include/configs/M54418TWR.h

   1 /*
   2  * Configuation settings for the Freescale MCF54418 TWR board.
   3  *
   4  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54418TWR_H
  15 #define _M54418TWR_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54418TWR        /* M54418TWR board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_BAUDRATE         115200
  26 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  27
  28 #undef CONFIG_WATCHDOG
  29
  30 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  31
  32 /*
  33  * BOOTP options
  34  */
  35 #define CONFIG_BOOTP_BOOTFILESIZE
  36 #define CONFIG_BOOTP_BOOTPATH
  37 #define CONFIG_BOOTP_GATEWAY
  38 #define CONFIG_BOOTP_HOSTNAME
  39
  40 /* Command line configuration */
  41 #include <config_cmd_default.h>
  42
  43 #define CONFIG_CMD_BOOTD
  44 #define CONFIG_CMD_CACHE
  45 #undef CONFIG_CMD_DATE
  46 #define CONFIG_CMD_DHCP
  47 #define CONFIG_CMD_ELF
  48 #undef CONFIG_CMD_FLASH
  49 #undef CONFIG_CMD_I2C
  50 #undef CONFIG_CMD_JFFS2
  51 #undef CONFIG_CMD_UBI
  52 #define CONFIG_CMD_MEMORY
  53 #define CONFIG_CMD_MISC
  54 #define CONFIG_CMD_MII
  55 #undef CONFIG_CMD_NAND
  56 #undef CONFIG_CMD_NAND_YAFFS
  57 #define CONFIG_CMD_NET
  58 #define CONFIG_CMD_NFS
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_REGINFO
  61 #define CONFIG_CMD_SPI
  62 #define CONFIG_CMD_SF
  63 #undef CONFIG_CMD_IMLS
  64
  65 #undef CONFIG_CMD_LOADB
  66 #undef CONFIG_CMD_LOADS
  67
  68 /*
  69  * NAND FLASH
  70  */
  71 #ifdef CONFIG_CMD_NAND
  72 #define CONFIG_JFFS2_NAND
  73 #define CONFIG_NAND_FSL_NFC
  74 #define CONFIG_SYS_NAND_BASE            0xFC0FC000
  75 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  76 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
  77 #define CONFIG_SYS_NAND_SELECT_DEVICE
  78 #endif
  79
  80 /* Network configuration */
  81 #define CONFIG_MCFFEC
  82 #ifdef CONFIG_MCFFEC
  83 #define CONFIG_NET_MULTI                1
  84 #define CONFIG_MII                      1
  85 #define CONFIG_MII_INIT         1
  86 #define CONFIG_SYS_DISCOVER_PHY
  87 #define CONFIG_SYS_RX_ETH_BUFFER        2
  88 #define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN
  89 #define CONFIG_SYS_TX_ETH_BUFFER        2
  90 #define CONFIG_HAS_ETH1
  91
  92 #define CONFIG_SYS_FEC0_PINMUX          0
  93 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  94 #define CONFIG_SYS_FEC1_PINMUX          0
  95 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
  96 #define MCFFEC_TOUT_LOOP                50000
  97 #define CONFIG_SYS_FEC0_PHYADDR 0
  98 #define CONFIG_SYS_FEC1_PHYADDR 1
  99
 100 #define CONFIG_BOOTDELAY                2       /* autoboot after 5 seconds */
 101
 102 #ifdef  CONFIG_SYS_NAND_BOOT
 103 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \
 104                                 "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
 105                                 "-(jffs2) console=ttyS0,115200"
 106 #else
 107 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot="     \
 108                                 __stringify(CONFIG_SERVERIP) ":/tftpboot/" \
 109                                 __stringify(CONFIG_IPADDR) "  ip="      \
 110                                 __stringify(CONFIG_IPADDR) ":"  \
 111                                 __stringify(CONFIG_SERVERIP)":" \
 112                                 __stringify(CONFIG_GATEWAYIP)": "       \
 113                                 __stringify(CONFIG_NETMASK)             \
 114                                 "::eth0:off:rw console=ttyS0,115200"
 115 #endif
 116
 117 #define CONFIG_ETHADDR          00:e0:0c:bc:e5:60
 118 #define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
 119 #define CONFIG_ETHPRIME "FEC0"
 120 #define CONFIG_IPADDR           192.168.1.2
 121 #define CONFIG_NETMASK          255.255.255.0
 122 #define CONFIG_SERVERIP 192.168.1.1
 123 #define CONFIG_GATEWAYIP        192.168.1.1
 124
 125 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 126 #define CONFIG_SYS_FEC_BUF_USE_SRAM
 127 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 128 #ifndef CONFIG_SYS_DISCOVER_PHY
 129 #define FECDUPLEX       FULL
 130 #define FECSPEED        _100BASET
 131 #define LINKSTATUS      1
 132 #else
 133 #define LINKSTATUS      0
 134 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 135 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 136 #endif
 137 #endif                  /* CONFIG_SYS_DISCOVER_PHY */
 138 #endif
 139
 140 #define CONFIG_HOSTNAME         M54418TWR
 141
 142 #if defined(CONFIG_CF_SBF)
 143 /* ST Micro serial flash */
 144 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
 145 #define CONFIG_EXTRA_ENV_SETTINGS               \
 146         "netdev=eth0\0"                         \
 147         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 148         "loadaddr=0x40010000\0"                 \
 149         "sbfhdr=sbfhdr.bin\0"                   \
 150         "uboot=u-boot.bin\0"                    \
 151         "load=tftp ${loadaddr} ${sbfhdr};"      \
 152         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 153         "upd=run load; run prog\0"              \
 154         "prog=sf probe 0:1 1000000 3;"          \
 155         "sf erase 0 40000;"                     \
 156         "sf write ${loadaddr} 0 40000;"         \
 157         "save\0"                                \
 158         ""
 159 #elif defined(CONFIG_SYS_NAND_BOOT)
 160 #define CONFIG_EXTRA_ENV_SETTINGS               \
 161         "netdev=eth0\0"                         \
 162         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 163         "loadaddr=0x40010000\0"                 \
 164         "u-boot=u-boot.bin\0"                   \
 165         "load=tftp ${loadaddr} ${u-boot};\0"    \
 166         "upd=run load; run prog\0"              \
 167         "prog=nand device 0;"                   \
 168         "nand erase 0 40000;"                   \
 169         "nb_update ${loadaddr} ${filesize};"    \
 170         "save\0"                                \
 171         ""
 172 #else
 173 #define CONFIG_SYS_UBOOT_END    0x3FFFF
 174 #define CONFIG_EXTRA_ENV_SETTINGS               \
 175         "netdev=eth0\0"                         \
 176         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 177         "loadaddr=40010000\0"                   \
 178         "u-boot=u-boot.bin\0"                   \
 179         "load=tftp ${loadaddr) ${u-boot}\0"     \
 180         "upd=run load; run prog\0"              \
 181         "prog=prot off mram" " ;"       \
 182         "cp.b ${loadaddr} 0 ${filesize};"       \
 183         "save\0"                                \
 184         ""
 185 #endif
 186
 187 /* Realtime clock */
 188 #undef CONFIG_MCFRTC
 189 #define CONFIG_RTC_MCFRRTC
 190 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
 191
 192 /* Timer */
 193 #define CONFIG_MCFTMR
 194 #undef CONFIG_MCFPIT
 195
 196 /* I2c */
 197 #undef CONFIG_SYS_FSL_I2C
 198 #undef CONFIG_HARD_I2C          /* I2C with hardware support */
 199 #undef  CONFIG_SYS_I2C_SOFT     /* I2C bit-banged */
 200 /* I2C speed and slave address  */
 201 #define CONFIG_SYS_I2C_SPEED            80000
 202 #define CONFIG_SYS_I2C_SLAVE            0x7F
 203 #define CONFIG_SYS_I2C_OFFSET           0x58000
 204 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 205
 206 /* DSPI and Serial Flash */
 207 #define CONFIG_CF_SPI
 208 #define CONFIG_CF_DSPI
 209 #define CONFIG_SERIAL_FLASH
 210 #define CONFIG_HARD_SPI
 211 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 212 #ifdef CONFIG_CMD_SPI
 213 #       define CONFIG_SPI_FLASH
 214 #       define CONFIG_SPI_FLASH_ATMEL
 215
 216 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 217                                          DSPI_CTAR_PCSSCK_1CLK | \
 218                                          DSPI_CTAR_PASC(0) | \
 219                                          DSPI_CTAR_PDT(0) | \
 220                                          DSPI_CTAR_CSSCK(0) | \
 221                                          DSPI_CTAR_ASC(0) | \
 222                                          DSPI_CTAR_DT(1))
 223 #       define CONFIG_SYS_DSPI_CTAR1    (CONFIG_SYS_DSPI_CTAR0)
 224 #       define CONFIG_SYS_DSPI_CTAR2    (CONFIG_SYS_DSPI_CTAR0)
 225 #endif
 226
 227 /* Input, PCI, Flexbus, and VCO */
 228 #define CONFIG_EXTRA_CLOCK
 229
 230 #define CONFIG_PRAM                     2048    /* 2048 KB */
 231
 232 /* HUSH */
 233 #define CONFIG_SYS_HUSH_PARSER          1
 234 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 235
 236 #define CONFIG_SYS_PROMPT               "-> "
 237 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 238
 239 #if defined(CONFIG_CMD_KGDB)
 240 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 241 #else
 242 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 243 #endif
 244 /* Print Buffer Size */
 245 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 246                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 247 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 248 /* Boot Argument Buffer Size    */
 249 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 250
 251 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 252
 253 #define CONFIG_SYS_MBAR         0xFC000000
 254
 255 /*
 256  * Low Level Configuration Settings
 257  * (address mappings, register initial values, etc.)
 258  * You should know what you are doing if you make changes here.
 259  */
 260
 261 /*-----------------------------------------------------------------------
 262  * Definitions for initial stack pointer and data area (in DPRAM)
 263  */
 264 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 265 /* End of used area in internal SRAM */
 266 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 267 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 268 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
 269                                         GENERATED_GBL_DATA_SIZE) - 32)
 270 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 271 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 272
 273 /*-----------------------------------------------------------------------
 274  * Start addresses for the final memory configuration
 275  * (Set up by the startup code)
 276  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 277  */
 278 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 279 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
 280
 281 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + 0x400)
 282 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 283 #define CONFIG_SYS_DRAM_TEST
 284
 285 #if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
 286 #define CONFIG_SERIAL_BOOT
 287 #endif
 288
 289 #if defined(CONFIG_SERIAL_BOOT)
 290 #define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
 291 #else
 292 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 293 #endif
 294
 295 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
 296 /* Reserve 256 kB for Monitor */
 297 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 298 /* Reserve 256 kB for malloc() */
 299 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 300
 301 /*
 302  * For booting Linux, the board info and command line data
 303  * have to be in the first 8 MB of memory, since this is
 304  * the maximum mapped by the Linux kernel during initialization ??
 305  */
 306 /* Initial Memory map for Linux */
 307 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
 308                                 (CONFIG_SYS_SDRAM_SIZE << 20))
 309
 310 /* Configuration for environment
 311  * Environment is embedded in u-boot in the second sector of the flash
 312  */
 313 #if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
 314 #define CONFIG_SYS_NO_FLASH
 315 #define CONFIG_ENV_IS_IN_MRAM   1
 316 #define CONFIG_ENV_ADDR         (0x40000 - 0x1000) /*MRAM size 40000*/
 317 #define CONFIG_ENV_SIZE         0x1000
 318 #endif
 319
 320 #if defined(CONFIG_CF_SBF)
 321 #define CONFIG_SYS_NO_FLASH
 322 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
 323 #define CONFIG_ENV_SPI_CS               1
 324 #define CONFIG_ENV_OFFSET               0x40000
 325 #define CONFIG_ENV_SIZE         0x2000
 326 #define CONFIG_ENV_SECT_SIZE            0x10000
 327 #endif
 328 #if defined(CONFIG_SYS_NAND_BOOT)
 329 #define CONFIG_SYS_NO_FLASH
 330 #define CONFIG_ENV_IS_NOWHERE
 331 #define CONFIG_ENV_OFFSET       0x80000
 332 #define CONFIG_ENV_SIZE 0x20000
 333 #define CONFIG_ENV_SECT_SIZE    0x20000
 334 #endif
 335 #undef CONFIG_ENV_OVERWRITE
 336
 337 /* FLASH organization */
 338 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 339
 340 #undef CONFIG_SYS_FLASH_CFI
 341 #ifdef CONFIG_SYS_FLASH_CFI
 342
 343 #define CONFIG_FLASH_CFI_DRIVER 1
 344 /* Max size that the board might have */
 345 #define CONFIG_SYS_FLASH_SIZE           0x1000000
 346 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 347 /* max number of memory banks */
 348 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 349 /* max number of sectors on one chip */
 350 #define CONFIG_SYS_MAX_FLASH_SECT       270
 351 /* "Real" (hardware) sectors protection */
 352 #define CONFIG_SYS_FLASH_PROTECTION
 353 #define CONFIG_SYS_FLASH_CHECKSUM
 354 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_CS0_BASE }
 355 #else
 356 /* max number of sectors on one chip */
 357 #define CONFIG_SYS_MAX_FLASH_SECT       270
 358 /* max number of sectors on one chip */
 359 #define CONFIG_SYS_MAX_FLASH_BANKS      0
 360 #endif
 361
 362 /*
 363  * This is setting for JFFS2 support in u-boot.
 364  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 365  */
 366 #ifdef CONFIG_CMD_JFFS2
 367 #define CONFIG_JFFS2_DEV                "nand0"
 368 #define CONFIG_JFFS2_PART_OFFSET        (0x800000)
 369 #define CONFIG_CMD_MTDPARTS
 370 #define CONFIG_MTD_DEVICE
 371 #define MTDIDS_DEFAULT          "nand0=m54418twr.nand"
 372
 373 #define MTDPARTS_DEFAULT        "mtdparts=m54418twr.nand:1m(data),"     \
 374                                                 "7m(kernel),"           \
 375                                                 "-(rootfs)"
 376
 377 #endif
 378
 379 #ifdef CONFIG_CMD_UBI
 380 #define CONFIG_CMD_MTDPARTS
 381 #define CONFIG_MTD_DEVICE       /* needed for mtdparts command */
 382 #define CONFIG_MTD_PARTITIONS   /* mtdparts and UBI support */
 383 #define CONFIG_RBTREE
 384 #define MTDIDS_DEFAULT          "nand0=NAND"
 385 #define MTDPARTS_DEFAULT        "mtdparts=NAND:1m(u-boot),"     \
 386                                         "-(ubi)"
 387 #endif
 388 /* Cache Configuration */
 389 #define CONFIG_SYS_CACHELINE_SIZE       16
 390 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 391                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 392 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 393                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 394 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 395 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 396 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 397                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 398                                          CF_ACR_EN | CF_ACR_SM_ALL)
 399 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 400                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 401 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 402                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 403                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 404
 405 #define CACR_STATUS     (CONFIG_SYS_INIT_RAM_ADDR + \
 406                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 407
 408 /*-----------------------------------------------------------------------
 409  * Memory bank definitions
 410  */
 411 /*
 412  * CS0 - NOR Flash 16MB
 413  * CS1 - Available
 414  * CS2 - Available
 415  * CS3 - Available
 416  * CS4 - Available
 417  * CS5 - Available
 418  */
 419
 420  /* Flash */
 421 #define CONFIG_SYS_CS0_BASE             0x00000000
 422 #define CONFIG_SYS_CS0_MASK             0x000F0101
 423 #define CONFIG_SYS_CS0_CTRL             0x00001D60
 424
 425 #endif                          /* _M54418TWR_H */