]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - gas/config/tc-riscv.c
gas/riscv: Remove unneeded structure
[thirdparty/binutils-gdb.git] / gas / config / tc-riscv.c
1 /* tc-riscv.c -- RISC-V assembler
2 Copyright (C) 2011-2019 Free Software Foundation, Inc.
3
4 Contributed by Andrew Waterman (andrew@sifive.com).
5 Based on MIPS target.
6
7 This file is part of GAS.
8
9 GAS is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3, or (at your option)
12 any later version.
13
14 GAS is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; see the file COPYING3. If not,
21 see <http://www.gnu.org/licenses/>. */
22
23 #include "as.h"
24 #include "config.h"
25 #include "subsegs.h"
26 #include "safe-ctype.h"
27
28 #include "itbl-ops.h"
29 #include "dwarf2dbg.h"
30 #include "dw2gencfi.h"
31
32 #include "bfd/elfxx-riscv.h"
33 #include "elf/riscv.h"
34 #include "opcode/riscv.h"
35
36 #include <stdint.h>
37
38 /* Information about an instruction, including its format, operands
39 and fixups. */
40 struct riscv_cl_insn
41 {
42 /* The opcode's entry in riscv_opcodes. */
43 const struct riscv_opcode *insn_mo;
44
45 /* The encoded instruction bits. */
46 insn_t insn_opcode;
47
48 /* The frag that contains the instruction. */
49 struct frag *frag;
50
51 /* The offset into FRAG of the first instruction byte. */
52 long where;
53
54 /* The relocs associated with the instruction, if any. */
55 fixS *fixp;
56 };
57
58 #ifndef DEFAULT_ARCH
59 #define DEFAULT_ARCH "riscv64"
60 #endif
61
62 #ifndef DEFAULT_RISCV_ATTR
63 #define DEFAULT_RISCV_ATTR 0
64 #endif
65
66 static const char default_arch[] = DEFAULT_ARCH;
67
68 static unsigned xlen = 0; /* width of an x-register */
69 static unsigned abi_xlen = 0; /* width of a pointer in the ABI */
70 static bfd_boolean rve_abi = FALSE;
71
72 #define LOAD_ADDRESS_INSN (abi_xlen == 64 ? "ld" : "lw")
73 #define ADD32_INSN (xlen == 64 ? "addiw" : "addi")
74
75 static unsigned elf_flags = 0;
76
77 /* This is the set of options which the .option pseudo-op may modify. */
78
79 struct riscv_set_options
80 {
81 int pic; /* Generate position-independent code. */
82 int rvc; /* Generate RVC code. */
83 int rve; /* Generate RVE code. */
84 int relax; /* Emit relocs the linker is allowed to relax. */
85 int arch_attr; /* Emit arch attribute. */
86 };
87
88 static struct riscv_set_options riscv_opts =
89 {
90 0, /* pic */
91 0, /* rvc */
92 0, /* rve */
93 1, /* relax */
94 DEFAULT_RISCV_ATTR, /* arch_attr */
95 };
96
97 static void
98 riscv_set_rvc (bfd_boolean rvc_value)
99 {
100 if (rvc_value)
101 elf_flags |= EF_RISCV_RVC;
102
103 riscv_opts.rvc = rvc_value;
104 }
105
106 static void
107 riscv_set_rve (bfd_boolean rve_value)
108 {
109 riscv_opts.rve = rve_value;
110 }
111
112 static riscv_subset_list_t riscv_subsets;
113
114 static bfd_boolean
115 riscv_subset_supports (const char *feature)
116 {
117 if (riscv_opts.rvc && (strcasecmp (feature, "c") == 0))
118 return TRUE;
119
120 return riscv_lookup_subset (&riscv_subsets, feature) != NULL;
121 }
122
123 static bfd_boolean
124 riscv_multi_subset_supports (enum riscv_insn_class insn_class)
125 {
126 switch (insn_class)
127 {
128 case INSN_CLASS_I: return riscv_subset_supports ("i");
129 case INSN_CLASS_C: return riscv_subset_supports ("c");
130 case INSN_CLASS_A: return riscv_subset_supports ("a");
131 case INSN_CLASS_M: return riscv_subset_supports ("m");
132 case INSN_CLASS_F: return riscv_subset_supports ("f");
133 case INSN_CLASS_D: return riscv_subset_supports ("d");
134 case INSN_CLASS_D_AND_C:
135 return riscv_subset_supports ("d") && riscv_subset_supports ("c");
136
137 case INSN_CLASS_F_AND_C:
138 return riscv_subset_supports ("f") && riscv_subset_supports ("c");
139
140 case INSN_CLASS_Q: return riscv_subset_supports ("q");
141
142 default:
143 as_fatal ("Unreachable");
144 return FALSE;
145 }
146 }
147
148 /* Set which ISA and extensions are available. */
149
150 static void
151 riscv_set_arch (const char *s)
152 {
153 riscv_parse_subset_t rps;
154 rps.subset_list = &riscv_subsets;
155 rps.error_handler = as_fatal;
156 rps.xlen = &xlen;
157
158 riscv_release_subset_list (&riscv_subsets);
159 riscv_parse_subset (&rps, s);
160 }
161
162 /* Handle of the OPCODE hash table. */
163 static struct hash_control *op_hash = NULL;
164
165 /* Handle of the type of .insn hash table. */
166 static struct hash_control *insn_type_hash = NULL;
167
168 /* This array holds the chars that always start a comment. If the
169 pre-processor is disabled, these aren't very useful */
170 const char comment_chars[] = "#";
171
172 /* This array holds the chars that only start a comment at the beginning of
173 a line. If the line seems to have the form '# 123 filename'
174 .line and .file directives will appear in the pre-processed output */
175 /* Note that input_file.c hand checks for '#' at the beginning of the
176 first line of the input file. This is because the compiler outputs
177 #NO_APP at the beginning of its output. */
178 /* Also note that C style comments are always supported. */
179 const char line_comment_chars[] = "#";
180
181 /* This array holds machine specific line separator characters. */
182 const char line_separator_chars[] = ";";
183
184 /* Chars that can be used to separate mant from exp in floating point nums */
185 const char EXP_CHARS[] = "eE";
186
187 /* Chars that mean this number is a floating point constant */
188 /* As in 0f12.456 */
189 /* or 0d1.2345e12 */
190 const char FLT_CHARS[] = "rRsSfFdDxXpP";
191
192 /* Indicate we are already assemble any instructions or not. */
193 static bfd_boolean start_assemble = FALSE;
194
195 /* Indicate arch attribute is explictly set. */
196 static bfd_boolean explicit_arch_attr = FALSE;
197
198 /* Macros for encoding relaxation state for RVC branches and far jumps. */
199 #define RELAX_BRANCH_ENCODE(uncond, rvc, length) \
200 ((relax_substateT) \
201 (0xc0000000 \
202 | ((uncond) ? 1 : 0) \
203 | ((rvc) ? 2 : 0) \
204 | ((length) << 2)))
205 #define RELAX_BRANCH_P(i) (((i) & 0xf0000000) == 0xc0000000)
206 #define RELAX_BRANCH_LENGTH(i) (((i) >> 2) & 0xF)
207 #define RELAX_BRANCH_RVC(i) (((i) & 2) != 0)
208 #define RELAX_BRANCH_UNCOND(i) (((i) & 1) != 0)
209
210 /* Is the given value a sign-extended 32-bit value? */
211 #define IS_SEXT_32BIT_NUM(x) \
212 (((x) &~ (offsetT) 0x7fffffff) == 0 \
213 || (((x) &~ (offsetT) 0x7fffffff) == ~ (offsetT) 0x7fffffff))
214
215 /* Is the given value a zero-extended 32-bit value? Or a negated one? */
216 #define IS_ZEXT_32BIT_NUM(x) \
217 (((x) &~ (offsetT) 0xffffffff) == 0 \
218 || (((x) &~ (offsetT) 0xffffffff) == ~ (offsetT) 0xffffffff))
219
220 /* Change INSN's opcode so that the operand given by FIELD has value VALUE.
221 INSN is a riscv_cl_insn structure and VALUE is evaluated exactly once. */
222 #define INSERT_OPERAND(FIELD, INSN, VALUE) \
223 INSERT_BITS ((INSN).insn_opcode, VALUE, OP_MASK_##FIELD, OP_SH_##FIELD)
224
225 /* Determine if an instruction matches an opcode. */
226 #define OPCODE_MATCHES(OPCODE, OP) \
227 (((OPCODE) & MASK_##OP) == MATCH_##OP)
228
229 static char *expr_end;
230
231 /* The default target format to use. */
232
233 const char *
234 riscv_target_format (void)
235 {
236 return xlen == 64 ? "elf64-littleriscv" : "elf32-littleriscv";
237 }
238
239 /* Return the length of instruction INSN. */
240
241 static inline unsigned int
242 insn_length (const struct riscv_cl_insn *insn)
243 {
244 return riscv_insn_length (insn->insn_opcode);
245 }
246
247 /* Initialise INSN from opcode entry MO. Leave its position unspecified. */
248
249 static void
250 create_insn (struct riscv_cl_insn *insn, const struct riscv_opcode *mo)
251 {
252 insn->insn_mo = mo;
253 insn->insn_opcode = mo->match;
254 insn->frag = NULL;
255 insn->where = 0;
256 insn->fixp = NULL;
257 }
258
259 /* Install INSN at the location specified by its "frag" and "where" fields. */
260
261 static void
262 install_insn (const struct riscv_cl_insn *insn)
263 {
264 char *f = insn->frag->fr_literal + insn->where;
265 md_number_to_chars (f, insn->insn_opcode, insn_length (insn));
266 }
267
268 /* Move INSN to offset WHERE in FRAG. Adjust the fixups accordingly
269 and install the opcode in the new location. */
270
271 static void
272 move_insn (struct riscv_cl_insn *insn, fragS *frag, long where)
273 {
274 insn->frag = frag;
275 insn->where = where;
276 if (insn->fixp != NULL)
277 {
278 insn->fixp->fx_frag = frag;
279 insn->fixp->fx_where = where;
280 }
281 install_insn (insn);
282 }
283
284 /* Add INSN to the end of the output. */
285
286 static void
287 add_fixed_insn (struct riscv_cl_insn *insn)
288 {
289 char *f = frag_more (insn_length (insn));
290 move_insn (insn, frag_now, f - frag_now->fr_literal);
291 }
292
293 static void
294 add_relaxed_insn (struct riscv_cl_insn *insn, int max_chars, int var,
295 relax_substateT subtype, symbolS *symbol, offsetT offset)
296 {
297 frag_grow (max_chars);
298 move_insn (insn, frag_now, frag_more (0) - frag_now->fr_literal);
299 frag_var (rs_machine_dependent, max_chars, var,
300 subtype, symbol, offset, NULL);
301 }
302
303 /* Compute the length of a branch sequence, and adjust the stored length
304 accordingly. If FRAGP is NULL, the worst-case length is returned. */
305
306 static unsigned
307 relaxed_branch_length (fragS *fragp, asection *sec, int update)
308 {
309 int jump, rvc, length = 8;
310
311 if (!fragp)
312 return length;
313
314 jump = RELAX_BRANCH_UNCOND (fragp->fr_subtype);
315 rvc = RELAX_BRANCH_RVC (fragp->fr_subtype);
316 length = RELAX_BRANCH_LENGTH (fragp->fr_subtype);
317
318 /* Assume jumps are in range; the linker will catch any that aren't. */
319 length = jump ? 4 : 8;
320
321 if (fragp->fr_symbol != NULL
322 && S_IS_DEFINED (fragp->fr_symbol)
323 && !S_IS_WEAK (fragp->fr_symbol)
324 && sec == S_GET_SEGMENT (fragp->fr_symbol))
325 {
326 offsetT val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
327 bfd_vma rvc_range = jump ? RVC_JUMP_REACH : RVC_BRANCH_REACH;
328 val -= fragp->fr_address + fragp->fr_fix;
329
330 if (rvc && (bfd_vma)(val + rvc_range/2) < rvc_range)
331 length = 2;
332 else if ((bfd_vma)(val + RISCV_BRANCH_REACH/2) < RISCV_BRANCH_REACH)
333 length = 4;
334 else if (!jump && rvc)
335 length = 6;
336 }
337
338 if (update)
339 fragp->fr_subtype = RELAX_BRANCH_ENCODE (jump, rvc, length);
340
341 return length;
342 }
343
344 /* Information about an opcode name, mnemonics and its value. */
345 struct opcode_name_t
346 {
347 const char *name;
348 unsigned int val;
349 };
350
351 /* List for all supported opcode name. */
352 static const struct opcode_name_t opcode_name_list[] =
353 {
354 {"C0", 0x0},
355 {"C1", 0x1},
356 {"C2", 0x2},
357
358 {"LOAD", 0x03},
359 {"LOAD_FP", 0x07},
360 {"CUSTOM_0", 0x0b},
361 {"MISC_MEM", 0x0f},
362 {"OP_IMM", 0x13},
363 {"AUIPC", 0x17},
364 {"OP_IMM_32", 0x1b},
365 /* 48b 0x1f. */
366
367 {"STORE", 0x23},
368 {"STORE_FP", 0x27},
369 {"CUSTOM_1", 0x2b},
370 {"AMO", 0x2f},
371 {"OP", 0x33},
372 {"LUI", 0x37},
373 {"OP_32", 0x3b},
374 /* 64b 0x3f. */
375
376 {"MADD", 0x43},
377 {"MSUB", 0x47},
378 {"NMADD", 0x4f},
379 {"NMSUB", 0x4b},
380 {"OP_FP", 0x53},
381 /*reserved 0x57. */
382 {"CUSTOM_2", 0x5b},
383 /* 48b 0x5f. */
384
385 {"BRANCH", 0x63},
386 {"JALR", 0x67},
387 /*reserved 0x5b. */
388 {"JAL", 0x6f},
389 {"SYSTEM", 0x73},
390 /*reserved 0x77. */
391 {"CUSTOM_3", 0x7b},
392 /* >80b 0x7f. */
393
394 {NULL, 0}
395 };
396
397 /* Hash table for lookup opcode name. */
398 static struct hash_control *opcode_names_hash = NULL;
399
400 /* Initialization for hash table of opcode name. */
401 static void
402 init_opcode_names_hash (void)
403 {
404 const char *retval;
405 const struct opcode_name_t *opcode;
406
407 for (opcode = &opcode_name_list[0]; opcode->name != NULL; ++opcode)
408 {
409 retval = hash_insert (opcode_names_hash, opcode->name, (void *)opcode);
410
411 if (retval != NULL)
412 as_fatal (_("internal error: can't hash `%s': %s"),
413 opcode->name, retval);
414 }
415 }
416
417 /* Find `s` is a valid opcode name or not,
418 return the opcode name info if found. */
419 static const struct opcode_name_t *
420 opcode_name_lookup (char **s)
421 {
422 char *e;
423 char save_c;
424 struct opcode_name_t *o;
425
426 /* Find end of name. */
427 e = *s;
428 if (is_name_beginner (*e))
429 ++e;
430 while (is_part_of_name (*e))
431 ++e;
432
433 /* Terminate name. */
434 save_c = *e;
435 *e = '\0';
436
437 o = (struct opcode_name_t *) hash_find (opcode_names_hash, *s);
438
439 /* Advance to next token if one was recognized. */
440 if (o)
441 *s = e;
442
443 *e = save_c;
444 expr_end = e;
445
446 return o;
447 }
448
449 enum reg_class
450 {
451 RCLASS_GPR,
452 RCLASS_FPR,
453 RCLASS_CSR,
454 RCLASS_MAX
455 };
456
457 static struct hash_control *reg_names_hash = NULL;
458
459 #define ENCODE_REG_HASH(cls, n) \
460 ((void *)(uintptr_t)((n) * RCLASS_MAX + (cls) + 1))
461 #define DECODE_REG_CLASS(hash) (((uintptr_t)(hash) - 1) % RCLASS_MAX)
462 #define DECODE_REG_NUM(hash) (((uintptr_t)(hash) - 1) / RCLASS_MAX)
463
464 static void
465 hash_reg_name (enum reg_class class, const char *name, unsigned n)
466 {
467 void *hash = ENCODE_REG_HASH (class, n);
468 const char *retval = hash_insert (reg_names_hash, name, hash);
469
470 if (retval != NULL)
471 as_fatal (_("internal error: can't hash `%s': %s"), name, retval);
472 }
473
474 static void
475 hash_reg_names (enum reg_class class, const char * const names[], unsigned n)
476 {
477 unsigned i;
478
479 for (i = 0; i < n; i++)
480 hash_reg_name (class, names[i], i);
481 }
482
483 static unsigned int
484 reg_lookup_internal (const char *s, enum reg_class class)
485 {
486 void *r = hash_find (reg_names_hash, s);
487
488 if (r == NULL || DECODE_REG_CLASS (r) != class)
489 return -1;
490
491 if (riscv_opts.rve && class == RCLASS_GPR && DECODE_REG_NUM (r) > 15)
492 return -1;
493
494 return DECODE_REG_NUM (r);
495 }
496
497 static bfd_boolean
498 reg_lookup (char **s, enum reg_class class, unsigned int *regnop)
499 {
500 char *e;
501 char save_c;
502 int reg = -1;
503
504 /* Find end of name. */
505 e = *s;
506 if (is_name_beginner (*e))
507 ++e;
508 while (is_part_of_name (*e))
509 ++e;
510
511 /* Terminate name. */
512 save_c = *e;
513 *e = '\0';
514
515 /* Look for the register. Advance to next token if one was recognized. */
516 if ((reg = reg_lookup_internal (*s, class)) >= 0)
517 *s = e;
518
519 *e = save_c;
520 if (regnop)
521 *regnop = reg;
522 return reg >= 0;
523 }
524
525 static bfd_boolean
526 arg_lookup (char **s, const char *const *array, size_t size, unsigned *regnop)
527 {
528 const char *p = strchr (*s, ',');
529 size_t i, len = p ? (size_t)(p - *s) : strlen (*s);
530
531 if (len == 0)
532 return FALSE;
533
534 for (i = 0; i < size; i++)
535 if (array[i] != NULL && strncmp (array[i], *s, len) == 0)
536 {
537 *regnop = i;
538 *s += len;
539 return TRUE;
540 }
541
542 return FALSE;
543 }
544
545 /* For consistency checking, verify that all bits are specified either
546 by the match/mask part of the instruction definition, or by the
547 operand list.
548
549 `length` could be 0, 4 or 8, 0 for auto detection. */
550 static bfd_boolean
551 validate_riscv_insn (const struct riscv_opcode *opc, int length)
552 {
553 const char *p = opc->args;
554 char c;
555 insn_t used_bits = opc->mask;
556 int insn_width;
557 insn_t required_bits;
558
559 if (length == 0)
560 insn_width = 8 * riscv_insn_length (opc->match);
561 else
562 insn_width = 8 * length;
563
564 required_bits = ~0ULL >> (64 - insn_width);
565
566 if ((used_bits & opc->match) != (opc->match & required_bits))
567 {
568 as_bad (_("internal: bad RISC-V opcode (mask error): %s %s"),
569 opc->name, opc->args);
570 return FALSE;
571 }
572
573 #define USE_BITS(mask,shift) (used_bits |= ((insn_t)(mask) << (shift)))
574 while (*p)
575 switch (c = *p++)
576 {
577 case 'C': /* RVC */
578 switch (c = *p++)
579 {
580 case 'a': used_bits |= ENCODE_RVC_J_IMM (-1U); break;
581 case 'c': break; /* RS1, constrained to equal sp */
582 case 'i': used_bits |= ENCODE_RVC_SIMM3(-1U); break;
583 case 'j': used_bits |= ENCODE_RVC_IMM (-1U); break;
584 case 'o': used_bits |= ENCODE_RVC_IMM (-1U); break;
585 case 'k': used_bits |= ENCODE_RVC_LW_IMM (-1U); break;
586 case 'l': used_bits |= ENCODE_RVC_LD_IMM (-1U); break;
587 case 'm': used_bits |= ENCODE_RVC_LWSP_IMM (-1U); break;
588 case 'n': used_bits |= ENCODE_RVC_LDSP_IMM (-1U); break;
589 case 'p': used_bits |= ENCODE_RVC_B_IMM (-1U); break;
590 case 's': USE_BITS (OP_MASK_CRS1S, OP_SH_CRS1S); break;
591 case 't': USE_BITS (OP_MASK_CRS2S, OP_SH_CRS2S); break;
592 case 'u': used_bits |= ENCODE_RVC_IMM (-1U); break;
593 case 'v': used_bits |= ENCODE_RVC_IMM (-1U); break;
594 case 'w': break; /* RS1S, constrained to equal RD */
595 case 'x': break; /* RS2S, constrained to equal RD */
596 case 'z': break; /* RS2S, contrained to be x0 */
597 case 'K': used_bits |= ENCODE_RVC_ADDI4SPN_IMM (-1U); break;
598 case 'L': used_bits |= ENCODE_RVC_ADDI16SP_IMM (-1U); break;
599 case 'M': used_bits |= ENCODE_RVC_SWSP_IMM (-1U); break;
600 case 'N': used_bits |= ENCODE_RVC_SDSP_IMM (-1U); break;
601 case 'U': break; /* RS1, constrained to equal RD */
602 case 'V': USE_BITS (OP_MASK_CRS2, OP_SH_CRS2); break;
603 case '<': used_bits |= ENCODE_RVC_IMM (-1U); break;
604 case '>': used_bits |= ENCODE_RVC_IMM (-1U); break;
605 case '8': used_bits |= ENCODE_RVC_UIMM8 (-1U); break;
606 case 'S': USE_BITS (OP_MASK_CRS1S, OP_SH_CRS1S); break;
607 case 'T': USE_BITS (OP_MASK_CRS2, OP_SH_CRS2); break;
608 case 'D': USE_BITS (OP_MASK_CRS2S, OP_SH_CRS2S); break;
609 case 'F': /* funct */
610 switch (c = *p++)
611 {
612 case '6': USE_BITS (OP_MASK_CFUNCT6, OP_SH_CFUNCT6); break;
613 case '4': USE_BITS (OP_MASK_CFUNCT4, OP_SH_CFUNCT4); break;
614 case '3': USE_BITS (OP_MASK_CFUNCT3, OP_SH_CFUNCT3); break;
615 case '2': USE_BITS (OP_MASK_CFUNCT2, OP_SH_CFUNCT2); break;
616 default:
617 as_bad (_("internal: bad RISC-V opcode"
618 " (unknown operand type `CF%c'): %s %s"),
619 c, opc->name, opc->args);
620 return FALSE;
621 }
622 break;
623 default:
624 as_bad (_("internal: bad RISC-V opcode (unknown operand type `C%c'): %s %s"),
625 c, opc->name, opc->args);
626 return FALSE;
627 }
628 break;
629 case ',': break;
630 case '(': break;
631 case ')': break;
632 case '<': USE_BITS (OP_MASK_SHAMTW, OP_SH_SHAMTW); break;
633 case '>': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
634 case 'A': break;
635 case 'D': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
636 case 'Z': USE_BITS (OP_MASK_RS1, OP_SH_RS1); break;
637 case 'E': USE_BITS (OP_MASK_CSR, OP_SH_CSR); break;
638 case 'I': break;
639 case 'R': USE_BITS (OP_MASK_RS3, OP_SH_RS3); break;
640 case 'S': USE_BITS (OP_MASK_RS1, OP_SH_RS1); break;
641 case 'U': USE_BITS (OP_MASK_RS1, OP_SH_RS1); /* fallthru */
642 case 'T': USE_BITS (OP_MASK_RS2, OP_SH_RS2); break;
643 case 'd': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
644 case 'm': USE_BITS (OP_MASK_RM, OP_SH_RM); break;
645 case 's': USE_BITS (OP_MASK_RS1, OP_SH_RS1); break;
646 case 't': USE_BITS (OP_MASK_RS2, OP_SH_RS2); break;
647 case 'r': USE_BITS (OP_MASK_RS3, OP_SH_RS3); break;
648 case 'P': USE_BITS (OP_MASK_PRED, OP_SH_PRED); break;
649 case 'Q': USE_BITS (OP_MASK_SUCC, OP_SH_SUCC); break;
650 case 'o':
651 case 'j': used_bits |= ENCODE_ITYPE_IMM (-1U); break;
652 case 'a': used_bits |= ENCODE_UJTYPE_IMM (-1U); break;
653 case 'p': used_bits |= ENCODE_SBTYPE_IMM (-1U); break;
654 case 'q': used_bits |= ENCODE_STYPE_IMM (-1U); break;
655 case 'u': used_bits |= ENCODE_UTYPE_IMM (-1U); break;
656 case 'z': break;
657 case '[': break;
658 case ']': break;
659 case '0': break;
660 case '1': break;
661 case 'F': /* funct */
662 switch (c = *p++)
663 {
664 case '7': USE_BITS (OP_MASK_FUNCT7, OP_SH_FUNCT7); break;
665 case '3': USE_BITS (OP_MASK_FUNCT3, OP_SH_FUNCT3); break;
666 case '2': USE_BITS (OP_MASK_FUNCT2, OP_SH_FUNCT2); break;
667 default:
668 as_bad (_("internal: bad RISC-V opcode"
669 " (unknown operand type `F%c'): %s %s"),
670 c, opc->name, opc->args);
671 return FALSE;
672 }
673 break;
674 case 'O': /* opcode */
675 switch (c = *p++)
676 {
677 case '4': USE_BITS (OP_MASK_OP, OP_SH_OP); break;
678 case '2': USE_BITS (OP_MASK_OP2, OP_SH_OP2); break;
679 default:
680 as_bad (_("internal: bad RISC-V opcode"
681 " (unknown operand type `F%c'): %s %s"),
682 c, opc->name, opc->args);
683 return FALSE;
684 }
685 break;
686 default:
687 as_bad (_("internal: bad RISC-V opcode "
688 "(unknown operand type `%c'): %s %s"),
689 c, opc->name, opc->args);
690 return FALSE;
691 }
692 #undef USE_BITS
693 if (used_bits != required_bits)
694 {
695 as_bad (_("internal: bad RISC-V opcode (bits 0x%lx undefined): %s %s"),
696 ~(unsigned long)(used_bits & required_bits),
697 opc->name, opc->args);
698 return FALSE;
699 }
700 return TRUE;
701 }
702
703 struct percent_op_match
704 {
705 const char *str;
706 bfd_reloc_code_real_type reloc;
707 };
708
709 /* Common hash table initialization function for
710 instruction and .insn directive. */
711 static struct hash_control *
712 init_opcode_hash (const struct riscv_opcode *opcodes,
713 bfd_boolean insn_directive_p)
714 {
715 int i = 0;
716 int length;
717 struct hash_control *hash = hash_new ();
718 while (opcodes[i].name)
719 {
720 const char *name = opcodes[i].name;
721 const char *hash_error =
722 hash_insert (hash, name, (void *) &opcodes[i]);
723
724 if (hash_error)
725 {
726 fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
727 opcodes[i].name, hash_error);
728 /* Probably a memory allocation problem? Give up now. */
729 as_fatal (_("Broken assembler. No assembly attempted."));
730 }
731
732 do
733 {
734 if (opcodes[i].pinfo != INSN_MACRO)
735 {
736 if (insn_directive_p)
737 length = ((name[0] == 'c') ? 2 : 4);
738 else
739 length = 0; /* Let assembler determine the length. */
740 if (!validate_riscv_insn (&opcodes[i], length))
741 as_fatal (_("Broken assembler. No assembly attempted."));
742 }
743 else
744 gas_assert (!insn_directive_p);
745 ++i;
746 }
747 while (opcodes[i].name && !strcmp (opcodes[i].name, name));
748 }
749
750 return hash;
751 }
752
753 /* This function is called once, at assembler startup time. It should set up
754 all the tables, etc. that the MD part of the assembler will need. */
755
756 void
757 md_begin (void)
758 {
759 unsigned long mach = xlen == 64 ? bfd_mach_riscv64 : bfd_mach_riscv32;
760
761 if (! bfd_set_arch_mach (stdoutput, bfd_arch_riscv, mach))
762 as_warn (_("Could not set architecture and machine"));
763
764 op_hash = init_opcode_hash (riscv_opcodes, FALSE);
765 insn_type_hash = init_opcode_hash (riscv_insn_types, TRUE);
766
767 reg_names_hash = hash_new ();
768 hash_reg_names (RCLASS_GPR, riscv_gpr_names_numeric, NGPR);
769 hash_reg_names (RCLASS_GPR, riscv_gpr_names_abi, NGPR);
770 hash_reg_names (RCLASS_FPR, riscv_fpr_names_numeric, NFPR);
771 hash_reg_names (RCLASS_FPR, riscv_fpr_names_abi, NFPR);
772
773 /* Add "fp" as an alias for "s0". */
774 hash_reg_name (RCLASS_GPR, "fp", 8);
775
776 opcode_names_hash = hash_new ();
777 init_opcode_names_hash ();
778
779 #define DECLARE_CSR(name, num) hash_reg_name (RCLASS_CSR, #name, num);
780 #define DECLARE_CSR_ALIAS(name, num) DECLARE_CSR(name, num);
781 #include "opcode/riscv-opc.h"
782 #undef DECLARE_CSR
783
784 /* Set the default alignment for the text section. */
785 record_alignment (text_section, riscv_opts.rvc ? 1 : 2);
786 }
787
788 static insn_t
789 riscv_apply_const_reloc (bfd_reloc_code_real_type reloc_type, bfd_vma value)
790 {
791 switch (reloc_type)
792 {
793 case BFD_RELOC_32:
794 return value;
795
796 case BFD_RELOC_RISCV_HI20:
797 return ENCODE_UTYPE_IMM (RISCV_CONST_HIGH_PART (value));
798
799 case BFD_RELOC_RISCV_LO12_S:
800 return ENCODE_STYPE_IMM (value);
801
802 case BFD_RELOC_RISCV_LO12_I:
803 return ENCODE_ITYPE_IMM (value);
804
805 default:
806 abort ();
807 }
808 }
809
810 /* Output an instruction. IP is the instruction information.
811 ADDRESS_EXPR is an operand of the instruction to be used with
812 RELOC_TYPE. */
813
814 static void
815 append_insn (struct riscv_cl_insn *ip, expressionS *address_expr,
816 bfd_reloc_code_real_type reloc_type)
817 {
818 dwarf2_emit_insn (0);
819
820 if (reloc_type != BFD_RELOC_UNUSED)
821 {
822 reloc_howto_type *howto;
823
824 gas_assert (address_expr);
825 if (reloc_type == BFD_RELOC_12_PCREL
826 || reloc_type == BFD_RELOC_RISCV_JMP)
827 {
828 int j = reloc_type == BFD_RELOC_RISCV_JMP;
829 int best_case = riscv_insn_length (ip->insn_opcode);
830 unsigned worst_case = relaxed_branch_length (NULL, NULL, 0);
831 add_relaxed_insn (ip, worst_case, best_case,
832 RELAX_BRANCH_ENCODE (j, best_case == 2, worst_case),
833 address_expr->X_add_symbol,
834 address_expr->X_add_number);
835 return;
836 }
837 else
838 {
839 howto = bfd_reloc_type_lookup (stdoutput, reloc_type);
840 if (howto == NULL)
841 as_bad (_("Unsupported RISC-V relocation number %d"), reloc_type);
842
843 ip->fixp = fix_new_exp (ip->frag, ip->where,
844 bfd_get_reloc_size (howto),
845 address_expr, FALSE, reloc_type);
846
847 ip->fixp->fx_tcbit = riscv_opts.relax;
848 }
849 }
850
851 add_fixed_insn (ip);
852 install_insn (ip);
853
854 /* We need to start a new frag after any instruction that can be
855 optimized away or compressed by the linker during relaxation, to prevent
856 the assembler from computing static offsets across such an instruction.
857 This is necessary to get correct EH info. */
858 if (reloc_type == BFD_RELOC_RISCV_CALL
859 || reloc_type == BFD_RELOC_RISCV_CALL_PLT
860 || reloc_type == BFD_RELOC_RISCV_HI20
861 || reloc_type == BFD_RELOC_RISCV_PCREL_HI20
862 || reloc_type == BFD_RELOC_RISCV_TPREL_HI20
863 || reloc_type == BFD_RELOC_RISCV_TPREL_ADD)
864 {
865 frag_wane (frag_now);
866 frag_new (0);
867 }
868 }
869
870 /* Build an instruction created by a macro expansion. This is passed
871 a pointer to the count of instructions created so far, an
872 expression, the name of the instruction to build, an operand format
873 string, and corresponding arguments. */
874
875 static void
876 macro_build (expressionS *ep, const char *name, const char *fmt, ...)
877 {
878 const struct riscv_opcode *mo;
879 struct riscv_cl_insn insn;
880 bfd_reloc_code_real_type r;
881 va_list args;
882
883 va_start (args, fmt);
884
885 r = BFD_RELOC_UNUSED;
886 mo = (struct riscv_opcode *) hash_find (op_hash, name);
887 gas_assert (mo);
888
889 /* Find a non-RVC variant of the instruction. append_insn will compress
890 it if possible. */
891 while (riscv_insn_length (mo->match) < 4)
892 mo++;
893 gas_assert (strcmp (name, mo->name) == 0);
894
895 create_insn (&insn, mo);
896 for (;;)
897 {
898 switch (*fmt++)
899 {
900 case 'd':
901 INSERT_OPERAND (RD, insn, va_arg (args, int));
902 continue;
903
904 case 's':
905 INSERT_OPERAND (RS1, insn, va_arg (args, int));
906 continue;
907
908 case 't':
909 INSERT_OPERAND (RS2, insn, va_arg (args, int));
910 continue;
911
912 case '>':
913 INSERT_OPERAND (SHAMT, insn, va_arg (args, int));
914 continue;
915
916 case 'j':
917 case 'u':
918 case 'q':
919 gas_assert (ep != NULL);
920 r = va_arg (args, int);
921 continue;
922
923 case '\0':
924 break;
925 case ',':
926 continue;
927 default:
928 as_fatal (_("internal error: invalid macro"));
929 }
930 break;
931 }
932 va_end (args);
933 gas_assert (r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
934
935 append_insn (&insn, ep, r);
936 }
937
938 /* Build an instruction created by a macro expansion. Like md_assemble but
939 accept a printf-style format string and arguments. */
940
941 static void
942 md_assemblef (const char *format, ...)
943 {
944 char *buf = NULL;
945 va_list ap;
946 int r;
947
948 va_start (ap, format);
949
950 r = vasprintf (&buf, format, ap);
951
952 if (r < 0)
953 as_fatal (_("internal error: vasprintf failed"));
954
955 md_assemble (buf);
956 free(buf);
957
958 va_end (ap);
959 }
960
961 /* Sign-extend 32-bit mode constants that have bit 31 set and all higher bits
962 unset. */
963 static void
964 normalize_constant_expr (expressionS *ex)
965 {
966 if (xlen > 32)
967 return;
968 if ((ex->X_op == O_constant || ex->X_op == O_symbol)
969 && IS_ZEXT_32BIT_NUM (ex->X_add_number))
970 ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000)
971 - 0x80000000);
972 }
973
974 /* Fail if an expression EX is not a constant. IP is the instruction using EX.
975 MAYBE_CSR is true if the symbol may be an unrecognized CSR name. */
976
977 static void
978 check_absolute_expr (struct riscv_cl_insn *ip, expressionS *ex,
979 bfd_boolean maybe_csr)
980 {
981 if (ex->X_op == O_big)
982 as_bad (_("unsupported large constant"));
983 else if (maybe_csr && ex->X_op == O_symbol)
984 as_bad (_("unknown CSR `%s'"),
985 S_GET_NAME (ex->X_add_symbol));
986 else if (ex->X_op != O_constant)
987 as_bad (_("Instruction %s requires absolute expression"),
988 ip->insn_mo->name);
989 normalize_constant_expr (ex);
990 }
991
992 static symbolS *
993 make_internal_label (void)
994 {
995 return (symbolS *) local_symbol_make (FAKE_LABEL_NAME, now_seg,
996 (valueT) frag_now_fix (), frag_now);
997 }
998
999 /* Load an entry from the GOT. */
1000 static void
1001 pcrel_access (int destreg, int tempreg, expressionS *ep,
1002 const char *lo_insn, const char *lo_pattern,
1003 bfd_reloc_code_real_type hi_reloc,
1004 bfd_reloc_code_real_type lo_reloc)
1005 {
1006 expressionS ep2;
1007 ep2.X_op = O_symbol;
1008 ep2.X_add_symbol = make_internal_label ();
1009 ep2.X_add_number = 0;
1010
1011 macro_build (ep, "auipc", "d,u", tempreg, hi_reloc);
1012 macro_build (&ep2, lo_insn, lo_pattern, destreg, tempreg, lo_reloc);
1013 }
1014
1015 static void
1016 pcrel_load (int destreg, int tempreg, expressionS *ep, const char *lo_insn,
1017 bfd_reloc_code_real_type hi_reloc,
1018 bfd_reloc_code_real_type lo_reloc)
1019 {
1020 pcrel_access (destreg, tempreg, ep, lo_insn, "d,s,j", hi_reloc, lo_reloc);
1021 }
1022
1023 static void
1024 pcrel_store (int srcreg, int tempreg, expressionS *ep, const char *lo_insn,
1025 bfd_reloc_code_real_type hi_reloc,
1026 bfd_reloc_code_real_type lo_reloc)
1027 {
1028 pcrel_access (srcreg, tempreg, ep, lo_insn, "t,s,q", hi_reloc, lo_reloc);
1029 }
1030
1031 /* PC-relative function call using AUIPC/JALR, relaxed to JAL. */
1032 static void
1033 riscv_call (int destreg, int tempreg, expressionS *ep,
1034 bfd_reloc_code_real_type reloc)
1035 {
1036 macro_build (ep, "auipc", "d,u", tempreg, reloc);
1037 macro_build (NULL, "jalr", "d,s", destreg, tempreg);
1038 }
1039
1040 /* Load an integer constant into a register. */
1041
1042 static void
1043 load_const (int reg, expressionS *ep)
1044 {
1045 int shift = RISCV_IMM_BITS;
1046 bfd_vma upper_imm;
1047 expressionS upper = *ep, lower = *ep;
1048 lower.X_add_number = (int32_t) ep->X_add_number << (32-shift) >> (32-shift);
1049 upper.X_add_number -= lower.X_add_number;
1050
1051 if (ep->X_op != O_constant)
1052 {
1053 as_bad (_("unsupported large constant"));
1054 return;
1055 }
1056
1057 if (xlen > 32 && !IS_SEXT_32BIT_NUM (ep->X_add_number))
1058 {
1059 /* Reduce to a signed 32-bit constant using SLLI and ADDI. */
1060 while (((upper.X_add_number >> shift) & 1) == 0)
1061 shift++;
1062
1063 upper.X_add_number = (int64_t) upper.X_add_number >> shift;
1064 load_const (reg, &upper);
1065
1066 md_assemblef ("slli x%d, x%d, 0x%x", reg, reg, shift);
1067 if (lower.X_add_number != 0)
1068 md_assemblef ("addi x%d, x%d, %" BFD_VMA_FMT "d", reg, reg,
1069 lower.X_add_number);
1070 }
1071 else
1072 {
1073 /* Simply emit LUI and/or ADDI to build a 32-bit signed constant. */
1074 int hi_reg = 0;
1075
1076 if (upper.X_add_number != 0)
1077 {
1078 /* Discard low part and zero-extend upper immediate. */
1079 upper_imm = ((uint32_t)upper.X_add_number >> shift);
1080
1081 md_assemblef ("lui x%d, 0x%" BFD_VMA_FMT "x", reg, upper_imm);
1082 hi_reg = reg;
1083 }
1084
1085 if (lower.X_add_number != 0 || hi_reg == 0)
1086 md_assemblef ("%s x%d, x%d, %" BFD_VMA_FMT "d", ADD32_INSN, reg, hi_reg,
1087 lower.X_add_number);
1088 }
1089 }
1090
1091 /* Expand RISC-V assembly macros into one or more instructions. */
1092 static void
1093 macro (struct riscv_cl_insn *ip, expressionS *imm_expr,
1094 bfd_reloc_code_real_type *imm_reloc)
1095 {
1096 int rd = (ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD;
1097 int rs1 = (ip->insn_opcode >> OP_SH_RS1) & OP_MASK_RS1;
1098 int rs2 = (ip->insn_opcode >> OP_SH_RS2) & OP_MASK_RS2;
1099 int mask = ip->insn_mo->mask;
1100
1101 switch (mask)
1102 {
1103 case M_LI:
1104 load_const (rd, imm_expr);
1105 break;
1106
1107 case M_LA:
1108 case M_LLA:
1109 /* Load the address of a symbol into a register. */
1110 if (!IS_SEXT_32BIT_NUM (imm_expr->X_add_number))
1111 as_bad (_("offset too large"));
1112
1113 if (imm_expr->X_op == O_constant)
1114 load_const (rd, imm_expr);
1115 else if (riscv_opts.pic && mask == M_LA) /* Global PIC symbol */
1116 pcrel_load (rd, rd, imm_expr, LOAD_ADDRESS_INSN,
1117 BFD_RELOC_RISCV_GOT_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1118 else /* Local PIC symbol, or any non-PIC symbol */
1119 pcrel_load (rd, rd, imm_expr, "addi",
1120 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1121 break;
1122
1123 case M_LA_TLS_GD:
1124 pcrel_load (rd, rd, imm_expr, "addi",
1125 BFD_RELOC_RISCV_TLS_GD_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1126 break;
1127
1128 case M_LA_TLS_IE:
1129 pcrel_load (rd, rd, imm_expr, LOAD_ADDRESS_INSN,
1130 BFD_RELOC_RISCV_TLS_GOT_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1131 break;
1132
1133 case M_LB:
1134 pcrel_load (rd, rd, imm_expr, "lb",
1135 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1136 break;
1137
1138 case M_LBU:
1139 pcrel_load (rd, rd, imm_expr, "lbu",
1140 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1141 break;
1142
1143 case M_LH:
1144 pcrel_load (rd, rd, imm_expr, "lh",
1145 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1146 break;
1147
1148 case M_LHU:
1149 pcrel_load (rd, rd, imm_expr, "lhu",
1150 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1151 break;
1152
1153 case M_LW:
1154 pcrel_load (rd, rd, imm_expr, "lw",
1155 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1156 break;
1157
1158 case M_LWU:
1159 pcrel_load (rd, rd, imm_expr, "lwu",
1160 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1161 break;
1162
1163 case M_LD:
1164 pcrel_load (rd, rd, imm_expr, "ld",
1165 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1166 break;
1167
1168 case M_FLW:
1169 pcrel_load (rd, rs1, imm_expr, "flw",
1170 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1171 break;
1172
1173 case M_FLD:
1174 pcrel_load (rd, rs1, imm_expr, "fld",
1175 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_I);
1176 break;
1177
1178 case M_SB:
1179 pcrel_store (rs2, rs1, imm_expr, "sb",
1180 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1181 break;
1182
1183 case M_SH:
1184 pcrel_store (rs2, rs1, imm_expr, "sh",
1185 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1186 break;
1187
1188 case M_SW:
1189 pcrel_store (rs2, rs1, imm_expr, "sw",
1190 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1191 break;
1192
1193 case M_SD:
1194 pcrel_store (rs2, rs1, imm_expr, "sd",
1195 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1196 break;
1197
1198 case M_FSW:
1199 pcrel_store (rs2, rs1, imm_expr, "fsw",
1200 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1201 break;
1202
1203 case M_FSD:
1204 pcrel_store (rs2, rs1, imm_expr, "fsd",
1205 BFD_RELOC_RISCV_PCREL_HI20, BFD_RELOC_RISCV_PCREL_LO12_S);
1206 break;
1207
1208 case M_CALL:
1209 riscv_call (rd, rs1, imm_expr, *imm_reloc);
1210 break;
1211
1212 default:
1213 as_bad (_("Macro %s not implemented"), ip->insn_mo->name);
1214 break;
1215 }
1216 }
1217
1218 static const struct percent_op_match percent_op_utype[] =
1219 {
1220 {"%tprel_hi", BFD_RELOC_RISCV_TPREL_HI20},
1221 {"%pcrel_hi", BFD_RELOC_RISCV_PCREL_HI20},
1222 {"%tls_ie_pcrel_hi", BFD_RELOC_RISCV_TLS_GOT_HI20},
1223 {"%tls_gd_pcrel_hi", BFD_RELOC_RISCV_TLS_GD_HI20},
1224 {"%hi", BFD_RELOC_RISCV_HI20},
1225 {0, 0}
1226 };
1227
1228 static const struct percent_op_match percent_op_itype[] =
1229 {
1230 {"%lo", BFD_RELOC_RISCV_LO12_I},
1231 {"%tprel_lo", BFD_RELOC_RISCV_TPREL_LO12_I},
1232 {"%pcrel_lo", BFD_RELOC_RISCV_PCREL_LO12_I},
1233 {0, 0}
1234 };
1235
1236 static const struct percent_op_match percent_op_stype[] =
1237 {
1238 {"%lo", BFD_RELOC_RISCV_LO12_S},
1239 {"%tprel_lo", BFD_RELOC_RISCV_TPREL_LO12_S},
1240 {"%pcrel_lo", BFD_RELOC_RISCV_PCREL_LO12_S},
1241 {0, 0}
1242 };
1243
1244 static const struct percent_op_match percent_op_rtype[] =
1245 {
1246 {"%tprel_add", BFD_RELOC_RISCV_TPREL_ADD},
1247 {0, 0}
1248 };
1249
1250 static const struct percent_op_match percent_op_null[] =
1251 {
1252 {0, 0}
1253 };
1254
1255 /* Return true if *STR points to a relocation operator. When returning true,
1256 move *STR over the operator and store its relocation code in *RELOC.
1257 Leave both *STR and *RELOC alone when returning false. */
1258
1259 static bfd_boolean
1260 parse_relocation (char **str, bfd_reloc_code_real_type *reloc,
1261 const struct percent_op_match *percent_op)
1262 {
1263 for ( ; percent_op->str; percent_op++)
1264 if (strncasecmp (*str, percent_op->str, strlen (percent_op->str)) == 0)
1265 {
1266 int len = strlen (percent_op->str);
1267
1268 if (!ISSPACE ((*str)[len]) && (*str)[len] != '(')
1269 continue;
1270
1271 *str += strlen (percent_op->str);
1272 *reloc = percent_op->reloc;
1273
1274 /* Check whether the output BFD supports this relocation.
1275 If not, issue an error and fall back on something safe. */
1276 if (*reloc != BFD_RELOC_UNUSED
1277 && !bfd_reloc_type_lookup (stdoutput, *reloc))
1278 {
1279 as_bad ("relocation %s isn't supported by the current ABI",
1280 percent_op->str);
1281 *reloc = BFD_RELOC_UNUSED;
1282 }
1283 return TRUE;
1284 }
1285 return FALSE;
1286 }
1287
1288 static void
1289 my_getExpression (expressionS *ep, char *str)
1290 {
1291 char *save_in;
1292
1293 save_in = input_line_pointer;
1294 input_line_pointer = str;
1295 expression (ep);
1296 expr_end = input_line_pointer;
1297 input_line_pointer = save_in;
1298 }
1299
1300 /* Parse string STR as a 16-bit relocatable operand. Store the
1301 expression in *EP and the relocation, if any, in RELOC.
1302 Return the number of relocation operators used (0 or 1).
1303
1304 On exit, EXPR_END points to the first character after the expression. */
1305
1306 static size_t
1307 my_getSmallExpression (expressionS *ep, bfd_reloc_code_real_type *reloc,
1308 char *str, const struct percent_op_match *percent_op)
1309 {
1310 size_t reloc_index;
1311 unsigned crux_depth, str_depth, regno;
1312 char *crux;
1313
1314 /* First, check for integer registers. No callers can accept a reg, but
1315 we need to avoid accidentally creating a useless undefined symbol below,
1316 if this is an instruction pattern that can't match. A glibc build fails
1317 if this is removed. */
1318 if (reg_lookup (&str, RCLASS_GPR, &regno))
1319 {
1320 ep->X_op = O_register;
1321 ep->X_add_number = regno;
1322 expr_end = str;
1323 return 0;
1324 }
1325
1326 /* Search for the start of the main expression.
1327 End the loop with CRUX pointing to the start
1328 of the main expression and with CRUX_DEPTH containing the number
1329 of open brackets at that point. */
1330 reloc_index = -1;
1331 str_depth = 0;
1332 do
1333 {
1334 reloc_index++;
1335 crux = str;
1336 crux_depth = str_depth;
1337
1338 /* Skip over whitespace and brackets, keeping count of the number
1339 of brackets. */
1340 while (*str == ' ' || *str == '\t' || *str == '(')
1341 if (*str++ == '(')
1342 str_depth++;
1343 }
1344 while (*str == '%'
1345 && reloc_index < 1
1346 && parse_relocation (&str, reloc, percent_op));
1347
1348 my_getExpression (ep, crux);
1349 str = expr_end;
1350
1351 /* Match every open bracket. */
1352 while (crux_depth > 0 && (*str == ')' || *str == ' ' || *str == '\t'))
1353 if (*str++ == ')')
1354 crux_depth--;
1355
1356 if (crux_depth > 0)
1357 as_bad ("unclosed '('");
1358
1359 expr_end = str;
1360
1361 return reloc_index;
1362 }
1363
1364 /* Parse opcode name, could be an mnemonics or number. */
1365 static size_t
1366 my_getOpcodeExpression (expressionS *ep, bfd_reloc_code_real_type *reloc,
1367 char *str, const struct percent_op_match *percent_op)
1368 {
1369 const struct opcode_name_t *o = opcode_name_lookup (&str);
1370
1371 if (o != NULL)
1372 {
1373 ep->X_op = O_constant;
1374 ep->X_add_number = o->val;
1375 return 0;
1376 }
1377
1378 return my_getSmallExpression (ep, reloc, str, percent_op);
1379 }
1380
1381 /* Detect and handle implicitly zero load-store offsets. For example,
1382 "lw t0, (t1)" is shorthand for "lw t0, 0(t1)". Return TRUE iff such
1383 an implicit offset was detected. */
1384
1385 static bfd_boolean
1386 riscv_handle_implicit_zero_offset (expressionS *ep, const char *s)
1387 {
1388 /* Check whether there is only a single bracketed expression left.
1389 If so, it must be the base register and the constant must be zero. */
1390 if (*s == '(' && strchr (s + 1, '(') == 0)
1391 {
1392 ep->X_op = O_constant;
1393 ep->X_add_number = 0;
1394 return TRUE;
1395 }
1396
1397 return FALSE;
1398 }
1399
1400 /* This routine assembles an instruction into its binary format. As a
1401 side effect, it sets the global variable imm_reloc to the type of
1402 relocation to do if one of the operands is an address expression. */
1403
1404 static const char *
1405 riscv_ip (char *str, struct riscv_cl_insn *ip, expressionS *imm_expr,
1406 bfd_reloc_code_real_type *imm_reloc, struct hash_control *hash)
1407 {
1408 char *s;
1409 const char *args;
1410 char c = 0;
1411 struct riscv_opcode *insn;
1412 char *argsStart;
1413 unsigned int regno;
1414 char save_c = 0;
1415 int argnum;
1416 const struct percent_op_match *p;
1417 const char *error = "unrecognized opcode";
1418
1419 /* Parse the name of the instruction. Terminate the string if whitespace
1420 is found so that hash_find only sees the name part of the string. */
1421 for (s = str; *s != '\0'; ++s)
1422 if (ISSPACE (*s))
1423 {
1424 save_c = *s;
1425 *s++ = '\0';
1426 break;
1427 }
1428
1429 insn = (struct riscv_opcode *) hash_find (hash, str);
1430
1431 argsStart = s;
1432 for ( ; insn && insn->name && strcmp (insn->name, str) == 0; insn++)
1433 {
1434 if ((insn->xlen_requirement != 0) && (xlen != insn->xlen_requirement))
1435 continue;
1436
1437 if (!riscv_multi_subset_supports (insn->insn_class))
1438 continue;
1439
1440 create_insn (ip, insn);
1441 argnum = 1;
1442
1443 imm_expr->X_op = O_absent;
1444 *imm_reloc = BFD_RELOC_UNUSED;
1445 p = percent_op_itype;
1446
1447 for (args = insn->args;; ++args)
1448 {
1449 s += strspn (s, " \t");
1450 switch (*args)
1451 {
1452 case '\0': /* End of args. */
1453 if (insn->pinfo != INSN_MACRO)
1454 {
1455 if (!insn->match_func (insn, ip->insn_opcode))
1456 break;
1457
1458 /* For .insn, insn->match and insn->mask are 0. */
1459 if (riscv_insn_length ((insn->match == 0 && insn->mask == 0)
1460 ? ip->insn_opcode
1461 : insn->match) == 2
1462 && !riscv_opts.rvc)
1463 break;
1464 }
1465 if (*s != '\0')
1466 break;
1467 /* Successful assembly. */
1468 error = NULL;
1469 goto out;
1470
1471 case 'C': /* RVC */
1472 switch (*++args)
1473 {
1474 case 's': /* RS1 x8-x15 */
1475 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1476 || !(regno >= 8 && regno <= 15))
1477 break;
1478 INSERT_OPERAND (CRS1S, *ip, regno % 8);
1479 continue;
1480 case 'w': /* RS1 x8-x15, constrained to equal RD x8-x15. */
1481 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1482 || EXTRACT_OPERAND (CRS1S, ip->insn_opcode) + 8 != regno)
1483 break;
1484 continue;
1485 case 't': /* RS2 x8-x15 */
1486 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1487 || !(regno >= 8 && regno <= 15))
1488 break;
1489 INSERT_OPERAND (CRS2S, *ip, regno % 8);
1490 continue;
1491 case 'x': /* RS2 x8-x15, constrained to equal RD x8-x15. */
1492 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1493 || EXTRACT_OPERAND (CRS2S, ip->insn_opcode) + 8 != regno)
1494 break;
1495 continue;
1496 case 'U': /* RS1, constrained to equal RD. */
1497 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1498 || EXTRACT_OPERAND (RD, ip->insn_opcode) != regno)
1499 break;
1500 continue;
1501 case 'V': /* RS2 */
1502 if (!reg_lookup (&s, RCLASS_GPR, &regno))
1503 break;
1504 INSERT_OPERAND (CRS2, *ip, regno);
1505 continue;
1506 case 'c': /* RS1, constrained to equal sp. */
1507 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1508 || regno != X_SP)
1509 break;
1510 continue;
1511 case 'z': /* RS2, contrained to equal x0. */
1512 if (!reg_lookup (&s, RCLASS_GPR, &regno)
1513 || regno != 0)
1514 break;
1515 continue;
1516 case '>':
1517 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1518 || imm_expr->X_op != O_constant
1519 || imm_expr->X_add_number <= 0
1520 || imm_expr->X_add_number >= 64)
1521 break;
1522 ip->insn_opcode |= ENCODE_RVC_IMM (imm_expr->X_add_number);
1523 rvc_imm_done:
1524 s = expr_end;
1525 imm_expr->X_op = O_absent;
1526 continue;
1527 case '<':
1528 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1529 || imm_expr->X_op != O_constant
1530 || !VALID_RVC_IMM (imm_expr->X_add_number)
1531 || imm_expr->X_add_number <= 0
1532 || imm_expr->X_add_number >= 32)
1533 break;
1534 ip->insn_opcode |= ENCODE_RVC_IMM (imm_expr->X_add_number);
1535 goto rvc_imm_done;
1536 case '8':
1537 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1538 || imm_expr->X_op != O_constant
1539 || !VALID_RVC_UIMM8 (imm_expr->X_add_number)
1540 || imm_expr->X_add_number < 0
1541 || imm_expr->X_add_number >= 256)
1542 break;
1543 ip->insn_opcode |= ENCODE_RVC_UIMM8 (imm_expr->X_add_number);
1544 goto rvc_imm_done;
1545 case 'i':
1546 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1547 || imm_expr->X_op != O_constant
1548 || imm_expr->X_add_number == 0
1549 || !VALID_RVC_SIMM3 (imm_expr->X_add_number))
1550 break;
1551 ip->insn_opcode |= ENCODE_RVC_SIMM3 (imm_expr->X_add_number);
1552 goto rvc_imm_done;
1553 case 'j':
1554 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1555 || imm_expr->X_op != O_constant
1556 || imm_expr->X_add_number == 0
1557 || !VALID_RVC_IMM (imm_expr->X_add_number))
1558 break;
1559 ip->insn_opcode |= ENCODE_RVC_IMM (imm_expr->X_add_number);
1560 goto rvc_imm_done;
1561 case 'k':
1562 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1563 continue;
1564 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1565 || imm_expr->X_op != O_constant
1566 || !VALID_RVC_LW_IMM (imm_expr->X_add_number))
1567 break;
1568 ip->insn_opcode |= ENCODE_RVC_LW_IMM (imm_expr->X_add_number);
1569 goto rvc_imm_done;
1570 case 'l':
1571 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1572 continue;
1573 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1574 || imm_expr->X_op != O_constant
1575 || !VALID_RVC_LD_IMM (imm_expr->X_add_number))
1576 break;
1577 ip->insn_opcode |= ENCODE_RVC_LD_IMM (imm_expr->X_add_number);
1578 goto rvc_imm_done;
1579 case 'm':
1580 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1581 continue;
1582 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1583 || imm_expr->X_op != O_constant
1584 || !VALID_RVC_LWSP_IMM (imm_expr->X_add_number))
1585 break;
1586 ip->insn_opcode |=
1587 ENCODE_RVC_LWSP_IMM (imm_expr->X_add_number);
1588 goto rvc_imm_done;
1589 case 'n':
1590 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1591 continue;
1592 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1593 || imm_expr->X_op != O_constant
1594 || !VALID_RVC_LDSP_IMM (imm_expr->X_add_number))
1595 break;
1596 ip->insn_opcode |=
1597 ENCODE_RVC_LDSP_IMM (imm_expr->X_add_number);
1598 goto rvc_imm_done;
1599 case 'o':
1600 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1601 || imm_expr->X_op != O_constant
1602 /* C.addiw, c.li, and c.andi allow zero immediate.
1603 C.addi allows zero immediate as hint. Otherwise this
1604 is same as 'j'. */
1605 || !VALID_RVC_IMM (imm_expr->X_add_number))
1606 break;
1607 ip->insn_opcode |= ENCODE_RVC_IMM (imm_expr->X_add_number);
1608 goto rvc_imm_done;
1609 case 'K':
1610 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1611 || imm_expr->X_op != O_constant
1612 || !VALID_RVC_ADDI4SPN_IMM (imm_expr->X_add_number)
1613 || imm_expr->X_add_number == 0)
1614 break;
1615 ip->insn_opcode |=
1616 ENCODE_RVC_ADDI4SPN_IMM (imm_expr->X_add_number);
1617 goto rvc_imm_done;
1618 case 'L':
1619 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1620 || imm_expr->X_op != O_constant
1621 || !VALID_RVC_ADDI16SP_IMM (imm_expr->X_add_number)
1622 || imm_expr->X_add_number == 0)
1623 break;
1624 ip->insn_opcode |=
1625 ENCODE_RVC_ADDI16SP_IMM (imm_expr->X_add_number);
1626 goto rvc_imm_done;
1627 case 'M':
1628 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1629 continue;
1630 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1631 || imm_expr->X_op != O_constant
1632 || !VALID_RVC_SWSP_IMM (imm_expr->X_add_number))
1633 break;
1634 ip->insn_opcode |=
1635 ENCODE_RVC_SWSP_IMM (imm_expr->X_add_number);
1636 goto rvc_imm_done;
1637 case 'N':
1638 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1639 continue;
1640 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1641 || imm_expr->X_op != O_constant
1642 || !VALID_RVC_SDSP_IMM (imm_expr->X_add_number))
1643 break;
1644 ip->insn_opcode |=
1645 ENCODE_RVC_SDSP_IMM (imm_expr->X_add_number);
1646 goto rvc_imm_done;
1647 case 'u':
1648 p = percent_op_utype;
1649 if (my_getSmallExpression (imm_expr, imm_reloc, s, p))
1650 break;
1651 rvc_lui:
1652 if (imm_expr->X_op != O_constant
1653 || imm_expr->X_add_number <= 0
1654 || imm_expr->X_add_number >= RISCV_BIGIMM_REACH
1655 || (imm_expr->X_add_number >= RISCV_RVC_IMM_REACH / 2
1656 && (imm_expr->X_add_number <
1657 RISCV_BIGIMM_REACH - RISCV_RVC_IMM_REACH / 2)))
1658 break;
1659 ip->insn_opcode |= ENCODE_RVC_IMM (imm_expr->X_add_number);
1660 goto rvc_imm_done;
1661 case 'v':
1662 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1663 || (imm_expr->X_add_number & (RISCV_IMM_REACH - 1))
1664 || ((int32_t)imm_expr->X_add_number
1665 != imm_expr->X_add_number))
1666 break;
1667 imm_expr->X_add_number =
1668 ((uint32_t) imm_expr->X_add_number) >> RISCV_IMM_BITS;
1669 goto rvc_lui;
1670 case 'p':
1671 goto branch;
1672 case 'a':
1673 goto jump;
1674 case 'S': /* Floating-point RS1 x8-x15. */
1675 if (!reg_lookup (&s, RCLASS_FPR, &regno)
1676 || !(regno >= 8 && regno <= 15))
1677 break;
1678 INSERT_OPERAND (CRS1S, *ip, regno % 8);
1679 continue;
1680 case 'D': /* Floating-point RS2 x8-x15. */
1681 if (!reg_lookup (&s, RCLASS_FPR, &regno)
1682 || !(regno >= 8 && regno <= 15))
1683 break;
1684 INSERT_OPERAND (CRS2S, *ip, regno % 8);
1685 continue;
1686 case 'T': /* Floating-point RS2. */
1687 if (!reg_lookup (&s, RCLASS_FPR, &regno))
1688 break;
1689 INSERT_OPERAND (CRS2, *ip, regno);
1690 continue;
1691 case 'F':
1692 switch (*++args)
1693 {
1694 case '6':
1695 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1696 || imm_expr->X_op != O_constant
1697 || imm_expr->X_add_number < 0
1698 || imm_expr->X_add_number >= 64)
1699 {
1700 as_bad (_("bad value for funct6 field, "
1701 "value must be 0...64"));
1702 break;
1703 }
1704
1705 INSERT_OPERAND (CFUNCT6, *ip, imm_expr->X_add_number);
1706 imm_expr->X_op = O_absent;
1707 s = expr_end;
1708 continue;
1709 case '4':
1710 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1711 || imm_expr->X_op != O_constant
1712 || imm_expr->X_add_number < 0
1713 || imm_expr->X_add_number >= 16)
1714 {
1715 as_bad (_("bad value for funct4 field, "
1716 "value must be 0...15"));
1717 break;
1718 }
1719
1720 INSERT_OPERAND (CFUNCT4, *ip, imm_expr->X_add_number);
1721 imm_expr->X_op = O_absent;
1722 s = expr_end;
1723 continue;
1724 case '3':
1725 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1726 || imm_expr->X_op != O_constant
1727 || imm_expr->X_add_number < 0
1728 || imm_expr->X_add_number >= 8)
1729 {
1730 as_bad (_("bad value for funct3 field, "
1731 "value must be 0...7"));
1732 break;
1733 }
1734 INSERT_OPERAND (CFUNCT3, *ip, imm_expr->X_add_number);
1735 imm_expr->X_op = O_absent;
1736 s = expr_end;
1737 continue;
1738 case '2':
1739 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
1740 || imm_expr->X_op != O_constant
1741 || imm_expr->X_add_number < 0
1742 || imm_expr->X_add_number >= 4)
1743 {
1744 as_bad (_("bad value for funct2 field, "
1745 "value must be 0...3"));
1746 break;
1747 }
1748 INSERT_OPERAND (CFUNCT2, *ip, imm_expr->X_add_number);
1749 imm_expr->X_op = O_absent;
1750 s = expr_end;
1751 continue;
1752 default:
1753 as_bad (_("bad compressed FUNCT field"
1754 " specifier 'CF%c'\n"),
1755 *args);
1756 }
1757 break;
1758
1759 default:
1760 as_bad (_("bad RVC field specifier 'C%c'\n"), *args);
1761 }
1762 break;
1763
1764 case ',':
1765 ++argnum;
1766 if (*s++ == *args)
1767 continue;
1768 s--;
1769 break;
1770
1771 case '(':
1772 case ')':
1773 case '[':
1774 case ']':
1775 if (*s++ == *args)
1776 continue;
1777 break;
1778
1779 case '<': /* Shift amount, 0 - 31. */
1780 my_getExpression (imm_expr, s);
1781 check_absolute_expr (ip, imm_expr, FALSE);
1782 if ((unsigned long) imm_expr->X_add_number > 31)
1783 as_bad (_("Improper shift amount (%lu)"),
1784 (unsigned long) imm_expr->X_add_number);
1785 INSERT_OPERAND (SHAMTW, *ip, imm_expr->X_add_number);
1786 imm_expr->X_op = O_absent;
1787 s = expr_end;
1788 continue;
1789
1790 case '>': /* Shift amount, 0 - (XLEN-1). */
1791 my_getExpression (imm_expr, s);
1792 check_absolute_expr (ip, imm_expr, FALSE);
1793 if ((unsigned long) imm_expr->X_add_number >= xlen)
1794 as_bad (_("Improper shift amount (%lu)"),
1795 (unsigned long) imm_expr->X_add_number);
1796 INSERT_OPERAND (SHAMT, *ip, imm_expr->X_add_number);
1797 imm_expr->X_op = O_absent;
1798 s = expr_end;
1799 continue;
1800
1801 case 'Z': /* CSRRxI immediate. */
1802 my_getExpression (imm_expr, s);
1803 check_absolute_expr (ip, imm_expr, FALSE);
1804 if ((unsigned long) imm_expr->X_add_number > 31)
1805 as_bad (_("Improper CSRxI immediate (%lu)"),
1806 (unsigned long) imm_expr->X_add_number);
1807 INSERT_OPERAND (RS1, *ip, imm_expr->X_add_number);
1808 imm_expr->X_op = O_absent;
1809 s = expr_end;
1810 continue;
1811
1812 case 'E': /* Control register. */
1813 if (reg_lookup (&s, RCLASS_CSR, &regno))
1814 INSERT_OPERAND (CSR, *ip, regno);
1815 else
1816 {
1817 my_getExpression (imm_expr, s);
1818 check_absolute_expr (ip, imm_expr, TRUE);
1819 if ((unsigned long) imm_expr->X_add_number > 0xfff)
1820 as_bad (_("Improper CSR address (%lu)"),
1821 (unsigned long) imm_expr->X_add_number);
1822 INSERT_OPERAND (CSR, *ip, imm_expr->X_add_number);
1823 imm_expr->X_op = O_absent;
1824 s = expr_end;
1825 }
1826 continue;
1827
1828 case 'm': /* Rounding mode. */
1829 if (arg_lookup (&s, riscv_rm, ARRAY_SIZE (riscv_rm), &regno))
1830 {
1831 INSERT_OPERAND (RM, *ip, regno);
1832 continue;
1833 }
1834 break;
1835
1836 case 'P':
1837 case 'Q': /* Fence predecessor/successor. */
1838 if (arg_lookup (&s, riscv_pred_succ, ARRAY_SIZE (riscv_pred_succ),
1839 &regno))
1840 {
1841 if (*args == 'P')
1842 INSERT_OPERAND (PRED, *ip, regno);
1843 else
1844 INSERT_OPERAND (SUCC, *ip, regno);
1845 continue;
1846 }
1847 break;
1848
1849 case 'd': /* Destination register. */
1850 case 's': /* Source register. */
1851 case 't': /* Target register. */
1852 case 'r': /* rs3. */
1853 if (reg_lookup (&s, RCLASS_GPR, &regno))
1854 {
1855 c = *args;
1856 if (*s == ' ')
1857 ++s;
1858
1859 /* Now that we have assembled one operand, we use the args
1860 string to figure out where it goes in the instruction. */
1861 switch (c)
1862 {
1863 case 's':
1864 INSERT_OPERAND (RS1, *ip, regno);
1865 break;
1866 case 'd':
1867 INSERT_OPERAND (RD, *ip, regno);
1868 break;
1869 case 't':
1870 INSERT_OPERAND (RS2, *ip, regno);
1871 break;
1872 case 'r':
1873 INSERT_OPERAND (RS3, *ip, regno);
1874 break;
1875 }
1876 continue;
1877 }
1878 break;
1879
1880 case 'D': /* Floating point rd. */
1881 case 'S': /* Floating point rs1. */
1882 case 'T': /* Floating point rs2. */
1883 case 'U': /* Floating point rs1 and rs2. */
1884 case 'R': /* Floating point rs3. */
1885 if (reg_lookup (&s, RCLASS_FPR, &regno))
1886 {
1887 c = *args;
1888 if (*s == ' ')
1889 ++s;
1890 switch (c)
1891 {
1892 case 'D':
1893 INSERT_OPERAND (RD, *ip, regno);
1894 break;
1895 case 'S':
1896 INSERT_OPERAND (RS1, *ip, regno);
1897 break;
1898 case 'U':
1899 INSERT_OPERAND (RS1, *ip, regno);
1900 /* fallthru */
1901 case 'T':
1902 INSERT_OPERAND (RS2, *ip, regno);
1903 break;
1904 case 'R':
1905 INSERT_OPERAND (RS3, *ip, regno);
1906 break;
1907 }
1908 continue;
1909 }
1910
1911 break;
1912
1913 case 'I':
1914 my_getExpression (imm_expr, s);
1915 if (imm_expr->X_op != O_big
1916 && imm_expr->X_op != O_constant)
1917 break;
1918 normalize_constant_expr (imm_expr);
1919 s = expr_end;
1920 continue;
1921
1922 case 'A':
1923 my_getExpression (imm_expr, s);
1924 normalize_constant_expr (imm_expr);
1925 /* The 'A' format specifier must be a symbol. */
1926 if (imm_expr->X_op != O_symbol)
1927 break;
1928 *imm_reloc = BFD_RELOC_32;
1929 s = expr_end;
1930 continue;
1931
1932 case 'B':
1933 my_getExpression (imm_expr, s);
1934 normalize_constant_expr (imm_expr);
1935 /* The 'B' format specifier must be a symbol or a constant. */
1936 if (imm_expr->X_op != O_symbol && imm_expr->X_op != O_constant)
1937 break;
1938 if (imm_expr->X_op == O_symbol)
1939 *imm_reloc = BFD_RELOC_32;
1940 s = expr_end;
1941 continue;
1942
1943 case 'j': /* Sign-extended immediate. */
1944 p = percent_op_itype;
1945 *imm_reloc = BFD_RELOC_RISCV_LO12_I;
1946 goto alu_op;
1947 case 'q': /* Store displacement. */
1948 p = percent_op_stype;
1949 *imm_reloc = BFD_RELOC_RISCV_LO12_S;
1950 goto load_store;
1951 case 'o': /* Load displacement. */
1952 p = percent_op_itype;
1953 *imm_reloc = BFD_RELOC_RISCV_LO12_I;
1954 goto load_store;
1955 case '1': /* 4-operand add, must be %tprel_add. */
1956 p = percent_op_rtype;
1957 goto alu_op;
1958 case '0': /* AMO "displacement," which must be zero. */
1959 p = percent_op_null;
1960 load_store:
1961 if (riscv_handle_implicit_zero_offset (imm_expr, s))
1962 continue;
1963 alu_op:
1964 /* If this value won't fit into a 16 bit offset, then go
1965 find a macro that will generate the 32 bit offset
1966 code pattern. */
1967 if (!my_getSmallExpression (imm_expr, imm_reloc, s, p))
1968 {
1969 normalize_constant_expr (imm_expr);
1970 if (imm_expr->X_op != O_constant
1971 || (*args == '0' && imm_expr->X_add_number != 0)
1972 || (*args == '1')
1973 || imm_expr->X_add_number >= (signed)RISCV_IMM_REACH/2
1974 || imm_expr->X_add_number < -(signed)RISCV_IMM_REACH/2)
1975 break;
1976 }
1977
1978 s = expr_end;
1979 continue;
1980
1981 case 'p': /* PC-relative offset. */
1982 branch:
1983 *imm_reloc = BFD_RELOC_12_PCREL;
1984 my_getExpression (imm_expr, s);
1985 s = expr_end;
1986 continue;
1987
1988 case 'u': /* Upper 20 bits. */
1989 p = percent_op_utype;
1990 if (!my_getSmallExpression (imm_expr, imm_reloc, s, p))
1991 {
1992 if (imm_expr->X_op != O_constant)
1993 break;
1994
1995 if (imm_expr->X_add_number < 0
1996 || imm_expr->X_add_number >= (signed)RISCV_BIGIMM_REACH)
1997 as_bad (_("lui expression not in range 0..1048575"));
1998
1999 *imm_reloc = BFD_RELOC_RISCV_HI20;
2000 imm_expr->X_add_number <<= RISCV_IMM_BITS;
2001 }
2002 s = expr_end;
2003 continue;
2004
2005 case 'a': /* 20-bit PC-relative offset. */
2006 jump:
2007 my_getExpression (imm_expr, s);
2008 s = expr_end;
2009 *imm_reloc = BFD_RELOC_RISCV_JMP;
2010 continue;
2011
2012 case 'c':
2013 my_getExpression (imm_expr, s);
2014 s = expr_end;
2015 if (strcmp (s, "@plt") == 0)
2016 {
2017 *imm_reloc = BFD_RELOC_RISCV_CALL_PLT;
2018 s += 4;
2019 }
2020 else
2021 *imm_reloc = BFD_RELOC_RISCV_CALL;
2022 continue;
2023 case 'O':
2024 switch (*++args)
2025 {
2026 case '4':
2027 if (my_getOpcodeExpression (imm_expr, imm_reloc, s, p)
2028 || imm_expr->X_op != O_constant
2029 || imm_expr->X_add_number < 0
2030 || imm_expr->X_add_number >= 128
2031 || (imm_expr->X_add_number & 0x3) != 3)
2032 {
2033 as_bad (_("bad value for opcode field, "
2034 "value must be 0...127 and "
2035 "lower 2 bits must be 0x3"));
2036 break;
2037 }
2038
2039 INSERT_OPERAND (OP, *ip, imm_expr->X_add_number);
2040 imm_expr->X_op = O_absent;
2041 s = expr_end;
2042 continue;
2043 case '2':
2044 if (my_getOpcodeExpression (imm_expr, imm_reloc, s, p)
2045 || imm_expr->X_op != O_constant
2046 || imm_expr->X_add_number < 0
2047 || imm_expr->X_add_number >= 3)
2048 {
2049 as_bad (_("bad value for opcode field, "
2050 "value must be 0...2"));
2051 break;
2052 }
2053
2054 INSERT_OPERAND (OP2, *ip, imm_expr->X_add_number);
2055 imm_expr->X_op = O_absent;
2056 s = expr_end;
2057 continue;
2058 default:
2059 as_bad (_("bad Opcode field specifier 'O%c'\n"), *args);
2060 }
2061 break;
2062
2063 case 'F':
2064 switch (*++args)
2065 {
2066 case '7':
2067 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
2068 || imm_expr->X_op != O_constant
2069 || imm_expr->X_add_number < 0
2070 || imm_expr->X_add_number >= 128)
2071 {
2072 as_bad (_("bad value for funct7 field, "
2073 "value must be 0...127"));
2074 break;
2075 }
2076
2077 INSERT_OPERAND (FUNCT7, *ip, imm_expr->X_add_number);
2078 imm_expr->X_op = O_absent;
2079 s = expr_end;
2080 continue;
2081 case '3':
2082 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
2083 || imm_expr->X_op != O_constant
2084 || imm_expr->X_add_number < 0
2085 || imm_expr->X_add_number >= 8)
2086 {
2087 as_bad (_("bad value for funct3 field, "
2088 "value must be 0...7"));
2089 break;
2090 }
2091
2092 INSERT_OPERAND (FUNCT3, *ip, imm_expr->X_add_number);
2093 imm_expr->X_op = O_absent;
2094 s = expr_end;
2095 continue;
2096 case '2':
2097 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
2098 || imm_expr->X_op != O_constant
2099 || imm_expr->X_add_number < 0
2100 || imm_expr->X_add_number >= 4)
2101 {
2102 as_bad (_("bad value for funct2 field, "
2103 "value must be 0...3"));
2104 break;
2105 }
2106
2107 INSERT_OPERAND (FUNCT2, *ip, imm_expr->X_add_number);
2108 imm_expr->X_op = O_absent;
2109 s = expr_end;
2110 continue;
2111
2112 default:
2113 as_bad (_("bad FUNCT field specifier 'F%c'\n"), *args);
2114 }
2115 break;
2116
2117 case 'z':
2118 if (my_getSmallExpression (imm_expr, imm_reloc, s, p)
2119 || imm_expr->X_op != O_constant
2120 || imm_expr->X_add_number != 0)
2121 break;
2122 s = expr_end;
2123 imm_expr->X_op = O_absent;
2124 continue;
2125
2126 default:
2127 as_fatal (_("internal error: bad argument type %c"), *args);
2128 }
2129 break;
2130 }
2131 s = argsStart;
2132 error = _("illegal operands");
2133 }
2134
2135 out:
2136 /* Restore the character we might have clobbered above. */
2137 if (save_c)
2138 *(argsStart - 1) = save_c;
2139
2140 return error;
2141 }
2142
2143 void
2144 md_assemble (char *str)
2145 {
2146 struct riscv_cl_insn insn;
2147 expressionS imm_expr;
2148 bfd_reloc_code_real_type imm_reloc = BFD_RELOC_UNUSED;
2149
2150 const char *error = riscv_ip (str, &insn, &imm_expr, &imm_reloc, op_hash);
2151
2152 start_assemble = TRUE;
2153
2154 if (error)
2155 {
2156 as_bad ("%s `%s'", error, str);
2157 return;
2158 }
2159
2160 if (insn.insn_mo->pinfo == INSN_MACRO)
2161 macro (&insn, &imm_expr, &imm_reloc);
2162 else
2163 append_insn (&insn, &imm_expr, imm_reloc);
2164 }
2165
2166 const char *
2167 md_atof (int type, char *litP, int *sizeP)
2168 {
2169 return ieee_md_atof (type, litP, sizeP, TARGET_BYTES_BIG_ENDIAN);
2170 }
2171
2172 void
2173 md_number_to_chars (char *buf, valueT val, int n)
2174 {
2175 number_to_chars_littleendian (buf, val, n);
2176 }
2177
2178 const char *md_shortopts = "O::g::G:";
2179
2180 enum options
2181 {
2182 OPTION_MARCH = OPTION_MD_BASE,
2183 OPTION_PIC,
2184 OPTION_NO_PIC,
2185 OPTION_MABI,
2186 OPTION_RELAX,
2187 OPTION_NO_RELAX,
2188 OPTION_ARCH_ATTR,
2189 OPTION_NO_ARCH_ATTR,
2190 OPTION_END_OF_ENUM
2191 };
2192
2193 struct option md_longopts[] =
2194 {
2195 {"march", required_argument, NULL, OPTION_MARCH},
2196 {"fPIC", no_argument, NULL, OPTION_PIC},
2197 {"fpic", no_argument, NULL, OPTION_PIC},
2198 {"fno-pic", no_argument, NULL, OPTION_NO_PIC},
2199 {"mabi", required_argument, NULL, OPTION_MABI},
2200 {"mrelax", no_argument, NULL, OPTION_RELAX},
2201 {"mno-relax", no_argument, NULL, OPTION_NO_RELAX},
2202 {"march-attr", no_argument, NULL, OPTION_ARCH_ATTR},
2203 {"mno-arch-attr", no_argument, NULL, OPTION_NO_ARCH_ATTR},
2204
2205 {NULL, no_argument, NULL, 0}
2206 };
2207 size_t md_longopts_size = sizeof (md_longopts);
2208
2209 enum float_abi {
2210 FLOAT_ABI_DEFAULT = -1,
2211 FLOAT_ABI_SOFT,
2212 FLOAT_ABI_SINGLE,
2213 FLOAT_ABI_DOUBLE,
2214 FLOAT_ABI_QUAD
2215 };
2216 static enum float_abi float_abi = FLOAT_ABI_DEFAULT;
2217
2218 static void
2219 riscv_set_abi (unsigned new_xlen, enum float_abi new_float_abi, bfd_boolean rve)
2220 {
2221 abi_xlen = new_xlen;
2222 float_abi = new_float_abi;
2223 rve_abi = rve;
2224 }
2225
2226 int
2227 md_parse_option (int c, const char *arg)
2228 {
2229 switch (c)
2230 {
2231 case OPTION_MARCH:
2232 riscv_set_arch (arg);
2233 break;
2234
2235 case OPTION_NO_PIC:
2236 riscv_opts.pic = FALSE;
2237 break;
2238
2239 case OPTION_PIC:
2240 riscv_opts.pic = TRUE;
2241 break;
2242
2243 case OPTION_MABI:
2244 if (strcmp (arg, "ilp32") == 0)
2245 riscv_set_abi (32, FLOAT_ABI_SOFT, FALSE);
2246 else if (strcmp (arg, "ilp32e") == 0)
2247 riscv_set_abi (32, FLOAT_ABI_SOFT, TRUE);
2248 else if (strcmp (arg, "ilp32f") == 0)
2249 riscv_set_abi (32, FLOAT_ABI_SINGLE, FALSE);
2250 else if (strcmp (arg, "ilp32d") == 0)
2251 riscv_set_abi (32, FLOAT_ABI_DOUBLE, FALSE);
2252 else if (strcmp (arg, "ilp32q") == 0)
2253 riscv_set_abi (32, FLOAT_ABI_QUAD, FALSE);
2254 else if (strcmp (arg, "lp64") == 0)
2255 riscv_set_abi (64, FLOAT_ABI_SOFT, FALSE);
2256 else if (strcmp (arg, "lp64f") == 0)
2257 riscv_set_abi (64, FLOAT_ABI_SINGLE, FALSE);
2258 else if (strcmp (arg, "lp64d") == 0)
2259 riscv_set_abi (64, FLOAT_ABI_DOUBLE, FALSE);
2260 else if (strcmp (arg, "lp64q") == 0)
2261 riscv_set_abi (64, FLOAT_ABI_QUAD, FALSE);
2262 else
2263 return 0;
2264 break;
2265
2266 case OPTION_RELAX:
2267 riscv_opts.relax = TRUE;
2268 break;
2269
2270 case OPTION_NO_RELAX:
2271 riscv_opts.relax = FALSE;
2272 break;
2273
2274 case OPTION_ARCH_ATTR:
2275 riscv_opts.arch_attr = TRUE;
2276 break;
2277
2278 case OPTION_NO_ARCH_ATTR:
2279 riscv_opts.arch_attr = FALSE;
2280 break;
2281
2282 default:
2283 return 0;
2284 }
2285
2286 return 1;
2287 }
2288
2289 void
2290 riscv_after_parse_args (void)
2291 {
2292 if (xlen == 0)
2293 {
2294 if (strcmp (default_arch, "riscv32") == 0)
2295 xlen = 32;
2296 else if (strcmp (default_arch, "riscv64") == 0)
2297 xlen = 64;
2298 else
2299 as_bad ("unknown default architecture `%s'", default_arch);
2300 }
2301
2302 if (riscv_subsets.head == NULL)
2303 riscv_set_arch (xlen == 64 ? "rv64g" : "rv32g");
2304
2305 /* Add the RVC extension, regardless of -march, to support .option rvc. */
2306 riscv_set_rvc (FALSE);
2307 if (riscv_subset_supports ("c"))
2308 riscv_set_rvc (TRUE);
2309
2310 /* Enable RVE if specified by the -march option. */
2311 riscv_set_rve (FALSE);
2312 if (riscv_subset_supports ("e"))
2313 riscv_set_rve (TRUE);
2314
2315 /* Infer ABI from ISA if not specified on command line. */
2316 if (abi_xlen == 0)
2317 abi_xlen = xlen;
2318 else if (abi_xlen > xlen)
2319 as_bad ("can't have %d-bit ABI on %d-bit ISA", abi_xlen, xlen);
2320 else if (abi_xlen < xlen)
2321 as_bad ("%d-bit ABI not yet supported on %d-bit ISA", abi_xlen, xlen);
2322
2323 if (float_abi == FLOAT_ABI_DEFAULT)
2324 {
2325 riscv_subset_t *subset;
2326
2327 /* Assume soft-float unless D extension is present. */
2328 float_abi = FLOAT_ABI_SOFT;
2329
2330 for (subset = riscv_subsets.head; subset != NULL; subset = subset->next)
2331 {
2332 if (strcasecmp (subset->name, "D") == 0)
2333 float_abi = FLOAT_ABI_DOUBLE;
2334 if (strcasecmp (subset->name, "Q") == 0)
2335 float_abi = FLOAT_ABI_QUAD;
2336 }
2337 }
2338
2339 if (rve_abi)
2340 elf_flags |= EF_RISCV_RVE;
2341
2342 /* Insert float_abi into the EF_RISCV_FLOAT_ABI field of elf_flags. */
2343 elf_flags |= float_abi * (EF_RISCV_FLOAT_ABI & ~(EF_RISCV_FLOAT_ABI << 1));
2344 }
2345
2346 long
2347 md_pcrel_from (fixS *fixP)
2348 {
2349 return fixP->fx_where + fixP->fx_frag->fr_address;
2350 }
2351
2352 /* Apply a fixup to the object file. */
2353
2354 void
2355 md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
2356 {
2357 unsigned int subtype;
2358 bfd_byte *buf = (bfd_byte *) (fixP->fx_frag->fr_literal + fixP->fx_where);
2359 bfd_boolean relaxable = FALSE;
2360 offsetT loc;
2361 segT sub_segment;
2362
2363 /* Remember value for tc_gen_reloc. */
2364 fixP->fx_addnumber = *valP;
2365
2366 switch (fixP->fx_r_type)
2367 {
2368 case BFD_RELOC_RISCV_HI20:
2369 case BFD_RELOC_RISCV_LO12_I:
2370 case BFD_RELOC_RISCV_LO12_S:
2371 bfd_putl32 (riscv_apply_const_reloc (fixP->fx_r_type, *valP)
2372 | bfd_getl32 (buf), buf);
2373 if (fixP->fx_addsy == NULL)
2374 fixP->fx_done = TRUE;
2375 relaxable = TRUE;
2376 break;
2377
2378 case BFD_RELOC_RISCV_GOT_HI20:
2379 case BFD_RELOC_RISCV_ADD8:
2380 case BFD_RELOC_RISCV_ADD16:
2381 case BFD_RELOC_RISCV_ADD32:
2382 case BFD_RELOC_RISCV_ADD64:
2383 case BFD_RELOC_RISCV_SUB6:
2384 case BFD_RELOC_RISCV_SUB8:
2385 case BFD_RELOC_RISCV_SUB16:
2386 case BFD_RELOC_RISCV_SUB32:
2387 case BFD_RELOC_RISCV_SUB64:
2388 case BFD_RELOC_RISCV_RELAX:
2389 break;
2390
2391 case BFD_RELOC_RISCV_TPREL_HI20:
2392 case BFD_RELOC_RISCV_TPREL_LO12_I:
2393 case BFD_RELOC_RISCV_TPREL_LO12_S:
2394 case BFD_RELOC_RISCV_TPREL_ADD:
2395 relaxable = TRUE;
2396 /* Fall through. */
2397
2398 case BFD_RELOC_RISCV_TLS_GOT_HI20:
2399 case BFD_RELOC_RISCV_TLS_GD_HI20:
2400 case BFD_RELOC_RISCV_TLS_DTPREL32:
2401 case BFD_RELOC_RISCV_TLS_DTPREL64:
2402 if (fixP->fx_addsy != NULL)
2403 S_SET_THREAD_LOCAL (fixP->fx_addsy);
2404 else
2405 as_bad_where (fixP->fx_file, fixP->fx_line,
2406 _("TLS relocation against a constant"));
2407 break;
2408
2409 case BFD_RELOC_32:
2410 /* Use pc-relative relocation for FDE initial location.
2411 The symbol address in .eh_frame may be adjusted in
2412 _bfd_elf_discard_section_eh_frame, and the content of
2413 .eh_frame will be adjusted in _bfd_elf_write_section_eh_frame.
2414 Therefore, we cannot insert a relocation whose addend symbol is
2415 in .eh_frame. Othrewise, the value may be adjusted twice.*/
2416 if (fixP->fx_addsy && fixP->fx_subsy
2417 && (sub_segment = S_GET_SEGMENT (fixP->fx_subsy))
2418 && strcmp (sub_segment->name, ".eh_frame") == 0
2419 && S_GET_VALUE (fixP->fx_subsy)
2420 == fixP->fx_frag->fr_address + fixP->fx_where)
2421 {
2422 fixP->fx_r_type = BFD_RELOC_RISCV_32_PCREL;
2423 fixP->fx_subsy = NULL;
2424 break;
2425 }
2426 /* Fall through. */
2427 case BFD_RELOC_64:
2428 case BFD_RELOC_16:
2429 case BFD_RELOC_8:
2430 case BFD_RELOC_RISCV_CFA:
2431 if (fixP->fx_addsy && fixP->fx_subsy)
2432 {
2433 fixP->fx_next = xmemdup (fixP, sizeof (*fixP), sizeof (*fixP));
2434 fixP->fx_next->fx_addsy = fixP->fx_subsy;
2435 fixP->fx_next->fx_subsy = NULL;
2436 fixP->fx_next->fx_offset = 0;
2437 fixP->fx_subsy = NULL;
2438
2439 switch (fixP->fx_r_type)
2440 {
2441 case BFD_RELOC_64:
2442 fixP->fx_r_type = BFD_RELOC_RISCV_ADD64;
2443 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB64;
2444 break;
2445
2446 case BFD_RELOC_32:
2447 fixP->fx_r_type = BFD_RELOC_RISCV_ADD32;
2448 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB32;
2449 break;
2450
2451 case BFD_RELOC_16:
2452 fixP->fx_r_type = BFD_RELOC_RISCV_ADD16;
2453 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB16;
2454 break;
2455
2456 case BFD_RELOC_8:
2457 fixP->fx_r_type = BFD_RELOC_RISCV_ADD8;
2458 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB8;
2459 break;
2460
2461 case BFD_RELOC_RISCV_CFA:
2462 /* Load the byte to get the subtype. */
2463 subtype = bfd_get_8 (NULL, &((fragS *) (fixP->fx_frag->fr_opcode))->fr_literal[fixP->fx_where]);
2464 loc = fixP->fx_frag->fr_fix - (subtype & 7);
2465 switch (subtype)
2466 {
2467 case DW_CFA_advance_loc1:
2468 fixP->fx_where = loc + 1;
2469 fixP->fx_next->fx_where = loc + 1;
2470 fixP->fx_r_type = BFD_RELOC_RISCV_SET8;
2471 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB8;
2472 break;
2473
2474 case DW_CFA_advance_loc2:
2475 fixP->fx_size = 2;
2476 fixP->fx_next->fx_size = 2;
2477 fixP->fx_where = loc + 1;
2478 fixP->fx_next->fx_where = loc + 1;
2479 fixP->fx_r_type = BFD_RELOC_RISCV_SET16;
2480 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB16;
2481 break;
2482
2483 case DW_CFA_advance_loc4:
2484 fixP->fx_size = 4;
2485 fixP->fx_next->fx_size = 4;
2486 fixP->fx_where = loc;
2487 fixP->fx_next->fx_where = loc;
2488 fixP->fx_r_type = BFD_RELOC_RISCV_SET32;
2489 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB32;
2490 break;
2491
2492 default:
2493 if (subtype < 0x80 && (subtype & 0x40))
2494 {
2495 /* DW_CFA_advance_loc */
2496 fixP->fx_frag = (fragS *) fixP->fx_frag->fr_opcode;
2497 fixP->fx_next->fx_frag = fixP->fx_frag;
2498 fixP->fx_r_type = BFD_RELOC_RISCV_SET6;
2499 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_SUB6;
2500 }
2501 else
2502 as_fatal (_("internal error: bad CFA value #%d"), subtype);
2503 break;
2504 }
2505 break;
2506
2507 default:
2508 /* This case is unreachable. */
2509 abort ();
2510 }
2511 }
2512 /* Fall through. */
2513
2514 case BFD_RELOC_RVA:
2515 /* If we are deleting this reloc entry, we must fill in the
2516 value now. This can happen if we have a .word which is not
2517 resolved when it appears but is later defined. */
2518 if (fixP->fx_addsy == NULL)
2519 {
2520 gas_assert (fixP->fx_size <= sizeof (valueT));
2521 md_number_to_chars ((char *) buf, *valP, fixP->fx_size);
2522 fixP->fx_done = 1;
2523 }
2524 break;
2525
2526 case BFD_RELOC_RISCV_JMP:
2527 if (fixP->fx_addsy)
2528 {
2529 /* Fill in a tentative value to improve objdump readability. */
2530 bfd_vma target = S_GET_VALUE (fixP->fx_addsy) + *valP;
2531 bfd_vma delta = target - md_pcrel_from (fixP);
2532 bfd_putl32 (bfd_getl32 (buf) | ENCODE_UJTYPE_IMM (delta), buf);
2533 }
2534 break;
2535
2536 case BFD_RELOC_12_PCREL:
2537 if (fixP->fx_addsy)
2538 {
2539 /* Fill in a tentative value to improve objdump readability. */
2540 bfd_vma target = S_GET_VALUE (fixP->fx_addsy) + *valP;
2541 bfd_vma delta = target - md_pcrel_from (fixP);
2542 bfd_putl32 (bfd_getl32 (buf) | ENCODE_SBTYPE_IMM (delta), buf);
2543 }
2544 break;
2545
2546 case BFD_RELOC_RISCV_RVC_BRANCH:
2547 if (fixP->fx_addsy)
2548 {
2549 /* Fill in a tentative value to improve objdump readability. */
2550 bfd_vma target = S_GET_VALUE (fixP->fx_addsy) + *valP;
2551 bfd_vma delta = target - md_pcrel_from (fixP);
2552 bfd_putl16 (bfd_getl16 (buf) | ENCODE_RVC_B_IMM (delta), buf);
2553 }
2554 break;
2555
2556 case BFD_RELOC_RISCV_RVC_JUMP:
2557 if (fixP->fx_addsy)
2558 {
2559 /* Fill in a tentative value to improve objdump readability. */
2560 bfd_vma target = S_GET_VALUE (fixP->fx_addsy) + *valP;
2561 bfd_vma delta = target - md_pcrel_from (fixP);
2562 bfd_putl16 (bfd_getl16 (buf) | ENCODE_RVC_J_IMM (delta), buf);
2563 }
2564 break;
2565
2566 case BFD_RELOC_RISCV_CALL:
2567 case BFD_RELOC_RISCV_CALL_PLT:
2568 relaxable = TRUE;
2569 break;
2570
2571 case BFD_RELOC_RISCV_PCREL_HI20:
2572 case BFD_RELOC_RISCV_PCREL_LO12_S:
2573 case BFD_RELOC_RISCV_PCREL_LO12_I:
2574 relaxable = riscv_opts.relax;
2575 break;
2576
2577 case BFD_RELOC_RISCV_ALIGN:
2578 break;
2579
2580 default:
2581 /* We ignore generic BFD relocations we don't know about. */
2582 if (bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type) != NULL)
2583 as_fatal (_("internal error: bad relocation #%d"), fixP->fx_r_type);
2584 }
2585
2586 if (fixP->fx_subsy != NULL)
2587 as_bad_where (fixP->fx_file, fixP->fx_line,
2588 _("unsupported symbol subtraction"));
2589
2590 /* Add an R_RISCV_RELAX reloc if the reloc is relaxable. */
2591 if (relaxable && fixP->fx_tcbit && fixP->fx_addsy != NULL)
2592 {
2593 fixP->fx_next = xmemdup (fixP, sizeof (*fixP), sizeof (*fixP));
2594 fixP->fx_next->fx_addsy = fixP->fx_next->fx_subsy = NULL;
2595 fixP->fx_next->fx_r_type = BFD_RELOC_RISCV_RELAX;
2596 }
2597 }
2598
2599 /* Because the value of .cfi_remember_state may changed after relaxation,
2600 we insert a fix to relocate it again in link-time. */
2601
2602 void
2603 riscv_pre_output_hook (void)
2604 {
2605 const frchainS *frch;
2606 const asection *s;
2607
2608 for (s = stdoutput->sections; s; s = s->next)
2609 for (frch = seg_info (s)->frchainP; frch; frch = frch->frch_next)
2610 {
2611 fragS *frag;
2612
2613 for (frag = frch->frch_root; frag; frag = frag->fr_next)
2614 {
2615 if (frag->fr_type == rs_cfa)
2616 {
2617 expressionS exp;
2618 expressionS *symval;
2619
2620 symval = symbol_get_value_expression (frag->fr_symbol);
2621 exp.X_op = O_subtract;
2622 exp.X_add_symbol = symval->X_add_symbol;
2623 exp.X_add_number = 0;
2624 exp.X_op_symbol = symval->X_op_symbol;
2625
2626 fix_new_exp (frag, (int) frag->fr_offset, 1, &exp, 0,
2627 BFD_RELOC_RISCV_CFA);
2628 }
2629 }
2630 }
2631 }
2632
2633
2634 /* This structure is used to hold a stack of .option values. */
2635
2636 struct riscv_option_stack
2637 {
2638 struct riscv_option_stack *next;
2639 struct riscv_set_options options;
2640 };
2641
2642 static struct riscv_option_stack *riscv_opts_stack;
2643
2644 /* Handle the .option pseudo-op. */
2645
2646 static void
2647 s_riscv_option (int x ATTRIBUTE_UNUSED)
2648 {
2649 char *name = input_line_pointer, ch;
2650
2651 while (!is_end_of_line[(unsigned char) *input_line_pointer])
2652 ++input_line_pointer;
2653 ch = *input_line_pointer;
2654 *input_line_pointer = '\0';
2655
2656 if (strcmp (name, "rvc") == 0)
2657 riscv_set_rvc (TRUE);
2658 else if (strcmp (name, "norvc") == 0)
2659 riscv_set_rvc (FALSE);
2660 else if (strcmp (name, "pic") == 0)
2661 riscv_opts.pic = TRUE;
2662 else if (strcmp (name, "nopic") == 0)
2663 riscv_opts.pic = FALSE;
2664 else if (strcmp (name, "relax") == 0)
2665 riscv_opts.relax = TRUE;
2666 else if (strcmp (name, "norelax") == 0)
2667 riscv_opts.relax = FALSE;
2668 else if (strcmp (name, "push") == 0)
2669 {
2670 struct riscv_option_stack *s;
2671
2672 s = (struct riscv_option_stack *) xmalloc (sizeof *s);
2673 s->next = riscv_opts_stack;
2674 s->options = riscv_opts;
2675 riscv_opts_stack = s;
2676 }
2677 else if (strcmp (name, "pop") == 0)
2678 {
2679 struct riscv_option_stack *s;
2680
2681 s = riscv_opts_stack;
2682 if (s == NULL)
2683 as_bad (_(".option pop with no .option push"));
2684 else
2685 {
2686 riscv_opts = s->options;
2687 riscv_opts_stack = s->next;
2688 free (s);
2689 }
2690 }
2691 else
2692 {
2693 as_warn (_("Unrecognized .option directive: %s\n"), name);
2694 }
2695 *input_line_pointer = ch;
2696 demand_empty_rest_of_line ();
2697 }
2698
2699 /* Handle the .dtprelword and .dtpreldword pseudo-ops. They generate
2700 a 32-bit or 64-bit DTP-relative relocation (BYTES says which) for
2701 use in DWARF debug information. */
2702
2703 static void
2704 s_dtprel (int bytes)
2705 {
2706 expressionS ex;
2707 char *p;
2708
2709 expression (&ex);
2710
2711 if (ex.X_op != O_symbol)
2712 {
2713 as_bad (_("Unsupported use of %s"), (bytes == 8
2714 ? ".dtpreldword"
2715 : ".dtprelword"));
2716 ignore_rest_of_line ();
2717 }
2718
2719 p = frag_more (bytes);
2720 md_number_to_chars (p, 0, bytes);
2721 fix_new_exp (frag_now, p - frag_now->fr_literal, bytes, &ex, FALSE,
2722 (bytes == 8
2723 ? BFD_RELOC_RISCV_TLS_DTPREL64
2724 : BFD_RELOC_RISCV_TLS_DTPREL32));
2725
2726 demand_empty_rest_of_line ();
2727 }
2728
2729 /* Handle the .bss pseudo-op. */
2730
2731 static void
2732 s_bss (int ignore ATTRIBUTE_UNUSED)
2733 {
2734 subseg_set (bss_section, 0);
2735 demand_empty_rest_of_line ();
2736 }
2737
2738 static void
2739 riscv_make_nops (char *buf, bfd_vma bytes)
2740 {
2741 bfd_vma i = 0;
2742
2743 /* RISC-V instructions cannot begin or end on odd addresses, so this case
2744 means we are not within a valid instruction sequence. It is thus safe
2745 to use a zero byte, even though that is not a valid instruction. */
2746 if (bytes % 2 == 1)
2747 buf[i++] = 0;
2748
2749 /* Use at most one 2-byte NOP. */
2750 if ((bytes - i) % 4 == 2)
2751 {
2752 md_number_to_chars (buf + i, RVC_NOP, 2);
2753 i += 2;
2754 }
2755
2756 /* Fill the remainder with 4-byte NOPs. */
2757 for ( ; i < bytes; i += 4)
2758 md_number_to_chars (buf + i, RISCV_NOP, 4);
2759 }
2760
2761 /* Called from md_do_align. Used to create an alignment frag in a
2762 code section by emitting a worst-case NOP sequence that the linker
2763 will later relax to the correct number of NOPs. We can't compute
2764 the correct alignment now because of other linker relaxations. */
2765
2766 bfd_boolean
2767 riscv_frag_align_code (int n)
2768 {
2769 bfd_vma bytes = (bfd_vma) 1 << n;
2770 bfd_vma insn_alignment = riscv_opts.rvc ? 2 : 4;
2771 bfd_vma worst_case_bytes = bytes - insn_alignment;
2772 char *nops;
2773 expressionS ex;
2774
2775 /* If we are moving to a smaller alignment than the instruction size, then no
2776 alignment is required. */
2777 if (bytes <= insn_alignment)
2778 return TRUE;
2779
2780 /* When not relaxing, riscv_handle_align handles code alignment. */
2781 if (!riscv_opts.relax)
2782 return FALSE;
2783
2784 nops = frag_more (worst_case_bytes);
2785
2786 ex.X_op = O_constant;
2787 ex.X_add_number = worst_case_bytes;
2788
2789 riscv_make_nops (nops, worst_case_bytes);
2790
2791 fix_new_exp (frag_now, nops - frag_now->fr_literal, 0,
2792 &ex, FALSE, BFD_RELOC_RISCV_ALIGN);
2793
2794 return TRUE;
2795 }
2796
2797 /* Implement HANDLE_ALIGN. */
2798
2799 void
2800 riscv_handle_align (fragS *fragP)
2801 {
2802 switch (fragP->fr_type)
2803 {
2804 case rs_align_code:
2805 /* When relaxing, riscv_frag_align_code handles code alignment. */
2806 if (!riscv_opts.relax)
2807 {
2808 bfd_signed_vma bytes = (fragP->fr_next->fr_address
2809 - fragP->fr_address - fragP->fr_fix);
2810 /* We have 4 byte uncompressed nops. */
2811 bfd_signed_vma size = 4;
2812 bfd_signed_vma excess = bytes % size;
2813 char *p = fragP->fr_literal + fragP->fr_fix;
2814
2815 if (bytes <= 0)
2816 break;
2817
2818 /* Insert zeros or compressed nops to get 4 byte alignment. */
2819 if (excess)
2820 {
2821 riscv_make_nops (p, excess);
2822 fragP->fr_fix += excess;
2823 p += excess;
2824 }
2825
2826 /* Insert variable number of 4 byte uncompressed nops. */
2827 riscv_make_nops (p, size);
2828 fragP->fr_var = size;
2829 }
2830 break;
2831
2832 default:
2833 break;
2834 }
2835 }
2836
2837 int
2838 md_estimate_size_before_relax (fragS *fragp, asection *segtype)
2839 {
2840 return (fragp->fr_var = relaxed_branch_length (fragp, segtype, FALSE));
2841 }
2842
2843 /* Translate internal representation of relocation info to BFD target
2844 format. */
2845
2846 arelent *
2847 tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
2848 {
2849 arelent *reloc = (arelent *) xmalloc (sizeof (arelent));
2850
2851 reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
2852 *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
2853 reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
2854 reloc->addend = fixp->fx_addnumber;
2855
2856 reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
2857 if (reloc->howto == NULL)
2858 {
2859 if ((fixp->fx_r_type == BFD_RELOC_16 || fixp->fx_r_type == BFD_RELOC_8)
2860 && fixp->fx_addsy != NULL && fixp->fx_subsy != NULL)
2861 {
2862 /* We don't have R_RISCV_8/16, but for this special case,
2863 we can use R_RISCV_ADD8/16 with R_RISCV_SUB8/16. */
2864 return reloc;
2865 }
2866
2867 as_bad_where (fixp->fx_file, fixp->fx_line,
2868 _("cannot represent %s relocation in object file"),
2869 bfd_get_reloc_code_name (fixp->fx_r_type));
2870 return NULL;
2871 }
2872
2873 return reloc;
2874 }
2875
2876 int
2877 riscv_relax_frag (asection *sec, fragS *fragp, long stretch ATTRIBUTE_UNUSED)
2878 {
2879 if (RELAX_BRANCH_P (fragp->fr_subtype))
2880 {
2881 offsetT old_var = fragp->fr_var;
2882 fragp->fr_var = relaxed_branch_length (fragp, sec, TRUE);
2883 return fragp->fr_var - old_var;
2884 }
2885
2886 return 0;
2887 }
2888
2889 /* Expand far branches to multi-instruction sequences. */
2890
2891 static void
2892 md_convert_frag_branch (fragS *fragp)
2893 {
2894 bfd_byte *buf;
2895 expressionS exp;
2896 fixS *fixp;
2897 insn_t insn;
2898 int rs1, reloc;
2899
2900 buf = (bfd_byte *)fragp->fr_literal + fragp->fr_fix;
2901
2902 exp.X_op = O_symbol;
2903 exp.X_add_symbol = fragp->fr_symbol;
2904 exp.X_add_number = fragp->fr_offset;
2905
2906 gas_assert (fragp->fr_var == RELAX_BRANCH_LENGTH (fragp->fr_subtype));
2907
2908 if (RELAX_BRANCH_RVC (fragp->fr_subtype))
2909 {
2910 switch (RELAX_BRANCH_LENGTH (fragp->fr_subtype))
2911 {
2912 case 8:
2913 case 4:
2914 /* Expand the RVC branch into a RISC-V one. */
2915 insn = bfd_getl16 (buf);
2916 rs1 = 8 + ((insn >> OP_SH_CRS1S) & OP_MASK_CRS1S);
2917 if ((insn & MASK_C_J) == MATCH_C_J)
2918 insn = MATCH_JAL;
2919 else if ((insn & MASK_C_JAL) == MATCH_C_JAL)
2920 insn = MATCH_JAL | (X_RA << OP_SH_RD);
2921 else if ((insn & MASK_C_BEQZ) == MATCH_C_BEQZ)
2922 insn = MATCH_BEQ | (rs1 << OP_SH_RS1);
2923 else if ((insn & MASK_C_BNEZ) == MATCH_C_BNEZ)
2924 insn = MATCH_BNE | (rs1 << OP_SH_RS1);
2925 else
2926 abort ();
2927 bfd_putl32 (insn, buf);
2928 break;
2929
2930 case 6:
2931 /* Invert the branch condition. Branch over the jump. */
2932 insn = bfd_getl16 (buf);
2933 insn ^= MATCH_C_BEQZ ^ MATCH_C_BNEZ;
2934 insn |= ENCODE_RVC_B_IMM (6);
2935 bfd_putl16 (insn, buf);
2936 buf += 2;
2937 goto jump;
2938
2939 case 2:
2940 /* Just keep the RVC branch. */
2941 reloc = RELAX_BRANCH_UNCOND (fragp->fr_subtype)
2942 ? BFD_RELOC_RISCV_RVC_JUMP : BFD_RELOC_RISCV_RVC_BRANCH;
2943 fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
2944 2, &exp, FALSE, reloc);
2945 buf += 2;
2946 goto done;
2947
2948 default:
2949 abort ();
2950 }
2951 }
2952
2953 switch (RELAX_BRANCH_LENGTH (fragp->fr_subtype))
2954 {
2955 case 8:
2956 gas_assert (!RELAX_BRANCH_UNCOND (fragp->fr_subtype));
2957
2958 /* Invert the branch condition. Branch over the jump. */
2959 insn = bfd_getl32 (buf);
2960 insn ^= MATCH_BEQ ^ MATCH_BNE;
2961 insn |= ENCODE_SBTYPE_IMM (8);
2962 md_number_to_chars ((char *) buf, insn, 4);
2963 buf += 4;
2964
2965 jump:
2966 /* Jump to the target. */
2967 fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
2968 4, &exp, FALSE, BFD_RELOC_RISCV_JMP);
2969 md_number_to_chars ((char *) buf, MATCH_JAL, 4);
2970 buf += 4;
2971 break;
2972
2973 case 4:
2974 reloc = RELAX_BRANCH_UNCOND (fragp->fr_subtype)
2975 ? BFD_RELOC_RISCV_JMP : BFD_RELOC_12_PCREL;
2976 fixp = fix_new_exp (fragp, buf - (bfd_byte *)fragp->fr_literal,
2977 4, &exp, FALSE, reloc);
2978 buf += 4;
2979 break;
2980
2981 default:
2982 abort ();
2983 }
2984
2985 done:
2986 fixp->fx_file = fragp->fr_file;
2987 fixp->fx_line = fragp->fr_line;
2988
2989 gas_assert (buf == (bfd_byte *)fragp->fr_literal
2990 + fragp->fr_fix + fragp->fr_var);
2991
2992 fragp->fr_fix += fragp->fr_var;
2993 }
2994
2995 /* Relax a machine dependent frag. This returns the amount by which
2996 the current size of the frag should change. */
2997
2998 void
2999 md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT asec ATTRIBUTE_UNUSED,
3000 fragS *fragp)
3001 {
3002 gas_assert (RELAX_BRANCH_P (fragp->fr_subtype));
3003 md_convert_frag_branch (fragp);
3004 }
3005
3006 void
3007 md_show_usage (FILE *stream)
3008 {
3009 fprintf (stream, _("\
3010 RISC-V options:\n\
3011 -fpic generate position-independent code\n\
3012 -fno-pic don't generate position-independent code (default)\n\
3013 -march=ISA set the RISC-V architecture\n\
3014 -mabi=ABI set the RISC-V ABI\n\
3015 -mrelax enable relax (default)\n\
3016 -mno-relax disable relax\n\
3017 -march-attr generate RISC-V arch attribute\n\
3018 -mno-arch-attr don't generate RISC-V arch attribute\n\
3019 "));
3020 }
3021
3022 /* Standard calling conventions leave the CFA at SP on entry. */
3023 void
3024 riscv_cfi_frame_initial_instructions (void)
3025 {
3026 cfi_add_CFA_def_cfa_register (X_SP);
3027 }
3028
3029 int
3030 tc_riscv_regname_to_dw2regnum (char *regname)
3031 {
3032 int reg;
3033
3034 if ((reg = reg_lookup_internal (regname, RCLASS_GPR)) >= 0)
3035 return reg;
3036
3037 if ((reg = reg_lookup_internal (regname, RCLASS_FPR)) >= 0)
3038 return reg + 32;
3039
3040 as_bad (_("unknown register `%s'"), regname);
3041 return -1;
3042 }
3043
3044 void
3045 riscv_elf_final_processing (void)
3046 {
3047 elf_elfheader (stdoutput)->e_flags |= elf_flags;
3048 }
3049
3050 /* Parse the .sleb128 and .uleb128 pseudos. Only allow constant expressions,
3051 since these directives break relaxation when used with symbol deltas. */
3052
3053 static void
3054 s_riscv_leb128 (int sign)
3055 {
3056 expressionS exp;
3057 char *save_in = input_line_pointer;
3058
3059 expression (&exp);
3060 if (exp.X_op != O_constant)
3061 as_bad (_("non-constant .%cleb128 is not supported"), sign ? 's' : 'u');
3062 demand_empty_rest_of_line ();
3063
3064 input_line_pointer = save_in;
3065 return s_leb128 (sign);
3066 }
3067
3068 /* Parse the .insn directive. */
3069
3070 static void
3071 s_riscv_insn (int x ATTRIBUTE_UNUSED)
3072 {
3073 char *str = input_line_pointer;
3074 struct riscv_cl_insn insn;
3075 expressionS imm_expr;
3076 bfd_reloc_code_real_type imm_reloc = BFD_RELOC_UNUSED;
3077 char save_c;
3078
3079 while (!is_end_of_line[(unsigned char) *input_line_pointer])
3080 ++input_line_pointer;
3081
3082 save_c = *input_line_pointer;
3083 *input_line_pointer = '\0';
3084
3085 const char *error = riscv_ip (str, &insn, &imm_expr,
3086 &imm_reloc, insn_type_hash);
3087
3088 if (error)
3089 {
3090 as_bad ("%s `%s'", error, str);
3091 }
3092 else
3093 {
3094 gas_assert (insn.insn_mo->pinfo != INSN_MACRO);
3095 append_insn (&insn, &imm_expr, imm_reloc);
3096 }
3097
3098 *input_line_pointer = save_c;
3099 demand_empty_rest_of_line ();
3100 }
3101
3102 /* Update arch attributes. */
3103
3104 static void
3105 riscv_write_out_arch_attr (void)
3106 {
3107 const char *arch_str = riscv_arch_str (xlen, &riscv_subsets);
3108
3109 bfd_elf_add_proc_attr_string (stdoutput, Tag_RISCV_arch, arch_str);
3110
3111 xfree ((void *)arch_str);
3112 }
3113
3114 /* Add the default contents for the .riscv.attributes section. */
3115
3116 static void
3117 riscv_set_public_attributes (void)
3118 {
3119 if (riscv_opts.arch_attr || explicit_arch_attr)
3120 /* Re-write arch attribute to normalize the arch string. */
3121 riscv_write_out_arch_attr ();
3122 }
3123
3124 /* Called after all assembly has been done. */
3125
3126 void
3127 riscv_md_end (void)
3128 {
3129 riscv_set_public_attributes ();
3130 }
3131
3132 /* Given a symbolic attribute NAME, return the proper integer value.
3133 Returns -1 if the attribute is not known. */
3134
3135 int
3136 riscv_convert_symbolic_attribute (const char *name)
3137 {
3138 static const struct
3139 {
3140 const char * name;
3141 const int tag;
3142 }
3143 attribute_table[] =
3144 {
3145 /* When you modify this table you should
3146 also modify the list in doc/c-riscv.texi. */
3147 #define T(tag) {#tag, Tag_RISCV_##tag}, {"Tag_RISCV_" #tag, Tag_RISCV_##tag}
3148 T(arch),
3149 T(priv_spec),
3150 T(priv_spec_minor),
3151 T(priv_spec_revision),
3152 T(unaligned_access),
3153 T(stack_align),
3154 #undef T
3155 };
3156
3157 unsigned int i;
3158
3159 if (name == NULL)
3160 return -1;
3161
3162 for (i = 0; i < ARRAY_SIZE (attribute_table); i++)
3163 if (strcmp (name, attribute_table[i].name) == 0)
3164 return attribute_table[i].tag;
3165
3166 return -1;
3167 }
3168
3169 /* Parse a .attribute directive. */
3170
3171 static void
3172 s_riscv_attribute (int ignored ATTRIBUTE_UNUSED)
3173 {
3174 int tag = obj_elf_vendor_attribute (OBJ_ATTR_PROC);
3175
3176 if (tag == Tag_RISCV_arch)
3177 {
3178 unsigned old_xlen = xlen;
3179
3180 explicit_arch_attr = TRUE;
3181 obj_attribute *attr;
3182 attr = elf_known_obj_attributes_proc (stdoutput);
3183 if (!start_assemble)
3184 riscv_set_arch (attr[Tag_RISCV_arch].s);
3185 else
3186 as_fatal (_(".attribute arch must set before any instructions"));
3187
3188 if (old_xlen != xlen)
3189 {
3190 /* We must re-init bfd again if xlen is changed. */
3191 unsigned long mach = xlen == 64 ? bfd_mach_riscv64 : bfd_mach_riscv32;
3192 bfd_find_target (riscv_target_format (), stdoutput);
3193
3194 if (! bfd_set_arch_mach (stdoutput, bfd_arch_riscv, mach))
3195 as_warn (_("Could not set architecture and machine"));
3196 }
3197 }
3198 }
3199
3200 /* Pseudo-op table. */
3201
3202 static const pseudo_typeS riscv_pseudo_table[] =
3203 {
3204 /* RISC-V-specific pseudo-ops. */
3205 {"option", s_riscv_option, 0},
3206 {"half", cons, 2},
3207 {"word", cons, 4},
3208 {"dword", cons, 8},
3209 {"dtprelword", s_dtprel, 4},
3210 {"dtpreldword", s_dtprel, 8},
3211 {"bss", s_bss, 0},
3212 {"uleb128", s_riscv_leb128, 0},
3213 {"sleb128", s_riscv_leb128, 1},
3214 {"insn", s_riscv_insn, 0},
3215 {"attribute", s_riscv_attribute, 0},
3216
3217 { NULL, NULL, 0 },
3218 };
3219
3220 void
3221 riscv_pop_insert (void)
3222 {
3223 extern void pop_insert (const pseudo_typeS *);
3224
3225 pop_insert (riscv_pseudo_table);
3226 }