]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - gas/configure.in
Grrr. The mn10200 and mn10300 are _not_ similar enough to easily support
[thirdparty/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
67
68 # check for architecture variants
69 case ${cpu} in
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
73 changequote(,)dnl
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
78 changequote([,])dnl
79 m8*) cpu_type=m88k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
87 *) cpu_type=${cpu} ;;
88 esac
89
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
93 continue
94 fi
95
96 targ=${cpu_type}
97 generic_target=${cpu_type}-$vendor-$os
98 dev=no
99 bfd_gas=no
100 em=generic
101
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
109
110 alpha-*-*vms*) fmt=evax ;;
111 alpha-*-netware*) fmt=ecoff ;;
112 alpha-*-osf*) fmt=ecoff ;;
113 alpha-*-linuxecoff*) fmt=ecoff ;;
114 alpha-*-linux*) fmt=elf em=linux ;;
115
116 # start-sanitize-arc
117 arc-*-elf*) fmt=elf bfd_gas=yes ;;
118 # end-sanitize-arc
119
120 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
121 arm-*-aout) fmt=aout
122 case "$endian" in
123 big) targ=arm-big ;;
124 *) targ=arm-lit ;;
125 esac
126 ;;
127 arm-*-coff) fmt=coff ;;
128 arm-*-riscix*) fmt=aout ;;
129 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
130
131 # start-sanitize-d10v
132 d10v-*-*) fmt=elf bfd_gas=yes ;;
133 # end-sanitize-d10v
134
135 hppa-*-*elf*) fmt=elf em=hppa ;;
136 hppa-*-lites*) fmt=elf em=hppa ;;
137 hppa-*-osf*) fmt=som em=hppa ;;
138 hppa-*-hpux*) fmt=som em=hppa ;;
139 hppa-*-bsd*) fmt=som em=hppa ;;
140 hppa-*-hiux*) fmt=som em=hppa ;;
141
142 h8300-*-coff) fmt=coff ;;
143
144 i386-ibm-aix*) fmt=coff targ=i386coff
145 em=i386aix ;;
146 i386-*-bsd*) fmt=aout em=386bsd ;;
147 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
148 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
149 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
150 i386-*-linux*coff*) fmt=coff em=linux
151 targ=i386coff ;;
152 i386-*-linux*) fmt=elf em=linux ;;
153 i386-*-lynxos*) fmt=coff targ=i386coff
154 em=lynx ;;
155 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
156 fmt=elf ;;
157 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
158 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
159 fmt=coff targ=i386coff ;;
160 i386-*-vsta) fmt=aout ;;
161 i386-*-go32) fmt=coff targ=i386coff ;;
162 i386-*-rtems*) fmt=coff targ=i386coff ;;
163 i386-*-gnu*) fmt=elf ;;
164 i386-*-mach*)
165 fmt=aout em=mach bfd_gas=yes ;;
166 i386-*-msdos*) fmt=aout ;;
167 i386-*-moss*) fmt=elf ;;
168 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
169 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
170 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
171 i960-*-bout) fmt=bout ;;
172 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
173 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
174 i960-*-nindy*) fmt=bout ;;
175 i960-*-vxworks4*) fmt=bout ;;
176 i960-*-vxworks5.0) fmt=bout ;;
177 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
178 i960-*-vxworks*) fmt=bout ;;
179
180 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
181 fmt=aout em=sun3 ;;
182 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
183 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
184 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
185 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
186 fmt=elf ;;
187 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
188 fmt=coff targ=m68kcoff ;;
189 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
190 m68k-*-linux*aout*) fmt=aout em=linux ;;
191 m68k-*-linux*) fmt=elf em=linux ;;
192 m68k-*-lynxos*) fmt=coff targ=m68kcoff
193 em=lynx ;;
194 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
195 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
196 m68k-*-psos*) fmt=elf em=psos;;
197
198 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
199 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
200
201 # don't change em like *-*-bsd does
202 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
203 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
204 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
205 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
206 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
207 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
208 mips-*-ecoff*) fmt=ecoff
209 case "$endian" in
210 big) targ=mips-big ;;
211 *) targ=mips-lit ;;
212 esac
213 ;;
214 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
215 mips-*-gnu*) fmt=aout
216 case "$endian" in
217 big) targ=mips-big ;;
218 *) targ=mips-lit ;;
219 esac
220 ;;
221 mips-*-irix6*) fmt=elf targ=mips-big ;;
222 mips-*-irix5*) fmt=elf targ=mips-big ;;
223 mips-*-irix*) fmt=ecoff targ=mips-big ;;
224 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
225 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
226 mips-*-elf* | mips-*-rtems*)
227 fmt=elf
228 case "$endian" in
229 big) targ=mips-big ;;
230 *) targ=mips-lit ;;
231 esac
232 ;;
233 mn10200-*-*) fmt=elf bfd_gas=yes ;;
234 mn10300-*-*) fmt=elf bfd_gas=yes ;;
235 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
236 fmt=coff em=pe
237 case "$endian" in
238 big) targ=ppc-big ;;
239 *) targ=ppc-lit ;;
240 esac
241 ;;
242 ppc-*-aix*) fmt=coff ;;
243 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
244 fmt=elf
245 case "$endian" in
246 big) targ=ppc-big ;;
247 *) targ=ppc-lit ;;
248 esac
249 ;;
250 ppc-*-linux*) fmt=elf
251 case "$endian" in
252 big) targ=ppc-big ;;
253 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
254 esac
255 ;;
256 ppc-*-solaris*) fmt=elf
257 case "$endian" in
258 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
259 *) targ=ppc-sol ;;
260 esac
261 ;;
262 ppc-*-rtems*)
263 fmt=elf
264 case "$endian" in
265 big) targ=ppc-big ;;
266 *) targ=ppc-lit ;;
267 esac
268 ;;
269 ppc-*-macos* | ppc-*-mpw*)
270 fmt=coff em=macos ;;
271 ppc-*-netware*) fmt=elf em=ppcnw ;;
272
273 sh-*-elf*) fmt=elf ;;
274 sh-*-coff*) fmt=coff ;;
275
276 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
277 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
278
279 sparc-*-rtems*) fmt=aout ;;
280 sparc-*-sunos4*) fmt=aout em=sun3 ;;
281 sparc-*-aout | sparc*-*-vxworks*)
282 fmt=aout em=sparcaout ;;
283 sparc-*-coff) fmt=coff ;;
284 sparc-*-lynxos*) fmt=coff em=lynx ;;
285 sparc-fujitsu-none) fmt=aout ;;
286 sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
287 fmt=elf ;;
288 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
289
290 v850-*-*) fmt=elf bfd_gas=yes ;;
291
292 vax-*-bsd* | vax-*-ultrix*)
293 fmt=aout ;;
294 vax-*-vms) fmt=vms ;;
295
296 z8k-*-coff | z8k-*-sim)
297 fmt=coff ;;
298
299 w65-*-*) fmt=coff ;;
300
301 *-*-aout | *-*-scout)
302 fmt=aout ;;
303 *-*-nindy*)
304 fmt=bout ;;
305 *-*-bsd*)
306 fmt=aout em=sun3 ;;
307 *-*-generic) fmt=generic ;;
308 *-*-xray | *-*-hms) fmt=coff ;;
309 *-*-sim) fmt=coff ;;
310 *-*-elf | *-*-sysv4* | *-*-solaris*)
311 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
312 fmt=elf dev=yes ;;
313 *-*-vxworks) fmt=aout ;;
314 *-*-netware) fmt=elf ;;
315 esac
316
317 case ${cpu_type}-${fmt} in
318 alpha-*) bfd_gas=yes ;;
319 arm-*) bfd_gas=yes ;;
320 # not yet
321 # i386-aout) bfd_gas=preferred ;;
322 mips-*) bfd_gas=yes ;;
323 ns32k-*) bfd_gas=yes ;;
324 ppc-*) bfd_gas=yes ;;
325 sparc-*) bfd_gas=yes ;;
326 *-elf) bfd_gas=yes ;;
327 *-ecoff) bfd_gas=yes ;;
328 *-som) bfd_gas=yes ;;
329 *) ;;
330 esac
331
332 # Other random stuff.
333
334 # do we need the opcodes library?
335 case ${cpu_type} in
336 vax | i386)
337 ;;
338 *)
339 need_opcodes=yes
340 if test "${shared_opcodes}" = "true"; then
341 # A shared libopcodes must be linked against libbfd.
342 need_bfd=yes
343 fi
344 ;;
345 esac
346
347 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
348
349 case ${cpu}-${vendor}-${os} in
350 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
351 esac
352
353 case ${cpu_type} in
354 m68k)
355 case ${extra_objects} in
356 *m68k-parse.o*) ;;
357 *) extra_objects="$extra_objects m68k-parse.o" ;;
358 esac
359 ;;
360 esac
361
362 # See if we really can support this configuration with the emulation code.
363
364 if test $this_target = $target ; then
365 primary_bfd_gas=$bfd_gas
366 obj_format=$fmt
367 gas_target=$targ
368 te_file=$em
369
370 if test $bfd_gas = no ; then
371 # Can't support other configurations this way.
372 break
373 fi
374 elif test $bfd_gas = no ; then
375 # Can't support this configuration.
376 break
377 fi
378
379 # From target name and format, produce a list of supported emulations.
380
381 case ${generic_target}-${fmt} in
382 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
383 mips-*-*-ecoff) case "$endian" in
384 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
385 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
386 esac ;;
387 mips-*-*-elf) case "$endian" in
388 big) emulation="mipsbelf mipslelf mipself" ;;
389 *) emulation="mipslelf mipsbelf mipself" ;;
390 esac ;;
391 esac
392
393 emulations="$emulations $emulation"
394
395 done
396
397 # Assign floating point type. Most processors with FP support
398 # IEEE FP. On those that don't support FP at all, usually IEEE
399 # is emulated.
400 case ${target_cpu} in
401 vax | tahoe ) atof=${target_cpu} ;;
402 *) atof=ieee ;;
403 esac
404
405 case "${obj_format}" in
406 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
407 esac
408
409 dnl
410 dnl Make sure the desired support files exist.
411 dnl
412
413 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
414 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
415 fi
416
417 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
418 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
419 fi
420
421 # and target makefile frag
422
423 target_frag=${srcdir}/config/${gas_target}.mt
424 if test ! -r ${target_frag}; then
425 target_frag=/dev/null # ick! but subst_file can't be conditionalized
426 fi
427 AC_SUBST_FILE(target_frag)
428
429 case ${user_bfd_gas}-${primary_bfd_gas} in
430 yes-yes | no-no)
431 # We didn't override user's choice.
432 ;;
433 no-yes)
434 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
435 ;;
436 no-preferred)
437 primary_bfd_gas=no
438 ;;
439 *-preferred)
440 primary_bfd_gas=yes
441 ;;
442 yes-*)
443 primary_bfd_gas=yes
444 ;;
445 -*)
446 # User specified nothing.
447 ;;
448 esac
449
450 # Some COFF configurations want these random other flags set.
451 case ${obj_format} in
452 coff)
453 case ${target_cpu_type} in
454 i386) AC_DEFINE(I386COFF) ;;
455 m68k) AC_DEFINE(M68KCOFF) ;;
456 m88k) AC_DEFINE(M88KCOFF) ;;
457 esac
458 ;;
459 esac
460
461 # Getting this done right is going to be a bitch. Each configuration specified
462 # with --enable-targets=... should be checked for environment, format, cpu, and
463 # bfd_gas setting.
464 #
465 # For each configuration, the necessary object file support code must be linked
466 # in. This might be only one, it might be up to four. The necessary emulation
467 # code needs to be provided, too.
468 #
469 # And then there's "--enable-targets=all"....
470 #
471 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
472
473 formats="${obj_format}"
474 emfiles=""
475 EMULATIONS=""
476 GAS_UNIQ(emulations)
477 for em in . $emulations ; do
478 case $em in
479 .) continue ;;
480 mipsbelf | mipslelf)
481 fmt=elf file=mipself ;;
482 mipsbecoff | mipslecoff)
483 fmt=ecoff file=mipsecoff ;;
484 esac
485 formats="$formats $fmt"
486 emfiles="$emfiles e-$file.o"
487 EMULATIONS="$EMULATIONS &$em,"
488 done
489 GAS_UNIQ(formats)
490 GAS_UNIQ(emfiles)
491 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
492 for fmt in $formats ; do
493 case $fmt in
494 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
495 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
496 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
497 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
498 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
499 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
500 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
501 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
502 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
503 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
504 esac
505 extra_objects="$extra_objects obj-$fmt.o"
506 done
507 obj_format=multi
508 fi
509 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
510 te_file=multi
511 extra_objects="$extra_objects $emfiles"
512 DEFAULT_EMULATION=`set . $emulations ; echo $2`
513 AC_DEFINE(USE_EMULATIONS)
514 fi
515 AC_SUBST(extra_objects)
516 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
517 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
518
519 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
520 config/obj-${obj_format}.h config/obj-${obj_format}.c \
521 config/te-${te_file}.h config/atof-${atof}.c \
522 $extra_files"
523 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
524 $extra_links"
525
526 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
527 yes-*-coff) need_bfd=yes ;;
528 no-*-coff) need_bfd=yes
529 AC_DEFINE(MANY_SEGMENTS) ;;
530 esac
531
532 reject_dev_configs=yes
533
534 case ${reject_dev_configs}-${dev} in
535 yes-yes) # Oops.
536 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
537 ;;
538 esac
539
540 AC_SUBST(target_cpu_type)
541 AC_SUBST(obj_format)
542 AC_SUBST(atof)
543 dnl AC_SUBST(emulation)
544
545 AC_LINK_FILES($files, $links)
546
547 case "${primary_bfd_gas}" in
548 yes) AC_DEFINE(BFD_ASSEMBLER)
549 need_bfd=yes ;;
550 esac
551
552 # do we need the opcodes library?
553 case "${need_opcodes}" in
554 yes)
555 OPCODES_DEP=../opcodes/libopcodes.a
556 OPCODES_LIB='-L../opcodes -lopcodes'
557
558 # We need to handle some special cases for shared libraries.
559 case "${host}" in
560 *-*-sunos*)
561 # On SunOS, we must link against the name we are going to install,
562 # not -lbfd, since SunOS does not support SONAME.
563 if test "${shared_opcodes}" = "true"; then
564 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
565 fi
566 ;;
567 alpha*-*-osf*)
568 # On Alpha OSF/1, the native linker searches all the -L
569 # directories for any LIB.so files, and only then searches for any
570 # LIB.a files. That means that if there is an installed
571 # libbfd.so, but this build is not done with --enable-shared, the
572 # link will wind up being against the install libbfd.so rather
573 # than the newly built libbfd. To avoid this, we must explicitly
574 # link against libbfd.a when --enable-shared is not used.
575 if test "${shared_opcodes}" != "true"; then
576 OPCODES_LIB='../opcodes/libopcodes.a'
577 fi
578 ;;
579 esac
580 ;;
581 esac
582 AC_SUBST(OPCODES_DEP)
583 AC_SUBST(OPCODES_LIB)
584
585 case "${need_bfd}" in
586 yes)
587 BFDDEP=../bfd/libbfd.a
588 BFDLIB='-L../bfd -lbfd'
589 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
590
591 # We need to handle some special cases for shared libraries
592 case "${host}" in
593 *-*-sunos*)
594 # On SunOS, we must link against the name we are going to install,
595 # not -lbfd, since SunOS does not support SONAME.
596 if test "${shared_bfd}" = "true"; then
597 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
598 fi
599 ;;
600 alpha*-*-osf*)
601 # On Alpha OSF/1, the native linker searches all the -L
602 # directories for any LIB.so files, and only then searches for any
603 # LIB.a files. That means that if there is an installed
604 # libbfd.so, but this build is not done with --enable-shared, the
605 # link will wind up being against the install libbfd.so rather
606 # than the newly built libbfd. To avoid this, we must explicitly
607 # link against libbfd.a when --enable-shared is not used.
608 if test "${shared_bfd}" != "true"; then
609 BFDLIB='../bfd/libbfd.a'
610 fi
611 ;;
612 esac
613 ;;
614 esac
615 AC_SUBST(BFDDEP)
616 AC_SUBST(BFDLIB)
617 AC_SUBST(ALL_OBJ_DEPS)
618
619 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
620 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
621 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
622 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
623 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
624
625 AC_PROG_CC
626 AC_PROG_INSTALL
627
628 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
629
630 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
631 # people who are not cross-compiling but are compiling cross-assemblers.
632 AC_MSG_CHECKING(whether compiling a cross-assembler)
633 if test "${host}" = "${target}"; then
634 cross_gas=no
635 else
636 cross_gas=yes
637 AC_DEFINE(CROSS_COMPILE)
638 fi
639 AC_MSG_RESULT($cross_gas)
640
641 dnl ansidecl.h will deal with const
642 dnl AC_CONST
643 AC_FUNC_ALLOCA
644 AC_C_INLINE
645
646 # VMS doesn't have unlink.
647 AC_CHECK_FUNCS(unlink remove, break)
648
649 # Some systems don't have sbrk().
650 AC_CHECK_FUNCS(sbrk)
651
652 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
653 # enough, but on some of those systems, the assert macro relies on requoting
654 # working properly!
655 GAS_WORKING_ASSERT
656
657 # On some systems, the system header files may not declare malloc, realloc,
658 # and free. There are places where gas needs these functions to have been
659 # declared -- such as when taking their addresses.
660 gas_test_headers="
661 #ifdef HAVE_MEMORY_H
662 #include <memory.h>
663 #endif
664 #ifdef HAVE_STRING_H
665 #include <string.h>
666 #else
667 #ifdef HAVE_STRINGS_H
668 #include <strings.h>
669 #endif
670 #endif
671 #ifdef HAVE_STDLIB_H
672 #include <stdlib.h>
673 #endif
674 #ifdef HAVE_UNISTD_H
675 #include <unistd.h>
676 #endif
677 "
678 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
679 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
680 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
681 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
682
683 # Does errno.h declare errno, or do we have to add a separate declaration
684 # for it?
685 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
686 #ifdef HAVE_ERRNO_H
687 #include <errno.h>
688 #endif
689 ])
690
691 HLDFLAGS=
692 HLDENV=
693 RPATH_ENVVAR=LD_LIBRARY_PATH
694 # If we have shared libraries, try to set rpath reasonably.
695 if test "${shared}" = "true"; then
696 case "${host}" in
697 *-*-hpux*)
698 HLDFLAGS='-Wl,+s,+b,$(libdir)'
699 RPATH_ENVVAR=SHLIB_PATH
700 ;;
701 *-*-irix5* | *-*-irix6*)
702 HLDFLAGS='-Wl,-rpath,$(libdir)'
703 ;;
704 *-*-linux*aout*)
705 ;;
706 *-*-linux*)
707 HLDFLAGS='-Wl,-rpath,$(libdir)'
708 ;;
709 *-*-solaris*)
710 HLDFLAGS='-R $(libdir)'
711 ;;
712 *-*-sysv4*)
713 HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
714 ;;
715 esac
716 fi
717
718 # On SunOS, if the linker supports the -rpath option, use it to
719 # prevent ../bfd and ../opcodes from being included in the run time
720 # search path.
721 case "${host}" in
722 *-*-sunos*)
723 echo 'main () { }' > conftest.c
724 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
725 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
726 :
727 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
728 :
729 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
730 :
731 elif test "${shared}" = "true"; then
732 HLDFLAGS='-Wl,-rpath=$(libdir)'
733 else
734 HLDFLAGS='-Wl,-rpath='
735 fi
736 rm -f conftest.t conftest.c conftest
737 ;;
738 esac
739 AC_SUBST(HLDFLAGS)
740 AC_SUBST(HLDENV)
741 AC_SUBST(RPATH_ENVVAR)
742
743 dnl This must come last.
744 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)