]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/EP1S10.h
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 /*------------------------------------------------------------------------
29 *----------------------------------------------------------------------*/
30 #define CONFIG_EP1S10 1 /* EP1S10 board */
31 #define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
33 #define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
34 #define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
35 #define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
37 /*------------------------------------------------------------------------
38 * CACHE -- the following will support II/s and II/f. The II/s does not
39 * have dcache, so the cache instructions will behave as NOPs.
40 *----------------------------------------------------------------------*/
41 #define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
42 #define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
43 #define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
44 #define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
46 /*------------------------------------------------------------------------
47 * MEMORY BASE ADDRESSES
48 *----------------------------------------------------------------------*/
49 #define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
50 #define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
51 #define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
52 #define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
53 #define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
54 #define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB */
56 /*------------------------------------------------------------------------
59 * -The heap is placed below the monitor.
60 * -Global data is placed below the heap.
61 * -The stack is placed below global data (&grows down).
62 *----------------------------------------------------------------------*/
63 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
64 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
65 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
67 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
68 #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
69 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
70 #define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
72 /*------------------------------------------------------------------------
74 *----------------------------------------------------------------------*/
75 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
76 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
77 #define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
78 #define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
80 /*------------------------------------------------------------------------
81 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
82 * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
83 * of flash memory. This will keep the environment in user region
84 * of flash. NOTE: the monitor length must be multiple of sector size
85 * (which is common practice).
86 *----------------------------------------------------------------------*/
87 #define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
88 #define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
89 #define CONFIG_ENV_OVERWRITE /* Serial change Ok */
90 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
92 /*------------------------------------------------------------------------
94 *----------------------------------------------------------------------*/
95 #if defined(CONFIG_CONSOLE_JTAG)
96 #define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
98 #define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
101 #define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
102 #define CONFIG_BAUDRATE 115200 /* Initial baudrate */
103 #define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
105 #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
107 /*------------------------------------------------------------------------
108 * EPCS Device -- None for stratix.
109 *----------------------------------------------------------------------*/
110 #undef CONFIG_SYS_NIOS_EPCSBASE
112 /*------------------------------------------------------------------------
114 *----------------------------------------------------------------------*/
115 #undef CONFIG_ROM_STUBS /* Stubs not in ROM */
117 /*------------------------------------------------------------------------
120 * The high res timer defaults to 1 msec. Since it includes the period
121 * registers, we can slow it down to 10 msec using TMRCNT. If the default
122 * period is acceptable, TMRCNT can be left undefined.
123 *----------------------------------------------------------------------*/
124 #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
125 #define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
126 #define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
127 #define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
128 #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
130 /*------------------------------------------------------------------------
131 * STATUS LED -- Provides a simple blinking led. For Nios2 each board
132 * must implement its own led routines -- since leds are board-specific.
133 *----------------------------------------------------------------------*/
134 #define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
135 #define CONFIG_STATUS_LED /* Enable status driver */
137 #define STATUS_LED_BIT 1 /* Bit-0 on PIO */
138 #define STATUS_LED_STATE 1 /* Blinking */
139 #define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
141 /*------------------------------------------------------------------------
142 * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
143 * and really doesn't need any additional clutter. So I choose the lazy
144 * way out to avoid changes there -- define the base address to ensure
145 * cache bypass so there's no need to monkey with inx/outx macros.
146 *----------------------------------------------------------------------*/
147 #define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
148 #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
149 #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
150 #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
152 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b
153 #define CONFIG_NETMASK 255.255.255.0
154 #define CONFIG_IPADDR 192.168.2.21
155 #define CONFIG_SERVERIP 192.168.2.16
161 #define CONFIG_BOOTP_BOOTFILESIZE
162 #define CONFIG_BOOTP_BOOTPATH
163 #define CONFIG_BOOTP_GATEWAY
164 #define CONFIG_BOOTP_HOSTNAME
168 * Command line configuration.
170 #define CONFIG_CMD_BDI
171 #define CONFIG_CMD_DHCP
172 #define CONFIG_CMD_ECHO
173 #define CONFIG_CMD_ENV
174 #define CONFIG_CMD_FLASH
175 #define CONFIG_CMD_IMI
176 #define CONFIG_CMD_IRQ
177 #define CONFIG_CMD_LOADS
178 #define CONFIG_CMD_LOADB
179 #define CONFIG_CMD_MEMORY
180 #define CONFIG_CMD_MISC
181 #define CONFIG_CMD_NET
182 #define CONFIG_CMD_PING
183 #define CONFIG_CMD_RUN
184 #define CONFIG_CMD_SAVES
187 /*------------------------------------------------------------------------
189 *----------------------------------------------------------------------*/
190 #define CONFIG_SYS_LONGHELP /* Provide extended help*/
191 #define CONFIG_SYS_PROMPT "==> " /* Command prompt */
192 #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
193 #define CONFIG_SYS_MAXARGS 16 /* Max command args */
194 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
195 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
196 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
197 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
198 #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
200 #define CONFIG_SYS_HUSH_PARSER
201 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
203 #endif /* __CONFIG_H */