gas/ChangeLog

   1 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   2
   3         * config/tc-mips.c (append_insn): Remove bogus goto.
   4
   5 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   6
   7         * config/tc-mips.c (append_insn): Always clear the history after an
   8         unconditional branch.
   9
  10 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  11
  12         * config/tc-mips.c (find_altered_mips16_opcode): New function.
  13         (append_insn): Use it.
  14
  15 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  16
  17         * config/tc-mips.c (insn_uses_reg): Delete.
  18         (gpr_read_mask, gpr_write_mask): New functions.
  19         (fpr_read_mask, fpr_write_mask): Likewise.
  20         (insns_between, nops_for_vr4130, append_insn): Use them.
  21
  22 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  23
  24         * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
  25
  26 2011-06-29  Dave Martin  <dave.martin@linaro.org>
  27
  28         PR gas/12931
  29         * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
  30         state set the minimum required alignment of the section.
  31
  32 2011-06-29  Tristan Gingold  <gingold@adacore.com>
  33
  34         * config/tc-i386.c (i386_mach): Convert to ISO-C.
  35         (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
  36         (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
  37         (md_section_align, tc_gen_reloc): Ditto.
  38
  39 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  40
  41         * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
  42         generate dummy fix.
  43
  44 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  45
  46         * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
  47         (emit_jsrjmp): Ditto.
  48         (tc_gen_reloc): Ditto.
  49
  50 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  51
  52         * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
  53         (alpha_evax_proc_data): New variable.
  54         (s_alpha_ent): Prevent nested function.  Remove has_insert call.
  55         (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
  56         error.  Do not search in the hash table.  Check if match with .ent.
  57         (s_alpha_name): Remove unused variable.
  58         (md_begin): Remove initialization of alpha_evax_proc_hash.
  59
  60 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  61
  62         * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
  63         Locally declare basesym.  Add comments.  Do not set literal_pool_size.
  64         (load_expression): Adjust call to add_to_link_pool.
  65         (s_alpha_pdesc): Define pdesc symbol using dot.
  66         Do not set literal_pool_size.
  67         (s_alpha_end): Use NULL instead of 0.
  68
  69 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  70
  71         * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
  72         Fix style.
  73         * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
  74         field.  Add comments.
  75         (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
  76
  77 2011-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  78
  79         * config/tc-mips.c (fix_24k_record_store_info): If the previous
  80         instruction was a store, and the next instructions are unknown,
  81         assume the worst.
  82
  83 2011-06-25  Richard Sandiford  <rdsandiford@googlemail.com>
  84
  85         PR gas/12915
  86         * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
  87         (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
  88         (mips_emit_delays, start_noreorder): Update accordingly.
  89         (append_insn): Likewise.  Revert original fix for this PR
  90         and use the ignore parameter instead.
  91
  92 2011-06-24  Tristan Gingold  <gingold@adacore.com>
  93
  94         PR gas/11625
  95         * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
  96
  97 2011-06-24  Tristan Gingold  <gingold@adacore.com>
  98
  99         * config/tc-alpha.c (add_to_link_pool): Remove useless offset
 100         variable.  Fix style.
 101
 102 2011-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 103
 104         PR gas/12915
 105         * config/tc-mips.c (append_insn): Only consider hazards between the
 106         pre-noreorder block and ip.
 107
 108 2011-06-21  Sameera Deshpande  <sameera.deshpande@arm.com>
 109
 110         * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
 111         in vcvt instruction between floating-point and fixed-point.
 112         (operand_parse_code): Add "OP_oI32z".
 113         (parse_operands): OP_oI32z case added.
 114
 115 2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>
 116
 117         * configure.tgt: Revert x32 change.
 118
 119 2011-06-20  Nick Clifton  <nickc@redhat.com>
 120
 121         * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
 122         * doc/Makefile.in: Regenerate.
 123         * doc/all.texi: Set XSTORMY16.
 124         * doc/c-xstormy16.texi: New file.
 125
 126 2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>
 127
 128         * configure.tgt: Support x32.
 129
 130 2011-06-15  Nick Clifton  <nickc@redhat.com>
 131
 132         * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
 133
 134 2011-06-14  Tristan Gingold  <gingold@adacore.com>
 135
 136         * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
 137         (tc_new_dot_label): Define.
 138         (ppc_new_dot_label): Declare.
 139         * config/tc-ppc.c (ppc_frob_label): Set within target field.
 140         (ppc_fix_adjustable): Use this field to adjust the reloc.
 141         (ppc_new_dot_label): New function.
 142
 143 2011-06-14  Alan Modra  <amodra@gmail.com>
 144
 145         * po/POTFILES.in: Regenerate.
 146
 147 2011-06-13  Walter Lee  <walt@tilera.com>
 148
 149         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
 150         config/tc-tilepro.c.
 151         (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
 152         config/tc-tilepro.h.
 153         * Makefile.in: Regenerate.
 154         * configure.tgt (tilepro-*-*): New.
 155         (tilegx-*-*): Likewise.
 156         * config/tc-tilegx.c: New file.
 157         * config/tc-tilegx.h: Likewise.
 158         * config/tc-tilepro.h: Likewise.
 159         * config/tc-tilepro.c: Likewise.
 160         * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
 161         c-tilepro.texi.
 162         * doc/Makefile.in: Regenerate.
 163         * doc/all.texi (TILEGX): Define.
 164         (TILEPRO): Define.
 165         * doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
 166         c-tilegx.texi and c-tilepro.texi.
 167         * doc/c-tilegx.texi: New.
 168         * doc/c-tilepro.texi: New.
 169
 170 2011-06-13  Nick Clifton  <nickc@redhat.com>
 171
 172         PR gas/12854
 173         * config/tc-arm.c (do_shift): Do not allow shift operations at the
 174         end of a register based shift insn.
 175         (do_t_shift): Likewise.
 176
 177 2011-06-13  Nick Clifton  <nickc@redhat.com>
 178
 179         * config/tc-score.c (s3_my_get_expression): Delete unused local
 180         variable 'seg'.
 181         (s3_do_ldst_insn): Delete unused local variable 'strbak'.
 182         (s3_do16_ldst_insn): Delete unused local variable 'temp'.
 183         (s3_do_macro_bcmp): Zero inst_expand array.
 184         (s3_do_macro_bcmpz): Likewise.
 185         (s3_s_score_end): Delete unused local variable 'dot'.
 186         (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 187         * config/tc-score7.c (s7_my_get_expression): Delete unused local
 188         variable 'seg'.
 189         (s7_do_ldst_insn): Delete unused local variable 'strbak'.
 190         (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
 191         'r_new'.
 192         (s7_s_score_end): Delete unused local variable 'dot'.
 193         (s7_relax_frag): Delete unused local variable 'relax_size'.
 194         (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 195
 196 2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>
 197
 198         AVX Programming Reference (June, 2011)
 199         * config/tc-i386.c (i386_error): Add invalid_vsib_address and
 200         unsupported_vector_index_register.
 201         (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
 202         (check_VecOperands): New.
 203         (match_template): Call check_VecOperands.  Handle
 204         invalid_vsib_address and unsupported_vector_index_register.
 205         (build_modrm_byte): Support VecSIB.  Check register-only source
 206         operand when two source operands are swapped.
 207         (i386_index_check): Allow Xmm/Ymm index registers.
 208
 209         * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
 210         and invpcid./invpcid.
 211
 212 2011-06-09  Nick Clifton  <nickc@redhat.com>
 213
 214         PR gas/12861
 215         * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
 216         code.
 217         (check_cinv_options): Remove unused local variables.  Make
 218         function void.
 219         (md_assemble): Remove unused local variable.
 220
 221 2011-06-09  James Greenhalgh  <james.greenhalgh@arm.com>
 222
 223         * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
 224
 225 2011-06-03  Arnaud Patard  <arnaud.patard@rtp-net.org>
 226
 227         PR gas/12698
 228         * config/tc-arm.c (parse_psr): Set m_profile to false when
 229         assembling for any architecture.
 230
 231 2011-06-02  Jie Zhang jie@codesourcery.com
 232             Nathan Sidwell nathan@codesourcery.com
 233
 234         * config/tc-arm.c (parse_address_main): Handle -0 offsets.
 235         (encode_arm_addr_mode_2): Set default sign of zero here ...
 236         (encode_arm_addr_mode_3): ... and here.
 237         (encode_arm_cp_address): ... and here.
 238         (md_apply_fix): Use default sign of zero here.
 239
 240 2011-06-02  Nick Clifton  <nickc@redhat.com>
 241
 242         * as.c: Fix spelling typo.
 243         * read.c: Likewise.
 244         * config/tc-ppc.c: Likewise.
 245         * po/gas.pit: Regenerate.
 246
 247 2011-05-31  Paul Brook  <paul@codesourcery.com>
 248
 249         * config/tc-arm.c (arm_cpus): Add Cortex-R5.
 250         (arm_extensions): Allow idiv on ARMv7-R.
 251         * doc/c-arm.text: Update idiv extension restrictions.
 252
 253 2011-05-31  Paul Brook  <paul@codesourcery.com>
 254
 255         * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
 256         loads.
 257
 258 2011-05-31  Paul Brook  <paul@codesourcery.com>
 259
 260         * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
 261         addresses.
 262
 263 2011-05-31  Paul Brook  <paul@codesourcery.com>
 264         Nathan Sidwell  <nathan@codesourcery.com>
 265
 266         * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
 267         pc-relative fixes to constants.
 268         * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
 269
 270 2011-05-27  Nick Clifton  <nickc@redhat.com>
 271
 272         * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
 273
 274 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 275
 276         * config/tc-s390.c (md_gather_operands): Fix check for floating
 277         register pair operands.
 278
 279 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 280
 281         * config/tc-s390.c (md_gather_operands): Emit an error for odd
 282         numbered registers used as register pair operand.
 283
 284 2011-05-23  Nick Clifton  <nickc@redhat.com>
 285
 286         * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
 287
 288 2011-05-20  Bernd Schmidt  <bernds@codesourcery.com>
 289
 290         * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
 291         (tic6x_parse_name): Handle it.
 292         (tic6x_fix_new_exp): Handle O_pcr_offset.
 293         (tic6x_fix_adjustable): Return 0 for the new relocs.
 294         (md_apply_fix): Handle them.
 295         (tc_gen_reloc): Likewise.
 296         * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
 297
 298 2011-05-18  Nick Clifton  <nickc@redhat.com>
 299
 300         PR gas/12754
 301         * config/tc-tic30.c (ordinal_names): Allow translation of the
 302         ordinal names.
 303
 304 2011-05-18  Nick Clifton  <nickc@redhat.com>
 305
 306         * config/tc-arm.c (s_unreq): Reword warning message to make it
 307         easier to translate.
 308         * config/tc-ia64.c (md_show_usage): Add note for translators.
 309         * configure.in (ALL_LINGUAS): Add "fi".
 310         * configure: Regenerate.
 311
 312 2011-05-18  Tristan Gingold  <gingold@adacore.com>
 313
 314         * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
 315         Put size into an union with dw.
 316         (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
 317         (ppc_xcoff_end): Declare.
 318         (md_end): Define.
 319         * config/tc-ppc.c: Add includes for xcoff.
 320         (ppc_dwsect): New function.
 321         (md_pseudo_table): Add dwsect.
 322         (struct dw_subsection): New.
 323         (dw_sections): New.
 324         (ppc_change_debug_section): New function.
 325         (ppc_xcoff_end): Ditto.
 326         (ppc_function): Adjust for ppc_tc_sy.
 327         (ppc_symbol_new_hook): Ditto.
 328         (ppc_frob_symbol): Ditto.
 329         (ppc_frob_section): Do not set vma for debug sections.
 330         (ppc_fix_adjustable): Return true for debug sections.
 331         * config/obj-coff.c: Add includes for xcoff.
 332         (coff_frob_section): Handle dwarf section.
 333
 334 2011-05-17  Nick Clifton  <nickc@redhat.com>
 335
 336         * po/fi.po: New Finnish translation.
 337         * po/fr.po: Updated French translation.
 338
 339         * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
 340         * config/tc-mt.c (md_assemble): Fix typos in warning messages.
 341         * cond.c (s_else): Fix typos in error messages.
 342         * config/tc-pj.c (md_assemble): Fix typo in error message.
 343
 344 2011-05-16  Hans-Peter Nilsson  <hp@axis.com>
 345
 346         * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
 347         emitting ELF object.
 348         (md_show_usage): Only mention --pic if the assembler can generate
 349         ELF objects.
 350         * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
 351         prerequisite for --pic being a valid option.
 352
 353 2011-05-13  Frederic Marchal  <fmarchal@perso.be>
 354
 355         PR gas/12755
 356         * config/tc-v850.c (parse_register_list): Correct error string.
 357
 358 2011-05-12  Quentin Neill  <quentin.neill@amd.com>
 359
 360         * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
 361         (i386_align_code): Ditto
 362
 363 2011-05-12  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 364
 365         PR gas/12715
 366         * config/tc-arm.c (parse_big_immediate):  Fix parsing of 64-bit
 367         immediates on 32-bit hosts.
 368
 369 2011-05-10  Quentin Neill  <quentin.neill@amd.com>
 370
 371         * config/tc-i386.c (cpu_arch): Add bdver2 and rename
 372         PROCESSOR_BDVER1 to PROCESSOR_BDVER.
 373         (i386_align_code): Rename PROCESSOR_BDVER1.
 374         (processor_type): Ditto.
 375         * doc/c-i386.texi: Add bdver2.
 376
 377 2011-05-10  Alan Modra  <amodra@gmail.com>
 378
 379         * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
 380
 381 2011-05-09  Paul Brook  <paul@codesourcery.com>
 382
 383         * config/tc-tic6x.c (streq): Define.
 384         (tic6x_get_unwind): New.
 385         (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
 386         s_tic6x_personalityindex, s_tic6x_personality): New functions.
 387         (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
 388         "personality" and "cantunwind".
 389         (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
 390         tic6x_start_unwind_section, tic6x_unwind_frame_regs,
 391         tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
 392         tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
 393         tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
 394         tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
 395         tic6x_cfi_endproc): New.
 396         * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
 397         (tic6x_unwind_info): New.
 398         (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
 399         text_unwind.
 400         (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
 401         tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
 402         DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
 403         tc_cfi_section_name): Define.
 404         * doc/c-tic6x.texi: Document new unwinding directives.
 405         * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
 406         definitions.
 407         (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
 408         CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
 409         Move to dw2gencfi.h.
 410         (CFI_EMIT_target): Define.
 411         (dot_cfi_sections): Check tc_cfi_section_name.
 412         (dot_cfi_startproc): Use tc_cfi_startproc.
 413         (dot_cfi_endproc): Use tc_cfi_endproc.
 414         * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
 415         CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
 416         CFI_val_encoded_addr):  Move to here from dw2gencfi.c.
 417
 418 2011-05-07  Alan Modra  <amodra@gmail.com>
 419
 420         * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
 421         Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
 422         (struct fde_entry): Rename cseg to cur_seg.
 423         (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
 424         (get_cfi_seg): Likewise.  Use if (SUPPORT_FRAME_LINKONCE) rather
 425         that #if SUPPORT_FRAME_LINKONCE.
 426         (cfi_finish): Likewise.
 427
 428 2011-05-06  Tristan Gingold  <gingold@adacore.com>
 429
 430         * read.c (s_comm_internal): Remove code for OBJ_VMS.
 431         (s_data): Ditto.
 432         (s_text): Ditto.
 433         * write.c (write_object_file): Ditto.
 434         * symbols.c (define_sym_at_dot): Ditto.
 435         (colon): Ditto.
 436
 437 2011-05-05  Alan Modra  <amodra@gmail.com>
 438
 439         * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define.  Use throughout
 440         file to conditionally compile code added 2011-04-26.
 441         (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
 442         when SUPPORT_FRAME_LINKONCE.
 443         (get_cfi_seg): Likewise.  Reintroduce old code for when not
 444         SUPPORT_FRAME_LINKONCE.
 445         (cfi_finish): Move get_cfi_seg calls out of loop when not
 446         SUPPORT_FRAME_LINKONCE.  Avoid unused var warning.
 447
 448 2011-05-03  Paul Brook  <paul@codesourcery.com>
 449
 450         * config/tc-tic6x.c (s_ehtype): New function.
 451         (md_pseudo_table): Add "ehtype".
 452         (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
 453         * doc/c-tic6x.texi: Document .ehtype directive.
 454
 455 2011-04-26  Kai Tietz  <ktietz@redhat.com>
 456
 457         * dw2gencfi.c (dwcfi_seg_list): New struct.
 458         (dwcfi_hash): New static hash variable.
 459         (get_debugseg_name): New.
 460         (alloc_debugseg_item): New.
 461         (make_debug_seg): New.
 462         (dwcfi_hash_insert): New.
 463         (dwcfi_hash_find): New.
 464         (dwcfi_hash_find_or_make): New.
 465         (cfi_insn_data): New member cur_seg.
 466         (cie_entry): Likewise.
 467         (fde_entry): New cseg and handled members.
 468         (alloc_fde_entry): Initialize cseg member.
 469         (alloc_cfi_insn_data): Initialize cur_seg member.
 470         (dot_cfi_sections): Compare for beginning of
 471         section names via strncmp.
 472         (get_cfi_seg): New.
 473         (cfi_finish): Treat link-once sections.
 474         (is_now_linkonce_segment): New local helper.
 475         (output_cie): Ignore cie entries not member of current
 476         segment.
 477         (output_fde): Likewise.
 478         (select_cie_for_fde): Likewise.
 479         (cfi_change_reg_numbers): Add new argument for current segment
 480         and ignore insn elements, if not part of current segment.
 481         * ehopt.c (get_cie_info): Use strncmp for
 482         section name matching.
 483         (heck_eh_frame): Likewise.
 484
 485 2011-04-20  Catherine Moore  <clm@codesourcery.com>
 486             David Ung <davidu@mips.com>
 487
 488         * config/mips.c (mips_cl_insn): Add new field complete_p.
 489         (create_insn): Initialize complete_p to zero.
 490         (BASE_REG_EQ): New.
 491         (fix_24k_align_to): New.
 492         (fix_24k_store_info): Declare.
 493         (fix_24k_sort): New.
 494         (fix_24k_record_store_info): New.
 495         (nops_for_24k): New.
 496         (nops_for_insn): Call nops_for_24k.
 497         (append_insn): Move O_constant expression handling.
 498
 499 2011-04-20  Alan Modra  <amodra@gmail.com>
 500
 501         * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
 502         (hash_new_sized): New function, split out from..
 503         (hash_new): ..here.
 504
 505 2011-04-19  Nick Clifton  <nickc@redhat.com>
 506
 507         * config/tc-arm.c (v7m_psrs): Revert previous delta.
 508
 509 2011-04-18  Julian Brown  <julian@codesourcery.com>
 510             Nick Clifton  <nickc@redhat.com>
 511
 512         * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
 513         detect M-profile targets.
 514         (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
 515         (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
 516
 517 2011-04-14  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 518
 519         * config/tc-s390.c (s390_machine): New prototype.
 520         (md_pseudo_table): New pseudo-op .machine.
 521         (s390_opcode_hash): Initialize to NULL.
 522         (s390_parse_cpu): New function.
 523         (md_parse_option): Use s390_parse_cpu.
 524         (s390_setup_opcodes): New function.
 525         (md_begin): Use s390_setup_opcodes.
 526         (s390_machine): New hook handling the new .machine pseudo.
 527
 528         * doc/c-s390.texi: Document the new pseudo op .machine.
 529
 530 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 531
 532         * config/tc-i386.c (i386_mach): Start error message with lower
 533         case.
 534         (md_begin): Likewise.
 535         (md_parse_option): Likewise.
 536         (i386_target_format): Likewise.
 537         (check_byte_reg): Likewise.
 538         (check_long_reg): Likewise.
 539         (check_qword_reg): Likewise.
 540         (check_word_reg): Likewise.
 541
 542 2011-04-12  Nick Clifton  <nickc@redhat.com>
 543
 544         PR gas/12532
 545         * config/tc-arm.c (relax_branch): Do not relax branches to
 546         preemptable global symbols.
 547
 548 2011-04-11  Julian Brown  <julian@codesourcery.com>
 549
 550         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
 551         for *APSR bitmasks.
 552         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
 553         Remove OP_RVC_PSR.
 554         (parse_operands): Likewise.
 555         (do_mrs): Tweak error message for constraint.
 556         (do_t_mrs): Update constraints for changes to APSR support.
 557         (do_t_msr): Likewise. Don't set PSR_f flag here.
 558         (psrs): Remove "g", "nzcvq", "nzcvqg".
 559         (insns): Tweak entries for msr and mrs instructions.
 560
 561 2011-04-11  Kai Tietz  <ktietz@redhat.com>
 562
 563         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
 564
 565 2011-04-11  Nick Clifton  <nickc@redhat.com>
 566
 567         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
 568         * config/tc-i386.h (x86_cons): Always prototype.
 569
 570         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
 571         in order to avoid a compile time warning.
 572         (getprocreg_image): Likewise.
 573
 574 2011-04-11  Alan Modra  <amodra@gmail.com>
 575
 576         * config/tc-cr16.c (getprocreg_image): Correct range check.
 577         (getprocregp_image): Likewise.
 578
 579 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
 580
 581         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
 582         xscale*be|xscale*b, xscale*): Remove architectures.
 583         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
 584         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
 585
 586 2011-04-01  Tristan Gingold  <gingold@adacore.com>
 587
 588         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
 589
 590 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
 591
 592         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
 593         static variables.
 594         (md_begin): Initialize them.
 595         (s_tic6x_scomm): New static function.
 596         (md_pseudo_table): Add "scomm".
 597         (tc_gen_reloc): Really undo all adjustments made by
 598         bfd_install_relocation.
 599         * doc/c-tic6x.texi: Document the .scomm directive.
 600
 601 2011-03-31  Tristan Gingold  <gingold@adacore.com>
 602
 603         * dwarf2dbg.c (DWARF2_VERSION): Define.
 604         (out_debug_line): Use it.
 605         (out_debug_aranges): Ditto.
 606         (out_debug_info): Ditto.
 607         * config/tc-ia64.h (DWARF2_VERSION): Override it.
 608
 609 2011-03-30  Michael Snyder  <msnyder@vmware.com>
 610
 611         * obj-elf.c (obj_elf_section): Free malloced name.
 612         * macro.c (get_any_string): Free malloced br_buf.
 613         (do_formals): Free 'formal'.
 614
 615 2011-03-30  Tristan Gingold  <gingold@adacore.com>
 616
 617         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
 618         to offset only if within is set.
 619         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
 620         within only for symbols.
 621
 622 2011-03-29  Richard Henderson  <rth@redhat.com>
 623
 624         PR 12610
 625         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
 626         label; zap alpha_insn_label.
 627
 628 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 629
 630         * config/tc-i386.c (handle_quad): Properly handle multiple
 631         operands.
 632
 633 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 634
 635         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 636         reg $2 is the same as dest reg $4.
 637
 638 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 639
 640         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 641         reg $2 is the same as dest reg $4.
 642
 643 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 644
 645         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 646         reg $2 is the same as dest reg $4.
 647
 648 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 649
 650         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 651         reg $1 is the same as dest reg $7.
 652
 653 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 654
 655         * config/tc-i386.c (handle_quad): New.
 656         (md_pseudo_table): Add "quad".
 657
 658 2011-03-26  John Marino  <binutils@marino.st>
 659
 660         * configure.tgt: Fix support for *-*-dragonfly*.
 661         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 662         * config/te-dragonfly.h: New file.
 663
 664 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 665
 666         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 667         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 668         at90pwm161.
 669         * doc/c-avr.texi: Document new device names.
 670
 671 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 672
 673         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 674         reg $1 is the same as dest reg $7.
 675         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 676         dest reg $7.
 677
 678 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 679
 680         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 681         P is mismatched.  Check destination regno are off by one when P is
 682         set, or are equal when P is not set.
 683
 684 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 685
 686         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
 687         the same as dest reg $4.
 688         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
 689
 690 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
 691
 692         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
 693         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
 694         * doc/c-avr.texi: Document new device names.
 695
 696 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
 697
 698         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
 699         (AVR_INSN): Change definition to match.
 700         (avr_opcodes): Likewise, change to match.
 701         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
 702         (md_show_usage): Add XMEGA architecture names.
 703         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
 704         Add support for SPM Z+ instruction.
 705         * doc/c-avr.texi: Add documentation for XMEGA architectures and
 706         devices.
 707
 708 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
 709
 710         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
 711
 712 2011-03-18  Alan Modra  <amodra@gmail.com>
 713
 714         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
 715         on .size expression errors rather than symbols in the size expression.
 716
 717 2011-03-18  Alan Modra  <amodra@gmail.com>
 718
 719         * input-scrub.c (line_numberT): Delete.
 720         (input_scrub_close): Reset line counters.
 721         * messages.c (as_show_where): Don't print invalid line number.
 722         (as_warn_internal, as_bad_internal): Likewise.
 723
 724 2011-03-18  Alan Modra  <amodra@gmail.com>
 725
 726         * read.c (read_a_source_file): Remove md_after_pass_hook.
 727         Move "quit" label before set of dot_symbol.
 728         * config/tc-d10v.h (md_after_pass_hook): Don't define.
 729         * config/tc-d30v.h (md_after_pass_hook): Likewise.
 730         * config/tc-m32r.h (md_after_pass_hook): Likewise.
 731         (md_cleanup): Define to call m32r_fill_insn.
 732
 733 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 734
 735         * config/tc-s390.c (md_parse_option): Add -march=all option which
 736         switches to the highest available CPU.
 737
 738 2011-03-17  Alan Modra  <amodra@gmail.com>
 739
 740         PR 12569
 741         * expr.c (operand): Correct passing of "mode" to expr.
 742         * read.c (do_org): Allow expr_section.
 743         (get_known_segmented_expression): Don't assert anything about the
 744         segment.
 745
 746 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
 747
 748         * as.c (show_usage): Add --size-check=.
 749         (parse_args): Add and handle OPTION_SIZE_CHECK.
 750
 751         * as.h (flag_size_check): New.
 752
 753         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
 754         bad .size directive only for --size-check=error.
 755
 756         * doc/as.texinfo: Document --size-check=.
 757
 758 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
 759
 760         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
 761         bf542/bf544/bf547/bf548/bf549.
 762
 763 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 764
 765         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
 766         determine whether a relocation is needed.
 767         (md_apply_fix, arm_apply_sym_value): Likewise.
 768
 769 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 770
 771         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
 772         for Thumb symbols.
 773
 774 2011-03-11  Nick Clifton  <nickc@redhat.com>
 775
 776         * remap.c (remap_debug_filename): Always allocate a buffer for the
 777         returned pointer.
 778         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
 779         remap_debug_filename.
 780
 781 2011-03-10  Michael Snyder  <msnyder@vmware.com>
 782
 783         Revert the following change:
 784         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 785         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 786
 787 2011-03-10  Alan Modra  <amodra@gmail.com>
 788
 789         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
 790         TARGET_SYMBOL_FIELDS): Don't define.
 791         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
 792
 793 2011-03-09  Michael Snyder  <msnyder@vmware.com>
 794
 795         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 796         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 797         (emit_fixed_inc_line_addr): Assign instead of conditional in
 798         assert.
 799
 800 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 801
 802         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
 803         non-constant .size expression.
 804
 805 2011-03-02  Nick Clifton  <nickc@redhat.com>
 806
 807         * ecoff.c: Incldue filenames.h
 808
 809 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
 810
 811         * depend.c (register_dependency): Use filename_(n)cmp.
 812         * dwarf2dbg.c (get_filenum): Likewise.
 813         * ecoff.c (add_file): Likewise.
 814         (ecoff_generate_asm_lineno): Likewise.
 815         * input-scrub.c (new_logical_line_flags): Likewise.
 816         * listing.c (file_info): Likewise.
 817         (listing_newline): Likewise.
 818         * remap.c (remap_debug_filename): Likewise.
 819         * stabs.c (generate_asm_file): Likewise.
 820         (stabs_generate_asm_lineno): Likewise.
 821
 822 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 823
 824         * config/tc-mips.c (append_insn): Disable branch relaxation for
 825         DSP instructions.
 826
 827 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 828
 829         * config/tc-mips.c (macro): Handle M_PREF_AB.
 830
 831 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 832
 833         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
 834         register to use.
 835         (RELAX_BRANCH_UNCOND): Adjust accordingly.
 836         (RELAX_BRANCH_LIKELY): Likewise.
 837         (RELAX_BRANCH_LINK): Likewise.
 838         (RELAX_BRANCH_TOOFAR): Likewise.
 839         (RELAX_BRANCH_AT): New macro.
 840         (append_insn): Encode the temporary register to use in standard
 841         MIPS branch relaxation.
 842         (relaxed_branch_length): Update according to changes to
 843         RELAX_BRANCH_ENCODE.
 844         (md_convert_frag): Use the encoded register as the temporary.
 845
 846 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 847
 848         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
 849         reject PC-relative relocations.
 850
 851 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 852
 853         * config/tc-mips.c (md_convert_frag): Correct message
 854         capitalization.
 855
 856 2011-02-28  Alan Modra  <amodra@gmail.com>
 857
 858         * symbols.c (report_op_error): Remove unnecessary forward declaration.
 859         Add "op" parameter.  Report operator and operand segments in error
 860         message, not operand symbols.
 861         (resolve_symbol_value): Always set segment for equated symbols, not
 862         just when finalizing.  Adjust report_op_error calls.
 863
 864 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 865
 866         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
 867         if 64bit relocations aren't allowed.
 868
 869 2011-02-25  Alan Modra  <amodra@gmail.com>
 870
 871         PR gas/12519
 872         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
 873
 874 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
 875
 876         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
 877         initialization of offset_reloc.
 878
 879 2011-02-15  Richard Henderson  <rth@redhat.com>
 880
 881         * dw2gencfi.c (dot_cfi_dummy): New.
 882         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
 883         * read.c (pobegin): Unconditionally call cfi_pop_insert.
 884
 885 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 886
 887         * configure: Regenerate.
 888
 889 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
 890
 891         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
 892         * config/bfin-parse.y (BYTEOP2M): Delete token.
 893         (asm_1): Remove BYTEOP2M insn matching.
 894
 895 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
 896
 897         * config/bfin-defs.h: Include opcode/bfin.h.
 898         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
 899
 900 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 901
 902         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
 903         (Modify Registers): Fix subtracted typo.
 904         (.byte2): Extend and swap descriptions with .byte4.
 905         (.byte4): Extend and swap descriptions with .byte2.
 906         (.db, .dw, .dd): Document behavior.
 907
 908 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 909
 910         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
 911
 912 2011-02-11  Alan Modra  <amodra@gmail.com>
 913
 914         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
 915
 916 2011-02-10  Alan Modra  <amodra@gmail.com>
 917
 918         * doc/as.texinfo (Overview): Add missing markup around Blackfin
 919         and PowerPC options.
 920
 921 2011-02-10  Alan Modra  <amodra@gmail.com>
 922
 923         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
 924         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
 925         (Overview <Target PowerPC options>): Add a number of missing options.
 926         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
 927
 928 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 929
 930         PR gas/6957
 931         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
 932         for i686.
 933
 934 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 935
 936         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
 937         for ISA extensions.
 938         (md_parse_option): Likewise.
 939
 940 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
 941
 942         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
 943         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
 944         (TIC6X Options): Don't mention "-matomic".
 945         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
 946         (md_longopts): Remove corresponding entries.
 947         (md_parse_option): Don't handle them.
 948         (md_show_usage): Don't document them.
 949         (tic6x_atomic): Delete variable.
 950         (tic6x_update_features): Always copy tic6x_arch_enable to
 951         tic6x_features.
 952         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
 953         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
 954         (md_pseudo_table): Remove ".atomic" and ".noatomic".
 955
 956 2011-01-31  Nick Clifton  <nickc@redhat.com>
 957
 958         * write.c (write_contents): Include output file name and bfd error
 959         value when reporting the inability to write to the output file.
 960         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
 961         frag that has a non-zero fill value.
 962
 963 2011-01-27  DJ Delorie  <dj@redhat.com>
 964
 965         * config/tc-rx.c (md_convert_frag): If we can't compute the target
 966         address, zero out the values stored in the object file to make
 967         objdump's output consistent.
 968
 969 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
 970
 971         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
 972         x86_dwarf2_return_column to 32.
 973
 974 2011-01-20  Nick Clifton  <nickc@redhat.com>
 975
 976         PR gas/12384
 977         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
 978         comparison.
 979
 980 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 981
 982         * write.c (compress_debug): Return if section size is smaller
 983         than 32 bytes.
 984
 985 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 986
 987         PR gas/12409
 988         * write.c (compress_debug): Return if section size is 0.
 989
 990 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
 991
 992         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
 993         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
 994         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
 995         fmp626} options.
 996
 997 2011-01-18  Nick Clifton  <nickc@redhat.com>
 998
 999         PR gas/12390
1000         * doc/all.texi: Add NS32K
1001         * doc/as.texinfo: Remove target specific details of which
1002         characters act as comment initiators and statement separators into
1003         individual target specific files.
1004         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
1005         the hash character at the start of a line.
1006         * doc/c-arm.texi (ARM-Chars): Likewise.
1007         * doc/c-avr.texi (AVR-Chars): Likewise.
1008         * doc/c-d10v.texi (D10V-Chars): Likewise.
1009         * doc/c-d30v.texi (D30V-Chars): Likewise.
1010         * doc/c-mmix.texi (MMIX-Chars): Likewise.
1011         * doc/c-s390.texi (s390 characters): Likewise.
1012         * doc/c-sh.texi (SH-Chars): Likewise.
1013         * doc/c-sh64.texi (SH64-Chars): Likewise.
1014         * doc/c-sparc.texi (SPARC-Chars): Likewise.
1015         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1016         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1017         * doc/c-z80.texi (Z80-Chars): Likewise.
1018         * doc/c-z8k.texi (Z8000-Chars): Likewise.
1019         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1020         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1021         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1022         line separator characters.
1023         * doc/c-cr16.texi (CR16 Syntax): Likewise.
1024         * doc/c-i386.texi (i386-Chars): Likewise.
1025         * doc/c-i860.texi (i860-Chars): Likewise.
1026         * doc/c-i960.texi (i960-Chars): Likewise.
1027         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1028         * doc/c-lm32.texi (LM32-Chars): likewise.
1029         * doc/c-m32c.texi (M32C-Chars): Likewise.
1030         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1031         * doc/c-m68k.texi (M68K-Chars): Likewise.
1032         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1033         * doc/c-msp430.texi (MSP430-Chars): Likewise.
1034         * doc/c-mt.texi (MT-Chars): Likewise.
1035         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1036         * doc/c-pj.texi (PJ-Chars): Likewise.
1037         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1038         * doc/c-rx.texi (RX-Chars): Likewise.
1039         * doc/c-score.texi (SCORE-Chars): Likewise.
1040         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1041         * doc/c-v850.texi (V850-Chars): Likewise.
1042         * doc/c-vax.texi (VAX-Chars): Likewise.
1043         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1044
1045 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
1046
1047         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1048
1049         * doc/c-i386.texi (i386-TBM): New section.
1050
1051 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
1052
1053         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1054         (disallow_64bit_reloc): This.
1055         (md_assemble): Don't check movabs for x32 mode here.
1056         (i386_target_format): Updated.
1057         (tc_gen_reloc): Check if 64bit relocations are allowed.
1058
1059 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
1060
1061         * config/tc-i386.c (disallow_64bit_disp): New.
1062         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1063         X86_64_ABI/X86_64_X32_ABI.
1064         (md_assemble): Don't allow movabs with relocation in x32 mode.
1065         (i386_target_format): Updated.
1066
1067 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
1068
1069         * config/tc-i386.c (OPTION_N32): Renamed to ...
1070         (OPTION_X32): This.
1071         (md_longopts): Replace n32 with x32.
1072         (md_parse_option): Updated.
1073         (md_show_usage): Likewise.
1074
1075         * doc/c-i386.texi: Replace --n32 with --x32.
1076
1077 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
1078
1079         * config/tc-mips.c (mips_ip): Update error messages.  Take an
1080         unadjusted offset for "+c" argument.
1081
1082 2011-01-10  Nick Clifton  <nickc@redhat.com>
1083
1084         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1085         it.
1086
1087 2011-01-10  Nick Clifton  <nickc@redhat.com>
1088
1089         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1090         part of the file.
1091
1092 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
1093             Glauber de Oliveira Costa  <glommer@gmail.com>
1094
1095         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
1096         .tlsdescseq directive.
1097         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
1098         following a symbol.
1099         (s_arm_tls_descseq): New directive.
1100         (md_pseudo_table): Add it.
1101         (encode_branch): Allow TLS_CALL relocs too.
1102         (do_t_blx, do_t_branch23): Use encode_branch.
1103         (reloc_names): Add tlsdesc and tlscall.
1104         (md_apply_fix): Process tls desc relocations.
1105         (tc_gen_reloc): Likewise.
1106         (arm_fix_adjustable): Likewise.
1107
1108 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
1109
1110         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
1111
1112         * doc/c-i386.texi (i386-BMI): New section.
1113
1114 2011-01-06  Paul Koning  <ni1d@arrl.net>
1115
1116         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
1117         references to absolute addresses.
1118
1119 2011-01-05  DJ Delorie  <dj@redhat.com>
1120
1121         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
1122         instead of an RH_NEG32 one.
1123
1124 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
1125
1126         * doc/c-i386.texi: Clarify --n32.
1127
1128 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1129
1130         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
1131         integer registers in VEX.vvvv.  Check register-only source
1132         operand when two source operands are swapped.  Properly update
1133         destination when two source operands are swapped.
1134
1135 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
1136
1137         * gas.c (parse_args): Update copyright to 2011.
1138
1139 For older changes see ChangeLog-2010
1140 \f
1141 Local Variables:
1142 mode: change-log
1143 left-margin: 8
1144 fill-column: 74
1145 version-control: never
1146 End: