rename CFG_ macros to CONFIG_SYS

[people/ms/u-boot.git] / drivers / net / smc91111.c

/*------------------------------------------------------------------------
 . smc91111.c
 . This is a driver for SMSC's 91C111 single-chip Ethernet device.
 .
 . (C) Copyright 2002
 . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 . Rolf Offermanns <rof@sysgo.de>
 .
 . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
 .       Developed by Simple Network Magic Corporation (SNMC)
 . Copyright (C) 1996 by Erik Stahlman (ES)
 .
 . This program is free software; you can redistribute it and/or modify
 . it under the terms of the GNU General Public License as published by
 . the Free Software Foundation; either version 2 of the License, or
 . (at your option) any later version.
 .
 . This program is distributed in the hope that it will be useful,
 . but WITHOUT ANY WARRANTY; without even the implied warranty of
 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 . GNU General Public License for more details.
 .
 . You should have received a copy of the GNU General Public License
 . along with this program; if not, write to the Free Software
 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 .
 . Information contained in this file was obtained from the LAN91C111
 . manual from SMC.  To get a copy, if you really want one, you can find
 . information under www.smsc.com.
 .
 .
 . "Features" of the SMC chip:
 .   Integrated PHY/MAC for 10/100BaseT Operation
 .   Supports internal and external MII
 .   Integrated 8K packet memory
 .   EEPROM interface for configuration
 .
 . Arguments:
 .      io      = for the base address
 .      irq     = for the IRQ
 .
 . author:
 .      Erik Stahlman                           ( erik@vt.edu )
 .      Daris A Nevil                           ( dnevil@snmc.com )
 .
 .
 . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
 .
 . Sources:
 .    o   SMSC LAN91C111 databook (www.smsc.com)
 .    o   smc9194.c by Erik Stahlman
 .    o   skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
 .
 . History:
 .      06/19/03  Richard Woodruff Made u-boot environment aware and added mac addr checks.
 .      10/17/01  Marco Hasewinkel Modify for DNP/1110
 .      07/25/01  Woojung Huh      Modify for ADS Bitsy
 .      04/25/01  Daris A Nevil    Initial public release through SMSC
 .      03/16/01  Daris A Nevil    Modified smc9194.c for use with LAN91C111
 ----------------------------------------------------------------------------*/

#include <common.h>
#include <command.h>
#include <config.h>
#include "smc91111.h"
#include <net.h>

/* Use power-down feature of the chip */
#define POWER_DOWN      0

#define NO_AUTOPROBE

#define SMC_DEBUG 0

#if SMC_DEBUG > 1
static const char version[] =
        "smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
#endif

/* Autonegotiation timeout in seconds */
#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
#define CONFIG_SMC_AUTONEG_TIMEOUT 10
#endif

/*------------------------------------------------------------------------
 .
 . Configuration options, for the experienced user to change.
 .
 -------------------------------------------------------------------------*/

/*
 . Wait time for memory to be free.  This probably shouldn't be
 . tuned that much, as waiting for this means nothing else happens
 . in the system
*/
#define MEMORY_WAIT_TIME 16


#if (SMC_DEBUG > 2 )
#define PRINTK3(args...) printf(args)
#else
#define PRINTK3(args...)
#endif

#if SMC_DEBUG > 1
#define PRINTK2(args...) printf(args)
#else
#define PRINTK2(args...)
#endif

#ifdef SMC_DEBUG
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif


/*------------------------------------------------------------------------
 .
 . The internal workings of the driver.  If you are changing anything
 . here with the SMC stuff, you should have the datasheet and know
 . what you are doing.
 .
 -------------------------------------------------------------------------*/
#define CARDNAME "LAN91C111"

/* Memory sizing constant */
#define LAN91C111_MEMORY_MULTIPLIER     (1024*2)

#ifndef CONFIG_SMC91111_BASE
#define CONFIG_SMC91111_BASE 0x20000300
#endif

#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE

#define SMC_DEV_NAME "SMC91111"
#define SMC_PHY_ADDR 0x0000
#define SMC_ALLOC_MAX_TRY 5
#define SMC_TX_TIMEOUT 30

#define SMC_PHY_CLOCK_DELAY 1000

#define ETH_ZLEN 60

#ifdef  CONFIG_SMC_USE_32_BIT
#define USE_32_BIT  1
#else
#undef USE_32_BIT
#endif
/*-----------------------------------------------------------------
 .
 .  The driver can be entered at any of the following entry points.
 .
 .------------------------------------------------------------------  */

extern int eth_init(bd_t *bd);
extern void eth_halt(void);
extern int eth_rx(void);
extern int eth_send(volatile void *packet, int length);

#ifdef SHARED_RESOURCES
        extern void swap_to(int device_id);
#endif

/*
 . This is called by  register_netdev().  It is responsible for
 . checking the portlist for the SMC9000 series chipset.  If it finds
 . one, then it will initialize the device, find the hardware information,
 . and sets up the appropriate device parameters.
 . NOTE: Interrupts are *OFF* when this procedure is called.
 .
 . NB:This shouldn't be static since it is referred to externally.
*/
int smc_init(void);

/*
 . This is called by  unregister_netdev().  It is responsible for
 . cleaning up before the driver is finally unregistered and discarded.
*/
void smc_destructor(void);

/*
 . The kernel calls this function when someone wants to use the device,
 . typically 'ifconfig ethX up'.
*/
static int smc_open(bd_t *bd);


/*
 . This is called by the kernel in response to 'ifconfig ethX down'.  It
 . is responsible for cleaning up everything that the open routine
 . does, and maybe putting the card into a powerdown state.
*/
static int smc_close(void);

/*
 . Configures the PHY through the MII Management interface
*/
#ifndef CONFIG_SMC91111_EXT_PHY
static void smc_phy_configure(void);
#endif /* !CONFIG_SMC91111_EXT_PHY */

/*
 . This is a separate procedure to handle the receipt of a packet, to
 . leave the interrupt code looking slightly cleaner
*/
static int smc_rcv(void);

/* See if a MAC address is defined in the current environment. If so use it. If not
 . print a warning and set the environment and other globals with the default.
 . If an EEPROM is present it really should be consulted.
*/
int smc_get_ethaddr(bd_t *bd);
int get_rom_mac(uchar *v_rom_mac);

/*
 ------------------------------------------------------------
 .
 . Internal routines
 .
 ------------------------------------------------------------
*/

#ifdef CONFIG_SMC_USE_IOFUNCS
/*
 * input and output functions
 *
 * Implemented due to inx,outx macros accessing the device improperly
 * and putting the device into an unkown state.
 *
 * For instance, on Sharp LPD7A400 SDK, affects were chip memory
 * could not be free'd (hence the alloc failures), duplicate packets,
 * packets being corrupt (shifted) on the wire, etc.  Switching to the
 * inx,outx functions fixed this problem.
 */
static inline word SMC_inw(dword offset);
static inline void SMC_outw(word value, dword offset);
static inline byte SMC_inb(dword offset);
static inline void SMC_outb(byte value, dword offset);
static inline void SMC_insw(dword offset, volatile uchar* buf, dword len);
static inline void SMC_outsw(dword offset, uchar* buf, dword len);

#define barrier() __asm__ __volatile__("": : :"memory")

static inline word SMC_inw(dword offset)
{
        word v;
        v = *((volatile word*)(SMC_BASE_ADDRESS+offset));
        barrier(); *(volatile u32*)(0xc0000000);
        return v;
}

static inline void SMC_outw(word value, dword offset)
{
        *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value;
        barrier(); *(volatile u32*)(0xc0000000);
}

static inline byte SMC_inb(dword offset)
{
        word  _w;

        _w = SMC_inw(offset & ~((dword)1));
        return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
}

static inline void SMC_outb(byte value, dword offset)
{
        word  _w;

        _w = SMC_inw(offset & ~((dword)1));
        if (offset & 1)
                        *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff);
        else
                        *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00);
}

static inline void SMC_insw(dword offset, volatile uchar* buf, dword len)
{
        volatile word *p = (volatile word *)buf;

        while (len-- > 0) {
                *p++ = SMC_inw(offset);
                barrier();
                *((volatile u32*)(0xc0000000));
        }
}

static inline void SMC_outsw(dword offset, uchar* buf, dword len)
{
        volatile word *p = (volatile word *)buf;

        while (len-- > 0) {
                SMC_outw(*p++, offset);
                barrier();
                *(volatile u32*)(0xc0000000);
        }
}
#endif  /* CONFIG_SMC_USE_IOFUNCS */

static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};

/*
 * This function must be called before smc_open() if you want to override
 * the default mac address.
 */

void smc_set_mac_addr(const unsigned char *addr) {
        int i;

        for (i=0; i < sizeof(smc_mac_addr); i++){
                smc_mac_addr[i] = addr[i];
        }
}

/*
 * smc_get_macaddr is no longer used. If you want to override the default
 * mac address, call smc_get_mac_addr as a part of the board initialization.
 */

#if 0
void smc_get_macaddr( byte *addr ) {
        /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
        unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
        int i;


        for (i=0; i<6; i++) {
            addr[0] = *(dnp1110_mac+0);
            addr[1] = *(dnp1110_mac+1);
            addr[2] = *(dnp1110_mac+2);
            addr[3] = *(dnp1110_mac+3);
            addr[4] = *(dnp1110_mac+4);
            addr[5] = *(dnp1110_mac+5);
        }
}
#endif /* 0 */

/***********************************************
 * Show available memory                       *
 ***********************************************/
void dump_memory_info(void)
{
        word mem_info;
        word old_bank;

        old_bank = SMC_inw(BANK_SELECT)&0xF;

        SMC_SELECT_BANK(0);
        mem_info = SMC_inw( MIR_REG );
        PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);

        SMC_SELECT_BANK(old_bank);
}
/*
 . A rather simple routine to print out a packet for debugging purposes.
*/
#if SMC_DEBUG > 2
static void print_packet( byte *, int );
#endif

#define tx_done(dev) 1


/* this does a soft reset on the device */
static void smc_reset( void );

/* Enable Interrupts, Receive, and Transmit */
static void smc_enable( void );

/* this puts the device in an inactive state */
static void smc_shutdown( void );

/* Routines to Read and Write the PHY Registers across the
   MII Management Interface
*/

#ifndef CONFIG_SMC91111_EXT_PHY
static word smc_read_phy_register(byte phyreg);
static void smc_write_phy_register(byte phyreg, word phydata);
#endif /* !CONFIG_SMC91111_EXT_PHY */


static int poll4int (byte mask, int timeout)
{
        int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
        int is_timeout = 0;
        word old_bank = SMC_inw (BSR_REG);

        PRINTK2 ("Polling...\n");
        SMC_SELECT_BANK (2);
        while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) {
                if (get_timer (0) >= tmo) {
                        is_timeout = 1;
                        break;
                }
        }

        /* restore old bank selection */
        SMC_SELECT_BANK (old_bank);

        if (is_timeout)
                return 1;
        else
                return 0;
}

/* Only one release command at a time, please */
static inline void smc_wait_mmu_release_complete (void)
{
        int count = 0;

        /* assume bank 2 selected */
        while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
                udelay (1);     /* Wait until not busy */
                if (++count > 200)
                        break;
        }
}

/*
 . Function: smc_reset( void )
 . Purpose:
 .      This sets the SMC91111 chip to its normal state, hopefully from whatever
 .      mess that any other DOS driver has put it in.
 .
 . Maybe I should reset more registers to defaults in here?  SOFTRST  should
 . do that for me.
 .
 . Method:
 .      1.  send a SOFT RESET
 .      2.  wait for it to finish
 .      3.  enable autorelease mode
 .      4.  reset the memory management unit
 .      5.  clear all interrupts
 .
*/
static void smc_reset (void)
{
        PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);

        /* This resets the registers mostly to defaults, but doesn't
           affect EEPROM.  That seems unnecessary */
        SMC_SELECT_BANK (0);
        SMC_outw (RCR_SOFTRST, RCR_REG);

        /* Setup the Configuration Register */
        /* This is necessary because the CONFIG_REG is not affected */
        /* by a soft reset */

        SMC_SELECT_BANK (1);
#if defined(CONFIG_SMC91111_EXT_PHY)
        SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
#else
        SMC_outw (CONFIG_DEFAULT, CONFIG_REG);
#endif


        /* Release from possible power-down state */
        /* Configuration register is not affected by Soft Reset */
        SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG);

        SMC_SELECT_BANK (0);

        /* this should pause enough for the chip to be happy */
        udelay (10);

        /* Disable transmit and receive functionality */
        SMC_outw (RCR_CLEAR, RCR_REG);
        SMC_outw (TCR_CLEAR, TCR_REG);

        /* set the control register */
        SMC_SELECT_BANK (1);
        SMC_outw (CTL_DEFAULT, CTL_REG);

        /* Reset the MMU */
        SMC_SELECT_BANK (2);
        smc_wait_mmu_release_complete ();
        SMC_outw (MC_RESET, MMU_CMD_REG);
        while (SMC_inw (MMU_CMD_REG) & MC_BUSY)
                udelay (1);     /* Wait until not busy */

        /* Note:  It doesn't seem that waiting for the MMU busy is needed here,
           but this is a place where future chipsets _COULD_ break.  Be wary
           of issuing another MMU command right after this */

        /* Disable all interrupts */
        SMC_outb (0, IM_REG);
}

/*
 . Function: smc_enable
 . Purpose: let the chip talk to the outside work
 . Method:
 .      1.  Enable the transmitter
 .      2.  Enable the receiver
 .      3.  Enable interrupts
*/
static void smc_enable()
{
        PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
        SMC_SELECT_BANK( 0 );
        /* see the header file for options in TCR/RCR DEFAULT*/
        SMC_outw( TCR_DEFAULT, TCR_REG );
        SMC_outw( RCR_DEFAULT, RCR_REG );

        /* clear MII_DIS */
/*      smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
}

/*
 . Function: smc_shutdown
 . Purpose:  closes down the SMC91xxx chip.
 . Method:
 .      1. zero the interrupt mask
 .      2. clear the enable receive flag
 .      3. clear the enable xmit flags
 .
 . TODO:
 .   (1) maybe utilize power down mode.
 .      Why not yet?  Because while the chip will go into power down mode,
 .      the manual says that it will wake up in response to any I/O requests
 .      in the register space.   Empirical results do not show this working.
*/
static void smc_shutdown()
{
        PRINTK2(CARDNAME ": smc_shutdown\n");

        /* no more interrupts for me */
        SMC_SELECT_BANK( 2 );
        SMC_outb( 0, IM_REG );

        /* and tell the card to stay away from that nasty outside world */
        SMC_SELECT_BANK( 0 );
        SMC_outb( RCR_CLEAR, RCR_REG );
        SMC_outb( TCR_CLEAR, TCR_REG );
#ifdef SHARED_RESOURCES
        swap_to(FLASH);
#endif
}


/*
 . Function:  smc_hardware_send_packet(struct net_device * )
 . Purpose:
 .      This sends the actual packet to the SMC9xxx chip.
 .
 . Algorithm:
 .      First, see if a saved_skb is available.
 .              ( this should NOT be called if there is no 'saved_skb'
 .      Now, find the packet number that the chip allocated
 .      Point the data pointers at it in memory
 .      Set the length word in the chip's memory
 .      Dump the packet to chip memory
 .      Check if a last byte is needed ( odd length packet )
 .              if so, set the control flag right
 .      Tell the card to send it
 .      Enable the transmit interrupt, so I know if it failed
 .      Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
        byte packet_no;
        unsigned long ioaddr;
        byte *buf;
        int length;
        int numPages;
        int try = 0;
        int time_out;
        byte status;
        byte saved_pnr;
        word saved_ptr;

        /* save PTR and PNR registers before manipulation */
        SMC_SELECT_BANK (2);
        saved_pnr = SMC_inb( PN_REG );
        saved_ptr = SMC_inw( PTR_REG );

        PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);

        length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;

        /* allocate memory
         ** The MMU wants the number of pages to be the number of 256 bytes
         ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
         **
         ** The 91C111 ignores the size bits, but the code is left intact
         ** for backwards and future compatibility.
         **
         ** Pkt size for allocating is data length +6 (for additional status
         ** words, length and ctl!)
         **
         ** If odd size then last byte is included in this header.
         */
        numPages = ((length & 0xfffe) + 6);
        numPages >>= 8;         /* Divide by 256 */

        if (numPages > 7) {
                printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
                return 0;
        }

        /* now, try to allocate the memory */
        SMC_SELECT_BANK (2);
        SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG);

        /* FIXME: the ALLOC_INT bit never gets set *
         * so the following will always give a     *
         * memory allocation error.                *
         * same code works in armboot though       *
         * -ro
         */

again:
        try++;
        time_out = MEMORY_WAIT_TIME;
        do {
                status = SMC_inb (SMC91111_INT_REG);
                if (status & IM_ALLOC_INT) {
                        /* acknowledge the interrupt */
                        SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG);
                        break;
                }
        } while (--time_out);

        if (!time_out) {
                PRINTK2 ("%s: memory allocation, try %d failed ...\n",
                         SMC_DEV_NAME, try);
                if (try < SMC_ALLOC_MAX_TRY)
                        goto again;
                else
                        return 0;
        }

        PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
                 SMC_DEV_NAME, try);

        /* I can send the packet now.. */

        ioaddr = SMC_BASE_ADDRESS;

        buf = (byte *) packet;

        /* If I get here, I _know_ there is a packet slot waiting for me */
        packet_no = SMC_inb (AR_REG);
        if (packet_no & AR_FAILED) {
                /* or isn't there?  BAD CHIP! */
                printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
                return 0;
        }

        /* we have a packet address, so tell the card to use it */
#ifndef CONFIG_XAENIAX
        SMC_outb (packet_no, PN_REG);
#else
        /* On Xaeniax board, we can't use SMC_outb here because that way
         * the Allocate MMU command will end up written to the command register
         * as well, which will lead to a problem.
         */
        SMC_outl (packet_no << 16, 0);
#endif
        /* do not write new ptr value if Write data fifo not empty */
        while ( saved_ptr & PTR_NOTEMPTY )
                printf ("Write data fifo not empty!\n");

        /* point to the beginning of the packet */
        SMC_outw (PTR_AUTOINC, PTR_REG);

        PRINTK3 ("%s: Trying to xmit packet of length %x\n",
                 SMC_DEV_NAME, length);

#if SMC_DEBUG > 2
        printf ("Transmitting Packet\n");
        print_packet (buf, length);
#endif

        /* send the packet length ( +6 for status, length and ctl byte )
           and the status word ( set to zeros ) */
#ifdef USE_32_BIT
        SMC_outl ((length + 6) << 16, SMC91111_DATA_REG);
#else
        SMC_outw (0, SMC91111_DATA_REG);
        /* send the packet length ( +6 for status words, length, and ctl */
        SMC_outw ((length + 6), SMC91111_DATA_REG);
#endif

        /* send the actual data
           . I _think_ it's faster to send the longs first, and then
           . mop up by sending the last word.  It depends heavily
           . on alignment, at least on the 486.  Maybe it would be
           . a good idea to check which is optimal?  But that could take
           . almost as much time as is saved?
         */
#ifdef USE_32_BIT
        SMC_outsl (SMC91111_DATA_REG, buf, length >> 2);
#ifndef CONFIG_XAENIAX
        if (length & 0x2)
                SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
                          SMC91111_DATA_REG);
#else
        /* On XANEIAX, we can only use 32-bit writes, so we need to handle
         * unaligned tail part specially. The standard code doesn't work.
         */
        if ((length & 3) == 3) {
                u16 * ptr = (u16*) &buf[length-3];
                SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16),
                                SMC91111_DATA_REG);
        } else if ((length & 2) == 2) {
                u16 * ptr = (u16*) &buf[length-2];
                SMC_outl(*ptr, SMC91111_DATA_REG);
        } else if (length & 1) {
                SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG);
        } else {
                SMC_outl(0, SMC91111_DATA_REG);
        }
#endif
#else
        SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1);
#endif /* USE_32_BIT */

#ifndef CONFIG_XAENIAX
        /* Send the last byte, if there is one.   */
        if ((length & 1) == 0) {
                SMC_outw (0, SMC91111_DATA_REG);
        } else {
                SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG);
        }
#endif

        /* and let the chipset deal with it */
        SMC_outw (MC_ENQUEUE, MMU_CMD_REG);

        /* poll for TX INT */
        /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */
        /* poll for TX_EMPTY INT - autorelease enabled */
        if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
                /* sending failed */
                PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);

                /* release packet */
                /* no need to release, MMU does that now */
#ifdef CONFIG_XAENIAX
                 SMC_outw (MC_FREEPKT, MMU_CMD_REG);
#endif

                /* wait for MMU getting ready (low) */
                while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
                        udelay (10);
                }

                PRINTK2 ("MMU ready\n");


                return 0;
        } else {
                /* ack. int */
                SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG);
                /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
                PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
                         length);

                /* release packet */
                /* no need to release, MMU does that now */
#ifdef CONFIG_XAENIAX
                SMC_outw (MC_FREEPKT, MMU_CMD_REG);
#endif

                /* wait for MMU getting ready (low) */
                while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
                        udelay (10);
                }

                PRINTK2 ("MMU ready\n");


        }

        /* restore previously saved registers */
#ifndef CONFIG_XAENIAX
        SMC_outb( saved_pnr, PN_REG );
#else
        /* On Xaeniax board, we can't use SMC_outb here because that way
         * the Allocate MMU command will end up written to the command register
         * as well, which will lead to a problem.
         */
        SMC_outl(saved_pnr << 16, 0);
#endif
        SMC_outw( saved_ptr, PTR_REG );

        return length;
}

/*-------------------------------------------------------------------------
 |
 | smc_destructor( struct net_device * dev )
 |   Input parameters:
 |      dev, pointer to the device structure
 |
 |   Output:
 |      None.
 |
 ---------------------------------------------------------------------------
*/
void smc_destructor()
{
        PRINTK2(CARDNAME ": smc_destructor\n");
}


/*
 * Open and Initialize the board
 *
 * Set up everything, reset the card, etc ..
 *
 */
static int smc_open (bd_t * bd)
{
        int i, err;

        PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);

        /* reset the hardware */
        smc_reset ();
        smc_enable ();

        /* Configure the PHY */
#ifndef CONFIG_SMC91111_EXT_PHY
        smc_phy_configure ();
#endif

        /* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
/*      SMC_SELECT_BANK(0); */
/*      SMC_outw(0, RPC_REG); */
        SMC_SELECT_BANK (1);

        err = smc_get_ethaddr (bd);     /* set smc_mac_addr, and sync it with u-boot globals */
        if (err < 0) {
                memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
                return (-1);    /* upper code ignores this, but NOT bi_enetaddr */
        }
#ifdef USE_32_BIT
        for (i = 0; i < 6; i += 2) {
                word address;

                address = smc_mac_addr[i + 1] << 8;
                address |= smc_mac_addr[i];
                SMC_outw (address, (ADDR0_REG + i));
        }
#else
        for (i = 0; i < 6; i++)
                SMC_outb (smc_mac_addr[i], (ADDR0_REG + i));
#endif

        return 0;
}

/*-------------------------------------------------------------
 .
 . smc_rcv -  receive a packet from the card
 .
 . There is ( at least ) a packet waiting to be read from
 . chip-memory.
 .
 . o Read the status
 . o If an error, record it
 . o otherwise, read in the packet
 --------------------------------------------------------------
*/
static int smc_rcv()
{
        int     packet_number;
        word    status;
        word    packet_length;
        int     is_error = 0;
#ifdef USE_32_BIT
        dword stat_len;
#endif
        byte saved_pnr;
        word saved_ptr;

        SMC_SELECT_BANK(2);
        /* save PTR and PTR registers */
        saved_pnr = SMC_inb( PN_REG );
        saved_ptr = SMC_inw( PTR_REG );

        packet_number = SMC_inw( RXFIFO_REG );

        if ( packet_number & RXFIFO_REMPTY ) {

                return 0;
        }

        PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
        /*  start reading from the start of the packet */
        SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );

        /* First two words are status and packet_length */
#ifdef USE_32_BIT
        stat_len = SMC_inl(SMC91111_DATA_REG);
        status = stat_len & 0xffff;
        packet_length = stat_len >> 16;
#else
        status          = SMC_inw( SMC91111_DATA_REG );
        packet_length   = SMC_inw( SMC91111_DATA_REG );
#endif

        packet_length &= 0x07ff;  /* mask off top bits */

        PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );

        if ( !(status & RS_ERRORS ) ){
                /* Adjust for having already read the first two words */
                packet_length -= 4; /*4; */


                /* set odd length for bug in LAN91C111, */
                /* which never sets RS_ODDFRAME */
                /* TODO ? */


#ifdef USE_32_BIT
                PRINTK3(" Reading %d dwords (and %d bytes) \n",
                        packet_length >> 2, packet_length & 3 );
                /* QUESTION:  Like in the TX routine, do I want
                   to send the DWORDs or the bytes first, or some
                   mixture.  A mixture might improve already slow PIO
                   performance  */
                SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
                /* read the left over bytes */
                if (packet_length & 3) {
                        int i;

                        byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3));
                        dword leftover = SMC_inl(SMC91111_DATA_REG);
                        for (i=0; i<(packet_length & 3); i++)
                                *tail++ = (byte) (leftover >> (8*i)) & 0xff;
                }
#else
                PRINTK3(" Reading %d words and %d byte(s) \n",
                        (packet_length >> 1 ), packet_length & 1 );
                SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1);

#endif /* USE_32_BIT */

#if     SMC_DEBUG > 2
                printf("Receiving Packet\n");
                print_packet( NetRxPackets[0], packet_length );
#endif
        } else {
                /* error ... */
                /* TODO ? */
                is_error = 1;
        }

        while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
                udelay(1); /* Wait until not busy */

        /*  error or good, tell the card to get rid of this packet */
        SMC_outw( MC_RELEASE, MMU_CMD_REG );

        while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
                udelay(1); /* Wait until not busy */

        /* restore saved registers */
#ifndef CONFIG_XAENIAX
        SMC_outb( saved_pnr, PN_REG );
#else
        /* On Xaeniax board, we can't use SMC_outb here because that way
         * the Allocate MMU command will end up written to the command register
         * as well, which will lead to a problem.
         */
        SMC_outl( saved_pnr << 16, 0);
#endif
        SMC_outw( saved_ptr, PTR_REG );

        if (!is_error) {
                /* Pass the packet up to the protocol layers. */
                NetReceive(NetRxPackets[0], packet_length);
                return packet_length;
        } else {
                return 0;
        }

}


/*----------------------------------------------------
 . smc_close
 .
 . this makes the board clean up everything that it can
 . and not talk to the outside world.   Caused by
 . an 'ifconfig ethX down'
 .
 -----------------------------------------------------*/
static int smc_close()
{
        PRINTK2("%s: smc_close\n", SMC_DEV_NAME);

        /* clear everything */
        smc_shutdown();

        return 0;
}


#if 0
/*------------------------------------------------------------
 . Modify a bit in the LAN91C111 register set
 .-------------------------------------------------------------*/
static word smc_modify_regbit(int bank, int ioaddr, int reg,
        unsigned int bit, int val)
{
        word regval;

        SMC_SELECT_BANK( bank );

        regval = SMC_inw( reg );
        if (val)
                regval |= bit;
        else
                regval &= ~bit;

        SMC_outw( regval, 0 );
        return(regval);
}


/*------------------------------------------------------------
 . Retrieve a bit in the LAN91C111 register set
 .-------------------------------------------------------------*/
static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit)
{
        SMC_SELECT_BANK( bank );
        if ( SMC_inw( reg ) & bit)
                return(1);
        else
                return(0);
}


/*------------------------------------------------------------
 . Modify a LAN91C111 register (word access only)
 .-------------------------------------------------------------*/
static void smc_modify_reg(int bank, int ioaddr, int reg, word val)
{
        SMC_SELECT_BANK( bank );
        SMC_outw( val, reg );
}


/*------------------------------------------------------------
 . Retrieve a LAN91C111 register (word access only)
 .-------------------------------------------------------------*/
static int smc_get_reg(int bank, int ioaddr, int reg)
{
        SMC_SELECT_BANK( bank );
        return(SMC_inw( reg ));
}

#endif /* 0 */

/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */

#if (SMC_DEBUG > 2 )

/*------------------------------------------------------------
 . Debugging function for viewing MII Management serial bitstream
 .-------------------------------------------------------------*/
static void smc_dump_mii_stream (byte * bits, int size)
{
        int i;

        printf ("BIT#:");
        for (i = 0; i < size; ++i) {
                printf ("%d", i % 10);
        }

        printf ("\nMDOE:");
        for (i = 0; i < size; ++i) {
                if (bits[i] & MII_MDOE)
                        printf ("1");
                else
                        printf ("0");
        }

        printf ("\nMDO :");
        for (i = 0; i < size; ++i) {
                if (bits[i] & MII_MDO)
                        printf ("1");
                else
                        printf ("0");
        }

        printf ("\nMDI :");
        for (i = 0; i < size; ++i) {
                if (bits[i] & MII_MDI)
                        printf ("1");
                else
                        printf ("0");
        }

        printf ("\n");
}
#endif

/*------------------------------------------------------------
 . Reads a register from the MII Management serial interface
 .-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
static word smc_read_phy_register (byte phyreg)
{
        int oldBank;
        int i;
        byte mask;
        word mii_reg;
        byte bits[64];
        int clk_idx = 0;
        int input_idx;
        word phydata;
        byte phyaddr = SMC_PHY_ADDR;

        /* 32 consecutive ones on MDO to establish sync */
        for (i = 0; i < 32; ++i)
                bits[clk_idx++] = MII_MDOE | MII_MDO;

        /* Start code <01> */
        bits[clk_idx++] = MII_MDOE;
        bits[clk_idx++] = MII_MDOE | MII_MDO;

        /* Read command <10> */
        bits[clk_idx++] = MII_MDOE | MII_MDO;
        bits[clk_idx++] = MII_MDOE;

        /* Output the PHY address, msb first */
        mask = (byte) 0x10;
        for (i = 0; i < 5; ++i) {
                if (phyaddr & mask)
                        bits[clk_idx++] = MII_MDOE | MII_MDO;
                else
                        bits[clk_idx++] = MII_MDOE;

                /* Shift to next lowest bit */
                mask >>= 1;
        }

        /* Output the phy register number, msb first */
        mask = (byte) 0x10;
        for (i = 0; i < 5; ++i) {
                if (phyreg & mask)
                        bits[clk_idx++] = MII_MDOE | MII_MDO;
                else
                        bits[clk_idx++] = MII_MDOE;

                /* Shift to next lowest bit */
                mask >>= 1;
        }

        /* Tristate and turnaround (2 bit times) */
        bits[clk_idx++] = 0;
        /*bits[clk_idx++] = 0; */

        /* Input starts at this bit time */
        input_idx = clk_idx;

        /* Will input 16 bits */
        for (i = 0; i < 16; ++i)
                bits[clk_idx++] = 0;

        /* Final clock bit */
        bits[clk_idx++] = 0;

        /* Save the current bank */
        oldBank = SMC_inw (BANK_SELECT);

        /* Select bank 3 */
        SMC_SELECT_BANK (3);

        /* Get the current MII register value */
        mii_reg = SMC_inw (MII_REG);

        /* Turn off all MII Interface bits */
        mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);

        /* Clock all 64 cycles */
        for (i = 0; i < sizeof bits; ++i) {
                /* Clock Low - output data */
                SMC_outw (mii_reg | bits[i], MII_REG);
                udelay (SMC_PHY_CLOCK_DELAY);


                /* Clock Hi - input data */
                SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
                udelay (SMC_PHY_CLOCK_DELAY);
                bits[i] |= SMC_inw (MII_REG) & MII_MDI;
        }

        /* Return to idle state */
        /* Set clock to low, data to low, and output tristated */
        SMC_outw (mii_reg, MII_REG);
        udelay (SMC_PHY_CLOCK_DELAY);

        /* Restore original bank select */
        SMC_SELECT_BANK (oldBank);

        /* Recover input data */
        phydata = 0;
        for (i = 0; i < 16; ++i) {
                phydata <<= 1;

                if (bits[input_idx++] & MII_MDI)
                        phydata |= 0x0001;
        }

#if (SMC_DEBUG > 2 )
        printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
                phyaddr, phyreg, phydata);
        smc_dump_mii_stream (bits, sizeof bits);
#endif

        return (phydata);
}


/*------------------------------------------------------------
 . Writes a register to the MII Management serial interface
 .-------------------------------------------------------------*/
static void smc_write_phy_register (byte phyreg, word phydata)
{
        int oldBank;
        int i;
        word mask;
        word mii_reg;
        byte bits[65];
        int clk_idx = 0;
        byte phyaddr = SMC_PHY_ADDR;

        /* 32 consecutive ones on MDO to establish sync */
        for (i = 0; i < 32; ++i)
                bits[clk_idx++] = MII_MDOE | MII_MDO;

        /* Start code <01> */
        bits[clk_idx++] = MII_MDOE;
        bits[clk_idx++] = MII_MDOE | MII_MDO;

        /* Write command <01> */
        bits[clk_idx++] = MII_MDOE;
        bits[clk_idx++] = MII_MDOE | MII_MDO;

        /* Output the PHY address, msb first */
        mask = (byte) 0x10;
        for (i = 0; i < 5; ++i) {
                if (phyaddr & mask)
                        bits[clk_idx++] = MII_MDOE | MII_MDO;
                else
                        bits[clk_idx++] = MII_MDOE;

                /* Shift to next lowest bit */
                mask >>= 1;
        }

        /* Output the phy register number, msb first */
        mask = (byte) 0x10;
        for (i = 0; i < 5; ++i) {
                if (phyreg & mask)
                        bits[clk_idx++] = MII_MDOE | MII_MDO;
                else
                        bits[clk_idx++] = MII_MDOE;

                /* Shift to next lowest bit */
                mask >>= 1;
        }

        /* Tristate and turnaround (2 bit times) */
        bits[clk_idx++] = 0;
        bits[clk_idx++] = 0;

        /* Write out 16 bits of data, msb first */
        mask = 0x8000;
        for (i = 0; i < 16; ++i) {
                if (phydata & mask)
                        bits[clk_idx++] = MII_MDOE | MII_MDO;
                else
                        bits[clk_idx++] = MII_MDOE;

                /* Shift to next lowest bit */
                mask >>= 1;
        }

        /* Final clock bit (tristate) */
        bits[clk_idx++] = 0;

        /* Save the current bank */
        oldBank = SMC_inw (BANK_SELECT);

        /* Select bank 3 */
        SMC_SELECT_BANK (3);

        /* Get the current MII register value */
        mii_reg = SMC_inw (MII_REG);

        /* Turn off all MII Interface bits */
        mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);

        /* Clock all cycles */
        for (i = 0; i < sizeof bits; ++i) {
                /* Clock Low - output data */
                SMC_outw (mii_reg | bits[i], MII_REG);
                udelay (SMC_PHY_CLOCK_DELAY);


                /* Clock Hi - input data */
                SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
                udelay (SMC_PHY_CLOCK_DELAY);
                bits[i] |= SMC_inw (MII_REG) & MII_MDI;
        }

        /* Return to idle state */
        /* Set clock to low, data to low, and output tristated */
        SMC_outw (mii_reg, MII_REG);
        udelay (SMC_PHY_CLOCK_DELAY);

        /* Restore original bank select */
        SMC_SELECT_BANK (oldBank);

#if (SMC_DEBUG > 2 )
        printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
                phyaddr, phyreg, phydata);
        smc_dump_mii_stream (bits, sizeof bits);
#endif
}
#endif /* !CONFIG_SMC91111_EXT_PHY */


/*------------------------------------------------------------
 . Waits the specified number of milliseconds - kernel friendly
 .-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
static void smc_wait_ms(unsigned int ms)
{
        udelay(ms*1000);
}
#endif /* !CONFIG_SMC91111_EXT_PHY */


/*------------------------------------------------------------
 . Configures the specified PHY using Autonegotiation. Calls
 . smc_phy_fixed() if the user has requested a certain config.
 .-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
static void smc_phy_configure ()
{
        int timeout;
        byte phyaddr;
        word my_phy_caps;       /* My PHY capabilities */
        word my_ad_caps;        /* My Advertised capabilities */
        word status = 0;        /*;my status = 0 */
        int failed = 0;

        PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);


        /* Get the detected phy address */
        phyaddr = SMC_PHY_ADDR;

        /* Reset the PHY, setting all other bits to zero */
        smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST);

        /* Wait for the reset to complete, or time out */
        timeout = 6;            /* Wait up to 3 seconds */
        while (timeout--) {
                if (!(smc_read_phy_register (PHY_CNTL_REG)
                      & PHY_CNTL_RST)) {
                        /* reset complete */
                        break;
                }

                smc_wait_ms (500);      /* wait 500 millisecs */
        }

        if (timeout < 1) {
                printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
                goto smc_phy_configure_exit;
        }

        /* Read PHY Register 18, Status Output */
        /* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */

        /* Enable PHY Interrupts (for register 18) */
        /* Interrupts listed here are disabled */
        smc_write_phy_register (PHY_MASK_REG, 0xffff);

        /* Configure the Receive/Phy Control register */
        SMC_SELECT_BANK (0);
        SMC_outw (RPC_DEFAULT, RPC_REG);

        /* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
        my_phy_caps = smc_read_phy_register (PHY_STAT_REG);
        my_ad_caps = PHY_AD_CSMA;       /* I am CSMA capable */

        if (my_phy_caps & PHY_STAT_CAP_T4)
                my_ad_caps |= PHY_AD_T4;

        if (my_phy_caps & PHY_STAT_CAP_TXF)
                my_ad_caps |= PHY_AD_TX_FDX;

        if (my_phy_caps & PHY_STAT_CAP_TXH)
                my_ad_caps |= PHY_AD_TX_HDX;

        if (my_phy_caps & PHY_STAT_CAP_TF)
                my_ad_caps |= PHY_AD_10_FDX;

        if (my_phy_caps & PHY_STAT_CAP_TH)
                my_ad_caps |= PHY_AD_10_HDX;

        /* Update our Auto-Neg Advertisement Register */
        smc_write_phy_register (PHY_AD_REG, my_ad_caps);

        /* Read the register back.  Without this, it appears that when */
        /* auto-negotiation is restarted, sometimes it isn't ready and */
        /* the link does not come up. */
        smc_read_phy_register(PHY_AD_REG);

        PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
        PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);

        /* Restart auto-negotiation process in order to advertise my caps */
        smc_write_phy_register (PHY_CNTL_REG,
                                PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);

        /* Wait for the auto-negotiation to complete.  This may take from */
        /* 2 to 3 seconds. */
        /* Wait for the reset to complete, or time out */
        timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
        while (timeout--) {

                status = smc_read_phy_register (PHY_STAT_REG);
                if (status & PHY_STAT_ANEG_ACK) {
                        /* auto-negotiate complete */
                        break;
                }

                smc_wait_ms (500);      /* wait 500 millisecs */

                /* Restart auto-negotiation if remote fault */
                if (status & PHY_STAT_REM_FLT) {
                        printf ("%s: PHY remote fault detected\n",
                                SMC_DEV_NAME);

                        /* Restart auto-negotiation */
                        printf ("%s: PHY restarting auto-negotiation\n",
                                SMC_DEV_NAME);
                        smc_write_phy_register (PHY_CNTL_REG,
                                                PHY_CNTL_ANEG_EN |
                                                PHY_CNTL_ANEG_RST |
                                                PHY_CNTL_SPEED |
                                                PHY_CNTL_DPLX);
                }
        }

        if (timeout < 1) {
                printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
                failed = 1;
        }

        /* Fail if we detected an auto-negotiate remote fault */
        if (status & PHY_STAT_REM_FLT) {
                printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
                failed = 1;
        }

        /* Re-Configure the Receive/Phy Control register */
        SMC_outw (RPC_DEFAULT, RPC_REG);

smc_phy_configure_exit: ;

}
#endif /* !CONFIG_SMC91111_EXT_PHY */


#if SMC_DEBUG > 2
static void print_packet( byte * buf, int length )
{
        int i;
        int remainder;
        int lines;

        printf("Packet of length %d \n", length );

#if SMC_DEBUG > 3
        lines = length / 16;
        remainder = length % 16;

        for ( i = 0; i < lines ; i ++ ) {
                int cur;

                for ( cur = 0; cur < 8; cur ++ ) {
                        byte a, b;

                        a = *(buf ++ );
                        b = *(buf ++ );
                        printf("%02x%02x ", a, b );
                }
                printf("\n");
        }
        for ( i = 0; i < remainder/2 ; i++ ) {
                byte a, b;

                a = *(buf ++ );
                b = *(buf ++ );
                printf("%02x%02x ", a, b );
        }
        printf("\n");
#endif
}
#endif

int eth_init(bd_t *bd) {
#ifdef SHARED_RESOURCES
        swap_to(ETHERNET);
#endif
        return (smc_open(bd));
}

void eth_halt() {
        smc_close();
}

int eth_rx() {
        return smc_rcv();
}

int eth_send(volatile void *packet, int length) {
        return smc_send_packet(packet, length);
}

int smc_get_ethaddr (bd_t * bd)
{
        int env_size, rom_valid, env_present = 0, reg;
        char *s = NULL, *e, es[] = "11:22:33:44:55:66";
        char s_env_mac[64];
        uchar v_env_mac[6], v_rom_mac[6], *v_mac;

        env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
        if ((env_size > 0) && (env_size < sizeof (es))) {       /* exit if env is bad */
                printf ("\n*** ERROR: ethaddr is not set properly!!\n");
                return (-1);
        }

        if (env_size > 0) {
                env_present = 1;
                s = s_env_mac;
        }

        for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
                v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
                if (s)
                        s = (*e) ? e + 1 : e;
        }

        rom_valid = get_rom_mac (v_rom_mac);    /* get ROM mac value if any */

        if (!env_present) {     /* if NO env */
                if (rom_valid) {        /* but ROM is valid */
                        v_mac = v_rom_mac;
                        sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
                                 v_mac[0], v_mac[1], v_mac[2], v_mac[3],
                                 v_mac[4], v_mac[5]);
                        setenv ("ethaddr", s_env_mac);
                } else {        /* no env, bad ROM */
                        printf ("\n*** ERROR: ethaddr is NOT set !!\n");
                        return (-1);
                }
        } else {                /* good env, don't care ROM */
                v_mac = v_env_mac;      /* always use a good env over a ROM */
        }

        if (env_present && rom_valid) { /* if both env and ROM are good */
                if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
                        printf ("\nWarning: MAC addresses don't match:\n");
                        printf ("\tHW MAC address:  "
                                "%02X:%02X:%02X:%02X:%02X:%02X\n",
                                v_rom_mac[0], v_rom_mac[1],
                                v_rom_mac[2], v_rom_mac[3],
                                v_rom_mac[4], v_rom_mac[5] );
                        printf ("\t\"ethaddr\" value: "
                                "%02X:%02X:%02X:%02X:%02X:%02X\n",
                                v_env_mac[0], v_env_mac[1],
                                v_env_mac[2], v_env_mac[3],
                                v_env_mac[4], v_env_mac[5]) ;
                        debug ("### Set MAC addr from environment\n");
                }
        }
        memcpy (bd->bi_enetaddr, v_mac, 6);     /* update global address to match env (allows env changing) */
        smc_set_mac_addr ((uchar *)v_mac);      /* use old function to update smc default */
        PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
                v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
        return (0);
}

int get_rom_mac (uchar *v_rom_mac)
{
#ifdef HARDCODE_MAC     /* used for testing or to supress run time warnings */
        char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };

        memcpy (v_rom_mac, hw_mac_addr, 6);
        return (1);
#else
        int i;
        int valid_mac = 0;

        SMC_SELECT_BANK (1);
        for (i=0; i<6; i++)
        {
                v_rom_mac[i] = SMC_inb ((ADDR0_REG + i));
                valid_mac |= v_rom_mac[i];
        }

        return (valid_mac ? 1 : 0);
#endif
}