gdb/testsuite/gdb.base/list.exp

   1 # Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2002, 2003, 2007, 2008,
   2 # 2009, 2010 Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16
  17 # This file was written by Fred Fish. (fnf@cygnus.com)
  18
  19 if $tracelevel then {
  20         strace $tracelevel
  21 }
  22
  23
  24 set testfile "list"
  25 set binfile ${objdir}/${subdir}/${testfile}
  26
  27 # Need to download the header to the host.
  28 remote_download host ${srcdir}/${subdir}/list0.h list0.h
  29
  30
  31 if  { [gdb_compile "${srcdir}/${subdir}/list0.c" "${binfile}0.o" object {debug}] != "" } {
  32      untested list.exp
  33      return -1
  34 }
  35
  36 if  { [gdb_compile "${srcdir}/${subdir}/list1.c" "${binfile}1.o" object {debug}] != "" } {
  37      untested list.exp
  38      return -1
  39 }
  40
  41 if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
  42      untested list.exp
  43      return -1
  44 }
  45
  46
  47
  48 # Create and source the file that provides information about the compiler
  49 # used to compile the test case.
  50 if [get_compiler_info ${binfile}] {
  51     return -1;
  52 }
  53
  54 #
  55 # Local utility proc just to set and verify listsize
  56 # Return 1 if success, 0 if fail.
  57 #
  58
  59 set set_listsize_count 0;
  60
  61 proc set_listsize { arg } {
  62     global gdb_prompt
  63     global set_listsize_count;
  64
  65     incr set_listsize_count;
  66     if [gdb_test "set listsize $arg" "" "setting listsize to $arg #$set_listsize_count"] {
  67         return 0;
  68     }
  69     if { $arg <= 0 } {
  70         set arg "unlimited";
  71     }
  72
  73     if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] {
  74         return 0;
  75     }
  76     return 1
  77 }
  78
  79 #
  80 # Test display of listsize lines around a given line number.
  81 #
  82
  83 proc test_listsize {} {
  84     global gdb_prompt
  85     global hp_cc_compiler
  86     global hp_aCC_compiler
  87
  88     # Show default size
  89
  90     gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size"
  91
  92     # Show the default lines
  93     # Note that remote targets that have debugging info for _start available will
  94     # list the lines there instead of main, so we skip this test for remote targets.
  95     # The second case is for optimized code, it is still correct.
  96
  97     if [target_info exists use_gdb_stub] {
  98         runto_main;
  99         unsupported "list default lines around main";
 100     } else {
 101         gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*10\[ \t\]+x = 0;|2.*11\[ \t\]+foo .x\[+)\]+;)" "list default lines around main"
 102     }
 103
 104     # Ensure we can limit printouts to one line
 105
 106     if [set_listsize 1] {
 107         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1"
 108         gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1"
 109     }
 110
 111     # Try just two lines
 112
 113     if [ set_listsize 2 ] {
 114         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 2"
 115         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2"
 116         gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+" "list line 3 with listsize 2"
 117     }
 118
 119     # Try small listsize > 1 that is an odd number
 120
 121     if [ set_listsize 3 ] {
 122         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 1 with listsize 3"
 123         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 2 with listsize 3"
 124         gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3"
 125     }
 126
 127     # Try small listsize > 2 that is an even number.
 128
 129     if [ set_listsize 4 ] then {
 130         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 1 with listsize 4"
 131         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 2 with listsize 4"
 132
 133         gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4"
 134         gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4"
 135     }
 136
 137     # Try a size larger than the entire file.
 138
 139     if [ set_listsize 100 ] then {
 140         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 1 with listsize 100"
 141
 142         gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 10 with listsize 100"
 143     }
 144
 145     # Try listsize of 0 which suppresses printing.
 146
 147     set_listsize 0
 148     gdb_test "list 1" "" "listsize of 0 suppresses output"
 149
 150     # Try listsize of -1 which is special, and means unlimited.
 151
 152     set_listsize -1
 153     setup_xfail "*-*-*"
 154     gdb_test "list 1" "1\[ \t\]+#include .*\r\n39\[ \t\]+\}" "list line 1 with unlimited listsize"
 155 }
 156
 157 #
 158 # Test "list filename:number" for C include file
 159 #
 160
 161 proc test_list_include_file {} {
 162     global gdb_prompt
 163
 164     setup_xfail_format "COFF"
 165     gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
 166
 167     setup_xfail_format "COFF"
 168     gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
 169 }
 170
 171 #
 172 # Test "list filename:number" for C source file
 173 #
 174
 175 proc test_list_filename_and_number {} {
 176     global gdb_prompt
 177
 178     set testcnt 0
 179
 180     send_gdb "list list0.c:1\n"
 181     gdb_expect {
 182         -re "1\[ \t\]+#include \"list0.h\".*10\[ \t]+x = 0;\r\n$gdb_prompt $" {
 183             incr testcnt
 184         }
 185         -re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests }
 186         timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests }
 187     }
 188     send_gdb "list list0.c:10\n"
 189     gdb_expect {
 190         -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" {
 191             incr testcnt
 192         }
 193         -re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests }
 194         timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests }
 195     }
 196     send_gdb "list list1.c:1\n"
 197     gdb_expect {
 198         -re "1\[ \t\]+\#include.*4\[ \t\]+.*int oof\[ \t\]*\(.*\);\r\n.*$gdb_prompt $" {
 199             incr testcnt
 200         }
 201         -re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests }
 202         timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests }
 203     }
 204     send_gdb "list list1.c:12\n"
 205     gdb_expect {
 206         -re "12\[ \t\]+long_line \[(\]+.*\[)\]+;.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
 207             incr testcnt
 208         }
 209         -re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests }
 210         timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests }
 211     }
 212     pass "list filename:number ($testcnt tests)"
 213     gdb_stop_suppressing_tests;
 214 }
 215
 216 #
 217 # Test "list function" for C source file
 218 #
 219
 220 proc test_list_function {} {
 221     global gdb_prompt
 222
 223     # gcc appears to generate incorrect debugging information for code
 224     # in include files, which breaks this test.
 225     # SunPRO cc is the second case below, it's also correct.
 226     gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1"
 227
 228     # Ultrix gdb takes the second case below; it's also correct.
 229     # SunPRO cc is the third case.
 230     gdb_test "list bar" "(4\[ \t\]+void.*\[ \t\]*long_line.*;.*bar.*9\[ \t\]*.*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;|7\[ \t\]+void.*14\[ \t\]+\})" "list function in source file 2"
 231
 232     # Test "list function" for C include file
 233     # Ultrix gdb is the second case, still correct.
 234     # SunPRO cc is the third case.
 235     gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file"
 236 }
 237
 238 proc test_list_forward {} {
 239     global gdb_prompt
 240
 241     set testcnt 0
 242
 243     send_gdb "list list0.c:10\n"
 244     gdb_expect {
 245         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 246         -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
 247         timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
 248     }
 249
 250     send_gdb "list\n"
 251     gdb_expect {
 252         -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 253         -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
 254         timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
 255     }
 256
 257     send_gdb "list\n"
 258     gdb_expect {
 259         -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 260         -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
 261         timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
 262     }
 263
 264     send_gdb "list\n"
 265     gdb_expect {
 266         -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt }
 267         -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
 268         timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
 269     }
 270
 271     pass "successive list commands to page forward ($testcnt tests)"
 272     gdb_stop_suppressing_tests;
 273 }
 274
 275 # Test that repeating the list linenum command doesn't print the same
 276 # lines over again.  Note that this test makes sure that the argument
 277 # linenum is dropped, when we repeat the previous command. 'x/5i $pc'
 278 # works the same way.
 279
 280 proc test_repeat_list_command {} {
 281     global gdb_prompt
 282
 283     set testcnt 0
 284
 285     send_gdb "list list0.c:10\n"
 286     gdb_expect {
 287         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 288         -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
 289         timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
 290     }
 291
 292     send_gdb "\n"
 293     gdb_expect {
 294         -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 295         -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
 296         timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
 297     }
 298
 299     send_gdb "\n"
 300     gdb_expect {
 301         -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 302         -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
 303         timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
 304     }
 305
 306     send_gdb "\n"
 307     gdb_expect {
 308         -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt }
 309         -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
 310         timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
 311     }
 312
 313     pass "repeat list commands to page forward using 'return' ($testcnt tests)"
 314     gdb_stop_suppressing_tests;
 315 }
 316
 317 proc test_list_backwards {} {
 318     global gdb_prompt
 319
 320     set testcnt 0
 321
 322     send_gdb "list list0.c:33\n"
 323     gdb_expect {
 324         -re "28\[ \t\]+foo \\(.*\\);.*37\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt }
 325         -re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests }
 326         timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests }
 327     }
 328
 329     send_gdb "list -\n"
 330     gdb_expect {
 331         -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 332         -re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests }
 333         timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests }
 334     }
 335
 336     send_gdb "list -\n"
 337     gdb_expect {
 338         -re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 339         -re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests }
 340         timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests }
 341     }
 342
 343     send_gdb "list -\n"
 344     gdb_expect {
 345         -re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 346         -re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests }
 347         timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests }
 348     }
 349
 350     pass "$testcnt successive \"list -\" commands to page backwards"
 351     gdb_stop_suppressing_tests;
 352 }
 353
 354 #
 355 # Test "list first,last"
 356 #
 357
 358 proc test_list_range {} {
 359     global gdb_prompt
 360
 361     gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2"
 362
 363     gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2"
 364
 365 #    gdb_test     "list -1,6"   "Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative"
 366
 367 #    gdb_test     "list -100,-40"       "Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative"
 368
 369     gdb_test "list 30,45" "30\[ \t\]+foo \(.*\);.*43\[ \t\]+\}" "list range; upper bound past EOF"
 370
 371     gdb_test "list 45,100" "Line number 45 out of range; .*list0.c has 43 lines." "list range; both bounds past EOF"
 372
 373     gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files"
 374 }
 375
 376 #
 377 # Test "list filename:function"
 378 #
 379
 380 proc test_list_filename_and_function {} {
 381     global gdb_prompt
 382
 383     set testcnt 0
 384
 385     # gcc appears to generate incorrect debugging information for code
 386     # in include files, which breaks this test.
 387     # SunPRO cc is the second case below, it's also correct.
 388     send_gdb "list list0.c:main\n"
 389     gdb_expect {
 390         -re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" {
 391             incr testcnt
 392         }
 393         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 394             pass "list function in source file 1"
 395         }
 396         -re ".*$gdb_prompt $" { fail "list list0.c:main" }
 397         timeout { fail "list list0.c:main (timeout)" }
 398     }
 399
 400     # Not sure what the point of having this function be unused is.
 401     # AIX is legitimately removing it.
 402     setup_xfail "rs6000-*-aix*"
 403     send_gdb "list list0.c:unused\n"
 404     gdb_expect {
 405         -re "40\[ \t\]+unused.*43\[ \t\]+\}\r\n$gdb_prompt $" {
 406             incr testcnt
 407         }
 408         -re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" {
 409             incr testcnt
 410         }
 411         -re ".*$gdb_prompt $" { fail "list list0.c:unused" }
 412         timeout { fail "list list0.c:unused (timeout)" }
 413     }
 414     clear_xfail "rs6000-*-aix*"
 415
 416     # gcc appears to generate incorrect debugging information for code
 417     # in include files, which breaks this test.
 418     # Ultrix gdb is the second case, one line different but still correct.
 419     # SunPRO cc is the third case.
 420     setup_xfail "rs6000-*-*" 1804
 421     setup_xfail_format "COFF"
 422     send_gdb "list list0.h:foo\n"
 423     gdb_expect {
 424         -re "2\[ \t\]+including file.  This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 425             incr testcnt
 426         }
 427         -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 428             incr testcnt
 429         }
 430         -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 431             incr testcnt
 432         }
 433         -re "No source file named list0.h.\r\n$gdb_prompt $" {
 434             fail "list list0.h:foo"
 435         }
 436         -re ".*$gdb_prompt $" { fail "list list0.h:foo" }
 437         timeout { fail "list list0.h:foo (timeout)" }
 438     }
 439
 440     # Ultrix gdb is the second case.
 441     send_gdb "list list1.c:bar\n"
 442     gdb_expect {
 443         -re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
 444             incr testcnt
 445         }
 446         -re "4\[ \t\]+void.*12\[ \t\]*long_line ..;\r\n$gdb_prompt $" {
 447             incr testcnt
 448         }
 449         -re "4\[ \t\]+void.*11\[ \t\]*\r\n$gdb_prompt $" {
 450             incr testcnt
 451         }
 452         -re ".*$gdb_prompt $" { fail "list list1.c:bar" }
 453         timeout { fail "list list1.c:bar (timeout)" }
 454     }
 455
 456     # Not sure what the point of having this function be unused is.
 457     # AIX is legitimately removing it.
 458     setup_xfail "rs6000-*-aix*"
 459     send_gdb "list list1.c:unused\n"
 460     gdb_expect {
 461         -re "12\[ \t\]+long_line \[(\]\[)\];.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
 462             incr testcnt
 463         }
 464         -re "14.*19\[ \t\]+\}\r\n.*$gdb_prompt $" {
 465             incr testcnt
 466         }
 467         -re ".*$gdb_prompt $" { fail "list list1.c:unused" }
 468         timeout { fail "list list1.c:unused (timeout)" }
 469     }
 470     clear_xfail "rs6000-*-aix*"
 471
 472     pass "list filename:function ($testcnt tests)"
 473
 474     # Test with quoting.
 475     gdb_test "list 'list0.c:main'" "int main.*"
 476
 477     # Test some invalid specs
 478     # The following test takes the FIXME result on most systems using
 479     # DWARF.  It fails to notice that main() is not in the file requested.
 480
 481     setup_xfail "*-*-*"
 482
 483 # Does this actually work ANYWHERE?  I believe not, as this is an `aspect' of
 484 # lookup_symbol(), where, when it is given a specific symtab which does not
 485 # contain the requested symbol, it will subsequently search all of the symtabs
 486 # for the requested symbol.
 487
 488     gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected"
 489
 490     gdb_test "list foobar.c:main" "No source file named foobar.c.|Location not found" "list filename:function; nonexistant file"
 491
 492     gdb_test "list list0.h:foobar" "Function \"foobar\" not defined.|Location not found" "list filename:function; nonexistant function"
 493
 494 }
 495
 496 proc test_forward_search {} {
 497         global timeout
 498
 499         gdb_test_no_output "set listsize 4"
 500         # On SunOS4, this gives us lines 19-22.  On AIX, it gives us
 501         # lines 20-23.  This depends on whether the line number of a function
 502         # is considered to be the openbrace or the first statement--either one
 503         # is acceptable.
 504         gdb_test "list long_line" "24\[ \t\]+long_line .*"
 505
 506         gdb_test "search 4321" " not found"
 507
 508         gdb_test "search 6789" "28\[ \t\]+oof .6789.;"
 509
 510         # Test that GDB won't crash if the line being searched is extremely long.
 511
 512         set oldtimeout $timeout
 513         set timeout [expr "$timeout + 300"]
 514         verbose "Timeout is now $timeout seconds" 2
 515         gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)"
 516         set timeout $oldtimeout
 517         verbose "Timeout is now $timeout seconds" 2
 518 }
 519
 520 # Start with a fresh gdb.
 521
 522 gdb_exit
 523 gdb_start
 524 gdb_reinitialize_dir $srcdir/$subdir
 525 gdb_load ${binfile}
 526
 527 if [target_info exists gdb_stub] {
 528     gdb_step_for_stub;
 529 }
 530
 531 gdb_test_no_output "set width 0"
 532
 533 test_listsize
 534 get_debug_format
 535 if [ set_listsize 10 ] then {
 536     test_list_include_file
 537     test_list_filename_and_number
 538     test_list_function
 539     test_list_forward
 540     test_list_backwards
 541     test_repeat_list_command
 542     test_list_range
 543     test_list_filename_and_function
 544     test_forward_search
 545 }
 546
 547 remote_exec build "rm -f list0.h"