include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * B4860 QDS board configuration file
  12  */
  13 #define CONFIG_B4860QDS
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  17 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  18 #ifndef CONFIG_NAND
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #else
  22 #define CONFIG_SPL_FLUSH_IMAGE
  23 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  24 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  25 #define CONFIG_SYS_TEXT_BASE            0x00201000
  26 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  27 #define CONFIG_SPL_PAD_TO               0x40000
  28 #define CONFIG_SPL_MAX_SIZE             0x28000
  29 #define RESET_VECTOR_OFFSET             0x27FFC
  30 #define BOOT_PAGE_OFFSET                0x27000
  31 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  32 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  33 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  34 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  35 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  36 #define CONFIG_SPL_NAND_BOOT
  37 #ifdef CONFIG_SPL_BUILD
  38 #define CONFIG_SPL_SKIP_RELOCATE
  39 #define CONFIG_SPL_COMMON_INIT_DDR
  40 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  41 #define CONFIG_SYS_NO_FLASH
  42 #endif
  43 #endif
  44 #endif
  45
  46 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  47 /* Set 1M boot space */
  48 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  49 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  50                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  51 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  52 #define CONFIG_SYS_NO_FLASH
  53 #endif
  54
  55 /* High Level Configuration Options */
  56 #define CONFIG_BOOKE
  57 #define CONFIG_E500                     /* BOOKE e500 family */
  58 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  59 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  60 #define CONFIG_MP                       /* support multiple processors */
  61
  62 #ifndef CONFIG_SYS_TEXT_BASE
  63 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  64 #endif
  65
  66 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  67 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  68 #endif
  69
  70 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  71 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  72 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  73 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  74 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  75 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  76 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  77
  78 #ifndef CONFIG_PPC_B4420
  79 #define CONFIG_SYS_SRIO
  80 #define CONFIG_SRIO1                    /* SRIO port 1 */
  81 #define CONFIG_SRIO2                    /* SRIO port 2 */
  82 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  83 #endif
  84
  85 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  86
  87 /* I2C bus multiplexer */
  88 #define I2C_MUX_PCA_ADDR                0x77
  89
  90 /* VSC Crossbar switches */
  91 #define CONFIG_VSC_CROSSBAR
  92 #define I2C_CH_DEFAULT                  0x8
  93 #define I2C_CH_VSC3316                  0xc
  94 #define I2C_CH_VSC3308                  0xd
  95
  96 #define VSC3316_TX_ADDRESS              0x70
  97 #define VSC3316_RX_ADDRESS              0x71
  98 #define VSC3308_TX_ADDRESS              0x02
  99 #define VSC3308_RX_ADDRESS              0x03
 100
 101 /* IDT clock synthesizers */
 102 #define CONFIG_IDT8T49N222A
 103 #define I2C_CH_IDT                     0x9
 104
 105 #define IDT_SERDES1_ADDRESS            0x6E
 106 #define IDT_SERDES2_ADDRESS            0x6C
 107
 108 /* Voltage monitor on channel 2*/
 109 #define I2C_MUX_CH_VOL_MONITOR          0xa
 110 #define I2C_VOL_MONITOR_ADDR            0x40
 111 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 112 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 113 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 114
 115 #define CONFIG_ZM7300
 116 #define I2C_MUX_CH_DPM                  0xa
 117 #define I2C_DPM_ADDR                    0x28
 118
 119 #define CONFIG_ENV_OVERWRITE
 120
 121 #ifdef CONFIG_SYS_NO_FLASH
 122 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 123 #define CONFIG_ENV_IS_NOWHERE
 124 #endif
 125 #else
 126 #define CONFIG_FLASH_CFI_DRIVER
 127 #define CONFIG_SYS_FLASH_CFI
 128 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 129 #endif
 130
 131 #if defined(CONFIG_SPIFLASH)
 132 #define CONFIG_SYS_EXTRA_ENV_RELOC
 133 #define CONFIG_ENV_IS_IN_SPI_FLASH
 134 #define CONFIG_ENV_SPI_BUS              0
 135 #define CONFIG_ENV_SPI_CS               0
 136 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 137 #define CONFIG_ENV_SPI_MODE             0
 138 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 139 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 140 #define CONFIG_ENV_SECT_SIZE            0x10000
 141 #elif defined(CONFIG_SDCARD)
 142 #define CONFIG_SYS_EXTRA_ENV_RELOC
 143 #define CONFIG_ENV_IS_IN_MMC
 144 #define CONFIG_SYS_MMC_ENV_DEV          0
 145 #define CONFIG_ENV_SIZE                 0x2000
 146 #define CONFIG_ENV_OFFSET               (512 * 1097)
 147 #elif defined(CONFIG_NAND)
 148 #define CONFIG_SYS_EXTRA_ENV_RELOC
 149 #define CONFIG_ENV_IS_IN_NAND
 150 #define CONFIG_ENV_SIZE                 0x2000
 151 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 152 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 153 #define CONFIG_ENV_IS_IN_REMOTE
 154 #define CONFIG_ENV_ADDR         0xffe20000
 155 #define CONFIG_ENV_SIZE         0x2000
 156 #elif defined(CONFIG_ENV_IS_NOWHERE)
 157 #define CONFIG_ENV_SIZE         0x2000
 158 #else
 159 #define CONFIG_ENV_IS_IN_FLASH
 160 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 161 #define CONFIG_ENV_SIZE         0x2000
 162 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 163 #endif
 164
 165 #ifndef __ASSEMBLY__
 166 unsigned long get_board_sys_clk(void);
 167 unsigned long get_board_ddr_clk(void);
 168 #endif
 169 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 170 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 171
 172 /*
 173  * These can be toggled for performance analysis, otherwise use default.
 174  */
 175 #define CONFIG_SYS_CACHE_STASHING
 176 #define CONFIG_BTB                      /* toggle branch predition */
 177 #define CONFIG_DDR_ECC
 178 #ifdef CONFIG_DDR_ECC
 179 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 180 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 181 #endif
 182
 183 #define CONFIG_ENABLE_36BIT_PHYS
 184
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_ADDR_MAP
 187 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 188 #endif
 189
 190 #if 0
 191 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 192 #endif
 193 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 194 #define CONFIG_SYS_MEMTEST_END          0x00400000
 195 #define CONFIG_SYS_ALT_MEMTEST
 196 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 197
 198 /*
 199  *  Config the L3 Cache as L3 SRAM
 200  */
 201 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 202 #define CONFIG_SYS_L3_SIZE              256 << 10
 203 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 204 #ifdef CONFIG_NAND
 205 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 206 #endif
 207 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 208 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 209 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 210 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 211
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define CONFIG_SYS_DCSRBAR              0xf0000000
 214 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 215 #endif
 216
 217 /* EEPROM */
 218 #define CONFIG_ID_EEPROM
 219 #define CONFIG_SYS_I2C_EEPROM_NXID
 220 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 221 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 222 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 223 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 224 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 225
 226 /*
 227  * DDR Setup
 228  */
 229 #define CONFIG_VERY_BIG_RAM
 230 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 231 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 232
 233 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 234 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 235 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 236
 237 #define CONFIG_DDR_SPD
 238 #define CONFIG_SYS_DDR_RAW_TIMING
 239 #define CONFIG_SYS_FSL_DDR3
 240 #ifndef CONFIG_SPL_BUILD
 241 #define CONFIG_FSL_DDR_INTERACTIVE
 242 #endif
 243
 244 #define CONFIG_SYS_SPD_BUS_NUM  0
 245 #define SPD_EEPROM_ADDRESS1     0x51
 246 #define SPD_EEPROM_ADDRESS2     0x53
 247
 248 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 249 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 250
 251 /*
 252  * IFC Definitions
 253  */
 254 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 255 #ifdef CONFIG_PHYS_64BIT
 256 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 257 #else
 258 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 259 #endif
 260
 261 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 262 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 263                                 + 0x8000000) | \
 264                                 CSPR_PORT_SIZE_16 | \
 265                                 CSPR_MSEL_NOR | \
 266                                 CSPR_V)
 267 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 268 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 269                                 CSPR_PORT_SIZE_16 | \
 270                                 CSPR_MSEL_NOR | \
 271                                 CSPR_V)
 272 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 273 /* NOR Flash Timing Params */
 274 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 275 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 276                                 FTIM0_NOR_TEADC(0x04) | \
 277                                 FTIM0_NOR_TEAHC(0x20))
 278 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 279                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 280                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 281 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 282                                 FTIM2_NOR_TCH(0x0E) | \
 283                                 FTIM2_NOR_TWPH(0x0E) | \
 284                                 FTIM2_NOR_TWP(0x1c))
 285 #define CONFIG_SYS_NOR_FTIM3    0x0
 286
 287 #define CONFIG_SYS_FLASH_QUIET_TEST
 288 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 289
 290 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 291 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 292 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 293 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 294
 295 #define CONFIG_SYS_FLASH_EMPTY_INFO
 296 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 297                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 298
 299 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 300 #define CONFIG_FSL_QIXIS_V2
 301 #define QIXIS_BASE              0xffdf0000
 302 #ifdef CONFIG_PHYS_64BIT
 303 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 304 #else
 305 #define QIXIS_BASE_PHYS         QIXIS_BASE
 306 #endif
 307 #define QIXIS_LBMAP_SWITCH              0x01
 308 #define QIXIS_LBMAP_MASK                0x0f
 309 #define QIXIS_LBMAP_SHIFT               0
 310 #define QIXIS_LBMAP_DFLTBANK            0x00
 311 #define QIXIS_LBMAP_ALTBANK             0x02
 312 #define QIXIS_RST_CTL_RESET             0x31
 313 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 314 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 315 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 316
 317 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 318 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 319                                 | CSPR_PORT_SIZE_8 \
 320                                 | CSPR_MSEL_GPCM \
 321                                 | CSPR_V)
 322 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 323 #define CONFIG_SYS_CSOR3        0x0
 324 /* QIXIS Timing parameters for IFC CS3 */
 325 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 326                                         FTIM0_GPCM_TEADC(0x0e) | \
 327                                         FTIM0_GPCM_TEAHC(0x0e))
 328 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 329                                         FTIM1_GPCM_TRAD(0x1f))
 330 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 331                                         FTIM2_GPCM_TCH(0x8) | \
 332                                         FTIM2_GPCM_TWP(0x1f))
 333 #define CONFIG_SYS_CS3_FTIM3            0x0
 334
 335 /* NAND Flash on IFC */
 336 #define CONFIG_NAND_FSL_IFC
 337 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 338 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 339 #define CONFIG_SYS_NAND_BASE            0xff800000
 340 #ifdef CONFIG_PHYS_64BIT
 341 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 342 #else
 343 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 344 #endif
 345
 346 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 347 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 348                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 349                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 350                                 | CSPR_V)
 351 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 352
 353 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 354                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 355                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 356                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 357                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 358                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 359                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 360
 361 #define CONFIG_SYS_NAND_ONFI_DETECTION
 362
 363 /* ONFI NAND Flash mode0 Timing Params */
 364 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 365                                         FTIM0_NAND_TWP(0x18)   | \
 366                                         FTIM0_NAND_TWCHT(0x07) | \
 367                                         FTIM0_NAND_TWH(0x0a))
 368 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 369                                         FTIM1_NAND_TWBE(0x39)  | \
 370                                         FTIM1_NAND_TRR(0x0e)   | \
 371                                         FTIM1_NAND_TRP(0x18))
 372 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 373                                         FTIM2_NAND_TREH(0x0a) | \
 374                                         FTIM2_NAND_TWHRE(0x1e))
 375 #define CONFIG_SYS_NAND_FTIM3           0x0
 376
 377 #define CONFIG_SYS_NAND_DDR_LAW         11
 378
 379 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 380 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 381 #define CONFIG_CMD_NAND
 382
 383 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 384
 385 #if defined(CONFIG_NAND)
 386 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 387 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 388 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 389 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 390 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 391 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 392 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 393 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 394 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 395 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 396 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 397 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 398 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 399 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 400 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 401 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 402 #else
 403 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 404 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 405 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 406 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 407 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 408 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 409 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 410 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 411 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 412 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 413 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 414 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 415 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 416 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 417 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 418 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 419 #endif
 420 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 421 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 422 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 423 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 424 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 425 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 426 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 427 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 428
 429 #ifdef CONFIG_SPL_BUILD
 430 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 431 #else
 432 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 433 #endif
 434
 435 #if defined(CONFIG_RAMBOOT_PBL)
 436 #define CONFIG_SYS_RAMBOOT
 437 #endif
 438
 439 #define CONFIG_BOARD_EARLY_INIT_R
 440 #define CONFIG_MISC_INIT_R
 441
 442 #define CONFIG_HWCONFIG
 443
 444 /* define to use L1 as initial stack */
 445 #define CONFIG_L1_INIT_RAM
 446 #define CONFIG_SYS_INIT_RAM_LOCK
 447 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 448 #ifdef CONFIG_PHYS_64BIT
 449 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 450 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 451 /* The assembler doesn't like typecast */
 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 453         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 454           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 455 #else
 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 457 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 459 #endif
 460 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 461
 462 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 463                                         GENERATED_GBL_DATA_SIZE)
 464 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 465
 466 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 467 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 468
 469 /* Serial Port - controlled on board with jumper J8
 470  * open - index 2
 471  * shorted - index 1
 472  */
 473 #define CONFIG_CONS_INDEX       1
 474 #define CONFIG_SYS_NS16550_SERIAL
 475 #define CONFIG_SYS_NS16550_REG_SIZE     1
 476 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 477
 478 #define CONFIG_SYS_BAUDRATE_TABLE       \
 479         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 480
 481 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 482 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 483 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 484 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 485
 486 /* I2C */
 487 #define CONFIG_SYS_I2C
 488 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 489 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 490 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 491 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 492 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 493 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 494 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 495
 496 /*
 497  * RTC configuration
 498  */
 499 #define RTC
 500 #define CONFIG_RTC_DS3231               1
 501 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 502
 503 /*
 504  * RapidIO
 505  */
 506 #ifdef CONFIG_SYS_SRIO
 507 #ifdef CONFIG_SRIO1
 508 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 509 #ifdef CONFIG_PHYS_64BIT
 510 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 511 #else
 512 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 513 #endif
 514 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 515 #endif
 516
 517 #ifdef CONFIG_SRIO2
 518 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 519 #ifdef CONFIG_PHYS_64BIT
 520 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 521 #else
 522 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 523 #endif
 524 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 525 #endif
 526 #endif
 527
 528 /*
 529  * for slave u-boot IMAGE instored in master memory space,
 530  * PHYS must be aligned based on the SIZE
 531  */
 532 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 533 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 534 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 535 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 536 /*
 537  * for slave UCODE and ENV instored in master memory space,
 538  * PHYS must be aligned based on the SIZE
 539  */
 540 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 541 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 542 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 543
 544 /* slave core release by master*/
 545 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 546 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 547
 548 /*
 549  * SRIO_PCIE_BOOT - SLAVE
 550  */
 551 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 552 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 553 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 554                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 555 #endif
 556
 557 /*
 558  * eSPI - Enhanced SPI
 559  */
 560 #define CONFIG_SF_DEFAULT_SPEED         10000000
 561 #define CONFIG_SF_DEFAULT_MODE          0
 562
 563 /*
 564  * MAPLE
 565  */
 566 #ifdef CONFIG_PHYS_64BIT
 567 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 568 #else
 569 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 570 #endif
 571
 572 /*
 573  * General PCI
 574  * Memory space is mapped 1-1, but I/O space must start from 0.
 575  */
 576
 577 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 578 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 579 #ifdef CONFIG_PHYS_64BIT
 580 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 581 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 582 #else
 583 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 584 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 585 #endif
 586 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 587 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 588 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 589 #ifdef CONFIG_PHYS_64BIT
 590 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 591 #else
 592 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 593 #endif
 594 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 595
 596 /* Qman/Bman */
 597 #ifndef CONFIG_NOBQFMAN
 598 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 599 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 600 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 601 #ifdef CONFIG_PHYS_64BIT
 602 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 603 #else
 604 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 605 #endif
 606 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 607 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 608 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 609 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 610 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 611 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 612                                         CONFIG_SYS_BMAN_CENA_SIZE)
 613 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 614 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 615 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 616 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 617 #ifdef CONFIG_PHYS_64BIT
 618 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 619 #else
 620 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 621 #endif
 622 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 623 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 624 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 625 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 626 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 627 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 628                                         CONFIG_SYS_QMAN_CENA_SIZE)
 629 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 630 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 631
 632 #define CONFIG_SYS_DPAA_FMAN
 633
 634 #define CONFIG_SYS_DPAA_RMAN
 635
 636 /* Default address of microcode for the Linux Fman driver */
 637 #if defined(CONFIG_SPIFLASH)
 638 /*
 639  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 640  * env, so we got 0x110000.
 641  */
 642 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 643 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 644 #elif defined(CONFIG_SDCARD)
 645 /*
 646  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 647  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 648  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 649  */
 650 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 651 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 652 #elif defined(CONFIG_NAND)
 653 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 654 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 655 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 656 /*
 657  * Slave has no ucode locally, it can fetch this from remote. When implementing
 658  * in two corenet boards, slave's ucode could be stored in master's memory
 659  * space, the address can be mapped from slave TLB->slave LAW->
 660  * slave SRIO or PCIE outbound window->master inbound window->
 661  * master LAW->the ucode address in master's memory space.
 662  */
 663 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 664 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 665 #else
 666 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 667 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 668 #endif
 669 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 670 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 671 #endif /* CONFIG_NOBQFMAN */
 672
 673 #ifdef CONFIG_SYS_DPAA_FMAN
 674 #define CONFIG_FMAN_ENET
 675 #define CONFIG_PHYLIB_10G
 676 #define CONFIG_PHY_VITESSE
 677 #define CONFIG_PHY_TERANETICS
 678 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 679 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 680 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 681 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 682 #endif
 683
 684 #ifdef CONFIG_PCI
 685 #define CONFIG_PCI_INDIRECT_BRIDGE
 686
 687 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 688 #define CONFIG_DOS_PARTITION
 689 #endif  /* CONFIG_PCI */
 690
 691 #ifdef CONFIG_FMAN_ENET
 692 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 693 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 694
 695 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 696 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 697 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 698
 699 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 700 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 701 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 702 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 703
 704 #define CONFIG_MII              /* MII PHY management */
 705 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 706 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 707 #endif
 708
 709 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 710
 711 /*
 712  * Environment
 713  */
 714 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 715 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 716
 717 /*
 718  * Command line configuration.
 719  */
 720 #define CONFIG_CMD_DATE
 721 #define CONFIG_CMD_EEPROM
 722 #define CONFIG_CMD_ERRATA
 723 #define CONFIG_CMD_IRQ
 724 #define CONFIG_CMD_REGINFO
 725
 726 #ifdef CONFIG_PCI
 727 #define CONFIG_CMD_PCI
 728 #endif
 729
 730 /* Hash command with SHA acceleration supported in hardware */
 731 #ifdef CONFIG_FSL_CAAM
 732 #define CONFIG_CMD_HASH
 733 #define CONFIG_SHA_HW_ACCEL
 734 #endif
 735
 736 /*
 737 * USB
 738 */
 739 #define CONFIG_HAS_FSL_DR_USB
 740
 741 #ifdef CONFIG_HAS_FSL_DR_USB
 742 #define CONFIG_USB_EHCI
 743
 744 #ifdef CONFIG_USB_EHCI
 745 #define CONFIG_USB_EHCI_FSL
 746 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 747 #endif
 748 #endif
 749
 750 /*
 751  * Miscellaneous configurable options
 752  */
 753 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 754 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 755 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 756 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 757 #ifdef CONFIG_CMD_KGDB
 758 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 759 #else
 760 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 761 #endif
 762 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 763 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 764 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 765
 766 /*
 767  * For booting Linux, the board info and command line data
 768  * have to be in the first 64 MB of memory, since this is
 769  * the maximum mapped by the Linux kernel during initialization.
 770  */
 771 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 772 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 773
 774 #ifdef CONFIG_CMD_KGDB
 775 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 776 #endif
 777
 778 /*
 779  * Environment Configuration
 780  */
 781 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 782 #define CONFIG_BOOTFILE         "uImage"
 783 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 784
 785 /* default location for tftp and bootm */
 786 #define CONFIG_LOADADDR         1000000
 787
 788
 789 #define CONFIG_BAUDRATE 115200
 790
 791 #define __USB_PHY_TYPE  ulpi
 792
 793 #ifdef CONFIG_ARCH_B4860
 794 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 795                         "bank_intlv=cs0_cs1;"   \
 796                         "en_cpc:cpc2;"
 797 #else
 798 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 799 #endif
 800
 801 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 802         HWCONFIG                                                \
 803         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 804         "netdev=eth0\0"                                         \
 805         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 806         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 807         "tftpflash=tftpboot $loadaddr $uboot && "               \
 808         "protect off $ubootaddr +$filesize && "                 \
 809         "erase $ubootaddr +$filesize && "                       \
 810         "cp.b $loadaddr $ubootaddr $filesize && "               \
 811         "protect on $ubootaddr +$filesize && "                  \
 812         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 813         "consoledev=ttyS0\0"                                    \
 814         "ramdiskaddr=2000000\0"                                 \
 815         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 816         "fdtaddr=1e00000\0"                                     \
 817         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 818         "bdev=sda3\0"
 819
 820 /* For emulation this causes u-boot to jump to the start of the proof point
 821    app code automatically */
 822 #define CONFIG_PROOF_POINTS                     \
 823  "setenv bootargs root=/dev/$bdev rw "          \
 824  "console=$consoledev,$baudrate $othbootargs;"  \
 825  "cpu 1 release 0x29000000 - - -;"              \
 826  "cpu 2 release 0x29000000 - - -;"              \
 827  "cpu 3 release 0x29000000 - - -;"              \
 828  "cpu 4 release 0x29000000 - - -;"              \
 829  "cpu 5 release 0x29000000 - - -;"              \
 830  "cpu 6 release 0x29000000 - - -;"              \
 831  "cpu 7 release 0x29000000 - - -;"              \
 832  "go 0x29000000"
 833
 834 #define CONFIG_HVBOOT   \
 835  "setenv bootargs config-addr=0x60000000; "     \
 836  "bootm 0x01000000 - 0x00f00000"
 837
 838 #define CONFIG_ALU                              \
 839  "setenv bootargs root=/dev/$bdev rw "          \
 840  "console=$consoledev,$baudrate $othbootargs;"  \
 841  "cpu 1 release 0x01000000 - - -;"              \
 842  "cpu 2 release 0x01000000 - - -;"              \
 843  "cpu 3 release 0x01000000 - - -;"              \
 844  "cpu 4 release 0x01000000 - - -;"              \
 845  "cpu 5 release 0x01000000 - - -;"              \
 846  "cpu 6 release 0x01000000 - - -;"              \
 847  "cpu 7 release 0x01000000 - - -;"              \
 848  "go 0x01000000"
 849
 850 #define CONFIG_LINUX                            \
 851  "setenv bootargs root=/dev/ram rw "            \
 852  "console=$consoledev,$baudrate $othbootargs;"  \
 853  "setenv ramdiskaddr 0x02000000;"               \
 854  "setenv fdtaddr 0x01e00000;"                   \
 855  "setenv loadaddr 0x1000000;"                   \
 856  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 857
 858 #define CONFIG_HDBOOT                                   \
 859         "setenv bootargs root=/dev/$bdev rw "           \
 860         "console=$consoledev,$baudrate $othbootargs;"   \
 861         "tftp $loadaddr $bootfile;"                     \
 862         "tftp $fdtaddr $fdtfile;"                       \
 863         "bootm $loadaddr - $fdtaddr"
 864
 865 #define CONFIG_NFSBOOTCOMMAND                   \
 866         "setenv bootargs root=/dev/nfs rw "     \
 867         "nfsroot=$serverip:$rootpath "          \
 868         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 869         "console=$consoledev,$baudrate $othbootargs;"   \
 870         "tftp $loadaddr $bootfile;"             \
 871         "tftp $fdtaddr $fdtfile;"               \
 872         "bootm $loadaddr - $fdtaddr"
 873
 874 #define CONFIG_RAMBOOTCOMMAND                           \
 875         "setenv bootargs root=/dev/ram rw "             \
 876         "console=$consoledev,$baudrate $othbootargs;"   \
 877         "tftp $ramdiskaddr $ramdiskfile;"               \
 878         "tftp $loadaddr $bootfile;"                     \
 879         "tftp $fdtaddr $fdtfile;"                       \
 880         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 881
 882 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 883
 884 #include <asm/fsl_secure_boot.h>
 885
 886 #endif  /* __CONFIG_H */