gdb/doc/Makefile.in

   1 ##Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002
   2 ##Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 htmldir = $(prefix)/html
  28
  29 SHELL = @SHELL@
  30
  31 LN_S = @LN_S@
  32
  33 INSTALL = @INSTALL@
  34 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  35 INSTALL_DATA = @INSTALL_DATA@
  36
  37 # main GDB source directory
  38 gdbdir = $(srcdir)/..
  39
  40 # where to find texinfo; GDB dist should include a recent one
  41 TEXIDIR=${gdbdir}/../texinfo
  42
  43 # where to find makeinfo, preferably one designed for texinfo-2
  44 MAKEINFO=makeinfo
  45
  46 # Note that texinfo 4.0's makeinfo --html can only generate a
  47 # single file, which would be too large, so continue to use
  48 # texi2html. -sts 2000-03-28
  49
  50 MAKEHTML = texi2html
  51 MAKEHTMLFLAGS = -menu -split_chapter
  52
  53 # where to find texi2roff, ditto
  54 TEXI2ROFF=texi2roff
  55
  56 # where to find texi2dvi, ditto
  57 TEXI2DVI=texi2dvi
  58
  59 # Where is the source dir for the READLINE library doc?
  60 # Traditionally readline is in .. or .
  61 READLINE_DIR = ${gdbdir}/../readline/doc
  62
  63 # The GDB/MI docs come from a sibling directory ../mi
  64 GDBMI_DIR = ${gdbdir}/mi
  65
  66 SET_TEXINPUTS = \
  67    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  68
  69 # Files which should be generated via 'info' and installed by 'install-info'
  70 INFO_DEPS = gdb.info gdbint.info stabs.info
  71
  72 # There may be alternate predefined collections of switches to configure
  73 # the GDB manual.  Normally this is not done in synch with the software
  74 # config system, since this choice tends to be independent; most people
  75 # want a doc config of `all' for a generic manual, regardless of sw config.
  76 DOC_CONFIG = all
  77
  78 # This list of sed edits will edit the GDB reference card
  79 # for what fonts and what papersize to use.
  80 # By default (NO edits applied), the refcard uses:
  81 #    - Computer Modern (CM) fonts
  82 #    - US letter paper (8.5x11in)
  83 # List some of the following files for alternative fonts and paper:
  84 #  a4rc.sed     use A4 paper (297 x 210 mm)
  85 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  86 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  87 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  88 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  89 #      for US, PS fonts:    REFEDITS = psrc.sed
  90 #      for default:
  91 REFEDITS =
  92
  93 # Don Knuth's TeX formatter
  94 TEX = tex
  95
  96 # Program to generate Postscript files from DVI files.
  97 DVIPS = dvips
  98
  99 # Main GDB manual
 100 GDB_DOC_SOURCE_INCLUDES = \
 101         $(srcdir)/annotate.texi \
 102         $(srcdir)/fdl.texi \
 103         $(srcdir)/gpl.texi \
 104         $(GDBMI_DIR)/gdbmi.texinfo \
 105         $(READLINE_DIR)/rluser.texinfo \
 106         $(READLINE_DIR)/inc-hist.texinfo
 107 GDB_DOC_BUILD_INCLUDES = \
 108         gdb-cfg.texi \
 109         GDBvn.texi
 110 GDB_DOC_FILES = \
 111         $(srcdir)/gdb.texinfo \
 112         $(GDB_DOC_SOURCE_INCLUDES) \
 113         $(GDB_DOC_BUILD_INCLUDES)
 114
 115 # Internals Manual
 116 GDBINT_DOC_SOURCE_INCLUDES = \
 117         $(srcdir)/fdl.texi
 118 GDBINT_DOC_BUILD_INCLUDES = \
 119         gdb-cfg.texi \
 120         GDBvn.texi
 121 GDBINT_DOC_FILES = \
 122         $(srcdir)/gdbint.texinfo \
 123         $(GDBINT_DOC_SOURCE_INCLUDES) \
 124         $(GDBINT_DOC_BUILD_INCLUDES)
 125
 126 # Stabs manual: All files
 127 STABS_DOC_SOURCE_INCLUDES =
 128 STABS_DOC_BUILD_INCLUDES =
 129 STABS_DOC_FILES = \
 130         $(srcdir)/stabs.texinfo \
 131         $(STABS_DOC_SOURCE_INCLUDES) \
 132         $(STABS_DOC_BUILD_INCLUDES)
 133
 134 #### Host, target, and site specific Makefile fragments come in here.
 135 ###
 136
 137 all:
 138
 139 info: $(INFO_DEPS)
 140 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
 141 ps: gdb.ps gdbint.ps stabs.ps refcard.ps
 142 html: gdb_toc.html gdbint_toc.html stabs_toc.html
 143 pdf: gdb.pdf gdbint.pdf stabs.pdf
 144 all-doc: info dvi ps # pdf
 145 diststuff: info
 146
 147 install-info: $(INFO_DEPS)
 148         $(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
 149         @list='$(INFO_DEPS)'; \
 150         for file in $$list; do \
 151           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 152           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 153             if test -f $$d/$$ifile; then \
 154               echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
 155               $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
 156             else : ; fi; \
 157           done; \
 158         done
 159         $(POST_INSTALL)
 160         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 161           list='$(INFO_DEPS)'; \
 162           for file in $$list; do \
 163             echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
 164             install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
 165           done; \
 166         else : ; fi
 167
 168 uninstall-info:
 169         $(PRE_UNINSTALL)
 170         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 171           ii=yes; \
 172         else ii=; fi; \
 173         list='$(INFO_DEPS)'; \
 174         for file in $$list; do \
 175           test -z "$$ii" \
 176             || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 177         done
 178         $(NORMAL_UNINSTALL)
 179         list='$(INFO_DEPS)'; \
 180         for file in $$list; do \
 181           (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 182         done
 183
 184 install-html: html
 185         for i in *.html ; do \
 186                 $(INSTALL_DATA) $$i $(htmldir)/$$i ; \
 187         done
 188
 189 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 190
 191 # Copy the object files from a particular stage into a subdirectory.
 192 stage1: force
 193         -mkdir stage1
 194         -mv $(STAGESTUFF) stage1
 195
 196 stage2: force
 197         -mkdir stage2
 198         -mv $(STAGESTUFF) stage2
 199
 200 stage3: force
 201         -mkdir stage3
 202         -mv $(STAGESTUFF) stage3
 203
 204 against=stage2
 205
 206 comparison: force
 207         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 208
 209 de-stage1: force
 210         -(cd stage1 ; mv -f * ..)
 211         -rmdir stage1
 212
 213 de-stage2: force
 214         -(cd stage2 ; mv -f * ..)
 215         -rmdir stage2
 216
 217 de-stage3: force
 218         -(cd stage3 ; mv -f * ..)
 219         -rmdir stage3
 220
 221 # GDB QUICK REFERENCE (dvi output)
 222 refcard.dvi : refcard.tex $(REFEDITS)
 223         echo > tmp.sed
 224         for f in x $(REFEDITS) ; do \
 225                 test x$$f = xx && continue ; \
 226                 cat $(srcdir)/$$f >>tmp.sed ; \
 227         done
 228         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 229         $(SET_TEXINPUTS) $(TEX) sedref.tex
 230         mv sedref.dvi refcard.dvi
 231         rm -f sedref.log sedref.tex tmp.sed
 232
 233 refcard.ps : refcard.dvi
 234         $(DVIPS) -t landscape -o $@ $?
 235
 236 # File to record current GDB version number (copied from main dir version.in)
 237 GDBvn.texi : ${gdbdir}/version.in
 238         echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 239         mv GDBvn.new GDBvn.texi
 240
 241 # Updated atomically
 242 .PRECIOUS: GDBvn.texi
 243
 244 # Choose configuration for GDB manual (normally `all'; normally not tied into
 245 # `configure' script because most users prefer generic version of manual,
 246 # not one for their binary config---which may not be specifically
 247 # defined anyways).
 248 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 249         (test "$$LN_S" = "ln -s" && \
 250           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 251         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 252         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 253
 254 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 255 # If your texinfo or makeinfo don't support these, get a new texinfo release
 256 #
 257 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 258 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 259 #   source directory for the benefit of people who *don't* use this makefile,
 260 #   VPATH will often tell make not to bother building it, because the one
 261 #   in the srcdir is up to date.  (if not, then make should build one here).
 262
 263 # Clean these up before each run.  Avoids a catch 22 with not being
 264 # able to re-generate these files (to fix a corruption) because these
 265 # files contain a corruption.
 266 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 267         gdb.tp* gdb.vr*
 268
 269 # GDB MANUAL: TeX dvi file
 270 gdb.dvi: ${GDB_DOC_FILES}
 271         if [ ! -f ./GDBvn.texi ]; then \
 272                 (test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 273                 ln $(srcdir)/GDBvn.texi . || \
 274                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 275         rm -f $(GDB_TEX_TMPS)
 276         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
 277
 278 gdb.ps: gdb.dvi
 279         $(DVIPS) -o $@ $?
 280
 281 gdb.pdf: ${GDB_DOC_FILES}
 282         if [ ! -f ./GDBvn.texi ]; then \
 283                 (test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 284                 ln $(srcdir)/GDBvn.texi . || \
 285                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 286         rm -f $(GDB_TEX_TMPS)
 287         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
 288
 289 # GDB MANUAL: info file
 290 gdb.info: ${GDB_DOC_FILES}
 291         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 292                 -o gdb.info $(srcdir)/gdb.texinfo
 293
 294 # GDB MANUAL: roff translations
 295 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 296 # If you want an index, see texi2roff doc for postprocessing
 297 # and add -i to texi2roff invocations below.
 298 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 299 #    corresponding -e lines when later texi2roff's are current)
 300 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 301 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 302 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 303 # + @alphaenumerate is ridiculously new, turned into @enumerate
 304
 305 # texi2roff doesn't have a notion of include dirs, so we have to fake
 306 # it out for gdb manual's include files---but only if not configured
 307 # in main sourcedir.
 308 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 309         if [ ! -f gdb.texinfo ]; then \
 310                 (test "$$LN_S" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 311                 ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 312                 cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 313         fi
 314         touch links2roff
 315
 316 # gdb manual suitable for [gtn]roff -me
 317 gdb.me: $(GDB_DOC_FILES) links2roff
 318         sed -e '/\\input texinfo/d' \
 319                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 320                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 321                 -e '/^@c /d' \
 322                 -e 's/{.*,,/{/' \
 323                 -e 's/@ / /g' \
 324                 -e 's/^@alphaenumerate/@enumerate/g' \
 325                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 326                 $(srcdir)/gdb.texinfo | \
 327         $(TEXI2ROFF) -me | \
 328         sed -e 's/---/\\(em/g' \
 329         >gdb.me
 330
 331 # gdb manual suitable for [gtn]roff -ms
 332 gdb.ms: $(GDB_DOC_FILES) links2roff
 333         sed -e '/\\input texinfo/d' \
 334                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 335                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 336                 -e '/^@c /d' \
 337                 -e 's/{.*,,/{/' \
 338                 -e 's/@ / /g' \
 339                 -e 's/^@alphaenumerate/@enumerate/g' \
 340                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 341                 $(srcdir)/gdb.texinfo | \
 342         $(TEXI2ROFF) -ms | \
 343         sed -e 's/---/\\(em/g' \
 344         >gdb.ms
 345
 346 # gdb manual suitable for [tn]roff -mm
 347 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 348 #   try leaving them in
 349 gdb.mm: $(GDB_DOC_FILES) links2roff
 350         sed -e '/\\input texinfo/d' \
 351                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 352                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 353                 -e '/^@c /d' \
 354                 -e 's/{.*,,/{/' \
 355                 -e '/@noindent/d' \
 356                 -e 's/@ / /g' \
 357                 -e 's/^@alphaenumerate/@enumerate/g' \
 358                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 359                 $(srcdir)/gdb.texinfo | \
 360         $(TEXI2ROFF) -mm | \
 361         sed -e 's/---/\\(em/g' \
 362         >gdb.mm
 363
 364 # GDB MANUAL: HTML file
 365
 366 gdb_toc.html: ${GDB_DOC_FILES}
 367         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 368
 369 # Clean these up before each run.  Avoids a catch 22 with not being
 370 # able to re-generate these files (to fix a corruption) because these
 371 # files contain a corruption.
 372 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 373         gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 374
 375 # GDB INTERNALS MANUAL: TeX dvi file
 376 gdbint.dvi: $(GDBINT_DOC_FILES)
 377         rm -f $(GDBINT_TEX_TMPS)
 378         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
 379
 380 gdbint.ps : gdbint.dvi
 381         $(DVIPS) -o $@ $?
 382
 383 gdbint.pdf: $(GDBINT_DOC_FILES)
 384         rm -f $(GDBINT_TEX_TMPS)
 385         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
 386
 387 # GDB INTERNALS MANUAL: info file
 388
 389 gdbint.info: $(GDBINT_DOC_FILES)
 390         $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
 391
 392 # GDB INTERNALS MANUAL: HTML file
 393
 394 gdbint_toc.html: $(GDBINT_DOC_FILES)
 395         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 396
 397 stabs.info: $(STABS_DOC_FILES)
 398         $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
 399
 400 # STABS DOCUMENTATION: HTML file
 401
 402 stabs_toc.html: $(STABS_DOC_FILES)
 403         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 404
 405 # Clean these up before each run.  Avoids a catch 22 with not being
 406 # able to re-generate these files (to fix a corruption) because these
 407 # files contain a corruption.
 408 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 409         stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 410
 411 # STABS DOCUMENTATION: TeX dvi file
 412 stabs.dvi : $(STABS_DOC_FILES)
 413         rm -f $(STABS_TEX_TMPS)
 414         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
 415
 416 stabs.ps: stabs.dvi
 417         $(DVIPS) -o $@ $?
 418
 419 stabs.pdf: $(STABS_DOC_FILES)
 420         rm -f $(STABS_TEX_TMPS)
 421         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
 422
 423 force:
 424
 425 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 426         $(SHELL) ./config.status
 427
 428
 429 # The "least clean" level of cleaning.  Get rid of files which are
 430 # automatically generated files that are just intermediate files,
 431
 432 mostlyclean:
 433         rm -f gdb.mm gdb.ms gdb.me links2roff
 434         rm -f $(GDB_TEX_TMPS)
 435         rm -f $(GDBINT_TEX_TMPS)
 436         rm -f $(STABS_TEX_TMPS)
 437         rm -f sedref.dvi sedref.tex tmp.sed
 438
 439 clean: mostlyclean
 440         rm -f gdb-cfg.texi
 441
 442 distclean: clean
 443         rm -f Makefile config.status config.log
 444
 445 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 446 # are all part of the distribution, so it should not be removed by
 447 # "clean" or "distclean".  Use maintainer-clean to remove them.
 448
 449 maintainer-clean realclean: distclean
 450         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 451
 452 install: install-info
 453
 454 uninstall: uninstall-info