include/configs/M5235EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF5329 FireEngine board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 /*
  27  * board/config.h - configuration options, board specific
  28  */
  29
  30 #ifndef _M5235EVB_H
  31 #define _M5235EVB_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37 #define CONFIG_MCF523x          /* define processor family */
  38 #define CONFIG_M5235            /* define processor type */
  39
  40 #define CONFIG_MCFUART
  41 #define CONFIG_SYS_UART_PORT            (0)
  42 #define CONFIG_BAUDRATE         115200
  43 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  44
  45 #undef CONFIG_WATCHDOG
  46 #define CONFIG_WATCHDOG_TIMEOUT 5000    /* timeout in milliseconds, max timeout is 6.71sec */
  47
  48 /*
  49  * BOOTP options
  50  */
  51 #define CONFIG_BOOTP_BOOTFILESIZE
  52 #define CONFIG_BOOTP_BOOTPATH
  53 #define CONFIG_BOOTP_GATEWAY
  54 #define CONFIG_BOOTP_HOSTNAME
  55
  56 /* Command line configuration */
  57 #include <config_cmd_default.h>
  58
  59 #define CONFIG_CMD_BOOTD
  60 #define CONFIG_CMD_CACHE
  61 #define CONFIG_CMD_DHCP
  62 #define CONFIG_CMD_ELF
  63 #define CONFIG_CMD_FLASH
  64 #define CONFIG_CMD_I2C
  65 #define CONFIG_CMD_MEMORY
  66 #define CONFIG_CMD_MISC
  67 #define CONFIG_CMD_MII
  68 #define CONFIG_CMD_NET
  69 #define CONFIG_CMD_PCI
  70 #define CONFIG_CMD_PING
  71 #define CONFIG_CMD_REGINFO
  72
  73 #undef CONFIG_CMD_LOADB
  74 #undef CONFIG_CMD_LOADS
  75
  76 #define CONFIG_MCFFEC
  77 #ifdef CONFIG_MCFFEC
  78 #       define CONFIG_NET_MULTI         1
  79 #       define CONFIG_MII               1
  80 #       define CONFIG_MII_INIT          1
  81 #       define CONFIG_SYS_DISCOVER_PHY
  82 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  83 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  84
  85 #       define CONFIG_SYS_FEC0_PINMUX           0
  86 #       define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
  87 #       define MCFFEC_TOUT_LOOP         50000
  88 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  89 #       ifndef CONFIG_SYS_DISCOVER_PHY
  90 #               define FECDUPLEX        FULL
  91 #               define FECSPEED         _100BASET
  92 #       else
  93 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  94 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  95 #               endif
  96 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  97 #endif
  98
  99 /* Timer */
 100 #define CONFIG_MCFTMR
 101 #undef CONFIG_MCFPIT
 102
 103 /* I2C */
 104 #define CONFIG_FSL_I2C
 105 #define CONFIG_HARD_I2C         /* I2C with hw support */
 106 #undef CONFIG_SOFT_I2C          /* I2C bit-banged */
 107 #define CONFIG_SYS_I2C_SPEED            80000
 108 #define CONFIG_SYS_I2C_SLAVE            0x7F
 109 #define CONFIG_SYS_I2C_OFFSET           0x00000300
 110 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 111 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio->par_qspi)
 112 #define CONFIG_SYS_I2C_PINMUX_CLR       ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
 113 #define CONFIG_SYS_I2C_PINMUX_SET       (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
 114
 115 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 116 #define CONFIG_BOOTDELAY        1       /* autoboot after 5 seconds */
 117 #define CONFIG_BOOTFILE         "u-boot.bin"
 118 #ifdef CONFIG_MCFFEC
 119 #       define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 120 #       define CONFIG_IPADDR    192.162.1.2
 121 #       define CONFIG_NETMASK   255.255.255.0
 122 #       define CONFIG_SERVERIP  192.162.1.1
 123 #       define CONFIG_GATEWAYIP 192.162.1.1
 124 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 125 #endif                          /* FEC_ENET */
 126
 127 #define CONFIG_HOSTNAME         M5235EVB
 128 #define CONFIG_EXTRA_ENV_SETTINGS               \
 129         "netdev=eth0\0"                         \
 130         "loadaddr=10000\0"                      \
 131         "u-boot=u-boot.bin\0"                   \
 132         "load=tftp ${loadaddr) ${u-boot}\0"     \
 133         "upd=run load; run prog\0"              \
 134         "prog=prot off ffe00000 ffe3ffff;"      \
 135         "era ffe00000 ffe3ffff;"                \
 136         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 137         "save\0"                                \
 138         ""
 139
 140 #define CONFIG_PRAM             512     /* 512 KB */
 141 #define CONFIG_SYS_PROMPT               "-> "
 142 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 143
 144 #if defined(CONFIG_KGDB)
 145 #       define CONFIG_SYS_CBSIZE                1024    /* Console I/O Buffer Size */
 146 #else
 147 #       define CONFIG_SYS_CBSIZE                256     /* Console I/O Buffer Size */
 148 #endif
 149
 150 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 151 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 152 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 153 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE+0x20000)
 154
 155 #define CONFIG_SYS_HZ                   1000
 156 #define CONFIG_SYS_CLK                  75000000
 157 #define CONFIG_SYS_CPU_CLK              CONFIG_SYS_CLK * 2
 158
 159 #define CONFIG_SYS_MBAR         0x40000000
 160
 161 /*
 162  * Low Level Configuration Settings
 163  * (address mappings, register initial values, etc.)
 164  * You should know what you are doing if you make changes here.
 165  */
 166 /*-----------------------------------------------------------------------
 167  * Definitions for initial stack pointer and data area (in DPRAM)
 168  */
 169 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 170 #define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
 171 #define CONFIG_SYS_INIT_RAM_CTRL        0x21
 172 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
 173 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE - 0x10)
 174 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 175
 176 /*-----------------------------------------------------------------------
 177  * Start addresses for the final memory configuration
 178  * (Set up by the startup code)
 179  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 180  */
 181 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 182 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 183
 184 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 185 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 186
 187 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 188 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 189
 190 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 191 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 192
 193 /*
 194  * For booting Linux, the board info and command line data
 195  * have to be in the first 8 MB of memory, since this is
 196  * the maximum mapped by the Linux kernel during initialization ??
 197  */
 198 /* Initial Memory map for Linux */
 199 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 200 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 201
 202 /*-----------------------------------------------------------------------
 203  * FLASH organization
 204  */
 205 #define CONFIG_SYS_FLASH_CFI
 206 #ifdef CONFIG_SYS_FLASH_CFI
 207 #       define CONFIG_FLASH_CFI_DRIVER  1
 208 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 209 #ifdef NORFLASH_PS32BIT
 210 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_32BIT
 211 #else
 212 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 213 #endif
 214 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 215 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 216 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 217 #endif
 218
 219 #define CONFIG_SYS_FLASH_BASE           (CONFIG_SYS_CS0_BASE)
 220
 221 /* Configuration for environment
 222  * Environment is embedded in u-boot in the second sector of the flash
 223  */
 224 #define CONFIG_ENV_IS_IN_FLASH  1
 225 #ifdef NORFLASH_PS32BIT
 226 #       define CONFIG_ENV_OFFSET                (0x8000)
 227 #       define CONFIG_ENV_SIZE          0x4000
 228 #       define CONFIG_ENV_SECT_SIZE     0x4000
 229 #else
 230 #       define CONFIG_ENV_OFFSET                (0x4000)
 231 #       define CONFIG_ENV_SIZE          0x2000
 232 #       define CONFIG_ENV_SECT_SIZE     0x2000
 233 #endif
 234
 235 /*-----------------------------------------------------------------------
 236  * Cache Configuration
 237  */
 238 #define CONFIG_SYS_CACHELINE_SIZE       16
 239
 240 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 241                                          CONFIG_SYS_INIT_RAM_END - 8)
 242 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 243                                          CONFIG_SYS_INIT_RAM_END - 4)
 244 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV)
 245 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 246                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 247                                          CF_ACR_EN | CF_ACR_SM_ALL)
 248 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_DISD | \
 249                                          CF_CACR_CEIB | CF_CACR_DCM | \
 250                                          CF_CACR_EUSP)
 251
 252 /*-----------------------------------------------------------------------
 253  * Chipselect bank definitions
 254  */
 255 /*
 256  * CS0 - NOR Flash 1, 2, 4, or 8MB
 257  * CS1 - Available
 258  * CS2 - Available
 259  * CS3 - Available
 260  * CS4 - Available
 261  * CS5 - Available
 262  * CS6 - Available
 263  * CS7 - Available
 264  */
 265 #ifdef NORFLASH_PS32BIT
 266 #       define CONFIG_SYS_CS0_BASE      0xFFC00000
 267 #       define CONFIG_SYS_CS0_MASK      0x003f0001
 268 #       define CONFIG_SYS_CS0_CTRL      0x00001D00
 269 #else
 270 #       define CONFIG_SYS_CS0_BASE      0xFFE00000
 271 #       define CONFIG_SYS_CS0_MASK      0x001f0001
 272 #       define CONFIG_SYS_CS0_CTRL      0x00001D80
 273 #endif
 274
 275 #endif                          /* _M5329EVB_H */