gdb/config/pa/tm-hppa.h

   1 /* Parameters for execution on any Hewlett-Packard PA-RISC machine.
   2    Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
   3    1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
   4
   5    Contributed by the Center for Software Science at the
   6    University of Utah (pa-gdb-bugs@cs.utah.edu).
   7
   8    This file is part of GDB.
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 59 Temple Place - Suite 330,
  23    Boston, MA 02111-1307, USA.  */
  24
  25 #include "regcache.h"
  26
  27 #define GDB_MULTI_ARCH 0
  28
  29 /* NOTE: cagney/2002-11-24: This is a guess.  */
  30 #define DEPRECATED_USE_GENERIC_DUMMY_FRAMES 0
  31 #define CALL_DUMMY_LOCATION ON_STACK
  32 #define DEPRECATED_PC_IN_CALL_DUMMY(pc, sp, frame_address) deprecated_pc_in_call_dummy_on_stack (pc, sp, frame_address)
  33 #define DEPRECATED_INIT_FRAME_PC(l,f) (init_frame_pc_default (l, f))
  34
  35 /* Forward declarations of some types we use in prototypes */
  36
  37 struct frame_info;
  38 struct frame_saved_regs;
  39 struct value;
  40 struct type;
  41 struct inferior_status;
  42
  43 /* By default assume we don't have to worry about software floating point.  */
  44 #ifndef SOFT_FLOAT
  45 #define SOFT_FLOAT 0
  46 #endif
  47
  48 /* Get at various relevent fields of an instruction word. */
  49
  50 #define MASK_5 0x1f
  51 #define MASK_11 0x7ff
  52 #define MASK_14 0x3fff
  53 #define MASK_21 0x1fffff
  54
  55 /* This macro gets bit fields using HP's numbering (MSB = 0) */
  56 #ifndef GET_FIELD
  57 #define GET_FIELD(X, FROM, TO) \
  58   ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1))
  59 #endif
  60
  61 #if !GDB_MULTI_ARCH
  62 extern int hppa_reg_struct_has_addr (int gcc_p, struct type *type);
  63 #define REG_STRUCT_HAS_ADDR(gcc_p,type) hppa_reg_struct_has_addr (gcc_p,type)
  64 #endif
  65
  66 /* Offset from address of function to start of its code.
  67    Zero on most machines.  */
  68
  69 #if !GDB_MULTI_ARCH
  70 #define FUNCTION_START_OFFSET 0
  71 #endif
  72
  73 /* Advance PC across any function entry prologue instructions
  74    to reach some "real" code.  */
  75
  76 #if !GDB_MULTI_ARCH
  77 extern CORE_ADDR hppa_skip_prologue (CORE_ADDR);
  78 #define SKIP_PROLOGUE(pc) (hppa_skip_prologue (pc))
  79 #endif
  80
  81 /* If PC is in some function-call trampoline code, return the PC
  82    where the function itself actually starts.  If not, return NULL.  */
  83
  84 #if !GDB_MULTI_ARCH
  85 #define SKIP_TRAMPOLINE_CODE(pc) hppa_skip_trampoline_code (pc)
  86 extern CORE_ADDR hppa_skip_trampoline_code (CORE_ADDR);
  87 #endif
  88
  89 /* Return non-zero if we are in an appropriate trampoline. */
  90
  91 #if !GDB_MULTI_ARCH
  92 #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \
  93    hppa_in_solib_call_trampoline (pc, name)
  94 extern int hppa_in_solib_call_trampoline (CORE_ADDR, char *);
  95 #endif
  96
  97 #if !GDB_MULTI_ARCH
  98 #define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \
  99   hppa_in_solib_return_trampoline (pc, name)
 100 extern int hppa_in_solib_return_trampoline (CORE_ADDR, char *);
 101 #endif
 102
 103 #if !GDB_MULTI_ARCH
 104 #undef  SAVED_PC_AFTER_CALL
 105 #define SAVED_PC_AFTER_CALL(frame) hppa_saved_pc_after_call (frame)
 106 extern CORE_ADDR hppa_saved_pc_after_call (struct frame_info *);
 107 #endif
 108
 109 #if !GDB_MULTI_ARCH
 110 extern int hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs);
 111 #define INNER_THAN(lhs,rhs) hppa_inner_than(lhs,rhs)
 112 #endif
 113
 114 #if !GDB_MULTI_ARCH
 115 extern CORE_ADDR hppa_stack_align (CORE_ADDR sp);
 116 #define STACK_ALIGN(sp) hppa_stack_align (sp)
 117 #endif
 118
 119 #if !GDB_MULTI_ARCH
 120 #define EXTRA_STACK_ALIGNMENT_NEEDED 0
 121 #endif
 122
 123 /* Sequence of bytes for breakpoint instruction.  */
 124
 125 #define BREAKPOINT {0x00, 0x01, 0x00, 0x04}
 126 #define BREAKPOINT32 0x10004
 127
 128 /* Amount PC must be decremented by after a breakpoint.
 129    This is often the number of bytes in BREAKPOINT
 130    but not always.
 131
 132    Not on the PA-RISC */
 133
 134 #if !GDB_MULTI_ARCH
 135 #define DECR_PC_AFTER_BREAK 0
 136 #endif
 137
 138 extern int hppa_pc_requires_run_before_use (CORE_ADDR pc);
 139 #define PC_REQUIRES_RUN_BEFORE_USE(pc) hppa_pc_requires_run_before_use (pc)
 140
 141 /* Say how long (ordinary) registers are.  This is a piece of bogosity
 142    used in push_word and a few other places; REGISTER_RAW_SIZE is the
 143    real way to know how big a register is.  */
 144
 145 #if !GDB_MULTI_ARCH
 146 #define REGISTER_SIZE 4
 147 #endif
 148
 149 /* Number of machine registers */
 150
 151 #if !GDB_MULTI_ARCH
 152 #define NUM_REGS 128
 153 #endif
 154
 155 /* Initializer for an array of names of registers.
 156    There should be NUM_REGS strings in this initializer.
 157    They are in rows of eight entries  */
 158
 159 #define REGISTER_NAMES  \
 160  {"flags",  "r1",      "rp",      "r3",    "r4",     "r5",      "r6",     "r7",    \
 161   "r8",     "r9",      "r10",     "r11",   "r12",    "r13",     "r14",    "r15",   \
 162   "r16",    "r17",     "r18",     "r19",   "r20",    "r21",     "r22",    "r23",   \
 163   "r24",    "r25",     "r26",     "dp",    "ret0",   "ret1",    "sp",     "r31",   \
 164   "sar",    "pcoqh",   "pcsqh",   "pcoqt", "pcsqt",  "eiem",    "iir",    "isr",   \
 165   "ior",    "ipsw",    "goto",    "sr4",   "sr0",    "sr1",     "sr2",    "sr3",   \
 166   "sr5",    "sr6",     "sr7",     "cr0",   "cr8",    "cr9",     "ccr",    "cr12",  \
 167   "cr13",   "cr24",    "cr25",    "cr26",  "mpsfu_high","mpsfu_low","mpsfu_ovflo","pad",\
 168   "fpsr",    "fpe1",   "fpe2",    "fpe3",  "fpe4",   "fpe5",    "fpe6",   "fpe7",  \
 169   "fr4",     "fr4R",   "fr5",     "fr5R",  "fr6",    "fr6R",    "fr7",    "fr7R",  \
 170   "fr8",     "fr8R",   "fr9",     "fr9R",  "fr10",   "fr10R",   "fr11",   "fr11R", \
 171   "fr12",    "fr12R",  "fr13",    "fr13R", "fr14",   "fr14R",   "fr15",   "fr15R", \
 172   "fr16",    "fr16R",  "fr17",    "fr17R", "fr18",   "fr18R",   "fr19",   "fr19R", \
 173   "fr20",    "fr20R",  "fr21",    "fr21R", "fr22",   "fr22R",   "fr23",   "fr23R", \
 174   "fr24",    "fr24R",  "fr25",    "fr25R", "fr26",   "fr26R",   "fr27",   "fr27R", \
 175   "fr28",    "fr28R",  "fr29",    "fr29R", "fr30",   "fr30R",   "fr31",   "fr31R"}
 176
 177 /* Register numbers of various important registers.
 178    Note that some of these values are "real" register numbers,
 179    and correspond to the general registers of the machine,
 180    and some are "phony" register numbers which are too large
 181    to be actual register numbers as far as the user is concerned
 182    but do serve to get the desired values when passed to read_register.  */
 183
 184 #define R0_REGNUM 0             /* Doesn't actually exist, used as base for
 185                                    other r registers.  */
 186 #define FLAGS_REGNUM 0          /* Various status flags */
 187 #define RP_REGNUM 2             /* return pointer */
 188 #if !GDB_MULTI_ARCH
 189 #define FP_REGNUM 3             /* Contains address of executing stack */
 190                                 /* frame */
 191 #endif
 192 #if !GDB_MULTI_ARCH
 193 #define SP_REGNUM 30            /* Contains address of top of stack */
 194 #endif
 195 #define SAR_REGNUM 32           /* Shift Amount Register */
 196 #define IPSW_REGNUM 41          /* Interrupt Processor Status Word */
 197 #define PCOQ_HEAD_REGNUM 33     /* instruction offset queue head */
 198 #define PCSQ_HEAD_REGNUM 34     /* instruction space queue head */
 199 #define PCOQ_TAIL_REGNUM 35     /* instruction offset queue tail */
 200 #define PCSQ_TAIL_REGNUM 36     /* instruction space queue tail */
 201 #define EIEM_REGNUM 37          /* External Interrupt Enable Mask */
 202 #define IIR_REGNUM 38           /* Interrupt Instruction Register */
 203 #define IOR_REGNUM 40           /* Interrupt Offset Register */
 204 #define SR4_REGNUM 43           /* space register 4 */
 205 #define RCR_REGNUM 51           /* Recover Counter (also known as cr0) */
 206 #define CCR_REGNUM 54           /* Coprocessor Configuration Register */
 207 #define TR0_REGNUM 57           /* Temporary Registers (cr24 -> cr31) */
 208 #define CR27_REGNUM 60          /* Base register for thread-local storage, cr27 */
 209 #if !GDB_MULTI_ARCH
 210 #define FP0_REGNUM 64           /* floating point reg. 0 (fspr) */
 211 #endif
 212 #define FP4_REGNUM 72
 213
 214 #define ARG0_REGNUM 26          /* The first argument of a callee. */
 215 #define ARG1_REGNUM 25          /* The second argument of a callee. */
 216 #define ARG2_REGNUM 24          /* The third argument of a callee. */
 217 #define ARG3_REGNUM 23          /* The fourth argument of a callee. */
 218
 219 /* compatibility with the rest of gdb. */
 220 #if !GDB_MULTI_ARCH
 221 #define PC_REGNUM PCOQ_HEAD_REGNUM
 222 #endif
 223 #if !GDB_MULTI_ARCH
 224 #define NPC_REGNUM PCOQ_TAIL_REGNUM
 225 #endif
 226
 227 /*
 228  * Processor Status Word Masks
 229  */
 230
 231 #define PSW_T   0x01000000      /* Taken Branch Trap Enable */
 232 #define PSW_H   0x00800000      /* Higher-Privilege Transfer Trap Enable */
 233 #define PSW_L   0x00400000      /* Lower-Privilege Transfer Trap Enable */
 234 #define PSW_N   0x00200000      /* PC Queue Front Instruction Nullified */
 235 #define PSW_X   0x00100000      /* Data Memory Break Disable */
 236 #define PSW_B   0x00080000      /* Taken Branch in Previous Cycle */
 237 #define PSW_C   0x00040000      /* Code Address Translation Enable */
 238 #define PSW_V   0x00020000      /* Divide Step Correction */
 239 #define PSW_M   0x00010000      /* High-Priority Machine Check Disable */
 240 #define PSW_CB  0x0000ff00      /* Carry/Borrow Bits */
 241 #define PSW_R   0x00000010      /* Recovery Counter Enable */
 242 #define PSW_Q   0x00000008      /* Interruption State Collection Enable */
 243 #define PSW_P   0x00000004      /* Protection ID Validation Enable */
 244 #define PSW_D   0x00000002      /* Data Address Translation Enable */
 245 #define PSW_I   0x00000001      /* External, Power Failure, Low-Priority */
 246                                 /* Machine Check Interruption Enable */
 247
 248 /* When fetching register values from an inferior or a core file,
 249    clean them up using this macro.  BUF is a char pointer to
 250    the raw value of the register in the registers[] array.  */
 251
 252 #define DEPRECATED_CLEAN_UP_REGISTER_VALUE(regno, buf) \
 253   do {  \
 254     if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \
 255       (buf)[sizeof(CORE_ADDR) -1] &= ~0x3; \
 256   } while (0)
 257
 258 /* Define DEPRECATED_DO_REGISTERS_INFO() to do machine-specific
 259    formatting of register dumps. */
 260
 261 #define DEPRECATED_DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp)
 262 extern void pa_do_registers_info (int, int);
 263
 264 #if 0
 265 #define STRCAT_REGISTER(regnum, fpregs, stream, precision) pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
 266 extern void pa_do_strcat_registers_info (int, int, struct ui_file *, enum precision_type);
 267 #endif
 268
 269 /* PA specific macro to see if the current instruction is nullified. */
 270 #ifndef INSTRUCTION_NULLIFIED
 271 extern int hppa_instruction_nullified (void);
 272 #define INSTRUCTION_NULLIFIED hppa_instruction_nullified ()
 273 #endif
 274
 275 /* Number of bytes of storage in the actual machine representation
 276    for register N.  On the PA-RISC, all regs are 4 bytes, including
 277    the FP registers (they're accessed as two 4 byte halves).  */
 278
 279 #if !GDB_MULTI_ARCH
 280 extern int hppa_register_raw_size (int reg_nr);
 281 #define REGISTER_RAW_SIZE(N) hppa_register_raw_size (N)
 282 #endif
 283
 284 /* Total amount of space needed to store our copies of the machine's
 285    register state, the array `registers'.  */
 286 #if !GDB_MULTI_ARCH
 287 #define REGISTER_BYTES (NUM_REGS * 4)
 288 #endif
 289
 290 #if !GDB_MULTI_ARCH
 291 extern int hppa_register_byte (int reg_nr);
 292 #define REGISTER_BYTE(N) hppa_register_byte (N)
 293 #endif
 294
 295 /* Number of bytes of storage in the program's representation
 296    for register N. */
 297
 298 #if !GDB_MULTI_ARCH
 299 #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
 300 #endif
 301
 302 /* Largest value REGISTER_RAW_SIZE can have.  */
 303
 304 #if !GDB_MULTI_ARCH
 305 #define MAX_REGISTER_RAW_SIZE 4
 306 #endif
 307
 308 /* Largest value REGISTER_VIRTUAL_SIZE can have.  */
 309
 310 #if !GDB_MULTI_ARCH
 311 #define MAX_REGISTER_VIRTUAL_SIZE 8
 312 #endif
 313
 314 #if !GDB_MULTI_ARCH
 315 extern struct type * hppa_register_virtual_type (int reg_nr);
 316 #define REGISTER_VIRTUAL_TYPE(N) hppa_register_virtual_type (N)
 317 #endif
 318
 319 #if !GDB_MULTI_ARCH
 320 extern void hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp);
 321 #define STORE_STRUCT_RETURN(ADDR, SP) hppa_store_struct_return (ADDR, SP)
 322 #endif
 323
 324 /* Extract from an array REGBUF containing the (raw) register state
 325    a function return value of type TYPE, and copy that, in virtual format,
 326    into VALBUF.  */
 327
 328 #if !GDB_MULTI_ARCH
 329 void hppa_extract_return_value (struct type *type, char *regbuf, char *valbuf);
 330 #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
 331   hppa_extract_return_value (TYPE, REGBUF, VALBUF);
 332 #endif
 333
 334  /* elz: decide whether the function returning a value of type type
 335     will put it on the stack or in the registers.
 336     The pa calling convention says that:
 337     register 28 (called ret0 by gdb) contains any ASCII char,
 338     and any non_floating point value up to 32-bits.
 339     reg 28 and 29 contain non-floating point up tp 64 bits and larger
 340     than 32 bits. (higer order word in reg 28).
 341     fr4: floating point up to 64 bits
 342     sr1: space identifier (32-bit)
 343     stack: any lager than 64-bit, with the address in r28
 344   */
 345 #if !GDB_MULTI_ARCH
 346 extern use_struct_convention_fn hppa_use_struct_convention;
 347 #define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type)
 348 #endif
 349
 350 /* Write into appropriate registers a function return value
 351    of type TYPE, given in virtual format.  */
 352
 353 #if !GDB_MULTI_ARCH
 354 extern void hppa_store_return_value (struct type *type, char *valbuf);
 355 #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) \
 356   hppa_store_return_value (TYPE, VALBUF);
 357 #endif
 358
 359 #if !GDB_MULTI_ARCH
 360 extern CORE_ADDR hppa_extract_struct_value_address (char *regbuf);
 361 #define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
 362   hppa_extract_struct_value_address (REGBUF)
 363 #endif
 364
 365 /* elz: Return a large value, which is stored on the stack at addr.
 366    This is defined only for the hppa, at this moment.  The above macro
 367    DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore,
 368    because it assumes that on exit from a called function which
 369    returns a large structure on the stack, the address of the ret
 370    structure is still in register 28. Unfortunately this register is
 371    usually overwritten by the called function itself, on hppa. This is
 372    specified in the calling convention doc. As far as I know, the only
 373    way to get the return value is to have the caller tell us where it
 374    told the callee to put it, rather than have the callee tell us.  */
 375 struct value *hppa_value_returned_from_stack (register struct type *valtype,
 376                                               CORE_ADDR addr);
 377 #define VALUE_RETURNED_FROM_STACK(valtype,addr) \
 378   hppa_value_returned_from_stack (valtype, addr)
 379
 380 #if !GDB_MULTI_ARCH
 381 extern int hppa_cannot_store_register (int regnum);
 382 #define CANNOT_STORE_REGISTER(regno) hppa_cannot_store_register (regno)
 383 #endif
 384
 385 #if !GDB_MULTI_ARCH
 386 #define DEPRECATED_INIT_EXTRA_FRAME_INFO(fromleaf, frame) hppa_init_extra_frame_info (fromleaf, frame)
 387 extern void hppa_init_extra_frame_info (int, struct frame_info *);
 388 #endif
 389
 390 /* Describe the pointer in each stack frame to the previous stack frame
 391    (its caller).  */
 392
 393 /* FRAME_CHAIN takes a frame's nominal address and produces the
 394    frame's chain-pointer.  */
 395
 396 /* In the case of the PA-RISC, the frame's nominal address
 397    is the address of a 4-byte word containing the calling frame's
 398    address (previous FP).  */
 399
 400 #if !GDB_MULTI_ARCH
 401 #define FRAME_CHAIN(thisframe) hppa_frame_chain (thisframe)
 402 extern CORE_ADDR hppa_frame_chain (struct frame_info *);
 403 #endif
 404
 405 #if !GDB_MULTI_ARCH
 406 extern int hppa_frame_chain_valid (CORE_ADDR, struct frame_info *);
 407 #define FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe)
 408 #endif
 409
 410 /* Define other aspects of the stack frame.  */
 411
 412 /* A macro that tells us whether the function invocation represented
 413    by FI does not have a frame on the stack associated with it.  If it
 414    does not, FRAMELESS is set to 1, else 0.  */
 415 #if !GDB_MULTI_ARCH
 416 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
 417   (hppa_frameless_function_invocation (FI))
 418 extern int hppa_frameless_function_invocation (struct frame_info *);
 419 #endif
 420
 421 #if !GDB_MULTI_ARCH
 422 extern CORE_ADDR hppa_frame_saved_pc (struct frame_info *frame);
 423 #define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME)
 424 #endif
 425
 426 #if !GDB_MULTI_ARCH
 427 extern CORE_ADDR hppa_frame_args_address (struct frame_info *fi);
 428 #define FRAME_ARGS_ADDRESS(fi) hppa_frame_args_address (fi)
 429 #endif
 430
 431 #if !GDB_MULTI_ARCH
 432 extern CORE_ADDR hppa_frame_locals_address (struct frame_info *fi);
 433 #define FRAME_LOCALS_ADDRESS(fi) hppa_frame_locals_address (fi)
 434 #endif
 435
 436 #if !GDB_MULTI_ARCH
 437 extern int hppa_frame_num_args (struct frame_info *frame);
 438 #define FRAME_NUM_ARGS(fi) hppa_frame_num_args (fi)
 439 #endif
 440
 441 #if !GDB_MULTI_ARCH
 442 #define FRAME_ARGS_SKIP 0
 443 #endif
 444
 445 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
 446   hppa_frame_find_saved_regs (frame_info, &frame_saved_regs)
 447 extern void hppa_frame_find_saved_regs (struct frame_info *,
 448                                         struct frame_saved_regs *);
 449 \f
 450
 451 /* Things needed for making the inferior call functions.  */
 452
 453 /* Push an empty stack frame, to record the current PC, etc. */
 454
 455 /* FIXME: brobecker 2002-12-26.  This macro definition takes advantage
 456    of the fact that DEPRECATED_PUSH_DUMMY_FRAME is called within a
 457    function where a variable inf_status of type struct inferior_status
 458    * is defined.  Ugh!  Until this is fixed, we will not be able to
 459    move to multiarch partial.  */
 460 #define DEPRECATED_PUSH_DUMMY_FRAME hppa_push_dummy_frame (inf_status)
 461 extern void hppa_push_dummy_frame (struct inferior_status *);
 462
 463 /* Discard from the stack the innermost frame,
 464    restoring all saved registers.  */
 465 #if !GDB_MULTI_ARCH
 466 #define POP_FRAME  hppa_pop_frame ()
 467 extern void hppa_pop_frame (void);
 468 #endif
 469
 470 #define INSTRUCTION_SIZE 4
 471
 472 #ifndef PA_LEVEL_0
 473
 474 /* Non-level zero PA's have space registers (but they don't always have
 475    floating-point, do they????  */
 476
 477 /* This sequence of words is the instructions
 478
 479    ; Call stack frame has already been built by gdb. Since we could be calling
 480    ; a varargs function, and we do not have the benefit of a stub to put things in
 481    ; the right place, we load the first 4 word of arguments into both the general
 482    ; and fp registers.
 483    call_dummy
 484    ldw -36(sp), arg0
 485    ldw -40(sp), arg1
 486    ldw -44(sp), arg2
 487    ldw -48(sp), arg3
 488    ldo -36(sp), r1
 489    fldws 0(0, r1), fr4
 490    fldds -4(0, r1), fr5
 491    fldws -8(0, r1), fr6
 492    fldds -12(0, r1), fr7
 493    ldil 0, r22                  ; FUNC_LDIL_OFFSET must point here
 494    ldo 0(r22), r22                      ; FUNC_LDO_OFFSET must point here
 495    ldsid (0,r22), r4
 496    ldil 0, r1                   ; SR4EXPORT_LDIL_OFFSET must point here
 497    ldo 0(r1), r1                        ; SR4EXPORT_LDO_OFFSET must point here
 498    ldsid (0,r1), r20
 499    combt,=,n r4, r20, text_space        ; If target is in data space, do a
 500    ble 0(sr5, r22)                      ; "normal" procedure call
 501    copy r31, r2
 502    break 4, 8
 503    mtsp r21, sr0
 504    ble,n 0(sr0, r22)
 505    text_space                           ; Otherwise, go through _sr4export,
 506    ble (sr4, r1)                        ; which will return back here.
 507    stw r31,-24(r30)
 508    break 4, 8
 509    mtsp r21, sr0
 510    ble,n 0(sr0, r22)
 511    nop                          ; To avoid kernel bugs
 512    nop                          ; and keep the dummy 8 byte aligned
 513
 514    The dummy decides if the target is in text space or data space. If
 515    it's in data space, there's no problem because the target can
 516    return back to the dummy. However, if the target is in text space,
 517    the dummy calls the secret, undocumented routine _sr4export, which
 518    calls a function in text space and can return to any space. Instead
 519    of including fake instructions to represent saved registers, we
 520    know that the frame is associated with the call dummy and treat it
 521    specially.
 522
 523    The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1
 524    kernels.   If the memory at the location pointed to by the PC is
 525    0xffffffff then a ptrace step call will fail (even if the instruction
 526    is nullified).
 527
 528    The code to pop a dummy frame single steps three instructions
 529    starting with the last mtsp.  This includes the nullified "instruction"
 530    following the ble (which is uninitialized junk).  If the
 531    "instruction" following the last BLE is 0xffffffff, then the ptrace
 532    will fail and the dummy frame is not correctly popped.
 533
 534    By placing a NOP in the delay slot of the BLE instruction we can be
 535    sure that we never try to execute a 0xffffffff instruction and
 536    avoid the kernel bug.  The second NOP is needed to keep the call
 537    dummy 8 byte aligned.  */
 538
 539 /* Define offsets into the call dummy for the target function address */
 540 #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9)
 541 #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10)
 542
 543 /* Define offsets into the call dummy for the _sr4export address */
 544 #define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12)
 545 #define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13)
 546
 547 #define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\
 548                     0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\
 549                     0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\
 550                     0x20200000, 0x34210000, 0x002010b4, 0x82842022,\
 551                     0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\
 552                     0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\
 553                     0x00151820, 0xe6c00002, 0x08000240, 0x08000240}
 554
 555 #if !GDB_MULTI_ARCH
 556 #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28)
 557 #endif
 558 #define REG_PARM_STACK_SPACE 16
 559
 560 #else /* defined PA_LEVEL_0 */
 561
 562 /* FIXME: brobecker 2002-12-26.  PA_LEVEL_0 is only defined for the
 563    hppa-pro target, which should be obsoleted soon.  The following
 564    section will therefore not be included in the multiarch conversion.  */
 565 /* This is the call dummy for a level 0 PA.  Level 0's don't have space
 566    registers (or floating point?), so we skip all that inter-space call stuff,
 567    and avoid touching the fp regs.
 568
 569    call_dummy
 570
 571    ldw -36(%sp), %arg0
 572    ldw -40(%sp), %arg1
 573    ldw -44(%sp), %arg2
 574    ldw -48(%sp), %arg3
 575    ldil 0, %r31                 ; FUNC_LDIL_OFFSET must point here
 576    ldo 0(%r31), %r31            ; FUNC_LDO_OFFSET must point here
 577    ble 0(%sr0, %r31)
 578    copy %r31, %r2
 579    break 4, 8
 580    nop                          ; restore_pc_queue expects these
 581    bv,n 0(%r22)                 ; instructions to be here...
 582    nop
 583  */
 584
 585 /* Define offsets into the call dummy for the target function address */
 586 #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4)
 587 #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5)
 588
 589 #define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\
 590                     0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\
 591                     0x00010004, 0x08000240, 0xeac0c002, 0x08000240}
 592
 593 #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12)
 594
 595 #endif /* defined PA_LEVEL_0 */
 596
 597 #if !GDB_MULTI_ARCH
 598 #define CALL_DUMMY_START_OFFSET 0
 599 #endif
 600
 601 /* If we've reached a trap instruction within the call dummy, then
 602    we'll consider that to mean that we've reached the call dummy's
 603    end after its successful completion. */
 604 #define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
 605   (DEPRECATED_PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \
 606    (read_memory_integer((pc), 4) == BREAKPOINT32))
 607
 608 /*
 609  * Insert the specified number of args and function address
 610  * into a call sequence of the above form stored at DUMMYNAME.
 611  *
 612  * On the hppa we need to call the stack dummy through $$dyncall.
 613  * Therefore our version of FIX_CALL_DUMMY takes an extra argument,
 614  * real_pc, which is the location where gdb should start up the
 615  * inferior to do the function call.
 616  */
 617
 618 /* FIXME: brobecker 2002-12-26.  This macro is going to cause us some
 619    problems before we can go to multiarch partial as it has been diverted
 620    on HPUX to return the value of the PC!  */
 621 #define FIX_CALL_DUMMY hppa_fix_call_dummy
 622 extern CORE_ADDR hppa_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, int,
 623                                       struct value **, struct type *, int);
 624
 625 #if !GDB_MULTI_ARCH
 626 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
 627   (hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)))
 628 extern CORE_ADDR hppa_push_arguments (int, struct value **, CORE_ADDR, int,
 629                                       CORE_ADDR);
 630 #endif
 631
 632 \f
 633 #if !GDB_MULTI_ARCH
 634 extern CORE_ADDR hppa_smash_text_address (CORE_ADDR addr);
 635 #define SMASH_TEXT_ADDRESS(addr) hppa_smash_text_address (addr)
 636 #endif
 637
 638 #define GDB_TARGET_IS_HPPA
 639
 640 #if !GDB_MULTI_ARCH
 641 #define BELIEVE_PCC_PROMOTION 1
 642 #endif
 643
 644 /*
 645  * Unwind table and descriptor.
 646  */
 647
 648 struct unwind_table_entry
 649   {
 650     CORE_ADDR region_start;
 651     CORE_ADDR region_end;
 652
 653     unsigned int Cannot_unwind:1;       /* 0 */
 654     unsigned int Millicode:1;   /* 1 */
 655     unsigned int Millicode_save_sr0:1;  /* 2 */
 656     unsigned int Region_description:2;  /* 3..4 */
 657     unsigned int reserved1:1;   /* 5 */
 658     unsigned int Entry_SR:1;    /* 6 */
 659     unsigned int Entry_FR:4;    /* number saved *//* 7..10 */
 660     unsigned int Entry_GR:5;    /* number saved *//* 11..15 */
 661     unsigned int Args_stored:1; /* 16 */
 662     unsigned int Variable_Frame:1;      /* 17 */
 663     unsigned int Separate_Package_Body:1;       /* 18 */
 664     unsigned int Frame_Extension_Millicode:1;   /* 19 */
 665     unsigned int Stack_Overflow_Check:1;        /* 20 */
 666     unsigned int Two_Instruction_SP_Increment:1;        /* 21 */
 667     unsigned int Ada_Region:1;  /* 22 */
 668     unsigned int cxx_info:1;    /* 23 */
 669     unsigned int cxx_try_catch:1;       /* 24 */
 670     unsigned int sched_entry_seq:1;     /* 25 */
 671     unsigned int reserved2:1;   /* 26 */
 672     unsigned int Save_SP:1;     /* 27 */
 673     unsigned int Save_RP:1;     /* 28 */
 674     unsigned int Save_MRP_in_frame:1;   /* 29 */
 675     unsigned int extn_ptr_defined:1;    /* 30 */
 676     unsigned int Cleanup_defined:1;     /* 31 */
 677
 678     unsigned int MPE_XL_interrupt_marker:1;     /* 0 */
 679     unsigned int HP_UX_interrupt_marker:1;      /* 1 */
 680     unsigned int Large_frame:1; /* 2 */
 681     unsigned int Pseudo_SP_Set:1;       /* 3 */
 682     unsigned int reserved4:1;   /* 4 */
 683     unsigned int Total_frame_size:27;   /* 5..31 */
 684
 685     /* This is *NOT* part of an actual unwind_descriptor in an object
 686        file.  It is *ONLY* part of the "internalized" descriptors that
 687        we create from those in a file.
 688      */
 689     struct
 690       {
 691         unsigned int stub_type:4;       /* 0..3 */
 692         unsigned int padding:28;        /* 4..31 */
 693       }
 694     stub_unwind;
 695   };
 696
 697 /* HP linkers also generate unwinds for various linker-generated stubs.
 698    GDB reads in the stubs from the $UNWIND_END$ subspace, then
 699    "converts" them into normal unwind entries using some of the reserved
 700    fields to store the stub type.  */
 701
 702 struct stub_unwind_entry
 703   {
 704     /* The offset within the executable for the associated stub.  */
 705     unsigned stub_offset;
 706
 707     /* The type of stub this unwind entry describes.  */
 708     char type;
 709
 710     /* Unknown.  Not needed by GDB at this time.  */
 711     char prs_info;
 712
 713     /* Length (in instructions) of the associated stub.  */
 714     short stub_length;
 715   };
 716
 717 /* Sizes (in bytes) of the native unwind entries.  */
 718 #define UNWIND_ENTRY_SIZE 16
 719 #define STUB_UNWIND_ENTRY_SIZE 8
 720
 721 /* The gaps represent linker stubs used in MPE and space for future
 722    expansion.  */
 723 enum unwind_stub_types
 724   {
 725     LONG_BRANCH = 1,
 726     PARAMETER_RELOCATION = 2,
 727     EXPORT = 10,
 728     IMPORT = 11,
 729     IMPORT_SHLIB = 12,
 730   };
 731
 732 /* We use the objfile->obj_private pointer for two things:
 733
 734  * 1.  An unwind table;
 735  *
 736  * 2.  A pointer to any associated shared library object.
 737  *
 738  * #defines are used to help refer to these objects.
 739  */
 740
 741 /* Info about the unwind table associated with an object file.
 742
 743  * This is hung off of the "objfile->obj_private" pointer, and
 744  * is allocated in the objfile's psymbol obstack.  This allows
 745  * us to have unique unwind info for each executable and shared
 746  * library that we are debugging.
 747  */
 748 struct obj_unwind_info
 749   {
 750     struct unwind_table_entry *table;   /* Pointer to unwind info */
 751     struct unwind_table_entry *cache;   /* Pointer to last entry we found */
 752     int last;                   /* Index of last entry */
 753   };
 754
 755 typedef struct obj_private_struct
 756   {
 757     struct obj_unwind_info *unwind_info;        /* a pointer */
 758     struct so_list *so_info;    /* a pointer  */
 759     CORE_ADDR dp;
 760   }
 761 obj_private_data_t;
 762
 763 #if 0
 764 extern void target_write_pc (CORE_ADDR, int);
 765 extern CORE_ADDR target_read_pc (int);
 766 extern CORE_ADDR skip_trampoline_code (CORE_ADDR, char *);
 767 #endif
 768
 769 #if !GDB_MULTI_ARCH
 770 #define TARGET_READ_PC(pid) hppa_target_read_pc (pid)
 771 extern CORE_ADDR hppa_target_read_pc (ptid_t);
 772 #endif
 773
 774 #if !GDB_MULTI_ARCH
 775 #define TARGET_WRITE_PC(v,pid) hppa_target_write_pc (v,pid)
 776 extern void hppa_target_write_pc (CORE_ADDR, ptid_t);
 777 #endif
 778
 779 #if !GDB_MULTI_ARCH
 780 #define TARGET_READ_FP() hppa_target_read_fp ()
 781 extern CORE_ADDR hppa_target_read_fp (void);
 782 #endif
 783
 784 /* For a number of horrible reasons we may have to adjust the location
 785    of variables on the stack.  Ugh.  */
 786 #define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR)
 787 extern int hpread_adjust_stack_address (CORE_ADDR);
 788
 789 /* Here's how to step off a permanent breakpoint.  */
 790 #define SKIP_PERMANENT_BREAKPOINT (hppa_skip_permanent_breakpoint)
 791 extern void hppa_skip_permanent_breakpoint (void);
 792
 793 /* On HP-UX, certain system routines (millicode) have names beginning
 794    with $ or $$, e.g. $$dyncall, which handles inter-space procedure
 795    calls on PA-RISC.  Tell the expression parser to check for those
 796    when parsing tokens that begin with "$".  */
 797 #define SYMBOLS_CAN_START_WITH_DOLLAR (1)