hw/arm/highbank.c

   1 /*
   2  * Calxeda Highbank SoC emulation
   3  *
   4  * Copyright (c) 2010-2012 Calxeda
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms and conditions of the GNU General Public License,
   8  * version 2 or later, as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope it will be useful, but WITHOUT
  11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  * more details.
  14  *
  15  * You should have received a copy of the GNU General Public License along with
  16  * this program.  If not, see <http://www.gnu.org/licenses/>.
  17  *
  18  */
  19
  20 #include "qemu/osdep.h"
  21 #include "qemu-common.h"
  22 #include "qapi/error.h"
  23 #include "hw/sysbus.h"
  24 #include "migration/vmstate.h"
  25 #include "hw/arm/boot.h"
  26 #include "hw/loader.h"
  27 #include "net/net.h"
  28 #include "sysemu/kvm.h"
  29 #include "sysemu/runstate.h"
  30 #include "sysemu/sysemu.h"
  31 #include "hw/boards.h"
  32 #include "exec/address-spaces.h"
  33 #include "qemu/error-report.h"
  34 #include "hw/char/pl011.h"
  35 #include "hw/ide/ahci.h"
  36 #include "hw/cpu/a9mpcore.h"
  37 #include "hw/cpu/a15mpcore.h"
  38 #include "qemu/log.h"
  39 #include "qom/object.h"
  40
  41 #define SMP_BOOT_ADDR           0x100
  42 #define SMP_BOOT_REG            0x40
  43 #define MPCORE_PERIPHBASE       0xfff10000
  44
  45 #define MVBAR_ADDR              0x200
  46 #define BOARD_SETUP_ADDR        (MVBAR_ADDR + 8 * sizeof(uint32_t))
  47
  48 #define NIRQ_GIC                160
  49
  50 /* Board init.  */
  51
  52 static void hb_write_board_setup(ARMCPU *cpu,
  53                                  const struct arm_boot_info *info)
  54 {
  55     arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR);
  56 }
  57
  58 static void hb_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
  59 {
  60     int n;
  61     uint32_t smpboot[] = {
  62         0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 - read current core id */
  63         0xe210000f, /* ands r0, r0, #0x0f */
  64         0xe3a03040, /* mov r3, #0x40 - jump address is 0x40 + 0x10 * core id */
  65         0xe0830200, /* add r0, r3, r0, lsl #4 */
  66         0xe59f2024, /* ldr r2, privbase */
  67         0xe3a01001, /* mov r1, #1 */
  68         0xe5821100, /* str r1, [r2, #256] - set GICC_CTLR.Enable */
  69         0xe3a010ff, /* mov r1, #0xff */
  70         0xe5821104, /* str r1, [r2, #260] - set GICC_PMR.Priority to 0xff */
  71         0xf57ff04f, /* dsb */
  72         0xe320f003, /* wfi */
  73         0xe5901000, /* ldr     r1, [r0] */
  74         0xe1110001, /* tst     r1, r1 */
  75         0x0afffffb, /* beq     <wfi> */
  76         0xe12fff11, /* bx      r1 */
  77         MPCORE_PERIPHBASE   /* privbase: MPCore peripheral base address.  */
  78     };
  79     for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
  80         smpboot[n] = tswap32(smpboot[n]);
  81     }
  82     rom_add_blob_fixed_as("smpboot", smpboot, sizeof(smpboot), SMP_BOOT_ADDR,
  83                           arm_boot_address_space(cpu, info));
  84 }
  85
  86 static void hb_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
  87 {
  88     CPUARMState *env = &cpu->env;
  89
  90     switch (info->nb_cpus) {
  91     case 4:
  92         address_space_stl_notdirty(&address_space_memory,
  93                                    SMP_BOOT_REG + 0x30, 0,
  94                                    MEMTXATTRS_UNSPECIFIED, NULL);
  95     case 3:
  96         address_space_stl_notdirty(&address_space_memory,
  97                                    SMP_BOOT_REG + 0x20, 0,
  98                                    MEMTXATTRS_UNSPECIFIED, NULL);
  99     case 2:
 100         address_space_stl_notdirty(&address_space_memory,
 101                                    SMP_BOOT_REG + 0x10, 0,
 102                                    MEMTXATTRS_UNSPECIFIED, NULL);
 103         env->regs[15] = SMP_BOOT_ADDR;
 104         break;
 105     default:
 106         break;
 107     }
 108 }
 109
 110 #define NUM_REGS      0x200
 111 static void hb_regs_write(void *opaque, hwaddr offset,
 112                           uint64_t value, unsigned size)
 113 {
 114     uint32_t *regs = opaque;
 115
 116     if (offset == 0xf00) {
 117         if (value == 1 || value == 2) {
 118             qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 119         } else if (value == 3) {
 120             qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
 121         }
 122     }
 123
 124     if (offset / 4 >= NUM_REGS) {
 125         qemu_log_mask(LOG_GUEST_ERROR,
 126                   "highbank: bad write offset 0x%" HWADDR_PRIx "\n", offset);
 127         return;
 128     }
 129     regs[offset / 4] = value;
 130 }
 131
 132 static uint64_t hb_regs_read(void *opaque, hwaddr offset,
 133                              unsigned size)
 134 {
 135     uint32_t value;
 136     uint32_t *regs = opaque;
 137
 138     if (offset / 4 >= NUM_REGS) {
 139         qemu_log_mask(LOG_GUEST_ERROR,
 140                   "highbank: bad read offset 0x%" HWADDR_PRIx "\n", offset);
 141         return 0;
 142     }
 143     value = regs[offset / 4];
 144
 145     if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) {
 146         value |= 0x30000000;
 147     }
 148
 149     return value;
 150 }
 151
 152 static const MemoryRegionOps hb_mem_ops = {
 153     .read = hb_regs_read,
 154     .write = hb_regs_write,
 155     .endianness = DEVICE_NATIVE_ENDIAN,
 156 };
 157
 158 #define TYPE_HIGHBANK_REGISTERS "highbank-regs"
 159 typedef struct HighbankRegsState HighbankRegsState;
 160 #define HIGHBANK_REGISTERS(obj) \
 161     OBJECT_CHECK(HighbankRegsState, (obj), TYPE_HIGHBANK_REGISTERS)
 162
 163 struct HighbankRegsState {
 164     /*< private >*/
 165     SysBusDevice parent_obj;
 166     /*< public >*/
 167
 168     MemoryRegion iomem;
 169     uint32_t regs[NUM_REGS];
 170 };
 171
 172 static VMStateDescription vmstate_highbank_regs = {
 173     .name = "highbank-regs",
 174     .version_id = 0,
 175     .minimum_version_id = 0,
 176     .fields = (VMStateField[]) {
 177         VMSTATE_UINT32_ARRAY(regs, HighbankRegsState, NUM_REGS),
 178         VMSTATE_END_OF_LIST(),
 179     },
 180 };
 181
 182 static void highbank_regs_reset(DeviceState *dev)
 183 {
 184     HighbankRegsState *s = HIGHBANK_REGISTERS(dev);
 185
 186     s->regs[0x40] = 0x05F20121;
 187     s->regs[0x41] = 0x2;
 188     s->regs[0x42] = 0x05F30121;
 189     s->regs[0x43] = 0x05F40121;
 190 }
 191
 192 static void highbank_regs_init(Object *obj)
 193 {
 194     HighbankRegsState *s = HIGHBANK_REGISTERS(obj);
 195     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 196
 197     memory_region_init_io(&s->iomem, obj, &hb_mem_ops, s->regs,
 198                           "highbank_regs", 0x1000);
 199     sysbus_init_mmio(dev, &s->iomem);
 200 }
 201
 202 static void highbank_regs_class_init(ObjectClass *klass, void *data)
 203 {
 204     DeviceClass *dc = DEVICE_CLASS(klass);
 205
 206     dc->desc = "Calxeda Highbank registers";
 207     dc->vmsd = &vmstate_highbank_regs;
 208     dc->reset = highbank_regs_reset;
 209 }
 210
 211 static const TypeInfo highbank_regs_info = {
 212     .name          = TYPE_HIGHBANK_REGISTERS,
 213     .parent        = TYPE_SYS_BUS_DEVICE,
 214     .instance_size = sizeof(HighbankRegsState),
 215     .instance_init = highbank_regs_init,
 216     .class_init    = highbank_regs_class_init,
 217 };
 218
 219 static void highbank_regs_register_types(void)
 220 {
 221     type_register_static(&highbank_regs_info);
 222 }
 223
 224 type_init(highbank_regs_register_types)
 225
 226 static struct arm_boot_info highbank_binfo;
 227
 228 enum cxmachines {
 229     CALXEDA_HIGHBANK,
 230     CALXEDA_MIDWAY,
 231 };
 232
 233 /* ram_size must be set to match the upper bound of memory in the
 234  * device tree (linux/arch/arm/boot/dts/highbank.dts), which is
 235  * normally 0xff900000 or -m 4089. When running this board on a
 236  * 32-bit host, set the reg value of memory to 0xf7ff00000 in the
 237  * device tree and pass -m 2047 to QEMU.
 238  */
 239 static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
 240 {
 241     DeviceState *dev = NULL;
 242     SysBusDevice *busdev;
 243     qemu_irq pic[128];
 244     int n;
 245     unsigned int smp_cpus = machine->smp.cpus;
 246     qemu_irq cpu_irq[4];
 247     qemu_irq cpu_fiq[4];
 248     qemu_irq cpu_virq[4];
 249     qemu_irq cpu_vfiq[4];
 250     MemoryRegion *sysram;
 251     MemoryRegion *sysmem;
 252     char *sysboot_filename;
 253
 254     switch (machine_id) {
 255     case CALXEDA_HIGHBANK:
 256         machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
 257         break;
 258     case CALXEDA_MIDWAY:
 259         machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
 260         break;
 261     default:
 262         assert(0);
 263     }
 264
 265     for (n = 0; n < smp_cpus; n++) {
 266         Object *cpuobj;
 267         ARMCPU *cpu;
 268
 269         cpuobj = object_new(machine->cpu_type);
 270         cpu = ARM_CPU(cpuobj);
 271
 272         object_property_set_int(cpuobj, "psci-conduit", QEMU_PSCI_CONDUIT_SMC,
 273                                 &error_abort);
 274
 275         if (n) {
 276             /* Secondary CPUs start in PSCI powered-down state */
 277             object_property_set_bool(cpuobj, "start-powered-off", true,
 278                                      &error_abort);
 279         }
 280
 281         if (object_property_find(cpuobj, "reset-cbar", NULL)) {
 282             object_property_set_int(cpuobj, "reset-cbar", MPCORE_PERIPHBASE,
 283                                     &error_abort);
 284         }
 285         qdev_realize(DEVICE(cpuobj), NULL, &error_fatal);
 286         cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
 287         cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ);
 288         cpu_virq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VIRQ);
 289         cpu_vfiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VFIQ);
 290     }
 291
 292     sysmem = get_system_memory();
 293     /* SDRAM at address zero.  */
 294     memory_region_add_subregion(sysmem, 0, machine->ram);
 295
 296     sysram = g_new(MemoryRegion, 1);
 297     memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000,
 298                            &error_fatal);
 299     memory_region_add_subregion(sysmem, 0xfff88000, sysram);
 300     if (bios_name != NULL) {
 301         sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
 302         if (sysboot_filename != NULL) {
 303             if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
 304                 error_report("Unable to load %s", bios_name);
 305                 exit(1);
 306             }
 307             g_free(sysboot_filename);
 308         } else {
 309             error_report("Unable to find %s", bios_name);
 310             exit(1);
 311         }
 312     }
 313
 314     switch (machine_id) {
 315     case CALXEDA_HIGHBANK:
 316         dev = qdev_new("l2x0");
 317         busdev = SYS_BUS_DEVICE(dev);
 318         sysbus_realize_and_unref(busdev, &error_fatal);
 319         sysbus_mmio_map(busdev, 0, 0xfff12000);
 320
 321         dev = qdev_new(TYPE_A9MPCORE_PRIV);
 322         break;
 323     case CALXEDA_MIDWAY:
 324         dev = qdev_new(TYPE_A15MPCORE_PRIV);
 325         break;
 326     }
 327     qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
 328     qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
 329     busdev = SYS_BUS_DEVICE(dev);
 330     sysbus_realize_and_unref(busdev, &error_fatal);
 331     sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
 332     for (n = 0; n < smp_cpus; n++) {
 333         sysbus_connect_irq(busdev, n, cpu_irq[n]);
 334         sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]);
 335         sysbus_connect_irq(busdev, n + 2 * smp_cpus, cpu_virq[n]);
 336         sysbus_connect_irq(busdev, n + 3 * smp_cpus, cpu_vfiq[n]);
 337     }
 338
 339     for (n = 0; n < 128; n++) {
 340         pic[n] = qdev_get_gpio_in(dev, n);
 341     }
 342
 343     dev = qdev_new("sp804");
 344     qdev_prop_set_uint32(dev, "freq0", 150000000);
 345     qdev_prop_set_uint32(dev, "freq1", 150000000);
 346     busdev = SYS_BUS_DEVICE(dev);
 347     sysbus_realize_and_unref(busdev, &error_fatal);
 348     sysbus_mmio_map(busdev, 0, 0xfff34000);
 349     sysbus_connect_irq(busdev, 0, pic[18]);
 350     pl011_create(0xfff36000, pic[20], serial_hd(0));
 351
 352     dev = qdev_new(TYPE_HIGHBANK_REGISTERS);
 353     busdev = SYS_BUS_DEVICE(dev);
 354     sysbus_realize_and_unref(busdev, &error_fatal);
 355     sysbus_mmio_map(busdev, 0, 0xfff3c000);
 356
 357     sysbus_create_simple("pl061", 0xfff30000, pic[14]);
 358     sysbus_create_simple("pl061", 0xfff31000, pic[15]);
 359     sysbus_create_simple("pl061", 0xfff32000, pic[16]);
 360     sysbus_create_simple("pl061", 0xfff33000, pic[17]);
 361     sysbus_create_simple("pl031", 0xfff35000, pic[19]);
 362     sysbus_create_simple("pl022", 0xfff39000, pic[23]);
 363
 364     sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]);
 365
 366     if (nd_table[0].used) {
 367         qemu_check_nic_model(&nd_table[0], "xgmac");
 368         dev = qdev_new("xgmac");
 369         qdev_set_nic_properties(dev, &nd_table[0]);
 370         sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 371         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
 372         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
 373         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
 374         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);
 375
 376         qemu_check_nic_model(&nd_table[1], "xgmac");
 377         dev = qdev_new("xgmac");
 378         qdev_set_nic_properties(dev, &nd_table[1]);
 379         sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 380         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
 381         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
 382         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
 383         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
 384     }
 385
 386     /* TODO create and connect IDE devices for ide_drive_get() */
 387
 388     highbank_binfo.ram_size = machine->ram_size;
 389     /* highbank requires a dtb in order to boot, and the dtb will override
 390      * the board ID. The following value is ignored, so set it to -1 to be
 391      * clear that the value is meaningless.
 392      */
 393     highbank_binfo.board_id = -1;
 394     highbank_binfo.nb_cpus = smp_cpus;
 395     highbank_binfo.loader_start = 0;
 396     highbank_binfo.write_secondary_boot = hb_write_secondary;
 397     highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
 398     if (!kvm_enabled()) {
 399         highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
 400         highbank_binfo.write_board_setup = hb_write_board_setup;
 401         highbank_binfo.secure_board_setup = true;
 402     } else {
 403         warn_report("cannot load built-in Monitor support "
 404                     "if KVM is enabled. Some guests (such as Linux) "
 405                     "may not boot.");
 406     }
 407
 408     arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo);
 409 }
 410
 411 static void highbank_init(MachineState *machine)
 412 {
 413     calxeda_init(machine, CALXEDA_HIGHBANK);
 414 }
 415
 416 static void midway_init(MachineState *machine)
 417 {
 418     calxeda_init(machine, CALXEDA_MIDWAY);
 419 }
 420
 421 static void highbank_class_init(ObjectClass *oc, void *data)
 422 {
 423     MachineClass *mc = MACHINE_CLASS(oc);
 424
 425     mc->desc = "Calxeda Highbank (ECX-1000)";
 426     mc->init = highbank_init;
 427     mc->block_default_type = IF_IDE;
 428     mc->units_per_default_bus = 1;
 429     mc->max_cpus = 4;
 430     mc->ignore_memory_transaction_failures = true;
 431     mc->default_ram_id = "highbank.dram";
 432 }
 433
 434 static const TypeInfo highbank_type = {
 435     .name = MACHINE_TYPE_NAME("highbank"),
 436     .parent = TYPE_MACHINE,
 437     .class_init = highbank_class_init,
 438 };
 439
 440 static void midway_class_init(ObjectClass *oc, void *data)
 441 {
 442     MachineClass *mc = MACHINE_CLASS(oc);
 443
 444     mc->desc = "Calxeda Midway (ECX-2000)";
 445     mc->init = midway_init;
 446     mc->block_default_type = IF_IDE;
 447     mc->units_per_default_bus = 1;
 448     mc->max_cpus = 4;
 449     mc->ignore_memory_transaction_failures = true;
 450     mc->default_ram_id = "highbank.dram";
 451 }
 452
 453 static const TypeInfo midway_type = {
 454     .name = MACHINE_TYPE_NAME("midway"),
 455     .parent = TYPE_MACHINE,
 456     .class_init = midway_class_init,
 457 };
 458
 459 static void calxeda_machines_init(void)
 460 {
 461     type_register_static(&highbank_type);
 462     type_register_static(&midway_type);
 463 }
 464
 465 type_init(calxeda_machines_init)