gdb/testsuite/gdb.cp/userdef.exp

   1 # Tests of overloaded operators resolution.
   2 # Copyright 1998, 1999, 2002, 2004, 2005, 2006, 2007
   3 # Free Software Foundation, Inc.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  18
  19 # written by Elena Zannoni (ezannoni@cygnus.com)
  20 #
  21 # source file "userdef.cc"
  22 #
  23
  24 if $tracelevel then {
  25         strace $tracelevel
  26 }
  27
  28 if { [skip_cplus_tests] } { continue }
  29
  30 # On SPU this test fails because the executable exceeds local storage size.
  31 if { [istarget "spu*-*-*"] } {
  32         return 0
  33 }
  34
  35 set testfile "userdef"
  36 set srcfile ${testfile}.cc
  37 set binfile ${objdir}/${subdir}/${testfile}
  38
  39 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
  40      untested userdef.exp
  41      return -1
  42 }
  43
  44
  45 gdb_exit
  46 gdb_start
  47 gdb_reinitialize_dir $srcdir/$subdir
  48 gdb_load ${binfile}
  49
  50
  51 if ![runto_main] then {
  52     perror "couldn't run to breakpoint"
  53     continue
  54 }
  55
  56 send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
  57     send_gdb "cont\n"
  58     gdb_expect {
  59         -re "Break.* marker1(\\(\\)|) \\(\\) at .*:$decimal.*$gdb_prompt $" {
  60             send_gdb "up\n"
  61             gdb_expect {
  62                 -re ".*$gdb_prompt $" { pass "up from marker1" }
  63                 timeout { fail "up from marker1" }
  64             }
  65         }
  66         -re "$gdb_prompt $" { fail "continue to marker1"  }
  67         timeout { fail "(timeout) continue to marker1"  }
  68     }
  69
  70
  71 gdb_test "print one + two" "\\\$\[0-9\]* = {x = 6, y = 8}"
  72
  73 # If GDB fails to restore the selected frame properly after the
  74 # inferior function call above (see GDB PR 1155 for an explanation of
  75 # why this might happen), all the subsequent tests will fail.  We
  76 # should detect report that failure, but let the marker call finish so
  77 # that the rest of the tests can run undisturbed.
  78 gdb_test_multiple "frame" "re-selected 'main' frame after inferior call" {
  79     -re "#0  marker1.*$gdb_prompt $" {
  80         setup_kfail "gdb/1155" s390-*-linux-gnu
  81         fail "re-selected 'main' frame after inferior call"
  82         gdb_test "finish" ".*main.*at .*userdef.cc:.*// marker1-returns-here.*" \
  83                 "finish call to marker1"
  84     }
  85     -re "#1  ($hex in )?main.*$gdb_prompt $" {
  86         pass "re-selected 'main' frame after inferior call"
  87     }
  88 }
  89
  90 gdb_test "print one - two" "\\\$\[0-9\]* = {x = -2, y = -2}"
  91
  92 gdb_test "print one * two" "\\\$\[0-9\]* = {x = 8, y = 15}"
  93
  94 gdb_test "print one / two" "\\\$\[0-9\]* = {x = 0, y = 0}"
  95
  96 gdb_test "print one % two" "\\\$\[0-9\]* = {x = 2, y = 3}"
  97
  98 gdb_test "print one && two" "\\\$\[0-9\]* = 1\[\r\n\]"
  99
 100 gdb_test "print one || two" "\\\$\[0-9\]* = 1\[\r\n\]"
 101
 102 gdb_test "print one & two" "\\\$\[0-9\]* = {x = 0, y = 1}"
 103
 104 gdb_test "print one | two" "\\\$\[0-9\]* = {x = 6, y = 7}"
 105
 106 gdb_test "print one ^ two" "\\\$\[0-9\]* = {x = 6, y = 6}"
 107
 108 gdb_test "print one < two" "\\\$\[0-9\]* = 1\[\r\n\]"
 109
 110 gdb_test "print one <= two" "\\\$\[0-9\]* = 1\[\r\n\]"
 111
 112 gdb_test "print one > two" "\\\$\[0-9\]* = 0\[\r\n\]"
 113
 114 gdb_test "print one >= two" "\\\$\[0-9\]* = 0\[\r\n\]"
 115
 116 gdb_test "print one == two" "\\\$\[0-9\]* = 0\[\r\n\]"
 117
 118 gdb_test "print one != two" "\\\$\[0-9\]* = 1\[\r\n\]"
 119
 120 # Can't really check the output of this one without knowing
 121 # target integer width.  Make sure we don't try to call
 122 # the iostreams operator instead, though.
 123 gdb_test "print one << 31" "\\\$\[0-9\]* = {x = -?\[0-9\]*, y = -?\[0-9\]*}"
 124
 125 # Should be fine even on < 32-bit targets.
 126 gdb_test "print one >> 31" "\\\$\[0-9\]* = {x = 0, y = 0}"
 127
 128 gdb_test "print !one" "\\\$\[0-9\]* = 0\[\r\n\]"
 129
 130 # Assumes 2's complement.  So does everything...
 131 gdb_test "print +one" "\\\$\[0-9\]* = {x = 2, y = 3}"
 132
 133 gdb_test "print ~one" "\\\$\[0-9\]* = {x = -3, y = -4}"
 134
 135 gdb_test "print -one" "\\\$\[0-9\]* = {x = -2, y = -3}"
 136
 137 gdb_test "print one++" "\\\$\[0-9\]* = {x = 2, y = 4}"
 138
 139 gdb_test "print ++one" "\\\$\[0-9\]* = {x = 3, y = 4}"
 140
 141 gdb_test "print one--" "\\\$\[0-9\]* = {x = 3, y = 3}"
 142
 143 gdb_test "print --one" "\\\$\[0-9\]* = {x = 2, y = 3}"
 144
 145 gdb_test "print one += 7" "\\\$\[0-9\]* = {x = 9, y = 10}"
 146
 147 gdb_test "print two = one" "\\\$\[0-9\]* = {x = 9, y = 10}"
 148
 149 # Check that GDB tolerates whitespace in operator names.
 150 gdb_test "break A2::'operator+'" ".*Breakpoint $decimal at.*"
 151 gdb_test "break A2::'operator +'" ".*Breakpoint $decimal at.*"
 152
 153 # Check that GDB handles operator* correctly.
 154 gdb_test "print c" "\\\$\[0-9\]* = {m = {z = .*}}"
 155 gdb_test "print *c" "\\\$\[0-9\]* = \\(Member &\\) @$hex: {z = .*}"
 156 gdb_test "print &*c" "\\\$\[0-9\]* = \\(Member \\*\\) $hex"
 157 gdb_test "ptype &*c" "type = struct Member {\[\r\n \]+int z;\[\r\n\]+} &\\*"
 158
 159 gdb_exit
 160 return 0