gdb/doc/Makefile.in

   1 ##Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000
   2 ##Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 htmldir = $(prefix)/html
  28
  29 SHELL = @SHELL@
  30
  31 LN_S = @LN_S@
  32
  33 INSTALL = @INSTALL@
  34 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  35 INSTALL_DATA = @INSTALL_DATA@
  36
  37 # main GDB source directory
  38 gdbdir = $(srcdir)/..
  39
  40 # where to find texinfo; GDB dist should include a recent one
  41 TEXIDIR=${gdbdir}/../texinfo
  42
  43 # where to find makeinfo, preferably one designed for texinfo-2
  44 MAKEINFO=makeinfo
  45
  46 # Note that texinfo 4.0's makeinfo --html can only generate a
  47 # single file, which would be too large, so continue to use
  48 # texi2html. -sts 2000-03-28
  49
  50 MAKEHTML = texi2html
  51 MAKEHTMLFLAGS = -menu -split_chapter
  52
  53 # where to find texi2roff, ditto
  54 TEXI2ROFF=texi2roff
  55
  56 # Where is the source dir for the READLINE library doc?
  57 # Traditionally readline is in .. or .
  58 READLINE_DIR = ${gdbdir}/../readline/doc
  59
  60 # The GDB/MI docs come from a sibling directory ../mi
  61 GDBMI_DIR = ${gdbdir}/mi
  62
  63 SET_TEXINPUTS = \
  64    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  65
  66 # Files which should be generated via 'info' and installed by 'install-info'
  67 INFO_DEPS = gdb.info gdbint.info stabs.info
  68
  69 # There may be alternate predefined collections of switches to configure
  70 # the GDB manual.  Normally this is not done in synch with the software
  71 # config system, since this choice tends to be independent; most people
  72 # want a doc config of `all' for a generic manual, regardless of sw config.
  73 DOC_CONFIG = all
  74
  75 # This list of sed edits will edit the GDB reference card
  76 # for what fonts and what papersize to use.
  77 # By default (NO edits applied), the refcard uses:
  78 #    - Computer Modern (CM) fonts
  79 #    - US letter paper (8.5x11in)
  80 # List some of the following files for alternative fonts and paper:
  81 #  a4rc.sed     use A4 paper (297 x 210 mm)
  82 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  83 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  84 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  85 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  86 #      for US, PS fonts:    REFEDITS = psrc.sed
  87 #      for default:
  88 REFEDITS =
  89
  90 # Don Knuth's TeX formatter
  91 TEX = tex
  92
  93 # auxiliary program for sorting Texinfo indices
  94 TEXINDEX = texindex
  95
  96 # Program to generate Postscript files from DVI files.
  97 DVIPS = dvips
  98
  99 # Program to generate PDF files from tex files.
 100 PDFTEX = pdftex
 101
 102 # Main GDB manual's source files
 103 SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/annotate.texi
 104
 105 SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
 106
 107 SFILES_DOC = $(SFILES_LOCAL) $(GDBMI_DIR)/gdbmi.texinfo \
 108                 $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texinfo
 109
 110 #### Host, target, and site specific Makefile fragments come in here.
 111 ###
 112
 113 all install:
 114
 115 info: $(INFO_DEPS)
 116 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
 117 ps: gdb.ps gdbint.ps stabs.ps refcard.ps
 118 html: gdb_toc.html gdbint_toc.html stabs_toc.html
 119 pdf: gdb.pdf gdbint.pdf stabs.pdf
 120 all-doc: info dvi ps # pdf
 121 diststuff: info
 122
 123 install-info: $(INFO_DEPS)
 124         $(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
 125         @list='$(INFO_DEPS)'; \
 126         for file in $$list; do \
 127           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 128           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 129             if test -f $$d/$$ifile; then \
 130               echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
 131               $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
 132             else : ; fi; \
 133           done; \
 134         done
 135         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 136           list='$(INFO_DEPS)'; \
 137           for file in $$list; do \
 138             echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
 139             install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
 140           done; \
 141         else : ; fi
 142
 143 install-html: html
 144         for i in *.html ; do \
 145                 $(INSTALL_DATA) $$i $(htmldir)/$$i ; \
 146         done
 147
 148 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 149
 150 # Copy the object files from a particular stage into a subdirectory.
 151 stage1: force
 152         -mkdir stage1
 153         -mv $(STAGESTUFF) stage1
 154
 155 stage2: force
 156         -mkdir stage2
 157         -mv $(STAGESTUFF) stage2
 158
 159 stage3: force
 160         -mkdir stage3
 161         -mv $(STAGESTUFF) stage3
 162
 163 against=stage2
 164
 165 comparison: force
 166         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 167
 168 de-stage1: force
 169         -(cd stage1 ; mv -f * ..)
 170         -rmdir stage1
 171
 172 de-stage2: force
 173         -(cd stage2 ; mv -f * ..)
 174         -rmdir stage2
 175
 176 de-stage3: force
 177         -(cd stage3 ; mv -f * ..)
 178         -rmdir stage3
 179
 180 # The "least clean" level of cleaning.  Get rid of files which are
 181 # automatically generated files that are just intermediate files,
 182 #
 183 mostlyclean:
 184         rm -f gdb.mm gdb.ms gdb.me links2roff
 185         rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
 186         rm -f sedref.dvi sedref.tex tmp.sed
 187
 188 clean: mostlyclean
 189         rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
 190
 191 distclean: clean
 192         rm -f Makefile config.status
 193
 194 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 195 # are all part of the distribution, so it should not be removed by
 196 # "clean" or "distclean".  Use maintainer-clean to remove them.
 197
 198 maintainer-clean realclean: distclean
 199         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 200
 201 # GDB QUICK REFERENCE (dvi output)
 202 refcard.dvi : refcard.tex $(REFEDITS)
 203         echo > tmp.sed
 204         for f in x $(REFEDITS) ; do \
 205                 test x$$f = xx && continue ; \
 206                 cat $(srcdir)/$$f >>tmp.sed ; \
 207         done
 208         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 209         $(SET_TEXINPUTS) $(TEX) sedref.tex
 210         mv sedref.dvi refcard.dvi
 211         rm -f sedref.log sedref.tex tmp.sed
 212
 213 refcard.ps : refcard.dvi
 214         $(DVIPS) -t landscape -o $@ $?
 215
 216 # File to record current GDB version number (copied from main dir version.in)
 217 GDBvn.texi : ${gdbdir}/version.in
 218         echo "@set GDBVN `head -1 $(srcdir)/../version.in`" > ./GDBvn.new
 219         mv GDBvn.new GDBvn.texi
 220
 221 # Updated atomically
 222 .PRECIOUS: GDBvn.texi
 223
 224 # Choose configuration for GDB manual (normally `all'; normally not tied into
 225 # `configure' script because most users prefer generic version of manual,
 226 # not one for their binary config---which may not be specifically
 227 # defined anyways).
 228 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 229         (test "$$LN_S" = "ln -s" && \
 230           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 231         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 232         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 233
 234 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 235 # If your texinfo or makeinfo don't support these, get a new texinfo release
 236 #
 237 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 238 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 239 #   source directory for the benefit of people who *don't* use this makefile,
 240 #   VPATH will often tell make not to bother building it, because the one
 241 #   in the srcdir is up to date.  (if not, then make should build one here).
 242
 243 # GDB MANUAL: TeX dvi file
 244 gdb.dvi: ${SFILES_DOC}
 245         if [ ! -f ./GDBvn.texi ]; then \
 246                 (test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 247                 ln $(srcdir)/GDBvn.texi . || \
 248                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 249         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 250         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 251         $(TEXINDEX) gdb.??
 252         $(SET_TEXINPUTS) $(TEX) gdb.texinfo
 253         rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 254                 gdb.tp* gdb.vr*
 255
 256 gdb.ps: gdb.dvi
 257         $(DVIPS) -o $@ $?
 258
 259 gdb.pdf: ${SFILES_DOC}
 260         if [ ! -f ./GDBvn.texi ]; then \
 261                 (test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 262                 ln $(srcdir)/GDBvn.texi . || \
 263                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 264         $(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
 265         $(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
 266         $(TEXINDEX) gdb.??
 267         $(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
 268         rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 269                 gdb.tp* gdb.vr*
 270
 271 # GDB MANUAL: info file
 272 # We're using texinfo 3.12; older makeinfo's may not be able to
 273 # cope with all the markup.
 274 gdb.info: ${SFILES_DOC}
 275         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
 276
 277 # GDB MANUAL: roff translations
 278 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 279 # If you want an index, see texi2roff doc for postprocessing
 280 # and add -i to texi2roff invocations below.
 281 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 282 #    corresponding -e lines when later texi2roff's are current)
 283 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 284 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 285 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 286 # + @alphaenumerate is ridiculously new, turned into @enumerate
 287
 288 # texi2roff doesn't have a notion of include dirs, so we have to fake
 289 # it out for gdb manual's include files---but only if not configured
 290 # in main sourcedir.
 291 links2roff: $(SFILES_INCLUDED)
 292         if [ ! -f gdb.texinfo ]; then \
 293                 (test "$$LN_S" = "ln -s" && ln -s $(SFILES_INCLUDED) .) || \
 294                 ln $(SFILES_INCLUDED)    . || \
 295                 cp $(SFILES_INCLUDED)    . ; \
 296         fi
 297         touch links2roff
 298
 299 #  "Readline" appendices.  Get them also due to lack of includes,
 300 # regardless of whether or not configuring in main sourcedir.
 301 # @ftable removed due to bug in texi2roff-2; if your texi2roff
 302 # is newer, try just ln or cp
 303 rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
 304                 sed -e 's/^@ftable/@table/g' \
 305                 -e 's/^@end ftable/@end table/g' \
 306                 ${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
 307
 308 inc-hist.texinfo: ${READLINE_DIR}/inc-hist.texinfo
 309         (test "$$LN_S" = "ln -s" && \
 310          ln -s ${READLINE_DIR}/inc-hist.texinfo .) || \
 311         ln ${READLINE_DIR}/inc-hist.texinfo . || \
 312         cp ${READLINE_DIR}/inc-hist.texinfo .
 313
 314 gdbmi.texinfo: ${GDBMI_DIR}/gdbmi.texinfo
 315         (test "$$LN_S" = "ln -s" && \
 316          ln -s ${GDBMI_DIR}/gdbmi.texinfo .) || \
 317         ln ${GDBMI_DIR}/gdbmi.texinfo . || \
 318         cp ${GDBMI_DIR}/gdbmi.texinfo .
 319
 320 # gdb manual suitable for [gtn]roff -me
 321 gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 322         sed -e '/\\input texinfo/d' \
 323                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 324                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 325                 -e '/^@c /d' \
 326                 -e 's/{.*,,/{/' \
 327                 -e 's/@ / /g' \
 328                 -e 's/^@alphaenumerate/@enumerate/g' \
 329                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 330                 $(srcdir)/gdb.texinfo | \
 331         $(TEXI2ROFF) -me | \
 332         sed -e 's/---/\\(em/g' \
 333         >gdb.me
 334
 335 # gdb manual suitable for [gtn]roff -ms
 336 gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 337         sed -e '/\\input texinfo/d' \
 338                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 339                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 340                 -e '/^@c /d' \
 341                 -e 's/{.*,,/{/' \
 342                 -e 's/@ / /g' \
 343                 -e 's/^@alphaenumerate/@enumerate/g' \
 344                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 345                 $(srcdir)/gdb.texinfo | \
 346         $(TEXI2ROFF) -ms | \
 347         sed -e 's/---/\\(em/g' \
 348         >gdb.ms
 349
 350 # gdb manual suitable for [tn]roff -mm
 351 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 352 #   try leaving them in
 353 gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
 354         sed -e '/\\input texinfo/d' \
 355                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 356                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 357                 -e '/^@c /d' \
 358                 -e 's/{.*,,/{/' \
 359                 -e '/@noindent/d' \
 360                 -e 's/@ / /g' \
 361                 -e 's/^@alphaenumerate/@enumerate/g' \
 362                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 363                 $(srcdir)/gdb.texinfo | \
 364         $(TEXI2ROFF) -mm | \
 365         sed -e 's/---/\\(em/g' \
 366         >gdb.mm
 367
 368 # GDB MANUAL: HTML file
 369
 370 gdb_toc.html: ${SFILES_DOC}
 371         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 372
 373 # GDB INTERNALS MANUAL: TeX dvi file
 374 gdbint.dvi : gdbint.texinfo
 375         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 376         $(TEXINDEX) gdbint.??
 377         $(SET_TEXINPUTS) $(TEX) gdbint.texinfo
 378         rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 379                 gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 380
 381 gdbint.ps : gdbint.dvi
 382         $(DVIPS) -o $@ $?
 383
 384 gdbint.pdf: gdbint.dvi
 385         $(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
 386         $(TEXINDEX) gdbint.??
 387         $(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
 388         rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 389                 gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 390
 391 # GDB INTERNALS MANUAL: info file
 392
 393 gdbint.info: gdbint.texinfo
 394         $(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
 395
 396 # GDB INTERNALS MANUAL: HTML file
 397
 398 gdbint_toc.html: gdbint.texinfo
 399         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 400
 401 stabs.info: stabs.texinfo
 402         $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
 403
 404 # STABS DOCUMENTATION: HTML file
 405
 406 stabs_toc.html: stabs.texinfo
 407         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 408
 409 # STABS DOCUMENTATION: TeX dvi file
 410 stabs.dvi : stabs.texinfo
 411         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 412         $(TEXINDEX) stabs.??
 413         $(SET_TEXINPUTS) $(TEX) stabs.texinfo
 414         rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 415                 stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 416
 417 stabs.ps: stabs.dvi
 418         $(DVIPS) -o $@ $?
 419
 420 stabs.pdf: stabs.dvi
 421         $(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
 422         $(TEXINDEX) stabs.??
 423         $(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
 424         rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 425                 stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 426
 427 force:
 428
 429 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 430         $(SHELL) ./config.status