include/configs/M52277EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF52277 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M52277EVB_H
  15 #define _M52277EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M52277EVB        /* M52277EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_BAUDRATE                 115200
  26
  27 #undef CONFIG_WATCHDOG
  28
  29 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35 #define CONFIG_BOOTP_BOOTPATH
  36 #define CONFIG_BOOTP_GATEWAY
  37 #define CONFIG_BOOTP_HOSTNAME
  38
  39 /* Command line configuration */
  40 #define CONFIG_CMD_CACHE
  41 #define CONFIG_CMD_DATE
  42 #define CONFIG_CMD_ELF
  43 #define CONFIG_CMD_I2C
  44 #define CONFIG_CMD_JFFS2
  45 #define CONFIG_CMD_REGINFO
  46 #undef CONFIG_CMD_USB
  47 #undef CONFIG_CMD_BMP
  48 #define CONFIG_CMD_SPI
  49 #define CONFIG_CMD_SF
  50
  51 #define CONFIG_HOSTNAME                 M52277EVB
  52 #define CONFIG_SYS_UBOOT_END            0x3FFFF
  53 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
  54 #ifdef CONFIG_SYS_STMICRO_BOOT
  55 /* ST Micro serial flash */
  56 #define CONFIG_EXTRA_ENV_SETTINGS               \
  57         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  58         "loadaddr=0x40010000\0"                 \
  59         "uboot=u-boot.bin\0"                    \
  60         "load=loadb ${loadaddr} ${baudrate};"   \
  61         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  62         "upd=run load; run prog\0"              \
  63         "prog=sf probe 0:2 10000 1;"            \
  64         "sf erase 0 30000;"                     \
  65         "sf write ${loadaddr} 0 30000;"         \
  66         "save\0"                                \
  67         ""
  68 #endif
  69 #ifdef CONFIG_SYS_SPANSION_BOOT
  70 #define CONFIG_EXTRA_ENV_SETTINGS               \
  71         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  72         "loadaddr=0x40010000\0"                 \
  73         "uboot=u-boot.bin\0"                    \
  74         "load=loadb ${loadaddr} ${baudrate}\0"  \
  75         "upd=run load; run prog\0"              \
  76         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
  77         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
  78         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
  79         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
  80         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
  81         " ${filesize}; save\0"                  \
  82         "updsbf=run loadsbf; run progsbf\0"     \
  83         "loadsbf=loadb ${loadaddr} ${baudrate};"        \
  84         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  85         "progsbf=sf probe 0:2 10000 1;"         \
  86         "sf erase 0 30000;"                     \
  87         "sf write ${loadaddr} 0 30000;"         \
  88         ""
  89 #endif
  90
  91 #define CONFIG_BOOTDELAY                3       /* autoboot after 3 seconds */
  92 /* LCD */
  93 #ifdef CONFIG_CMD_BMP
  94 #define CONFIG_LCD
  95 #define CONFIG_SPLASH_SCREEN
  96 #define CONFIG_LCD_LOGO
  97 #define CONFIG_SHARP_LQ035Q7DH06
  98 #endif
  99
 100 /* USB */
 101 #ifdef CONFIG_CMD_USB
 102 #define CONFIG_USB_EHCI
 103 #define CONFIG_USB_STORAGE
 104 #define CONFIG_DOS_PARTITION
 105 #define CONFIG_MAC_PARTITION
 106 #define CONFIG_ISO_PARTITION
 107 #define CONFIG_SYS_USB_EHCI_REGS_BASE   0xFC0B0000
 108 #define CONFIG_SYS_USB_EHCI_CPU_INIT
 109 #endif
 110
 111 /* Realtime clock */
 112 #define CONFIG_MCFRTC
 113 #undef RTC_DEBUG
 114 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 115
 116 /* Timer */
 117 #define CONFIG_MCFTMR
 118 #undef CONFIG_MCFPIT
 119
 120 /* I2c */
 121 #define CONFIG_SYS_I2C
 122 #define CONFIG_SYS_I2C_FSL
 123 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 124 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 125 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 126 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 127
 128 /* DSPI and Serial Flash */
 129 #define CONFIG_CF_SPI
 130 #define CONFIG_CF_DSPI
 131 #define CONFIG_HARD_SPI
 132 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 133 #ifdef CONFIG_CMD_SPI
 134 #       define CONFIG_SYS_DSPI_CS2
 135 #       define CONFIG_SPI_FLASH_STMICRO
 136
 137 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 138                                          DSPI_CTAR_PCSSCK_1CLK | \
 139                                          DSPI_CTAR_PASC(0) | \
 140                                          DSPI_CTAR_PDT(0) | \
 141                                          DSPI_CTAR_CSSCK(0) | \
 142                                          DSPI_CTAR_ASC(0) | \
 143                                          DSPI_CTAR_DT(1))
 144 #endif
 145
 146 /* Input, PCI, Flexbus, and VCO */
 147 #define CONFIG_EXTRA_CLOCK
 148
 149 #define CONFIG_SYS_INPUT_CLKSRC 16000000
 150
 151 #define CONFIG_PRAM             2048    /* 2048 KB */
 152
 153 #define CONFIG_SYS_PROMPT       "-> "
 154 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 155
 156 #if defined(CONFIG_CMD_KGDB)
 157 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 158 #else
 159 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 160 #endif
 161 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 162 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 163 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 164
 165 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 0x10000)
 166
 167 #define CONFIG_SYS_MBAR         0xFC000000
 168
 169 /*
 170  * Low Level Configuration Settings
 171  * (address mappings, register initial values, etc.)
 172  * You should know what you are doing if you make changes here.
 173  */
 174
 175 /*
 176  * Definitions for initial stack pointer and data area (in DPRAM)
 177  */
 178 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 179 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 180 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 181 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 182 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 32)
 183 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 184
 185 /*
 186  * Start addresses for the final memory configuration
 187  * (Set up by the startup code)
 188  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 189  */
 190 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 191 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 192 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 193 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 194 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 195 #define CONFIG_SYS_SDRAM_EMOD           0x81810000
 196 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 197 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0x00
 198
 199 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 200 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 201
 202 #ifdef CONFIG_CF_SBF
 203 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 204 #else
 205 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 206 #endif
 207 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 208 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 209 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 210
 211 /* Initial Memory map for Linux */
 212 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 213 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 214
 215 /*
 216  * Configuration for environment
 217  * Environment is not embedded in u-boot. First time runing may have env
 218  * crc error warning if there is no correct environment on the flash.
 219  */
 220 #ifdef CONFIG_CF_SBF
 221 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 222 #       define CONFIG_ENV_SPI_CS        2
 223 #else
 224 #       define CONFIG_ENV_IS_IN_FLASH   1
 225 #endif
 226 #define CONFIG_ENV_OVERWRITE            1
 227
 228 /*-----------------------------------------------------------------------
 229  * FLASH organization
 230  */
 231 #ifdef CONFIG_SYS_STMICRO_BOOT
 232 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 233 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 234 #       define CONFIG_ENV_OFFSET        0x30000
 235 #       define CONFIG_ENV_SIZE          0x1000
 236 #       define CONFIG_ENV_SECT_SIZE     0x10000
 237 #endif
 238 #ifdef CONFIG_SYS_SPANSION_BOOT
 239 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 240 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 241 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 242 #       define CONFIG_ENV_SIZE          0x1000
 243 #       define CONFIG_ENV_SECT_SIZE     0x8000
 244 #endif
 245
 246 #define CONFIG_SYS_FLASH_CFI
 247 #ifdef CONFIG_SYS_FLASH_CFI
 248 #       define CONFIG_FLASH_CFI_DRIVER  1
 249 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 250 #       define CONFIG_FLASH_SPANSION_S29WS_N    1
 251 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 252 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 253 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 254 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 255 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 256 #       define CONFIG_SYS_FLASH_CHECKSUM
 257 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
 258 #endif
 259
 260 #define LDS_BOARD_TEXT \
 261         arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
 262         arch/m68k/lib/built-in.o            (.text*)
 263
 264 /*
 265  * This is setting for JFFS2 support in u-boot.
 266  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 267  */
 268 #ifdef CONFIG_CMD_JFFS2
 269 #       define CONFIG_JFFS2_DEV         "nor0"
 270 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x40000)
 271 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000)
 272 #endif
 273
 274 /*-----------------------------------------------------------------------
 275  * Cache Configuration
 276  */
 277 #define CONFIG_SYS_CACHELINE_SIZE       16
 278
 279 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 280                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 281 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 282                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 283 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 284 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 285                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 286                                          CF_ACR_EN | CF_ACR_SM_ALL)
 287 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 288                                          CF_CACR_DISD | CF_CACR_INVI | \
 289                                          CF_CACR_CEIB | CF_CACR_DCM | \
 290                                          CF_CACR_EUSP)
 291
 292 /*-----------------------------------------------------------------------
 293  * Memory bank definitions
 294  */
 295 /*
 296  * CS0 - NOR Flash
 297  * CS1 - Available
 298  * CS2 - Available
 299  * CS3 - Available
 300  * CS4 - Available
 301  * CS5 - Available
 302  */
 303
 304 #ifdef CONFIG_CF_SBF
 305 #define CONFIG_SYS_CS0_BASE             0x04000000
 306 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 307 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 308 #else
 309 #define CONFIG_SYS_CS0_BASE             0x00000000
 310 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 311 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 312 #endif
 313
 314 #endif                          /* _M52277EVB_H */