
= execlists_sanitize
;
3580 engine
->release
= execlists_release
;
3585 static struct list_head
*virtual_queue(struct virtual_engine
*ve
)
3587 return &ve
->base
.sched_engine
->default_priolist
.requests
;
3590 static void rcu_virtual_context_destroy(struct work_struct
*wrk
)
3592 struct virtual_engine
*ve
=
3593 container_of(wrk
, typeof(*ve
), rcu
.work
);
3596 GEM_BUG_ON(ve
->context
.inflight
);
3598 /* Preempt-to-busy may leave a stale request behind. */
3599 if (unlikely(ve
->request
)) {
3600 struct i915_request
*old
;
3602 spin_lock_irq(&ve
->base
.sched_engine
->lock
);
3604 old
= fetch_and_zero(&ve
->request
);
3606 GEM_BUG_ON(!__i915_request_is_complete(old
));
3607 __i915_request_submit(old
);
3608 i915_request_put(old
);
3611 spin_unlock_irq(&ve
->base
.sched_engine
->lock
);
3615 * Flush the tasklet in case it is still running on another core.
3617 * This needs to be done before we remove ourselves from the siblings'
3618 * rbtrees as in the case it is running in parallel, it may reinsert
3619 * the rb_node into a sibling.
3621 tasklet_kill(&ve
->base
.sched_engine
->tasklet
);
3623 /* Decouple ourselves from the siblings, no more access allowed. */
3624 for (n
= 0; n
< ve
->num_siblings
; n
++) {
3625 struct intel_engine_cs
*sibling
= ve
->siblings
[n
];
3626 struct rb_node
*node
= &ve
->nodes
[sibling
->id
].rb
;
3628 if (RB_EMPTY_NODE(node
))
3631 spin_lock_irq(&sibling
->sched_engine
->lock
);
3633 /* Detachment is lazily performed in the sched_engine->tasklet */
3634 if (!RB_EMPTY_NODE(node
))
3635 rb_erase_cached(node
, &sibling
->execlists
.virtual);
3637 spin_unlock_irq(&sibling
->sched_engine
->lock
);
3639 GEM_BUG_ON(__tasklet_is_scheduled(&ve
->base
.sched_engine
->tasklet
));
3640 GEM_BUG_ON(!list_empty(virtual_queue(ve
)));
3642 lrc_fini(&ve
->context
);
3643 intel_context_fini(&ve
->context
);
3645 if (ve
->base
.breadcrumbs
)
3646 intel_breadcrumbs_put(ve
->base
.breadcrumbs
);
3647 if (ve
->base
.sched_engine
)
3648 i915_sched_engine_put(ve
->base
.sched_engine
);
3649 intel_engine_free_request_pool(&ve
->base
);
3654 static void virtual_context_destroy(struct kref
*kref
)
3656 struct virtual_engine
*ve
=
3657 container_of(kref
, typeof(*ve
), context
.ref
);
3659 GEM_BUG_ON(!list_empty(&ve
->context
.signals
));
3662 * When destroying the virtual engine, we have to be aware that
3663 * it may still be in use from an hardirq/softirq context causing
3664 * the resubmission of a completed request (background completion
3665 * due to preempt-to-busy). Before we can free the engine, we need
3666 * to flush the submission code and tasklets that are still potentially
3667 * accessing the engine. Flushing the tasklets requires process context,
3668 * and since we can guard the resubmit onto the engine with an RCU read
3669 * lock, we can delegate the free of the engine to an RCU worker.
3671 INIT_RCU_WORK(&ve
->rcu
, rcu_virtual_context_destroy
);
3672 queue_rcu_work(system_wq
, &ve
->rcu
);
3675 static void virtual_engine_initial_hint(struct virtual_engine
*ve
)
3680 * Pick a random sibling on starting to help spread the load around.
3682 * New contexts are typically created with exactly the same order
3683 * of siblings, and often started in batches. Due to the way we iterate
3684 * the array of sibling when submitting requests, sibling[0] is
3685 * prioritised for dequeuing. If we make sure that sibling[0] is fairly
3686 * randomised across the system, we also help spread the load by the
3687 * first engine we inspect being different each time.
3689 * NB This does not force us to execute on this engine, it will just
3690 * typically be the first we inspect for submission.
3692 swp
= prandom_u32_max(ve
->num_siblings
);
3694 swap(ve
->siblings
[swp
], ve
->siblings
[0]);
3697 static int virtual_context_alloc(struct intel_context
*ce
)
3699 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
3701 return lrc_alloc(ce
, ve
->siblings
[0]);
3704 static int virtual_context_pre_pin(struct intel_context
*ce
,
3705 struct i915_gem_ww_ctx
*ww
,
3708 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
3710 /* Note: we must use a real engine class for setting up reg state */
3711 return __execlists_context_pre_pin(ce
, ve
->siblings
[0], ww
, vaddr
);
3714 static int virtual_context_pin(struct intel_context
*ce
, void *vaddr
)
3716 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
3718 return lrc_pin(ce
, ve
->siblings
[0], vaddr
);
3721 static void virtual_context_enter(struct intel_context
*ce
)
3723 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
3726 for (n
= 0; n
< ve
->num_siblings
; n
++)
3727 intel_engine_pm_get(ve
->siblings
[n
]);
3729 intel_timeline_enter(ce
->timeline
);
3732 static void virtual_context_exit(struct intel_context
*ce
)
3734 struct virtual_engine
*ve
= container_of(ce
, typeof(*ve
), context
);
3737 intel_timeline_exit(ce
->timeline
);
3739 for (n
= 0; n
< ve
->num_siblings
; n
++)
3740 intel_engine_pm_put(ve
->siblings
[n
]);
3743 static struct intel_engine_cs
*
3744 virtual_get_sibling(struct intel_engine_cs
*engine
, unsigned int sibling
)
3746 struct virtual_engine
*ve
= to_virtual_engine(engine
);
3748 if (sibling
>= ve
->num_siblings
)
3751 return ve
->siblings
[sibling
];
3754 static const struct intel_context_ops virtual_context_ops
= {
3755 .flags
= COPS_HAS_INFLIGHT
| COPS_RUNTIME_CYCLES
,
3757 .alloc
= virtual_context_alloc
,
3759 .cancel_request
= execlists_context_cancel_request
,
3761 .pre_pin
= virtual_context_pre_pin
,
3762 .pin
= virtual_context_pin
,
3764 .post_unpin
= lrc_post_unpin
,
3766 .enter
= virtual_context_enter
,
3767 .exit
= virtual_context_exit
,
3769 .destroy
= virtual_context_destroy
,
3771 .get_sibling
= virtual_get_sibling
,
3774 static intel_engine_mask_t
virtual_submission_mask(struct virtual_engine
*ve
)
3776 struct i915_request
*rq
;
3777 intel_engine_mask_t mask
;
3779 rq
= READ_ONCE(ve
->request
);
3783 /* The rq is ready for submission; rq->execution_mask is now stable. */
3784 mask
= rq
->execution_mask
;
3785 if (unlikely(!mask
)) {
3786 /* Invalid selection, submit to a random engine in error */
3787 i915_request_set_error_once(rq
, -ENODEV
);
3788 mask
= ve
->siblings
[0]->mask
;
3791 ENGINE_TRACE(&ve
->base
, "rq=%llx:%lld, mask=%x, prio=%d\n",
3792 rq
->fence
.context
, rq
->fence
.seqno
,
3793 mask
, ve
->base
.sched_engine
->queue_priority_hint
);
3798 static void virtual_submission_tasklet(struct tasklet_struct
*t
)
3800 struct i915_sched_engine
*sched_engine
=
3801 from_tasklet(sched_engine
, t
, tasklet
);
3802 struct virtual_engine
* const ve
=
3803 (struct virtual_engine
*)sched_engine
->private_data
;
3804 const int prio
= READ_ONCE(sched_engine
->queue_priority_hint
);
3805 intel_engine_mask_t mask
;
3809 mask
= virtual_submission_mask(ve
);
3811 if (unlikely(!mask
))
3814 for (n
= 0; n
< ve
->num_siblings
; n
++) {
3815 struct intel_engine_cs
*sibling
= READ_ONCE(ve
->siblings
[n
]);
3816 struct ve_node
* const node
= &ve
->nodes
[sibling
->id
];
3817 struct rb_node
**parent
, *rb
;
3820 if (!READ_ONCE(ve
->request
))
3821 break; /* already handled by a sibling's tasklet */
3823 spin_lock_irq(&sibling
->sched_engine
->lock
);
3825 if (unlikely(!(mask
& sibling
->mask
))) {
3826 if (!RB_EMPTY_NODE(&node
->rb
)) {
3827 rb_erase_cached(&node
->rb
,
3828 &sibling
->execlists
.virtual);
3829 RB_CLEAR_NODE(&node
->rb
);
3835 if (unlikely(!RB_EMPTY_NODE(&node
->rb
))) {
3837 * Cheat and avoid rebalancing the tree if we can
3838 * reuse this node in situ.
3840 first
= rb_first_cached(&sibling
->execlists
.virtual) ==
3842 if (prio
== node
->prio
|| (prio
> node
->prio
&& first
))
3845 rb_erase_cached(&node
->rb
, &sibling
->execlists
.virtual);
3850 parent
= &sibling
->execlists
.virtual.rb_root
.rb_node
;
3852 struct ve_node
*other
;
3855 other
= rb_entry(rb
, typeof(*other
), rb
);
3856 if (prio
> other
->prio
) {
3857 parent
= &rb
->rb_left
;
3859 parent
= &rb
->rb_right
;
3864 rb_link_node(&node
->rb
, rb
, parent
);
3865 rb_insert_color_cached(&node
->rb
,
3866 &sibling
->execlists
.virtual,
3870 GEM_BUG_ON(RB_EMPTY_NODE(&node
->rb
));
3872 if (first
&& prio
> sibling
->sched_engine
->queue_priority_hint
)
3873 tasklet_hi_schedule(&sibling
->sched_engine
->tasklet
);
3876 spin_unlock_irq(&sibling
->sched_engine
->lock
);
3878 if (intel_context_inflight(&ve
->context
))
3883 static void virtual_submit_request(struct i915_request
*rq
)
3885 struct virtual_engine
*ve
= to_virtual_engine(rq
->engine
);
3886 unsigned long flags
;
3888 ENGINE_TRACE(&ve
->base
, "rq=%llx:%lld\n",
3892 GEM_BUG_ON(ve
->base
.submit_request
!= virtual_submit_request
);
3894 spin_lock_irqsave(&ve
->base
.sched_engine
->lock
, flags
);
3896 /* By the time we resubmit a request, it may be completed */
3897 if (__i915_request_is_complete(rq
)) {
3898 __i915_request_submit(rq
);
3902 if (ve
->request
) { /* background completion from preempt-to-busy */
3903 GEM_BUG_ON(!__i915_request_is_complete(ve
->request
));
3904 __i915_request_submit(ve
->request
);
3905 i915_request_put(ve
->request
);
3908 ve
->base
.sched_engine
->queue_priority_hint
= rq_prio(rq
);
3909 ve
->request
= i915_request_get(rq
);
3911 GEM_BUG_ON(!list_empty(virtual_queue(ve
)));
3912 list_move_tail(&rq
->sched
.link
, virtual_queue(ve
));
3914 tasklet_hi_schedule(&ve
->base
.sched_engine
->tasklet
);
3917 spin_unlock_irqrestore(&ve
->base
.sched_engine
->lock
, flags
);
3920 static struct intel_context
*
3921 execlists_create_virtual(struct intel_engine_cs
**siblings
, unsigned int count
,
3922 unsigned long flags
)
3924 struct virtual_engine
*ve
;
3928 ve
= kzalloc(struct_size(ve
, siblings
, count
), GFP_KERNEL
);
3930 return ERR_PTR(-ENOMEM
);
3932 ve
->base
.i915
= siblings
[0]->i915
;
3933 ve
->base
.gt
= siblings
[0]->gt
;
3934 ve
->base
.uncore
= siblings
[0]->uncore
;
3937 ve
->base
.class = OTHER_CLASS
;
3938 ve
->base
.uabi_class
= I915_ENGINE_CLASS_INVALID
;
3939 ve
->base
.instance
= I915_ENGINE_CLASS_INVALID_VIRTUAL
;
3940 ve
->base
.uabi_instance
= I915_ENGINE_CLASS_INVALID_VIRTUAL
;
3943 * The decision on whether to submit a request using semaphores
3944 * depends on the saturated state of the engine. We only compute
3945 * this during HW submission of the request, and we need for this
3946 * state to be globally applied to all requests being submitted
3947 * to this engine. Virtual engines encompass more than one physical
3948 * engine and so we cannot accurately tell in advance if one of those
3949 * engines is already saturated and so cannot afford to use a semaphore
3950 * and be pessimized in priority for doing so -- if we are the only
3951 * context using semaphores after all other clients have stopped, we
3952 * will be starved on the saturated system. Such a global switch for
3953 * semaphores is less than ideal, but alas is the current compromise.
3955 ve
->base
.saturated
= ALL_ENGINES
;
3957 snprintf(ve
->base
.name
, sizeof(ve
->base
.name
), "virtual");
3959 intel_engine_init_execlists(&ve
->base
);
3961 ve
->base
.sched_engine
= i915_sched_engine_create(ENGINE_VIRTUAL
);
3962 if (!ve
->base
.sched_engine
) {
3966 ve
->base
.sched_engine
->private_data
= &ve
->base
;
3968 ve
->base
.cops
= &virtual_context_ops
;
3969 ve
->base
.request_alloc
= execlists_request_alloc
;
3971 ve
->base
.sched_engine
->schedule
= i915_schedule
;
3972 ve
->base
.sched_engine
->kick_backend
= kick_execlists
;
3973 ve
->base
.submit_request
= virtual_submit_request
;
3975 INIT_LIST_HEAD(virtual_queue(ve
));
3976 tasklet_setup(&ve
->base
.sched_engine
->tasklet
, virtual_submission_tasklet
);
3978 intel_context_init(&ve
->context
, &ve
->base
);
3980 ve
->base
.breadcrumbs
= intel_breadcrumbs_create(NULL
);
3981 if (!ve
->base
.breadcrumbs
) {
3986 for (n
= 0; n
< count
; n
++) {
3987 struct intel_engine_cs
*sibling
= siblings
[n
];
3989 GEM_BUG_ON(!is_power_of_2(sibling
->mask
));
3990 if (sibling
->mask
& ve
->base
.mask
) {
3991 DRM_DEBUG("duplicate %s entry in load balancer\n",
3998 * The virtual engine implementation is tightly coupled to
3999 * the execlists backend -- we push out request directly
4000 * into a tree inside each physical engine. We could support
4001 * layering if we handle cloning of the requests and
4002 * submitting a copy into each backend.
4004 if (sibling
->sched_engine
->tasklet
.callback
!=
4005 execlists_submission_tasklet
) {
4010 GEM_BUG_ON(RB_EMPTY_NODE(&ve
->nodes
[sibling
->id
].rb
));
4011 RB_CLEAR_NODE(&ve
->nodes
[sibling
->id
].rb
);
4013 ve
->siblings
[ve
->num_siblings
++] = sibling
;
4014 ve
->base
.mask
|= sibling
->mask
;
4015 ve
->base
.logical_mask
|= sibling
->logical_mask
;
4018 * All physical engines must be compatible for their emission
4019 * functions (as we build the instructions during request
4020 * construction and do not alter them before submission
4021 * on the physical engine). We use the engine class as a guide
4022 * here, although that could be refined.
4024 if (ve
->base
.class != OTHER_CLASS
) {
4025 if (ve
->base
.class != sibling
->class) {
4026 DRM_DEBUG("invalid mixing of engine class, sibling %d, already %d\n",
4027 sibling
->class, ve
->base
.class);
4034 ve
->base
.class = sibling
->class;
4035 ve
->base
.uabi_class
= sibling
->uabi_class
;
4036 snprintf(ve
->base
.name
, sizeof(ve
->base
.name
),
4037 "v%dx%d", ve
->base
.class, count
);
4038 ve
->base
.context_size
= sibling
->context_size
;
4040 ve
->base
.add_active_request
= sibling
->add_active_request
;
4041 ve
->base
.remove_active_request
= sibling
->remove_active_request
;
4042 ve
->base
.emit_bb_start
= sibling
->emit_bb_start
;
4043 ve
->base
.emit_flush
= sibling
->emit_flush
;
4044 ve
->base
.emit_init_breadcrumb
= sibling
->emit_init_breadcrumb
;
4045 ve
->base
.emit_fini_breadcrumb
= sibling
->emit_fini_breadcrumb
;
4046 ve
->base
.emit_fini_breadcrumb_dw
=
4047 sibling
->emit_fini_breadcrumb_dw
;
4049 ve
->base
.flags
= sibling
->flags
;
4052 ve
->base
.flags
|= I915_ENGINE_IS_VIRTUAL
;
4054 virtual_engine_initial_hint(ve
);
4055 return &ve
->context
;
4058 intel_context_put(&ve
->context
);
4059 return ERR_PTR(err
);
4062 void intel_execlists_show_requests(struct intel_engine_cs
*engine
,
4063 struct drm_printer
*m
,
4064 void (*show_request
)(struct drm_printer
*m
,
4065 const struct i915_request
*rq
,
4070 const struct intel_engine_execlists
*execlists
= &engine
->execlists
;
4071 struct i915_sched_engine
*sched_engine
= engine
->sched_engine
;
4072 struct i915_request
*rq
, *last
;
4073 unsigned long flags
;
4077 spin_lock_irqsave(&sched_engine
->lock
, flags
);
4081 list_for_each_entry(rq
, &sched_engine
->requests
, sched
.link
) {
4082 if (count
++ < max
- 1)
4083 show_request(m
, rq
, "\t\t", 0);
4090 "\t\t...skipping %d executing requests...\n",
4093 show_request(m
, last
, "\t\t", 0);
4096 if (sched_engine
->queue_priority_hint
!= INT_MIN
)
4097 drm_printf(m
, "\t\tQueue priority hint: %d\n",
4098 READ_ONCE(sched_engine
->queue_priority_hint
));
4102 for (rb
= rb_first_cached(&sched_engine
->queue
); rb
; rb
= rb_next(rb
)) {
4103 struct i915_priolist
*p
= rb_entry(rb
, typeof(*p
), node
);
4105 priolist_for_each_request(rq
, p
) {
4106 if (count
++ < max
- 1)
4107 show_request(m
, rq
, "\t\t", 0);
4115 "\t\t...skipping %d queued requests...\n",
4118 show_request(m
, last
, "\t\t", 0);
4123 for (rb
= rb_first_cached(&execlists
->virtual); rb
; rb
= rb_next(rb
)) {
4124 struct virtual_engine
*ve
=
4125 rb_entry(rb
, typeof(*ve
), nodes
[engine
->id
].rb
);
4126 struct i915_request
*rq
= READ_ONCE(ve
->request
);
4129 if (count
++ < max
- 1)
4130 show_request(m
, rq
, "\t\t", 0);
4138 "\t\t...skipping %d virtual requests...\n",
4141 show_request(m
, last
, "\t\t", 0);
4144 spin_unlock_irqrestore(&sched_engine
->lock
, flags
);
4147 #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
4148 #include "selftest_execlists.c"