gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor,
  20 # Boston, MA 02110-1301, USA.
  21
  22 prefix = @prefix@
  23 exec_prefix = @exec_prefix@
  24
  25 host_alias = @host_alias@
  26 target_alias = @target_alias@
  27 program_transform_name = @program_transform_name@
  28 bindir = @bindir@
  29 libdir = @libdir@
  30 tooldir = $(libdir)/$(target_alias)
  31
  32 datadir = @datadir@
  33 localedir = @localedir@
  34 mandir = @mandir@
  35 man1dir = $(mandir)/man1
  36 man2dir = $(mandir)/man2
  37 man3dir = $(mandir)/man3
  38 man4dir = $(mandir)/man4
  39 man5dir = $(mandir)/man5
  40 man6dir = $(mandir)/man6
  41 man7dir = $(mandir)/man7
  42 man8dir = $(mandir)/man8
  43 man9dir = $(mandir)/man9
  44 infodir = @infodir@
  45 pdfdir = $(prefix)/share/doc/gdb
  46 htmldir = $(prefix)/html
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 # Contrary to documentation, the current directory is not
 115 # searched by texi2html, so specify it explicitly.
 116 # -macro 2007-07-26
 117 MAKEHTML = texi2html
 118 MAKEHTMLFLAGS = -menu -split_chapter -I .
 119
 120 # Set this up with gcc if you have gnu ld and the loader will print out
 121 # line numbers for undefined references.
 122 #CC_LD=gcc -static
 123 CC_LD=$(CC)
 124
 125 # Where is our "include" directory?  Typically $(srcdir)/../include.
 126 # This is essentially the header file directory for the library
 127 # routines in libiberty.
 128 INCLUDE_DIR =  $(srcdir)/../include
 129 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 130
 131 # Where is the "-liberty" library?  Typically in ../libiberty.
 132 LIBIBERTY = ../libiberty/libiberty.a
 133
 134 # Where is the BFD library?  Typically in ../bfd.
 135 BFD_DIR = ../bfd
 136 BFD = $(BFD_DIR)/libbfd.a
 137 BFD_SRC = $(srcdir)/$(BFD_DIR)
 138 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 139
 140 # Where is the decnumber library?  Typically in ../libdecnumber.
 141 LIBDECNUMBER_DIR = ../libdecnumber
 142 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 143 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 144 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 145
 146 # Where is the READLINE library?  Typically in ../readline.
 147 READLINE_DIR = ../readline
 148 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 149 READLINE = @READLINE@
 150 READLINE_DEPS = @READLINE_DEPS@
 151 READLINE_CFLAGS = @READLINE_CFLAGS@
 152
 153 # Where is expat?  This will be empty if expat was not available.
 154 LIBEXPAT = @LIBEXPAT@
 155
 156 WARN_CFLAGS = @WARN_CFLAGS@
 157 WERROR_CFLAGS = @WERROR_CFLAGS@
 158 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 159 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 160
 161 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 162
 163 # Where is the INTL library?  Typically in ../intl.
 164 INTL = @LIBINTL@
 165 INTL_DEPS = @LIBINTL_DEP@
 166 INTL_CFLAGS = @INCINTL@
 167
 168 # Where is the ICONV library?  This can be empty if libc has iconv.
 169 LIBICONV = @LIBICONV@
 170
 171 # Did the user give us a --with-sysroot option?
 172 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 173 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 174
 175 # Helper code from gnulib.
 176 LIBGNU = gnulib/libgnu.a
 177 INCGNU = -I$(srcdir)/gnulib -Ignulib
 178
 179 # Generated headers in the gnulib directory.  These must be listed
 180 # so that they are generated before other files are compiled.
 181 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 182
 183 #
 184 # CLI sub directory definitons
 185 #
 186 SUBDIR_CLI_OBS = \
 187         cli-dump.o \
 188         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o cli-utils.o \
 189         cli-logging.o \
 190         cli-interp.o
 191 SUBDIR_CLI_SRCS = \
 192         cli/cli-dump.c \
 193         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 194         cli/cli-logging.c \
 195         cli/cli-interp.c \
 196         cli/cli-utils.c
 197 SUBDIR_CLI_DEPS =
 198 SUBDIR_CLI_LDFLAGS=
 199 SUBDIR_CLI_CFLAGS=
 200
 201 #
 202 # MI sub directory definitons
 203 #
 204 SUBDIR_MI_OBS = \
 205         mi-out.o mi-console.o \
 206         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 207         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 208         mi-interp.o \
 209         mi-main.o mi-parse.o mi-getopt.o mi-common.o
 210 SUBDIR_MI_SRCS = \
 211         mi/mi-out.c mi/mi-console.c \
 212         mi/mi-cmds.c mi/mi-cmd-env.c \
 213         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 214         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 215         mi/mi-cmd-target.c mi/mi-interp.c \
 216         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c mi/mi-common.c
 217 SUBDIR_MI_DEPS =
 218 SUBDIR_MI_LDFLAGS=
 219 SUBDIR_MI_CFLAGS= \
 220         -DMI_OUT=1
 221
 222 #
 223 # TUI sub directory definitions
 224 #
 225
 226 # Name of the TUI program
 227 TUI=gdbtui
 228
 229 SUBDIR_TUI_OBS = \
 230         tui-command.o \
 231         tui-data.o \
 232         tui-disasm.o \
 233         tui-file.o tui.o \
 234         tui-hooks.o \
 235         tui-interp.o \
 236         tui-io.o \
 237         tui-layout.o \
 238         tui-out.o \
 239         tui-regs.o \
 240         tui-source.o \
 241         tui-stack.o \
 242         tui-win.o \
 243         tui-windata.o \
 244         tui-wingeneral.o \
 245         tui-winsource.o
 246 SUBDIR_TUI_SRCS = \
 247         tui/tui-command.c \
 248         tui/tui-data.c \
 249         tui/tui-disasm.c \
 250         tui/tui-file.c \
 251         tui/tui-hooks.c \
 252         tui/tui-interp.c \
 253         tui/tui-io.c \
 254         tui/tui-layout.c \
 255         tui/tui-out.c \
 256         tui/tui-regs.c \
 257         tui/tui-source.c \
 258         tui/tui-stack.c \
 259         tui/tui-win.c \
 260         tui/tui-windata.c \
 261         tui/tui-wingeneral.c \
 262         tui/tui-winsource.c \
 263         tui/tui.c
 264 SUBDIR_TUI_DEPS =
 265 SUBDIR_TUI_LDFLAGS=
 266 SUBDIR_TUI_CFLAGS= \
 267         -DTUI=1
 268
 269 #
 270 # python sub directory definitons
 271 #
 272 SUBDIR_PYTHON_OBS = \
 273         python.o \
 274         python-utils.o
 275 SUBDIR_PYTHON_SRCS = \
 276         python/python.c \
 277         python/python-utils.c
 278 SUBDIR_PYTHON_DEPS =
 279 SUBDIR_PYTHON_LDFLAGS=
 280 SUBDIR_PYTHON_CFLAGS=
 281
 282
 283 # Opcodes currently live in one of two places.  Either they are in the
 284 # opcode library, typically ../opcodes, or they are in a header file
 285 # in INCLUDE_DIR.
 286 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 287 # disassemblers?
 288 OPCODES_DIR = ../opcodes
 289 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 290 OPCODES = $(OPCODES_DIR)/libopcodes.a
 291 # Where are the other opcode tables which only have header file
 292 # versions?
 293 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 294 OPCODES_CFLAGS = -I$(OP_INCLUDE)
 295
 296 # The simulator is usually nonexistent; targets that include one
 297 # should set this to list all the .o or .a files to be linked in.
 298 SIM = @SIM@
 299
 300 WIN32LIBS = @WIN32LIBS@
 301
 302 # Tcl et al cflags and libraries
 303 TCL = @TCL_LIBRARY@
 304 TCL_CFLAGS = @TCL_INCLUDE@
 305 GDBTKLIBS = @GDBTKLIBS@
 306 # Extra flags that the GDBTK files need:
 307 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 308
 309 TK = @TK_LIBRARY@
 310 TK_CFLAGS = @TK_INCLUDE@
 311
 312 X11_CFLAGS = @TK_XINCLUDES@
 313 X11_LDFLAGS =
 314 X11_LIBS =
 315
 316 WIN32LDAPP = @WIN32LDAPP@
 317
 318 LIBGUI = @LIBGUI@
 319 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 320 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 321
 322 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 323
 324 # The version of gdbtk we're building. This should be kept
 325 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 326 GDBTK_VERSION = 1.0
 327 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 328
 329 # Gdbtk requires an absolute path to the source directory or
 330 # the testsuite won't run properly.
 331 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 332
 333 SUBDIR_GDBTK_OBS = \
 334         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 335         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 336 SUBDIR_GDBTK_SRCS = \
 337         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 338         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 339         gdbtk/generic/gdbtk-interp.c \
 340         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 341         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 342         gdbtk/generic/gdbtk-main.c
 343 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 344 SUBDIR_GDBTK_LDFLAGS=
 345 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 346
 347 CONFIG_OBS= @CONFIG_OBS@
 348 CONFIG_SRCS= @CONFIG_SRCS@
 349 CONFIG_DEPS= @CONFIG_DEPS@
 350 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 351 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 352 CONFIG_ALL= @CONFIG_ALL@
 353 CONFIG_CLEAN= @CONFIG_CLEAN@
 354 CONFIG_INSTALL = @CONFIG_INSTALL@
 355 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 356
 357 # -I. for config files.
 358 # -I$(srcdir) for gdb internal headers.
 359 # -I$(srcdir)/config for more generic config files.
 360
 361 # It is also possible that you will need to add -I/usr/include/sys if
 362 # your system doesn't have fcntl.h in /usr/include (which is where it
 363 # should be according to Posix).
 364 DEFS = @DEFS@
 365 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 366
 367 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 368 GLOBAL_CFLAGS = $(MH_CFLAGS)
 369
 370 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 371
 372 # CFLAGS is specifically reserved for setting from the command line
 373 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 374 CFLAGS = @CFLAGS@
 375
 376 # Set by configure, for e.g. expat.
 377 INTERNAL_CPPFLAGS = @CPPFLAGS@
 378
 379 # Need to pass this to testsuite for "make check".  Probably should be
 380 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 381 # so "make check" has the same result no matter where it is run.
 382 CXXFLAGS = -g -O
 383
 384 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 385 INTERNAL_CFLAGS_BASE = \
 386         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 387         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 388         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 389         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 390 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 391 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 392
 393 # LDFLAGS is specifically reserved for setting from the command line
 394 # when running make.
 395 LDFLAGS = @LDFLAGS@
 396
 397 # Profiling options need to go here to work.
 398 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 399 # and have it work; that's why CFLAGS is here.
 400 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 401 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 402
 403 # If your system is missing alloca(), or, more likely, it's there but
 404 # it doesn't work, then refer to libiberty.
 405
 406 # Libraries and corresponding dependencies for compiling gdb.
 407 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 408 # LIBIBERTY appears twice on purpose.
 409 # If you have the Cygnus libraries installed,
 410 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 411 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 412         $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 413         -lintl -liberty $(LIBGNU)
 414 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 415         $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 416         $(LIBICONV) $(LIBEXPAT) \
 417         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 418 CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 419         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 420
 421 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 422 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 423
 424 DIST=gdb
 425
 426 LINT=/usr/5bin/lint
 427 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 428         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 429         $(INTL_CFLAGS)
 430
 431 RUNTEST = runtest
 432 RUNTESTFLAGS=
 433
 434 # XML files to build in to GDB.
 435 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 436         $(srcdir)/features/library-list.dtd
 437
 438 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 439 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 440 # etc., then there will be (as part of the C library or perhaps as
 441 # part of libiberty) a POSIX interface.  But at least for now the
 442 # host-dependent makefile fragment might need to use something else
 443 # besides ser-unix.o
 444 SER_HARDWIRE = @SER_HARDWIRE@
 445
 446 # The `remote' debugging target is supported for most architectures,
 447 # but not all (e.g. 960)
 448 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 449
 450 # This is remote-sim.o if a simulator is to be linked in.
 451 SIM_OBS = @SIM_OBS@
 452
 453 # Target-dependent object files.
 454 TARGET_OBS = @TARGET_OBS@
 455
 456 # All target-dependent objects files that require 64-bit CORE_ADDR
 457 # (used with --enable-targets=all --enable-64-bit-bfd).
 458 ALL_64_TARGET_OBS = \
 459         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 460         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 461         amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \
 462         amd64-sol2-tdep.o amd64-tdep.o \
 463         ia64-linux-tdep.o ia64-tdep.o \
 464         mips64obsd-tdep.o \
 465         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 466         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 467
 468 # All other target-dependent objects files (used with --enable-targets=all).
 469 ALL_TARGET_OBS = \
 470         armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
 471         arm-tdep.o arm-wince-tdep.o \
 472         avr-tdep.o \
 473         cris-tdep.o \
 474         frv-linux-tdep.o frv-tdep.o \
 475         h8300-tdep.o \
 476         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 477         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 478         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 479         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 480         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 481         i386-dicos-tdep.o \
 482         iq2000-tdep.o \
 483         m32c-tdep.o \
 484         m32r-linux-tdep.o m32r-tdep.o \
 485         m68hc11-tdep.o \
 486         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 487         m88k-tdep.o \
 488         mep-tdep.o \
 489         mips-irix-tdep.o mips-linux-tdep.o \
 490         mipsnbsd-tdep.o mips-tdep.o \
 491         mn10300-linux-tdep.o mn10300-tdep.o \
 492         mt-tdep.o \
 493         nto-tdep.o \
 494         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 495         rs6000-aix-tdep.o rs6000-tdep.o \
 496         s390-tdep.o \
 497         score-tdep.o \
 498         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 499         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 500         sparc-sol2-tdep.o sparc-tdep.o \
 501         spu-tdep.o \
 502         v850-tdep.o \
 503         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 504         xstormy16-tdep.o \
 505         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 506         glibc-tdep.o \
 507         bsd-uthread.o \
 508         nbsd-tdep.o obsd-tdep.o \
 509         sol2-tdep.o \
 510         solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 511         solib-som.o solib-pa64.o \
 512         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 513         remote-m32r-sdi.o \
 514         xcoffread.o \
 515         prologue-value.o \
 516         symfile-mem.o \
 517         corelow.o
 518
 519 # Host-dependent makefile fragment comes in here.
 520 @host_makefile_frag@
 521 # End of host-dependent makefile fragment
 522
 523 FLAGS_TO_PASS = \
 524         "prefix=$(prefix)" \
 525         "exec_prefix=$(exec_prefix)" \
 526         "infodir=$(infodir)" \
 527         "pdfdir=$(pdfdir)" \
 528         "libdir=$(libdir)" \
 529         "mandir=$(mandir)" \
 530         "datadir=$(datadir)" \
 531         "includedir=$(includedir)" \
 532         "against=$(against)" \
 533         "DESTDIR=$(DESTDIR)" \
 534         "AR=$(AR)" \
 535         "AR_FLAGS=$(AR_FLAGS)" \
 536         "CC=$(CC)" \
 537         "CFLAGS=$(CFLAGS)" \
 538         "CXX=$(CXX)" \
 539         "CXXFLAGS=$(CXXFLAGS)" \
 540         "DLLTOOL=$(DLLTOOL)" \
 541         "LDFLAGS=$(LDFLAGS)" \
 542         "RANLIB=$(RANLIB)" \
 543         "MAKEINFO=$(MAKEINFO)" \
 544         "MAKEHTML=$(MAKEHTML)" \
 545         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 546         "INSTALL=$(INSTALL)" \
 547         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 548         "INSTALL_DATA=$(INSTALL_DATA)" \
 549         "RUNTEST=$(RUNTEST)" \
 550         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 551
 552 # Flags that we pass when building the testsuite.
 553
 554 # empty for native, $(target_alias)/ for cross
 555 target_subdir = @target_subdir@
 556
 557 CC_FOR_TARGET = ` \
 558   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 559     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 560       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 561     else \
 562       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 563     fi; \
 564   else \
 565     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 566       echo $(CC); \
 567     else \
 568       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 569     fi; \
 570   fi`
 571
 572 CXX = gcc
 573 CXX_FOR_TARGET = ` \
 574   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 575     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 576       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 577     else \
 578       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 579     fi; \
 580   else \
 581     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 582       echo $(CXX); \
 583     else \
 584       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 585     fi; \
 586   fi`
 587
 588 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 589 # duplicating the lengthy definition.
 590 TARGET_FLAGS_TO_PASS = \
 591         "prefix=$(prefix)" \
 592         "exec_prefix=$(exec_prefix)" \
 593         "against=$(against)" \
 594         'CC=$$(CC_FOR_TARGET)' \
 595         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 596         "CFLAGS=$(CFLAGS)" \
 597         'CXX=$$(CXX_FOR_TARGET)' \
 598         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 599         "CXXFLAGS=$(CXXFLAGS)" \
 600         "INSTALL=$(INSTALL)" \
 601         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 602         "INSTALL_DATA=$(INSTALL_DATA)" \
 603         "MAKEINFO=$(MAKEINFO)" \
 604         "MAKEHTML=$(MAKEHTML)" \
 605         "RUNTEST=$(RUNTEST)" \
 606         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 607
 608 # All source files that go into linking GDB.
 609 # Links made at configuration time should not be specified here, since
 610 # SFILES is used in building the distribution archive.
 611
 612 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c  \
 613         addrmap.c \
 614         auxv.c ax-general.c ax-gdb.c \
 615         bcache.c \
 616         bfd-target.c \
 617         block.c blockframe.c breakpoint.c buildsym.c \
 618         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 619         charset.c cli-out.c coffread.c coff-pe-read.c \
 620         complaints.c completer.c corefile.c \
 621         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 622         cp-name-parser.y \
 623         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 624         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 625         elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
 626         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 627         frame.c frame-base.c frame-unwind.c \
 628         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 629         inf-loop.c \
 630         infcall.c \
 631         infcmd.c inflow.c infrun.c \
 632         interps.c \
 633         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 634         language.c linespec.c \
 635         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 636         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 637         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 638         objc-exp.y objc-lang.c \
 639         objfiles.c osabi.c observer.c \
 640         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 641         prologue-value.c \
 642         regcache.c reggroups.c remote.c remote-fileio.c \
 643         scm-exp.c scm-lang.c scm-valprint.c \
 644         sentinel-frame.c \
 645         serial.c ser-base.c ser-unix.c \
 646         solib.c solib-null.c source.c \
 647         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 648         symtab.c \
 649         target.c target-descriptions.c target-memory.c \
 650         thread.c top.c tracepoint.c \
 651         trad-frame.c \
 652         tramp-frame.c \
 653         typeprint.c \
 654         ui-out.c utils.c ui-file.h ui-file.c \
 655         user-regs.c \
 656         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 657         wrapper.c \
 658         xml-tdesc.c xml-support.c
 659
 660 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 661
 662 # Header files that need to have srcdir added.  Note that in the cases
 663 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 664 # so that each .h file is listed exactly once (M-x tags-search works
 665 # wrong if TAGS has files twice).  Because this is tricky to get
 666 # right, it is probably easiest just to list .h files here directly.
 667
 668 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 669 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 670 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 671 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 672 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 673 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 674 osf-share/cma_stack_int.h osf-share/cma_init.h \
 675 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 676 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 677 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
 678 exec.h m32r-tdep.h osabi.h gdb-events.h gdbcore.h solib-som.h \
 679 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 680 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 681 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 682 cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h cli/cli-dump.h \
 683 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 684 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 685 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 686 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 687 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 688 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 689 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 690 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 691 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 692 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 693 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 694 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 695 objfiles.h vec.h disasm.h mips-tdep.h gstdint.h ser-base.h \
 696 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 697 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 698 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 699 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 700 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 701 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 702 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 703 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 704 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 705 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 706 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 707 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 708 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 709 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 710 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 711 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 712 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 713 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 714 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 715 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 716 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 717 language.h i386-cygwin-tdep.h nbsd-tdep.h wrapper.h solib-svr4.h \
 718 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 719 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 720 regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-cygwin.h \
 721 config/i386/nm-linux64.h config/i386/nm-i386gnu.h \
 722 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 723 config/i386/nm-i386.h config/i386/nm-go32.h config/nm-nto.h \
 724 config/sparc/nm-sol2.h config/nm-linux.h config/mips/nm-irix5.h \
 725 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 726 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 727 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 728 sentinel-frame.h bcache.h symfile.h
 729
 730 # Header files that already have srcdir in them, or which are in objdir.
 731
 732 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 733
 734
 735 # GDB "info" files, which should be included in their entirety
 736 INFOFILES = gdb.info*
 737
 738 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 739
 740 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 741 # default their values the way we do for SER_HARDWIRE; in the future
 742 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 743 # variables analogous to SER_HARDWIRE which get defaulted in this
 744 # Makefile.in
 745
 746 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 747            $(REMOTE_OBS) $(SIM_OBS)
 748
 749 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 750 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 751 # and it's more useful to see it in the .y file.
 752 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 753         $(CONFIG_SRCS)
 754 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 755
 756 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 757         version.o \
 758         annotate.o \
 759         addrmap.o \
 760         auxv.o \
 761         bfd-target.o \
 762         blockframe.o breakpoint.o findvar.o regcache.o \
 763         charset.o disasm.o dummy-frame.o dfp.o \
 764         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 765         block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
 766         infcall.o \
 767         infcmd.o infrun.o \
 768         expprint.o environ.o stack.o thread.o \
 769         exceptions.o \
 770         inf-child.o \
 771         interps.o \
 772         main.o \
 773         macrotab.o macrocmd.o macroexp.o macroscope.o \
 774         event-loop.o event-top.o inf-loop.o completer.o \
 775         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 776         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 777         findcmd.o \
 778         std-regs.o \
 779         signals.o \
 780         exec.o bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 781         dbxread.o coffread.o coff-pe-read.o \
 782         dwarf2read.o mipsread.o stabsread.o corefile.o \
 783         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 784         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 785         ui-out.o cli-out.o \
 786         varobj.o vec.o wrapper.o \
 787         jv-lang.o jv-valprint.o jv-typeprint.o \
 788         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 789         scm-exp.o scm-lang.o scm-valprint.o \
 790         sentinel-frame.o \
 791         complaints.o typeprint.o \
 792         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 793         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 794         serial.o mdebugread.o top.o utils.o \
 795         ui-file.o \
 796         user-regs.o \
 797         frame.o frame-unwind.o doublest.o \
 798         frame-base.o \
 799         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 800         cp-namespace.o \
 801         reggroups.o regset.o \
 802         trad-frame.o \
 803         tramp-frame.o \
 804         solib.o solib-null.o \
 805         prologue-value.o memory-map.o xml-support.o \
 806         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o
 807
 808 TSOBS = inflow.o
 809
 810 SUBDIRS = @subdirs@
 811 CLEANDIRS = $(SUBDIRS) gnulib
 812
 813 # For now, shortcut the "configure GDB for fewer languages" stuff.
 814 YYFILES = c-exp.c \
 815         cp-name-parser.c \
 816         objc-exp.c \
 817         ada-lex.c \
 818         ada-exp.c \
 819         jv-exp.c \
 820         f-exp.c m2-exp.c p-exp.c
 821 YYOBJ = c-exp.o \
 822         cp-name-parser.o \
 823         objc-exp.o \
 824         ada-exp.o \
 825         jv-exp.o \
 826         f-exp.o m2-exp.o p-exp.o
 827
 828 # Things which need to be built when making a distribution.
 829
 830 DISTSTUFF = $(YYFILES)
 831
 832
 833 # All generated files which can be included by another file.
 834 generated_files = config.h observer.h observer.inc ada-lex.c $(GNULIB_H)
 835
 836 .c.o:
 837         $(COMPILE) $<
 838         $(POSTCOMPILE)
 839
 840 all: gdb$(EXEEXT) $(CONFIG_ALL)
 841         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 842 .PHONY: all-tui
 843 all-tui: $(TUI)$(EXEEXT)
 844
 845 installcheck:
 846
 847 # The check target can not use subdir_do, because subdir_do does not
 848 # use TARGET_FLAGS_TO_PASS.
 849 check: force
 850         @if [ -f testsuite/Makefile ]; then \
 851           rootme=`pwd`; export rootme; \
 852           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 853           cd testsuite; \
 854           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 855         else true; fi
 856
 857 # The idea is to parallelize testing of multilibs, for example:
 858 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 859 # will run 3 concurrent sessions of check, eventually testing all 10
 860 # combinations.  GNU make is required for the % pattern to work, as is
 861 # a shell that expands alternations within braces.  If GNU make is not
 862 # used, this rule will harmlessly fail to match.
 863 check//%: force
 864         @if [ -f testsuite/config.status ]; then \
 865           rootme=`pwd`; export rootme; \
 866           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 867           target=`echo "$@" | sed 's,//.*,,'`; \
 868           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 869           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 870           testdir=testsuite.$$vardots; \
 871           if [ ! -f $$testdir/Makefile ]; then \
 872             (cd testsuite && find . -name config.status) | \
 873             sed s,/config.status$$,, | sort | while read subdir; do \
 874               $(SHELL) $(srcdir)/../mkinstalldirs $$testdir/$$subdir && \
 875               (cd $$testdir/$$subdir && \
 876                $(SHELL) $$rootme/testsuite/$$subdir/config.status \
 877                  --recheck && \
 878                $(SHELL) ./config.status); done; \
 879           else :; fi && cd $$testdir && \
 880           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 881             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 882             "$$target"; \
 883         else true; fi
 884
 885 info install-info clean-info dvi pdf install-pdf html install-html: force
 886         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 887
 888 gdb.z:gdb.1
 889         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 890         pack gdb.t ; rm -f gdb.t
 891         mv gdb.t.z gdb.z
 892
 893 # Traditionally "install" depends on "all".  But it may be useful
 894 # not to; for example, if the user has made some trivial change to a
 895 # source file and doesn't care about rebuilding or just wants to save the
 896 # time it takes for make to check that all is up to date.
 897 # install-only is intended to address that need.
 898 install: all install-only
 899 install-only: $(CONFIG_INSTALL)
 900         transformed_name=`t='$(program_transform_name)'; \
 901                           echo gdb | sed -e "$$t"` ; \
 902                 if test "x$$transformed_name" = x; then \
 903                   transformed_name=gdb ; \
 904                 else \
 905                   true ; \
 906                 fi ; \
 907                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 908                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
 909                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 910                 $(SHELL) $(srcdir)/../mkinstalldirs \
 911                         $(DESTDIR)$(man1dir) ; \
 912                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 913                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 914         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 915 .PHONY: install-tui
 916 install-tui:
 917         transformed_name=`t='$(program_transform_name)'; \
 918                           echo $(TUI) | sed -e "$$t"` ; \
 919                 if test "x$$transformed_name" = x; then \
 920                   transformed_name=$(TUI) ; \
 921                 else \
 922                   true ; \
 923                 fi ; \
 924                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 925                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
 926                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 927                 $(SHELL) $(srcdir)/../mkinstalldirs \
 928                         $(DESTDIR)$(man1dir) ; \
 929                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 930                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 931
 932
 933 uninstall: force $(CONFIG_UNINSTALL)
 934         transformed_name=`t='$(program_transform_name)'; \
 935                           echo gdb | sed -e $$t` ; \
 936                 if test "x$$transformed_name" = x; then \
 937                   transformed_name=gdb ; \
 938                 else \
 939                   true ; \
 940                 fi ; \
 941                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 942                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 943         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 944 .PHONY: uninstall-tui
 945 uninstall-tui:
 946         transformed_name=`t='$(program_transform_name)'; \
 947                           echo $(TUI) | sed -e $$t` ; \
 948                 if test "x$$transformed_name" = x; then \
 949                   transformed_name=$(TUI) ; \
 950                 else \
 951                   true ; \
 952                 fi ; \
 953                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 954                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 955
 956 # The C++ name parser can be built standalone for testing.
 957 test-cp-name-parser.o: cp-name-parser.c
 958         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
 959         $(POSTCOMPILE)
 960
 961 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
 962         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
 963                 test-cp-name-parser.o $(LIBIBERTY)
 964
 965 # We do this by grepping through sources.  If that turns out to be too slow,
 966 # maybe we could just require every .o file to have an initialization routine
 967 # of a given name (top.o -> _initialize_top, etc.).
 968 #
 969 # Formatting conventions:  The name of the _initialize_* routines must start
 970 # in column zero, and must not be inside #if.
 971 #
 972 # Note that the set of files with init functions might change, or the names
 973 # of the functions might change, so this files needs to depend on all the
 974 # object files that will be linked into gdb.
 975
 976 # FIXME: There is a problem with this approach - init.c may force
 977 # unnecessary files to be linked in.
 978
 979 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
 980 # the first call is to _initialize_gdbtypes (implemented by explicitly
 981 # putting that function's name first in the init.l-tmp file).  This is
 982 # a hack to ensure that all the architecture dependant global
 983 # builtin_type_* variables are initialized before anything else
 984 # (per-architecture code is called in the same order that it is
 985 # registered).  The ``correct fix'' is to have all the builtin types
 986 # made part of the architecture and initialize them on-demand (using
 987 # gdbarch_data) just like everything else.  The catch is that other
 988 # modules still take the address of these builtin types forcing them
 989 # to be variables, sigh!
 990
 991 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
 992 # anchored on the first column and excludes the ``/'' character so
 993 # that it doesn't add the $(srcdir) prefix to any file that already
 994 # has an absolute path.  It turns out that $(DEC)'s True64 make
 995 # automatically adds the $(srcdir) prefixes when it encounters files
 996 # in sub-directories such as cli/ and mi/.
 997
 998 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
 999 # duplicates.  Files in the gdb/ directory can end up appearing in
1000 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1001
1002 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1003 init.c: $(INIT_FILES)
1004         @echo Making init.c
1005         @rm -f init.c-tmp init.l-tmp
1006         @touch init.c-tmp
1007         @echo gdbtypes > init.l-tmp
1008         @-LANG=c ; export LANG ; \
1009         LC_ALL=c ; export LC_ALL ; \
1010         echo $(INIT_FILES) | \
1011         tr ' ' '\012' | \
1012         sed \
1013             -e '/^gdbtypes.[co]$$/d' \
1014             -e '/^init.[co]$$/d' \
1015             -e '/xdr_ld.[co]$$/d' \
1016             -e '/xdr_ptrace.[co]$$/d' \
1017             -e '/xdr_rdb.[co]$$/d' \
1018             -e '/udr.[co]$$/d' \
1019             -e '/udip2soc.[co]$$/d' \
1020             -e '/udi2go32.[co]$$/d' \
1021             -e '/version.[co]$$/d' \
1022             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1023             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1024             -e 's/\.[co]$$/.c/' \
1025             -e 's,signals\.c,signals/signals\.c,' \
1026             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1027         while read f; do \
1028             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1029         done | \
1030         while read f; do \
1031             case " $$fs " in \
1032                 *" $$f "* ) ;; \
1033                 * ) echo $$f ; fs="$$fs $$f";; \
1034             esac; \
1035         done >> init.l-tmp
1036         @echo '/* Do not modify this file.  */' >>init.c-tmp
1037         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1038         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1039         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1040         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1041         @echo 'void' >>init.c-tmp
1042         @echo 'initialize_all_files (void)' >>init.c-tmp
1043         @echo '{' >>init.c-tmp
1044         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1045         @echo '}' >>init.c-tmp
1046         @rm init.l-tmp
1047         @mv init.c-tmp init.c
1048
1049 .PRECIOUS: init.c
1050
1051 # Removing the old gdb first works better if it is running, at least on SunOS.
1052 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1053         rm -f gdb$(EXEEXT)
1054         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1055                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1056                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1057
1058 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1059         rm -f $(TUI)$(EXEEXT)
1060         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1061                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1062                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1063
1064 # Convenience rule to handle recursion.
1065 $(LIBGNU) $(GNULIB_H): all-lib
1066 all-lib: gnulib/Makefile
1067         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1068 .PHONY: all-lib
1069
1070 # Create a library of the gdb object files and build GDB by linking
1071 # against that.
1072 #
1073 # init.o is very important.  It pulls in the rest of GDB.
1074 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1075 libgdb.a: $(LIBGDB_OBS)
1076         -rm -f libgdb.a
1077         $(AR) q libgdb.a $(LIBGDB_OBS)
1078         $(RANLIB) libgdb.a
1079
1080 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1081 # on itself without copying the executable.  So "make gdb1" will make
1082 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1083 # Removing gdb1 before the copy is the right thing if gdb1 is open
1084 # in another process.
1085 gdb1$(EXEEXT): gdb$(EXEEXT)
1086         rm -f gdb1$(EXEEXT)
1087         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1088
1089 # Put the proper machine-specific files first, so M-. on a machine
1090 # specific routine gets the one for the correct machine.  (FIXME: those
1091 # files go in twice; we should be removing them from the main list).
1092
1093 # TAGS depends on all the files that go into it so you can rebuild TAGS
1094 # with `make TAGS' and not have to say `rm TAGS' first.
1095
1096 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1097         @echo Making TAGS
1098         @etags $(srcdir)/$(NAT_FILE) \
1099         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1100                 echo $(srcdir)/$$i ; \
1101         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1102                 echo $$i ; \
1103         done) | sed -e 's/\.o$$/\.c/'` \
1104         `find $(srcdir)/config -name '*.h' -print`
1105
1106 tags: TAGS
1107
1108 clean mostlyclean: $(CONFIG_CLEAN)
1109         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1110         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1111         rm -f init.c version.c
1112         rm -f gdb$(EXEEXT) core make.log
1113         rm -f gdb[0-9]$(EXEEXT)
1114         rm -f test-cp-name-parser$(EXEEXT)
1115         rm -f xml-builtin.c stamp-xml
1116
1117 .PHONY: clean-tui
1118 clean-tui:
1119         rm -f $(TUI)$(EXEEXT)
1120
1121 # This used to depend on c-exp.c m2-exp.c TAGS
1122 # I believe this is wrong; the makefile standards for distclean just
1123 # describe removing files; the only sort of "re-create a distribution"
1124 # functionality described is if the distributed files are unmodified.
1125 # NB: While GDBSERVER might be configured on native systems, it isn't
1126 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1127 distclean: clean
1128         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1129         rm -f gdbserver/config.status gdbserver/config.log
1130         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1131         rm -f gdbserver/Makefile gdbserver/config.cache
1132         rm -f nm.h config.status config.h stamp-h .gdbinit
1133         rm -f y.output yacc.acts yacc.tmp y.tab.h
1134         rm -f config.log config.cache
1135         rm -f Makefile
1136         rm -rf $(DEPDIR)
1137
1138 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1139 realclean: maintainer-clean
1140
1141 local-maintainer-clean:
1142         @echo "This command is intended for maintainers to use;"
1143         @echo "it deletes files that may require special tools to rebuild."
1144         rm -f c-exp.c \
1145                 cp-name-parser.c \
1146                 ada-lex.c ada-exp.c \
1147                 objc-exp.c \
1148                 jv-exp.tab \
1149                 f-exp.c m2-exp.c p-exp.c
1150         rm -f TAGS $(INFOFILES)
1151         rm -f $(YYFILES)
1152         rm -f nm.h config.status
1153
1154 do-maintainer-clean:
1155         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1156                 subdir_do
1157
1158 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1159         cd doc; $(MAKE) $(MFLAGS) diststuff
1160
1161 subdir_do: force
1162         @for i in $(DODIRS); do \
1163                 if [ -f ./$$i/Makefile ] ; then \
1164                         if (cd ./$$i; \
1165                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1166                         else exit 1 ; fi ; \
1167                 else true ; fi ; \
1168         done
1169
1170 Makefile: Makefile.in config.status @frags@
1171         # Regenerate the Makefile and the tm.h / nm.h links.
1172         CONFIG_FILES="Makefile" \
1173           CONFIG_COMMANDS= \
1174           CONFIG_HEADERS= \
1175           $(SHELL) config.status
1176
1177 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1178         CONFIG_FILES="gnulib/Makefile" \
1179           CONFIG_COMMANDS="depfiles" \
1180           CONFIG_HEADERS= \
1181           CONFIG_LINKS= \
1182           $(SHELL) config.status
1183
1184 config.h: stamp-h ; @true
1185 stamp-h: config.in config.status
1186         CONFIG_HEADERS=config.h:config.in \
1187           CONFIG_COMMANDS=default \
1188           CONFIG_FILES= \
1189           CONFIG_LINKS= \
1190           $(SHELL) config.status
1191
1192 config.status: configure configure.tgt configure.host
1193         $(SHELL) config.status --recheck
1194
1195 force:
1196
1197 # Documentation!
1198 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1199 doc/refcard.dvi:
1200         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1201
1202 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1203 doc/refcard.ps:
1204         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1205
1206 # GDB MANUAL: TeX dvi file
1207 doc/gdb.dvi:
1208         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1209
1210 # GDB MANUAL: info file
1211 doc/gdb.info:
1212         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1213
1214 # Make copying.c from COPYING
1215 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1216         awk -f $(srcdir)/copying.awk \
1217                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1218         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1219
1220 version.c: Makefile version.in
1221         rm -f version.c-tmp version.c
1222         echo '#include "version.h"' >> version.c-tmp
1223         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1224         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1225         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1226         mv version.c-tmp version.c
1227
1228 observer.h: observer.sh doc/observer.texi
1229         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1230
1231 observer.inc: observer.sh doc/observer.texi
1232         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1233
1234 lint: $(LINTFILES)
1235         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1236            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1237
1238 gdb.cxref: $(SFILES)
1239         cxref -I. $(SFILES) >gdb.cxref
1240
1241 force_update:
1242
1243 # GNU Make has an annoying habit of putting *all* the Makefile variables
1244 # into the environment, unless you include this target as a circumvention.
1245 # Rumor is that this will be fixed (and this target can be removed)
1246 # in GNU Make 4.0.
1247 .NOEXPORT:
1248
1249 # GNU Make 3.63 has a different problem: it keeps tacking command line
1250 # overrides onto the definition of $(MAKE).  This variable setting
1251 # will remove them.
1252 MAKEOVERRIDES=
1253
1254 ALLDEPFILES = \
1255         aix-thread.c \
1256         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1257         alpha-tdep.c alpha-mdebug-tdep.c \
1258         alpha-linux-tdep.c alpha-osf1-tdep.c \
1259         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1260         amd64-nat.c amd64-tdep.c \
1261         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1262         amd64nbsd-nat.c amd64nbsd-tdep.c \
1263         amd64obsd-nat.c amd64obsd-tdep.c \
1264         amd64-linux-nat.c amd64-linux-tdep.c \
1265         amd64-sol2-tdep.c \
1266         arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1267         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1268         avr-tdep.c \
1269         bsd-uthread.c bsd-kvm.c \
1270         core-regset.c corelow.c \
1271         dcache.c exec.c \
1272         fbsd-nat.c \
1273         fork-child.c \
1274         glibc-tdep.c \
1275         go32-nat.c h8300-tdep.c \
1276         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1277         hppa-linux-tdep.c hppa-linux-nat.c \
1278         hppabsd-nat.c hppabsd-tdep.c \
1279         hppaobsd-tdep.c \
1280         hppanbsd-nat.c hppanbsd-tdep.c \
1281         i386-tdep.c i386-linux-nat.c \
1282         i386v4-nat.c i386-cygwin-tdep.c \
1283         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1284         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1285         i387-tdep.c \
1286         i386-dicos-tdep.c \
1287         i386-linux-tdep.c i386-nat.c \
1288         i386-sol2-nat.c i386-sol2-tdep.c \
1289         i386gnu-nat.c i386gnu-tdep.c \
1290         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1291         inf-ptrace.c inf-ttrace.c \
1292         irix5-nat.c \
1293         libunwind-frame.c \
1294         linux-fork.c \
1295         m68hc11-tdep.c \
1296         m32r-tdep.c \
1297         m32r-linux-nat.c m32r-linux-tdep.c \
1298         m68k-tdep.c \
1299         m68kbsd-nat.c m68kbsd-tdep.c \
1300         m68klinux-nat.c m68klinux-tdep.c \
1301         m88k-tdep.c m88kbsd-nat.c \
1302         mingw-hdep.c \
1303         mips-linux-nat.c mips-linux-tdep.c \
1304         mips-irix-tdep.c \
1305         mips-tdep.c \
1306         mipsnbsd-nat.c mipsnbsd-tdep.c \
1307         mips64obsd-nat.c mips64obsd-tdep.c \
1308         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1309         solib-osf.c \
1310         solib-target.c \
1311         somread.c solib-som.c \
1312         posix-hdep.c \
1313         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1314         ppcnbsd-nat.c ppcnbsd-tdep.c \
1315         ppcobsd-nat.c ppcobsd-tdep.c \
1316         procfs.c \
1317         remote-m32r-sdi.c remote-mips.c \
1318         remote-sim.c \
1319         dcache.c \
1320         rs6000-nat.c rs6000-tdep.c \
1321         s390-tdep.c s390-nat.c \
1322         score-tdep.c \
1323         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1324         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1325         sol2-tdep.c \
1326         solib-irix.c solib-svr4.c solib-sunos.c \
1327         sparc-linux-nat.c \
1328         sparc-linux-tdep.c sparc-nat.c sparc-sol2-nat.c sparc-sol2-tdep.c \
1329         sparc-tdep.c sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-linux-nat.c \
1330         sparc64-linux-tdep.c sparc64-nat.c sparc64-sol2-tdep.c \
1331         sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1332         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1333         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1334         spu-linux-nat.c spu-tdep.c \
1335         v850-tdep.c \
1336         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1337         win32-nat.c \
1338         xcoffread.c xcoffsolib.c \
1339         xstormy16-tdep.c \
1340         xtensa-tdep.c xtensa-config.c \
1341         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1342
1343 # Some files need explicit build rules (due to -Werror problems) or due
1344 # to sub-directory fun 'n' games.
1345
1346 hpux-thread.o: $(srcdir)/hpux-thread.c
1347         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1348                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1349         $(POSTCOMPILE)
1350
1351 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1352 main.o: $(srcdir)/main.c
1353         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1354         $(POSTCOMPILE)
1355
1356 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1357 # errors.  It turns out that that is the least of monitor.c's
1358 # problems.  The function print_vsprintf appears to be using
1359 # va_arg(long) to extract CORE_ADDR parameters - something that
1360 # definitly will not work.  "monitor.c" needs to be rewritten so that
1361 # it doesn't use format strings and instead uses callbacks.
1362 monitor.o: $(srcdir)/monitor.c
1363         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1364         $(POSTCOMPILE)
1365
1366 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1367 # checks format strings.
1368 printcmd.o: $(srcdir)/printcmd.c
1369         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1370                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1371         $(POSTCOMPILE)
1372
1373 # FIXME: Procfs.o gets -Wformat errors because things like pid_t don't
1374 # match output format strings.
1375 procfs.o: $(srcdir)/procfs.c
1376         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/procfs.c
1377         $(POSTCOMPILE)
1378
1379 # Message files.  Based on code in gcc/Makefile.in.
1380
1381 # Rules for generating translated message descriptions.  Disabled by
1382 # autoconf if the tools are not available.
1383
1384 .SUFFIXES: .po .gmo .pox .pot
1385 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1386
1387 all-po: $(CATALOGS)
1388
1389 # This notation should be acceptable to all Make implementations used
1390 # by people who are interested in updating .po files.
1391 update-po: $(CATALOGS:.gmo=.pox)
1392
1393 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1394 # script does that.
1395 .po.gmo:
1396         -test -d po || mkdir po
1397         $(GMSGFMT) --statistics -o $@ $<
1398
1399 # The new .po has to be gone over by hand, so we deposit it into
1400 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1401 # exists, use it (it was just created), else use the one in srcdir.
1402 .po.pox:
1403         -test -d po || mkdir po
1404         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1405                         then echo po/$(PACKAGE).pot; \
1406                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1407
1408 # This rule has to look for .gmo modules in both srcdir and the cwd,
1409 # and has to check that we actually have a catalog for each language,
1410 # in case they weren't built or included with the distribution.
1411 install-po:
1412         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1413         cats="$(CATALOGS)"; for cat in $$cats; do \
1414           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1415           if [ -f $$cat ]; then :; \
1416           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1417           else continue; \
1418           fi; \
1419           dir=$(localedir)/$$lang/LC_MESSAGES; \
1420           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1421           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1422           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1423           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1424         done
1425 uninstall-po:
1426         cats="$(CATALOGS)"; for cat in $$cats; do \
1427           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1428           if [ -f $$cat ]; then :; \
1429           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1430           else continue; \
1431           fi; \
1432           dir=$(localedir)/$$lang/LC_MESSAGES; \
1433           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1434         done
1435 # Delete po/*.gmo only if we are not building in the source directory.
1436 clean-po:
1437         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1438
1439 # Rule for regenerating the message template (gdb.pot).  Instead of
1440 # forcing everyone to edit POTFILES.in, which proved impractical, this
1441 # rule has no dependencies and always regenerates gdb.pot.  This is
1442 # relatively harmless since the .po files do not directly depend on
1443 # it.  The .pot file is left in the build directory.  Since GDB's
1444 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1445 # files) force this rule.
1446 $(PACKAGE).pot: po/$(PACKAGE).pot
1447 po/$(PACKAGE).pot: force
1448         -test -d po || mkdir po
1449         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1450
1451
1452 #
1453 # YACC/LEX dependencies
1454 #
1455 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1456 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1457 # said LANG-exp.c rather than ./c-exp.c some makes would
1458 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1459 # decls for malloc/realloc/free which conflict with everything else.
1460 # Strictly speaking c-exp.c should therefore depend on
1461 # Makefile.in, but that was a pretty big annoyance.
1462
1463 .SUFFIXES: .y .l
1464 .y.c:
1465         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1466         -sed -e '/extern.*malloc/d' \
1467              -e '/extern.*realloc/d' \
1468              -e '/extern.*free/d' \
1469              -e '/include.*malloc.h/d' \
1470              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1471              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1472              -e '/^#line.*y.tab.c/d' \
1473           < $@.tmp > $@.new
1474         -rm $@.tmp
1475         mv $@.new ./$*.c
1476 .l.c:
1477         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1478             $(FLEX) -o$@ $< && \
1479             rm -f $@.new && \
1480             sed -e '/extern.*malloc/d' \
1481                 -e '/extern.*realloc/d' \
1482                 -e '/extern.*free/d' \
1483                 -e '/include.*malloc.h/d' \
1484                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1485                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1486                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1487               < $@ > $@.new && \
1488             rm -f $@ && \
1489             mv $@.new $@; \
1490         elif [ -f $@ ]; then \
1491             echo "Warning: $*.c older than $*.l and flex not available."; \
1492         else \
1493             echo "$@ missing and flex not available."; \
1494             false; \
1495         fi
1496
1497 .PRECIOUS: ada-exp.c ada-lex.c
1498 .PRECIOUS: c-exp.c
1499 .PRECIOUS: f-exp.c
1500 .PRECIOUS: jv-exp.c
1501 .PRECIOUS: m2-exp.c
1502 .PRECIOUS: objc-exp.c
1503 .PRECIOUS: p-exp.c
1504
1505 # XML rules
1506
1507 xml-builtin.c: stamp-xml; @true
1508 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1509         rm -f xml-builtin.tmp
1510         AWK="$(AWK)" \
1511           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1512           xml-builtin.tmp $(XMLFILES)
1513         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1514         echo stamp > stamp-xml
1515
1516 .PRECIOUS: xml-builtin.c
1517
1518 #
1519 # gdb/cli/ dependencies
1520 #
1521 # Need to explicitly specify the compile rule as make will do nothing
1522 # or try to compile the object file into the sub-directory.
1523
1524 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1525         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1526         $(POSTCOMPILE)
1527
1528 cli-decode.o: $(srcdir)/cli/cli-decode.c
1529         $(COMPILE) $(srcdir)/cli/cli-decode.c
1530         $(POSTCOMPILE)
1531
1532 cli-dump.o: $(srcdir)/cli/cli-dump.c
1533         $(COMPILE) $(srcdir)/cli/cli-dump.c
1534         $(POSTCOMPILE)
1535
1536 cli-interp.o: $(srcdir)/cli/cli-interp.c
1537         $(COMPILE) $(srcdir)/cli/cli-interp.c
1538         $(POSTCOMPILE)
1539
1540 cli-logging.o: $(srcdir)/cli/cli-logging.c
1541         $(COMPILE) $(srcdir)/cli/cli-logging.c
1542         $(POSTCOMPILE)
1543
1544 cli-script.o: $(srcdir)/cli/cli-script.c
1545         $(COMPILE) $(srcdir)/cli/cli-script.c
1546         $(POSTCOMPILE)
1547
1548 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1549         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1550         $(POSTCOMPILE)
1551
1552 cli-utils.o: $(srcdir)/cli/cli-utils.c
1553         $(COMPILE) $(srcdir)/cli/cli-utils.c
1554         $(POSTCOMPILE)
1555
1556
1557 #
1558 # GDBTK sub-directory
1559 #
1560 # Need to explicitly specify the compile rule as make will do nothing
1561 # or try to compile the object file into the mi directory.
1562
1563 all-gdbtk: insight$(EXEEXT)
1564
1565 install-gdbtk:
1566         transformed_name=`t='$(program_transform_name)'; \
1567                   echo insight | sed -e $$t` ; \
1568         if test "x$$transformed_name" = x; then \
1569           transformed_name=insight ; \
1570         else \
1571           true ; \
1572         fi ; \
1573         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1574         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1575                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1576         $(SHELL) $(srcdir)/../mkinstalldirs \
1577                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1578         $(SHELL) $(srcdir)/../mkinstalldirs \
1579                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1580         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1581                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1582         $(SHELL) $(srcdir)/../mkinstalldirs \
1583                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1584                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1585         $(SHELL) $(srcdir)/../mkinstalldirs \
1586                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1587                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1588                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1589         cd $(srcdir)/gdbtk/library ; \
1590         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1591           do \
1592                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1593           done ;
1594
1595 uninstall-gdbtk:
1596         transformed_name=`t='$(program_transform_name)'; \
1597                   echo insight | sed -e $$t` ; \
1598         if test "x$$transformed_name" = x; then \
1599                 transformed_name=insight ; \
1600         else \
1601                 true ; \
1602         fi ; \
1603         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1604         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1605
1606 clean-gdbtk:
1607         rm -f insight$(EXEEXT)
1608
1609 # Removing the old gdb first works better if it is running, at least on SunOS.
1610 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1611                 $(CDEPS) $(TDEPLIBS)
1612         rm -f insight$(EXEEXT)
1613         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1614                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1615                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1616
1617 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1618         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1619
1620 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1621                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1622                 $(GDBTK_CFLAGS) \
1623                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1624                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1625
1626 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1627         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1628         $(POSTCOMPILE)
1629
1630 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1631         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1632         $(POSTCOMPILE)
1633
1634 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1635         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1636         $(POSTCOMPILE)
1637
1638 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1639         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1640         $(POSTCOMPILE)
1641
1642 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1643         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1644         $(POSTCOMPILE)
1645
1646 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1647         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1648         $(POSTCOMPILE)
1649
1650 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1651         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1652         $(POSTCOMPILE)
1653
1654 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1655         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1656         $(POSTCOMPILE)
1657
1658 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1659         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1660         $(POSTCOMPILE)
1661
1662 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1663         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1664         $(POSTCOMPILE)
1665
1666
1667 #
1668 # gdb/mi/ dependencies
1669 #
1670 # Need to explicitly specify the compile rule as make will do nothing
1671 # or try to compile the object file into the sub-directory.
1672
1673 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1674         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1675         $(POSTCOMPILE)
1676
1677 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1678         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1679         $(POSTCOMPILE)
1680
1681 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1682         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1683         $(POSTCOMPILE)
1684
1685 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1686         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1687         $(POSTCOMPILE)
1688
1689 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1690         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1691         $(POSTCOMPILE)
1692
1693 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1694         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1695         $(POSTCOMPILE)
1696
1697 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1698         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1699         $(POSTCOMPILE)
1700
1701 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1702         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1703         $(POSTCOMPILE)
1704
1705 mi-console.o: $(srcdir)/mi/mi-console.c
1706         $(COMPILE) $(srcdir)/mi/mi-console.c
1707         $(POSTCOMPILE)
1708
1709 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1710         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1711         $(POSTCOMPILE)
1712
1713 mi-interp.o: $(srcdir)/mi/mi-interp.c
1714         $(COMPILE) $(srcdir)/mi/mi-interp.c
1715         $(POSTCOMPILE)
1716
1717 mi-main.o: $(srcdir)/mi/mi-main.c
1718         $(COMPILE) $(srcdir)/mi/mi-main.c
1719         $(POSTCOMPILE)
1720
1721 mi-out.o: $(srcdir)/mi/mi-out.c
1722         $(COMPILE) $(srcdir)/mi/mi-out.c
1723         $(POSTCOMPILE)
1724
1725 mi-parse.o: $(srcdir)/mi/mi-parse.c
1726         $(COMPILE) $(srcdir)/mi/mi-parse.c
1727         $(POSTCOMPILE)
1728
1729 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1730         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1731         $(POSTCOMPILE)
1732
1733 mi-common.o: $(srcdir)/mi/mi-common.c
1734         $(COMPILE) $(srcdir)/mi/mi-common.c
1735         $(POSTCOMPILE)
1736
1737 #
1738 # gdb/signals/ dependencies
1739 #
1740 # Need to explicitly specify the compile rule as make will do nothing
1741 # or try to compile the object file into the sub-directory.
1742
1743 signals.o: $(srcdir)/signals/signals.c
1744         $(COMPILE) $(srcdir)/signals/signals.c
1745         $(POSTCOMPILE)
1746
1747 #
1748 # gdb/tui/ dependencies
1749 #
1750 # Need to explicitly specify the compile rule as make will do nothing
1751 # or try to compile the object file into the sub-directory.
1752
1753 tui.o: $(srcdir)/tui/tui.c
1754         $(COMPILE) $(srcdir)/tui/tui.c
1755         $(POSTCOMPILE)
1756
1757 tui-command.o: $(srcdir)/tui/tui-command.c
1758         $(COMPILE) $(srcdir)/tui/tui-command.c
1759         $(POSTCOMPILE)
1760
1761 tui-data.o: $(srcdir)/tui/tui-data.c
1762         $(COMPILE) $(srcdir)/tui/tui-data.c
1763         $(POSTCOMPILE)
1764
1765 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1766         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1767         $(POSTCOMPILE)
1768
1769 tui-file.o: $(srcdir)/tui/tui-file.c
1770         $(COMPILE) $(srcdir)/tui/tui-file.c
1771         $(POSTCOMPILE)
1772
1773 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1774         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1775         $(POSTCOMPILE)
1776
1777 tui-interp.o: $(srcdir)/tui/tui-interp.c
1778         $(COMPILE) $(srcdir)/tui/tui-interp.c
1779         $(POSTCOMPILE)
1780
1781 tui-io.o: $(srcdir)/tui/tui-io.c
1782         $(COMPILE) $(srcdir)/tui/tui-io.c
1783         $(POSTCOMPILE)
1784
1785 tui-layout.o: $(srcdir)/tui/tui-layout.c
1786         $(COMPILE) $(srcdir)/tui/tui-layout.c
1787         $(POSTCOMPILE)
1788
1789 tui-main.o: $(srcdir)/tui/tui-main.c
1790         $(COMPILE) $(srcdir)/tui/tui-main.c
1791         $(POSTCOMPILE)
1792
1793 tui-out.o: $(srcdir)/tui/tui-out.c
1794         $(COMPILE) $(srcdir)/tui/tui-out.c
1795         $(POSTCOMPILE)
1796
1797 tui-regs.o: $(srcdir)/tui/tui-regs.c
1798         $(COMPILE) $(srcdir)/tui/tui-regs.c
1799         $(POSTCOMPILE)
1800
1801 tui-source.o: $(srcdir)/tui/tui-source.c
1802         $(COMPILE) $(srcdir)/tui/tui-source.c
1803         $(POSTCOMPILE)
1804
1805 tui-stack.o: $(srcdir)/tui/tui-stack.c
1806         $(COMPILE) $(srcdir)/tui/tui-stack.c
1807         $(POSTCOMPILE)
1808
1809 tui-win.o: $(srcdir)/tui/tui-win.c
1810         $(COMPILE) $(srcdir)/tui/tui-win.c
1811         $(POSTCOMPILE)
1812
1813 tui-windata.o: $(srcdir)/tui/tui-windata.c
1814         $(COMPILE) $(srcdir)/tui/tui-windata.c
1815         $(POSTCOMPILE)
1816
1817 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1818         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1819         $(POSTCOMPILE)
1820
1821 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1822         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1823         $(POSTCOMPILE)
1824
1825 #
1826 # gdb/python/ dependencies
1827 #
1828 # Need to explicitly specify the compile rule as make will do nothing
1829 # or try to compile the object file into the sub-directory.
1830
1831 # Flags needed to compile Python code
1832 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1833
1834 python.o: $(srcdir)/python/python.c
1835         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1836         $(POSTCOMPILE)
1837
1838 python-utils.o: $(srcdir)/python/python-utils.c
1839         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-utils.c
1840         $(POSTCOMPILE)
1841
1842 \f
1843
1844 #
1845 # Dependency tracking.  Most of this is conditional on GNU Make being
1846 # found by configure; if GNU Make is not found, we fall back to a
1847 # simpler scheme.
1848 #
1849
1850 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
1851 # Note that we put the dependencies into a .Tpo file, then move them
1852 # into place if the compile succeeds.  We need this because gcc does
1853 # not atomically write the dependency output file.
1854 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
1855 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
1856 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
1857 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
1858 @GMAKE_TRUE@else
1859 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
1860 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
1861 # depcomp handles atomicity for us, so we don't need a postcompile
1862 # step.
1863 @GMAKE_TRUE@override POSTCOMPILE =
1864 @GMAKE_TRUE@endif
1865
1866 # A list of all the objects we might care about in this build, for
1867 # dependency tracking.
1868 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
1869         test-cp-name-parser.o
1870
1871 # Ensure that generated files are created early.  Use order-only
1872 # dependencies if available.  They require GNU make 3.80 or newer,
1873 # and the .VARIABLES variable was introduced at the same time.
1874 @GMAKE_TRUE@ifdef .VARIABLES
1875 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
1876 @GMAKE_TRUE@else
1877 $(all_object_files) : $(generated_files)
1878 @GMAKE_TRUE@endif
1879
1880 # Dependencies.
1881 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
1882
1883 ### end of the gdb Makefile.in.