add symbol qualifiers for mach-o to bfd/gas

[thirdparty/binutils-gdb.git] / gas / config / obj-macho.c

/* Mach-O object file format
   Copyright 2009, 2011, 2012 Free Software Foundation, Inc.

   This file is part of GAS, the GNU Assembler.

   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as
   published by the Free Software Foundation; either version 3,
   or (at your option) any later version.

   GAS is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
   the GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */

/* Here we handle the mach-o directives that are common to all architectures.

   Most significant are mach-o named sections and a variety of symbol type
   decorations.  */

/* Mach-O supports multiple, named segments each of which may contain
   multiple named sections.  Thus the concept of subsectioning is 
   handled by (say) having a __TEXT segment with appropriate flags from
   which subsections are generated like __text, __const etc.  
   
   The well-known as short-hand section switch directives like .text, .data
   etc. are mapped onto predefined segment/section pairs using facilites
   supplied by the mach-o port of bfd.
   
   A number of additional mach-o short-hand section switch directives are
   also defined.  */

#define OBJ_HEADER "obj-macho.h"

#include "as.h"
#include "subsegs.h"
#include "symbols.h"
#include "write.h"
#include "mach-o.h"
#include "mach-o/loader.h"
#include "obj-macho.h"

/* Forward decls.  */
static segT obj_mach_o_segT_from_bfd_name (const char *, int);

/* TODO: Implement "-dynamic"/"-static" command line options.  */

static int obj_mach_o_is_static;

/* TODO: Implement the "-n" command line option to suppress the initial
   switch to the text segment.  */
static int obj_mach_o_start_with_text_section = 1;

/* Allow for special re-ordering on output.  */

static int obj_mach_o_seen_objc_section;

/* Start-up: At present, just create the sections we want.  */
void
mach_o_begin (void)
{
  /* Mach-O only defines the .text section by default, and even this can
     be suppressed by a flag.  In the latter event, the first code MUST
     be a section definition.  */
  if (obj_mach_o_start_with_text_section)
    {
      text_section = obj_mach_o_segT_from_bfd_name (TEXT_SECTION_NAME, 1);
      subseg_set (text_section, 0);
      if (obj_mach_o_is_static)
        {
          bfd_mach_o_section *mo_sec 
                        = bfd_mach_o_get_mach_o_section (text_section);
          mo_sec->flags &= ~BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS;
        }
    }
}

/* Remember the subsections_by_symbols state in case we need to reset
   the file flags.  */

static int obj_mach_o_subsections_by_symbols;

/* This will put at most 16 characters (terminated by a ',' or newline) from
   the input stream into dest.  If there are more than 16 chars before the
   delimiter, a warning is given and the string is truncated.  On completion of
   this function, input_line_pointer will point to the char after the ',' or 
   to the newline.  
   
   It trims leading and trailing space.  */

static int
collect_16char_name (char *dest, const char *msg, int require_comma)
{
  char c, *namstart;

  SKIP_WHITESPACE ();
  namstart = input_line_pointer;

  while ( (c = *input_line_pointer) != ',' 
         && !is_end_of_line[(unsigned char) c])
    input_line_pointer++;

  {
      int len = input_line_pointer - namstart; /* could be zero.  */
      /* lose any trailing space.  */  
      while (len > 0 && namstart[len-1] == ' ') 
        len--;
      if (len > 16)
        {
          *input_line_pointer = '\0'; /* make a temp string.  */
          as_bad (_("the %s name '%s' is too long (maximum 16 characters)"),
                     msg, namstart);
          *input_line_pointer = c; /* restore for printing.  */
          len = 16;
        }
      if (len > 0)
        memcpy (dest, namstart, len);
  }

  if (c != ',' && require_comma)
    {
      as_bad (_("expected a %s name followed by a `,'"), msg);
      return 1;
    }

  return 0;
}

static int
obj_mach_o_get_section_names (char *seg, char *sec,
                              unsigned segl, unsigned secl)
{
  /* Zero-length segment and section names are allowed.  */
  /* Parse segment name.  */
  memset (seg, 0, segl);
  if (collect_16char_name (seg, "segment", 1))
    {
      ignore_rest_of_line ();
      return 0;
    }
  input_line_pointer++; /* Skip the terminating ',' */

  /* Parse section name, which can be empty.  */
  memset (sec, 0, secl);
  collect_16char_name (sec, "section", 0);
  return 1;
}

/* Build (or get) a section from the mach-o description - which includes
   optional definitions for type, attributes, alignment and stub size.
   
   BFD supplies default values for sections which have a canonical name.  */

#define SECT_TYPE_SPECIFIED 0x0001
#define SECT_ATTR_SPECIFIED 0x0002
#define SECT_ALGN_SPECIFIED 0x0004

static segT
obj_mach_o_make_or_get_sect (char * segname, char * sectname,
                             unsigned int specified_mask, 
                             unsigned int usectype, unsigned int usecattr,
                             unsigned int ualign, offsetT stub_size)
{
  unsigned int sectype, secattr, secalign;
  flagword oldflags, flags;
  const char *name;
  segT sec;
  bfd_mach_o_section *msect;
  const mach_o_section_name_xlat *xlat;

  /* This provides default bfd flags and default mach-o section type and
     attributes along with the canonical name.  */
  xlat = bfd_mach_o_section_data_for_mach_sect (stdoutput, segname, sectname);

  /* TODO: more checking of whether overides are acually allowed.  */

  if (xlat != NULL)
    {
      name = xstrdup (xlat->bfd_name);
      sectype = xlat->macho_sectype;
      if (specified_mask & SECT_TYPE_SPECIFIED)
        {
          if ((sectype == BFD_MACH_O_S_ZEROFILL
               || sectype == BFD_MACH_O_S_GB_ZEROFILL)
              && sectype != usectype)
            as_bad (_("cannot overide zerofill section type for `%s,%s'"),
                    segname, sectname);
          else
            sectype = usectype;
        }
      secattr = xlat->macho_secattr;
      secalign = xlat->sectalign;
      flags = xlat->bfd_flags;
    }
  else
    {
      /* There is no normal BFD section name for this section.  Create one.
         The name created doesn't really matter as it will never be written
         on disk.  */
      size_t seglen = strlen (segname);
      size_t sectlen = strlen (sectname);
      char *n;

      n = xmalloc (seglen + 1 + sectlen + 1);
      memcpy (n, segname, seglen);
      n[seglen] = '.';
      memcpy (n + seglen + 1, sectname, sectlen);
      n[seglen + 1 + sectlen] = 0;
      name = n;
      if (specified_mask & SECT_TYPE_SPECIFIED)
        sectype = usectype;
      else
        sectype = BFD_MACH_O_S_REGULAR;
      secattr = BFD_MACH_O_S_ATTR_NONE;
      secalign = 0;
      flags = SEC_NO_FLAGS;
    }

  /* For now, just use what the user provided.  */

  if (specified_mask & SECT_ATTR_SPECIFIED)
    secattr = usecattr;

  if (specified_mask & SECT_ALGN_SPECIFIED)
    secalign = ualign;

  /* Sub-segments don't exists as is on Mach-O.  */
  sec = subseg_new (name, 0);

  oldflags = bfd_get_section_flags (stdoutput, sec);
  msect = bfd_mach_o_get_mach_o_section (sec);

  if (oldflags == SEC_NO_FLAGS)
    {
      /* New, so just use the defaults or what's specified.  */
      if (! bfd_set_section_flags (stdoutput, sec, flags))
        as_warn (_("failed to set flags for \"%s\": %s"),
                 bfd_section_name (stdoutput, sec),
                 bfd_errmsg (bfd_get_error ()));
 
      strncpy (msect->segname, segname, sizeof (msect->segname));
      strncpy (msect->sectname, sectname, sizeof (msect->sectname));

      msect->align = secalign;
      msect->flags = sectype | secattr;
      msect->reserved2 = stub_size;
      
      if (sectype == BFD_MACH_O_S_ZEROFILL
          || sectype == BFD_MACH_O_S_GB_ZEROFILL)
        seg_info (sec)->bss = 1;
    }
  else if (flags != SEC_NO_FLAGS)
    {
      if (flags != oldflags
          || msect->flags != (secattr | sectype))
        as_warn (_("Ignoring changed section attributes for %s"), name);
    }

  return sec;
}

/* .section

   The '.section' specification syntax looks like:
   .section <segment> , <section> [, type [, attribs [, size]]]

   White space is allowed everywhere between elements.

   <segment> and <section> may be from 0 to 16 chars in length - they may
   contain spaces but leading and trailing space will be trimmed.  It is 
   mandatory that they be present (or that zero-length names are indicated
   by ",,").

   There is only a single section type for any entry.

   There may be multiple attributes, they are delimited by `+'.

   Not all section types and attributes are accepted by the Darwin system
   assemblers as user-specifiable - although, at present, we do here.  */

static void
obj_mach_o_section (int ignore ATTRIBUTE_UNUSED)
{
  unsigned int sectype = BFD_MACH_O_S_REGULAR;
  unsigned int specified_mask = 0;
  unsigned int secattr = 0;
  offsetT sizeof_stub = 0;
  segT new_seg;
  char segname[17];
  char sectname[17];

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  /* Get the User's segment annd section names.  */
  if (! obj_mach_o_get_section_names (segname, sectname, 17, 17))
    return;

  /* Parse section type, if present.  */
  if (*input_line_pointer == ',')
    {
      char *p;
      char c;
      char tmpc;
      int len;
      input_line_pointer++;
      SKIP_WHITESPACE ();
      p = input_line_pointer;
      while ((c = *input_line_pointer) != ','
              && !is_end_of_line[(unsigned char) c])
        input_line_pointer++;

      len = input_line_pointer - p;
      /* strip trailing spaces.  */
      while (len > 0 && p[len-1] == ' ')
        len--;
      tmpc = p[len];

      /* Temporarily make a string from the token.  */
      p[len] = 0;
      sectype = bfd_mach_o_get_section_type_from_name (stdoutput, p);
      if (sectype > 255) /* Max Section ID == 255.  */
        {
          as_bad (_("unknown or invalid section type '%s'"), p);
          p[len] = tmpc;
          ignore_rest_of_line ();
          return;
        }
      else
        specified_mask |= SECT_TYPE_SPECIFIED;
      /* Restore.  */
      p[len] = tmpc;

      /* Parse attributes.
         TODO: check validity of attributes for section type.  */
      if ((specified_mask & SECT_TYPE_SPECIFIED)
          && c == ',')
        {
          do
            {
              int attr;

              /* Skip initial `,' and subsequent `+'.  */
              input_line_pointer++;
              SKIP_WHITESPACE ();
              p = input_line_pointer;
              while ((c = *input_line_pointer) != '+'
                      && c != ','
                      && !is_end_of_line[(unsigned char) c])
                input_line_pointer++;

              len = input_line_pointer - p;
              /* strip trailing spaces.  */
              while (len > 0 && p[len-1] == ' ')
                len--;
              tmpc = p[len];

              /* Temporarily make a string from the token.  */
              p[len] ='\0';
              attr = bfd_mach_o_get_section_attribute_from_name (p);
              if (attr == -1)
                {
                  as_bad (_("unknown or invalid section attribute '%s'"), p);
                  p[len] = tmpc;
                  ignore_rest_of_line ();
                  return;
                }
              else
                {
                  specified_mask |= SECT_ATTR_SPECIFIED;
                  secattr |= attr;
                }
              /* Restore.  */
              p[len] = tmpc;
            }
          while (*input_line_pointer == '+');

          /* Parse sizeof_stub.  */
          if ((specified_mask & SECT_ATTR_SPECIFIED) 
              && *input_line_pointer == ',')
            {
              if (sectype != BFD_MACH_O_S_SYMBOL_STUBS)
                {
                  as_bad (_("unexpected section size information"));
                  ignore_rest_of_line ();
                  return;
                }

              input_line_pointer++;
              sizeof_stub = get_absolute_expression ();
            }
          else if ((specified_mask & SECT_ATTR_SPECIFIED) 
                   && sectype == BFD_MACH_O_S_SYMBOL_STUBS)
            {
              as_bad (_("missing sizeof_stub expression"));
              ignore_rest_of_line ();
              return;
            }
        }
    }

  new_seg = obj_mach_o_make_or_get_sect (segname, sectname, specified_mask, 
                                         sectype, secattr, 0 /*align */,
                                         sizeof_stub);
  if (new_seg != NULL)
    {
      subseg_set (new_seg, 0);
      demand_empty_rest_of_line ();
    }
}

/* .zerofill segname, sectname [, symbolname, size [, align]]

   Zerofill switches, temporarily, to a sect of type 'zerofill'.

   If a variable name is given, it defines that in the section.
   Otherwise it just creates the section if it doesn't exist.  */

static void
obj_mach_o_zerofill (int ignore ATTRIBUTE_UNUSED)
{
  char segname[17];
  char sectname[17];
  segT old_seg = now_seg;
  segT new_seg;
  symbolS *sym = NULL;
  unsigned int align = 0;
  unsigned int specified_mask = 0;
  offsetT size;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  /* Get the User's segment annd section names.  */
  if (! obj_mach_o_get_section_names (segname, sectname, 17, 17))
    return;

  /* Parse variable definition, if present.  */
  if (*input_line_pointer == ',')
    {
      /* Parse symbol, size [.align] 
         We follow the method of s_common_internal, with the difference
         that the symbol cannot be a duplicate-common.  */
      char *name;
      char c;
      char *p;
      expressionS exp;
  
      input_line_pointer++; /* Skip ',' */
      SKIP_WHITESPACE ();
      name = input_line_pointer;
      c = get_symbol_end ();
      /* Just after name is now '\0'.  */
      p = input_line_pointer;
      *p = c;

      if (name == p)
        {
          as_bad (_("expected symbol name"));
          ignore_rest_of_line ();
          goto done;
        }

      SKIP_WHITESPACE ();  
      if (*input_line_pointer == ',')
        input_line_pointer++;

      expression_and_evaluate (&exp);
      if (exp.X_op != O_constant
          && exp.X_op != O_absent)
        {
            as_bad (_("bad or irreducible absolute expression"));
          ignore_rest_of_line ();
          goto done;
        }
      else if (exp.X_op == O_absent)
        {
          as_bad (_("missing size expression"));
          ignore_rest_of_line ();
          goto done;
        }

      size = exp.X_add_number;
      size &= ((offsetT) 2 << (stdoutput->arch_info->bits_per_address - 1)) - 1;
      if (exp.X_add_number != size || !exp.X_unsigned)
        {
          as_warn (_("size (%ld) out of range, ignored"),
                   (long) exp.X_add_number);
          ignore_rest_of_line ();
          goto done;
        }

     *p = 0; /* Make the name into a c string for err messages.  */
     sym = symbol_find_or_make (name);
     if (S_IS_DEFINED (sym) || symbol_equated_p (sym))
        {
          as_bad (_("symbol `%s' is already defined"), name);
          *p = c;
          ignore_rest_of_line ();
           goto done;
        }

      size = S_GET_VALUE (sym);
      if (size == 0)
        size = exp.X_add_number;
      else if (size != exp.X_add_number)
        as_warn (_("size of \"%s\" is already %ld; not changing to %ld"),
                   name, (long) size, (long) exp.X_add_number);

      *p = c;  /* Restore the termination char.  */
      
      SKIP_WHITESPACE ();  
      if (*input_line_pointer == ',')
        {
          align = (unsigned int) parse_align (0);
          if (align == (unsigned int) -1)
            {
              as_warn (_("align value not recognized, using size"));
              align = size;
            }
          if (align > 15)
            {
              as_warn (_("Alignment (%lu) too large: 15 assumed."),
                        (unsigned long)align);
              align = 15;
            }
          specified_mask |= SECT_ALGN_SPECIFIED;
        }
    }
 /* else just a section definition.  */

  specified_mask |= SECT_TYPE_SPECIFIED;
  new_seg = obj_mach_o_make_or_get_sect (segname, sectname, specified_mask, 
                                         BFD_MACH_O_S_ZEROFILL,
                                         BFD_MACH_O_S_ATTR_NONE,
                                         align, (offsetT) 0 /*stub size*/);
  if (new_seg == NULL)
    return;

  /* In case the user specifies the bss section by mach-o name.
     Create it on demand */
  if (strcmp (new_seg->name, BSS_SECTION_NAME) == 0
      && bss_section == NULL)
    bss_section = new_seg;

  subseg_set (new_seg, 0);

  if (sym != NULL)
    {
      char *pfrag;

      if (align)
        {
          record_alignment (new_seg, align);
          frag_align (align, 0, 0);
        }

      /* Detach from old frag.  */
      if (S_GET_SEGMENT (sym) == new_seg)
        symbol_get_frag (sym)->fr_symbol = NULL;

      symbol_set_frag (sym, frag_now);
      pfrag = frag_var (rs_org, 1, 1, 0, sym, size, NULL);
      *pfrag = 0;

      S_SET_SEGMENT (sym, new_seg);
      if (new_seg == bss_section)
        S_CLEAR_EXTERNAL (sym);
    }

done:
  /* switch back to the section that was current before the .zerofill.  */
  subseg_set (old_seg, 0);
}

static segT 
obj_mach_o_segT_from_bfd_name (const char *nam, int must_succeed)
{
  const mach_o_section_name_xlat *xlat;
  const char *segn;
  segT sec;

  /* BFD has tables of flags and default attributes for all the sections that
     have a 'canonical' name.  */
  xlat = bfd_mach_o_section_data_for_bfd_name (stdoutput, nam, &segn);
  if (xlat == NULL)
    {
      if (must_succeed)
        as_fatal (_("BFD is out of sync with GAS, "
                     "unhandled well-known section type `%s'"), nam);
      return NULL;
    }

  sec = bfd_get_section_by_name (stdoutput, nam);
  if (sec == NULL)
    {
      bfd_mach_o_section *msect;

      sec = subseg_force_new (xlat->bfd_name, 0);

      /* Set default type, attributes and alignment.  */
      msect = bfd_mach_o_get_mach_o_section (sec);
      msect->flags = xlat->macho_sectype | xlat->macho_secattr;
      msect->align = xlat->sectalign;

      if ((msect->flags & BFD_MACH_O_SECTION_TYPE_MASK) 
          == BFD_MACH_O_S_ZEROFILL)
        seg_info (sec)->bss = 1;
    }

  return sec;
}

static const char * const known_sections[] =
{
  /*  0 */ NULL,
  /* __TEXT */
  /*  1 */ ".const",
  /*  2 */ ".static_const",
  /*  3 */ ".cstring",
  /*  4 */ ".literal4",
  /*  5 */ ".literal8",
  /*  6 */ ".literal16",
  /*  7 */ ".constructor",
  /*  8 */ ".destructor",
  /*  9 */ ".eh_frame",
  /* __DATA */
  /* 10 */ ".const_data",
  /* 11 */ ".static_data",
  /* 12 */ ".mod_init_func",
  /* 13 */ ".mod_term_func",
  /* 14 */ ".dyld",
  /* 15 */ ".cfstring"
};

/* Interface for a known non-optional section directive.  */

static void
obj_mach_o_known_section (int sect_index)
{
  segT section;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  section = obj_mach_o_segT_from_bfd_name (known_sections[sect_index], 1);
  if (section != NULL)
    subseg_set (section, 0);

  /* else, we leave the section as it was; there was a fatal error anyway.  */
}

static const char * const objc_sections[] =
{
  /*  0 */ NULL,
  /*  1 */ ".objc_class",
  /*  2 */ ".objc_meta_class",
  /*  3 */ ".objc_cat_cls_meth",
  /*  4 */ ".objc_cat_inst_meth",
  /*  5 */ ".objc_protocol",
  /*  6 */ ".objc_string_object",
  /*  7 */ ".objc_cls_meth",
  /*  8 */ ".objc_inst_meth",
  /*  9 */ ".objc_cls_refs",
  /* 10 */ ".objc_message_refs",
  /* 11 */ ".objc_symbols",
  /* 12 */ ".objc_category",
  /* 13 */ ".objc_class_vars",
  /* 14 */ ".objc_instance_vars",
  /* 15 */ ".objc_module_info",
  /* 16 */ ".cstring", /* objc_class_names Alias for .cstring */
  /* 17 */ ".cstring", /* Alias objc_meth_var_types for .cstring */
  /* 18 */ ".cstring", /* objc_meth_var_names Alias for .cstring */
  /* 19 */ ".objc_selector_strs",
  /* 20 */ ".objc_image_info", /* extension.  */
  /* 21 */ ".objc_selector_fixup", /* extension.  */
  /* 22 */ ".objc1_class_ext", /* ObjC-1 extension.  */
  /* 23 */ ".objc1_property_list", /* ObjC-1 extension.  */
  /* 24 */ ".objc1_protocol_ext" /* ObjC-1 extension.  */
};

/* This currently does the same as known_sections, but kept separate for
   ease of maintenance.  */

static void
obj_mach_o_objc_section (int sect_index)
{
  segT section;
  
#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  section = obj_mach_o_segT_from_bfd_name (objc_sections[sect_index], 1);
  if (section != NULL)
    {
      obj_mach_o_seen_objc_section = 1; /* We need to ensure that certain
                                           sections are present and in the
                                           right order.  */
      subseg_set (section, 0);
    }

  /* else, we leave the section as it was; there was a fatal error anyway.  */
}

/* Debug section directives.  */

static const char * const debug_sections[] =
{
  /*  0 */ NULL,
  /* __DWARF */
  /*  1 */ ".debug_frame",
  /*  2 */ ".debug_info",
  /*  3 */ ".debug_abbrev",
  /*  4 */ ".debug_aranges",
  /*  5 */ ".debug_macinfo",
  /*  6 */ ".debug_line",
  /*  7 */ ".debug_loc",
  /*  8 */ ".debug_pubnames",
  /*  9 */ ".debug_pubtypes",
  /* 10 */ ".debug_str",
  /* 11 */ ".debug_ranges",
  /* 12 */ ".debug_macro"
};

/* ??? Maybe these should be conditional on gdwarf-*.
   It`s also likely that we will need to be able to set them from the cfi
   code.  */

static void
obj_mach_o_debug_section (int sect_index)
{
  segT section;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  section = obj_mach_o_segT_from_bfd_name (debug_sections[sect_index], 1);
  if (section != NULL)
    subseg_set (section, 0);

  /* else, we leave the section as it was; there was a fatal error anyway.  */
}

/* This could be moved to the tc-xx files, but there is so little dependency
   there, that the code might as well be shared.  */

struct opt_tgt_sect 
{
 const char *name;
 unsigned x86_val;
 unsigned ppc_val;
};

/* The extensions here are for specific sections that are generated by GCC
   and Darwin system tools, but don't have directives in the `system as'.  */

static const struct opt_tgt_sect tgt_sections[] =
{
  /*  0 */ { NULL, 0, 0},
  /*  1 */ { ".lazy_symbol_pointer", 0, 0},
  /*  2 */ { ".lazy_symbol_pointer2", 0, 0}, /* X86 - extension */
  /*  3 */ { ".lazy_symbol_pointer3", 0, 0}, /* X86 - extension */
  /*  4 */ { ".non_lazy_symbol_pointer", 0, 0},
  /*  5 */ { ".non_lazy_symbol_pointer_x86", 0, 0}, /* X86 - extension */
  /*  6 */ { ".symbol_stub", 16, 20},
  /*  7 */ { ".symbol_stub1", 0, 16}, /* PPC - extension */
  /*  8 */ { ".picsymbol_stub", 26, 36},
  /*  9 */ { ".picsymbol_stub1", 0, 32}, /* PPC - extension */
  /* 10 */ { ".picsymbol_stub2", 25, 0}, /* X86 - extension */
  /* 11 */ { ".picsymbol_stub3", 5, 0}, /* X86 - extension  */
};

/* Interface for an optional section directive.  */

static void
obj_mach_o_opt_tgt_section (int sect_index)
{
  const struct opt_tgt_sect *tgtsct = &tgt_sections[sect_index];
  segT section;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  section = obj_mach_o_segT_from_bfd_name (tgtsct->name, 0);
  if (section == NULL)
    {
      as_bad (_("%s is not used for the selected target"), tgtsct->name);
      /* Leave the section as it is.  */
    }
  else
    {
      bfd_mach_o_section *mo_sec = bfd_mach_o_get_mach_o_section (section);
      subseg_set (section, 0);
#if defined (TC_I386)
      mo_sec->reserved2 = tgtsct->x86_val;
#elif defined (TC_PPC)
      mo_sec->reserved2 = tgtsct->ppc_val;
#else
      mo_sec->reserved2 = 0;
#endif
    }
}

/* We don't necessarily have the three 'base' sections on mach-o.
   Normally, we would start up with only the 'text' section defined.
   However, even that can be suppressed with (TODO) c/l option "-n".
   Thus, we have to be able to create all three sections on-demand.  */

static void
obj_mach_o_base_section (int sect_index)
{
  segT section;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  /* We don't support numeric (or any other) qualifications on the
     well-known section shorthands.  */
  demand_empty_rest_of_line ();

  switch (sect_index)
    {
      /* Handle the three sections that are globally known within GAS.
         For Mach-O, these are created on demand rather than at startup.  */
      case 1:
        if (text_section == NULL)
          text_section = obj_mach_o_segT_from_bfd_name (TEXT_SECTION_NAME, 1);
        if (obj_mach_o_is_static)
          {
            bfd_mach_o_section *mo_sec
                = bfd_mach_o_get_mach_o_section (text_section);
            mo_sec->flags &= ~BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS;
          }
        section = text_section;
        break;
      case 2:
        if (data_section == NULL)
          data_section = obj_mach_o_segT_from_bfd_name (DATA_SECTION_NAME, 1);
        section = data_section;
        break;
      case 3:
        /* ??? maybe this achieves very little, as an addition.  */
        if (bss_section == NULL)
          {
            bss_section = obj_mach_o_segT_from_bfd_name (BSS_SECTION_NAME, 1);
            seg_info (bss_section)->bss = 1;
          }
        section = bss_section;
        break;
      default:
        as_fatal (_("internal error: base section index out of range"));
        return;
        break;
    }
  subseg_set (section, 0);
}

/* This finishes off parsing a .comm or .lcomm statement, which both can have
   an (optional) alignment field.  It also allows us to create the bss section
   on demand.  */

static symbolS *
obj_mach_o_common_parse (int is_local, symbolS *symbolP,
                         addressT size)
{
  addressT align = 0;
  bfd_mach_o_asymbol *s;

  SKIP_WHITESPACE ();  

  /* Both comm and lcomm take an optional alignment, as a power
     of two between 1 and 15.  */
  if (*input_line_pointer == ',')
    {
      /* We expect a power of 2.  */
      align = parse_align (0);
      if (align == (addressT) -1)
        return NULL;
      if (align > 15)
        {
          as_warn (_("Alignment (%lu) too large: 15 assumed."),
                  (unsigned long)align);
          align = 15;
        }
    }

  s = (bfd_mach_o_asymbol *) symbol_get_bfdsym (symbolP);
  if (is_local)
    {
      /* Create the BSS section on demand.  */
      if (bss_section == NULL)
        {
          bss_section = obj_mach_o_segT_from_bfd_name (BSS_SECTION_NAME, 1);
          seg_info (bss_section)->bss = 1;        
        }
      bss_alloc (symbolP, size, align);
      s->n_type = BFD_MACH_O_N_SECT;
      S_CLEAR_EXTERNAL (symbolP);
    }
  else
    {
      S_SET_VALUE (symbolP, size);
      S_SET_ALIGN (symbolP, align);
      S_SET_EXTERNAL (symbolP);
      S_SET_SEGMENT (symbolP, bfd_com_section_ptr);
      s->n_type = BFD_MACH_O_N_UNDF | BFD_MACH_O_N_EXT;
    }

  /* This is a data object (whatever we choose that to mean).  */
  s->symbol.flags |= BSF_OBJECT;

  /* We've set symbol qualifiers, so validate if you can.  */
  s->symbol.udata.i = SYM_MACHO_FIELDS_NOT_VALIDATED;

  return symbolP;
}

static void
obj_mach_o_comm (int is_local)
{
  s_comm_internal (is_local, obj_mach_o_common_parse);
}

/* Set properties that apply to the whole file.  At present, the only
   one defined, is subsections_via_symbols.  */

typedef enum obj_mach_o_file_properties {
  OBJ_MACH_O_FILE_PROP_NONE = 0,
  OBJ_MACH_O_FILE_PROP_SUBSECTS_VIA_SYMS,
  OBJ_MACH_O_FILE_PROP_MAX
} obj_mach_o_file_properties;

static void 
obj_mach_o_fileprop (int prop)
{
  if (prop < 0 || prop >= OBJ_MACH_O_FILE_PROP_MAX)
    as_fatal (_("internal error: bad file property ID %d"), prop);
    
  switch ((obj_mach_o_file_properties) prop)
    {
      case OBJ_MACH_O_FILE_PROP_SUBSECTS_VIA_SYMS:
        obj_mach_o_subsections_by_symbols = 1;
        if (!bfd_set_private_flags (stdoutput, 
                                    BFD_MACH_O_MH_SUBSECTIONS_VIA_SYMBOLS))
          as_bad (_("failed to set subsections by symbols"));
        demand_empty_rest_of_line ();
        break;
      default:
        break;
    }
}

/* Temporary markers for symbol reference data.  
   Lazy will remain in place.  */
#define LAZY 0x01
#define REFE 0x02

/* We have a bunch of qualifiers that may be applied to symbols.
   .globl is handled here so that we might make sure that conflicting qualifiers
   are caught where possible.  */

typedef enum obj_mach_o_symbol_type {
  OBJ_MACH_O_SYM_UNK = 0,
  OBJ_MACH_O_SYM_LOCAL = 1,
  OBJ_MACH_O_SYM_GLOBL = 2,
  OBJ_MACH_O_SYM_REFERENCE = 3,
  OBJ_MACH_O_SYM_WEAK_REF = 4,
  OBJ_MACH_O_SYM_LAZY_REF = 5,
  OBJ_MACH_O_SYM_WEAK_DEF = 6,
  OBJ_MACH_O_SYM_PRIV_EXT = 7,
  OBJ_MACH_O_SYM_NO_DEAD_STRIP = 8,
  OBJ_MACH_O_SYM_WEAK = 9
} obj_mach_o_symbol_type;

/* Set Mach-O-specific symbol qualifiers. */

static int
obj_mach_o_set_symbol_qualifier (symbolS *sym, int type)
{
  int is_defined;
  bfd_mach_o_asymbol *s = (bfd_mach_o_asymbol *) symbol_get_bfdsym (sym);
  bfd_mach_o_section *sec;
  int sectype = -1;
  int err = 0;

  /* If the symbol is defined, then we can do more rigorous checking on
     the validity of the qualifiers.  Otherwise, we are stuck with waiting 
     until it's defined - or until write the file.
     
     In certain cases (e.g. when a symbol qualifier is intended to introduce
     an undefined symbol in a stubs section) we should check that the current
     section is appropriate to the qualifier.  */

  is_defined = s->symbol.section != bfd_und_section_ptr;
  if (is_defined)
    sec = bfd_mach_o_get_mach_o_section (s->symbol.section) ;
  else
    sec = bfd_mach_o_get_mach_o_section (now_seg) ;

  if (sec != NULL)
    sectype = sec->flags & BFD_MACH_O_SECTION_TYPE_MASK;

  switch ((obj_mach_o_symbol_type) type)
    {
      case OBJ_MACH_O_SYM_LOCAL:
        /* This is an extension over the system tools.  */
        if (s->n_type & (BFD_MACH_O_N_PEXT | BFD_MACH_O_N_EXT))
          {
            as_bad (_("'%s' previously declared as '%s'."), s->symbol.name,
                      (s->n_type & BFD_MACH_O_N_PEXT) ? "private extern"
                                                      : "global" );
            err = 1;
          }
        else
          {
            s->n_type &= ~BFD_MACH_O_N_EXT;
            S_CLEAR_EXTERNAL (sym);
          }
        break;

      case OBJ_MACH_O_SYM_PRIV_EXT:
        s->n_type |= BFD_MACH_O_N_PEXT ;
        /* We follow the system tools in marking PEXT as also global.  */
        /* Fall through.  */

      case OBJ_MACH_O_SYM_GLOBL:
        /* It's not an error to define a symbol and then make it global.  */
        s->n_type |= BFD_MACH_O_N_EXT;
        S_SET_EXTERNAL (sym);
        break;

      case OBJ_MACH_O_SYM_REFERENCE:
        if (is_defined)
          s->n_desc |= BFD_MACH_O_N_NO_DEAD_STRIP;
        else
          s->n_desc |= (REFE | BFD_MACH_O_N_NO_DEAD_STRIP);
        break;

      case OBJ_MACH_O_SYM_LAZY_REF:
        if (is_defined)
          s->n_desc |= BFD_MACH_O_N_NO_DEAD_STRIP;
        else
          s->n_desc |= (REFE | LAZY | BFD_MACH_O_N_NO_DEAD_STRIP);
        break;

      /* Force ld to retain the symbol - even if it appears unused.  */
      case OBJ_MACH_O_SYM_NO_DEAD_STRIP:
        s->n_desc |= BFD_MACH_O_N_NO_DEAD_STRIP ;
        break;

      /* Mach-O's idea of weak ...  */
      case OBJ_MACH_O_SYM_WEAK_REF:
        s->n_desc |= BFD_MACH_O_N_WEAK_REF ;
        break;

      case OBJ_MACH_O_SYM_WEAK_DEF:
        if (is_defined && sectype != BFD_MACH_O_S_COALESCED)
          {
            as_bad (_("'%s' can't be a weak_definition (currently only"
                      " supported in sections of type coalesced)"),
                      s->symbol.name);
            err = 1;
          }
        else
          s->n_desc |= BFD_MACH_O_N_WEAK_DEF;
        break;

      case OBJ_MACH_O_SYM_WEAK:
        /* A generic 'weak' - we try to figure out what it means at
           symbol frob time.  */
        S_SET_WEAK (sym);
        break;

      default:
        break;
    }

    /* We've seen some kind of qualifier - check validity if or when the entity
     is defined.  */
  s->symbol.udata.i = SYM_MACHO_FIELDS_NOT_VALIDATED;
  return err;
}

/* Respond to symbol qualifiers.
   All of the form:
   .<qualifier> symbol [, symbol]*
   a list of symbols is an extension over the Darwin system as.  */

static void
obj_mach_o_sym_qual (int ntype)
{
  char *name;
  char c;
  symbolS *symbolP;

#ifdef md_flush_pending_output
  md_flush_pending_output ();
#endif

  do
    {
      name = input_line_pointer;
      c = get_symbol_end ();
      symbolP = symbol_find_or_make (name);
      obj_mach_o_set_symbol_qualifier (symbolP, ntype);
      *input_line_pointer = c;
      SKIP_WHITESPACE ();
      c = *input_line_pointer;
      if (c == ',')
        {
          input_line_pointer++;
          SKIP_WHITESPACE ();
          if (is_end_of_line[(unsigned char) *input_line_pointer])
            c = '\n';
        }
    }
  while (c == ',');

  demand_empty_rest_of_line ();
}

/* Dummy function to allow test-code to work while we are working
   on things.  */

static void
obj_mach_o_placeholder (int arg ATTRIBUTE_UNUSED)
{
  ignore_rest_of_line ();
}

const pseudo_typeS mach_o_pseudo_table[] =
{
  /* Section directives.  */
  { "comm", obj_mach_o_comm, 0 },
  { "lcomm", obj_mach_o_comm, 1 },

  { "text", obj_mach_o_base_section, 1},
  { "data", obj_mach_o_base_section, 2},
  { "bss", obj_mach_o_base_section, 3},   /* extension */

  { "const", obj_mach_o_known_section, 1},
  { "static_const", obj_mach_o_known_section, 2},
  { "cstring", obj_mach_o_known_section, 3},
  { "literal4", obj_mach_o_known_section, 4},
  { "literal8", obj_mach_o_known_section, 5},
  { "literal16", obj_mach_o_known_section, 6},
  { "constructor", obj_mach_o_known_section, 7},
  { "destructor", obj_mach_o_known_section, 8},
  { "eh_frame", obj_mach_o_known_section, 9},

  { "const_data", obj_mach_o_known_section, 10},
  { "static_data", obj_mach_o_known_section, 11},
  { "mod_init_func", obj_mach_o_known_section, 12},
  { "mod_term_func", obj_mach_o_known_section, 13},
  { "dyld", obj_mach_o_known_section, 14},
  { "cfstring", obj_mach_o_known_section, 15},

  { "objc_class", obj_mach_o_objc_section, 1},
  { "objc_meta_class", obj_mach_o_objc_section, 2},
  { "objc_cat_cls_meth", obj_mach_o_objc_section, 3},
  { "objc_cat_inst_meth", obj_mach_o_objc_section, 4},
  { "objc_protocol", obj_mach_o_objc_section, 5},
  { "objc_string_object", obj_mach_o_objc_section, 6},
  { "objc_cls_meth", obj_mach_o_objc_section, 7},
  { "objc_inst_meth", obj_mach_o_objc_section, 8},
  { "objc_cls_refs", obj_mach_o_objc_section, 9},
  { "objc_message_refs", obj_mach_o_objc_section, 10},
  { "objc_symbols", obj_mach_o_objc_section, 11},
  { "objc_category", obj_mach_o_objc_section, 12},
  { "objc_class_vars", obj_mach_o_objc_section, 13},
  { "objc_instance_vars", obj_mach_o_objc_section, 14},
  { "objc_module_info", obj_mach_o_objc_section, 15},
  { "objc_class_names", obj_mach_o_objc_section, 16}, /* Alias for .cstring */
  { "objc_meth_var_types", obj_mach_o_objc_section, 17}, /* Alias for .cstring */
  { "objc_meth_var_names", obj_mach_o_objc_section, 18}, /* Alias for .cstring */
  { "objc_selector_strs", obj_mach_o_objc_section, 19},
  { "objc_image_info", obj_mach_o_objc_section, 20}, /* extension.  */
  { "objc_selector_fixup", obj_mach_o_objc_section, 21}, /* extension.  */
  { "objc1_class_ext", obj_mach_o_objc_section, 22}, /* ObjC-1 extension.  */
  { "objc1_property_list", obj_mach_o_objc_section, 23}, /* ObjC-1 extension.  */
  { "objc1_protocol_ext", obj_mach_o_objc_section, 24}, /* ObjC-1 extension.  */

  { "debug_frame", obj_mach_o_debug_section, 1}, /* extension.  */
  { "debug_info", obj_mach_o_debug_section, 2}, /* extension.  */
  { "debug_abbrev", obj_mach_o_debug_section, 3}, /* extension.  */
  { "debug_aranges", obj_mach_o_debug_section, 4}, /* extension.  */
  { "debug_macinfo", obj_mach_o_debug_section, 5}, /* extension.  */
  { "debug_line", obj_mach_o_debug_section, 6}, /* extension.  */
  { "debug_loc", obj_mach_o_debug_section, 7}, /* extension.  */
  { "debug_pubnames", obj_mach_o_debug_section, 8}, /* extension.  */
  { "debug_pubtypes", obj_mach_o_debug_section, 9}, /* extension.  */
  { "debug_str", obj_mach_o_debug_section, 10}, /* extension.  */
  { "debug_ranges", obj_mach_o_debug_section, 11}, /* extension.  */
  { "debug_macro", obj_mach_o_debug_section, 12}, /* extension.  */
  
  { "lazy_symbol_pointer", obj_mach_o_opt_tgt_section, 1},
  { "lazy_symbol_pointer2", obj_mach_o_opt_tgt_section, 2}, /* extension.  */
  { "lazy_symbol_pointer3", obj_mach_o_opt_tgt_section, 3}, /* extension.  */
  { "non_lazy_symbol_pointer", obj_mach_o_opt_tgt_section, 4},
  { "non_lazy_symbol_pointer_x86", obj_mach_o_opt_tgt_section, 5}, /* extension.  */
  { "symbol_stub", obj_mach_o_opt_tgt_section, 6},
  { "symbol_stub1", obj_mach_o_opt_tgt_section, 7}, /* extension.  */
  { "picsymbol_stub", obj_mach_o_opt_tgt_section, 8}, /* extension.  */
  { "picsymbol_stub1", obj_mach_o_opt_tgt_section, 9}, /* extension.  */
  { "picsymbol_stub2", obj_mach_o_opt_tgt_section, 4}, /* extension.  */
  { "picsymbol_stub3", obj_mach_o_opt_tgt_section, 4}, /* extension.  */

  { "section", obj_mach_o_section, 0},
  { "zerofill", obj_mach_o_zerofill, 0},

  /* Symbol qualifiers.  */
  {"local",             obj_mach_o_sym_qual, OBJ_MACH_O_SYM_LOCAL},
  {"globl",             obj_mach_o_sym_qual, OBJ_MACH_O_SYM_GLOBL},
  {"reference",         obj_mach_o_sym_qual, OBJ_MACH_O_SYM_REFERENCE},
  {"weak_reference",    obj_mach_o_sym_qual, OBJ_MACH_O_SYM_WEAK_REF},
  {"lazy_reference",    obj_mach_o_sym_qual, OBJ_MACH_O_SYM_LAZY_REF},
  {"weak_definition",   obj_mach_o_sym_qual, OBJ_MACH_O_SYM_WEAK_DEF},
  {"private_extern",    obj_mach_o_sym_qual, OBJ_MACH_O_SYM_PRIV_EXT},
  {"no_dead_strip",     obj_mach_o_sym_qual, OBJ_MACH_O_SYM_NO_DEAD_STRIP},
  {"weak",              obj_mach_o_sym_qual, OBJ_MACH_O_SYM_WEAK}, /* ext */

  {"indirect_symbol",   obj_mach_o_placeholder, 0},

  /* File flags.  */
  { "subsections_via_symbols", obj_mach_o_fileprop, 
                               OBJ_MACH_O_FILE_PROP_SUBSECTS_VIA_SYMS},

  {NULL, NULL, 0}
};

/* Determine the default n_type value for a symbol from its section.  */

static unsigned
obj_mach_o_type_for_symbol (bfd_mach_o_asymbol *s)
{
  if (s->symbol.section == bfd_abs_section_ptr)
    return BFD_MACH_O_N_ABS;
  else if (s->symbol.section == bfd_com_section_ptr
           || s->symbol.section == bfd_und_section_ptr)
    return BFD_MACH_O_N_UNDF;
  else
    return BFD_MACH_O_N_SECT;
}

/* We need to check the correspondence between some kinds of symbols and their
   sections.  Common and BSS vars will seen via the obj_macho_comm() function.
   
   The earlier we can pick up a problem, the better the diagnostics will be.
   
   However, when symbol type information is attached, the symbol section will
   quite possibly be unknown.  So we are stuck with checking (most of the)
   validity at the time the file is written (unfortunately, then one doesn't
   get line number information in the diagnostic).  */

/* Here we pick up the case where symbol qualifiers have been applied that
   are possibly incompatible with the section etc. that the symbol is defined
   in.  */

void obj_macho_frob_label (struct symbol *sp)
{
  bfd_mach_o_asymbol *s = (bfd_mach_o_asymbol *) symbol_get_bfdsym (sp);
  /* This is the base symbol type, that we mask in.  */
  unsigned base_type = obj_mach_o_type_for_symbol (s);
  bfd_mach_o_section *sec = bfd_mach_o_get_mach_o_section (s->symbol.section);
  int sectype = -1;

  if ((s->n_type & BFD_MACH_O_N_STAB) != 0)
    return; /* Leave alone.  */
  
  if (sec != NULL)
    sectype = sec->flags & BFD_MACH_O_SECTION_TYPE_MASK;

  /* If there is a pre-existing qualifier, we can make some checks about
     validity now.  */

  if(s->symbol.udata.i == SYM_MACHO_FIELDS_NOT_VALIDATED)
    {
      if ((s->n_desc & BFD_MACH_O_N_WEAK_DEF)
          && sectype != BFD_MACH_O_S_COALESCED)
        as_bad (_("'%s' can't be a weak_definition (currently only supported"
                  " in sections of type coalesced)"), s->symbol.name);

      /* Have we changed from an undefined to defined ref? */
      s->n_desc &= ~(REFE | LAZY);
    }

  s->n_type &= ~BFD_MACH_O_N_TYPE;
  s->n_type |= base_type;
}

/* This is the fall-back, we come here when we get to the end of the file and
   the symbol is not defined - or there are combinations of qualifiers required
   (e.g. global + weak_def).  */

int
obj_macho_frob_symbol (struct symbol *sp)
{
  bfd_mach_o_asymbol *s = (bfd_mach_o_asymbol *) symbol_get_bfdsym (sp);
  unsigned base_type = obj_mach_o_type_for_symbol (s);
  bfd_mach_o_section *sec = bfd_mach_o_get_mach_o_section (s->symbol.section);
  int sectype = -1;
  
  if (sec != NULL)
    sectype = sec->flags & BFD_MACH_O_SECTION_TYPE_MASK;

  if ((s->n_type & BFD_MACH_O_N_STAB) != 0)
    return 0; /* Leave alone.  */
  else if (s->symbol.section == bfd_und_section_ptr)
    {
      /* ??? Do we really gain much from implementing this as well as the
         mach-o specific ones?  */
      if (s->symbol.flags & BSF_WEAK)
        s->n_desc |= BFD_MACH_O_N_WEAK_REF;

      /* Undefined references, become extern.  */
      if (s->n_desc & REFE)
        {
          s->n_desc &= ~REFE;
          s->n_type |= BFD_MACH_O_N_EXT;
        }

      /* So do undefined 'no_dead_strip's.  */
      if (s->n_desc & BFD_MACH_O_N_NO_DEAD_STRIP)
        s->n_type |= BFD_MACH_O_N_EXT;

    }
  else
    {
      if ((s->symbol.flags & BSF_WEAK)
           && (sectype == BFD_MACH_O_S_COALESCED)
           && (s->n_type & (BFD_MACH_O_N_PEXT | BFD_MACH_O_N_EXT)))
        s->n_desc |= BFD_MACH_O_N_WEAK_DEF;
/* ??? we should do this - but then that reveals that the semantics of weak
       are different from what's supported in mach-o object files.
      else
        as_bad (_("'%s' can't be a weak_definition."),
                s->symbol.name); */
    }

  if (s->symbol.udata.i == SYM_MACHO_FIELDS_UNSET)
    {
      /* Anything here that should be added that is non-standard.  */
      s->n_desc &= ~BFD_MACH_O_REFERENCE_MASK;
    }    
  else if (s->symbol.udata.i == SYM_MACHO_FIELDS_NOT_VALIDATED)
    {
      /* Try to validate any combinations.  */
      if (s->n_desc & BFD_MACH_O_N_WEAK_DEF)
        {
          if (s->symbol.section == bfd_und_section_ptr)
            as_bad (_("'%s' can't be a weak_definition (since it is"
                      " undefined)"), s->symbol.name);
          else if (sectype != BFD_MACH_O_S_COALESCED)
            as_bad (_("'%s' can't be a weak_definition (currently only supported"
                      " in sections of type coalesced)"), s->symbol.name);
          else if (! (s->n_type & (BFD_MACH_O_N_PEXT | BFD_MACH_O_N_EXT)))
            as_bad (_("Non-global symbol: '%s' can't be a weak_definition."),
                    s->symbol.name);
        }

    }
  else
    as_bad (_("internal error: [%s] unexpected code [%lx] in frob symbol"),
            s->symbol.name, (unsigned long)s->symbol.udata.i);

  s->n_type &= ~BFD_MACH_O_N_TYPE;
  s->n_type |= base_type;

  if (s->symbol.flags & BSF_GLOBAL)
    s->n_type |= BFD_MACH_O_N_EXT;

  /* This cuts both ways - we promote some things to external above.  */
  if (s->n_type & (BFD_MACH_O_N_PEXT | BFD_MACH_O_N_EXT))
    S_SET_EXTERNAL (sp);

  return 0;
}

/* Support stabs for mach-o.  */

void
obj_mach_o_process_stab (int what, const char *string,
                         int type, int other, int desc)
{
  symbolS *symbolP;
  bfd_mach_o_asymbol *s;

  switch (what)
    {
      case 'd':
        symbolP = symbol_new ("", now_seg, frag_now_fix (), frag_now);
        /* Special stabd NULL name indicator.  */
        S_SET_NAME (symbolP, NULL);
        break;

      case 'n':
      case 's':
        symbolP = symbol_new (string, undefined_section, (valueT) 0,
                              &zero_address_frag);
        pseudo_set (symbolP);
        break;

      default:
        as_bad(_("unrecognized stab type '%c'"), (char)what);
        abort ();
        break;
    }

  s = (bfd_mach_o_asymbol *) symbol_get_bfdsym (symbolP);
  s->n_type = type;
  s->n_desc = desc;
  /* For stabd, this will eventually get overwritten by the section number.  */
  s->n_sect = other;

  /* It's a debug symbol.  */
  s->symbol.flags |= BSF_DEBUGGING;
}