include/bootstage.h

   1 /*
   2  * This file implements recording of each stage of the boot process. It is
   3  * intended to implement timing of each stage, reporting this information
   4  * to the user and passing it to the OS for logging / further analysis.
   5  *
   6  * Copyright (c) 2011 The Chromium OS Authors.
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef _BOOTSTAGE_H
  27 #define _BOOTSTAGE_H
  28
  29 /* The number of boot stage records available for the user */
  30 #ifndef CONFIG_BOOTSTAGE_USER_COUNT
  31 #define CONFIG_BOOTSTAGE_USER_COUNT     20
  32 #endif
  33
  34 /* Flags for each bootstage record */
  35 enum bootstage_flags {
  36         BOOTSTAGEF_ERROR        = 1 << 0,       /* Error record */
  37         BOOTSTAGEF_ALLOC        = 1 << 1,       /* Allocate an id */
  38 };
  39
  40 /*
  41  * A list of boot stages that we know about. Each of these indicates the
  42  * state that we are at, and the action that we are about to perform. For
  43  * errors, we issue an error for an item when it fails. Therefore the
  44  * normal sequence is:
  45  *
  46  * progress action1
  47  * progress action2
  48  * progress action3
  49  *
  50  * and an error condition where action 3 failed would be:
  51  *
  52  * progress action1
  53  * progress action2
  54  * progress action3
  55  * error on action3
  56  */
  57 enum bootstage_id {
  58         BOOTSTAGE_ID_START = 0,
  59         BOOTSTAGE_ID_CHECK_MAGIC,       /* Checking image magic */
  60         BOOTSTAGE_ID_CHECK_HEADER,      /* Checking image header */
  61         BOOTSTAGE_ID_CHECK_CHECKSUM,    /* Checking image checksum */
  62         BOOTSTAGE_ID_CHECK_ARCH,        /* Checking architecture */
  63
  64         BOOTSTAGE_ID_CHECK_IMAGETYPE = 5,/* Checking image type */
  65         BOOTSTAGE_ID_DECOMP_IMAGE,      /* Decompressing image */
  66         BOOTSTAGE_ID_KERNEL_LOADED,     /* Kernel has been loaded */
  67         BOOTSTAGE_ID_DECOMP_UNIMPL = 7, /* Odd decompression algorithm */
  68         BOOTSTAGE_ID_CHECK_BOOT_OS,     /* Calling OS-specific boot function */
  69         BOOTSTAGE_ID_BOOT_OS_RETURNED,  /* Tried to boot OS, but it returned */
  70         BOOTSTAGE_ID_CHECK_RAMDISK = 9, /* Checking ram disk */
  71
  72         BOOTSTAGE_ID_RD_MAGIC,          /* Checking ram disk magic */
  73         BOOTSTAGE_ID_RD_HDR_CHECKSUM,   /* Checking ram disk heder checksum */
  74         BOOTSTAGE_ID_RD_CHECKSUM,       /* Checking ram disk checksum */
  75         BOOTSTAGE_ID_COPY_RAMDISK = 12, /* Copying ram disk into place */
  76         BOOTSTAGE_ID_RAMDISK,           /* Checking for valid ramdisk */
  77         BOOTSTAGE_ID_NO_RAMDISK,        /* No ram disk found (not an error) */
  78
  79         BOOTSTAGE_ID_RUN_OS     = 15,   /* Exiting U-Boot, entering OS */
  80
  81         BOOTSTAGE_ID_NEED_RESET = 30,
  82         BOOTSTAGE_ID_POST_FAIL,         /* Post failure */
  83         BOOTSTAGE_ID_POST_FAIL_R,       /* Post failure reported after reloc */
  84
  85         /*
  86          * This set is reported ony by x86, and the meaning is different. In
  87          * this case we are reporting completion of a particular stage.
  88          * This should probably change in he x86 code (which doesn't report
  89          * errors in any case), but discussion this can perhaps wait until we
  90          * have a generic board implementation.
  91          */
  92         BOOTSTAGE_ID_BOARD_INIT_R,      /* We have relocated */
  93         BOOTSTAGE_ID_BOARD_GLOBAL_DATA, /* Global data is set up */
  94
  95         BOOTSTAGE_ID_BOARD_INIT_SEQ,    /* We completed the init sequence */
  96         BOOTSTAGE_ID_BOARD_FLASH,       /* We have configured flash banks */
  97         BOOTSTAGE_ID_BOARD_FLASH_37,    /* In case you didn't hear... */
  98         BOOTSTAGE_ID_BOARD_ENV,         /* Environment is relocated & ready */
  99         BOOTSTAGE_ID_BOARD_PCI,         /* PCI is up */
 100
 101         BOOTSTAGE_ID_BOARD_INTERRUPTS,  /* Exceptions / interrupts ready */
 102         BOOTSTAGE_ID_BOARD_DONE,        /* Board init done, off to main loop */
 103         /* ^^^ here ends the x86 sequence */
 104
 105         /* Boot stages related to loading a kernel from an IDE device */
 106         BOOTSTAGE_ID_IDE_START = 41,
 107         BOOTSTAGE_ID_IDE_ADDR,
 108         BOOTSTAGE_ID_IDE_BOOT_DEVICE,
 109         BOOTSTAGE_ID_IDE_TYPE,
 110
 111         BOOTSTAGE_ID_IDE_PART,
 112         BOOTSTAGE_ID_IDE_PART_INFO,
 113         BOOTSTAGE_ID_IDE_PART_TYPE,
 114         BOOTSTAGE_ID_IDE_PART_READ,
 115         BOOTSTAGE_ID_IDE_FORMAT,
 116
 117         BOOTSTAGE_ID_IDE_CHECKSUM,      /* 50 */
 118         BOOTSTAGE_ID_IDE_READ,
 119
 120         /* Boot stages related to loading a kernel from an NAND device */
 121         BOOTSTAGE_ID_NAND_PART,
 122         BOOTSTAGE_ID_NAND_SUFFIX,
 123         BOOTSTAGE_ID_NAND_BOOT_DEVICE,
 124         BOOTSTAGE_ID_NAND_HDR_READ = 55,
 125         BOOTSTAGE_ID_NAND_AVAILABLE = 55,
 126         BOOTSTAGE_ID_NAND_TYPE = 57,
 127         BOOTSTAGE_ID_NAND_READ,
 128
 129         /* Boot stages related to loading a kernel from an network device */
 130         BOOTSTAGE_ID_NET_CHECKSUM = 60,
 131         BOOTSTAGE_ID_NET_ETH_START = 64,
 132         BOOTSTAGE_ID_NET_ETH_INIT,
 133
 134         BOOTSTAGE_ID_NET_START = 80,
 135         BOOTSTAGE_ID_NET_NETLOOP_OK,
 136         BOOTSTAGE_ID_NET_LOADED,
 137         BOOTSTAGE_ID_NET_DONE_ERR,
 138         BOOTSTAGE_ID_NET_DONE,
 139
 140         /*
 141          * Boot stages related to loading a FIT image. Some of these are a
 142          * bit wonky.
 143          */
 144         BOOTSTAGE_ID_FIT_FORMAT = 100,
 145         BOOTSTAGE_ID_FIT_NO_UNIT_NAME,
 146         BOOTSTAGE_ID_FIT_UNIT_NAME,
 147         BOOTSTAGE_ID_FIT_CONFIG,
 148         BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE,
 149         BOOTSTAGE_ID_FIT_CHECK_HASH = 104,
 150
 151         BOOTSTAGE_ID_FIT_CHECK_ARCH,
 152         BOOTSTAGE_ID_FIT_CHECK_KERNEL,
 153         BOOTSTAGE_ID_FIT_CHECKED,
 154
 155         BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR = 107,
 156         BOOTSTAGE_ID_FIT_KERNEL_INFO,
 157         BOOTSTAGE_ID_FIT_TYPE,
 158
 159         BOOTSTAGE_ID_FIT_COMPRESSION,
 160         BOOTSTAGE_ID_FIT_OS,
 161         BOOTSTAGE_ID_FIT_LOADADDR,
 162         BOOTSTAGE_ID_OVERWRITTEN,
 163
 164         BOOTSTAGE_ID_FIT_RD_FORMAT = 120,
 165         BOOTSTAGE_ID_FIT_RD_FORMAT_OK,
 166         BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME,
 167         BOOTSTAGE_ID_FIT_RD_UNIT_NAME,
 168         BOOTSTAGE_ID_FIT_RD_SUBNODE,
 169
 170         BOOTSTAGE_ID_FIT_RD_CHECK,
 171         BOOTSTAGE_ID_FIT_RD_HASH = 125,
 172         BOOTSTAGE_ID_FIT_RD_CHECK_ALL,
 173         BOOTSTAGE_ID_FIT_RD_GET_DATA,
 174         BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK = 127,
 175         BOOTSTAGE_ID_FIT_RD_GET_DATA_OK,
 176         BOOTSTAGE_ID_FIT_RD_LOAD,
 177
 178         BOOTSTAGE_ID_IDE_FIT_READ = 140,
 179         BOOTSTAGE_ID_IDE_FIT_READ_OK,
 180
 181         BOOTSTAGE_ID_NAND_FIT_READ = 150,
 182         BOOTSTAGE_ID_NAND_FIT_READ_OK,
 183
 184         /*
 185          * These boot stages are new, higher level, and not directly related
 186          * to the old boot progress numbers. They are useful for recording
 187          * rough boot timing information.
 188          */
 189         BOOTSTAGE_ID_AWAKE,
 190         BOOTSTAGE_ID_START_SPL,
 191         BOOTSTAGE_ID_START_UBOOT_F,
 192         BOOTSTAGE_ID_START_UBOOT_R,
 193         BOOTSTAGE_ID_USB_START,
 194         BOOTSTAGE_ID_ETH_START,
 195         BOOTSTAGE_ID_BOOTP_START,
 196         BOOTSTAGE_ID_BOOTP_STOP,
 197         BOOTSTAGE_ID_BOOTM_START,
 198         BOOTSTAGE_ID_BOOTM_HANDOFF,
 199         BOOTSTAGE_ID_MAIN_LOOP,
 200         BOOTSTAGE_KERNELREAD_START,
 201         BOOTSTAGE_KERNELREAD_STOP,
 202         BOOTSTAGE_ID_BOARD_INIT,
 203         BOOTSTAGE_ID_BOARD_INIT_DONE,
 204
 205         BOOTSTAGE_ID_CPU_AWAKE,
 206         BOOTSTAGE_ID_MAIN_CPU_AWAKE,
 207         BOOTSTAGE_ID_MAIN_CPU_READY,
 208
 209         BOOTSTAGE_ID_ACCUM_LCD,
 210
 211         /* a few spare for the user, from here */
 212         BOOTSTAGE_ID_USER,
 213         BOOTSTAGE_ID_COUNT = BOOTSTAGE_ID_USER + CONFIG_BOOTSTAGE_USER_COUNT,
 214         BOOTSTAGE_ID_ALLOC,
 215 };
 216
 217 /*
 218  * Return the time since boot in microseconds, This is needed for bootstage
 219  * and should be defined in CPU- or board-specific code. If undefined then
 220  * millisecond resolution will be used (the standard get_timer()).
 221  */
 222 ulong timer_get_boot_us(void);
 223
 224 #if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC)
 225 /*
 226  * Board code can implement show_boot_progress() if needed.
 227  *
 228  * @param val   Progress state (enum bootstage_id), or -id if an error
 229  *              has occurred.
 230  */
 231 void show_boot_progress(int val);
 232 #else
 233 #define show_boot_progress(val) do {} while (0)
 234 #endif
 235
 236 #if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \
 237         !defined(USE_HOSTCC)
 238 /* This is the full bootstage implementation */
 239
 240 /**
 241  * Relocate existing bootstage records
 242  *
 243  * Call this after relocation has happened and after malloc has been initted.
 244  * We need to copy any pointers in bootstage records that were added pre-
 245  * relocation, since memory can be overritten later.
 246  * @return Always returns 0, to indicate success
 247  */
 248 int bootstage_relocate(void);
 249
 250 /**
 251  * Add a new bootstage record
 252  *
 253  * @param id    Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC)
 254  * @param name  Name of record, or NULL for none
 255  * @param flags Flags (BOOTSTAGEF_...)
 256  * @param mark  Time to record in this record, in microseconds
 257  */
 258 ulong bootstage_add_record(enum bootstage_id id, const char *name,
 259                            int flags, ulong mark);
 260
 261 /*
 262  * Mark a time stamp for the current boot stage.
 263  */
 264 ulong bootstage_mark(enum bootstage_id id);
 265
 266 ulong bootstage_error(enum bootstage_id id);
 267
 268 ulong bootstage_mark_name(enum bootstage_id id, const char *name);
 269
 270 /**
 271  * Mark a time stamp in the given function and line number
 272  *
 273  * See BOOTSTAGE_MARKER() for a convenient macro.
 274  *
 275  * @param file          Filename to record (NULL if none)
 276  * @param func          Function name to record
 277  * @param linenum       Line number to record
 278  * @return recorded time stamp
 279  */
 280 ulong bootstage_mark_code(const char *file, const char *func,
 281                           int linenum);
 282
 283 /**
 284  * Mark the start of a bootstage activity. The end will be marked later with
 285  * bootstage_accum() and at that point we accumulate the time taken. Calling
 286  * this function turns the given id into a accumulator rather than and
 287  * absolute mark in time. Accumulators record the total amount of time spent
 288  * in an activty during boot.
 289  *
 290  * @param id    Bootstage id to record this timestamp against
 291  * @param name  Textual name to display for this id in the report (maybe NULL)
 292  * @return start timestamp in microseconds
 293  */
 294 uint32_t bootstage_start(enum bootstage_id id, const char *name);
 295
 296 /**
 297  * Mark the end of a bootstage activity
 298  *
 299  * After previously marking the start of an activity with bootstage_start(),
 300  * call this function to mark the end. You can call these functions in pairs
 301  * as many times as you like.
 302  *
 303  * @param id    Bootstage id to record this timestamp against
 304  * @return time spent in this iteration of the activity (i.e. the time now
 305  *              less the start time recorded in the last bootstage_start() call
 306  *              with this id.
 307  */
 308 uint32_t bootstage_accum(enum bootstage_id id);
 309
 310 /* Print a report about boot time */
 311 void bootstage_report(void);
 312
 313 /**
 314  * Add bootstage information to the device tree
 315  *
 316  * @return 0 if ok, -ve on error
 317  */
 318 int bootstage_fdt_add_report(void);
 319
 320 /*
 321  * Stash bootstage data into memory
 322  *
 323  * @param base  Base address of memory buffer
 324  * @param size  Size of memory buffer
 325  * @return 0 if stashed ok, -1 if out of space
 326  */
 327 int bootstage_stash(void *base, int size);
 328
 329 /**
 330  * Read bootstage data from memory
 331  *
 332  * Bootstage data is read from memory and placed in the bootstage table
 333  * in the user records.
 334  *
 335  * @param base  Base address of memory buffer
 336  * @param size  Size of memory buffer (-1 if unknown)
 337  * @return 0 if unstashed ok, -1 if bootstage info not found, or out of space
 338  */
 339 int bootstage_unstash(void *base, int size);
 340
 341 #else
 342 static inline ulong bootstage_add_record(enum bootstage_id id,
 343                 const char *name, int flags, ulong mark)
 344 {
 345         return 0;
 346 }
 347
 348 /*
 349  * This is a dummy implementation which just calls show_boot_progress(),
 350  * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined
 351  */
 352
 353 static inline int bootstage_relocate(void)
 354 {
 355         return 0;
 356 }
 357
 358 static inline ulong bootstage_mark(enum bootstage_id id)
 359 {
 360         show_boot_progress(id);
 361         return 0;
 362 }
 363
 364 static inline ulong bootstage_error(enum bootstage_id id)
 365 {
 366         show_boot_progress(-id);
 367         return 0;
 368 }
 369
 370 static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name)
 371 {
 372         return 0;
 373 }
 374
 375 static inline ulong bootstage_mark_code(const char *file, const char *func,
 376                                         int linenum)
 377 {
 378         return 0;
 379 }
 380
 381 static inline uint32_t bootstage_start(enum bootstage_id id, const char *name)
 382 {
 383         return 0;
 384 }
 385
 386 static inline uint32_t bootstage_accum(enum bootstage_id id)
 387 {
 388         return 0;
 389 }
 390
 391 static inline int bootstage_stash(void *base, int size)
 392 {
 393         return 0;       /* Pretend to succeed */
 394 }
 395
 396 static inline int bootstage_unstash(void *base, int size)
 397 {
 398         return 0;       /* Pretend to succeed */
 399 }
 400 #endif /* CONFIG_BOOTSTAGE */
 401
 402 /* Helper macro for adding a bootstage to a line of code */
 403 #define BOOTSTAGE_MARKER()      \
 404                 bootstage_mark_code(__FILE__, __func__, __LINE__)
 405
 406 #endif