gdb/testsuite/gdb.base/display.exp

   1 #   Copyright 1997-2016 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15
  16 # display.exp   Test display commands
  17 #               Also do some printing stuff for coverage's sake.
  18 #
  19 standard_testfile
  20
  21 if {[prepare_for_testing $testfile.exp $testfile $srcfile \
  22          {debug nowarnings}]} {
  23     untested display.exp
  24     return -1
  25 }
  26
  27 # Preserve the old timeout, and set a new one that should be
  28 # sufficient to avoid timing out during this test.
  29 set oldtimeout $timeout
  30 set timeout [expr "$timeout + 60"]
  31 verbose "Timeout is now $timeout seconds" 2
  32
  33 # use this to debug:
  34 #log_user 1
  35
  36 # Some coverage stuff
  37 #
  38 if !$use_gdb_stub {
  39     gdb_test "kill" ".*The program is not being run.*"
  40     gdb_test "detach" ".*"
  41     gdb_test "run" ".*"
  42
  43     gdb_load ${binfile}
  44     gdb_test "kill" ".*" "kill again"
  45     gdb_test "detach" ".*" "detach again"
  46
  47     gdb_exit
  48     gdb_start
  49     gdb_reinitialize_dir $srcdir/$subdir
  50     gdb_load ${binfile}
  51 }
  52
  53 # Ok, on to real life
  54 #
  55 if ![runto_main] then {
  56     fail "Could not run to main - other tests will fail."
  57     continue
  58 }
  59
  60 # Disable hardware watchpoints if necessary.
  61 if [target_info exists gdb,no_hardware_watchpoints] {
  62     gdb_test_no_output "set can-use-hw-watchpoints 0" ""
  63 }
  64
  65 set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
  66 gdb_test "break $bp_location1" ".*Breakpoint 2.*"           "break  do_loops"
  67 gdb_test "cont"     ".*Breakpoint 2, do_loops.*" "get to do_loops"
  68
  69 # Create stopping points.
  70 #
  71 gdb_test "watch sum"    ".*\[Ww\]atchpoint 3: sum.*" "set watch"
  72 set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
  73 gdb_test "break $bp_location2"     ".*Breakpoint 4.*" "break loop end"
  74
  75 # Create displays for those points
  76 #
  77 gdb_test "info disp" ".*There are no auto-display expressions now..*" "inf disp"
  78 gdb_test "disp i" ".*1: i = 0.*" "display i"
  79 gdb_test "disp/x j" ".*2: /x j = 0x0.*" "display j"
  80 gdb_test "disp/i &k" ".*3: x/i &k(\r\n|  )   $hex:.*" "display &k"
  81 gdb_test "disp/f f" ".*4: /f f = 3.1415*" "display/f f"
  82 gdb_test "disp/s &sum" ".*5: x/s &sum  $hex.*sum.:.*" "display/s &sum"
  83
  84 # Hit the displays
  85 #
  86 gdb_test "cont" [multi_line \
  87                      ".*\[Ww\]atchpoint 3: sum.*" \
  88                      "\[1-9\]*: i = 0.*" \
  89                      "\[1-9\]*: /x j = 0x0" \
  90                      "\[1-9\]*: x/i &k.*" \
  91                      "\[1-9\]*: /f f = 3.1415" \
  92                      "\[1-9\]*: x/s &sum.*" \
  93                     ] "first disp"
  94
  95 gdb_test "cont" [multi_line \
  96                      ".*\[Ww\]atchpoint 3: sum.*" \
  97                      "\[1-9\]*: i = 0.*" \
  98                      "\[1-9\]*: /x j = 0x0.*" \
  99                      "\[1-9\]*: x/i &k.*" \
 100                      "\[1-9\]*: /f f = 4.1415" \
 101                      "\[1-9\]*: x/s &sum.*" \
 102                     ] "second disp"
 103
 104 gdb_test "enab  disp 6" ".*No display number 6..*" "catch err"
 105 gdb_test_no_output "disab disp 1" "disab disp 1"
 106 gdb_test_no_output "disab disp 2" "disab disp 2"
 107 gdb_test_no_output "enab disp 1"  "re-enab"
 108 gdb_test_no_output "enab disp 1"  "re-enab of enab"
 109 gdb_test_no_output "undisp 5"     "undisp"
 110 gdb_test "info disp" [multi_line \
 111                           "Auto-display expressions now in effect.*" \
 112                           ".*y  i" \
 113                           ".*n  /x j" \
 114                           ".*y  /1bi &k" \
 115                           ".*y  /f f" \
 116                          ] "info disp"
 117
 118 gdb_test "cont" [multi_line \
 119                      ".*\[Ww\]atch.*" \
 120                      ".*i = 0" \
 121                      ".*5.1415" \
 122                     ] "next hit"
 123
 124 gdb_test "undisp" \
 125     "" \
 126     "undisp all" \
 127     ".*Delete all auto-display expressions.*y or n. $" \
 128     "y"
 129
 130
 131 # Test displaying a variable that is temporarily at a bad address.
 132 # But if we can examine what's at memory address 0, then we'll also be
 133 # able to display it without error.  Don't run the test in that case.
 134 set can_read_0 [is_address_zero_readable]
 135
 136 if { !$can_read_0 } {
 137     gdb_test "disp *p_i" ".*: \\*p_i = 0"
 138     gdb_test "p p_i = 0x0" " = \\(int \\*\\) 0x0"
 139     gdb_test "display" ".*: \\*p_i = <error: .*>" "display bad address"
 140     gdb_test "p p_i = &i" " = \\(int \\*\\) $hex"
 141     gdb_test "display" ".*: \\*p_i = 0" "display good address"
 142
 143     gdb_test "undisp" \
 144         "" \
 145         "undisp all again" \
 146         ".*Delete all auto-display expressions.*y or n. $" \
 147         "y"
 148 }
 149
 150 gdb_test "disab 3" ".*.*" "disab 3"
 151 gdb_test "cont" ".*Breakpoint 4.*" "watch off"
 152
 153 # Now the printf tests
 154 #
 155 # The "finish" command may leave us mid-line in the caller on some
 156 # targets, including but not limited to the m68k, i386 & PA.  So we
 157 # have to arrange to step until we hit the line with the call to
 158 # "do_vars".
 159 gdb_test_multiple "finish" "finish" {
 160     -re ".*do_loops\\(\\);.*$gdb_prompt $" {
 161         send_gdb "step\n"
 162         exp_continue
 163     }
 164     -re ".*do_vars.*$gdb_prompt $" {
 165         pass "finish"
 166     }
 167 }
 168
 169 gdb_test "step"      ".*do_vars.*.*i = 9.*"
 170 set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
 171 gdb_test "tbreak $bp_location3" ".*breakpoint 5 a.*" "tbreak in do_vars"
 172 gdb_test "cont"      ".*do_vars.*$bp_location3.*$bp_location3.*"
 173
 174 # Beat on printf a bit
 175 #
 176 gdb_test "printf" ".*Argument required.*"
 177 gdb_test "printf %d" ".*Bad format string, missing.*"
 178 gdb_test "printf \"%d" ".*Bad format string, non-terminated.*"
 179 gdb_test "printf \"%d%d\",i" ".*Wrong number of arguments.*"
 180 gdb_test "printf \"\\\\!\\a\\f\\r\\t\\v\\b\\n\"" ".*!.*"
 181 gdb_test_no_output "printf \"\"" "re-set term"
 182 gdb_test "printf \"\\w\"" ".*Unrecognized escape character.*"
 183 gdb_test "printf \"%d\" j" ".*Invalid argument syntax.*"
 184 gdb_test "printf \"%p\\n\", 0" "\\(nil\\)"
 185 gdb_test "printf \"%p\\n\", 1" "0x1"
 186
 187 # play with "print", too
 188 #
 189 gdb_test "print/k j" ".*Undefined output format.*"
 190 gdb_test "print/d j" " = 0\[\\r\\n\]+"   "debug test output 1"
 191 gdb_test "print/r j" " = 0\[\\r\\n\]+"   "debug test output 1a"
 192 gdb_test "print/x j" " = 0x0\[\\r\\n\]+" "debug test output 2"
 193 gdb_test "print/r j" " = 0x0\[\\r\\n\]+" "debug test output 2a"
 194 gdb_test "print j"   " = 0\[\\r\\n\]+"   "debug test output 3"
 195
 196 # x/0 j doesn't produce any output and terminates PA64 process when testing
 197 gdb_test_no_output "x/0 j"
 198
 199 gdb_test "print/0 j" ".*Item count other than 1 is meaningless.*" "print/0 j"
 200 gdb_test "print/s sum" " = 1000" "ignored s"
 201 gdb_test "print/i sum" ".*Format letter.*is meaningless.*.*" "no i"
 202 gdb_test "print/a &sum" ".*= $hex.*<sum>.*"
 203 # If the constant below is larger than the length of main, then
 204 # this test will (incorrectly) fail.  So use a small number.
 205 gdb_test "print/a main+4" ".*= $hex.*<.*>.*"
 206 gdb_test "print/a \$pc" ".*= $hex.*<do_vars+.*>.*"
 207 gdb_test "print/a &&j" ".*A .* error in expression.*"
 208
 209 # Done!
 210 #
 211 gdb_exit
 212
 213 # Restore the preserved old timeout value.
 214 set timeout $oldtimeout
 215 verbose "Timeout is now $timeout seconds" 2
 216
 217 return 0