include/configs/M54418TWR.h

   1 /*
   2  * Configuation settings for the Freescale MCF54418 TWR board.
   3  *
   4  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54418TWR_H
  15 #define _M54418TWR_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54418TWR        /* M54418TWR board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  26
  27 #undef CONFIG_WATCHDOG
  28
  29 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35 #define CONFIG_BOOTP_BOOTPATH
  36 #define CONFIG_BOOTP_GATEWAY
  37 #define CONFIG_BOOTP_HOSTNAME
  38
  39 /* Command line configuration */
  40 #undef CONFIG_CMD_JFFS2
  41 #undef CONFIG_CMD_NAND
  42 #define CONFIG_CMD_REGINFO
  43
  44 /*
  45  * NAND FLASH
  46  */
  47 #ifdef CONFIG_CMD_NAND
  48 #define CONFIG_JFFS2_NAND
  49 #define CONFIG_NAND_FSL_NFC
  50 #define CONFIG_SYS_NAND_BASE            0xFC0FC000
  51 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  52 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
  53 #define CONFIG_SYS_NAND_SELECT_DEVICE
  54 #endif
  55
  56 /* Network configuration */
  57 #define CONFIG_MCFFEC
  58 #ifdef CONFIG_MCFFEC
  59 #define CONFIG_MII                      1
  60 #define CONFIG_MII_INIT         1
  61 #define CONFIG_SYS_DISCOVER_PHY
  62 #define CONFIG_SYS_RX_ETH_BUFFER        2
  63 #define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN
  64 #define CONFIG_SYS_TX_ETH_BUFFER        2
  65 #define CONFIG_HAS_ETH1
  66
  67 #define CONFIG_SYS_FEC0_PINMUX          0
  68 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  69 #define CONFIG_SYS_FEC1_PINMUX          0
  70 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
  71 #define MCFFEC_TOUT_LOOP                50000
  72 #define CONFIG_SYS_FEC0_PHYADDR 0
  73 #define CONFIG_SYS_FEC1_PHYADDR 1
  74
  75
  76 #ifdef  CONFIG_SYS_NAND_BOOT
  77 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \
  78                                 "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
  79                                 "-(jffs2) console=ttyS0,115200"
  80 #else
  81 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot="     \
  82                                 __stringify(CONFIG_SERVERIP) ":/tftpboot/" \
  83                                 __stringify(CONFIG_IPADDR) "  ip="      \
  84                                 __stringify(CONFIG_IPADDR) ":"  \
  85                                 __stringify(CONFIG_SERVERIP)":" \
  86                                 __stringify(CONFIG_GATEWAYIP)": "       \
  87                                 __stringify(CONFIG_NETMASK)             \
  88                                 "::eth0:off:rw console=ttyS0,115200"
  89 #endif
  90
  91 #define CONFIG_ETHPRIME "FEC0"
  92 #define CONFIG_IPADDR           192.168.1.2
  93 #define CONFIG_NETMASK          255.255.255.0
  94 #define CONFIG_SERVERIP 192.168.1.1
  95 #define CONFIG_GATEWAYIP        192.168.1.1
  96
  97 #define CONFIG_SYS_FEC_BUF_USE_SRAM
  98 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  99 #ifndef CONFIG_SYS_DISCOVER_PHY
 100 #define FECDUPLEX       FULL
 101 #define FECSPEED        _100BASET
 102 #define LINKSTATUS      1
 103 #else
 104 #define LINKSTATUS      0
 105 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 106 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 107 #endif
 108 #endif                  /* CONFIG_SYS_DISCOVER_PHY */
 109 #endif
 110
 111 #define CONFIG_HOSTNAME         M54418TWR
 112
 113 #if defined(CONFIG_CF_SBF)
 114 /* ST Micro serial flash */
 115 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
 116 #define CONFIG_EXTRA_ENV_SETTINGS               \
 117         "netdev=eth0\0"                         \
 118         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 119         "loadaddr=0x40010000\0"                 \
 120         "sbfhdr=sbfhdr.bin\0"                   \
 121         "uboot=u-boot.bin\0"                    \
 122         "load=tftp ${loadaddr} ${sbfhdr};"      \
 123         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 124         "upd=run load; run prog\0"              \
 125         "prog=sf probe 0:1 1000000 3;"          \
 126         "sf erase 0 40000;"                     \
 127         "sf write ${loadaddr} 0 40000;"         \
 128         "save\0"                                \
 129         ""
 130 #elif defined(CONFIG_SYS_NAND_BOOT)
 131 #define CONFIG_EXTRA_ENV_SETTINGS               \
 132         "netdev=eth0\0"                         \
 133         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 134         "loadaddr=0x40010000\0"                 \
 135         "u-boot=u-boot.bin\0"                   \
 136         "load=tftp ${loadaddr} ${u-boot};\0"    \
 137         "upd=run load; run prog\0"              \
 138         "prog=nand device 0;"                   \
 139         "nand erase 0 40000;"                   \
 140         "nb_update ${loadaddr} ${filesize};"    \
 141         "save\0"                                \
 142         ""
 143 #else
 144 #define CONFIG_SYS_UBOOT_END    0x3FFFF
 145 #define CONFIG_EXTRA_ENV_SETTINGS               \
 146         "netdev=eth0\0"                         \
 147         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 148         "loadaddr=40010000\0"                   \
 149         "u-boot=u-boot.bin\0"                   \
 150         "load=tftp ${loadaddr) ${u-boot}\0"     \
 151         "upd=run load; run prog\0"              \
 152         "prog=prot off mram" " ;"       \
 153         "cp.b ${loadaddr} 0 ${filesize};"       \
 154         "save\0"                                \
 155         ""
 156 #endif
 157
 158 /* Realtime clock */
 159 #undef CONFIG_MCFRTC
 160 #define CONFIG_RTC_MCFRRTC
 161 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
 162
 163 /* Timer */
 164 #define CONFIG_MCFTMR
 165 #undef CONFIG_MCFPIT
 166
 167 /* I2c */
 168 #undef CONFIG_SYS_FSL_I2C
 169 #undef  CONFIG_SYS_I2C_SOFT     /* I2C bit-banged */
 170 /* I2C speed and slave address  */
 171 #define CONFIG_SYS_I2C_SPEED            80000
 172 #define CONFIG_SYS_I2C_SLAVE            0x7F
 173 #define CONFIG_SYS_I2C_OFFSET           0x58000
 174 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 175
 176 /* DSPI and Serial Flash */
 177 #define CONFIG_CF_SPI
 178 #define CONFIG_CF_DSPI
 179 #define CONFIG_SERIAL_FLASH
 180 #define CONFIG_HARD_SPI
 181 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 182 #ifdef CONFIG_CMD_SPI
 183
 184 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 185                                          DSPI_CTAR_PCSSCK_1CLK | \
 186                                          DSPI_CTAR_PASC(0) | \
 187                                          DSPI_CTAR_PDT(0) | \
 188                                          DSPI_CTAR_CSSCK(0) | \
 189                                          DSPI_CTAR_ASC(0) | \
 190                                          DSPI_CTAR_DT(1))
 191 #       define CONFIG_SYS_DSPI_CTAR1    (CONFIG_SYS_DSPI_CTAR0)
 192 #       define CONFIG_SYS_DSPI_CTAR2    (CONFIG_SYS_DSPI_CTAR0)
 193 #endif
 194
 195 /* Input, PCI, Flexbus, and VCO */
 196 #define CONFIG_EXTRA_CLOCK
 197
 198 #define CONFIG_PRAM                     2048    /* 2048 KB */
 199
 200 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 201
 202 #if defined(CONFIG_CMD_KGDB)
 203 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 204 #else
 205 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 206 #endif
 207 /* Print Buffer Size */
 208 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 209                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 210 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 211 /* Boot Argument Buffer Size    */
 212 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 213
 214 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 215
 216 #define CONFIG_SYS_MBAR         0xFC000000
 217
 218 /*
 219  * Low Level Configuration Settings
 220  * (address mappings, register initial values, etc.)
 221  * You should know what you are doing if you make changes here.
 222  */
 223
 224 /*-----------------------------------------------------------------------
 225  * Definitions for initial stack pointer and data area (in DPRAM)
 226  */
 227 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 228 /* End of used area in internal SRAM */
 229 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 230 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 231 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
 232                                         GENERATED_GBL_DATA_SIZE) - 32)
 233 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 234 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 235
 236 /*-----------------------------------------------------------------------
 237  * Start addresses for the final memory configuration
 238  * (Set up by the startup code)
 239  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 240  */
 241 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 242 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
 243
 244 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + 0x400)
 245 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 246 #define CONFIG_SYS_DRAM_TEST
 247
 248 #if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
 249 #define CONFIG_SERIAL_BOOT
 250 #endif
 251
 252 #if defined(CONFIG_SERIAL_BOOT)
 253 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
 254 #else
 255 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 256 #endif
 257
 258 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
 259 /* Reserve 256 kB for Monitor */
 260 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 261 /* Reserve 256 kB for malloc() */
 262 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 263
 264 /*
 265  * For booting Linux, the board info and command line data
 266  * have to be in the first 8 MB of memory, since this is
 267  * the maximum mapped by the Linux kernel during initialization ??
 268  */
 269 /* Initial Memory map for Linux */
 270 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
 271                                 (CONFIG_SYS_SDRAM_SIZE << 20))
 272
 273 /* Configuration for environment
 274  * Environment is embedded in u-boot in the second sector of the flash
 275  */
 276 #if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
 277 #define CONFIG_ENV_IS_IN_MRAM   1
 278 #define CONFIG_ENV_ADDR         (0x40000 - 0x1000) /*MRAM size 40000*/
 279 #define CONFIG_ENV_SIZE         0x1000
 280 #endif
 281
 282 #if defined(CONFIG_CF_SBF)
 283 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
 284 #define CONFIG_ENV_SPI_CS               1
 285 #define CONFIG_ENV_OFFSET               0x40000
 286 #define CONFIG_ENV_SIZE         0x2000
 287 #define CONFIG_ENV_SECT_SIZE            0x10000
 288 #endif
 289 #if defined(CONFIG_SYS_NAND_BOOT)
 290 #define CONFIG_ENV_IS_NOWHERE
 291 #define CONFIG_ENV_OFFSET       0x80000
 292 #define CONFIG_ENV_SIZE 0x20000
 293 #define CONFIG_ENV_SECT_SIZE    0x20000
 294 #endif
 295 #undef CONFIG_ENV_OVERWRITE
 296
 297 /* FLASH organization */
 298 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 299
 300 #undef CONFIG_SYS_FLASH_CFI
 301 #ifdef CONFIG_SYS_FLASH_CFI
 302
 303 #define CONFIG_FLASH_CFI_DRIVER 1
 304 /* Max size that the board might have */
 305 #define CONFIG_SYS_FLASH_SIZE           0x1000000
 306 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 307 /* max number of memory banks */
 308 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 309 /* max number of sectors on one chip */
 310 #define CONFIG_SYS_MAX_FLASH_SECT       270
 311 /* "Real" (hardware) sectors protection */
 312 #define CONFIG_SYS_FLASH_PROTECTION
 313 #define CONFIG_SYS_FLASH_CHECKSUM
 314 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_CS0_BASE }
 315 #else
 316 /* max number of sectors on one chip */
 317 #define CONFIG_SYS_MAX_FLASH_SECT       270
 318 /* max number of sectors on one chip */
 319 #define CONFIG_SYS_MAX_FLASH_BANKS      0
 320 #endif
 321
 322 /*
 323  * This is setting for JFFS2 support in u-boot.
 324  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 325  */
 326 #ifdef CONFIG_CMD_JFFS2
 327 #define CONFIG_JFFS2_DEV                "nand0"
 328 #define CONFIG_JFFS2_PART_OFFSET        (0x800000)
 329 #define CONFIG_CMD_MTDPARTS
 330 #define CONFIG_MTD_DEVICE
 331 #define MTDIDS_DEFAULT          "nand0=m54418twr.nand"
 332
 333 #define MTDPARTS_DEFAULT        "mtdparts=m54418twr.nand:1m(data),"     \
 334                                                 "7m(kernel),"           \
 335                                                 "-(rootfs)"
 336
 337 #endif
 338
 339 #ifdef CONFIG_CMD_UBI
 340 #define CONFIG_CMD_MTDPARTS
 341 #define CONFIG_MTD_DEVICE       /* needed for mtdparts command */
 342 #define CONFIG_MTD_PARTITIONS   /* mtdparts and UBI support */
 343 #define CONFIG_RBTREE
 344 #define MTDIDS_DEFAULT          "nand0=NAND"
 345 #define MTDPARTS_DEFAULT        "mtdparts=NAND:1m(u-boot),"     \
 346                                         "-(ubi)"
 347 #endif
 348 /* Cache Configuration */
 349 #define CONFIG_SYS_CACHELINE_SIZE       16
 350 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 351                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 352 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 353                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 354 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 355 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 356 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 357                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 358                                          CF_ACR_EN | CF_ACR_SM_ALL)
 359 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 360                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 361 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 362                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 363                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 364
 365 #define CACR_STATUS     (CONFIG_SYS_INIT_RAM_ADDR + \
 366                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 367
 368 /*-----------------------------------------------------------------------
 369  * Memory bank definitions
 370  */
 371 /*
 372  * CS0 - NOR Flash 16MB
 373  * CS1 - Available
 374  * CS2 - Available
 375  * CS3 - Available
 376  * CS4 - Available
 377  * CS5 - Available
 378  */
 379
 380  /* Flash */
 381 #define CONFIG_SYS_CS0_BASE             0x00000000
 382 #define CONFIG_SYS_CS0_MASK             0x000F0101
 383 #define CONFIG_SYS_CS0_CTRL             0x00001D60
 384
 385 #endif                          /* _M54418TWR_H */