]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - gas/configure.in
* config/tc-v850.c: New file.
[thirdparty/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
67
68 # check for architecture variants
69 case ${cpu} in
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
73 changequote(,)dnl
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
78 changequote([,])dnl
79 m8*) cpu_type=m88k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
87 *) cpu_type=${cpu} ;;
88 esac
89
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
93 continue
94 fi
95
96 targ=${cpu_type}
97 generic_target=${cpu_type}-$vendor-$os
98 dev=no
99 bfd_gas=no
100 em=generic
101
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
109
110 alpha-*-*vms*) fmt=evax ;;
111 alpha-*-netware*) fmt=ecoff ;;
112 alpha-*-osf*) fmt=ecoff ;;
113 alpha-*-linuxecoff*) fmt=ecoff ;;
114 alpha-*-linux*) fmt=elf em=linux ;;
115
116 # start-sanitize-arc
117 arc-*-elf*) fmt=elf bfd_gas=yes ;;
118 # end-sanitize-arc
119
120 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
121 arm-*-aout) fmt=aout
122 case "$endian" in
123 big) targ=arm-big ;;
124 *) targ=arm-lit ;;
125 esac
126 ;;
127 arm-*-coff) fmt=coff ;;
128 arm-*-riscix*) fmt=aout ;;
129 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
130
131 # start-sanitize-d10v
132 d10v-*-*) fmt=elf bfd_gas=yes ;;
133 # end-sanitize-d10v
134
135 hppa-*-*elf*) fmt=elf em=hppa ;;
136 hppa-*-lites*) fmt=elf em=hppa ;;
137 hppa-*-osf*) fmt=som em=hppa ;;
138 hppa-*-hpux*) fmt=som em=hppa ;;
139 hppa-*-bsd*) fmt=som em=hppa ;;
140 hppa-*-hiux*) fmt=som em=hppa ;;
141
142 h8300-*-coff) fmt=coff ;;
143
144 i386-ibm-aix*) fmt=coff targ=i386coff
145 em=i386aix ;;
146 i386-*-bsd*) fmt=aout em=386bsd ;;
147 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
148 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
149 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
150 i386-*-linux*coff*) fmt=coff em=linux
151 targ=i386coff ;;
152 i386-*-linux*) fmt=elf em=linux ;;
153 i386-*-lynxos*) fmt=coff targ=i386coff
154 em=lynx ;;
155 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
156 fmt=elf ;;
157 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
158 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
159 fmt=coff targ=i386coff ;;
160 i386-*-vsta) fmt=aout ;;
161 i386-*-go32) fmt=coff targ=i386coff ;;
162 i386-*-rtems*) fmt=coff targ=i386coff ;;
163 i386-*-gnu*) fmt=elf ;;
164 i386-*-mach*)
165 fmt=aout em=mach bfd_gas=yes ;;
166 i386-*-msdos*) fmt=aout ;;
167 i386-*-moss*) fmt=elf ;;
168 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
169 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
170 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
171 i960-*-bout) fmt=bout ;;
172 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
173 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
174 i960-*-nindy*) fmt=bout ;;
175 i960-*-vxworks4*) fmt=bout ;;
176 i960-*-vxworks5.0) fmt=bout ;;
177 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
178 i960-*-vxworks*) fmt=bout ;;
179
180 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
181 fmt=aout em=sun3 ;;
182 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
183 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
184 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
185 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
186 fmt=elf ;;
187 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
188 fmt=coff targ=m68kcoff ;;
189 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
190 m68k-*-linux*aout*) fmt=aout em=linux ;;
191 m68k-*-linux*) fmt=elf em=linux ;;
192 m68k-*-lynxos*) fmt=coff targ=m68kcoff
193 em=lynx ;;
194 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
195 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
196 m68k-*-psos*) fmt=elf em=psos;;
197
198 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
199 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
200
201 # don't change em like *-*-bsd does
202 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
203 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
204 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
205 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
206 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
207 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
208 mips-*-ecoff*) fmt=ecoff
209 case "$endian" in
210 big) targ=mips-big ;;
211 *) targ=mips-lit ;;
212 esac
213 ;;
214 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
215 mips-*-gnu*) fmt=aout
216 case "$endian" in
217 big) targ=mips-big ;;
218 *) targ=mips-lit ;;
219 esac
220 ;;
221 mips-*-irix6*) fmt=elf targ=mips-big ;;
222 mips-*-irix5*) fmt=elf targ=mips-big ;;
223 mips-*-irix*) fmt=ecoff targ=mips-big ;;
224 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
225 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
226 mips-*-elf*) fmt=elf
227 case "$endian" in
228 big) targ=mips-big ;;
229 *) targ=mips-lit ;;
230 esac
231 ;;
232 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
233 fmt=coff em=pe
234 case "$endian" in
235 big) targ=ppc-big ;;
236 *) targ=ppc-lit ;;
237 esac
238 ;;
239 ppc-*-aix*) fmt=coff ;;
240 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
241 fmt=elf
242 case "$endian" in
243 big) targ=ppc-big ;;
244 *) targ=ppc-lit ;;
245 esac
246 ;;
247 ppc-*-linux*) fmt=elf
248 case "$endian" in
249 big) targ=ppc-big ;;
250 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
251 esac
252 ;;
253 ppc-*-solaris*) fmt=elf
254 case "$endian" in
255 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
256 *) targ=ppc-sol ;;
257 esac
258 ;;
259 ppc-*-rtems*)
260 fmt=elf
261 case "$endian" in
262 big) targ=ppc-big ;;
263 *) targ=ppc-lit ;;
264 esac
265 ;;
266 ppc-*-macos* | ppc-*-mpw*)
267 fmt=coff em=macos ;;
268 ppc-*-netware*) fmt=elf em=ppcnw ;;
269
270 sh-*-coff) fmt=coff ;;
271
272 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
273 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
274
275 sparc-*-rtems*) fmt=aout ;;
276 sparc-*-sunos4*) fmt=aout em=sun3 ;;
277 sparc-*-aout | sparc*-*-vxworks*)
278 fmt=aout ;;
279 sparc-*-coff) fmt=coff ;;
280 sparc-*-lynxos*) fmt=coff em=lynx ;;
281 sparc-fujitsu-none) fmt=aout ;;
282 sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
283 fmt=elf ;;
284 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
285
286 v850-*-*) fmt=elf bfd_gas=yes ;;
287
288 vax-*-bsd* | vax-*-ultrix*)
289 fmt=aout ;;
290 vax-*-vms) fmt=vms ;;
291
292 z8k-*-coff | z8k-*-sim)
293 fmt=coff ;;
294
295 w65-*-*) fmt=coff ;;
296
297 *-*-aout | *-*-scout)
298 fmt=aout ;;
299 *-*-nindy*)
300 fmt=bout ;;
301 *-*-bsd*)
302 fmt=aout em=sun3 ;;
303 *-*-generic) fmt=generic ;;
304 *-*-xray | *-*-hms) fmt=coff ;;
305 *-*-sim) fmt=coff ;;
306 *-*-elf | *-*-sysv4* | *-*-solaris*)
307 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
308 fmt=elf dev=yes ;;
309 *-*-vxworks) fmt=aout ;;
310 *-*-netware) fmt=elf ;;
311 esac
312
313 case ${cpu_type}-${fmt} in
314 alpha-*) bfd_gas=yes ;;
315 arm-*) bfd_gas=yes ;;
316 # not yet
317 # i386-aout) bfd_gas=preferred ;;
318 mips-*) bfd_gas=yes ;;
319 ns32k-*) bfd_gas=yes ;;
320 ppc-*) bfd_gas=yes ;;
321 sparc-*) bfd_gas=yes ;;
322 *-elf) bfd_gas=yes ;;
323 *-ecoff) bfd_gas=yes ;;
324 *-som) bfd_gas=yes ;;
325 *) ;;
326 esac
327
328 # Other random stuff.
329
330 # do we need the opcodes library?
331 case ${cpu_type} in
332 vax | i386)
333 ;;
334 *)
335 need_opcodes=yes
336 if test "${shared_opcodes}" = "true"; then
337 # A shared libopcodes must be linked against libbfd.
338 need_bfd=yes
339 fi
340 ;;
341 esac
342
343 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
344
345 case ${cpu}-${vendor}-${os} in
346 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
347 esac
348
349 case ${cpu_type} in
350 m68k)
351 case ${extra_objects} in
352 *m68k-parse.o*) ;;
353 *) extra_objects="$extra_objects m68k-parse.o" ;;
354 esac
355 ;;
356 esac
357
358 # See if we really can support this configuration with the emulation code.
359
360 if test $this_target = $target ; then
361 primary_bfd_gas=$bfd_gas
362 obj_format=$fmt
363 gas_target=$targ
364 te_file=$em
365
366 if test $bfd_gas = no ; then
367 # Can't support other configurations this way.
368 break
369 fi
370 elif test $bfd_gas = no ; then
371 # Can't support this configuration.
372 break
373 fi
374
375 # From target name and format, produce a list of supported emulations.
376
377 case ${generic_target}-${fmt} in
378 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
379 mips-*-*-ecoff) case "$endian" in
380 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
381 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
382 esac ;;
383 mips-*-*-elf) case "$endian" in
384 big) emulation="mipsbelf mipslelf mipself" ;;
385 *) emulation="mipslelf mipsbelf mipself" ;;
386 esac ;;
387 esac
388
389 emulations="$emulations $emulation"
390
391 done
392
393 # Assign floating point type. Most processors with FP support
394 # IEEE FP. On those that don't support FP at all, usually IEEE
395 # is emulated.
396 case ${target_cpu} in
397 vax | tahoe ) atof=${target_cpu} ;;
398 *) atof=ieee ;;
399 esac
400
401 case "${obj_format}" in
402 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
403 esac
404
405 dnl
406 dnl Make sure the desired support files exist.
407 dnl
408
409 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
410 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
411 fi
412
413 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
414 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
415 fi
416
417 # and target makefile frag
418
419 target_frag=${srcdir}/config/${gas_target}.mt
420 if test ! -r ${target_frag}; then
421 target_frag=/dev/null # ick! but subst_file can't be conditionalized
422 fi
423 AC_SUBST_FILE(target_frag)
424
425 case ${user_bfd_gas}-${primary_bfd_gas} in
426 yes-yes | no-no)
427 # We didn't override user's choice.
428 ;;
429 no-yes)
430 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
431 ;;
432 no-preferred)
433 primary_bfd_gas=no
434 ;;
435 *-preferred)
436 primary_bfd_gas=yes
437 ;;
438 yes-*)
439 primary_bfd_gas=yes
440 ;;
441 -*)
442 # User specified nothing.
443 ;;
444 esac
445
446 # Some COFF configurations want these random other flags set.
447 case ${obj_format} in
448 coff)
449 case ${target_cpu_type} in
450 i386) AC_DEFINE(I386COFF) ;;
451 m68k) AC_DEFINE(M68KCOFF) ;;
452 m88k) AC_DEFINE(M88KCOFF) ;;
453 esac
454 ;;
455 esac
456
457 # Getting this done right is going to be a bitch. Each configuration specified
458 # with --enable-targets=... should be checked for environment, format, cpu, and
459 # bfd_gas setting.
460 #
461 # For each configuration, the necessary object file support code must be linked
462 # in. This might be only one, it might be up to four. The necessary emulation
463 # code needs to be provided, too.
464 #
465 # And then there's "--enable-targets=all"....
466 #
467 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
468
469 formats="${obj_format}"
470 emfiles=""
471 EMULATIONS=""
472 GAS_UNIQ(emulations)
473 for em in . $emulations ; do
474 case $em in
475 .) continue ;;
476 mipsbelf | mipslelf)
477 fmt=elf file=mipself ;;
478 mipsbecoff | mipslecoff)
479 fmt=ecoff file=mipsecoff ;;
480 esac
481 formats="$formats $fmt"
482 emfiles="$emfiles e-$file.o"
483 EMULATIONS="$EMULATIONS &$em,"
484 done
485 GAS_UNIQ(formats)
486 GAS_UNIQ(emfiles)
487 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
488 for fmt in $formats ; do
489 case $fmt in
490 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
491 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
492 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
493 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
494 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
495 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
496 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
497 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
498 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
499 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
500 esac
501 extra_objects="$extra_objects obj-$fmt.o"
502 done
503 obj_format=multi
504 fi
505 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
506 te_file=multi
507 extra_objects="$extra_objects $emfiles"
508 DEFAULT_EMULATION=`set . $emulations ; echo $2`
509 AC_DEFINE(USE_EMULATIONS)
510 fi
511 AC_SUBST(extra_objects)
512 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
513 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
514
515 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
516 config/obj-${obj_format}.h config/obj-${obj_format}.c \
517 config/te-${te_file}.h config/atof-${atof}.c \
518 $extra_files"
519 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
520 $extra_links"
521
522 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
523 yes-*-coff) need_bfd=yes ;;
524 no-*-coff) need_bfd=yes
525 AC_DEFINE(MANY_SEGMENTS) ;;
526 esac
527
528 reject_dev_configs=yes
529
530 case ${reject_dev_configs}-${dev} in
531 yes-yes) # Oops.
532 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
533 ;;
534 esac
535
536 AC_SUBST(target_cpu_type)
537 AC_SUBST(obj_format)
538 AC_SUBST(atof)
539 dnl AC_SUBST(emulation)
540
541 AC_LINK_FILES($files, $links)
542
543 case "${primary_bfd_gas}" in
544 yes) AC_DEFINE(BFD_ASSEMBLER)
545 need_bfd=yes ;;
546 esac
547
548 # do we need the opcodes library?
549 case "${need_opcodes}" in
550 yes)
551 OPCODES_DEP=../opcodes/libopcodes.a
552 OPCODES_LIB='-L../opcodes -lopcodes'
553
554 # We need to handle some special cases for shared libraries.
555 case "${host}" in
556 *-*-sunos*)
557 # On SunOS, we must link against the name we are going to install,
558 # not -lbfd, since SunOS does not support SONAME.
559 if test "${shared_opcodes}" = "true"; then
560 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
561 fi
562 ;;
563 alpha*-*-osf*)
564 # On Alpha OSF/1, the native linker searches all the -L
565 # directories for any LIB.so files, and only then searches for any
566 # LIB.a files. That means that if there is an installed
567 # libbfd.so, but this build is not done with --enable-shared, the
568 # link will wind up being against the install libbfd.so rather
569 # than the newly built libbfd. To avoid this, we must explicitly
570 # link against libbfd.a when --enable-shared is not used.
571 if test "${shared_opcodes}" != "true"; then
572 OPCODES_LIB='../opcodes/libopcodes.a'
573 fi
574 ;;
575 esac
576 ;;
577 esac
578 AC_SUBST(OPCODES_DEP)
579 AC_SUBST(OPCODES_LIB)
580
581 case "${need_bfd}" in
582 yes)
583 BFDDEP=../bfd/libbfd.a
584 BFDLIB='-L../bfd -lbfd'
585 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
586
587 # We need to handle some special cases for shared libraries
588 case "${host}" in
589 *-*-sunos*)
590 # On SunOS, we must link against the name we are going to install,
591 # not -lbfd, since SunOS does not support SONAME.
592 if test "${shared_bfd}" = "true"; then
593 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
594 fi
595 ;;
596 alpha*-*-osf*)
597 # On Alpha OSF/1, the native linker searches all the -L
598 # directories for any LIB.so files, and only then searches for any
599 # LIB.a files. That means that if there is an installed
600 # libbfd.so, but this build is not done with --enable-shared, the
601 # link will wind up being against the install libbfd.so rather
602 # than the newly built libbfd. To avoid this, we must explicitly
603 # link against libbfd.a when --enable-shared is not used.
604 if test "${shared_bfd}" != "true"; then
605 BFDLIB='../bfd/libbfd.a'
606 fi
607 ;;
608 esac
609 ;;
610 esac
611 AC_SUBST(BFDDEP)
612 AC_SUBST(BFDLIB)
613 AC_SUBST(ALL_OBJ_DEPS)
614
615 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
616 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
617 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
618 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
619 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
620
621 AC_PROG_CC
622 AC_PROG_INSTALL
623
624 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
625
626 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
627 # people who are not cross-compiling but are compiling cross-assemblers.
628 AC_MSG_CHECKING(whether compiling a cross-assembler)
629 if test "${host}" = "${target}"; then
630 cross_gas=no
631 else
632 cross_gas=yes
633 AC_DEFINE(CROSS_COMPILE)
634 fi
635 AC_MSG_RESULT($cross_gas)
636
637 dnl ansidecl.h will deal with const
638 dnl AC_CONST
639 AC_FUNC_ALLOCA
640 AC_C_INLINE
641
642 # VMS doesn't have unlink.
643 AC_CHECK_FUNCS(unlink remove, break)
644
645 # Some systems don't have sbrk().
646 AC_CHECK_FUNCS(sbrk)
647
648 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
649 # enough, but on some of those systems, the assert macro relies on requoting
650 # working properly!
651 GAS_WORKING_ASSERT
652
653 # On some systems, the system header files may not declare malloc, realloc,
654 # and free. There are places where gas needs these functions to have been
655 # declared -- such as when taking their addresses.
656 gas_test_headers="
657 #ifdef HAVE_MEMORY_H
658 #include <memory.h>
659 #endif
660 #ifdef HAVE_STRING_H
661 #include <string.h>
662 #else
663 #ifdef HAVE_STRINGS_H
664 #include <strings.h>
665 #endif
666 #endif
667 #ifdef HAVE_STDLIB_H
668 #include <stdlib.h>
669 #endif
670 #ifdef HAVE_UNISTD_H
671 #include <unistd.h>
672 #endif
673 "
674 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
675 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
676 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
677 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
678
679 # Does errno.h declare errno, or do we have to add a separate declaration
680 # for it?
681 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
682 #ifdef HAVE_ERRNO_H
683 #include <errno.h>
684 #endif
685 ])
686
687 HLDFLAGS=
688 RPATH_ENVVAR=LD_LIBRARY_PATH
689 # If we have shared libraries, try to set rpath reasonably.
690 if test "${shared}" = "true"; then
691 case "${host}" in
692 *-*-hpux*)
693 HLDFLAGS='-Wl,+s,+b,$(libdir)'
694 RPATH_ENVVAR=SHLIB_PATH
695 ;;
696 *-*-irix5* | *-*-irix6*)
697 HLDFLAGS='-Wl,-rpath,$(libdir)'
698 ;;
699 *-*-linux*aout*)
700 ;;
701 *-*-linux*)
702 HLDFLAGS='-Wl,-rpath,$(libdir)'
703 ;;
704 *-*-sysv4* | *-*-solaris*)
705 HLDFLAGS='-R $(libdir)'
706 ;;
707 esac
708 fi
709
710 # On SunOS, if the linker supports the -rpath option, use it to
711 # prevent ../bfd and ../opcodes from being included in the run time
712 # search path.
713 case "${host}" in
714 *-*-sunos*)
715 echo 'main () { }' > conftest.c
716 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
717 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
718 :
719 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
720 :
721 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
722 :
723 elif test "${shared}" = "true"; then
724 HLDFLAGS='-Wl,-rpath=$(libdir)'
725 else
726 HLDFLAGS='-Wl,-rpath='
727 fi
728 rm -f conftest.t conftest.c conftest
729 ;;
730 esac
731 AC_SUBST(HLDFLAGS)
732 AC_SUBST(RPATH_ENVVAR)
733
734 dnl This must come last.
735 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)