gdb/doc/ChangeLog

   1 Mon May 24 10:07:39 1999  Andrew Cagney  <cagney@b1.cygnus.com>
   2
   3         * gdbint.texinfo (FRAME_NUM_ARGS): Update definition.  Parameter
   4         numargs was dropped.
   5
   6 Thu May 20 12:26:59 1999  Andrew Cagney  <cagney@b1.cygnus.com>
   7
   8         * gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.
   9
  10 Tue Apr 27 19:14:20 1999  Andrew Cagney  <cagney@b1.cygnus.com>
  11
  12         * gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
  13         Update.
  14
  15 Thu Apr 22 13:07:37 1999  Andrew Cagney  <cagney@b1.cygnus.com>
  16
  17         * gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
  18         (GET_SAVED_REGISTER): Update, not just the a29k uses this.
  19
  20 Wed Apr 21 13:59:01 1999  Dave Brolley  <brolley@cygnus.com>
  21
  22         * gdbint.texinfo: Fix typos: $ -> @.
  23
  24 Tue Apr 20 11:59:38 1999  Andrew Cagney  <cagney@b1.cygnus.com>
  25
  26         * gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
  27         LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
  28         BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
  29         BREAKPOINT_FROM_PC.
  30
  31 Mon Apr 12 16:00:44 1999  Andrew Cagney  <cagney@b1.cygnus.com>
  32
  33         * gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
  34         CALL_DUMMY_STACK_ADJUST): Document.
  35
  36 Thu Apr  8 17:23:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
  37
  38         * gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
  39         SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.
  40
  41 1999-04-02  Stan Shebs  <shebs@andros.cygnus.com>
  42
  43         * gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
  44         longer exists.
  45
  46 Tue Mar  9 19:25:11 1999  Stan Shebs  <shebs@andros.cygnus.com>
  47
  48         * gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
  49         nearly all @ifset/@ifclear conditionals; nobody uses them, and
  50         they make the manual source incomprehensible.
  51         * h8-cfg.texi: Remove, hasn't been used in years.
  52
  53 Thu Feb 11 18:00:59 1999  Stan Shebs  <shebs@andros.cygnus.com>
  54
  55         * gdb.texinfo: Update the credits.
  56
  57 Mon Feb  8 17:33:57 1999  Stan Shebs  <shebs@andros.cygnus.com>
  58
  59         * gdb.texinfo: Fix mistakes noticed in printout of last
  60         draft, add Alpha to discussion of heuristic fence post.
  61
  62 Fri Feb  5 17:20:00 1999  Stan Shebs  <shebs@andros.cygnus.com>
  63
  64         * gdb.texinfo, remote.texi: Many changes; update to Seventh
  65         Edition, merge some HP changes into mainline, describe some
  66         previously undocumented features, describe more of the target
  67         commands available, eliminate obsolete section on renamed
  68         commands.
  69         * all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.
  70
  71 Wed Jan 20 17:47:45 1999  Stan Shebs  <shebs@andros.cygnus.com>
  72
  73         * gdb.texinfo: Make many HPPA conditionals unconditional,
  74         including catchpoint description, since now on for all configs.
  75         * all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
  76         specializations.
  77
  78 Thu Jan 14 17:10:12 1999  Stan Shebs  <shebs@andros.cygnus.com>
  79
  80         * Makefile.in (GDBvn.texi): Fix match expression to work with
  81         current format of VERSION in gdb/Makefile.in.
  82         * gdb.texinfo: Fix node ref to match new readline.
  83
  84 Wed Jan 13 10:38:40 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
  85
  86         * gdb.texinfo: Changes made as part of a project to merge in
  87           changes made by HP. Documentation makes extensive use of
  88           @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
  89           on remote debugging. There are differences in documentation
  90           (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
  91           the HP manual discusses catchpoints, hardware watchpoints, and
  92           some HPUX specific limitations for shared library support.
  93
  94           There are also a number of @node changes.
  95
  96 1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
  97
  98         * gdbint.texinfo (Formatting): Disambiguate a sentence.
  99         (C Usage): Same.
 100
 101 Wed Jan  6 11:55:34 1999  David Taylor  <taylor@texas.cygnus.com>
 102
 103         The following changes were made by Edith Epstein
 104         <eepstein@cygnus.com> as part of a project to merge in changes
 105         made by HP.
 106
 107         * HPPA-cfg.texi: new file.
 108
 109         * all-cfg.texi: set HPPA for HP PA-RISC targets.
 110
 111         * refcard.tex: change documentation about catch.
 112           removed info catch.
 113
 114 Mon Jan  4 18:29:18 1999  Stan Shebs  <shebs@andros.cygnus.com>
 115
 116         * gdbint.texinfo: Expand on GDB's coding standards,
 117         specify the use of arg names with prototypes.
 118
 119 1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
 120
 121         * gdb.texinfo: Fix tipo.
 122
 123 Sun Dec 13 10:27:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 124
 125         * gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
 126         TARGET_BYTE_ORDER_SELECTABLE_P.
 127
 128 Thu Dec 10 16:07:09 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 129
 130         * gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.
 131
 132 1998-12-09  Jim Blandy  <jimb@zwingli.cygnus.com>
 133
 134         * agentexpr.texi: New file.
 135
 136 Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>
 137
 138         * gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.
 139
 140 1998-12-03  J.T. Conklin  <jtc@redbacknetworks.com>
 141
 142         * remote.texi: Changed wording that implied that the GDB remote
 143         protocol caches register values instead of GDB itself.
 144
 145 Tue Dec  1 17:45:43 1998  Stan Shebs  <shebs@andros.cygnus.com>
 146
 147         * gdbint.texinfo: Add some info about symbol readers.
 148         (CHILL_PRODUCER, etc): Comment out descriptions, not useful.
 149         (IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
 150         (IN_SOLIB_RETURN_TRAMPOLINE): Describe.
 151         (KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
 152
 153 Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>
 154
 155         * gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE):
 156
 157 Sat Nov 28 13:45:53 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 158
 159         * gdbint.texinfo (INNER_THAN): Update, now takes parameters.
 160
 161 Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>
 162
 163         * gdbint.texinfo (NO_SINGLE_STEP): Replace with
 164         SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.
 165
 166 Wed Oct 14 10:02:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 167
 168         * gdbint.texinfo: Fix minor typos.
 169
 170 Wed Sep 30 18:03:19 1998  Stan Shebs  <shebs@andros.cygnus.com>
 171
 172         * gdbint.texinfo: Complete overhaul.  Group descriptions more
 173         logically, add more info on generic algorithms, remove much
 174         obsolete and/or wrong material.
 175
 176 Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <ian@cygnus.com>
 177
 178         * stabs.texinfo (Method Type Descriptor): Expand and correct.
 179
 180 Mon May  4 10:37:12 1998  Brian Youmans (3diff@gnu.org)
 181
 182         * refcard.tex:  Copyright, address updates.
 183
 184 Tue Apr 21 18:09:56 1998  Stan Shebs  <shebs@andros.cygnus.com>
 185
 186         * gdb.texinfo (EDITION, DATE): Update and change to use ordinals
 187         for the edition instead of confusing GDB-version-like numbers.
 188
 189 Mon Apr 13 14:05:00 1998  Fred Fish  <fnf@cygnus.com>
 190
 191         * gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".
 192
 193 Thu Apr  2 16:52:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 194
 195         * LRS: Reformat a bit to keep text under 80 columns.
 196
 197 Thu Apr  2 16:10:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
 198
 199         * gdb.texinfo: Add some credits, mention bug monitor.
 200         * remote.texi: Mention mips monitor targets.
 201         * gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
 202
 203 Mon Feb  2 17:13:03 1998  Stan Shebs  <shebs@andros.cygnus.com>
 204
 205         * gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
 206         files, finish sorting of host vs target vs native macros, describe
 207         some more of them.
 208
 209 Tue Jan 13 16:44:50 1998  Fred Fish  <fnf@cygnus.com>
 210
 211         * gdbint.texinfo (Host Conditionals): Document change from
 212         using NO_MMALLOC to it's inverse, USE_MMALLOC.
 213
 214 Mon Nov 24 13:55:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 215
 216         * gdbint.texinfo (Host Conditionals): Document
 217         PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.
 218
 219 Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 220
 221         * gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
 222         Document LSEEK_NOT_LINEAR.
 223
 224 Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 225
 226         * stabs.texinfo (Stab Section Basics): Make it clear that only
 227         some versions of the GNU linker remove the leading N_UNDF symbol.
 228
 229 Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <ian@cygnus.com>
 230
 231         * stabs.texinfo (String Field): Document type number pairs here,
 232         instead of in the Sun specific section.
 233         (Include Files): The GNU linker supports the N_BINCL
 234         optimization.  Clarify the N_BINCL value, and what it is used
 235         for.
 236         (Procedures): Document N_FUN with an empty string to mark the end
 237         of a function.
 238         (Typedefs): Mention that Sun compilers may use N_GSYM for a type.
 239         (Sun Differences): Remove this node, as the information is now
 240         elsewhere in the main document.
 241         (Stab Section Basics): Mention that the GNU linker may optimize
 242         stabs and remove the leading N_UNDF symbol.
 243
 244 Mon Dec  9 12:23:32 1996  Roland Pesch  <roland@wrs.com>
 245
 246         * gdb.texinfo, refcard.tex: Restore author credit
 247
 248 Wed Oct  2 22:01:36 1996  Fred Fish  <fnf@fishfood.ninemoons.com>
 249
 250         * gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
 251         documentation to account for START and END macros taking
 252         one arg.
 253
 254 Thu Aug 22 17:59:03 1996  Fred Fish  <fnf@cygnus.com>
 255
 256         From: Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
 257         * gdb.texinfo (Frames): Fix typo.
 258
 259 Tue Jul 23 10:06:20 1996  Fred Fish  <fnf@cygnus.com>
 260
 261         * gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
 262         a target_signal as arg type, not a pid.
 263
 264 Fri Jul 12 11:10:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
 265
 266         * gdb.texinfo:  Document `set assembly-language'.
 267
 268 Thu Jul 11 13:50:28 1996  Stan Shebs  <shebs@andros.cygnus.com>
 269
 270         * remote.texi: Update list of stubs in the GDB distribution.
 271
 272 Fri Jul  5 15:38:54 1996  Fred Fish  <fnf@cygnus.com>
 273
 274         * gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
 275         Also document that some systems can use mmalloc but must define
 276         this if their C runtime allocates memory that is later freed.
 277         (MMCHECK_FORCE): Document new macro.
 278
 279 Fri Jun 28 22:17:10 1996  Dawn Perchik  <dawn@cygnus.com>
 280
 281         * remote.texi: Add documentation for target Sparclet.
 282
 283 Mon Jun 24 18:12:22 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 284
 285         * Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL,
 286         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
 287         * configure.in: Rewritten for autoconf.
 288         * configure: New.
 289
 290 Mon Jun 17 10:43:41 1996  Fred Fish  <fnf@cygnus.com>
 291
 292         * Makefile.in (DVIPS): New define, set to dvips.
 293         (dvi): Add stabs.dvi.
 294         (ps): New target.
 295         (all-doc): Depend on info, dvi, and ps targets.
 296         (STAGESTUFF): Add *.ps and *.dvi files.
 297         (clean-info, clean-dvi): Remove.
 298         (mostlyclean): Does not depend upon clean-info or clean-dvi,
 299         rules completely rewritten.
 300         (maintainer-clean): Remove clean-info and clean-dvi
 301         dependencies and put their actions in the rules.
 302         (gdb.ps): New target
 303         (gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
 304         intermediate TeX files, whether they have 2 or 3 character
 305         extensions.
 306         (gdbint.ps): Add target and rules.
 307         (gdb-internals): Delete unused target.
 308         (Makefile): Depends upon config.status also.
 309
 310 Sat Mar 30 15:46:58 1996  Fred Fish  <fnf@cygnus.com>
 311
 312         * gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
 313         set.
 314
 315 Sat Mar 16 15:10:20 1996  Fred Fish  <fnf@cygnus.com>
 316
 317         From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
 318         * gdb.texinfo (Expressions): Fix erroneous array constant example.
 319
 320 Sat Mar 16 13:28:45 1996  Fred Fish  <fnf@cygnus.com>
 321
 322         * gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.
 323
 324 Sat Feb 10 03:28:36 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 325
 326         * gdb.texinfo (Print settings):  Document
 327         `set/show print static-members' commands.
 328
 329 Wed Jan 10 14:16:37 1996  Fred Fish  <fnf@cygnus.com>
 330
 331         * gdbint.texinfo (Native): Document name change, coredep.c to
 332         core-aout.c.
 333
 334 Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 335
 336         * stabs.texinfo (Include Files): Document the values the SunOS4
 337         linker creates for N_BINCL/N_EINCL/N_EXCL stabs.
 338
 339 Fri Dec  8 21:08:44 1995  Fred Fish  <fnf@cygnus.com>
 340
 341         * gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
 342         Fix typo.
 343
 344 Fri Dec  1 11:07:50 1995  Fred Fish  <fnf@cygnus.com>
 345
 346         * gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
 347         "gdb.tar.Z".
 348
 349 Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <ian@cygnus.com>
 350
 351         * Makefile.in (maintainer-clean): New target, synonym for
 352         realclean.
 353
 354 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
 355
 356         * Update all FSF addresses except those in COPYING* files.
 357
 358 Wed Jul 19 18:43:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
 359
 360         From Richard Earnshaw (rearnsha@armltd.co.uk):
 361         * gdb.texinfo (convenience variables): Document $_exitcode.
 362         (quit): Document optional expression to use as exit code.
 363
 364 Thu Jun 22 21:27:33 1995  Victoria Mixon  <victoria@cygnus.com>
 365
 366         * gdb.texinfo, remote.texi: Brought up to date with various
 367         GDB changes.
 368
 369 Tue Jun 20 14:35:38 1995  Stan Shebs  <shebs@andros.cygnus.com>
 370
 371         * gdb.texinfo: Update dates and versions, fix comments about
 372         hardware watchpoints in future releases and about the
 373         sharedlibrary command.
 374
 375 Mon May  8 09:30:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 376
 377         * stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
 378         C_FUN stab.  Other cleanups.
 379
 380 Wed Apr 19 07:02:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 381
 382         * remote.texi (Bootstrapping): Clarify that flush_i_cache is only
 383         for the sparc stub.
 384
 385 Tue Apr 11 11:41:49 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 386
 387         * annotate.texi: Clarify which addresses have differing formats
 388         depending on the language and which do not.
 389
 390 Tue Mar 28 16:56:22 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 391
 392         * remote.texi (NetWare): Changed example to use BOARD= instead of
 393           NODE= argument to reflect correspoding change to gdbserve.nlm.
 394
 395 Fri Mar 17 06:47:02 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 396
 397         * stabs.texinfo (Negative Type Numbers): Mention the fact that
 398         GDB, as well as AIX dbx, supports the size type attribute.
 399
 400 Thu Mar 16 12:11:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 401
 402         * stabs.texinfo (Negative Type Numbers): Document types -31 to -34.
 403
 404 Mon Mar 13 16:49:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
 405
 406         * gdb.texinfo (Define):  Document $arg0... arguments to commands,
 407         and new 'if' and 'while' commands.
 408
 409 Fri Feb 17 15:24:35 1995  Per Bothner  <bothner@kalessin.cygnus.com>
 410
 411         * gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.
 412
 413 Wed Feb 15 11:59:18 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 414
 415         * all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
 416         * remote.texi (NetWare): New node, how to use gdbserve.nlm on
 417           NetWare targets.  Mostly stolen from the Server node.
 418
 419 Fri Feb 10 20:20:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 420
 421         * gdb.texinfo (Setting): Talk about the language of a source file
 422         versus the working language.  The old documentation did not match
 423         what GDB did.
 424
 425 Wed Feb  1 20:26:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 426
 427         * stabs.texinfo (Source Files): Document N_SO used to mark the end
 428         of a source file.
 429
 430 Mon Jan 23 14:23:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 431
 432         * gdb.texinfo (Processes): New node.
 433
 434 Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 435
 436         * remote.texi: Update documentation of set/show mipsfpu.
 437
 438
 439 Sun Sep  4 16:47:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
 440
 441         * gdbint.texinfo: Removed mentions of some incorrectly placed and
 442         obsolete conditionals, described some others.
 443
 444 Mon Aug  1 15:42:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 445
 446         * gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
 447         SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.
 448
 449 Mon Aug  1 15:12:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
 450
 451         * gdbint.texinfo: Put regex conditionals in their own table.
 452
 453 Tue Jul 26 18:32:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
 454
 455         * gdbint.texinfo: Removed mentions of many obsolete conditionals,
 456         described or fixed the descriptions of many others.
 457
 458 Sun Jul 17 14:14:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
 459
 460         * gdb.texinfo: Add some more credits.
 461         * gdbint.texinfo: Capitalize GDB consistently, describe some
 462         macros and remove some.
 463
 464 Thu Jul 14 18:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
 465
 466         * gdbint.texinfo: Removed mentions of many incorrectly placed and
 467         obsolete conditionals, described some others.
 468
 469 Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 470
 471         * gdb.texinfo (help targets):  Changed to `help target', which
 472         is the correct gdb command.
 473
 474 Wed Jun 22 18:00:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 475
 476         * annotate.texi (TODO): New node, for keeping track of annotations
 477         suggested but not yet implemented.
 478
 479 Wed Jun  1 16:10:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 480
 481         * stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
 482         another symbol, it is not the address itself.
 483
 484 Thu May  5 20:23:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
 485
 486         * stabs.texinfo (Stab Section Basics): Add comment about alignment
 487         of stabs-in-coff sections.
 488
 489 Wed May  4 06:26:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 490
 491         * annotate.texi: Change edition to 0.5 and date to May 1994.
 492         Add index.
 493         (Frames): New node, for frame annotation.
 494         (Displays): New node, for display annotation.
 495
 496         * remote.texi (MIPS Remote): Say that set timeout doesn't apply
 497         when waiting for your program to stop.
 498
 499 Fri Apr 29 18:24:46 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 500
 501         * annotate.texi (Breakpoint Info): Document annotation of header
 502         fields and record annotation.
 503
 504 Thu Apr 28 07:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 505
 506         * annotate.texi: New file, to document annotations.
 507
 508 Thu Apr 21 14:20:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 509
 510         * Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
 511         16 I meant to make this change but did not).  Do remove gdb-cfg.texi.
 512
 513 Wed Apr 20 11:22:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 514
 515         * stabs.texinfo (Stab Section Basics): Say what is in .stab
 516         section, and say n_strx field is compilation unit relative.
 517         * stabs.texinfo: Don't use @code for a.out when it is the name of
 518         an object file format.
 519
 520 Wed Apr 13 20:29:54 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 521
 522         * gdb.texinfo: Refer to file names, not path names, per rms
 523         convention.
 524         (Arguments): Fix typo.
 525
 526 Thu Mar 24 08:09:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 527
 528         * stabs.texinfo (Global Variables): Talk about stabs in files
 529         where variables are referenced, but not defined.
 530
 531 Wed Mar 23 07:16:36 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 532
 533         * stabs.texinfo: Move stuff on @ and # type descriptors from node
 534         Cplusplus to new nodes Member Type Descriptor and Method Type
 535         Descriptor.  Re-write stuff for #.
 536
 537 Wed Mar 16 08:20:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 538
 539         * gdb.texinfo (Print Settings): Don't document "set print
 540         fast-symbolic-addr off".  The bug which it worked around was fixed
 541         on 25 Feb 94 in coffread.c, so I'm nuking the command.
 542
 543         * stabs.texinfo (Alternate Entry Points): New node, rewritten from
 544         N_ENTRY node.
 545
 546         * stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.
 547
 548 Tue Mar 15 08:43:02 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 549
 550         * gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
 551         references to ieee-float.c.
 552
 553 Fri Mar 11 08:09:40 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 554
 555         * gdb.texinfo (Set Breaks): Update documentation for tbreak to
 556         match what the code actually does.
 557
 558 Wed Mar  9 19:43:05 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 559
 560         * stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.
 561
 562 Tue Mar  1 17:04:43 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 563
 564         * stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
 565         i, and b.
 566
 567 Wed Feb 23 10:44:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
 568
 569         * stabs.texinfo: Document N_RBRAC as function relative for COFF as
 570         well as for ELF and SOM.  Unify the descriptions of ELF and SOM
 571         as "stabs in sections" rather than just saying "ELF and SOM".
 572         Also make that stuff apply to COFF.
 573
 574 Fri Feb 18 08:25:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 575
 576         * gdb.texinfo (Formatting Documentation): Change GhostScript to
 577         Ghostscript.
 578
 579 Fri Feb  4 06:31:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 580
 581         * gdb.texinfo (Continuing and Stepping): When talking about "step"
 582         versus functions without line numbers, also mention stepping into
 583         them as well as "step" when you are in them.  Tell the user how to
 584         deal with the situation.  Add comment about "debugging information".
 585
 586 Thu Feb  3 11:39:59 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 587
 588         * stabs.texinfo (Enumerations): Document restriction on where
 589         enumeration types can appear and still win with GDB.
 590
 591 Wed Feb  2 11:29:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 592
 593         * stabs.texinfo (Negative Type Numbers): Document format for type
 594         -16.
 595
 596 Thu Jan 27 16:53:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 597
 598         * gdb.texinfo (Selection, Frame Info): Update information about
 599         arbitrary frame specficiations.
 600
 601 Wed Jan 26 15:31:57 1994  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 602
 603         * gdb.texinfo, remote.texi: general editing pass prior to Net release
 604
 605 Tue Jan 25 12:12:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 606
 607         * stabs.texinfo (String Field): Discuss continuing stabs with ?.
 608
 609 Wed Jan 19 06:39:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 610
 611         * stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.
 612
 613 Sun Jan 16 12:43:32 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 614
 615         * stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
 616         Differences node to Statics node.
 617         (Statics): Discuss XCOFF use of V symbol descriptor.
 618
 619         * Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
 620         not clean.
 621
 622 Wed Jan 12 21:29:54 1994  John Gilmore  (gnu@cygnus.com)
 623
 624         * gdb.texinfo (Print Settings): Document `set print
 625         fast-symbolic-addr' and improve the doc for some other
 626         `set print's.
 627
 628 Mon Jan  3 17:23:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 629
 630         * stabs.texinfo (String Field): Talk about defining several type
 631         numbers at once.
 632         Fix lint regarding changing node ELF Transformations to
 633         ELF and SOM Transformations.
 634
 635 Fri Dec 31 00:42:43 1993  John Gilmore  (gnu@cygnus.com)
 636
 637         * stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).
 638
 639 Tue Dec 28 09:30:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 640
 641         * stabs.texinfo (Cross-References): `::' is for nested types only
 642         within <>.
 643         (Structures): Document static members.
 644
 645 Mon Dec 27 13:55:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 646
 647         * stabs.texinfo: Document S type attribute.
 648
 649 Sun Dec 26 20:46:36 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
 650
 651         * stabs.texinfo: Add notes about stabs-in-som where appropriate.
 652
 653 Fri Dec  3 19:13:19 1993  John Gilmore  (gnu@cygnus.com)
 654
 655         * gdbint.texinfo:  Fix a few typos.
 656
 657 Sun Nov 28 18:06:25 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 658
 659         * gdb.texinfo, remote.texi: formatting improvements
 660
 661         * gdb.texinfo (New Features): mention threads.
 662         (Summary, C): fix xrefs in newly contributed text.
 663         (Threads): index entries, clarifications, example
 664         (passim): minor typos fixed, phrasing improvements
 665
 666         * remote.texi (Bootstrapping): rephrase text on ^C and add index
 667         entries; (Server): explain use of gdbserver w/real-time systems,
 668         add example of conflicting TCP port; (MIPS Remote) break up
 669         running text into table, highlighting commands, and add example.
 670
 671 Wed Nov 24 14:15:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 672
 673         * refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed
 674
 675 Fri Nov 12 16:10:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 676
 677         * stabs.texinfo (Nested Symbols): New node.
 678         (String Field, Symbol Descriptors, Cross-References): Refer to it.
 679
 680 Thu Nov 11 13:26:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 681
 682         * stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
 683         to picking which Bbss.bss symbol to use, and (because there seems to
 684         be no good way of doing it) re-write some of the text to make it
 685         sound like Bbss.bss isn't such a great idea after all (as currently
 686         designed).
 687
 688         * gdb.texinfo (C): In addition to saying people have to use g++ for
 689         good results, say they have to use stabs.  Specifically say cfront
 690         doesn't work well.
 691         (Summary): Merge in information on Modula-2, Pascal, and Chill from
 692         the gdb README.  Add xrefs to places where the support for the various
 693         languages is described in detail.
 694
 695 Mon Nov  8 11:47:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 696
 697         * stabs.texinfo: Clean up stuff about visibility and virtual
 698         characters.
 699
 700         * stabs.texinfo (N_M2C): Cite Sun doc.
 701
 702 Fri Nov  5 16:27:27 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 703
 704         * gdb.texinfo: updates re threads.
 705         * remote.texinfo: avoid index entries starting with digits.
 706
 707 Tue Nov  2 09:08:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 708
 709         * stabs.texinfo (Enumerations): Talk about large, negative and
 710         octal values.  Clean up cross reference to type attributes.
 711         (String Field): Say that GDB 4.11 supports size attribute.
 712
 713 Sun Oct 31 13:31:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 714
 715         * remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
 716         is a mandatory step.  Make the stuff about that more concise.
 717
 718 Wed Oct 27 00:25:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 719
 720         * stabs.texinfo (Class Names): New node.
 721
 722         * gdb.texinfo (Command Files): Explain order of init file reading.
 723
 724         * remote.texi (Bootstrapping): Talk about getting the serial driver
 725         to deal with ^C sent by gdb to stop the remote system.
 726
 727 Mon Oct 25 03:25:41 1993  Tom Lord  (lord@cygnus.com)
 728
 729         * libgdb.texinfo (I/O): incorporated better phrasing from rich.
 730
 731         * libgdb.texinfo (Defining Commands): made the DOC arg
 732         to gdb_define_app_command a char * instead of char **
 733         per a suggestion from kingdon.
 734
 735         * libgdb.texinfo: total rewrite from a different starting
 736         premise.
 737
 738 Wed Oct 20 18:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 739
 740         * stabs.texinfo (Local Variable Parameters): Re-write paragraph on
 741         floats passed as doubles (to improve clarity).
 742
 743 Tue Oct 19 14:21:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 744
 745         * gdb.texinfo (Source Path): index entries for $cwd, $pdir
 746
 747         * a4rc.sed: update to work with Andreas Vogel papersize params
 748
 749         * refcard.tex: use Andreas Vogel simplifications of papersize
 750         params; remove useless version info; update copyright date.
 751
 752 Tue Oct 19 10:46:22 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 753
 754         * gdb.texinfo (Symbols): Add class NAME to doc for ptype.
 755
 756 Tue Oct 12 09:11:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 757
 758         * gdb.texinfo (Files): Say what address the load command loads it at.
 759
 760         * stabs.texinfo (Common Blocks): Minor cleanups.
 761
 762         * stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
 763         that Sun has backed away from the linker kludge and thus the relevant
 764         issue is changes to the SunPRO tools, not the Solaris linker.
 765
 766         * stabs.texinfo (Traditional Integer Types): Clean up description
 767         of octal bounds a little bit.  Document extra leading zeroes.
 768
 769 Thu Oct  7 16:15:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 770
 771         * gdb.texinfo (Signaling): Update for symbolic symbol names
 772         and add a section explaining the difference between the GDB
 773         signal command and the shell kill utility.
 774
 775 Wed Oct  6 13:23:01 1993  Tom Lord  (lord@rtl.cygnus.com)
 776
 777         * libgdb.texinfo: added `@' to braces that were unescaped.
 778
 779 Mon Oct  4 10:42:18 1993  Tom Lord  (lord@rtl.cygnus.com)
 780
 781         * libgdb.texinfo: new file.  Spec for the gdb library.
 782
 783 Sun Oct  3 15:26:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 784
 785         * stabs.texinfo (Include Files): Fix typo (start -> end).
 786
 787 Thu Sep 30 18:24:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 788
 789         * gdb.texinfo, remote.texi: assorted small improvements, mostly
 790         from Melissa at FSF's editing pass.
 791
 792 Thu Sep 30 11:54:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 793
 794         * gdb.texinfo: Remove stuff about ar and 14 character filenames.
 795         I believe this was fixed by the 13 Sep 89 change to print_frame_info.
 796         Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
 797
 798 Wed Sep 22 21:22:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 799
 800         * remote.texi (Bootstrapping): Discuss 386 call gates.
 801
 802 Sat Sep 18 17:10:44 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
 803
 804         * stabs.texinfo (Based Variables): New node.
 805
 806 Thu Sep 16 17:48:55 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
 807
 808         * stabs.texinfo (Negative Type Numbers): Re-write discussions of
 809         names, sizes, and formats to suggest how not to lose.
 810
 811 Sat Sep 11 09:35:11 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
 812
 813         * stabs.texinfo (Methods): Fix typo.
 814
 815 Fri Sep 10 06:34:20 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 816
 817         * gdb.texinfo: Fix a few typos.
 818
 819 Wed Sep  8 09:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 820
 821         * gdb.texinfo: Clarify how well it works with Fortran.
 822
 823         * stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
 824         More on relocating stabs in ELF files.
 825
 826 Tue Sep  7 13:45:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 827
 828         * stabs.texinfo (Stabs In ELF): Talk about N_FUN value.
 829
 830 Mon Sep  6 19:23:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 831
 832         * stabs.texinfo (Local Variable Parameters): Talk about nameless
 833         parameters on VAX.
 834
 835 Fri Sep  3 17:06:08 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 836
 837         * gdb.texinfo: @up/@down -> @raisesections/@lowersections
 838
 839 Fri Sep  3 12:04:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 840
 841         * stabs.texinfo: Make info author notice match the TeX author notice.
 842
 843 Tue Aug 31 13:21:06 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 844
 845         * stabs.texinfo: Initial-caps all words in node names and
 846         non-trivial words in section names.
 847
 848 Mon Aug 30 11:13:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 849
 850         * stabs.texinfo: Many minor cleanups.
 851
 852         * stabs.texinfo: Remove @deffn except from Expanded Reference node.
 853
 854 Sat Aug 28 12:08:09 1993  David J. MacKenzie  (djm@edison.eng.umd.edu)
 855
 856         * stabs.texinfo: Remove full description of big example.
 857         It's not really helpful; just use pieces of it where appropriate.
 858         Add more Texinfo formatting directives (@samp, etc.).
 859         Use @deffn to define stab types.
 860         Eliminate some wordiness.  Break up some nodes.
 861         Add an (alphabetized) index of symbol types.
 862         Use consistent capitalization style in node and section names.
 863
 864 Thu Aug 26 06:36:31 1993  Fred Fish  (fnf@deneb.cygnus.com)
 865
 866         * gdb.texinfo:  Change typo "Two two" to "The two".
 867
 868 Sun Aug 22 12:15:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 869
 870         * stabs.texinfo (XCOFF-differences): Remove references to
 871         non-existent types N_DECL and N_RPSYM.
 872
 873         * stabs.texinfo (String Field): Say that type attributes bug is
 874         fixed in GDB 4.10, since it is.
 875
 876         * stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.
 877
 878 Sat Aug 21 04:32:28 1993  David MacKenzie  (djm@cygnus.com)
 879
 880         * stabs.texinfo: Formatting cleanups.
 881
 882 Fri Aug 20 20:49:53 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 883
 884         * stabs.texinfo: When explaining the n_type of a stab, standardize
 885         how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
 886         no tabs, use @r).
 887         (Global Variables): Clean up.
 888
 889 Tue Aug 17 15:57:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 890
 891         * stabs.texinfo (Stack Variables): Re-write.
 892
 893 Mon Aug 16 21:20:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 894
 895         * stabs.texinfo (Stabs-in-elf): Talk about getting the start
 896         addresses of a source file.  Also revise formatting.
 897         Change "object module" or "object file" to "source file".
 898         Various: Miscellaneous cleanups.
 899
 900 Thu Aug 12 15:11:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 901
 902         * stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.
 903
 904 Tue Aug 10 16:57:49 1993  Stan Shebs  (shebs@rtl.cygnus.com)
 905
 906         * gdbint.texinfo: Removed many nonsensical machine-collected
 907         host and target conditionals, described some of the remainder.
 908
 909 Tue Aug 10 13:28:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 910
 911         * gdbint.texinfo (Getting Started): Use @itemize, not @table.
 912
 913         * gdbint.texinfo (Top): Add name to @top line, and re-write the
 914         paragraph which follows.
 915
 916         * gdbint.texinfo (Host): Use @code not @samp for Makefile
 917         variables.  Looks better and avoids overful hbox.
 918
 919 Fri Jul 30 18:26:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 920
 921         * stabs.texinfo (Procedures): Improve stuff on nested functions.
 922
 923 Thu Jul 29 15:10:58 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 924
 925         * remote.texi: (MIPS Remote) clearer doc for set/show timeout,
 926         retransmit-timeout
 927
 928 Thu Jul 29 13:16:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 929
 930         * gdbint.texinfo: Update statement about `some ancient Unix
 931         systems, like Ultrix 4.0' to Ultrix 4.2.
 932
 933 Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)
 934
 935         * h8-cfg.texi, all-cfg.texi: new flag GDBSERVER
 936
 937         * Makefile.in: depend on remote.texi rather than gdbinv-s.texi
 938
 939         * remote.texi: (Server) New node on gdbserver.  (Remote Serial,
 940         ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.
 941
 942         * remote.texi: new name for former gdbinv-s.texi
 943
 944         * gdb.texinfo: use remote.texi rather than gdbinv-s.texi
 945
 946 Wed Jul 28 08:26:24 1993  Ian Lance Taylor  (ian@cygnus.com)
 947
 948         * gdbinv-s.texi: Documented timeout and retransmit-timeout
 949         variables for MIPS remote debugging protocol.
 950
 951 Mon Jul 26 13:00:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 952
 953         * stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.
 954
 955 Tue Jul 20 16:30:41 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
 956
 957         * Makefile.in (refcard.dvi): Use srcdir where necessary.
 958
 959 Mon Jul 19 12:02:50 1993  Roland H. Pesch  (pesch@cygnus.com)
 960
 961         * gdb.texinfo: repair conditional bugs in text markup
 962
 963 Fri Jul 16 18:57:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 964
 965         * gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
 966         to select Modula-2 material.
 967
 968 Thu Jul 15 13:15:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 969
 970         * stabs.texinfo: Cleanups regarding statics.
 971
 972         * gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
 973         (Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.
 974
 975 Mon Jul 12 13:37:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 976
 977         * stabs.texinfo: N_MAIN is sometimes used for C.
 978
 979 Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 980
 981         * gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.
 982
 983 Tue Jul  6 12:41:28 1993  John Gilmore  (gnu@cygnus.com)
 984
 985         * gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
 986         removed from the code by Kingdon.
 987
 988 Tue Jul  6 12:24:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 989
 990         * gdb.texinfo (Break Commands): Remove stuff about flushing terminal
 991         input when evaluating breakpoint conditions; the bug has been fixed.
 992
 993         * gdb.texinfo (Continuing and Stepping): Argument to "continue"
 994         sets the ignore count to N-1, not to N.
 995
 996 Thu Jul  1 14:57:42 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 997
 998         * refcard.tex (\hoffset): correct longstanding error to match
 999           intended offset; avoids cutting off edge on some printers
1000
1001 Wed Jun 30 18:23:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1002
1003         * stabs.texinfo (Parameters): Say that order of stabs is significant.
1004
1005 Fri Jun 25 21:34:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1006
1007         * stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.
1008
1009 Fri Jun 25 16:15:10 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1010
1011         * Makefile.in: (REFEDITS) new var to control whether PS or CM
1012         fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
1013         collect sed edits if any, apply to refcard before formatting;
1014         (refcard.ps) stop implying PS fonts if PS output requested;
1015         (lrefcard.ps) delete extra target for variant PS fonts
1016
1017         * refcard.tex: parametrize papersize dependent info, collect
1018           in easily replaced spot
1019
1020         * a4rc.sed: new file, edits to refcard for A4 paper
1021
1022 Fri Jun 25 14:21:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1023
1024         * stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.
1025
1026 Wed Jun 23 15:02:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1027
1028         * stabs.texinfo (Negative Type Numbers): Minor character cleanups.
1029
1030 Tue Jun 22 16:31:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1031
1032         * stabs.texinfo: Express disapproval of 'D' symbol descriptor
1033         politely rather than rudely.
1034
1035 Fri Jun 18 19:42:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1036
1037         * stabs.texinfo: Document common blocks.
1038
1039 Fri Jun 18 12:12:57 1993  Fred Fish  (fnf@cygnus.com)
1040
1041         * stabs.texinfo:  Add some basic info about stabs-in-elf.
1042
1043 Fri Jun 18 13:57:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1044
1045         * stabs.texinfo (Top): Minor cleanup.
1046
1047 Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
1048
1049         * Makefile.in (install-info): remove parentdir support
1050
1051 Tue Jun 15 18:11:39 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1052
1053         * gdb.texinfo (Copying): delete this node and references to it;
1054         RMS says this manual need not carry GPL. (passim): Improvements
1055         from last round at FSF, largely due to Ian Taylor review, and
1056         minor formatting improvements.
1057
1058         * gdbinv-s.texi (passim): Improvements from last round at FSF,
1059         largely due to Ian Taylor review. (Debug Session): minor edits to
1060         new text.
1061
1062 Sun Jun 13 12:52:39 1993  Jim Kingdon  (kingdon@cygnus.com)
1063
1064         * Makefile.in (realclean): Remove info and dvi files too.
1065
1066 Sat Jun 12 16:09:22 1993  Jim Kingdon  (kingdon@cygnus.com)
1067
1068         * {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
1069         * Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
1070         * gdb.texinfo: Change accordingly.
1071
1072         * stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
1073         N_{L,R}BRAC,N_SLINE are relative to.
1074
1075 Fri Jun 11 15:15:55 1993  Jim Kingdon  (kingdon@cygnus.com)
1076
1077         * Makefile.in (GDBvn.texi): Update atomically.
1078
1079 Wed Jun  9 10:58:16 1993  Jim Kingdon  (kingdon@cygnus.com)
1080
1081         * gdbinv-s.texi (Debug Session): Document exceptionHook.
1082
1083 Tue Jun  8 13:42:04 1993  Jim Kingdon  (kingdon@cygnus.com)
1084
1085         * gdb.texinfo (Print Settings): Move all stuff relating to symbolic
1086         addresses together.  Also motivate the set print symbol-filename
1087         command and suggest other solutions.
1088
1089 Tue Jun  1 22:46:43 1993  Fred Fish  (fnf@cygnus.com)
1090
1091         * gdb.texinfo (set print elements):  Note that the number of
1092         elements is set to unlimited by "set print elements 0".
1093
1094 Mon May 31 08:06:55 1993  Jim Kingdon  (kingdon@cygnus.com)
1095
1096         * stabs.texinfo (Builtin Type Descriptors): Try to clarify what
1097         NF_LDOUBLE means.
1098         (Stab Types): Include Solaris stab types.
1099         (Procedures): Document Solaris extensions.
1100
1101 Thu May 27 06:20:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1102
1103         * gdb.texinfo:  Add `set print symbol-filename' doc.
1104
1105 Wed May 26 00:26:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1106
1107         * stabs.texinfo (Arrays): Talk about type definition vs. type
1108         information.
1109
1110         * stabs.texinfo (Builtin Type Descriptors): Talk about omitting
1111         the trailing semicolon.
1112
1113 Tue May 25 14:49:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1114
1115         * stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
1116         and merge in other parts of the document addressing these subjects.
1117         gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.
1118
1119         * stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
1120         at the end of a range type.
1121
1122         * stabs.texinfo (Subranges): "A offset" and "T offset" are not
1123         AIX extensions.
1124
1125 Mon May 24 09:00:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1126
1127         * stabs.texinfo (Stabs Format):  Misc fixes.
1128
1129 Sat May 22 10:40:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1130
1131         * stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
1132         (Traditional builtin types): Document convex convention for long long.
1133         (Negative builtin types): Discuss type names, and misc fixes.
1134
1135 Fri May 21 11:20:31 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1136
1137         * stabs.texinfo (Builtin Type Descriptors): Document the floating
1138         point types used with @samp{R} type descriptor.
1139         (Symbol Descriptors): Describe how to handle conflict between
1140         different meanings of @samp{P} symbol descriptor.
1141
1142 Thu May 20 13:35:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1143
1144         * stabs.texinfo: Remove node Quick Reference and put its children
1145         directly under the main menu.
1146
1147         * stabs.texinfo: Many more changes to bring it into line with
1148         AIX documentation and reality.  I think it now has all the
1149         information from the AIX documentation, except that I burned
1150         out when I got to variant records (Pascal and Modula-2) and
1151         all the COBOL types.  Oh well, we can add them later when we're
1152         worrying more about those languages.
1153
1154         * stabs.texinfo (Automatic variables): Talk about what it means
1155         to omit the symbol descriptor.
1156
1157 Tue May 18 17:59:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1158
1159         * stabs.texinfo (Parameters): Add "(sometimes)" when describing
1160         gcc2 behavior with promoted args.
1161
1162 Fri May 14 21:35:29 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1163
1164         * gdb.texinfo: include readline appendices in info version of manual
1165
1166 Fri May  7 11:56:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1167
1168         * gdbinv-s.texi (Remote Serial): describe new ^C behavior in
1169         target remote.
1170
1171         * gdb.texinfo (Machine Code): more index entries for disassemble
1172
1173 Fri May  7 10:12:30 1993  Fred Fish  (fnf@cygnus.com)
1174
1175         * Clarify the intended use of the gdb-testers and gdb-patches
1176         mailing lists, and shrink gzip comment.
1177
1178 Thu May  6 16:39:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1179
1180         * gdb.texinfo (Shell Commands): do not mention SHELL env var in
1181         DOSHOST configuration of manual.
1182
1183         * gdb.texinfo (MIPS Stack): new node.
1184
1185         * all-config.texi (MIPS) new switch.
1186
1187         * gdbinv-s.texi (Nindy Options) Remove two instances of future
1188         tense; (MIPS Remote) new node.
1189
1190         * gdb.texinfo (passim) rephrases to work around makeinfo @value
1191         bug; (Environment) less passive, other small cleanups in text about
1192         .cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
1193         (Remote) new MIPS Remote menu entry.
1194
1195 Thu Apr 29 09:36:25 1993  Jim Kingdon  (kingdon@cygnus.com)
1196
1197         * stabs.texinfo: Many changes to include information from the
1198         AIX documentation.
1199
1200         * gdb.texinfo (Environment): Mention pitfall with .cshrc.
1201
1202 Tue Apr 27 14:02:57 1993  Jim Kingdon  (kingdon@cygnus.com)
1203
1204         * gdbint.texinfo (new node Debugging GDB, elsewhere):
1205         Move a bunch of information from ../README.
1206         (Getting Started): New node.
1207
1208 Fri Apr 23 17:21:13 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1209
1210         * gdbinv-s.texi, gdb.texinfo: include Hitachi SH target
1211
1212         * gdb.texinfo: advance manual revision dates to present
1213
1214         * gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
1215         stop using silly Roman numerals in @set variable names
1216
1217 Fri Apr 23 07:30:01 1993  Jim Kingdon  (kingdon@cygnus.com)
1218
1219         * stabs.texinfo (Parameters): Keep trying to get this right.
1220
1221 Wed Apr 21 15:18:47 1993  Jim Kingdon  (kingdon@cygnus.com)
1222
1223         * stabs.texinfo (Parameters): More on "local parameters".
1224
1225 Mon Apr 19 08:00:51 1993  Jim Kingdon  (kingdon@cygnus.com)
1226
1227         * stabs.texinfo (Parameters): Re-do "local parameters" section.
1228
1229 Sun Apr 18 09:47:45 1993  Jim Kingdon  (kingdon@cygnus.com)
1230
1231         * stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
1232         (Parameters): Rewrite.
1233         (xcoff-differences, Sun-differences): Minor changes.
1234
1235 Thu Apr 15 02:35:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)
1236
1237         * stabs.texinfo:  Minor cleanup.
1238
1239 Wed Apr 14 17:31:00 1993  Jim Kingdon  (kingdon@cygnus.com)
1240
1241         * gdbint.texinfo: Minor xcoff stuff.
1242
1243 Wed Apr  7 14:11:07 1993  Fred Fish  (fnf@cygnus.com)
1244
1245         * gdbint.texinfo:  Update for new config directory structure.
1246         Add info about internal type data structures.
1247
1248 Mon Apr  5 09:06:30 1993  Ian Lance Taylor  (ian@cygnus.com)
1249
1250         * Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
1251         $(srcdir).
1252         (gdb-config.texi): Depend on file in $(srcdir).
1253
1254 Fri Apr  2 16:55:13 1993  Jim Kingdon  (kingdon@cygnus.com)
1255
1256         * stabs.texinfo: Fixes about N_SO.
1257
1258 Fri Mar 26 18:00:35 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1259
1260         * gdb.texinfo: include list of nonstandard init file names
1261
1262         * *-config.texi: new switch GENERIC for text that applies *only*
1263         to (usual) multiple-target version of manual
1264
1265         * gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
1266         h8 config
1267
1268         * gdb.texinfo: depend on latest fixed makeinfo, use conditionals
1269         in menus (rather than conditionally selected multiple alternative
1270         menus).
1271
1272         * Makefile.in: define and use DOC_CONFIG var to select
1273         configuration for GDB user manual.
1274
1275         * gdb-config.texi: delete from repository, generate from Makefile.
1276
1277         * all-config.texi: normal `generic' configuration file, formerly
1278         stored as gdb-config.texi
1279
1280 Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1281
1282         * Makefile.in: add dvi target to build all .dvi files
1283
1284 Tue Mar 23 16:03:24 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1285
1286         * gdb.texinfo, gdvinv-s.texinfo: formatting improvements.
1287
1288 Fri Mar 19 21:46:50 1993  John Gilmore  (gnu@cygnus.com)
1289
1290         * gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
1291         host conditionals.
1292         * stabs.texinfo:  More array fixes inspired by Jim's.
1293
1294 Fri Mar 19 10:23:34 1993  Jim Kingdon  (kingdon@cygnus.com)
1295
1296         * stabs.texinfo: Fixes re arrays and continuations.
1297
1298         * gdbint.texinfo: Add XCOFF node.
1299
1300 Mon Mar  8 15:52:18 1993  John Gilmore  (gnu@cygnus.com)
1301
1302         * gdb.texinfo:  Add `set print max-symbolic-offset' doc.
1303
1304 Sun Feb 21 17:09:38 1993  Per Bothner  (bothner@rtl.cygnus.com)
1305
1306         * stabs.texinfo:  Fix for array types to mention lower bounds.
1307
1308 Thu Feb 18 01:19:49 1993  John Gilmore  (gnu@cygnus.com)
1309
1310         * gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.
1311
1312 Wed Feb 17 08:15:24 1993  John Gilmore  (gnu@cygnus.com)
1313
1314         * gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.
1315
1316 Thu Feb 11 10:38:40 1993  John Gilmore  (gnu@cygnus.com)
1317
1318         * gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
1319         by Michael Ben-Gershon <mybg@CS.HUJI.AC.IL>.
1320
1321 Wed Feb 10 23:59:19 1993  John Gilmore  (gnu@cygnus.com)
1322
1323         * gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.
1324
1325 Tue Feb  9 18:26:21 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1326
1327         * gdb.texinfo, gdbinv-s.texi: misc updates
1328
1329 Sat Feb  6 10:25:47 1993  John Gilmore  (gnu@cygnus.com)
1330
1331         * gdbint.texinfo:  Brief documentation for longjmp support,
1332         from an email msg by Stu.
1333
1334 Fri Feb  5 14:10:15 1993  John Gilmore  (gnu@cygnus.com)
1335
1336         * stabs.texinfo:  Fix description of floating point "range"
1337         types (which really define basic types).  Reported by Jim Meehan,
1338         <meehan@src.dec.com>.
1339
1340         * gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.
1341
1342 Thu Feb  4 13:56:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1343
1344         * gdbint.texinfo: Slightly expand section on supporting a new
1345         object file format.
1346
1347 Thu Feb  4 01:49:04 1993  John Gilmore  (gnu@cygnus.com)
1348
1349         * Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
1350         intermediate file.
1351
1352 Tue Feb  2 12:18:06 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1353
1354         * gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups
1355
1356 Mon Feb  1 15:35:47 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1357
1358         * gdbinv-s.texi: z8000 simulator target name is just "sim"
1359
1360         * gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
1361         as well as Z8002.
1362
1363 Sat Nov 28 06:51:35 1992  John Gilmore  (gnu@cygnus.com)
1364
1365         * gdbint.texinfo:  Add sections on clean design and on how to send
1366         in changes.
1367
1368 Mon Nov  9 23:57:02 1992  John Gilmore  (gnu@cygnus.com)
1369
1370         * gdbint.texinfo:  Add how to declare the result of make_cleanup.
1371
1372 Mon Oct 26 11:09:47 1992  John Gilmore  (gnu@cygnus.com)
1373
1374         * gdb.texinfo:  Fix typo, reported by Karl Berry.
1375
1376 Fri Oct 23 00:41:21 1992  John Gilmore  (gnu@cygnus.com)
1377
1378         * gdb.texinfo:  Add opcodes dir to GDB distribution description.
1379
1380 Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1381
1382         * gdbint.texinfo: fixed a stray email address (needs @@),
1383         added @table @code to node "Native Conditionals"
1384
1385 Tue Sep 22 00:34:15 1992  John Gilmore  (gnu@cygnus.com)
1386
1387         * gdbint.texinfo:  Describe coding style of GDB.
1388
1389 Mon Sep 21 19:32:16 1992  John Gilmore  (gnu@cygnus.com)
1390
1391         * stabs.texinfo:  Minor wording changes.
1392
1393 Tue Sep 15 02:57:09 1992  John Gilmore  (gnu@cygnus.com)
1394
1395         * gdbint.texinfo:  Improve release doc slightly.
1396
1397 Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
1398
1399         * gdbint.texinfo:  Improve doc of GDB config macros.
1400
1401 Wed Sep  9 16:52:06 1992  John Gilmore  (gnu@cygnus.com)
1402
1403         * stabs.texinfo:  Remove Bothner's changes for C++ nested types.
1404         These will be reinserted when examined.
1405
1406 Mon Aug 24 01:17:55 1992  John Gilmore  (gnu@cygnus.com)
1407
1408         * gdbint.texinfo:  Make a start at documenting all the #if macros
1409         in GDB.  At least list them all, and start separating them into
1410         host-specific and target-specific.
1411
1412 Tue Aug 18 15:59:13 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1413
1414         * gdbinv-s.m4.in: refrain from using @cartouche for just a few
1415         examples (not consistent w others).
1416         gdb.texinfo: issue disclaimer paragraph on cmdline options only
1417         for generic vn of doc
1418
1419 Tue Aug 18 14:53:27 1992  Ian Lance Taylor  (ian@cygnus.com)
1420
1421         * Makefile.in: always create installation directories.
1422
1423 Tue Aug 18 14:11:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1424
1425         * gdb.texinfo: in h8 config, do not describe searching commands.
1426
1427 Mon Aug 17 18:07:59 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1428
1429         * gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
1430           conditionals; introduce a few generic switches that may be
1431           useful for other cross-dev or dos-hosted configs.
1432
1433         * gdb.texinfo: fix typo in "info reg" description
1434
1435 Sun Aug 16 01:16:18 1992  John Gilmore  (gnu@cygnus.com)
1436
1437         * stabs.texinfo:  Minor updates from running TeX over it.
1438         * Makefile.in (stabs.dvi, stabs.ps):  Add.
1439
1440 Sat Aug 15 20:52:24 1992  Per Bothner  (bothner@rtl.cygnus.com)
1441
1442         * stabs.texinfo:  Stabs documentation, written by Julia Menapace.
1443         First pass at converting it to texinfo.
1444
1445 Sat Aug 15 03:14:59 1992  John Gilmore  (gnu@cygnus.com)
1446
1447         * gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
1448         * Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).
1449
1450 Fri Aug 14 21:08:47 1992  John Gilmore  (gnu@cygnus.com)
1451
1452         * gdbint.texinfo:  Add section on partial symbol tables.
1453
1454 Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)
1455
1456         * gdb.texinfo:  document `set remotedebug' and `set
1457         rstack_high_address'.
1458
1459 Thu May 14 17:09:48 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1460
1461         * gdb.texinfo: slight expansion of new text on reading info files
1462         * gdbinv-s.m4.in: correct and expand info on cross-debugging
1463         H8/300 from DOS.
1464
1465 Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)
1466
1467         * gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.
1468
1469 Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)
1470
1471         * gdb.texinfo:  Say how to read the `info' files.
1472
1473 Tue May  5 12:11:38 1992  K. Richard Pixley  (rich@cygnus.com)
1474
1475         * Makefile.in: gm4 -> m4.
1476
1477 Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)
1478
1479         * gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
1480         Documentation' ahead of `Installing GDB' to match README.
1481         Update shared library doc, -readnow and -mapped, and directory
1482         structure (add glob and mmalloc).  Update configure doc.
1483
1484 Tue Mar 24 23:28:38 1992  K. Richard Pixley  (rich@cygnus.com)
1485
1486         * Makefile.in: remove $(srcdir) from gdb.info rule.
1487
1488 Sat Mar  7 18:44:50 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1489
1490         * Makefile.in: commented out gdb-all.texinfo rule.  This is
1491           temporary.
1492
1493 Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
1494
1495         * Makefile.in, configure.in: removed traces of namesubdir,
1496           -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
1497           copyrights to '92, changed some from Cygnus to FSF.
1498
1499 Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)
1500
1501         * gdb.texinfo:  Improve how we ask for bug reports.
1502
1503 Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1504
1505         * Makefile.in: infodir belongs in datadir.
1506
1507 Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1508
1509         * Makefile.in: remove spaces following hyphens, bsd make can't
1510           cope.  install using INSTALL_DATA.  added clean-info.  added
1511           standards.text support.
1512
1513 Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1514
1515         * Makefile.in: idestdir and ddestdir go away.  Added copyrights
1516           and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
1517           and mandir now keyed off datadir by default.
1518
1519 \f
1520 Local Variables:
1521 mode: indented-text
1522 left-margin: 8
1523 fill-column: 74
1524 version-control: never
1525 End: