1 2009-05-12 Pedro Alves <pedro@codesourcery.com>
3 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
4 * command.h (deprecated_add_set_cmd): Delete declaration.
5 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
6 'set debug gnu-nat' and 'show debug gnu-nat'.
7 * i386-nat.c (_initialize_i386_nat): Replace 'maint
8 show-debug-registers' with 'maint set show-debug-registers' and
9 'maint show show-debug-registers'.
10 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
11 show-debug-registers' with 'maint set show-debug-registers' and
12 'maint show show-debug-registers'.
14 2009-05-12 Joel Brobecker <brobecker@adacore.com>
16 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
17 pushing it on the output obstack.
19 2009-05-11 Joel Brobecker <brobecker@adacore.com>
21 Fix internal error on breaking at a multi-locations caller source line.
22 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
23 command with no parameters.
25 2009-05-11 Pedro Alves <pedro@codesourcery.com>
27 * linux-nat.c (enum sigchld_state): Delete.
28 (linux_nat_async_events_state): Delete.
29 (struct waitpid_result): Delete.
30 (waitpid_queue): Delete.
31 (queued_waitpid_1): Delete.
32 (async_file_flush): New.
33 (queued_waitpid, push_waitpid): Delete.
34 (async_file_mark): New.
35 (drain_queued_events): Delete.
36 (my_waitpid): Remove locally queued events handling.
37 (linux_test_for_tracefork): Upjust.
38 (linux_child_follow_fork): Ditto.
39 (sync_sigchld_action): Delete.
40 (blocked_mask): Reinstate.
41 (async_sigchld_action): Rename to...
42 (sigchld_action): ... this.
43 (block_child_signals): New.
44 (restore_child_signals_mask): New.
45 (lin_lwp_attach_lwp): Adjust.
46 (linux_nat_create_inferior): Ditto.
47 (linux_nat_attach): Also use lp->status in async mode.
48 (get_pending_status): Don't use queued_waitpid.
49 (linux_nat_detach): Don't drain locally queued events.
50 (linux_nat_resume): Allow pending wait statuses stored lp->status
51 in async mode. If returning early due to a pending event,
52 re-register the event source.
53 (stop_wait_callback): Allow pending wait statuses stored
54 lp->status in async mode.
55 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
56 (linux_nat_wait): Rename to ...
57 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
58 lp->status in async mode. Always add WNOHANG to the waitpid
59 options in async mode.
60 (linux_nat_wait): New.
61 (kill_callback): Don't drain locally queued events.
62 (sigchld_handler): Rewrite.
63 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
64 refer to "set target-async".
65 (linux_nat_async_mask): If in non-stop, and re-enabling async
66 mode, re-register the target event source in the event loop.
67 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
68 (get_pending_events, async_sigchld_handler)
69 (linux_nat_async_events): Delete.
70 (handle_target_event): New.
71 (linux_nat_async_file_handler): Delete.
72 (linux_async_pipe): New.
73 (linux_nat_async): Only re-register in the event loop if not
74 registered yet. Always notify the event-loop once if enabling the
76 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
77 lp->status, not in the locally queued event list.
78 (linux_nat_stop): Don't mask out async event handling.
79 (linux_nat_setup_async): Delete.
80 (_initialize_linux_nat): Adjust.
81 (lin_thread_get_thread_signals): blocked_mask is global again.
84 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
88 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
89 (target_stoppped_by_watchpoint): New macro.
90 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
91 (target_have_steppable_watchpoint): New macro.
92 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
93 (target_have_continuable_watchpoint): New macro.
94 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
95 (target_can_use_hardware_watchpoint): New macro.
96 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
97 (target_region_ok_for_hw_watchpoint): New macro.
99 * breakpoint.c (update_watchpoint): Use new macros.
100 (bpstat_alloc): Likewise.
101 (create_breakpoint): Likewise.
102 (watch_command_1): Likewise.
103 (can_use_hardware_watchpoint): Likewise.
104 (do_enable_breakpoint): Likewise.
105 * infrun.c (handle_inferior_event): Adapt to new macros.
106 * mips-tdep.c (mips_gdbarch_init): Update comments.
107 * procfs.c (procfs_set_watchpoint): Update comment.
108 (procfs_insert_watchpoint): Adapt to new macros.
109 * remote-m32r-sdi.c (m32r_stop):
110 * remote-mips.c (mips_remove_breakpoint):
111 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
112 (debug_to_stopped_by_watchpoint): Likewise.
115 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
117 * src/gdb/target.h: Remove all tests for already defined
118 macros. All macros defined here should not be set in config
121 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
123 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
124 (have_ptrace_getsetfpregs): Likewise.
125 fetch_all_gp_regs): New function.
126 (fetch_gp_regs): New function.
127 (fetch_all_fp_regs): Likewise.
128 (fetch_fp_regs): New function.
129 (fetch_ppc_registers): Using the new methods to fetch general-
130 purpose and floating-pointer registers.
131 (store_all_gp_regs): New function.
132 (store_gp_regs): Likewise.
133 (store_all_fp_regs): New function.
134 (store_fp_regs): Likewise.
135 (store_ppc_registers): Using the new methods to store general-
136 purpose and floating-pointer registers.
138 2009-05-08 Doug Evans <dje@google.com>
140 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
142 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
144 * MAINTAINERS (Write After Approval): Add self.
146 2009-05-07 Joel Brobecker <brobecker@adacore.com>
148 * gdbarch.h (target_gdbarch): Add comment documenting this global.
150 2009-05-06 Joel Brobecker <brobecker@adacore.com>
152 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
154 * configure: Regenerate.
156 2009-05-06 Joel Brobecker <brobecker@adacore.com>
158 * utils.c: Add include of gdb_usleep.h.
159 (defaulted_query): Detect false EOF conditions that happen
160 on terminals opened with the O_NONBLOCK flag when there is
163 2009-05-06 Pedro Alves <pedro@codesourcery.com>
165 * inferior.c (add_inferior): Move observer_notify_new_inferior
167 (add_inferior_silent): ... here.
169 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
170 Pedro Alves <pedro@codesourcery.com>
172 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
173 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
175 (procfs_stopped_by_watchpoint): Made static, ptid argument
177 (_initialize_procfs): Register new watchpoint related target
179 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
180 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
181 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
182 (target_insert_watchpoint, target_remove_watchpoint): Delete.
183 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
185 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
186 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
187 (target_insert_watchpoint, target_remove_watchpoint): Delete.
188 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
190 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
191 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
192 (target_insert_watchpoint, target_remove_watchpoint): Delete.
193 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
196 2009-05-06 Hui Zhu <teawater@gmail.com>
198 * i386-tdep.c (i386_process_record): Change bzero to memset.
200 2009-05-06 Hui Zhu <teawater@gmail.com>
202 * NEWS: Add item for process record and replay.
204 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
206 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
208 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
210 * inferior.h (read_pc, write_pc): Remove.
211 * regcache.c (read_pc, write_pc): Remove.
213 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
215 (handle_inferior_event): Use regcache_read_pc instead of read_pc
216 when determining value of stop_pc. Replace subsequent uses of
217 read_pc by inspecting already-retrieved stop_pc value.
218 (keep_going): Use regcache_read_pc instead of read_pc.
220 * breakpoint.c (watchpoint_check): Use current frame architecture
221 and PC instead of current_gdbarch and read_pc ().
222 * tracepoint.c (set_traceframe_context): Replace PC argument
224 (trace_start_command, finish_tfind_command): Update calls.
225 (finish_tfind_command): Compare frame IDs to identify transitions
227 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
228 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
229 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
230 of read_pc and write_pc.
231 (store_register): Make regcache argument non-const. Update call
232 to exec_one_dummy_insn.
234 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
235 * infcmd.c (post_create_inferior): Likewise.
236 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
237 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
238 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
239 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
240 * linux-fork.c (fork_load_infrun_state): Likewise.
241 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
242 * record.c (record_wait): Likewise.
243 * procfs.c (procfs_wait): Likewise.
244 * remote-mips.c (common_open, mips_wait): Likewise.
245 * remote-m32r-sdi.c (m32r_resume): Likewise.
247 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
248 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
249 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
250 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
251 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
253 * solib-darwin.c: Include "regcache.h".
254 * solib-pa64.c: Include "regcache.h".
255 * solib-svr4.c: Include "regcache.h.".
257 * symfile.c: Do not mention read_pc or write_pc in comments.
258 * dink32-rom.c: Likewise.
259 * m32r-rom.c: Likewise.
260 * mips-tdep.c: Likewise.
262 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
264 * fork-child.c (startup_inferior): Move setting stop_pc ...
265 * infcmd.c (post_create_inferior): ... to here.
267 2009-05-04 Michael Snyder <msnyder@vmware.com>
269 * NEWS: Add item for reverse debugging commands.
271 2009-05-04 Pedro Alves <pedro@codesourcery.com>
273 * go32-nat.c (go32_stop): Delete.
274 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
275 (go32_create_inferior): Don't call go32_stop or
277 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
279 (init_go32_ops): Don't register go32_stop.
281 2009-05-02 Eli Zaretskii <eliz@gnu.org>
283 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
286 * infcall.c (find_function_addr): Avoid compiler warnings for
289 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
291 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
292 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
294 2009-05-01 Doug Evans <dje@google.com>
296 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
299 2009-05-01 Eli Zaretskii <eliz@gnu.org>
301 * record.c (_initialize_record): Reformat and clarify doc strings
302 for stop-at-limit and insn-number-max.
304 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
306 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
308 Make specifiable the make_function_type type memory ownership.
309 * gdbtypes.c (make_function_type): New parameter `objfile', use it
310 explicitely instead of TYPE-initialized removed local variable
311 `objfile'. Describe `objfile' it in the function comment.
312 (lookup_function_type): Update make_function_type callers.
313 * gdbtypes.h (make_function_type): Update the prototype.
314 * jv-lang.c (java_link_class_type): Update make_function_type callers.
315 * dwarf2read.c (read_subroutine_type): Likewise.
316 * stabsread.c (read_type): Likewise.
318 2009-05-01 Eli Zaretskii <eliz@gnu.org>
320 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
321 printing a bogus "Thread <main>".
322 (go32_thread_alive): Don't return 1 for null_ptid.
324 * i386-tdep.c (i386_go32_init_abi): Override the number of
325 registers due to non-support of SSE.
327 2009-04-30 Anthony Green <green@moxielogic.com>
329 * configure.tgt: Link the moxie simulator in with gdb.
331 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
333 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
336 2009-04-30 Hui Zhu <teawater@gmail.com>
337 Michael Snyder <msnyder@vmware.com>
339 I386 Linux process record and replay support.
341 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
342 This struct has the argument for the function
343 "record_linux_system_call".
344 (i386_linux_intx80_sysenter_record): New function. Parse the
345 system call instruction and call function
346 "record_linux_system_call" to record execute log.
347 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
348 Set "i386_linux_intx80_sysenter_record" to
349 "i386_intx80_record" and "i386_sysenter_record".
351 2009-04-30 Hui Zhu <teawater@gmail.com>
352 Michael Snyder <msnyder@vmware.com>
354 I386 architecture process record and replay support.
356 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
357 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
359 (aflag, dflag, override, modrm, mod, reg, rm, ot,
360 i386_record_pc): New variables. Ditto.
361 (i386_record_modrm, i386_record_lea_modrm_addr,
362 i386_record_lea_modrm): New functions. Ditto.
363 (i386_process_record): New function. Parse the instruction in
364 address "addr" and record the values of registers and memory
365 that will be changed by this instruction.
366 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
367 "process_record" interface.
368 * i386-tdep.h (gdbarch_tdep): New function pointers
369 "i386_intx80_record" and "i386_sysenter_record" that point to
370 the function that can record "intx80" and "sysenter" execute
373 2009-04-30 Hui Zhu <teawater@gmail.com>
374 Michael Snyder <msnyder@vmware.com>
376 * infrun.c (use_displaced_stepping): Return false if process
377 record and replay target is used.
378 (proceed): Call function "record_not_record_set" if pocess
379 record and replay target is used.
381 2009-04-30 Hui Zhu <teawater@gmail.com>
382 Michael Snyder <msnyder@vmware.com>
384 Linux process record and replay support.
386 * Makefile.in (ALLDEPFILES): Add linux-record.c.
387 (ALL_TARGET_OBS): Add linux-record.o.
388 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
389 (i[34567]86-*-linux*): Add linux-record.o.
390 * linux-record.c, linux-record.h: New file.
392 2009-04-30 Hui Zhu <teawater@gmail.com>
393 Michael Snyder <msnyder@vmware.com>
395 Process record and replay target.
397 * Makefile.in (SFILES): Add record.c.
398 (COMMON_OBS): Add record.o.
399 * record.c, record.h: New file.
401 2009-04-30 Hui Zhu <teawater@gmail.com>
402 Michael Snyder <msnyder@vmware.com>
404 * target.h (strata): New stratum "record_stratum".
406 2009-04-30 Hui Zhu <teawater@gmail.com>
407 Michael Snyder <msnyder@vmware.com>
409 GDBARCH interface for process record and replay.
411 * gdbarch.sh (process_record): This interface point to the
412 function that records the inferior execute log.
414 2009-04-29 Doug Evans <dje@google.com>
416 * i386-nat.c (child_post_startup_inferior): Delete, unused.
418 2009-04-29 Pedro Alves <pedro@codesourcery.com>
420 * breakpoint.c (print_exception_catchpoint): Access `b' directly
421 instead of `b->loc->owner'.
422 (print_mention_exception_catchpoint): Ditto.
424 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
426 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
428 2009-04-27 Tom Tromey <tromey@redhat.com>
430 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
432 2009-04-27 Jerome Guitton <guitton@adacore.com>
434 * symtab.c (append_exact_match_to_sals): New function, extracted
435 from expand_line_sal.
436 (expand_line_sal): Use append_exact_match_to_sals to append exact
437 matches. If none found, append all best items.
439 2009-04-27 Jerome Guitton <guitton@adacore.com>
441 * main.c (captured_main): Move gdbinit lookups after gdb_init.
443 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
446 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
447 (read_func_scope): Call inherit_abstract_dies.
449 2009-04-25 Eli Zaretskii <eliz@gnu.org>
451 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
452 sparc-sol2-nat.c and sparc-sol2-tdep.c.
454 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
456 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
458 ARI change: Use "/* ARI: rule */" pattern.
459 * utils.c: Update ARI patterns.
460 * gdb_dirent.h: Likewise.
462 2009-04-23 Anthony Green <green@moxielogic.com>
464 * MAINTAINERS: Add moxie target.
465 * configure.tgt: Add moxie-*-elf target.
466 * moxie-tdep.c: New file.
467 * moxie-tdep.h: New file.
469 2009-04-23 Joel Brobecker <brobecker@adacore.com>
471 * ada-lang.c: Remove an extra empty line. No code change.
473 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
475 Fix double free on error inserting the breakpoint instruction.
476 * breakpoint.c (create_breakpoints): Move the
477 update_global_location_list call to ...
478 (break_command_really): ... here together with the second local call
479 both unified after all the cleanups.
481 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
482 Tom Tromey <tromey@redhat.com>
484 * configure, config.in: Regenerate.
485 * configure.ac: Support for relocatable GDB datadir. Use
486 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
487 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
488 * top.c (init_main): Add "set data-directory".
489 * defs.h (gdb_datadir): Declare.
490 * main.c (gdb_datadir): New global.
491 (captured_main): Initialize gdb_datadir. Use relocate_directory.
492 (relocate_path): New function.
493 (relocate_directory): Likewise.
494 (get_init_files): Use relocate_path.
495 (README): Mention --with-gdb-datadir.
497 2009-04-23 Joel Brobecker <brobecker@adacore.com>
499 * ada-tasks (task_command_1): Call target_find_new_threads.
501 2009-04-23 Joel Brobecker <brobecker@adacore.com>
503 * stack.c (do_gdb_disassembly): Print the exception message if an
504 error was thrown while trying to perform the disassembly.
506 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
508 * varobj.c (free_variable): Replace free_current_contents by xfree.
510 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
512 * arm-linux-nat.c (fetch_register, store_register): Use
513 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
514 * arm-linux-tdep.c (arm_linux_supply_gregset,
515 arm_linux_collect_gregset): Likewise.
516 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
517 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
519 2009-04-22 Hui Zhu <teawater@gmail.com>
521 * stack.c (_initialize_stack): Set the default of
522 disassemble-next-line to off.
524 2009-04-21 Tom Tromey <tromey@redhat.com>
526 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
527 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
529 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
531 * configure.ac: Add quotes to not lose brackets in help text.
532 * configure: Rebuild.
534 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
536 * configure.ac: Don't postprocess Makefile in config.status.
537 Substitute GDB_NM_FILE. Don't substitute nm_h.
538 * Makefile.in (GDB_NM_FILE): Substitute.
539 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
540 * configure: Regenerate.
541 * gnulib/Makefile.in: Regenerate.
543 2009-04-21 Joseph Myers <joseph@codesourcery.com>
545 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
546 --with-htmldir): New.
547 * configure: Regenerate.
549 2009-04-21 Tom Tromey <tromey@redhat.com>
551 * configure: Rebuild.
552 * configure.ac: Use lower case for start of help strings. Clean
553 up --with-sysroot help.
555 2009-04-21 Tom Tromey <tromey@redhat.com>
557 * configure: Rebuild.
558 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
559 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
562 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
564 ARI fix: remove "%p".
565 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
566 (ia64_sigtramp_frame_this_id): Ditto.
567 (ia64_libunwind_frame_this_id): Ditto.
568 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
569 * symmisc.c (maintenance_info_psymtabs): Ditto.
571 2009-04-21 Joseph Myers <joseph@codesourcery.com>
573 * configure.ac (--with-relocated-sources): New.
574 * configure, config.in: Regenerate.
575 * source.c (add_substitute_path_rule): Remove static.
576 * source.h (add_substitute_path_rule): Declare.
577 * main.c: Include "source.h".
578 (captured_main): Add substitution rule if RELOC_SRCDIR.
580 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
582 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
584 2009-04-20 David Daney <ddaney@caviumnetworks.com>
586 * NEWS: Mention MIPS/Linux hardware watchpoint support.
588 2009-04-20 David Daney <ddaney@caviumnetworks.com>
590 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
591 (maint_show_dr, super_close): New variables.
592 (super_fetch_registers, super_store_registers): Make static.
593 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
594 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
595 (pt_watch_style): Define new enum.
596 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
598 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
600 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
601 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
602 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
603 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
604 (type_to_irw, fill_mask, try_one_watch)
605 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
606 (mips_linux_new_thread, populate_regs_from_watches)
607 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
608 (mips_linux_close): New functions.
609 (_initialize_mips_linux_nat): Register watchpoint functions with
610 the target_ops. Add show-debug-regs maintenance command.
612 2009-04-20 David Daney <ddaney@caviumnetworks.com>
614 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
616 2009-04-19 Pedro Alves <pedro@codesourcery.com>
618 * NEWS: Mention gdbserver support for x86 Windows CE.
620 2009-04-19 Eli Zaretskii <eliz@gnu.org>
622 * config/djgpp/fnchange.lst: Fix typos.
624 Set default host and target charsets in the DJGPP port.
626 * config/djgpp/config.sed (am_cv_langinfo_codeset)
627 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
628 in all configure scripts that define ac_cv_env_CPP_value.
630 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
633 * config/djgpp/nl_types.h: New file.
635 * config/djgpp/langinfo.h: New file.
637 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
639 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
641 * Makefile.in (MAKEHTML): Set to makeinfo --html.
642 (MAKEHTMLFLAGS): Set to empty.
644 2009-04-18 Eli Zaretskii <eliz@gnu.org>
646 * NEWS: Mention all new set/show commands added since GDB 6.8 was
649 * go32-nat.c (go32_sysinfo): Check if the call to
650 __dpmi_get_capabilities fills the buffer with information, and
651 don't use the buffer if not.
653 2009-04-17 Tom Tromey <tromey@redhat.com>
655 * charset.c (_initialize_charset): Add special case for "646".
657 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
659 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
660 * configure: Regenerate.
661 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
662 configure substitutions.
663 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
665 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
667 ARI fix: Do not use %p, replace by call to host_address_to_string
669 * darwin-nat.c (darwin_xfer_partial): Apply change.
670 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
671 * gnu-nat.h (proc_debug): Ditto.
672 * symmisc.c (maintenance_info_symtabs): Ditto.
673 (maintenance_info_psymtabs): Ditto.
674 * windows-nat.c (handle_load_dll): Ditto.
675 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
676 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
678 2009-04-17 Joseph Myers <joseph@codesourcery.com>
680 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
682 (sparc-*-linux*): Likewise.
684 2009-04-17 Eli Zaretskii <eliz@gnu.org>
686 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
689 2009-04-16 Pedro Alves <pedro@codesourcery.com>
691 * remote.c (remote_query_attached): Fix pasto in packet_ok result
694 2009-04-16 Joel Brobecker <brobecker@adacore.com>
696 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
697 Revert the previous change. Might not be correct, actually.
699 2009-04-16 Joel Brobecker <brobecker@adacore.com>
701 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
702 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
703 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
704 Remove declaration. These are non-existent functions.
706 2009-04-16 Joel Brobecker <brobecker@adacore.com>
708 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
709 Fix a compilation warning on mips-irix due to casting from
710 a pointer of different size.
712 2009-04-16 Joel Brobecker <brobecker@adacore.com>
714 * ada-lang.c (symtab_for_sym): Delete.
715 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
717 2009-04-16 Joel Brobecker <brobecker@adacore.com>
719 * ada-lang.c (extract_string): Delete.
720 (ada_main_name): Reimplement using target_read_string instead of
723 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
725 * m68klinux-nat.c: Remove obsolete comment.
726 (fetch_register, store_register): Don't call
727 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
728 which are always nops here.
730 2009-04-14 Tom Tromey <tromey@redhat.com>
732 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
733 (c_printstr): Likewise.
734 * charset.c: Include gdb_wait.h.
735 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
736 (find_charset_names): Use pexecute. Handle libiconv's output.
738 (_initialize_charset): Use xstrdup.
739 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
741 (INTERMEDIATE_ENCODING): New define.
742 * configure, config.in: Rebuild.
743 * configure.ac: Check for btowc.
745 2009-04-15 Tom Tromey <tromey@redhat.com>
747 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
749 2009-04-15 Eli Zaretskii <eliz@gnu.org>
751 * utils.c (parse_escape): Initialize target_char to pacify GCC.
753 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
755 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
757 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
759 ARI fix: sprintf rule.
760 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
761 * ada-lang.c (add_angle_brackets): Use xstrprintf.
762 (ada_decode): Replace sprintf by xsnprintf.
763 (find_old_style_renaming_symbol): Ditto.
764 (ada_to_fixed_type_1, ada_enum_name): Ditto.
767 2009-04-14 Joel Brobecker <brobecker@adacore.com>
769 * target.c (target_mourn_inferior): Call bfd_cache_close_all
770 after having executed the target mourn_inferior routine.
772 2009-04-14 Eli Zaretskii <eliz@gnu.org>
774 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
777 2009-04-13 David Daney <ddaney@caviumnetworks.com>
779 * infrun.c (maybe_software_singlestep): New function.
780 (resume): Call maybe_software_singlestep.
781 (handle_inferior_event): Same.
783 2009-04-13 Tom Tromey <tromey@redhat.com>
785 * python/python-frame.c (frapy_richcompare): Return
786 Py_NotImplemented, not an error. Handle Py_NE as well.
788 2009-04-13 Eli Zaretskii <eliz@gnu.org>
790 * charset.c (EILSEQ): Define if not defined by system headers.
792 2009-04-11 Eli Zaretskii <eliz@gnu.org>
794 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
795 to be consistent with renaming config.intl.in into config_intl.in.
797 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
798 consistent with the change from 2008-11-09.
800 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
802 * gdbtypes.c: Remove excessive parentheses at the return keywords.
803 * varobj.c (varobj_invalidate): Fix indentation.
804 * varobj.c (varobj_invalidate): Fix formatting text width.
806 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
808 Implement -exec-jump.
810 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
811 * mi/mi-main.c (mi_cmd_exec_jump): New.
812 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
814 2009-04-07 Doug Evans <dje@google.com>
816 * symfile.c (symbol_file_clear): Fix indentation.
818 2009-04-06 Mark Kettenis <kettenis@gnu.org>
820 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
822 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
824 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
825 (ppc_linux_auxv_parse): New function.
826 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
827 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
829 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
831 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
832 BFD to contents of SPU name note.
833 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
834 with "from_tty" argument 1 instead of 0.
836 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
839 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
840 Create the symbol in local scope.
841 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
843 2009-04-02 Keith Seitz <keiths@redhat.com>
845 * stabsread.c (read_member_functions): GCC may emit an extra space
846 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
847 whitespace when looking for these functions.
849 2009-04-01 Joel Brobecker <brobecker@adacore.com>
851 Change the default value for "set print frame-arguments" to scalars.
853 * stack.c (print_frame_arguments): Set initial value to "scalars".
855 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
857 * mips-tdep.c (mips_numeric_register_alieses): New definition.
858 (mips_gdbarch_init): Add user registers from
859 mips_numeric_register_aliases.
861 2009-04-01 Joel Brobecker <brobecker@adacore.com>
863 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
865 2009-04-01 Joel Brobecker <brobecker@adacore.com>
867 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
868 this is the last one.
870 2009-04-01 Pedro Alves <pedro@codesourcery.com>
872 * remote.c (append_resumption): New.
873 (remote_vcont_resume): Use it.
875 2009-04-01 Joel Brobecker <brobecker@adacore.com>
877 * windows-nat.c (+windows_get_ada_task_ptid): New function.
878 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
880 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
881 Keith Seitz <keiths@redhat.com>
882 Jan Kratochvil <jan.kratochvil@redhat.com>
885 * Makefile.in (dbxread.o): Update.
886 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
887 * dwarf2read.c (GDB_FORM_cached_string): New.
888 (read_partial_die): Use dwarf2_canonicalize_name.
889 (dwarf2_linkage_name): Use dwarf2_name.
890 (dwarf2_canonicalize_name): New.
891 (dwarf2_name): Use dwarf2_canonicalize_name.
892 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
893 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
894 * symtab.c (lookup_symbol_in_language): Canonicalize input before
896 * cp-name-parser.y: operator() requires two parameters,
897 according to libiberty.
898 * minsyms.c (lookup_minimal_symbol): Canonicalize input
902 2009-03-31 Joel Brobecker <brobecker@adacore.com>
904 Provide support for (Ada) task-specific breakpoints.
906 * ada-lang.h (ada_get_task_number): Add declaration.
907 (breakpoint_ada_task_match): Delete declaration.
908 * ada-tasks.c (ada_get_task_number): Make non-static.
909 * breakpoint.h (struct breakpoint): Add field "task".
910 * breakpoint.c (print_one_breakpoint_location): Add handling of
911 task-specific breakpoints.
912 (create_breakpoint, create_breakpoints, find_condition_and_thread):
913 New parameter "task".
914 (break_command_really): Update calls to find_condition_and_thread
915 and create_breakpoints.
916 (breakpoint_re_set_one): Update call to find_condition_and_thread.
919 2009-03-31 Joel Brobecker <brobecker@adacore.com>
921 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
923 2009-03-31 Pedro Alves <pedro@codesourcery.com>
925 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
926 if the thread's ptid without a thread id field is in the list
927 before calling thread_change_ptid.
928 (extended_remote_attach_1): In non-stop mode, do not rely on
929 querying the current thread, instead, query the thread list, and
930 select the first thread of the process.
931 * gdbthread.h (first_thread_of_process): Declare.
932 * thread.c (first_thread_of_process): Define.
934 2009-03-30 Stan Shebs <stan@codesourcery.com>
936 Make tracepoints into a type of breakpoint.
937 * breakpoint.h (enum bptype): Add bp_tracepoint.
938 (struct breakpoint): Add fields step_count, pass_count, actions.
939 (get_tracepoint, get_tracepoint_by_number): Declare.
940 (all_tracepoints): Declare.
941 * breakpoint.c: Include tracepoint.h, readline.h.
942 (ALL_TRACEPOINTS): Move here from tracepoint.c.
943 (tracepoint_count): Ditto.
944 (should_be_inserted): GDB does not insert tracepoints itself.
945 (print_it_typical): Add tracepoint case.
946 (bpstat_what): Ditto.
947 (print_one_breakpoint_location): Ditto, and add printing for
948 pass count, step count, and action list.
949 (user_settable_breakpoint): Add tracepoint case.
950 (allocate_bp_location): Ditto.
951 (set_breakpoint_location_function): Ditto.
952 (disable_breakpoints_in_shlibs): Ditto.
954 (break_command_really): Add argument traceflag, use to choose
955 basic breakpoint type.
956 (break_command_1): Pass extra argument.
957 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
958 (breakpoint_re_set_one): Add tracepoint case.
959 (disable_command, enable_command): Ditto.
960 (set_tracepoint_count): Move here from tracepoint.c.
961 (trace_command): Move here from tracepoint.c and use
962 break_command_really.
963 (tracepoints_info): Move here from tracepoint.c and call
965 (enable_trace_command): Move here from tracepoint.c and call
967 (disable_trace_command): Move here from tracepoint.c and call
969 (delete_trace_command): Move here from tracepoint.c and call
971 (trace_pass_command): Move here from tracepoint.c.
972 (get_tracepoint_by_number): Ditto.
973 (tracepoint_save_command): Ditto.
974 (get_tracepoint): New function.
975 (all_tracepoints): New function.
976 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
977 deprecate "enable trace" and "disable trace" commands.
978 * tracepoint.h (struct tracepoint): Remove.
979 (tracepoint_chain): Remove decl.
980 (deprecated_create_tracepoint_hook): Remove decl.
981 (deprecated_delete_tracepoint_hook): Remove decl.
982 (deprecated_modify_tracepoint_hook): Remove decl.
983 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
984 (free_actions): Update signature.
985 (validate_actionline): Update signature.
986 (end_actions_pseudocommand): Declare.
987 (while_stepping_pseudocommand): Declare.
988 * tracepoint.c: Include breakpoint.h.
989 (tracepoint_chain, tracepoint_count): Remove.
990 (free_actions, make_cleanup_free_actions): Update signature.
991 (trace_command, set_raw_tracepoint): Remove.
992 (trace_mention): Remove.
993 (tracepoints_info): Remove.
994 (tracepoint_operation, map_args_over_tracepoints): Remove.
995 (get_tracepoint_by_number): Remove.
996 (enable_trace_command, disable_trace_command): Remove.
997 (delete_trace_command, trace_pass_command): Remove.
998 (trace_actions_command, read_actions): Update signature.
999 (validate_actionline): Update signature, use bp loc.
1000 (encode_actions): Ditto.
1001 (download_tracepoint): New function, body of trace_start_command.
1002 (trace_start_command): Call it, use all_tracepoints.
1003 (tracepoint_save_command): Remove.
1004 (tracepoint_dump_command): Use get_tracepoint.
1005 (end_actions_pseudocommand): Make globally visible.
1006 (while_stepping_pseudocommand): Ditto.
1007 (_initialize_tracepoint): Move command definitions to breakpoint.c.
1009 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1011 Expose frames to Python.
1012 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
1013 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
1014 (python-frame.o): New target.
1015 * python/python-frame.c: New file.
1016 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
1017 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
1018 gdbpy_initialize_frames): New prototypes.
1019 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
1020 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
1022 * stack.c (find_frame_funname): New function, factored out of
1024 (print_frame): Call find_frame_funname.
1025 * stack.h (find_frame_funname): Add prototype.
1027 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1029 Remove unused value_object attribute `owned_by_gdb'.
1030 * python/python-value.c (value_object): Remove owned_by_gdb
1032 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1033 (valpy_new): Likewise.
1034 (value_to_value_object): Likewise.
1036 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1038 Change gdb.Value.address from a method to an attribute.
1039 * python/python-value.c (value_object): Add `address' element.
1040 (valpy_dealloc): Decrement reference to self->address if set.
1041 (valpy_new): Initialize val_obj->address.
1042 (valpy_address): Rename to ...
1043 (valpy_get_address): ... this. Change signature from method to
1044 attribute. Update self->address if not set.
1045 (value_to_value_object): Initialize val_obj->address.
1046 (value_object_getset): Add `address' element.
1047 (value_object_methods): Remove `address' element.
1049 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1051 * observer.sh: Set LANG/LC_ALL to C, not c.
1053 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1055 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1058 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1060 * remote.c (remote_stop_ns): If multi-process extensions are off,
1061 and GDB is requesting the whole process to stop, sent "vCont;t",
1064 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1066 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1069 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1071 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1073 2009-03-26 Doug Evans <dje@google.com>
1075 * thread.c (do_restore_current_thread_cleanup): Redo test for
1076 whether to restore old->inferior_ptid.
1078 2009-03-26 Tom Tromey <tromey@redhat.com>
1080 * breakpoint.c (resolve_sal_pc): Preserve original line number
1081 when skipping prologue.
1083 2009-03-26 Doug Evans <dje@google.com>
1085 * thread.c (inferior_thread) Remove "extern" in definition.
1087 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1089 Add gdb.Value.is_optimized_out attribute.
1090 * python/python-value.c (valpy_get_is_optimized_out): New
1092 (value_object_getset): New variable.
1093 (value_object_type): Initialize tp_getset element.
1095 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1097 Recognize missing DW_AT_location as <value optimized out>.
1099 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1100 Call add_symbol_to_list.
1102 2009-03-25 Tom Tromey <tromey@redhat.com>
1104 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1105 * stack.c (print_this_frame_argument_p): Use check_typedef.
1107 2009-03-25 Tom Tromey <tromey@redhat.com>
1109 * configure: Rebuild.
1110 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1111 Rearrange flags setting. Add comments.
1113 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1115 * config/i386/nm-i386.h: Remove code within
1116 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1117 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1119 * config/i386/nm-cygwin64.h: Ditto.
1120 * config/i386/nm-fbsd.h: Ditto.
1121 * config/i386/nm-go32.h: Ditto.
1122 * config/i386/nm-linux.h: Ditto.
1123 * config/i386/nm-linux64.h: Ditto.
1125 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1127 ARI fix: "xasprintf" rule.
1128 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1130 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1132 * remote.c (remote_start_remote): In non-stop mode, call
1133 init_wait_for_inferior before adding threads and inferiors.
1135 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1137 * breakpoint.c (breakpoint_thread_match): Split a large condition
1138 into several smaller conditions. No behavior change.
1140 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1142 * infrun.c (infrun_thread_thread_exit): New.
1143 (_initialize_infrun): Attach it to the thread_exit observer.
1144 * thread.c (delete_thread_1): Always call the observer, passing it
1146 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1147 SILENT, return immediately.
1149 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1151 * infrun.c (normal_stop): Use has_stack_frames instead of
1153 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1154 when there is no thread selected.
1155 (mi_cmd_execute): Don't special case commands that can run without
1156 a valid selected thread.
1157 * top.c (execute_command): Don't special case commands that can
1158 run without a valid selected thread. Use has_stack_frames.
1159 * infcmd.c (ensure_valid_thread): New.
1160 (continue_1, step_1, jump_command, signal_command): Use it.
1161 (detach_command): Error out if there's no selected thread/inferior.
1162 * thread.c (print_thread_info): Allow having no thread selected.
1163 (switch_to_thread): Don't read the PC if there is no current thread.
1164 (do_restore_current_thread_cleanup): Don't record the current
1165 frame if there is no current thread.
1166 (make_cleanup_restore_current_thread): Don't read frame info if
1167 there is no selected thread.
1168 (_initialize_thread): Don't mark commands as
1169 "no_selected_thread_ok".
1170 * frame.c (get_current_frame): Error out if there is no valid
1172 (has_stack_frames): Return false if there is no valid
1174 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1175 "no_selected_thread_ok".
1176 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1177 (get_cmd_no_selected_thread_ok): Delete.
1178 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1179 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1181 * stack.c (get_selected_block): Use has_stack_frames.
1183 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1185 Fix size of FPSCR in Power 7 processors.
1186 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1187 (PPC_FEATURE_HAS_DFP): New #define.
1188 (ppc_linux_read_description): Check for DFP feature instead of
1189 ISA 2.05 to decide on size of the FPSCR.
1191 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1193 * mn10300-tdep.c (trad-frame.h): Don't include.
1194 (prologue-value.h): Include.
1195 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1196 (struct mn10300_prologue): Define.
1197 (push_reg, translate_rreg, check_for_saved): New functions.
1198 (mn10300_analyze_prologue): Rewrite, using prologue-value
1199 machinery. Handle more instructions than before. Permit
1200 instructions to occur in any order.
1201 (mn10300_skip_prologue): Find the extents of the function
1202 in question; mn10300_analyze_prologue no longer does this.
1203 (mn10300_analyze_frame_prologue): New function.
1204 (mn10300_frame_base): New function.
1205 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1207 (mn10300_frame_prev_register): Likewise.
1208 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1209 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1211 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1213 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1215 Fix completer problem for filename completion on the first try.
1217 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1218 * gdb/completer.c: Include gdb_assert.h.
1219 (complete_line_internal_reason): New enum.
1220 (complete_line_internal): Change last argument type to
1221 complete_line_internal_reason.
1222 Modify function to handle the different complete_line_internal_reason
1224 (complete_line): Adapt to change in complete_line_internal.
1225 (command_completer): Ditto.
1226 (gdb_completion_word_break_characters): Implement new function.
1227 * top.c (init_main): Set rl_completion_word_break_hook to
1228 gdb_completion_word_break_characters.
1231 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1233 ARI fix: "strlen d_name" rule.
1234 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1237 2009-03-24 Tom Tromey <tromey@redhat.com>
1238 Pedro Alves <pedro@codesourcery.com>
1240 * configure, config.in: Rebuild.
1241 * configure.ac: Check for libiconvlist.
1242 * charset.c: Check HAVE_LIBICONVLIST.
1243 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1244 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1245 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1247 (INTERNAL_CFLAGS_BASE): Update.
1248 (INTERNAL_LDFLAGS): Update.
1251 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1253 * configure.ac: Initialize the variable $PREFER_CURSES.
1254 * configure: Regenerated.
1256 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1258 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1259 * configure: Regenerated.
1261 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1263 ARI fix: "strerror" rule.
1264 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1265 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1267 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1269 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1270 before looking up the fields inside our struct type.
1272 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1274 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1275 trying to resolve the type qualification.
1277 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1279 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1280 we try to apply the attribute on the real type, rather than
1281 its associated typedef.
1283 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1285 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1286 to make sure we try to get the modulus of the actual type, not the
1289 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1291 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1292 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1293 to get the real type, not the associated typedef.
1295 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1297 * ada-lang.c (ada_get_field_index): Add handling of the case
1298 when TYPE is a typedef of a struct.
1300 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1302 Add gdb_usleep as a portable version of usleep based on gdb_select.
1303 * gdb_usleep.h, gdb_usleep.c: New files.
1304 * Makefile.in (SFILES): Add gdb_usleep.c.
1305 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1306 (COMMON_OBS): Add gdb_usleep.o.
1307 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1308 by call to gdb_usleep.
1310 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1312 * buildsym.c (end_symtab): If we ignore the subfiles, then
1313 unlink the associated symtabs if they were already allocated.
1315 2009-03-23 Jerome Guitton <guitton@adacore.com>
1317 Provide a way to force building of GDB with libcurses.
1318 * configure.ac: Add --with-curses.
1319 * configure: Regenerated.
1321 2009-03-23 Tom Tromey <tromey@redhat.com>
1323 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1326 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1328 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1329 solib_contains_address_p instead of searching.
1331 2009-03-23 Tom Tromey <tromey@redhat.com>
1333 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1334 (iconv): Make 'inbuf' argument const.
1335 (convert_between_encodings): Use ICONV_CONST.
1336 (wchar_iterate): Likewise.
1338 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1340 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1341 dynamically loaded function.
1342 (LookupPrivilegeValueA): Ditto.
1343 (OpenProcessToken): Ditto.
1344 (AdjustTokenPrivileges): Rename and define placeholder for address of
1345 dynamically loaded function.
1346 (LookupPrivilegeValueA): Ditto.
1347 (OpenProcessToken): Ditto.
1348 (set_process_privilege): Remove check for loaded functions.
1349 (bad_OpenProcessToken): Define.
1350 (_initialize_loadable): Load token functions from advapi here, setting
1351 OpenProcessToken function to a dummy static function which always return
1352 error if OS doesn't support this functionality.
1354 2009-03-22 Nicolas Roche <roche@adacore.com>
1355 Christopher Faylor <me+cygwin@cgf.cx>
1357 * win32-nat.c (ctrl_c_handler): New function.
1358 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1359 is run in a separate console.
1361 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1363 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1364 for dynamically loaded function.
1365 (DebugBreakProcess): Ditto.
1366 (DebugSetProcessKillOnExit): Ditto.
1367 (EnumProcessModules): Ditto.
1368 (GetModuleFileNameExA): Ditto.
1369 (GetModuleInformation): Ditto.
1370 (DebugActiveProcessStop): Rename and define placeholder for address of
1371 dynamically loaded function.
1372 (DebugBreakProcess): Ditto.
1373 (DebugSetProcessKillOnExit): Ditto.
1374 (EnumProcessModules): Ditto.
1375 (GetModuleFileNameExA): Ditto.
1376 (GetModuleInformation): Ditto.
1377 (psapi_loaded): Delete.
1378 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1379 dynamically loaded functions will return failure if they weren't
1381 (has_detach_ability): Delete.
1382 (windows_attach): Remove call to has_detach_ability (). Just rely on
1383 functions being callable.
1384 (bad_DebugActiveProcessStop): Define.
1385 (bad_DebugBreakProcess): Ditto.
1386 (bad_DebugSetProcessKillOnExit): Ditto.
1387 (bad_EnumProcessModules): Ditto.
1388 (bad_GetModuleFileNameExA): Ditto.
1389 (bad_GetModuleInformation): Ditto.
1390 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1391 dynamic storage here, setting nonexistent functions to dummy static
1392 functions which always return error.
1394 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1396 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1397 to the about_to_proceed observer notification.
1398 (mi_about_to_proceed): New.
1399 (mi_on_resume): Only output ^running and the prompt here if the
1400 target was proceeded.
1401 * breakpoint.c (breakpoint_proceeded): New static.
1402 (breakpoint_about_to_proceed): New.
1403 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1404 the about_to_proceed observer notification.
1405 * inferior.h (breakpoint_proceeded): Delete declaration.
1406 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1407 Notify the about_to_proceed observers.
1408 (struct inferior_status): Delete breakpoint_proceeded member.
1409 (save_inferior_status): Don't save it.
1410 (restore_inferior_status): Don't restore it.
1411 * mi-main.h (mi_proceeded): Declare.
1412 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1415 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1417 * gdbthread.h (struct thread_info): Add in_infcall member.
1418 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1419 Remove reverences to suppress_resume_observer. Refresh
1420 `call_thread' after returning from `proceed'.
1421 * infcmd.c (suppress_resume_observer): Delete.
1422 * inferior.h (suppress_resume_observer): Delete declaration.
1423 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1425 * thread.c (set_running): Remove references to
1426 suppress_resume_observer.
1427 * infrun.c (struct inferior_status): Add in_infcall member.
1428 (save_inferior_status): Save it.
1429 (restore_inferior_status): Restore it.
1431 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1433 * infcall.c (run_inferior_call): Remove references to
1434 suppress_stop_observer.
1435 * infcmd.c (suppress_stop_observer): Delete.
1436 (finish_command_continuation): Remove NOTE. Don't clear
1437 suppress_stop_observer anymore.
1438 (finish_command_continuation_free_arg): Likewise.
1439 (finish_forward): Remove references to suppress_stop_observer.
1440 Call normal_stop observer if we haven't already.
1441 * inferior.h (suppress_stop_observer): Delete.
1442 * infrun.c (normal_stop): When deciding to suppress the
1443 normal_stop observer, check for proceed_to_finish instead of
1444 suppress_stop_observer.
1446 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1448 * symfile.c (symfile_relocate_debug_section): Remove check for
1451 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1452 Jim Blandy <jimb@red-bean.com>
1453 Thiago Jung Bauermann <bauerman@br.ibm.com>
1454 Tom Tromey <tromey@redhat.com>
1456 Miscellaneous fixes to the Python code.
1457 * python/python-cmd.c (cmdpy_init): Accept keyword
1459 * python/python-value.c (valpy_string): Accept keyword
1461 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1462 Do not call value_to_value_object on NULL RES_VAL.
1463 (value_object_methods): Change `string' entry to also accept
1465 (convert_value_from_python): Return a copy of the value if obj is
1467 (value_object_methods): Mark the `string' method as accepting
1468 keywords, and show method "prototype" in the doc string.
1469 * python/python.c (get_parameter): Don't return inside a
1472 2009-03-20 Tom Tromey <tromey@redhat.com>
1474 Add support for convenience functions in Python.
1475 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1476 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1477 (python-function.o): New target.
1478 * eval.c: Include "python/python.h" and <ctype.h>.
1479 (evaluate_subexp_standard): Handle values of type
1480 TYPE_CODE_INTERNAL_FUNCTION.
1481 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1482 * parse.c (write_exp_string): Remove duplicate word in comment.
1483 * python/python-function.c: New file.
1484 * python/python-internal.h (gdbpy_initialize_functions): Add
1486 * python/python.c (_initialize_python): Call
1487 gdbpy_initialize_functions.
1488 * valprint.c (value_check_printable): Handle values of type
1489 TYPE_CODE_INTERNAL_FUNCTION.
1490 * value.c: Include "cli/cli-decode.h".
1491 (internal_function): New struct.
1492 (functionlist, internal_fn_type): New static variables.
1493 (lookup_only_internalvar,
1494 lookup_internalvar): Add const qualifier to name argument.
1495 (create_internalvar): Likewise. Initialize new field.
1496 (set_internal_var): Fix typo in comment. Don't allow assignment
1497 to canonical variable.
1498 (value_create_internal_function, value_internal_function_name,
1499 call_internal_function, function_command, function_destroyer,
1500 add_internal_function): New functions.
1501 (_initialize_values): Create `function' placeholder command.
1502 Initialize internal_fn_type.
1503 * value.h (lookup_only_internalvar, create_internalvar,
1504 lookup_internalvar): Add const qualifier to name argument.
1505 (internal_function_fn, add_internal_function, call_internal_function,
1506 value_internal_function_name): Add prototypes.
1507 (struct internalvar) <canonical>: New field.
1509 2009-03-20 Tom Tromey <tromey@redhat.com>
1511 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1513 2009-03-20 Tom Tromey <tromey@redhat.com>
1514 Julian Brown <julian@codesourcery.com>
1516 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1517 PR i18n/9401, PR exp/9613:
1519 * value.h (value_typed_string): Declare.
1520 (val_print_string): Update.
1521 * valprint.h (print_char_chars): Update.
1522 * valprint.c (print_char_chars): Add type argument. Update.
1523 (val_print_string): Likewise.
1524 * valops.c (value_typed_string): New function.
1525 * utils.c (host_char_to_target): New function.
1526 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1528 (no_control_char_error): Remove.
1529 * typeprint.c (print_type_scalar): Update.
1530 * scm-valprint.c (scm_scmval_print): Update.
1531 * scm-lang.h (scm_printchar, scm_printstr): Update.
1532 * scm-lang.c (scm_printchar): Add type argument.
1533 (scm_printstr): Likewise.
1534 * printcmd.c (print_formatted): Update.
1535 (print_scalar_formatted): Update.
1536 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1537 Handle '%lc' and '%ls'.
1538 * parser-defs.h (struct typed_stoken): New type.
1539 (struct stoken_vector): Likewise.
1540 (write_exp_string_vector): Declare.
1541 * parse.c (write_exp_string_vector): New function.
1542 * p-valprint.c (pascal_val_print): Update.
1543 * p-lang.h (is_pascal_string_type, pascal_printchar,
1544 pascal_printstr): Update.
1545 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1546 Add 'char_type' argument.
1547 (pascal_emit_char): Add type argument.
1548 (pascal_printchar): Likewise.
1549 (pascal_printstr): Likewise.
1550 * objc-lang.c (objc_emit_char): Add type argument.
1551 (objc_printchar): Likewise.
1552 (objc_printstr): Likewise.
1553 * macroexp.c (get_character_constant): Handle unicode characters.
1555 (get_string_literal): Handle unicode strings. Use
1557 * m2-valprint.c (print_unpacked_pointer): Update.
1558 (m2_print_array_contents): Update.
1559 (m2_val_print): Update.
1560 * m2-lang.c (m2_emit_char): Add type argument.
1561 (m2_printchar): Likewise.
1562 (m2_printstr): Likewise.
1563 * language.h (struct language_defn) <la_printchar>: Add type
1565 <la_printstr, la_emitchar>: Likewise.
1566 (LA_PRINT_CHAR): Likewise.
1567 (LA_PRINT_STRING): Likewise.
1568 (LA_EMIT_CHAR): Likewise.
1569 * language.c (unk_lang_emit_char): Add type argument.
1570 (unk_lang_printchar): Likewise.
1571 (unk_lang_printstr): Likewise.
1572 * jv-valprint.c (java_val_print): Update.
1573 * jv-lang.c (java_emit_char): Add type argument.
1574 * f-valprint.c (f_val_print): Update.
1575 * f-lang.c (f_emit_char): Add type argument.
1576 (f_printchar): Likewise.
1577 (f_printstr): Likewise.
1578 * expprint.c (print_subexp_standard): Update.
1579 * charset.h (target_wide_charset): Declare.
1580 (c_target_char_has_backslash_escape, c_parse_backslash,
1581 host_char_print_literally, host_char_to_target,
1582 target_char_to_host, target_char_to_control_char): Remove.
1583 (enum transliterations): New type.
1584 (convert_between_encodings): Declare.
1585 (HOST_ESCAPE_CHAR): New define.
1586 (host_letter_to_control_character, host_hex_value): Declare.
1587 (enum wchar_iterate_result): New enum.
1588 (struct wchar_iterator): Declare.
1589 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1590 wchar_push_back): Declare.
1591 * charset-list.h: New file.
1592 * c-valprint.c (textual_name): New function.
1593 (textual_element_type): Handle wide character types.
1594 (c_val_print): Pass original type to textual_element_type. Handle
1595 wide character types.
1596 (c_value_print): Use textual_element_type. Pass original type of
1598 * c-lang.h (enum c_string_type): New type.
1599 (c_printchar, c_printstr): Update.
1600 * c-lang.c (classify_type): New function.
1601 (print_wchar): Likewise.
1602 (c_emit_char): Add type argument. Handle wide characters.
1603 (c_printchar): Likewise.
1604 (c_printstr): Add type argument. Handle wide and multibyte
1606 (convert_ucn): New function.
1607 (emit_numeric_character): Likewise.
1608 (convert_octal): Likewise.
1609 (convert_hex): Likewise.
1610 (ADVANCE): New macro.
1611 (convert_escape): New function.
1612 (parse_one_string): Likewise.
1613 (evaluate_subexp_c): Likewise.
1614 (exp_descriptor_c): New global.
1615 (c_language_defn): Use exp_descriptor_c.
1616 (cplus_language_defn): Likewise.
1617 (asm_language_defn): Likewise.
1618 (minimal_language_defn): Likewise.
1619 (charset_for_string_type): New function.
1620 * c-exp.y (%union): Add 'svec' and 'tsval'.
1622 (exp): Add CHAR production.
1623 (string_exp): Rewrite.
1624 (exp) <string_exp>: Rewrite.
1625 (tempbuf): Now global.
1626 (tempbuf_init): New global.
1627 (parse_string_or_char): New function.
1628 (yylex) <tempbuf>: Now global.
1629 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1631 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1632 (c_parse_escape): New function.
1633 * auxv.c (fprint_target_auxv): Update.
1634 * ada-valprint.c (ada_emit_char): Add type argument.
1635 (ada_printchar): Likewise.
1636 (ada_print_scalar): Update.
1637 (printstr): Add type argument. Update calls to ada_emit_char.
1638 (ada_printstr): Add type argument.
1639 (ada_val_print_array): Update.
1640 (ada_val_print_1): Likewise.
1641 * ada-lang.c (emit_char): Add type argument.
1642 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1644 * gdb_locale.h: Include langinfo.h.
1645 * charset.c (_initialize_charset): Set default host charset from
1646 the locale. Don't register charsets. Add target-wide-charset
1647 commands. Call find_charset_names.
1648 (struct charset, struct translation): Remove.
1649 (GDB_DEFAULT_HOST_CHARSET): Remove.
1650 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1651 (target_wide_charset_name): New global.
1652 (show_host_charset_name): Handle "auto".
1653 (show_target_wide_charset_name): New function.
1654 (host_charset_enum, target_charset_enum): Remove.
1655 (charset_enum): New global.
1656 (all_charsets, register_charset, lookup_charset, all_translations,
1657 register_translation, lookup_translation): Remove.
1658 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1659 (iso_8859_print_literally, iso_8859_to_control,
1660 iso_8859_family_charset): Remove.
1661 (ebcdic_print_literally, ebcdic_to_control,
1662 ebcdic_family_charset): Remove.
1663 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1664 register_iconv_charsets): Remove.
1665 (target_wide_charset_be_name, target_wide_charset_le_name): New
1667 (identity_either_char_to_other): Remove.
1668 (set_be_le_names, validate): New functions.
1669 (backslashable, backslashed, represented): Remove.
1670 (default_c_target_char_has_backslash_escape): Remove.
1671 (default_c_parse_backslash, iconv_convert): Remove.
1672 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1673 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1674 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1675 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1676 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1677 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1678 (table_convert_char, table_translation, simple_table_translation):
1680 (current_host_charset, current_target_charset,
1681 c_target_char_has_backslash_escape_func,
1682 c_target_char_has_backslash_escape_baton): Remove.
1683 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1684 (host_char_to_target_func, host_char_to_target_baton): Remove.
1685 (target_char_to_host_func, target_char_to_host_baton): Remove.
1686 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1688 (lookup_charset_or_error, check_valid_host_charset): Remove.
1689 (set_host_and_target_charsets): Remove.
1690 (set_host_charset, set_target_charset): Remove.
1691 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1692 (set_target_wide_charset_sfunc): New function.
1693 (show_charset): Print target wide character set.
1694 (host_charset, target_charset): Rewrite.
1695 (target_wide_charset): New function.
1696 (c_target_char_has_backslash_escape): Remove.
1697 (c_parse_backslash): Remove.
1698 (host_letter_to_control_character): New function.
1699 (host_char_print_literally): Remove.
1700 (host_hex_value): New function.
1701 (target_char_to_control_char): Remove.
1702 (cleanup_iconv): New function.
1703 (convert_between_encodings): New function.
1704 (target_char_to_host): Remove.
1705 (struct wchar_iterator): Define.
1706 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1707 wchar_push_back): New functions.
1708 (do_cleanup_iterator): New function.
1709 (char_ptr): New typedef.
1710 (charsets): New global.
1711 (add_one, find_charset_names): New functions.
1712 (default_charset_names): New global.
1713 (auto_host_charset_name): Likewise.
1714 * aclocal.m4, config.in, configure: Rebuild.
1715 * configure.ac: Call AM_LANGINFO_CODESET.
1716 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1717 (AM_ICONV): Invoke earlier.
1718 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1719 LIBICONV_LIBDIR. Check for libiconv in build tree.
1720 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1721 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1722 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1723 * gdb_obstack.h (obstack_grow_wstr): New define.
1724 * gdb_wchar.h: New file.
1725 * defs.h: Include it.
1727 2009-03-20 Tom Tromey <tromey@redhat.com>
1728 Jan Kratochvil <jan.kratochvil@redhat.com>
1730 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1731 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1733 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1735 * ada-typeprint.c (print_array_type): Do the NULL check
1738 2009-03-19 Tom Tromey <tromey@redhat.com>
1740 * utils.c (do_obstack_free): New function.
1741 (make_cleanup_obstack_free): Likewise.
1742 * defs.h (make_cleanup_obstack_free): Declare.
1744 2009-03-18 Doug Evans <dje@google.com>
1746 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1747 int, not a long long.
1748 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1750 * expprint.c (dump_raw_expression): Print note if non-NULL.
1752 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1755 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1757 * Makefile.in: Update license to GPLv3.
1758 * ada-exp.y: Update license to GPLv3.
1759 * ada-lex.l: Update license to GPLv3.
1760 * c-exp.y: Update license to GPLv3.
1761 * cp-name-parser.y: Update license to GPLv3.
1762 * darwin-nat-info.c: Update license to GPLv3.
1763 * f-exp.y: Update license to GPLv3.
1764 * gdb_thread_db.h: Update license to GPLv3.
1765 * hppanbsd-nat.c: Update license to GPLv3.
1766 * hppanbsd-tdep.c: Update license to GPLv3.
1767 * hppaobsd-tdep.c: Update license to GPLv3.
1768 * jv-exp.y: Update license to GPLv3.
1769 * m2-exp.y: Update license to GPLv3.
1770 * objc-exp.y: Update license to GPLv3.
1771 * p-exp.y: Update license to GPLv3.
1772 * reply_mig_hack.awk: Update license to GPLv3.
1773 * reverse.c: Update license to GPLv3.
1774 * xtensa-xtregs.c: Update license to GPLv3.
1776 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1778 * remote.c (remote_close): Don't call generic_mourn_inferior.
1779 (remote_mourn_1): Call generic_mourn_inferior after closing the
1782 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1784 * remote.c (remote_start_remote): Add missing call to
1785 init_wait_for_inferior in non-stop mode.
1787 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1789 * breakpoint.c (bpstat_should_step): Only consider software
1790 watchpoints that have a location.
1792 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1794 Add a target_ops parameter to the to_kill method in struct target_ops.
1796 * target.h (struct target_ops): Add a "target_ops *" parameter to
1798 (target_kill): Remove macro. Add declaration.
1799 * target.c (debug_to_kill): Delete, no longer necessary.
1800 (target_kill): New function.
1801 (update_current_target): Stop inheriting the to_kill method.
1802 Do not de_fault it to no_process either.
1803 (setup_target_debug): Do not set current_target.to_kill.
1804 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1805 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1806 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1809 2009-03-17 Doug Evans <dje@google.com>
1811 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1812 glibc 2.3.2 and earlier.
1814 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1816 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1817 sanity check if this_frame is not NORMAL.
1818 (frame_id_inner): Update the description of this function.
1820 2009-03-17 Hui Zhu <teawater@gmail.com>
1822 * stack.c: Change the introduce of "disassemble-next-line".
1824 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1826 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1829 2009-03-17 Hui Zhu <teawater@gmail.com>
1831 * stack.c: Include valprint.h.
1832 (disassemble_next_line): New enum.
1833 (show_disassemble_next_line): New function. Show the current
1834 value of disassemble-next-line.
1835 (gdb_disassembly_stub_args): New struct for argument passing
1836 between function do_gdb_disassembly and function
1837 gdb_disassembly_stub.
1838 (gdb_disassembly_stub): New function. Helper for
1840 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1841 the exception from the gdb_disassembly because it will be
1842 broken by filter sometime.
1843 (print_frame_info): If disassemble-next-line is set to auto
1844 or on and doesn't have the line debug messages for $pc,
1845 output the next instruction.
1846 If disassemble-next-line is set to on and there is line debug
1847 messages, output assembly codes for next line.
1848 (_initialize_stack): Make the "set disassemble-next-line"
1849 command an auto-boolean command. Change its class to
1850 class_stack. Place it in the top level set list. Extend help
1851 to describe the auto mode.
1853 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1855 * infrun.c (normal_stop): Don't overwrite old_chain.
1857 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1859 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1860 which is undefined, by call to regcache_invalidate, which should
1861 do what the original author wanted to do.
1863 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1865 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1866 (mips_create_inferior): Likewise.
1868 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1870 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1872 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1874 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1875 building on x86_64-darwin.
1877 2009-03-16 Tristan Gingold <gingold@adacore.com>
1879 * configure.tgt: Add handling for x86_64-darwin.
1881 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1883 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1885 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1887 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1888 Use the ops parameter to get to the target beneath, rather than
1889 using the current_target global. Using the current_target global
1890 was an unintended accident.
1892 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1894 Fix an error happening while loading symbols from a core file
1897 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1898 to detect whether we're debugging a core file or not.
1900 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1902 Modernize the aix-thread later by getting rid of the base_target
1903 global. This brings back to life the AIX port which was otherwise
1904 crashing all the time.
1906 * aix-thread.c (base_target): Delete.
1907 (pd_enable): Do not set base_target.
1908 (aix_thread_attach): Use find_target_beneath instead of base_target.
1909 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1910 (aix_thread_fetch_registers, aix_thread_store_registers),
1911 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1912 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1913 (aix_thread_kill): Delete. Does not seem necessary.
1914 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1916 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1918 * stack.c (return_command <retval_exp>): New variables retval_expr
1919 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1920 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1921 if RETURN_TYPE is NULL.
1923 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1925 * remote.c (PACKET_qAttached): New.
1926 (remote_query_attached): New.
1927 (remote_add_inferior): Add new `attached' argument. Handle it.
1928 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1929 -1 to remote_add_inferior in new parameter.
1930 (extended_remote_attach_1): Adjust to pass 1 to
1931 remote_add_inferior in the new parameter.
1932 (extended_remote_create_inferior_1): Adjust to pass 0 to
1933 remote_add_inferior in the new parameter.
1934 (_initialize_remote): Add "set/show remote query-attached-packet"
1937 2009-03-13 Tom Tromey <tromey@redhat.com>
1939 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1941 2009-03-13 Doug Evans <dje@google.com>
1943 * exceptions.h: Clean up some comments on catch_exceptions usage.
1944 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1947 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1949 The following patch helps getting rid of a warning inside solib-som.c.
1951 * source.c (source_full_path_of): Constify parameter filename.
1952 * defs.h (source_full_path_of): Update declaration accordingly.
1954 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1956 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1957 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1958 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1960 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1962 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1963 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1965 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1967 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1968 * ada-lang.h (ada_task_is_alive): Remove declaration.
1970 2009-03-12 Jerome Guitton <guitton@adacore.com>
1972 * ada-lang.c (ada_delta): Change the type of numerators and
1973 denominators to DOUBLEST, as they may not fit into a long.
1974 (scaling_factor): Ditto.
1976 2009-03-12 Jerome Guitton <guitton@adacore.com>
1978 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1980 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1982 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1983 types, if we are unable to determine the actual symbol type
1984 from its tag, then use the static approximation instead.
1986 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1988 Fix crash printing packed record with packed array.
1990 * ada-lang.c (ada_modulus_from_name): New function.
1991 (ada_modulus): In the case where the type length is bigger than
1992 the size of the type used to hold the bounds, try determining
1993 the modulus from the type name.
1994 (ada_value_primitive_packed_val): Fix bug in the computation of
1995 ntarg causing an out-of-buffer invalid access.
1997 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1999 Fix segfault when printing short_integer'last.
2001 * ada-lang.c (ada_find_any_type): Search in the primitive types
2002 if a symbol could not be found.
2004 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2006 * ada-tasks.c (task_states,long_task_states): Add new states
2007 Activating and Acceptor_Delay_Sleep. Update the description
2008 of state Acceptor_Sleep.
2010 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
2012 Fix a build failure on Darwin following some changes in
2013 the profile of some target_ops methods.
2015 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
2017 (darwin_stop_inferior, darwin_detach): Likewise.
2019 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2021 Include token in ^running notification for CLI commands.
2023 * mi/mi-main.c (mi_execute_command): Set current_token here.
2024 (mi_cmd_execute): Do not set current_token here.
2026 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2030 * mi/mi-main.c (mi_print_timing_maybe): New.
2031 (captured_mi_execute_command): Simplify. Output timings to
2033 (mi_execute_async_cli_command): Do not print timings.
2034 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2035 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2037 2009-03-12 Jerome Guitton <guitton@adacore.com>
2039 * xcoffread.c (process_linenos): Check if the line in the
2040 include table refers to the main source file and, if so,
2041 add them to the main subfile.
2043 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2045 Fix a build failure on AIX introduced after a change in the profile
2046 of some of the "methods" in the target_ops structure.
2047 * aix-thread.c: Add missing target_ops parameter throughout.
2049 Implement Ada task switching on AIX.
2050 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2051 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2053 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2055 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2056 value_mark and value_free_to_mark.
2057 * objfiles.c (free_objfile): Call objfile_free_data before
2060 2009-03-10 Hui Zhu <teawater@gmail.com>
2062 * disasm.c (gdb_disassembly): Remove unused argument
2064 * disasm.h (gdb_disassembly): Ditto.
2065 * cli/cli-cmds.c (print_disassembly): Ditto.
2066 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2068 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2070 * solib.c (solib_contains_address_p): New function.
2071 (solib_name_from_address): Use it.
2072 * printcmd.c (display_uses_solib_p): Use it.
2073 * solib.h (solib_contains_address_p): Declare it.
2075 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2077 * varobj.c (free_variable): Call value_free.
2079 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2082 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2083 Move the variable `macinfo_type' out of the loop. Create a new
2084 processing pass before the current one to pre-create `current_file'.
2085 New complaint on misplaced zero/non-zero definitions/includes.
2086 Skip first DW_MACINFO_start_file with `at_commandline' set.
2088 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2090 * solib.c (reload_shared_libraries): Give
2091 inferior a chance to reset solib breakpoint.
2094 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2096 * windows-nat.c (dr): Redefine to use largest possible integer which
2098 (cygwin_set_dr): Avoid coercion.
2100 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2102 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2105 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2107 Rename solib_address to solib_name_from_address.
2108 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2109 (disable_breakpoints_in_unloaded_shlib): Update.
2110 * printcmd.c (display_uses_solib_p): Likewise.
2111 * stack.c (print_frame): Likewise.
2115 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2117 * printcmd.c (do_one_display): Reparse exp_string.
2118 (display_uses_solib_p): New function.
2119 (clear_dangling_display_expressions): New function.
2120 (_initialize_printcmd): Add observer.
2121 * solib.c (no_shared_libraries): Swap order of calls to
2122 clear_solib and objfile_purge_solibs.
2124 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2126 Implement the target-specific part of Ada tasking support
2129 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2130 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2132 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2134 Get rid of the global "base_target" and use "find_target_beneath"
2135 to find the underlying target.
2136 * dec-thread.c (base_target): Delete.
2137 (enable_dec_thread): Remove assignement to base_target.
2138 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2139 (dec_thread_fetch_registers, dec_thread_store_registers)
2140 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2141 Update the function profile if necessary.
2142 Use find_target_beneath to call the same method but from
2143 the underlying target, removing the need for "base_target".
2145 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2146 Fix a copy/paste error in a few debug traces...
2148 * solib-osf.c (init_so): Use a simpler method for computing
2149 the size of lm_info structure. This also gets rid of warning
2150 emitted by the compiler.
2152 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2154 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2155 duplicates of permanent breakpoints.
2157 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2159 * inferior.h (notice_new_inferior): Declare.
2160 * infcmd.c (notice_new_inferior): New.
2161 * remote.c (remote_add_inferior, remote_add_thread): New.
2162 (notice_new_inferiors): Rename to...
2163 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2164 Use remote_add_thread instead of add_thread, passing it the
2165 RUNNING argument. Add an inferior with remote_add_inferior. If
2166 we just learned about an inferior, call notice_new_inferior.
2167 (record_currthread): Adjust.
2168 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2169 (remote_start_remote, extended_remote_attach_1): Use
2170 remote_add_inferior.
2171 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2172 after handling expedited registers and watchpoint state.
2173 (extended_remote_create_inferior_1): Use remote_add_inferior.
2175 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2177 * infcmd.c (registers_info): Remove register number case.
2179 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2181 * top.c (quit_target): Check for target_has_execution before
2182 killing or detaching from inferiors.
2184 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2186 Remove some unused routines.
2188 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2190 * ada-lang.c (ada_task_list_iterator_ftype)
2191 (iterate_over_live_ada_tasks): Delete.
2192 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2195 2009-03-01 Doug Evans <dje@google.com>
2197 * symtab.c: Remove trailing whitespace throughout the file.
2198 (expand_line_sal): Fix some typos and whitespace.
2200 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2202 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2203 (init.c): signals/ -> common/.
2204 (signals.o): Update.
2205 * target.h (target_signal_to_string,target_signal_to_string)
2206 (target_signal_from_name,target_signal_to_host_p)
2207 (target_signal_from_host,target_signal_to_host): Move to ...
2208 * common/gdb_signals.h: ... here. New file.
2209 * common/signals.c: Moved here from signals/signals.c.
2210 #include gdb_signals.h, remove #include of target.h in gdb case.
2211 (target_signal_from_command,default_target_signal_to_host)
2212 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2214 Include thread ID in target_wait debugging output.
2215 * infrun.c (print_target_wait_results): New function.
2216 (wait_for_inferior,fetch_inferior_event): Call it.
2218 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2220 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2221 with a ptid_t field.
2222 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2223 using the pid stored in proc_handle.ptid.
2224 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2225 (check_for_thread_db, thread_db_detach, check_event)
2226 (thread_db_mourn_inferior, find_new_threads_callback)
2227 (thread_db_find_new_threads_1): Adjust.
2228 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2229 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2231 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2233 * valprint.c (read_string): Rework clean-up logic. Use
2234 free_current_contents to clean-up buffer.
2236 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2238 * MAINTAINERS: Update e-mail address.
2240 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2242 * python/python-utils.c (python_string_to_unicode): Always return
2244 (python_string_to_target_string): Decrement transient python
2246 (python_string_to_host_string): Likewise.
2248 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2250 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2251 call to super_fetch_registers.
2252 (mips64_linux_store_registers): Pass `ops' to call to
2253 super_store_registers.
2255 2009-02-25 Doug Evans <dje@google.com>
2257 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2260 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2261 disabled_shlib_breaks, unused.
2263 * printcmd.c (build_address_symbolic): Fix comment.
2265 2009-02-25 Hui Zhu <teawater@gmail.com>
2267 * cli/cli-script.c (define_command): Add _() to query.
2268 * gnu-nat.c (inf_validate_task_sc): Ditto.
2269 * infcmd.c (kill_if_already_running): Ditto.
2270 (jump_command): Ditto.
2271 (attach_command): Ditto.
2272 * inflow.c (kill_command): Ditto.
2273 * infrun.c (handle_command): Ditto.
2274 * maint.c (maintenance_dump_me): Ditto.
2275 * memattr.c (mem_delete_command): Ditto.
2276 * monitor.c (monitor_interrupt_query): Ditto.
2277 * nto-procfs.c (interrupt_query): Ditto.
2278 * printcmd.c (undisplay_command): Ditto.
2279 * remote-mips.c (mips_kill): Ditto.
2280 * remote.c (interrupt_query): Ditto.
2281 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2282 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2283 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2284 * solib-som.c (som_open_symbol_file_object): Ditto.
2285 * solib-svr4.c (open_symbol_file_object): Ditto.
2286 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2287 * target.c (kill_or_be_killed): Ditto.
2288 * tracepoint.c (delete_trace_command): Ditto.
2289 * top.c (quit_confirm): Add _() to s that will be used
2292 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2294 Fix windows-nat.c compilation failure.
2296 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2297 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2299 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2301 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2303 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2305 * symtab.c (find_line_symtab): Initialize exact to avoid
2308 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2310 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2311 `ops' to recursive call.
2313 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2315 * corelow.c (get_core_registers): Adjust.
2316 (core_file_thread_alive): Rename to...
2317 (core_thread_alive): ... this.
2318 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2319 (init_core_ops): Adjust.
2320 (coreops_suppress_target): Delete.
2321 (_initialize_corelow): Unconditionally add core_ops.
2322 * procfs.c: Include "inf-child.h".
2323 (procfs_ops): Delete.
2324 (init_procfs_ops): Delete. Reimplement as...
2325 (procfs_target): ... this, inheriting from inf-child.
2326 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2327 (procfs_prepare_to_store): Delete.
2328 (procfs_store_registers, procfs_resume): Adjust.
2329 (procfs_open): Delete.
2330 (procfs_suppress_run): Delete.
2331 (procfs_can_run): Delete.
2332 (procfs_mourn_inferior): Adjust.
2333 (procfs_init_inferior): Add target_ops parameter. Adjust.
2334 (procfs_create_inferior): Don't pass procfs_init_inferior to
2335 fork_inferior. Instead call it after fork_inferior returns.
2336 (procfs_find_new_threads): Adjust.
2337 (_initialize_procfs): Adjust to use procfs_target instead of
2339 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2340 (lwp_to_thread): Use target_thread_alive.
2341 (sol_thread_open): Delete.
2342 (sol_thread_attach): Delete.
2343 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2344 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2345 to use find_target_beneath.
2346 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2347 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2348 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2349 (check_for_thread_db): New.
2350 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2351 (sol_thread_new_objfile): Call check_for_thread_db.
2352 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2353 (sol_thread_can_run): Delete.
2354 (sol_thread_alive): Adjust to use find_target_beneath.
2355 (sol_thread_stop): Delete.
2356 (rw_common): Use target_write_memory or target_read_memory.
2357 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2358 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2359 (solaris_pid_to_str): Remove check for libthread_db initialization
2361 (sol_find_new_threads): Remove check for libthread_db
2362 initialization failing, or for an invalid inferior_ptid. Adjust
2363 to use find_target_beneath.
2364 (sol_core_open, sol_core_close, sol_core_detach,
2365 sol_core_files_info, sol_find_memory_regions,
2366 sol_make_note_section, ignore): Delete.
2367 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2368 unneeded callback settings.
2369 (init_sol_core_ops): Delete.
2370 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2371 procfs_suppress_run, or hack with core_ops.
2373 * target.h (struct target_ops): Add a target_ops * parameter to
2374 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2375 and to_find_new_threads.
2376 (target_fetch_registers, target_store_registers)
2377 (target_thread_alive, target_find_new_threads): Redeclare as
2380 * target.c (update_current_target): Do not inherit or de_fault
2381 to_resume, to_fetch_registers, to_store_registers,
2382 to_thread_alive, to_find_new_threads.
2383 (target_resume): Adjust.
2384 (target_thread_alive, target_find_new_threads): New.
2385 (debug_to_resume, debug_to_fetch_registers): Delete.
2386 (target_fetch_registers): New.
2387 (debug_to_store_registers): Delete.
2388 (target_store_registers): New.
2389 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2390 (setup_target_debug): Adjust.
2392 * gdbcore.h (core_ops): Delete declaration.
2394 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2395 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2396 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2397 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2398 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2399 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2400 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2401 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2402 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2403 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2404 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2405 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2406 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2407 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2409 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2410 * gdbarch.h, gdbarch.c: Regenerate.
2412 * sol2-tdep.c: Include "inferior.h".
2413 (sol2_core_pid_to_str): New.
2414 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2416 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2417 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2418 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2419 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2421 2009-02-22 Doug Evans <dje@google.com>
2423 * exec.c (exec_file_attach): Fix comment.
2425 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2427 Silence a few -Wmissing-prototypes warnings.
2430 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2432 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2433 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2434 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2435 (_initialize_amd64nbsd_tdep): ... this.
2436 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2437 (_initialize_arm_linux_tdep): Declare.
2438 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2439 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2440 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2441 * avr-tdep.c (avr_return_value): Make it static.
2442 (avr_frame_unwind_cache): Ditto.
2443 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2444 (bsd_uthread_solib_loaded): Ditto.
2445 (bsd_uthread_solib_unloaded): Ditto.
2446 (bsd_uthread_target): Ditto.
2447 (_initialize_bsd_uthread): Declare.
2448 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2449 (cris_frame_unwind_cache): Ditto.
2450 * frv-tdep.c (frv_return_value): Ditto.
2451 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2452 (h8300h_use_struct_convention): Ditto.
2453 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2455 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2457 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2458 (hppabsd_find_global_pointer): Make it static.
2459 * hppabsd-tdep.h: New.
2460 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2461 (hppabsd_init_abi): Remove declaration.
2462 (_initialize_hppabsd_tdep): Remove declaration.
2463 (_initialize_hppanbsd_tdep): Declare.
2464 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2465 (hppabsd_init_abi): Delete declaration.
2466 (hppaobsd_init_abi): Make it static.
2467 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2468 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2469 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2470 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2471 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2472 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2473 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2474 (_initialize_m32c_tdep): Declare.
2475 * m32r-rom.c (_initialize_m32r_rom): Declare.
2476 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2477 (m32r_return_value): Ditto.
2478 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2479 (m68hc11_return_value): Ditto.
2480 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2481 * m88k-tdep.c (m88k_frame_cache): Make it static.
2482 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2483 (mep_return_value): Ditto.
2484 (_initialize_mep_tdep): Declare.
2485 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2486 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2487 (mips_linux_syscall_next_pc): Ditto.
2488 (_initialize_mips_linux_tdep): Declare.
2489 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2490 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2491 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2492 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2493 * mt-tdep.c (_initialize_mt_tdep): Declare.
2494 * nbsd-tdep.c: Include nbsd-tdep.h.
2495 * nto-tdep.c (find_load_phdr): Make it static.
2496 (_initialize_nto_tdep): Declare.
2497 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2499 (_initialize_ppc_linux_tdep): Declare.
2500 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2501 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2502 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2504 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2505 * rs6000-nat.c: Include xcoffread.h.
2506 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2507 to call xcoff_get_to_offset.
2508 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2509 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2510 (rs6000_skip_trampoline_code): Make static.
2511 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2512 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2513 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2514 (_initialize_shnbsd_tdep): Declare.
2515 * solib-frv.c (displacement_from_map): Make static.
2516 (_initialize_frv_solib): Declare.
2517 * solib-irix.c (fetch_lm_info): Make static.
2518 (_initialize_irix_solib): Declare.
2519 * solib-som.c: Include solib-som.h.
2520 (som_solib_select): Line break.
2521 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2522 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2523 (_initialize_sparcnbsd_tdep): ... this.
2524 * spu-tdep.c (spu_software_single_step): Make it static.
2525 (_initialize_spu_tdep): Declare.
2526 * vax-tdep.c (vax_frame_cache): Make it static.
2527 * xcoffread.c: Include xcoffread.h.
2528 (get_toc_offset): Rename to ...
2529 (xcoff_get_toc_offset): ... this.
2530 (_initialize_xcoffread): Declare.
2532 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2533 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2535 (_initialize_xtensa_tdep): Declare.
2537 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2539 Silence a few -Wmissing-prototypes warnings.
2542 * amd64-nat.c: Include "amd64-nat.h".
2543 * fork-child.c (_initialize_fork_child): Ditto.
2544 * gcore.c (_initialize_gcore): Ditto.
2545 * inf-ptrace.c: Include "inf-ptrace.h".
2546 (inf_ptrace_store_registers): Make it static.
2547 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2548 (_initialize_linux_nat): Declare before definition.
2549 * linux-tdep.c: Include "linux-tdep.h".
2550 * linux-thread-db.c (_initialize_thread_db): Declare before
2552 * proc-service.c (_initialize_proc_service): Ditto.
2553 * remote.c (remote_send_printf): Make it static.
2554 * solib.c: Include "solib.h".
2555 * symfile-mem.c (_initialize_symfile_mem): Declare before
2557 * ada-lang.c (ada_la_decode, ada_match_name)
2558 (ada_suppress_symbol_printing, ada_is_array_type)
2559 (ada_value_ptr_subscript, ada_array_length)
2560 (ada_to_static_fixed_value): Make them static.
2561 (_initialize_ada_language): Declare before definition.
2562 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2563 (ada_task_list_changed, ada_new_objfile_observer): Make them
2565 (_initialize_tasks): Declare before definition.
2566 * addrmap.c (_initialize_addrmap): Declare before definition.
2567 * auxv.c (default_auxv_parse): Make it static.
2568 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2570 * breakpoint.c (remove_sal): Add line break.
2571 (expand_line_sal_maybe): Make it static.
2572 * cp-name-parser.y: Include "cp-support.h".
2573 * cp-valprint.c (cp_find_class_member): Make it static.
2574 * eval.c (value_f90_subarray): Ditto.
2575 * exceptions.c (print_any_exception): Ditto.
2576 * findcmd.c (_initialize_mem_search): Declare before definition.
2577 * frame.c (frame_observer_target_changed): Make it static.
2578 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2579 * inf-child.c: Include "inf-child.h".
2580 * inferior.h (valid_inferior_id): Rename to ...
2581 (valid_gdb_inferior_id): ... this.
2582 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2584 * jv-lang.c (java_language_arch_info): Make it static.
2585 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2586 * osdata.c (info_osdata_command): Make it static.
2587 * regcache.c (regcache_observer_target_changed): Make it static.
2588 * reverse.c (_initialize_reverse): Declare before definition.
2589 * stabsread.c (cleanup_undefined_types_noname)
2590 (cleanup_undefined_types_1): Make them static.
2591 * symfile.c (place_section): Make it static.
2592 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2593 * target-descriptions.c (_initialize_target_descriptions): Declare
2595 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2596 (find_default_is_async_p, find_default_supports_non_stop): Make
2598 (target_supports_non_stop): Add prototype.
2599 (dummy_pid_to_str): Make it static.
2600 * utils.c (_initialize_utils): Declare before definition.
2601 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2602 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2603 * target.h (struct target_ops): Add a prototype to the
2604 to_can_execute_reverse callback.
2605 * macroscope.c (_initialize_macroscope): Declare before definition.
2606 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2607 * python/python.c (_initialize_python): Declare before definition.
2608 * tui/tui-command.c: Include "tui/tui-command.h".
2609 * tui/tui-data.c (init_content_element, init_win_info): Make them
2611 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2612 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2614 * tui/tui-layout.c: Include "tui/tui-layout.h".
2615 (_initialize_tui_layout): Declare before definition.
2616 * tui/tui-regs.c: Include "tui/tui-regs.h".
2617 (tui_display_reg_element_at_line): Make it static.
2618 (_initialize_tui_regs): Declare before definition.
2619 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2621 * tui/tui-win.c: Include "tui/tui-win.h".
2622 (_initialize_tui_win): Declare before definition.
2623 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2624 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2625 (tui_get_cmd_list): Add a prototype.
2626 * tui/tui-windata.c: Include tui-windata.h.
2627 * tui/tui-wingeneral.c (box_win): Make it static.
2628 * cli/cli-logging.c (show_logging_command): Make it static.
2629 (_initialize_cli_logging): Declare before definition.
2630 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2633 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2635 Extend use of i386_use_watchpoints to all i386 native files
2636 using hardware watchpoints.
2637 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2638 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2639 * windows-nat.c (init_windows_ops): Ditto.
2640 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2641 * config/i386/nm-cygwin64.h: Ditto.
2642 * config/i386/nm-fbsd.h: Ditto.
2643 * config/i386/nm-go32.h: Ditto.
2645 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2647 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2649 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2651 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2652 (mi_interpreter_init): Register the above.
2653 * solib.c (clear_solib): Notify solib unload.
2654 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2655 disable breakpoints on a.out targets.
2657 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2659 * observer.c (observer_test_first_notification_function)
2660 (observer_test_second_notification_function)
2661 (observer_test_third_notification_function): Adjust prototype.
2663 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2665 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2666 (ALL_TARGET_OBS): Add dicos-tdep.o.
2667 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2668 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2670 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2672 * dicos-tdep.h, dicos-tdep.c: New.
2673 * amd64-dicos-tdep.c: New.
2674 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2675 inferior.h. Include dicos-tdep.h.
2676 (i386_dicos_init_abi): Call dicos_init_abi.
2677 (i386_dicos_bfd_has_symbol_p): Delete.
2678 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2680 * NEWS: Mention x86-64 DICOS target support.
2682 2009-02-16 Doug Evans <dje@google.com>
2684 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2685 All callers updated.
2686 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2687 (amd64_breakpoint_p): Delete.
2688 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2689 don't back up pc to the start of the int3.
2690 * i386-tdep.c: #include opcode/i386.h.
2691 (i386_skip_prefixes): New function.
2692 (i386_absolute_jmp_p): Constify argument.
2693 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2694 (i386_breakpoint_p): Delete.
2695 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2696 When fixing up after stepping an int3, don't back up pc to the start
2699 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2701 * corelow.c (core_close): Don't hardcode the core's pid.
2702 (core_open): Find core threads before calling
2703 post_create_inferior.
2704 (add_to_thread_list, get_core_register_section): Take into account
2705 systems where the regset section names encode the pid of the
2708 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2709 * gdbarch.h, gdbarch.c: Regenerate.
2711 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2712 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2713 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2714 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2716 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2718 Include frame information for *stopped due to CLI commands.
2720 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2721 * infcmd.c (finish_command_continuation): Pass '1' for
2722 'print_frame' parameter to the observer.
2723 * infrun.c (normal_stop): Don't print mi-specific information
2724 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2726 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2727 If we need to print frame, and current uiout is not the MI one,
2730 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2732 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2733 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2735 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2738 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2739 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2741 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2743 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2744 for DW_ATE_signed_char and DW_ATE_unsigned_char
2745 for pascal language.
2747 2009-02-11 Jim Meyering <meyering@redhat.com>
2748 Jan Kratochvil <jan.kratochvil@redhat.com>
2750 Avoid NULL dereference.
2751 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2752 New variable func_type.
2754 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2756 * gdbarch.c: Regenerate.
2758 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2760 * p-lang.c (is_pascal_string_type): Fix comment.
2761 Determine exact size of char elements for GPC
2763 (pascal_printstr): Handle char width of 2 or 4.
2764 * p-valprint.c (pascal_val_print): Handle char
2767 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2769 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2770 inside the loop. Only call addrmap_set_empty if the compilation unit
2771 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2772 scan_partial_symbols.
2773 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2775 (add_partial_namespace): Take NEED_PC argument and pass it through.
2776 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2779 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2781 * NEWS: Mention inspecting extra signal information, $_siginfo,
2782 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2784 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2786 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2789 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2791 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2792 (compat_timer_t, compat_clock_t, struct compat_timeval)
2793 (compat_sigval_t, compat_siginfo_t): New types.
2794 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2795 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2796 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2797 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2798 (amd64_linux_siginfo_fixup): New.
2799 * linux-nat.c (linux_nat_siginfo_fixup): New.
2800 (siginfo_fixup): New.
2801 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2802 siginfo layout expected by ptrace and the siginfo layout of the
2804 (linux_nat_set_siginfo_fixup): New.
2805 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2807 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2809 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2810 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2811 (siginfo_value_funcs): New.
2812 (siginfo_make_value): New.
2813 (_initialize_infrun): Create the $_siginfo convenience variable.
2814 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2815 * gdbtypes.c (append_composite_type_field): Rename to...
2816 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2817 argument. Handle it.
2818 (append_composite_type_field): Rewrite on top of
2819 append_composite_type_field_aligned.
2820 * value.h (internalvar_make_value): New typedef.
2821 (struct internalvar) <make_value>: New field.
2822 (create_internalvar_type_lazy): Declare.
2823 * value.c (create_internalvar): Clear make_value.
2824 (create_internalvar_type_lazy): New.
2825 (value_of_internalvar): If make_value is set use it.
2826 (preserve_values): Skip internal variables that don't have a
2828 * gdbarch.sh (get_siginfo_type): New.
2829 * gdbarch.h, gdbarch.c: Regenerate.
2831 * linux-tdep.h, linux-tdep.c: New.
2832 * amd64-linux-tdep.c: Include "linux-tdep.h".
2833 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2834 linux_get_siginfo_mapper.
2835 * i386-linux-tdep.c: Include "linux-tdep.h".
2836 (i386_linux_init_abi): Register linux_get_siginfo_type and
2837 linux_get_siginfo_mapper.
2838 * arm-linux-tdep.c: Include "linux-tdep.h".
2839 (i386_linux_init_abi): Register linux_get_siginfo_type and
2840 linux_get_siginfo_mapper.
2842 * linux-nat.c (linux_xfer_siginfo): New.
2843 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2844 * remote.c (PACKET_qXfer_siginfo_read)
2845 (PACKET_qXfer_siginfo_write): New.
2846 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2847 "qXfer:siginfo:write" features.
2848 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2849 (_initialize_remote): Add "set/show remote read-siginfo-object"
2850 and "set/show remote write-siginfo-object" commands.
2852 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2853 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2854 (ALLDEPFILES): Add linux-tdep.c.
2856 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2857 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2860 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2861 Daniel Jacobowitz <dan@codesourcery.com>
2862 Vladimir Prus <vladimir@codesourcery.com>
2863 Pedro Alves <pedro@codesourcery.com>
2865 * defs.h (enum lval_type): New value: lval_computed.
2866 * value.h (struct lval_funcs): New type.
2867 (allocate_computed_value, value_computed_funcs)
2868 (value_computed_closure): New declarations.
2869 * value.c (struct value): Add a structure to the location union
2870 for computed lvalues, containing 'funcs' and 'closure' members.
2871 (allocate_computed_value, value_computed_funcs)
2872 (value_computed_closure): New functions.
2873 (value_free): For computed lvalues, call the closure's
2874 'free_closure' function before freeing the value itself.
2875 (value_copy): If we're copying an lval_computed value, call the
2876 closure's 'copy_closure' function.
2877 (set_value_component_location): If the original value is a
2878 computed lvalue, then call the closure's 'copy_closure' function.
2879 (value_of_internalvar): If an internal variable's value is a
2880 computed lvalue, make retrieving its value produce an equivalent
2882 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2883 their read function.
2884 (value_assign): Assign to computed lvalues by calling their write
2887 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2889 * linux-nat.c (linux_nat_wait): Adjust.
2890 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2891 * linux-nat.h (thread_db_init): Delete declaration.
2892 * linux-thread-db.c (target_beneath): Delete.
2893 (thread_db_init): Delete.
2894 (thread_db_detach): Use find_target_beneath.
2895 (thread_db_wait): Adjust interface. Use find_target_beneath.
2896 (thread_db_mourn_inferior): Use find_target_beneath.
2897 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2898 (thread_db_async_mask): Delete.
2899 (thread_db_pid_to_str): Adjust interface. Use
2900 find_target_beneath.
2901 (thread_db_get_thread_local_address): Adjust interface. Use
2902 find_target_beneath.
2903 (init_thread_db_ops): Delete references to delete functions.
2904 * target.c (update_current_target): Don't inherit or default
2905 to_wait. Don't inherit to_pid_to_str and
2906 to_get_thread_local_address.
2907 (target_translate_tls_address): Look for a pushed target that
2908 implements to_get_thread_local_address, and use it instead of
2909 checking for target_get_thread_local_address_p.
2910 (target_wait, target_pid_to_str): Reimplement as functions.
2911 (dummy_pid_to_str): New.
2912 (init_dummy_target): Register it.
2913 (debug_to_wait): Delete.
2914 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2915 to_get_thread_local_address accept a pointer to struct target_ops.
2916 (target_wait): Delete macro, and declare as function.
2917 (target_pid_to_str): Likewise.
2918 (target_get_thread_local_address)
2919 (target_get_thread_local_address_p): Delete.
2920 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2921 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2922 (inf_ptrace_pid_to_str): New.
2923 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2924 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2925 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2926 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2928 * corelow.c (core_pid_to_str): Adjust.
2929 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2930 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2931 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2932 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2933 * hpux-thread.c (hpux_thread_wait): Adjust.
2934 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2935 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2936 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2937 * procfs.c (procfs_pid_to_str): Adjust.
2938 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2939 * remote-mips.c (mips_wait): Adjust.
2940 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2941 * remote.c (remote_wait, remote_pid_to_str)
2942 (remote_get_thread_local_address): Adjust.
2943 * rs6000-nat.c (rs6000_wait): Adjust.
2944 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2945 (sol_thread_wait, solaris_pid_to_str): Adjust.
2946 * spu-linux-nat.c (spu_child_wait): Adjust.
2947 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2949 2009-02-06 Tom Tromey <tromey@redhat.com>
2951 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2952 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2953 (python-cmd.o): New target.
2954 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2955 completer prototype.
2956 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2957 make_symbol_completion_list_fn as completer.
2958 (delete_cmd): Call destroyer if one is set.
2959 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2960 completer member. Add destroyer member.
2961 (set_cmd_completer): Add self parameter to
2962 completer prototype.
2963 * command.h (set_cmd_completer): Add cmd parameter to
2964 completer prototype.
2965 * completer.c (noop_completer, filename_completer,
2966 location_completer, expression_completer, command_completer): Adapt
2967 to new completer prototype.
2968 (complete_line_internal): Pass new parameter to completer function.
2969 * completer.h (noop_completer, filename_completer,
2970 location_completer, expression_completer, command_completer): Adapt
2971 prototypes to new completer prototype.
2972 * interps.c (interpreter_completer): Adapt to new completer
2974 * python/python-cmd.c: New file.
2975 * python/python-internal.h (gdbpy_initialize_commands): Add
2977 (gdbpy_doc_cst): Add forward declaration.
2978 * python/python.c (gdbpy_doc_cst): Declare.
2979 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2981 * symtab.c (make_symbol_completion_list_fn): New function.
2982 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2984 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2986 * target.c (target_get_osdata): Check for equal or higher than
2987 process_stratum, not dummy_stratum.
2989 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2991 * remote.c (extended_remote_can_run): Delete.
2992 (init_remote_ops): Don't register it.
2993 * target.c (target_get_osdata): Don't check for target_can_run.
2994 Instead any target that has already been pushed, otherwise
2995 fallback to the default run target.
2997 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2999 * target.c (target_create_inferior, target_detach)
3000 (target_mourn_inferior, target_attach, target_close): Do target
3002 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
3003 (debug_to_mourn_inferior, debug_to_close): Delete.
3004 (setup_target_debug): Adjust.
3006 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3008 * target.h (target_stopped_data_address_p): Delete declaration,
3009 and don't define as macro.
3010 * target.c (target_stopped_data_address_p): Delete.
3012 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3013 Tom Tromey <tromey@redhat.com>
3015 * python/python-utils.c (target_string_to_unicode): New function.
3016 * python/python-internal.h (target_string_to_unicode): New prototype.
3017 * python/python-value.c (valpy_string): New function.
3018 (value_object_methods): Add `string' entry.
3020 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3022 * target.h (target_tid_to_str): Delete.
3023 * thread.c (print_thread_info, thread_apply_all_command)
3024 (thread_apply_command, thread_command, do_captured_thread_select):
3025 Use target_pid_to_str instead of target_tid_to_str.
3026 * linux-fork.c (delete_fork_command): Likewise.
3028 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3030 * frame.c (has_stack_frames): Make public.
3031 (get_prev_frame): Don't allow a NULL this_frame anymore.
3032 * frame.h (has_stack_frames): Declare.
3033 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3034 to get_prev_frame, instead start at get_current_frame.
3035 (varobj_create): Check has_stack_frames before getting any frame;
3036 eliminate one usage of deprecated_safe_get_selected_frame.
3038 2009-02-05 Tom Tromey <tromey@redhat.com>
3039 Thiago Jung Bauermann <bauerman@br.ibm.com>
3041 * python/python.c (GdbMethods): Move to bottom of file.
3042 (get_parameter, execute_gdb_command, gdbpy_write,
3043 gdbpy_flush): Remove forward declarations.
3044 (eval_python_from_control_command): Fix error checking of function
3045 PyRun_SimpleString. Fix error string.
3046 (python_command): Likewise.
3047 (execute_gdb_command): Added from_tty argument.
3049 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3051 * language.h (language_dfn): Add la_get_string member.
3052 (LA_GET_STRING): New macro.
3053 (default_get_string): New prototype.
3054 * language.c (default_get_string): New function.
3055 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3056 default_get_string for la_get_string.
3057 * c-lang.c (c_get_string): New function.
3058 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3059 c_get_string for la_get_string.
3060 (minimal_language_defn): Likewise
3061 * ada-lang.c (ada_language_defn): Likewise.
3062 * f-lang.c (f_language_defn): Use default_get_string for
3064 * jv-lang.c (java_language_defn): Likewise.
3065 * m2-lang.c (m2_language_defn): Likewise.
3066 * objc-lang.c (objc_language_defn): Likewise.
3067 * p-lang.c (p_language_defn): Likewise.
3068 * scm-lang.c (scm_language_defn): Likewise.
3069 * typeprint.c (type_to_string): New function.
3070 * value.h (type_to_string): New prototype.
3071 * valprint.c (val_print_string): Factor out code for reading string
3072 from the inferior into its own function. Put 2 spaces after period
3074 (read_string): New function.
3075 * valprint.h (read_string): New prototype.
3077 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3078 Tom Tromey <tromey@redhat.com>
3080 PR breakpoints/8079:
3081 * breakpoint.c (print_one_breakpoint): Use exp_string field
3082 to display expression of watchpoints.
3083 (mention): Likewise.
3084 (watch_command_1): Remove trailing whitespace from expression.
3085 * printcmd.c (struct display) <exp_string>: New field.
3086 (display_command): Set exp_string.
3087 (free_display): Free exp_string.
3088 (clear_displays): Use free_display.
3089 (do_one_display): Print exp_string.
3090 (display_info): Likewise.
3092 2009-02-04 Tom Tromey <tromey@redhat.com>
3093 Thiago Jung Bauermann <bauerman@br.ibm.com>
3094 Phil Muldoon <pmuldoon@redhat.com>
3096 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3097 prototype to gdbpy_history.
3098 (gdbpy_is_string): Declare.
3099 (python_string_to_host_string): Declare.
3100 * python/python-utils.c (gdbpy_is_string): New function.
3101 (unicode_to_encoded_string): New function.
3102 (unicode_to_target_string): Use it.
3103 (python_string_to_host_string): New function.
3104 * python/python-value.c (valpy_address): New function.
3105 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3106 Python exception instead of a GDB exception on error. Properly check
3108 (valpy_getitem): Convert field name to host string. Handle array
3109 accesses. Adapt to new behaviour of convert_value_from_python.
3110 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3111 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3112 VALPY_BITXOR, VALPY_BITOR>: New constants.
3113 (valpy_binop): Update. Adapt to new behaviour of
3114 convert_value_from_python.
3115 (valpy_invert): New function.
3116 (valpy_lsh): Likewise.
3117 (valpy_rsh): Likewise.
3118 (valpy_and): Likewise.
3119 (valpy_or): Likewise.
3120 (valpy_xor): Likewise.
3121 (valpy_richcompare): Call convert_value_from_python instead of doing
3123 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3124 (gdbpy_get_value_from_history): Rename
3125 function to gdbpy_history.
3126 (gdbpy_initialize_values): Don't set tp_new.
3127 (value_object_type): Add valpy_new.
3128 (value_object_methods): Add `address' entry.
3129 (value_object_as_number): Update for new methods.
3130 * python/python.c (GdbMethods): Rename entry from
3131 `get_value_from_history' to `history'.
3133 2009-02-04 Jerome Guitton <guitton@adacore.com>
3135 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3136 of type to guard against a crash.
3138 2009-02-04 Jerome Guitton <guitton@adacore.com>
3140 * value.c (value_from_contents_and_address): Always return
3141 a lval_memory value, even if address is null.
3143 2009-02-04 Tristan Gingold <gingold@adacore.com>
3145 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3146 (amd64_darwin_sigcontext_addr): Ditto.
3147 (darwin_dwarf_signal_frame_p): Ditto.
3148 (i386_darwin_init_abi): Handle signal frames, use the const for
3150 (x86_darwin_init_abi_64): Ditto.
3152 2009-02-04 Tristan Gingold <gingold@adacore.com>
3154 * i386-tdep.c (i386_sigtramp_p): Make it public.
3155 * i386-tdep.h (i386_sigtramp_p): Declare.
3157 2009-02-04 Tristan Gingold <gingold@adacore.com>
3159 * machoread.c (macho_symfile_read): Read minsymtab also from
3161 (macho_symfile_read): Try to read dwarf2 frame info from main
3162 object file, but not from OSO files.
3163 (macho_symfile_offsets): Update section names for latest BFD
3165 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3166 (x86_darwin_init_abi_64): Ditto.
3167 * solib-darwin.c: New file.
3168 * solib-darwin.h: New file.
3169 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3171 2009-02-04 Tristan Gingold <gingold@adacore.com>
3173 * solist.h (struct target_so_ops): Comment fallback behavior for
3176 2009-02-03 Tom Tromey <tromey@redhat.com>
3178 * completer.c (add_struct_fields): Check type_name against NULL
3181 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3183 * MAINTAINERS: Update Elena's email address.
3185 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3187 * breakpoint (update_watchpoint): Minor comment adjustment.
3189 2009-02-02 Tom Tromey <tromey@redhat.com>
3192 * completer.c (count_struct_fields): Count method names.
3193 (add_struct_fields): Add matching method names.
3195 2009-02-02 Doug Evans <dje@google.com>
3197 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3198 doing any further tcl/tk configury. Don't configure gdbtk if
3199 tcl or tk check fails.
3200 * aclocal.m4: Regenerate.
3201 * configure: Regenerate.
3203 2009-02-02 Tom Tromey <tromey@redhat.com>
3206 * valops.c (find_overload_match): Follow typedefs before taking
3207 address of object argument.
3209 2009-02-01 Doug Evans <dje@google.com>
3211 * target.h (target_waitstatus_to_string): Declare.
3212 * target.c (target_waitstatus_to_string): New function. Copied from
3213 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3214 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3215 TARGET_WAITKIND_NO_HISTORY.
3216 (debug_to_wait): Call it.
3217 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3219 (fetch_inferior_event): Ditto.
3221 2009-01-30 Tom Tromey <tromey@redhat.com>
3223 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3225 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3228 * thread.c (do_captured_list_thread_ids): Report the current
3231 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3233 * breakpoint.c (create_breakpoint, create_breakpoints)
3234 (break_command_really, set_breakpoint): New parameter enabled.
3235 (create_breakpoint, break_command_really): Make breakpoint
3236 disabled if so requested.
3237 * breakpoint.h (set_breakpoint): New parameter enabled.
3238 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3240 2009-01-28 Doug Evans <dje@google.com>
3242 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3243 (amd64_displaced_step_fixup): Declare.
3244 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3245 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3246 and make static global.
3247 (amd64_arch_regmap_len): New static global.
3248 (amd64_arch_reg_to_regnum): New function.
3249 (struct amd64_insn): New struct.
3250 (struct displaced_step_closure): New struct.
3251 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3252 (rex_prefix_p,skip_prefixes)
3253 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3254 (amd64_insn_length,amd64_get_unused_input_int_reg)
3255 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3256 (amd64_displaced_step_copy_insn)
3257 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3258 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3259 (amd64_displaced_step_fixup): New functions.
3260 * amd64-linux-tdep.c: #include arch-utils.h.
3261 (amd64_linux_init_abi): Install displaced stepping support.
3263 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3264 Jerome Guitton <guitton@adacore.com>
3266 * configure, config.in: Regenerated.
3267 * configure.ac: Add --with-system-gdbinit.
3268 * main.c (get_init_files): New.
3269 (captured_main): Use get_init_files. Load system gdbinit before
3271 (print_gdb_help): Print location of init files.
3273 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3275 * corefile.c (generic_search): Delete disabled code.
3276 * gdbcore.h (generic_search): Delete declaration.
3278 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3280 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3281 parent to the child.
3282 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3283 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3284 remove_breakpoints to remove breakpoints from the parent.
3286 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3288 PR backtrace/9458, PR backtrace/8864:
3289 * frame.c (create_new_frame): Update the frame's cached PC before
3290 finding its unwinder. Use frame_id_build to build the new frame's
3292 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3293 array values from the ``args'' array values.
3295 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3297 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3298 (create_array_type, create_set_type, init_flags_type)
3299 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3300 with a call to XZALLOC or XCALLOC, and pairs of calls to
3301 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3303 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3305 Add "maint set|show internal-error|internal-warning quit|corefile
3306 ask|yes|no" commands.
3309 * utils.c (internal_problem_ask, internal_problem_yes)
3310 (internal_problem_no, internal_problem_modes): New.
3311 (struct internal_problem): Remove FIXME. Make should_quit and
3312 should_dump_core types to char *.
3313 (internal_vproblem, internal_error_problem)
3314 (internal_warning_problem): Adjust.
3315 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3317 (add_internal_problem_command): New.
3318 (_initialize_utils): New.
3320 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3322 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3325 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3327 * infrun.c (normal_stop): Don't call
3328 deprecated_update_frame_pc_hack.
3329 * frame.c (deprecated_update_frame_pc_hack)
3330 (deprecated_update_frame_base_hack): Delete, and ...
3331 (create_new_frame): ... inline here.
3332 * frame.h (deprecated_update_frame_pc_hack)
3333 (deprecated_update_frame_base_hack): Delete declarations.
3335 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3337 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3338 * cli/cli-setshow.c (do_setshow_command): Handle it.
3339 * command.h (enum var_types): Add var_zuinteger.
3340 (add_setshow_zuinteger_cmd): Declare.
3342 * valprint.c (_initialize_valprint): Change the set input-radix
3343 and set output-radix commands to zuinteger type.
3345 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3348 * infrun.c (normal_stop): Tag threads as stopped, and run the
3349 hook-stop before printing the stack frame.
3351 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3354 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3357 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3359 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3362 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3365 * infcmd.c (signal_command): Do not specify a resume PC.
3367 2009-01-19 Doug Evans <dje@google.com>
3369 * dummy-frame.c (dummy_frame): Replace regcache member with
3371 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3372 All callers updated.
3373 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3374 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3375 dummy frame stack. Restore program state.
3376 (cleanup_dummy_frames): Rewrite.
3377 (dummy_frame_sniffer): Update. Make static.
3378 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3379 (inferior_thread_state): New forward decl.
3380 (dummy_frame_push): Update prototype.
3381 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3383 * infcall.c (breakpoint_auto_delete_contents): Delete.
3384 (get_function_name,run_inferior_call): New fns.
3385 (call_function_by_hand): Simplify by moving some code to
3386 get_function_name, run_inferior_call. Inferior function call wrapped
3387 in TRY_CATCH so there's less need for cleanups and all exits from
3388 proceed are handled similarily. Detect program exit.
3389 Detect program stopping in a different thread.
3390 Make error messages more consistent.
3391 * inferior.h (inferior_thread_state): Declare (opaque type).
3392 (save_inferior_thread_state,restore_inferior_thread_state,
3393 make_cleanup_restore_inferior_thread_state,
3394 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3396 (save_inferior_status): Update prototype.
3397 * infrun.c: (normal_stop): When stopped for the completion of an
3398 inferior function call, verify the expected stack frame kind.
3399 (inferior_thread_state): New struct.
3400 (save_inferior_thread_state,restore_inferior_thread_state,
3401 do_restore_inferior_thread_state_cleanup,
3402 make_cleanup_restore_inferior_thread_state,
3403 discard_inferior_thread_state,
3404 get_inferior_thread_state_regcache): New functions.
3405 (inferior_status): Move stop_signal, stop_pc, registers to
3406 inferior_thread_state. Remove restore_stack_info.
3407 (save_inferior_status): Remove arg restore_stack_info.
3408 All callers updated. Remove saving of state now saved by
3409 save_inferior_thread_state.
3410 (restore_inferior_status): Remove restoration of state now done by
3411 restore_inferior_thread_state.
3412 (discard_inferior_status): Remove freeing of registers, now done by
3413 discard_inferior_thread_state.
3415 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3417 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3418 at a time, times NUM_TO_SCROLL.
3419 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3420 fetch the selected frame if there is no stack.
3422 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3425 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3427 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3428 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3429 is thrown while handling an event, finish the thread state.
3430 (normal_stop): Use finish_thread_state cleanup.
3431 * infcmd.c (run_command_1): If an error is thrown while starting
3432 the inferior, finish the thread state.
3434 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3436 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3437 skip breakpoints without a location (pending breakpoints).
3439 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3442 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3444 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3446 * thread.c (thread_command): Move call to annotate_thread_changed
3448 (do_captured_thread_select): ... here, to avoid printing an
3449 annotation if the thread change generates an exception.
3451 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3453 * NEWS: Document x86_64/MinGW as a new native configuration.
3455 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3457 * NEWS: Move the documentation of "info os processes" to
3458 the appropriate section (documenting the new commands).
3460 2009-01-15 Doug Evans <dje@google.com>
3462 * target.h (target_signal_to_string): Make return type const char *.
3463 (target_signal_to_name): Ditto.
3464 (target_signal_from_name): Make arg const char *.
3465 * infrun.c (sig_print_info): Update.
3466 * signals/signals.c (signals): Make array and struct members const.
3467 (target_signal_to_string): Make return type const char *.
3468 (target_signal_to_name): Ditto.
3469 (target_signal_from_name): Make arg const char *.
3471 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3472 Tristan Gingold <gingold@adacore.com>
3474 * solist.h (struct target_so_ops): New member bfd_open.
3475 (solib_find): Add prototype.
3476 (solib_bfd_fopen): Add prototype.
3477 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3478 from solib_bfd_open.
3479 (solib_bfd_open): Use ops->bfd_open override if present. Call
3480 solib_find and solib_bfd_open otherwise.
3482 * objfiles.h (OBJF_KEEPBFD): New define.
3483 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3484 objfile flag is set.
3485 * solib.c (symbol_add_stub): Do not allocate second BFD for
3486 shared library; use OBJF_KEEPBFD flag on solib objfile.
3488 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3490 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3492 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3494 * value.h (address_of_variable): Add prototype.
3495 (locate_var_value): Remove prototype.
3497 * findvar.c (read_var_value): Do not attempt to default frame
3499 (locate_var_value): Remove function.
3500 * valops.c (value_of_variable): Retrieve selected frame for
3501 symbols that require a frame when called with NULL block.
3502 * valops.c (address_of_variable): New function.
3504 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3505 instead of calling locate_var_value.
3506 (evaluate_subexp_with_coercion): Likewise.
3508 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3510 * NEWS: Document "define" for prefixed commands.
3511 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3512 show_user_1 for prefix commands.
3513 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3514 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3515 commands. Return the containing command list.
3516 (define_command, document_command): Update to handle prefix commands.
3517 (show_user_1): Add prefix and name arguments. Handle prefix
3519 * cli/cli-script.h (show_user_1): Update prototype.
3521 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3523 * mingw-ser.c (console_select_thread): Add return to make
3525 (pipe_select_thread): Likewise.
3526 (file_select_thread): Likewise.
3528 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3530 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3533 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3535 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3536 current general thread.
3538 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3540 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3541 without a live selected thread.
3543 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3545 Update the copyright notice of some of the files I missed
3546 in the previous copyright update.
3548 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3550 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3551 base address instead of casting it to DWORD.
3553 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3555 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3556 for NULL frame pointers.
3558 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3560 * utils.c (host_address_to_string): Reimplement in a way that
3561 avoids the cast of the address to long.
3563 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3565 * mdebugread.c (parse_symbol): Save the symbol private data
3566 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3567 (psymtab_to_symtab_1): Likewise.
3568 (parse_procedure): Declare variable "e" only in the scope
3569 where it is used. Extract the symbol private data using
3572 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3574 Abstract out common code for copying value locations.
3576 * value.h (set_value_component_location): New declaration.
3577 * value.c (set_value_component_location): New function.
3578 (value_primitive_field): Use it.
3579 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3580 * valops.c (search_struct_field, value_slice): Same.
3581 * ada-lang.c (coerce_unspec_val_to_type)
3582 (ada_value_primitive_packed_val): Same.
3584 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3586 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3588 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3590 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3592 * i386-cygwin-tdep.c: Ditto.
3593 * i386-windows-nat.c: Ditto.
3594 * windows-nat.h: Ditto.
3595 * windows-tdep.c: Ditto.
3596 * windows-tdep.h: Ditto.
3597 * windows-nat.c: Ditto.
3598 (cygwin_load_start): Redefine as CORE_ADDR.
3599 (cygwin_load_end): Ditto.
3600 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3601 before coercing to CORE_ADDR to avoid a compiler warning.
3602 (handle_exception): Define addr as CORE_ADDR and coerce
3603 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3605 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3608 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3610 Fix linking with --enable-targets=all:
3611 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3612 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3613 (ALLDEPFILES): Add windows-tdep.c.
3615 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3617 * win32-nat.h: Delete.
3618 * windows-nat.h: Rename from win32-nat.h.
3619 * win32-nat.c: Delete.
3620 * windows-nat.c: Rename from win32-nat.c.
3621 * win32-termcap.c: Delete.
3622 * windows-termcap.c: Rename from win32-termcap.c.
3623 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3624 * configure.ac: Handle rename from win32-termcap.c ->
3626 * configure: Regenerate.
3627 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3628 -> windows-termcap.c.
3629 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3631 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3632 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3634 (win32_make_so): Handle cygwin compiler warning due to change of
3635 load_addr from DWORD to LPVOID.
3636 (handle_load_dll): Use %p in format string to properly print address
3637 and avoid a compiler warning.
3638 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3639 (handle_exception): Ditto.
3640 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3641 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3643 * config/i386/mingw.mh: Ditto.
3644 * config/i386/mingw64.mh: Ditto.
3646 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3648 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3649 arrayprint_recurse_level to a parameter. Update all the callers. New
3650 comment at autovariables.
3652 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3654 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3657 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3659 * target.c (target_xfer_partial): Use host_address_to_string to
3660 print the address of readbuf and writebuf. Cast the address of
3661 elements inside the myaddr buffer into intptr_t.
3662 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3663 Cast the address of elements inside the myaddr buffer into
3666 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3668 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3669 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3670 * configure.host, configure.tgt: Add handling for x86_64/windows.
3671 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3672 and amd64-windows-tdep.c.
3674 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3676 * win32-tdep.h, win32-tdep.c: New files.
3677 * i386-cygwin-tdep.h: Delete.
3678 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3680 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3681 * win32-nat.c: Likewise.
3682 * configure.tgt: Add win32-tdep.o to the list of target object
3683 files for i386-cygwin and i386-mingw targets.
3685 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3687 * win32-nat.h: New file.
3688 * win32-nat.c (mappings): Initialize to NULL.
3689 (win32_set_context_register_offsets): New function.
3690 * i386-windows-nat.c: New file.
3691 (mappings): Moved here from win32-nat.c.
3692 (_initialize_i386_windows_nat): New function.
3693 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3694 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3696 2009-01-09 Andreas Schwab <schwab@suse.de>
3698 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3700 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3702 * gdbtypes.c (append_composite_type_field): Correct the location of
3705 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3707 * defs.h (deprecated_error_hook): Delete declaration.
3708 * interps.c (clear_interpreter_hooks): Adjust.
3709 * remote-sim.c (gdb_os_error): Don't try to call
3710 deprecated_error_hook. No need to call exit anymore.
3711 * top.c (deprecated_error_hook): Delete.
3713 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3715 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3716 to print the address of the gdbarch pointer.
3718 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3720 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3721 due to casting a pointer to a long when printing a function
3722 address. Instead, use host_address_to_string to convert our
3723 address to a string.
3724 * gdbarch.c: Regenerate.
3726 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3728 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3729 instead of "kill" to raise a signal.
3731 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3733 * win32-nat.c (get_module_name): Change the type of parameter
3734 "base_address" to LPVOID. Remove unnecessary cast.
3735 (struct lm_info): Change type of load_addr to LPVOID.
3736 (win32_make_so): Change the type of parameter "load_addr"
3737 to LPVOID. Remove some unnecessary casts.
3738 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3739 (win32_xfer_shared_libraries): Add missing cast.
3741 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3743 * win32-nat.c (has_detach_ability, set_process_privilege):
3744 Cast the result of GetProcAddress to (void *) to avoid
3745 a compilation warning.
3747 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3749 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3752 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3754 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3755 definition of local variable "done".
3756 (info_w32_command, handle_exception): Remove unnecessary cast.
3758 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3760 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3761 DebugSetProcessKillOnExit. Update all uses in this file.
3762 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3763 Update all uses in this file.
3765 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3767 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3768 and use it when pushing the target.
3769 (win32_attach, win32_create_inferior): Update call to
3770 do_initial_win32_stuff.
3771 (win32_detach, win32_mourn_inferior): Use our ops parameter
3772 instead of the global win32_ops to unpush the target.
3774 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3776 * ser-mingw.c (ser_windows_open): Use proper type when casting
3777 in call to _open_osfhandle.
3779 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3781 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3783 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3785 * CONTRIBUTE: Minor reformatting.
3787 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3789 * MAINTAINERS: Add myself to Write After Approval.
3790 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3793 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3795 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3796 Call exit to make it obvious to GCC.
3798 2009-01-08 Tom Tromey <tromey@redhat.com>
3800 PR breakpoints/9350:
3801 * varobj.c (varobj_invalidate): Unconditionally free
3803 * symfile.c (syms_from_objfile): Free local_addr when returning
3805 * exec.c (exec_file_attach): Do cleanups before returning.
3806 (exec_file_command): Likewise.
3807 * corefile.c (reopen_exec_file): Do cleanups before returning.
3808 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3810 (do_vec_free): New function.
3811 (update_global_location_list): Make a cleanup for old_locations.
3812 Do cleanups before returning. Remove unused variable 'e'.
3813 (find_condition_and_thread): Free result of parsing the
3815 (print_it_typical): Do cleanups before returning.
3816 (breakpoint_re_set_one): Always free sals.sals.
3818 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3819 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3821 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3824 2009-01-07 Doug Evans <dje@google.com>
3826 * top.c (gdb_prompt_string): Delete, unused.
3828 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3830 Delete ONE_PROCESS_WRITETEXT leftovers.
3832 * breakpoint.c (insert_bp_location): Delete process_warning
3834 (insert_breakpoint_locations): Adjust.
3835 (reattach_breakpoints): Adjust.
3836 * infrun.c (normal_stop): Drop "It might be running in another
3839 2009-01-07 Stan Shebs <stan@codesourcery.com>
3841 * config/pa/linux.mh (XDEPFILES): Remove.
3843 2009-01-07 Doug Evans <dje@google.com>
3845 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3847 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3849 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3850 spacing, a regression from 2008-04-22.
3852 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3854 * utils.c (gdb_print_host_address): Adjust implementation to
3855 reuse host_address_to_string. Move comment explaining the conversion
3856 from host address to string from here...
3857 (host_address_to_string): ... to there.
3859 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3861 * MAINTAINERS: Add myself for write after approval privileges.
3863 2009-01-06 Tom Tromey <tromey@redhat.com>
3865 * value.c (set_internalvar): Use value_free, not xfree.
3867 2009-01-06 Jim Blandy <jimb@red-bean.com>
3869 Check return values of functions declared with warn_unused_result
3870 attribute in GLIBC 2.8.
3871 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3872 * inflow.c (check_syscall): New function.
3873 (new_tty): Use check_syscall to check return values from open and dup.
3874 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3875 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3876 check for errors from getcwd.
3877 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3878 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3879 (stdio_file_fputs): Same.
3880 * utils.c (internal_vproblem): abort if last-ditch error message
3883 * top.c (gdb_init): Don't set the current directory here; that's
3884 already been done in captured_main.
3886 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3888 * ser-tcp.c: Adjust includes.
3889 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3890 (tcp_auto_retry, tcp_retry_limit): Declare.
3891 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3892 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3893 (wait_for_connect): New function.
3894 (net_open): Use it. Add auto-retry logic.
3895 (set_tcp_cmd, show_tcp_cmd): New functions.
3896 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3897 and "set/show tcp connect-timeout" commands.
3898 * NEWS: Document new commands.
3900 2009-01-05 Tom Tromey <tromey@redhat.com>
3902 * python/python-internal.h (Py_ssize_t): Define as int.
3904 2009-01-05 Jim Blandy <jimb@red-bean.com>
3906 * MAINTAINERS: Fix my e-mail address as steering committee member.
3908 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3910 Updated copyright notices for most files.
3912 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3914 * top.c (print_gdb_version): Update copyright year.
3916 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3918 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3920 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3922 PR breakpoints/9681:
3923 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3924 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3925 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3926 retrow all other exceptions.
3928 For older changes see ChangeLog-2008.
3934 version-control: never
projects / thirdparty / binutils-gdb.git / blob