gdb/testsuite/gdb.base/call-ar-st.exp

   1 #   Copyright 1998-2013 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15
  16 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
  17
  18
  19
  20 standard_testfile
  21
  22 # Test depends on printf, which the sparclet stub doesn't support.
  23 if { [istarget "sparclet-*-*"] } {
  24     return 0
  25 }
  26
  27 # Some targets can't call functions, so don't even bother with this
  28 # test.
  29 if [target_info exists gdb,cannot_call_functions] {
  30     setup_xfail "*-*-*" 2416
  31     fail "This target can not call functions"
  32     continue
  33 }
  34
  35 # Create and source the file that provides information about the compiler
  36 # used to compile the test case.
  37
  38 if [get_compiler_info] {
  39     return -1
  40 }
  41
  42 if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
  43     untested $testfile.exp
  44     return -1
  45 }
  46
  47
  48 set oldtimeout $timeout
  49 set timeout [expr "$timeout + 60"]
  50
  51 gdb_test_no_output "set print sevenbit-strings"
  52 gdb_test_no_output "set print address off"
  53 gdb_test_no_output "set width 0"
  54
  55
  56 if ![runto_main] then {
  57     perror "couldn't run to breakpoint"
  58     continue
  59 }
  60
  61 get_debug_format
  62
  63 #go -until 1209
  64 gdb_test "tbreak 1209" \
  65     "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
  66     "tbreakpoint line 1209"
  67
  68 gdb_test continue \
  69 "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
  70 "run until breakpoint set at a line"
  71
  72
  73 #call print_double_array(double_array)
  74 if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
  75     ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
  76     gdb_test_sequence "print print_double_array(double_array)" "" {
  77         "\[ \t\r\n\]+array_d :"
  78         "\[ \t\r\n\]+========="
  79         "\[ \t\r\n\]+0.000000"
  80         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]"
  81         "\[ \t\r\n\]+"
  82     }
  83 }
  84
  85 #call print_char_array(char_array)
  86
  87 if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
  88     gdb_test_sequence "print print_char_array(char_array)" "" {
  89         "\[ \t\r\n\]+array_c :"
  90         "\[ \t\r\n\]+========="
  91         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
  92         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
  93         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
  94         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
  95     }
  96 }
  97
  98 #go -until 1216
  99 gdb_test "tbreak 1216" \
 100 "Temporary breakpoint.*file.*$srcfile, line 1216.*" \
 101 "tbreakpoint line 1216"
 102
 103 if ![gdb_skip_stdio_test "continue to 1216"] {
 104     gdb_test_sequence "continue" "continue to 1216" {
 105         "\[ \t\r\n\]+array_c :"
 106         "\[ \t\r\n\]+========="
 107         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
 108         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 109         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 110         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
 111         "\[ \t\r\n\]+main.*at.*:1216"
 112         "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
 113     }
 114 } else {
 115     gdb_test "continue" ".*" ""
 116 }
 117
 118 # I am disabling this test, because it takes too long. I verified by
 119 # hand that it works, feel free to check for yourself.
 120 #call print_all_arrays(integer_array, char_array, float_array, double_array)
 121 #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
 122 #gdb_expect {
 123 #    -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1  -2  -3  -4  -5  -6  -7  -8\[ \t\r\n\]+-9  -10  -11  -12  -13  -14  -15  -16\[ \t\r\n\]+-17  -18  -19  -20  -21  -22  -23  -24\[ \t\r\n\]+-25  -26  -27  -28  -29  -30  -31  -32\[ \t\r\n\]+-33  -34  -35  -36  -37  -38  -39  -40\[ \t\r\n\]+-41  -42  -43  -44  -45  -46  -47  -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450  0.284900  0.427350  0.569801  0.712251  0.854701  0.997151  1.139601\[ \t\r\n\]+1.282051  1.424501  1.566952  1.709402  1.851852  1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.41750  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300.*$gdb_prompt $" {
 124 #        pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
 125 #   }
 126 #    -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 127 #    timeout           { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 128 #  }
 129
 130 #set timeout $oldtimeout
 131 #go -until 1220
 132 gdb_test "tbreak 1220" \
 133         "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
 134         "tbreakpoint line 1220"
 135
 136 if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
 137     ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
 138     gdb_test_sequence "continue" "continuing to breakpoint 1220" {
 139         "Continuing\\."
 140         "\[ \t\r\n\]+array_d :"
 141         "\[ \t\r\n\]+========="
 142         "\[ \t\r\n\]+0.000000"
 143         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 144         "\[ \t\r\n\]+"
 145         "array_f :"
 146         "student id :\[\t \]+.*YELLOW"
 147         "array_i :"
 148         "main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
 149     }
 150 } else {
 151     gdb_test "continue" ".*" ""
 152 }
 153
 154 #step
 155 gdb_test "step" \
 156     "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \
 157     "step inside print_all_arrays"
 158
 159 #step -over
 160 if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
 161     gdb_test "next" \
 162         "array_i :.*307.*print_char_array.*" \
 163         "next over print_int_array in print-all_arrays"
 164 } else {
 165     gdb_test "next" ".*" ""
 166 }
 167
 168 #call print_double_array(array_d)
 169 if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
 170     ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
 171     gdb_test_sequence "print print_double_array(array_d)" "" {
 172         "array_d :"
 173         "\[ \t\r\n\]+========="
 174         "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
 175         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 176         "\[ \t\r\n\]+"
 177     }
 178 }
 179
 180 #go -until 1236
 181 gdb_test "tbreak 1236" \
 182 "Temporary breakpoint.* file .*$srcfile, line 1236.*" \
 183 "tbreakpoint line 1236"
 184
 185 if {![gdb_skip_float_test "continuing to 1236"] && \
 186     ![gdb_skip_stdio_test "continuing to 1236"] } {
 187     gdb_test_sequence "continue" "continuing to 1236" {
 188         "Continuing\\..*array_c"
 189         "array_f"
 190         "\[ \t\r\n\]+array_d :"
 191         "\[ \t\r\n\]+========="
 192         "\[ \t\r\n\]+0.000000"
 193         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 194         "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
 195     }
 196 } else {
 197     gdb_test "continue" ".*" ""
 198 }
 199
 200
 201 #call sum_array_print(10, *list1, *list2, *list3, *list4)
 202
 203 if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
 204     gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
 205         ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \
 206         "print sum_array_print(10, *list1, *list2, *list3, *list4)"
 207 }
 208
 209 #step over
 210 if ![gdb_skip_stdio_test "next to 1237"] {
 211     gdb_test "next" \
 212         "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
 213         "next to 1237"
 214 } else {
 215     gdb_test "next" ".*" ""
 216 }
 217
 218 #call print_array_rep(\*list1, \*list2, \*list3)
 219
 220 if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
 221     gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \
 222         "Contents of linked list3:.*" \
 223         "print print_array_rep(*list1, *list2, *list3)"
 224 }
 225
 226 #go -until 1241
 227 gdb_test "tbreak 1241" \
 228     "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
 229     "tbreakpoint line 1241"
 230
 231 gdb_test "continue" \
 232     "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
 233     "continue to 1241"
 234
 235
 236 # Run into sum_array_print, and verify that the arguments were passed
 237 # accurately.
 238 #
 239 # Note that we shouldn't use a `step' here to get into
 240 # sum_array_print; GCC may emit calls to memcpy to put the arguments
 241 # in the right place, and a step may end up in memcpy instead.  This
 242 # may itself be a bug, but it's not the one we're trying to catch
 243 # here.  I've added something to step-test.exp for this.
 244 gdb_test "break sum_array_print" \
 245         ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
 246         "set breakpoint in sum_array_print"
 247 gdb_test_no_output "set print frame-arguments all"
 248 gdb_test "continue" \
 249         ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
 250         "check args of sum_array_print"
 251
 252 #call print_array_rep(linked_list1, linked_list2, linked_list3)
 253 # this calls works from gdb without gdb_expect. But it does seem to hang
 254 #from within gdb_expect.
 255 #I comment this out
 256 #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
 257 #gdb_expect {
 258 #    -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
 259 #        pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
 260 #      }
 261 #    -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 262 #    timeout           { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 263 #}
 264
 265
 266 #go -until 1281
 267 gdb_test "tbreak 1281" \
 268     "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
 269     "tbreakpoint line 1281"
 270
 271 if ![gdb_skip_stdio_test "continuing to 1281"] {
 272     gdb_test "continue" \
 273         "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \
 274         "continue to 1281"
 275 } else {
 276     gdb_test "continue" ".*" ""
 277 }
 278
 279 #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
 280 #                         *flags, *flags_combo, *three_char, *five_char,
 281 #                         *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 282
 283 if {![gdb_skip_float_test "print print_small_structs(...)"] && \
 284     ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
 285     gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" {
 286         "\[\t\r\n \]+alpha"
 287         "\[\t\r\n \]+gamma"
 288         "\[\t\r\n \]+epsilon"
 289         "\[\t\r\n \]+alpha"
 290         "\[\t\r\n \]+gamma"
 291         "\[\t\r\n \]+epsilon"
 292         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 293         "\[\t\r\n \]+Contents of three_char_t:"
 294         "\[\t\r\n \]+a[ \t]*b[ \t]*c"
 295         "\[\t\r\n \]+Contents of five_char_t:"
 296         "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
 297         "\[\t\r\n \]+Contents of int_char_combo_t:"
 298         "\[\t\r\n \]+123[ \t]*z"
 299         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 300         "\[\t\r\n \]+52"
 301         "\[\t\r\n \]+Contents of struct1:"
 302         "\[\t\r\n \]+6[ \t]*0"
 303         "\[\t\r\n \]+Contents of struct2:"
 304         "\[\t\r\n \]+10[ \t]*0"
 305         "\[\t\r\n \]+Contents of struct3:"
 306         "\[\t\r\n \]+12[ \t]*0"
 307         "\[\t\r\n \]+Contents of one_double_t:"
 308         "\[\t\r\n \]+10.500000"
 309         "\[\t\r\n \]+Contents of one_double_t:"
 310         "\[\t\r\n \]+-3.375000"
 311         "\[\t\r\n \]+Contents of one_double_t:"
 312         "\[\t\r\n \]+675.093750"
 313         "\[\t\r\n \]+Contents of two_floats_t:"
 314         "\[\t\r\n \]+45.234001[ \t]*43.599998"
 315         "\[\t\r\n \]+Contents of two_floats_t:"
 316         "\[\t\r\n \]+78.010002[ \t]*122.099998"
 317         "\[\t\r\n \]+Contents of two_floats_t:"
 318         "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
 319     }
 320 }
 321
 322 #call compute_with_small_structs(20)
 323 gdb_test "print compute_with_small_structs(20)" \
 324     "\[0-9\]+ = void" \
 325     "print compute_with_small_structs(20)"
 326
 327
 328 #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
 329 #                       3.14, -5678.12345, -0.11111111, 216.97065)
 330
 331 if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
 332     ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
 333     gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" {
 334         "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
 335         "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
 336         "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
 337         "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
 338         "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
 339     }
 340 }
 341
 342 #go -until 1286
 343 gdb_test "tbreak 1286" \
 344     "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
 345     "tbreakpoint line 1286"
 346
 347 gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
 348
 349 if { [istarget "hppa*-*-hpux*"] } {
 350     #
 351     # NOTE:(FIXME)
 352     # the aCC demangler cannot demangle the name of a function with >10 args.
 353     # so I added a .* after the name of the function, to match the
 354     # incredibly long mangled name
 355     # (getting aCC's libdemangle.a bundled w/ the system?)
 356     # DTS CLLbs16994  coulter 990114
 357     #
 358     # FIXME: use step for hppa* testing for now
 359     # guo 990621
 360     #
 361     gdb_test "step" \
 362         "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \
 363         "step into print_long_arg_list"
 364 } else {
 365
 366     # We can't just assume that a "step" will get us into
 367     # print_long_arg_list here,either.
 368     gdb_test "tbreak print_long_arg_list" \
 369         "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
 370         "tbreak in print_long_arg_list after stepping into memcpy"
 371     # The short match case below handles cases where a buffer
 372     # overflows or something, and expect can't deal with the full
 373     # line.  Perhaps a more elegant solution exists... -sts 1999-08-17
 374     if {![gdb_skip_float_test "step into print_long_arg_list"]} {
 375         gdb_test_multiple "continue" "step into print_long_arg_list" {
 376             -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
 377                 pass "step into print_long_arg_list"
 378             }
 379             -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
 380                 pass "step into print_long_arg_list (short match)"
 381             }
 382         }
 383     } else {
 384         # If skipping float tests, don't expect anything in arg list.
 385         gdb_test "continue" \
 386             "print_long_arg_list \\(.*\\).*" \
 387             "step into print_long_arg_list"
 388     }
 389 }
 390
 391 set ws "\[\n\r\t \]+"
 392
 393 #call print_small_structs(struct1, struct2, struct3, struct4, flags,
 394 #                         flags_combo, three_char, five_char, int_char_combo,
 395 #                         d1, d2, d3, f1, f2, f3)
 396
 397 if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
 398     ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
 399
 400     # On 32-bit SPARC, some of the args are passed by ref, others by
 401     # value, and GDB gets confused and says "Invalid cast" because it
 402     # thinks it has to cast the structure into a pointer to structure.
 403     if { [test_debug_format "stabs"] } then {
 404         setup_kfail "gdb/1539" "sparc-*-*"
 405     }
 406
 407     gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" {
 408         "\[\t\r\n \]+alpha"
 409         "\[\t\r\n \]+gamma"
 410         "\[\t\r\n \]+epsilon"
 411         "\[\t\r\n \]+alpha"
 412         "\[\t\r\n \]+gamma"
 413         "\[\t\r\n \]+epsilon"
 414         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 415         "\[\t\r\n \]+Contents of three_char_t:"
 416         "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
 417         "\[\t\r\n \]+Contents of five_char_t:"
 418         "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
 419         "\[\t\r\n \]+Contents of int_char_combo_t:"
 420         "\[\t\r\n \]+123\[ \t\]*z"
 421         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 422         "\[\t\r\n \]+52"
 423         "\[\t\r\n \]+Contents of struct1:"
 424         "\[\t\r\n \]+6\[ \t\]*0"
 425         "\[\t\r\n \]+Contents of struct2:"
 426         "\[\t\r\n \]+10\[ \t\]*0"
 427         "\[\t\r\n \]+Contents of struct3:"
 428         "\[\t\r\n \]+12\[ \t\]*0"
 429         "\[\t\r\n \]+Contents of one_double_t:"
 430         "\[\t\r\n \]+10.500000"
 431         "\[\t\r\n \]+Contents of one_double_t:"
 432         "\[\t\r\n \]+-3.375000"
 433         "\[\t\r\n \]+Contents of one_double_t:"
 434         "\[\t\r\n \]+675.093750"
 435         "\[\t\r\n \]+Contents of two_floats_t:"
 436         "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
 437         "\[\t\r\n \]+Contents of two_floats_t:"
 438         "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
 439         "\[\t\r\n \]+Contents of two_floats_t:"
 440         "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
 441     }
 442 }
 443
 444
 445 #go -until 1300
 446 gdb_test "tbreak 1300" \
 447     "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
 448     "tbreakpoint line 1300"
 449
 450 if ![gdb_skip_stdio_test "continuing to 1300"] {
 451     gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
 452             "continue to 1300"
 453 } else {
 454     gdb_test "continue" ".*" ""
 455 }
 456
 457 #step
 458 gdb_test "step" \
 459     "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \
 460     "step into init_bit_flags_combo"
 461
 462 #call print_bit_flags_combo(*bit_flags_combo)
 463 if ![gdb_skip_stdio_test "continuing to 1300"] {
 464     gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \
 465         "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \
 466         "print print_bit_flags_combo from init_bit_flags_combo"
 467 }
 468
 469
 470 #go -until 1305
 471 gdb_test "tbreak 1305" \
 472     "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
 473     "tbreakpoint line 1305"
 474
 475 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
 476 "continue to 1305"
 477
 478 #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 479
 480 # FIXME:
 481 # HP aCC demangler currently does not handle hp aCC functions with >10 args
 482 # DTS CLLbs16994  coulter 990114
 483
 484 if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
 485
 486 if {![gdb_skip_float_test "print print_long_arg_list"] && \
 487     ![gdb_skip_stdio_test "print print_long_arg_list"] } {
 488     gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" {
 489         "\[ \n\r\t\]+double : 22.250000"
 490         "\[ \n\r\t\]+double : 33.375000"
 491         "\[ \n\r\t\]+int : 0"
 492         "\[ \n\r\t\]+int : -25"
 493         "\[ \n\r\t\]+int : 100"
 494         "\[ \n\r\t\]+int : 2345"
 495         "\[ \n\r\t\]+alpha"
 496         "\[ \n\r\t\]+gamma"
 497         "\[ \n\r\t\]+epsilon"
 498         "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
 499         "\[ \n\r\t\]+Contents of three_char_t:"
 500         "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
 501         "\[ \n\r\t\]+Contents of five_char_t:"
 502         "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
 503         "\[ \n\r\t\]+Contents of int_char_combo_t:"
 504         "\[ \n\r\t\]+123\[ \t\]+z"
 505         "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
 506         "\[ \n\r\t\]+52"
 507         "\[ \n\r\t\]+Contents of struct1:"
 508         "\[ \n\r\t\]+6\[ \t\]+0"
 509         "\[ \n\r\t\]+Contents of struct2:"
 510         "\[ \n\r\t\]+10\[ \t\]+0"
 511         "\[ \n\r\t\]+Contents of struct3:"
 512         "\[ \n\r\t\]+12\[ \t\]+0"
 513         "\[ \n\r\t\]+Contents of one_double_t:"
 514         "\[ \n\r\t\]+1.111110"
 515         "\[ \n\r\t\]+Contents of one_double_t:"
 516         "\[ \n\r\t\]+-345.340000"
 517         "\[ \n\r\t\]+Contents of one_double_t:"
 518         "\[ \n\r\t\]+546464.200000"
 519         "\[ \n\r\t\]+Contents of two_floats_t:"
 520         "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
 521         "\[ \n\r\t\]+Contents of two_floats_t:"
 522         "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
 523         "\[ \n\r\t\]+Contents of two_floats_t:"
 524         "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
 525     }
 526 }
 527
 528
 529 #go -until 1311
 530 gdb_test "tbreak 1311" \
 531     "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
 532     "tbreakpoint line 1311"
 533
 534 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
 535 "continue to 1311"
 536
 537
 538 #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
 539 if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
 540     gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
 541         "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \
 542         "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
 543 }
 544
 545
 546 #call print_struct_rep(*struct1, *struct2, *struct3)
 547 if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
 548     gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \
 549         "print print_struct_rep(*struct1, *struct2, *struct3)" {
 550         "\[ \t\n\r\]+Contents of struct1:"
 551         "\[ \t\n\r\]+        22         0"
 552         "\[ \t\n\r\]+Contents of struct2:"
 553         "\[ \t\n\r\]+        42         0"
 554         "\[ \t\n\r\]+Contents of struct3:"
 555         "\[ \t\n\r\]+        62         0"
 556     }
 557 }
 558
 559 if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
 560     gdb_test "print print_one_large_struct(*list1)" \
 561         "         4         1.*" \
 562         "print print_one_large_struct(*list1)"
 563 }
 564
 565 set timeout $oldtimeout
 566 return
 567